2. It is a measuring instrument used to record the amount of
electrical consumption.
A. clamp meter B. micrometer
B.micrometer
C. steel rule
D. electric meter​

Answers

Answer 1

Answer:

The correct option is;

D. Electric meter

Explanation:

An electric meter is a metering device that is used for the measurement of the electric power consumption of an electrical powered tools, a living space or a building

Electric meter readings are used by electric utility company to sell electric power to consumers at a given rate such that it allows the electric utility company to receive payment for the total power supplied, and for the consumer to regulate the amount of power consumed

The electric meters are usually calibrated in kilowatt hour (kWh) and prepaid meter displays the amount of units of power bought, while post paid meters are usually read once each billing period which is usually one month.


Related Questions

Which of these is a unit of heat?
A.
joule
B.
watt
C.
kelvin
D.
joule/kelvin
E.
mole

Answers

Answer:

D

Explanation:

Both the joule and the kelvin represent heat. Kelvin is a unit of measurement for temperature and joule is more heat energy.

Answer:

Joules

Explanation:

It's heat

How did Ronald McNair change the face of science?

Answers

Answer: Through Physics

Explanation:

He changed the world of science through laser physics, he had a phD in science.

What he really did was amazing where he focused on such tasks as the development of lasers for isotope separation and conducted research on electro-optic modulation for satellite space communications.

He was also a astronaut for the 1986 space module Challenger. Sadly, Challenger exploded due a malfunctioning in the tank, it overheated and killed the entire crew along with Mr.Ronald.

Hope this helps and make sure to thank me!

Which of the following sentences are written correctly verbs

Answers

What are the sentences to answer the question?

I need help... What is Torque?

Answers

Answer:

a twisting force that tends to cause rotation

Explanation:

Answer:  a force that causes something to rotate

Explanation:

Which of the following is NOT an example of a direct cost of workplace injuries?

Medical expenses

Workers’ compensation payments

Cost for legal services

Lost productivity

Answers

Answer:

Lost productivity

What is a smooth flow of air over a surface is called?

Answers

Answer:

laminar flow

Explanation:

In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing.

⚠️I MARK BRAINLIST I AM BRING TIMED PIC INCLUDED⚠️Match the stage of the product development life cycle to the product that best represents it.
building complex systems
car engines employed for more than one model
reusing technology
sophisticated jet airliners
pushing a technology to market
the latest iPhone version

Answers

Sophisticated jet airliners
Car engines for more than one model
The latest iPhone model

Can someone teach me how to find all valid minterms of any given truth table?

Answers

Explanation:

A minterm is a product of variables, in which each variable appears exactly once, either complemented or not. When a truth table is represented in a sum of products form, there is one minterm for each line in the table for which the output is True (1).

Suppose I have a truth table as follows, with inputs A, B and output Z.

  AB Z

  00 1

  01 0

  10 1

  11 0

When I write the minterms, I use a complemented variable where the input is 0, and an uncomplemented variable where the input is 1. The minterm is expressed as a product of those variables.

Here, there are 2 lines in the table with outputs Z=1. The input conditions AB for those outputs are 00 and 10, so the corresponding minterms are A'B' and AB', where the apostrophe indicates the variable is complemented.

This table is then represented by the sum of products ...

  Z = A'B' + AB'

You have all of the valid minterms when you have one for each line of the table where the output is 1.

__

Comment on truth table representation

Truth tables can be represented a number of ways. A nice representation for the purpose of identifying minterms is a list of the output for every possible combination of inputs. We have used that form above.

Sometimes, you may see minterms listed as decimal numbers in the range of 0 to 2^n -1 when there are n input variables. Then, the minterms are developed from the binary equivalents of those decimal numbers.

Example:

Logic with 4 input variables has minterms 7, 8, and 15. The binary equivalents of these numbers are 0111, 1000, 1111. The corresponding minterms (for inputs a, b, c, d) are a'bcd + ab'c'd' + abcd = z. Three numbers are listed, so we know we have all of the valid minterms when we have three corresponding minterms.

__

Additional comment

In some cases, outputs will be listed as "don't care." Another set of minterms can be generated for the don't cares. These can be used in the logic minimization process.

What is the potential consequence of online impulsive buying?
a.
Better managed monthly budget
b.
Tendency to buy unnecessary goods
C.
Wiser decision making when purchasing
d.
Earned discount vouchers from the store

Answers

Probably B because I impulsively shop online and b is true for me. I’m not 100% sure though.
I’m pretty sure it’s B

Why are the main cables of the Golden Gate Bridge made of numerous smaller cables?

Answers

Answer:

The main cables of the Golden Gate Bridge are made of numerous smaller cables because by combining several thousand in number of smaller cables, each having a diameter which is approximately the diameter of a pencil, into the required cable diameter dimensions, the flexibility, strength, resistance to cracking, rotation resistance, crushing resistance and fatigue resistance of the main cables are increased, and failure of a few strands in a multi-stranded cable is more likely to be detected before catastrophic failure takes place than in a single cable

The properties of strength and flexibility that the cable provides are required so that the bridge can better cushion the seismic turbulence of the water and strong wind energy at the bay of San Francisco, the location of the bridge

Explanation:

⚠️I MARK BRAINLIST HELP I AM BEING TIMED-included a pic ⚠️The "Big Dig" in Boston, Massachusetts, redesigned the entire highway system in the city, moving roads underground in many areas. The "Big
Dig" could be considered a low-risk project because of the complex engineering and construction challenges.
True
O False
Next
Sub
Save and Exit
Mark this and return

Answers

The answer to this question is True

Answer:

False

Explanation:

Just took the test (edge 2021)

According to one government agency, bad housekeeping is estimated to cause what percentage
of all slip, trip and fall injuries?
O 35%
O 40%
O 50%
O 65%
O 80%

Answers

It’s 50 percent 99 percent sure

The ________________ attraction between the Earth and the moon is ______________ on the side of the Earth that happens to be ____________ the moon, simply because it is ________. This attraction causes the water on this “_________” of Earth to be pulled ___________ the moon.

Answers

Answer:

Gravitational; strongest; facing; closer; near side; toward.

Explanation:

The gravitational attraction between the Earth and the moon is strongest on the side of the Earth that happens to be facing the moon, simply because it is closer. This attraction causes the water on this “near side” of Earth to be pulled toward the moon. These forces of attraction and inertia tends to keep the water in place and consequently, leads to a bulge of water on the near side with respect to the moon.

Also, you should note that what is responsible for the moon being in orbit around the Earth is the gravitational force of attraction between the two planetary bodies (Earth and Moon).

PLEASE HELP!! Its easy!!!

Answers

Answer:

C is tire

F is cassette

D is hub

Answer: give me brainliest, fellow hamster friend

Explanation:

Is a desk/table a solid, frame, shell or combination

Answers

The desk is a solid

can you help me with the engineering

Answers

Answer:

maybe depends on what it is about lol

a torque of 24 ft pounds is the result when a force of ______ pounds is applied to a wrench that is 18 inches long.​

Answers

Answer:

  16

Explanation:

The product of feet and pounds is the torque. 18 inches is 1.5 feet.

  (1.5 ft)(x lbs) = 24 ft·lbs

  x lbs = (24 ft·lbs)/(1.5 ft) = 16 lbs

The force will be 16 pounds applied to an 18-inch wrench to obtain 24 ft·lbs.

Answer:

16

Explanation:

Which activity is unethical when using a public Internet access terminal? NULL 2
a.
Participate in public online surveys
b.
Offer movie links to friends in other countries
C.
Upload huge video file onto video sharing website
d.
Share personal photos on social networking site

Answers

Answer: C

Explanation:

Uploading a huge file on the internet will slow it down alot

if when you put your shirt in your pants, your shirt is tucked, does that mean when your shirt is over your pants, your pants are tucked into your shirt...?

Answers

Answer:

confusing, but yes

Explanation:

your shirt is over you pants I believe.

which of the following best describes the mechanical energy of an object?

Answers

In other words, an object possesses mechanical energy when it has the ability to do work due to its position or motion. Mechanical energy can take the form of either kinetic energy, which is energy due to an object's motion, or potential energy, which is stored energy due to an object's position.

Some examples of mechanical energy are:

Hydro power plantCyclingWrecking balls, etc

What is Mechanical Energy?

This refers to the type of energy that an object or mass possesses based on its motion and can either be potential or kinetic energy.

Therefore, mechanical energy can be represented mathematically as: [tex]E_{mechanical}[/tex] = U + K

Where U= potential energy

K= kinetic energy

Read more about mechanical energy here:

https://brainly.com/question/24443465

#SPJ2

PLEASE HELP ME!!!!!! 100 POINTS FOR HELPFUL ANSWERS + BRAINLIEST!!!!!

So I do the dishes daily for my chores, and no one in my household rinses their dishes or even scrapes the food into the trash, so it is inevitable that some food will end up down the drain.

In my case since no one else does anything to prevent food from clogging the sink, I am the one blamed for when it gets clogged up. Well my parents got fed up with fixing it so as punishment my parents sent me outside and are making me write an essay on:

How sink drains can get clogged up and meathods to fix them

(this has to be completed before I come back inside).

NOTE: PLEASE DO NOT COPY AND PASTE MY PARENTS WILL CHECK FOR PLAGARISM!!! (ALSO ITS GETTING COLD OUT HERE SO PLEASE HELP!!)

ALSO: PLEASE if you do not have an answer do not answer the question, it takes away the ability for others to help me! if you want to say something put it in the comments below please. ∨

Answers

Answer:

well you could get some green goblin it disolves all the c rap in sink

Explanation:

Answer:

I'm sorry this is happening to you I had this happen to me before but, in another scenario. So I will try my best to help you.

Explanation:

You can start by apologizing even tho its not your fault. Then you can go into detail step by step on how u will make sure this wont happen again. If needed you can search up different ways on how to clean a drain. You can use drain clean and if u have one of tho disposable things this might help. You can then ask or tell them very respectfully "It would help me even more I you guys can throw your food in the sink before putting it into the sink. Also, you could do it yourself If necessary, and throw away the food yourself from the sink. Both me and my sister have to do this or we will get yelled out so I completely understand.

Add (6x^2-2x) + (5x-7)

Answers

The answer would be 6x^2 +3x-7

Answer:

6x²+3x-7

Explanation:

Simpify the equation, then u get the ans.

How many parts (screws and bolts included) does the average car have?

Answers

Answer:

Explanation:

30,000 parts

A single car has about 30,000 parts, counting every part down to the smallest screws.

The total number of parts (screws and bolts included) of the average car is around 30,000.

What are the basic parts of the car?

The radiator can be described as a heat exchanger used to eliminate heat from the coolant in the cooling system to prevent the vehicle’s engine from overheating. The hot coolant is routed via the radiator, where the coolant exchange heat with the passing air.

The AC Compressor pumps coolant throughout the system and starts the process of the cooling car. The battery saves energy in chemical form so it is released as electricity to run the vehicle’s electrical components.

The front and rear axles are supporting a vehicle where the wheel hubs are attached. Axles are part of the suspension system and are responsible for delivering power to the wheels from the engine via the transmission and differential.

A car’s brakes can be used to stop or slow a vehicle or prevent it from moving when parked or stopped.

Learn more about parts of automobiles, here:

https://brainly.com/question/800372

#SPJ2

How much salt will one teaspoon of water dissolve? Complete this experiment to find out!

Materials:

salt
a small glass jar with a lid
water
measuring spoons
Follow these steps:

Carefully measure out 3 Tablespoons of cold water into the jar.
Now measure out 1/8 teaspoon of salt and put it into the jar with the water. Put the lid on the container and shake it. Keep shaking until the salt is completely dissolved. To determine whether it has completely dissolved, hold the container up to the light and look carefully at the bottom, or open the lid and look into it. If you see little grains of salt there, it is not completely dissolved, so keep shaking until it looks the same each time you look.
If the salt does not dissolve completely after five minutes of vigorous shaking, write this in your notebook and go on to step 4. If the salt dissolves completely, add another 1/8 teaspoon of salt and repeat the process. Repeat over and over, keeping track of how many 1/8 teaspoons you add. Stop when you can’t get the salt to dissolve no matter how hard or long you shake the container.
Record how much salt you were able to dissolve in the 3 Tablespoons of water in the solubility data table.
Repeat steps 1-4, but this time using very warm or hot water. Before you do it, run the jar under hot water to warm it up so the water doesn’t cool off right away. Be sure to use the exact same amounts of water and salt as you did the first time. The only variable should be the temperature of the water.
Record your results, and then compare with your previous results.
Answer the following questions:

Were there any differences in the amount of salt that dissolved in the warm water versus the cold water?

Write a conclusion based on your results, using the terms “temperature” and “solubility.”

Based on your results, answer this question: If the oceans of the earth got warmer from global warming, would the water of the oceans become more or less salty? What do you think the effect of this change in the ocean salinity (saltiness) would be on the plants and animals that live in the ocean?

Once you have completed the activity and answered all the questions, turn your assignment in here. To see how this assignment will be graded, click tHow much salt will one teaspoon of water dissolve?

Answers

Answer:it took 4 1/8th teaspoons

Explanation:

Answer:

The answer is on the document (not a link and won't break your device, promise).

Explanation:

The Marion County School District is planning to build a new elementary school near a commercial district. Which of the following types of construction companies would be best for the job?
A.Commercial
B.Institutional
C.Residential
D.Industrial

Answers

Answer:

B or C

Explanation:

Commercial has to be for things like political  and industrial is for making/providing things

C IT MAKES the most sense

DEFINE NEUTRALIZATION REATION?​

Answers

Answer:

I would go with when acid and a base react quantitatively with each other. as my answer for that

Neutralisation reactions are when reactants such as acids with bases forms salt and water.
Please mark me brainliest:)

Which option explains why Tyler is impressed in the following scenario?
Tyler's dishwasher recently stopped working. As he was browsing some of the newer models in the store, he was thrilled with what they offered.


The newer dishwasher models were much less expensive due to recent changes in sustainability.

The efficiency rating of the dishwasher was significantly improved, meaning it would save him money and be more eco-friendly.

Engineers were able to design dishwasher models with superficial changes, making them look more attractive.

Due to newly developed products, there was a much wider variety of energy-efficient dishwashers available.

Answers

Answer:

Its B).  The efficiency rating of the dishwasher was significantly improved, meaning it would save him money and be more eco-friendly.

Explanation:

On EDG

Answer:

It's B) i just did it in edg

Explanation:

Question # 7
Long Text (essay)

In paragraph of 125 words, explain at least three ways that engineers explore possible solutions in their projects

Answers

Answer:

To do this, engineers often use a technique called "brainstorming." Brainstorming is a team creativity activity that helps you generate a large number of potential solutions to a problem or challenge.

Engineers use the engineering design process when brainstorming solutions to real-life problems; they develop these solutions by testing and redesigning prototypes that work within given constraints.

Engineers will often use reverse-engineering to solve problems. For example, by taking things apart to determine an issue, finding a solution and then putting the object back together again. Engineers know how things work, and so they constantly analyse things and discover how they work.

Safeguarding personal data and personal wealth from cyberattacks. ...

Addressing climate change through engineering innovation. ...

Feeding the growing world population through cutting-edge bio-engineering and agricultural innovations. ...

Improving health and well-being through life sciences, nanotechnology, and bio engineering.

MARK ME AS BRAINLIST

Answer:

1) Prototyping is the process of experimental testing of samples of design, or model of a product with the possibility of the inclusion of control of parameters in order to determine the workability of a solution.

2) Simulation is the process of creating an imitation of a situation, operation or process which can be used to determine if a particular solution will be able to work as required in the simulated environment of a problem.

3) Calculations are used to find preliminary results of particular situations, their cause and effects based on scientific laws, theories and hypothesis such that the factor of the problem is equated with the available ideas to find the best possible solution.

Explanation:

What is the difference between Material Safety Data Sheets and Safety Data Sheets?

Safety Data Sheets do not include protective measures

Safety Data Sheets do not include health effects

Safety Data Sheets must have 16 user-friendly sections

There are no differences

Answers

Answer:

MSDS is Material Safety Data Sheets, whereas SDS just Safety Data Sheets

Explanation:

A: i do not know what answer is

During the production of a mobile phone, the manufacturing company stops the assembly line because it has run out of a particular raw material. What kind of waste is this?
A.
transportation
B.
overproduction
C.
over-processing
D.
motion
E.
waiting

Answers

Answer:

B. or C.

Explanation:

You have to guess one of them. sry

Other Questions
A simple random sample of size n=36 is obtained from a population that is skewed right with =87 and =24. (a) describe the sampling distribution of x. When defining the views on Federalism, match the following view with the correct description.1. Cooperative "Marble Cake"2. Dual "Layer Cake"3. New4. Permissivea. States only have rights as granted by the federal governmentb. States receive greater responsibility and funding for programsc. Federal and state governments are distinct and separate spheresd. Interwoven and interdependent federal and state governments In Problem 1-20 determine the Laplace transform of the given function using Table 7.1 on page 356 and the properties of the transform given in Table 7.2. [Hint: In Problems 12-20, use an appropriate trigonometric identity.]1. 12 + e' sin 2t when money is used to purchase goods and services and circulates in our economy, it is acting as a(n): returns a pointer to an array that contains a null-terminated sequence of characters (i.e., a C-string) representing the current value of the string object.In C++98 it was required that "a program shall not alter any of the characters in this sequence". This was encouraged by returning a const char* .IN C++11, the "pointer returned points to the internal array currently used by the string object to store the characters that conform its value", and I believe the requirement not to modify its contents has been dropped. Is this true?Is this code OK in C++11? ensure that the facilities worksheet is active. use goal seek to reduce the monthly payment in cell b6 to the optimal value of $6000. complete this task by changing the loan amount in cell e6 consider two nonnegative numbers p and q such that p+q=6. what is the difference between the maximum and minimum of the quantity (p^2q^2)/2? According to Milton Friedman, the reason there are two Phillips curves is becausea. prices are inflexible.b. the expected inflation rate does not instantaneously adjust to changes in the actual inflation rate.c. the expected inflation rate is equal to 1 minus the actual inflation rate.d. the expected inflation rate adjusts to changes in the actual inflation rate. The transcendentalist movementA) urged Americans to play a more active role in government.B) endorsed the development of a fully industrialized economy.C) rejected what they saw as the artificial materalism of American sociey.D) opposed the spread of public education. calculate the cost of producing 10 tacos. round your answer to the nearest hundredths place. Composite materials How are continuous fibers typically oriented in fibrous composites? Select one: a. Randomly oriented. O b. Partially oriented. O c. Aligned. O d. All of the options given. an trust is created when a testator makes a bequest of specific property and the estate does not have the property at death. T/F? California Sports Rule, Inc spends $900 on routine maintenance of its equipment. Which financial statement would the debit for this transaction be apart of? Balance Sheet O No financial statement impact Income Statement Statement of RE what does holden say about him hating people, such as ackley and stradlater? A 30 kHz clock pulse is applied to a MOD 15 counter, What is the output frequency?A. 1.55 kHzB. 1.88 kHzC. 2.0 kHzD. 2.5 kHz Write balances molecular and net ionic equations for reactions of:A. Here is what they said the answer was for hydrochloric acid and nickel as a chemical equation2Hcl(aq)=Ni(s) arrowNiCl2(aq)+H2(g) NowWrite a net IONIC equation for hydrochloric acid and nickelExpress as a balanced new ionic equation - identify all phasesB. dilute sulfuric acid with ironExpress as a balanced chemical equation identify all phasesExpress as a balanced net ionic equation identify all phasesC. hydrobromic acid with magnesiumExpress as a balanced chemical equation identify all phasesExpress as a balanced net ionic equation edentify all phasesD. acetic acid, CH3COOH with zincExpress as a balanced chemical equation identify all phasesExpress as a balanced net ionic equation identify all phases why did the industrial revolution began in great britain although more recent research on observations of behavior suggests that women and men are equally agentic and assertive, research assessing attitudes finds that agentic and communal traits are the substitute teacher walked into the classroom and i immediately knew that i wouldnt like her because of the way she dressed. ___ Constructors in C++ cannot be overloaded, so it's important to use default parameters to allow for flexibility.1. True2.False