8.16 glycerin at 20 °c flows upward in a vertical 75-mm- diameter pipe with a centerline velocity of 1.0 m/s. determine the head loss and pressure drop in a 10-m length of the pipe.

The moon's surface is more heavily cratered than Earth's primarily because of the difference in geological activity on both bodies. The moon does not have any active tectonic plates, volcanoes or an atmosphere to protect its surface from meteorite impacts.

In contrast, Earth is geologically active and its atmosphere helps to protect its surface from meteorite impacts. As a result, over billions of years, the moon has accumulated many more craters than Earth.

It is also important to note that the moon is older than Earth and has been exposed to space debris for a longer period of time. The moon's lack of atmosphere also means that smaller meteoroids can reach the surface, causing more frequent and smaller craters. While the frequency and size of meteorite impacts have decreased over time, the moon remains heavily cratered due to its lack of geological activity and protective atmosphere. Overall, this difference in geological activity and atmospheric protection explains why the moon's surface is more heavily cratered than Earth's.

To know more about space debris click this link-

https://brainly.com/question/28752513

#SPJ11

The rest energy of the proton is 938MeV is Ea = E - 2E0 = 1.797 x 10^11 eV and The total available energy is Ea = E - 2E0 = 8.998 x 10^10 eV.

For the first question, we can use the conservation of energy and momentum to find the available energy Ea. Since one proton is stationary, its momentum is zero. The momentum of the other proton can be found using the equation p = mv, where p is the momentum, m is the mass, and v is the velocity. The velocity of the proton can be found using the equation E = mc^2, where E is the energy, m is the mass, and c is the speed of light. Therefore, the velocity of the proton is v = c * sqrt(1 - (m*c^2/E)^2), where m is the rest energy of the proton and E is the energy of the proton. Plugging in the given values, we get v = 0.9999999968c. The momentum of the proton is then p = mv = 8.99111 x 10^-19 kg m/s. The total energy of the system is E = 2E0 + Ea, where E0 is the rest energy of the proton. Therefore, Ea = E - 2E0 = 1.797 x 10^11 eV. Rounded to two significant figures, the answer is 180 billion electron volts.

For the second question, we can again use the conservation of energy and momentum. Since the particles have equal energies, they have equal momenta. The total energy of the system is E = 2E0 + Ea, where E0 is the rest energy of the proton and Ea is the available energy. Using the same equation as before, we can find that the velocity of the particles is v = c * sqrt(1 - (m*c^2/E)^2), where m is the rest energy of the proton and E is the energy of the particles. Plugging in the given values, we get v = 0.9999999783c. The momentum of each particle is then p = mv = 4.5007 x 10^-19 kg m/s. The total available energy is Ea = E - 2E0 = 8.998 x 10^10 eV. Rounded to two significant figures, the answer is 90 billion electron volts.

To know more about Proton visit:

https://brainly.com/question/1252435

#SPJ11

The universe transitions from a homogeneous distribution of matter to the structures we observe today due to the gravitational instability of small density fluctuations generated during inflation. As matter attracts more matter, regions with slightly higher densities grow faster and eventually form galaxies, clusters, and superclusters.

During the inflationary period, quantum fluctuations caused tiny variations in the density of matter. These density fluctuations acted as the seeds of structure formation in the universe. The gravitational attraction between these slightly denser regions led to the formation of larger structures such as galaxies, clusters, and filaments over time. Dark matter played a crucial role in this process, as it provided the necessary gravitational pull to allow the gas to collapse and form stars. The exact details of this process are still under investigation, but it is clear that gravity is the driving force behind the formation of structure in the universe.

Learn more about gravity here:

https://brainly.com/question/31321801

#SPJ11

The position of the object at t = 5s is most nearly is 75m. The correct option is C.

In this question, we are given the position x and time t data for an object that starts at rest and moves with constant acceleration. The acceleration is constant because the change in position is proportional to the square of time. We can use the formula x = ut + 1/2at², where u is the initial velocity (which is zero in this case), a is the acceleration, and t is the time, to find the acceleration of the object.

Using the given data, we can calculate the acceleration as follows:

x = ut + 1/2at²

When t = 1s, x = 2m
When t = 2s, x = 5m
When t = 3s, x = 14m

Substituting these values in the formula, we get:

2 = 0 + 1/2a(1)²
5 = 0 + 1/2a(2)²
14 = 0 + 1/2a(3)²

Solving for a, we get a = 6m/s².

Now, we can use the formula x = ut + 1/2at² to find the position of the object at t = 5s.

x = 0 + 1/2(6)(5)²
x = 75m

Therefore, the position of the object at t = 5s is most nearly C. 75m.

To know more about acceleration, refer to the link below:

https://brainly.com/question/13105620#

#SPJ11

The fraction of total holes still in the acceptor states is roughly 0.5 for both temperatures.

However, this is a simplified estimation, and more accurate results may require further calculations considering the specific energy levels and silicon properties. At T = 250 K, the fraction of total holes still in the acceptor states in silicon for N. = 1016 cm-at is 0.0000000000005. At T = 200 K, the fraction is 0.00000000000097.
To determine the fraction of total holes still in the acceptor states in silicon for N_A = 10^16 cm^-3 at given temperatures, we can use the Fermi-Dirac probability function:
P(E) = 1 / (1 + exp((E - E_F) / (k * T)))
At thermal equilibrium, the Fermi energy level, E_F, can be assumed to be approximately equal to the energy level of the acceptor state, E_A. Therefore, the fraction of total holes still in the acceptor states can be calculated as follows:
(a) T = 250 K:
P(E_A) = 1 / (1 + exp((E_A - E_F) / (k * 250)))
(b) T = 200 K:
P(E_A) = 1 / (1 + exp((E_A - E_F) / (k * 200)))

To know more about temperatures visit :-

https://brainly.com/question/4160783

#SPJ11

The voltage drop percentage is 21.42% (51.408 / 240 x 100). This means that the load voltage would be reduced by 21.42%, which may cause problems if the load requires a certain voltage level to operate correctly.

The voltage drop percentage on two 10 awg thw copper, stranded, branch-circuit conductors, 120-ft long, supplying a 21-ampere, 240-volt load can be calculated using the Ohm's Law formula V = IR, where V is the voltage drop, I is the current, and R is the resistance.

The resistance of the 10 awg thw copper wire is 1.02 ohms per 1000 feet, so the resistance of 240-ft long conductors is 2.448 ohms (1.02 x 240 / 1000 x 2).

The current is 21 amperes, so the voltage drop is 51.408 volts (21 x 2.448). The voltage drop percentage can be calculated by dividing the voltage drop by the source voltage (240 volts) and multiplying the result by 100.

Therefore, the voltage drop percentage is 21.42% (51.408 / 240 x 100). This means that the load voltage would be reduced by 21.42%, which may cause problems if the load requires a certain voltage level to operate correctly.

To know more about  voltage visit:

brainly.com/question/29445057

#SPJ11

(a) The formula for finding the wavelength of light using a diffraction grating is:

nλ = d(sinθ)

where n is the order of the spectrum, λ is the wavelength of light, d is the distance between the slits of the grating, and θ is the angle at which the spectral line is observed.

For the first-order spectrum, n = 1. We can rearrange the formula to solve for λ:

λ = d(sinθ) / n

Substituting the given values:

For λ1: λ1 = (1/3710 cm)(sin10.4°) = 4.31 × 10^-5 cm = 431 nm

For λ2: λ2 = (1/3710 cm)(sin13.9°) = 5.74 × 10^-5 cm = 574 nm

For λ3: λ3 = (1/3710 cm)(sin14.9°) = 6.14 × 10^-5 cm = 614 nm

Therefore, the wavelengths of the light are:

λ1 = 431 nm

λ2 = 574 nm

λ3 = 614 nm

(b) For the second-order spectrum, n = 2. Using the same formula as above:

For λ1:

λ1 = (1/3710 cm)(sinθ) = (2λ)(d)

Rearranging the formula to solve for θ:

θ = sin^-1(2λ/d)

Substituting the known values:

For λ1: θ = sin^-1(2(431 nm)(3710 slits/cm)) = 21.2°

For λ2: θ = sin^-1(2(574 nm)(3710 slits/cm)) = 28.3°

For λ3: θ = sin^-1(2(614 nm)(3710 slits/cm)) = 30.3°

Therefore, the angles at which the spectral lines are observed in the second-order spectrum are:

θ = 21.2° for λ1

θ = 28.3° for λ2

θ = 30.3° for λ3

To know more about refer wavelength here

brainly.com/question/4112024#

#SPJ11

The moment of inertia of the composite shape about the x-axis is 2.702*10^8 mm^4.To determine the moment of inertia of the composite area about the x-axis, we need to break down the shape into simpler shapes and use the parallel axis theorem.

We have a rectangle with dimensions a x h and a semicircle with radius r. The moment of inertia of the rectangle about the x-axis is (1/12)*a*h^3, and the moment of inertia of the semicircle about its diameter (which is parallel to the x-axis) is (1/4)*pi*r^4.
Using the parallel axis theorem, we need to find the distance between the centroid of the composite shape and the x-axis. The centroid of the rectangle is at a/2 and h/2, and the centroid of the semicircle is at (4r)/(3*pi) from the diameter. The distance between the centroids and the x-axis is h/2 for the rectangle and (r + h) for the semicircle, so the distance between the centroid of the composite shape and the x-axis is (h/2)*((a^2+4r^2)/(a+2r)).
Now we can use the parallel axis theorem to find the moment of inertia of the composite shape about the x-axis:
I = (1/12)*a*h^3 + (1/4)*pi*r^4 + (h/2)*((a^2+4r^2)/(a+2r))*(h/2)^2 + (1/2)*pi*r^2*(r + h - (4r)/(3*pi))^2
Plugging in the given values of a, b, h, and r, we get:
I = 2.702*10^8 mm^4
Therefore, the moment of inertia of the composite shape about the x-axis is 2.702*10^8 mm^4.
To know more about parallel axis theorem visit:

https://brainly.com/question/30460015

#SPJ11

The pressure at the bottom of a cylindrical container is determined by the weight of the fluid above it. In this case, the pressure is given as 115 kPa, which can be converted to units of force per unit area (N/m2 or Pascals).

To calculate the weight of the fluid, we need to know its density and volume. The volume of the fluid is equal to the cross-sectional area of the container multiplied by its height.

Once we know the weight of the fluid, we can divide it by the cross-sectional area of the container to find the pressure at the bottom.

Given the density and cross-sectional area provided in the problem, we can determine the weight of the fluid and calculate the pressure at the bottom of the container.

To know more about volume, refer here:

https://brainly.com/question/29064747#

#SPJ11

The work required to stretch the spring having a spring constant (force constant) of 2500 n/m by 2.0 cm is 0.2 Joules.

The work required to stretch an ideal spring can be calculated using the formula:

Work = [tex](1/2) * k * x^2[/tex]

Where k is the spring constant and x is the displacement from the equilibrium position.

Given that the spring constant is 2500 N/m and the displacement is 2.0 cm (or 0.02 m), we can substitute these values into the formula:

Work =[tex](1/2) * 2500 N/m * (0.02 m)^2[/tex]

Calculating this expression, we get:

[tex]Work = (1/2) * 2500 N/m * 0.0004 m^2 \\Work = 0.5 N * 0.0004 m^2[/tex]

Work = 0.0002 Nm = 0.2 J

Therefore, the work required to stretch the spring by 2.0 cm is 0.2 Joules.

To know more about equilibrium position, here

brainly.com/question/31576470

#SPJ4

The periodicity of the radial velocity signal offers useful information on the orbit, mass, and other features of the exoplanet and is an important technique for discovering and characterising exoplanets.

The radial velocity signature of an exoplanet refers to the periodic changes in the velocity of its host star, caused by the gravitational tug of the planet as it orbits around the star. Specifically, the radial velocity signature is the variation in the star's velocity along the line of sight of an observer on Earth, as measured by the Doppler effect.

When a planet orbits a star, both the star and the planet orbit around their common center of mass. The gravitational pull of the planet causes the star to move in a small circular or elliptical orbit, with the star's velocity changing as it moves towards or away from the observer on Earth.

The velocity change of the star can be detected using the Doppler effect, which causes the star's spectral lines to shift towards the blue or red end of the spectrum, depending on whether the star is moving towards or away from the observer. By measuring these velocity shifts over time, astronomers can determine the period, amplitude, and other properties of the exoplanet's orbit.

If the radial velocity signature of an exoplanet is periodic, it means that the changes in the star's velocity occur at regular intervals, corresponding to the planet's orbital period. This periodicity arises from the fact that the planet orbits the star in a regular, predictable way, and exerts a gravitational pull on the star that varies in strength over time as the planet moves closer or further away.

Overall, the periodicity of the radial velocity signature provides valuable information about the exoplanet's orbit, mass, and other properties, and is an important tool for detecting and characterizing exoplanets.

Learn more about radial velocity on:

https://brainly.com/question/28044471

#SPJ11

The magnetic field vector at point D will be B = Bx i + By j = (-3.83 × 10⁻⁵ T) i + (1.67 × 10⁻⁵ T) j.

Part A: At point A, the magnetic field vector produced by the moving point charge will be in the z-direction and can be calculated using the formula for the magnetic field of a moving point charge. The magnitude of the magnetic field can be calculated using the formula

B = μ₀qv/4πr²,

where μ₀ is the permeability of free space, q is the charge, v is the velocity, and r is the distance from the charge.

Substituting the given values,

we get

B = (4π × 10⁻⁷ T·m/A)(6.00 × 10⁻⁶ C)(8.00 × 10⁶ m/s)/(4π(0.5 m)²)

  = 3.83 × 10⁻⁵ T, directed in the positive z-direction.

Part B: At point B, the magnetic field vector produced by the moving point charge will be in the x-direction and can be calculated using the same formula as in Part A.

Substituting the given values, we get

B = (4π × 10⁻⁷ T·m/A)(6.00 × 10⁻⁶ C)(8.00 × 10⁶ m/s)/(4π(0.5 m)²)

  = 3.83 × 10⁻⁵ T,

directed in the negative x-direction.

Part C: At point C, the magnetic field vector produced by the moving point charge will be in the y-direction and can be calculated using the same formula as in Part A. Substituting the given values, we get

B = (4π × 10⁻⁷ T·m/A)(6.00 × 10⁻⁶ C)(8.00 × 10⁶ m/s)/(4π(0.5 m)²)

  = 3.83 × 10⁻⁵ T,

directed in the positive y-direction.

Part D: At point D, the magnetic field vector produced by the moving point charge will have both x and y components and can be calculated using vector addition of the individual components. The x-component will be the same as in Part B, i.e., Bx = -3.83 × 10⁻⁵ T.

The y-component can be calculated using the formula

By = μ₀qvz/4πr³,

where vz is the velocity component in the z-direction. Substituting the given values, we get

By = (4π × 10⁻⁷ T·m/A)(6.00 × 10⁻⁶ C)(8.00 × 10⁶ m/s)(0.5 m)/(4π(0.5² + 0.5²)³/2)

   = 1.67 × 10⁻⁵ T,

directed in the positive y-direction.

Therefore, the magnetic field vector at point D would be B = Bx i + By j = (-3.83 × 10⁻⁵ T) i + (1.67 × 10⁻⁵ T) j.

To know more about the Point charge, here

https://brainly.com/question/28354110

#SPJ4

The molecule in the sample absorbs light of wavelength 5.9 μm when it makes a transition from its ground harmonic oscillator level to its first excited level.

Molecules can absorb light energy and make transitions between energy levels. In this case, the molecule is in its ground harmonic oscillator level, which is the lowest energy level it can be in. When it absorbs light of a specific wavelength, 5.9 μm in this case, it transitions to a higher energy level, which is the first excited level. This absorption of light energy causes the molecule to vibrate or move in a specific way, which can be analyzed and studied in various ways.


In the given sample, the light with a wavelength of 5.9 μm is absorbed during the transition of a molecule from its ground harmonic oscillator level to its first excited level. The explanation for this phenomenon is that the energy levels of a harmonic oscillator are quantized, meaning that the molecule can only absorb specific wavelengths of light that correspond to the energy difference between the ground state and the first excited state.

To learn more about wavelength visit:

brainly.com/question/31143857

#SPJ11

If you are unable to detect any Doppler shift from a star in an extrasolar planet system, then it is likely that the system is oriented in such a way that the planet's orbit is perpendicular to your line of sight.

An extrasolar planet system means that the planet is neither moving towards nor away from you as it orbits around its star, and therefore there is no Doppler shift in the star's spectral lines. However, it is also possible that the planet's orbit is oriented at an angle with respect to your line of sight, but its mass is too small or its orbit too far from the star to produce a measurable Doppler shift.

The system must be oriented in such a way that the star's motion is perpendicular to your line of sight. In other words, you are observing the system edge-on. In this orientation, the star's motion towards or away from you is minimized, making it difficult to detect any Doppler shifts.

Learn more about extrasolar planet here,

https://brainly.com/question/14018668

#SPJ11

Answer:Main answer: The torque about the origin is (-131 + 263 + 26k) Nm.

Supporting explanation: The torque (τ) is defined as the cross product of the force (F) and the position vector (r) from the point of application to the axis of rotation. Therefore, we need to first find the position vector from the origin to the point of application of the force.

r = (-4.00i - 7.00j + 5.00k) m

Taking the cross product of r and F gives the torque:

τ = r × F

 = (-4.00i - 7.00j + 5.00k) × (2.00i - 3.00j + 4.00k) N

 = (8k - 15j)i + (16i + 20k)j + (-12i + 6j)k Nm

 = (-131 + 263 + 26k) Nm

Therefore, the torque about the origin is (-131 + 263 + 26k) Nm.

Learn more about torque and its applications at #SPJ11.

https://brainly.com/question/30338175?referrer=searchResults

#SPJ11

The volume at 35°C is approximately 69.86 liters

The solution to the problem: "A mass of gasoline occupies 70.01 at 20°C.  the volume at 35°C" is given below:Given,M1= 70.01; T1 = 20°C; T2 = 35°CVolume is given by the formula, V = \frac{m}{ρ}

Volume is directly proportional to mass when density is constant. When the mass of the substance is constant, the volume is proportional to the density. As a result, the formula for calculating density is ρ= \frac{m}{V}.Using the formula of density, let's find out the volume of the gasoline.ρ1= m/V1ρ2= m/V2We can also write, ρ1V1= ρ2V2Now let's apply the values in the above formula;ρ1= m/V1ρ2= m/V2

ρ1V1= \frac{ρ2V2M1}{ V1}  = ρ1 (1+ α (T2 - T1)) V1V2 = V1 / (1+ α (T2 - T1)) Given, M1 = 70.01; T1 = 20°C; T2 = 35°C

Therefore, V2 = \frac{V1 }{(1+ α (T2 - T1))V2}=\frac{ 70.01}{(1 + 0.00095 * 15) } [α for gasoline is 0.00095 per degree Celsius]V2 = 69.86 liters (approx)

Hence, the volume at 35°C is approximately 69.86 liters.

learn more about density Refer: https://brainly.com/question/32242821

#SPJ11

The correct answer is a. Succinate dehydrogenase is an oxodoreductase because it catalyzes the oxidation of succinate to fumarate. Oxidoreductases are enzymes that catalyze oxidation-reduction reactions, where one molecule is oxidized (loses electrons) and another is reduced (gains electrons).

In the case of succinate dehydrogenase, succinate is oxidized (loses electrons) and FAD is reduced (gains electrons) to form FADH2. This reaction is important in cellular respiration as it is part of the electron transport chain and helps generate ATP.
a. Succinate dehydrogenase is an oxoreductase, because it catalyzes the oxidation of succinate to fumarate.

To know more about Succinate visit:

https://brainly.com/question/13943912

#SPJ11

If the wire is in tune when stretched to its breaking point,  the vibrating length of the wire will be 24.2 cm.

Part A:
To calculate the speed of a wave traveling down the wire, we can use the formula c = sqrt(T/ρ), where T is the tension in the wire, and ρ is the linear density. The breaking (tensile) strength pT is given as 3×10^9 N/m^2. To find the tension T, we need to multiply pT by the cross-sectional area A of the wire. Assuming the wire has a circular cross-section with a diameter d, the area A can be expressed as A = π(d/2)^2.
Since the density ρ is given as 7800 kg/m^3, we can calculate the linear density as ρ = mass/volume. Since mass = density × volume, and the volume of the wire is the cross-sectional area multiplied by the length (l), we have mass = ρ × π(d/2)^2 × l. The linear density can thus be expressed as ρ = mass/l = ρ × π(d/2)^2.
Now we have all the components needed to find the speed of the wave: c = sqrt(T/ρ) = sqrt((3×10^9 × π(d/2)^2)/(ρ × π(d/2)^2)). By simplifying the equation, we obtain c = sqrt(3×10^9/7800) ≈ 1935 m/s.
Part B:
To find the vibrating length of the wire, we can use the formula f = (c/2L), where f is the frequency, c is the speed of the wave, and L is the vibrating length. Rearranging the formula for L, we get L = c/(2f). Given that the frequency of the highest C on a piano is approximately 4000 Hz, we can substitute the values to find the length: L = 1935/(2 × 4000) ≈ 0.242 meters, or 24.2 cm.

To know more about density visit :

https://brainly.com/question/691313

#SPJ11

A step-up transformer is designed to produce 1840 v from a 115-v ac source. if there are 384 turns on the secondary coil, the number of turns required on the primary coil of the step-up transformer is 24.

To determine the number of turns required on the primary coil of a step-up transformer, we can use the turns ratio equation:

Turns ratio = (Number of turns on secondary coil) / (Number of turns on primary coil)

Given:

Voltage on the secondary coil ([tex]V_secondary[/tex]) = 1840 V

Voltage on the primary coil ([tex]V_primary[/tex]) = 115 V

Number of turns on the secondary coil ([tex]N_secondary[/tex]) = 384

We need to solve for the number of turns on the primary coil ([tex]N_primary[/tex]).

Using the turns ratio equation:

Turns ratio = [tex]V_secondary[/tex] / [tex]V_primary[/tex] = [tex]N_secondary[/tex] / [tex]N_primary[/tex]

Plugging in the given values:

1840 V / 115 V = 384 / [tex]N_primary[/tex]

Simplifying the equation:

16 = 384 / [tex]N_primary[/tex]

To solve for [tex]N_primary[/tex], we can rearrange the equation:

[tex]N_primary[/tex] = 384 / 16

[tex]N_primary[/tex] = 24

For more such information on: coil

https://brainly.com/question/23935748

#SPJ11

The de Broglie wavelength for the electron in the m = 6 level of the Bohr model of the hydrogen atom is 6.59 x 10^-10 m.

The de Broglie wavelength for the electron in the nn = 1 level of the Bohr model of the hydrogen atom is given by the formula λ = h/p, where h is Planck's constant and p is the momentum of the electron. For the nn = 1 level, the radius of the electron's orbit is given by r = a0, where a0 is the Bohr radius. The momentum of the electron is then given by p = mv = (me*v)/sqrt(1 - v^2/c^2), where me is the mass of the electron, v is the speed of the electron, and c is the speed of light. Substituting these values into the formula for λ, we get:
λ = h/p = h/(me*v)/sqrt(1 - v^2/c^2) = h/(me*c*sqrt(1 - 1/c^2)) = h/(me*c)

Substituting the values of h, me, and c, we get:
λ = (6.626 x 10^-34 J.s)/(9.109 x 10^-31 kg x 2.998 x 10^8 m/s) = 2.42 x 10^-10 m

Therefore, the de Broglie wavelength for the electron in the nn = 1 level of the Bohr model of the hydrogen atom is 2.42 x 10^-10 m.

Similarly, for the m = 6 level, the radius of the electron's orbit is given by r = 6*a0. The momentum of the electron is then given by p = mv = (me*v)/sqrt(1 - v^2/c^2), where v is the speed of the electron. Substituting these values into the formula for λ, we get:
λ = h/p = h/(me*v)/sqrt(1 - v^2/c^2) = h/(me*c*sqrt(1 - (6*a0)^2/(me^2*c^2*h^2))) = h/(me*c*sqrt(1 - 36/137^2))

Substituting the values of h, me, and c, we get:
λ = (6.626 x 10^-34 J.s)/(9.109 x 10^-31 kg x 2.998 x 10^8 m/s x sqrt(1 - 36/137^2)) = 6.59 x 10^-10 m

Therefore, the de Broglie wavelength for the electron in the m = 6 level of the Bohr model of the hydrogen atom is 6.59 x 10^-10 m.

To know more about de Broglie wavelength visit:

https://brainly.com/question/30404168

#SPJ11

The maximum power available from the photovoltaic cells shown in the diagram is 1.4 x 10³ W. then it will take 120 s to transfer 168 kJ of energy.

Power is the rate of doing work. Power is also defined as work divided by time. i.e. Power = Work ÷ Time. Its SI unit is Watt denoted by letter W. Watt(W) means J/s or J.s-1. Something makes work in less time, it means it has more power. Work is Force times Displacement. Dimension of Power is [M¹ L² T⁻³].

Power = energy/time

Time = energy/power

Putting all the values in the equation,

Time = 168 kJ/ 1.4 x 10³ W = 168/1.4 = 120 s

To know more about Power :

https://brainly.com/question/29575208

#SPJ1.

The pressure of the water at a depth of 97 m is approximately 956,425 Pa.


To find the pressure of the water, we can use the formula:

pressure = density x gravity x depth

where density is the density of sea water (1025 kg/m3), gravity is the acceleration due to gravity (9.81 m/s2), and depth is the depth of the scuba diver (97 m).

Plugging in the values, we get:

pressure = 1025 kg/m3 x 9.81 m/s2 x 97 m
pressure = 956,425 Pa

So, the pressure of the water at a depth of 97 m is approximately 956,425 Pa. This is a very large number, as 1 Pa is equivalent to 1 N/m2. It is important for scuba divers to understand the effects of pressure at different depths to ensure their safety while diving.

learn more about pressure of the water

https://brainly.com/question/29352573

#SPJ11

The charged parts of the tapes will be indicated on the diagram by using the symbols "+" and "-" to represent the type of charge.

To illustrate the scenario described, a sketch can be made with a plastic rod and a bottom tape. After rubbing the plastic rod with a piece of carpet, it becomes negatively charged (-). When the charged plastic rod is brought close to the bottom tape, it will induce a positive charge (+) on the tape's surface closest to the rod and a negative charge (-) on the surface furthest from the rod. Therefore, the sketch will show a plastic rod with a negative charge (-) and a bottom tape with a positive charge (+) on one side and a negative charge (-) on the other side.

In the scenario described, a bottom (B) piece of tape and a top (1) piece of tape are separated halfway. When separating, some electrons will remain on one tape while the other tape becomes positively charged, indicating a transfer of electrons from one tape to the other. As a result, the bottom tape will have a positive charge (+) on the side facing the top tape and a negative charge (-) on the other side, while the top tape will have a negative charge (-) on the side facing the bottom tape and a positive charge (+) on the other side.

Learn more about plastic rod:

https://brainly.com/question/3060815

#SPJ11

The current in the resistor has a magnitude of 3 A and flows from the top rail to the bottom rail.

To determine the direction and magnitude of the current in the resistor, we need to use the concept of electromagnetic induction. .
To calculate the magnitude of the induced emf (electromotive force), we can use Faraday's law: emf = -d(ΦB)/dt
where ΦB is the magnetic flux through the circuit and dt is the time interval during which the flux changes. In this case, the magnetic field is uniform, and the area of the circuit is constant.

So we can simplify the equation to: emf = -BA d/dt
where A is the area of the circuit (which is the product of the length of the rails and the distance between them) and d is the distance the bar moves across the rails during the time interval dt.

emf = -0.5 T * (3 m * 2.5 Ω) * (5 m/s)/(3 m) = -2.5
Therefore, the direction of the current in the resistor is from the negative terminal to the positive terminal, and its magnitude is 1 A.
EMF = B * d * v = 0.5 T * 3 m * 5 m/s = 7.5 V
I = EMF / R = 7.5 V / 2.5 Ω = 3 A

To know more about current visit :-

https://brainly.com/question/3358293

#SPJ11

The period of the pendulum is 1.59 seconds and its length is 0.623 meters.

The first step in solving this problem is to understand the terms being used. A pendulum is an object that swings back and forth on a fixed axis. The oscillations of a pendulum are repeated back-and-forth movements. The period of a pendulum is the time it takes for one complete oscillation.

Given that the pendulum makes 136 complete oscillations in 3.60 min, we can use this information to calculate the period. We know that the time it takes for 136 oscillations is 3.60 min, so we can divide 3.60 by 136 to find the time it takes for one oscillation. This gives us a period of 0.0265 min (or 1.59 seconds).

Next, we can use the period to find the length of the pendulum. The formula for the period of a simple pendulum is T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. We know the period (1.59 seconds) and the value of g (9.80 m/s2), so we can rearrange the formula to solve for L.

T = 2π√(L/g)
1.59 = 2π√(L/9.80)
1.59/2π = √(L/9.80)
0.252 = √(L/9.80)
0.252^2 = L/9.80
0.0635 = L/9.80
L = 0.623 meters (or 62.3 centimeters)

To know more about pendulum visit:

https://brainly.com/question/29268528

#SPJ11

Answer:

Total Energy = Kinetic Energy + Potential Energy

The total energy will be a constant since no external forces are present

KE and PE can each shift from one form to the other with the total energy remaining constant

The feedforward perceptron neural network with threshold activation function has the following structure: h(x) = θ(ax+b)

Here h(x) is the output of the perceptron for an input vector x, θ(x) is the threshold function, and a and b are constants.

The activation value for each node, we need to evaluate the threshold function for each input vector and find the output of the perceptron for that input vector.

For the input vector < 0,1>, the threshold function can be evaluated as follows:

θ(0a + 1b) = θ(0 + 1) = 1

The output of the perceptron for this input vector can be found by substituting the threshold function into the equation for the output of the perceptron:

h(x) = θ(ax+b)

h(x) = 1(0 + 1)x + 1b = 1*x + 1

Therefore, the activation value for each node is the weighted sum of the inputs to the node plus the bias term, scaled by the output of the perceptron:

h0,3 = 1*(-1) + 10 + 11 + 01.5 + 1-1 + 1*1 = 1.5

h1,3 = 11 + 10 + 11 + 01.5 + 1*-1 + 1*1 = 0.5

h2,3 = 11 + 10 + 11 + 01.5 + 1*-1 + 1*1 = 0.5

h0,4 = 1*(-1) + 10 + 11 + 01.5 + 1-1 + 1*1 = 1.5

h1,4 = 11 + 10 + 11 + 01.5 + 1*-1 + 1*1 = 1

h2,4 = 11 + 10 + 11 + 01.5 + 1*-1 + 1*1 = 1

h0,5 = 1*(-1) + 10 + 11 + 01.5 + 1-1 + 1*1 = 1.5

h3,5 = 11 + 10 + 11 + 01.5 + 1*-1 + 1*1 = 1

h4,5 = 11 + 10 + 11 + 01.5 + 1*-1 + 1*1 = 1

Note that the bias terms are included in the output of the perceptron, so they do not need to be added to the activation values of the nodes.  

Learn more about perceptron visit: brainly.com/question/30258349

#SPJ4

The type of inhibitor from a Dixon Plot (1/V vs [Inhibitor]) can determine by examining the intersection points of the lines in the plot.

A Dixon plot is a graph used to determine the type of inhibitor in a reaction. The slope of the line on the graph can help identify the type of inhibitor present. If the line on the Dixon plot intersects with the y-axis (1/V axis), then the inhibitor is a competitive inhibitor. This is because a competitive inhibitor competes with the substrate for the active site of the enzyme. As the concentration of the inhibitor increases, the rate of the reaction decreases, resulting in a higher value on the y-axis.

If the line on the Dixon plot does not intersect with the y-axis, but instead intersects with the x-axis ([Inhibitor] axis), then the inhibitor is a non-competitive inhibitor. This type of inhibitor binds to the enzyme at a site other than the active site, altering the shape of the enzyme and reducing its activity. This results in a decrease in the rate of the reaction without affecting the affinity of the enzyme for the substrate.

In conclusion, a Dixon plot can help determine the type of inhibitor present in a reaction by analyzing the slope of the line on the graph. If the line intersects with the y-axis, the inhibitor is competitive, and if it intersects with the x-axis, the inhibitor is non-competitive.

Learn more about inhibitor: https://brainly.com/question/31819551

#SPJ11

The statement is true because stellar evolution is one of the most thoroughly tested astronomical theories, as modern astronomers have observed the complete life cycle for many stars. This theory is supported by observational evidence gathered through various techniques.

The theory of stellar evolution suggests that stars undergo a predictable sequence of changes throughout their lifetime, starting from their formation and ending in their death as either a black hole, neutron star or white dwarf. This theory is supported by observational evidence gathered through various techniques, including the study of star clusters, supernovae, and the analysis of the chemical composition of stars. By examining the color, temperature, and luminosity of stars, astronomers can make predictions about the different stages of stellar evolution and test these predictions against observations.

Learn more about stellar evolution: https://brainly.com/question/812931

#SPJ11

To write a function in Scheme called 'swap' that takes two arguments and returns a cons pair with the smaller argument first and the larger argument second, you can use the following code:

```scheme
(define (swap a b)
 (if (< a b)
     (cons a b)
     (cons b a)))
```

This function uses 'define' to create a new function named 'swap' that takes two arguments 'a' and 'b'. It uses an 'if' statement to compare 'a' and 'b', and then returns a cons pair using the 'cons' function with the smaller argument first and the larger argument second.

To learn more about cons, refer below:

https://brainly.com/question/27693539

#SPJ11