Answer:
Range formula:
R = V^2 sin 2θ / g
sin 2θ = R g / V^2 = 80 m * 9.80 m/s^2 / (30 m/s)^2 = .871
2θ = 60.6 deg
θ = 30.3 deg
Check: 30 * cos 30.3 = 25.9 m/s horizontal speed
t = 80 m / 25.9 m/s = 3.08 sec to reach target
H = Vy0 t - 1/2 g t^2
Vy0 = 30 * sin 30.3 = 15.1 m/s initial vertical speed
H = 15.1 * 3.08 - 4.9 * 3.08^2 = 46.5 - 46.5 = 0
Ball will be back at starting height after 3.08 s
A circuit consists of a 100 ohm resistor and a 150 nf capacitor wired in series and connected to a 6 v battery. what is the maximum charge the capacitor can store?
A circuit consists of a 100 ohm resistor and a 150 nf capacitor wired in series and connected to a 6 v battery. The maximum charge the capacitor can store is 900 microcoulombs.
To find the maximum charge stored in the capacitor, we need to use the formula Q=CV, where Q is the charge stored, C is the capacitance and V is the voltage across the capacitor.
Since the capacitor and resistor are wired in series, the voltage across the capacitor is the same as the battery voltage of 6 V. The capacitance is given as 150 nf (nano farads), which is equivalent to 0.15 microfarads (μF). Plugging in these values, we get Q=0.15μF x 6V = 0.9μC (microcoulombs). Therefore, the maximum charge the capacitor can store is 900 microcoulombs.
Learn more about capacitor here:
https://brainly.com/question/17176550
#SPJ11
Given the following circuit with va(t) = 60 cos (40,000t) V and vb(t) = 90 sin (40,000t + 180°) V. Calculate the current through the inductor, io(t). Report your answers in amps. Report your answers with no spaces or special characters. Also, ROUND to the nearest WHOLE number for all numbers. For example, vb(t) could be entered as 60cos(40000t+180) io(t) = ?
In the given circuit, we have two voltage sources, va(t) = 60 cos(40,000t) V and vb(t) = 90 sin(40,000t + 180°) V. To calculate the current through the inductor io(t), we need to find the equivalent voltage across the inductor.
First, we convert vb(t) to a cosine function to match the format of va(t): vb(t) = 90 cos(40,000t + 270°) V, as sin(x + 180°) = cos(x + 270°). Now, we have both voltage sources in the cosine form. Next, we find the equivalent voltage across the inductor by adding the two voltage sources: veq(t) = va(t) + vb(t) = 60 cos(40,000t) + 90 cos(40,000t + 270°) V. For an inductor, the relationship between voltage and current is given by v(t) = L * di(t)/dt, where L is the inductance and di(t)/dt is the time derivative of the current. To find io(t), we need to integrate the equivalent voltage function with respect to time. Assuming an ideal inductor, the integration will result in an equation in the form: io(t) = A * cos(40,000t) + B * sin(40,000t), where A and B are constants.
Learn more about inductance here :
https://brainly.com/question/30434803
#SPJ11
If Gestalt is, "The total is greater than the sum of its parts", then what is the word for "The total is less than the sum of its parts?" Thanks
The term that represents the concept of "The total is less than the sum of its parts" is called "reductive fallacy" or "reductionism."
While Gestalt psychology emphasizes that the whole is greater than the sum of its parts, there is an opposing viewpoint known as reductionism. Reductionism is a philosophical and scientific approach that suggests that complex systems or phenomena can be understood by reducing them to their individual components or basic principles. In this perspective, the total is considered to be less than the sum of its parts because it believes that the essence of the whole can be fully explained by analyzing its individual elements.
Reductionism can be observed in various fields, such as biology, where complex organisms are studied by examining their biological structures and processes at the molecular or cellular level. It is also prevalent in physics, where complex phenomena are explained by breaking them down into fundamental particles and forces.
The term "reductive fallacy" is sometimes used to describe the oversimplification or incomplete understanding that can result from reductionist thinking. It suggests that reducing a complex system or phenomenon to its individual parts may neglect the emergent properties or interactions that occur at higher levels of organization.
Learn more about Reductionism here:
https://brainly.com/question/30640793
#SPJ11
You stand 3.8 m in front of a plane mirror. Your little brother is 1.2 m in front of you, directly between you and the mirror. What is the distance from you to your brother's image?
Express your answer to two significant figures and include the appropriate units.
The distance from you to your brother's image is 6.4 meters.
To calculate the distance from you to your brother's image in the mirror, we first need to find the distance from your brother to the mirror and then double that distance, since the image in a plane mirror is always the same distance behind the mirror as the object is in front of it.
Your brother is 1.2 m in front of you, so he is 3.8 m - 1.2 m = 2.6 m in front of the mirror. Since the image is the same distance behind the mirror, the image is also 2.6 m away from the mirror.
Now, to find the distance from you to your brother's image, add the distance from you to the mirror (3.8 m) and the distance from the mirror to the image (2.6 m): 3.8 m + 2.6 m = 6.4 m.
Therefore, the distance from you to your brother's image is 6.4 meters.
To learn more about Optics, visit:
https://brainly.com/question/22664227
#SPJ11
as a 3.0-kg bucket is being lowered into a 10-m-deep well, starting from the top, the tension in the rope is 9.8 n. the acceleration of the bucket will be:
The acceleration is -6.53 m/s^2 and it is in a downward direction.
The acceleration of the bucket can be found using the equation F_net = ma, where F_net is the net force acting on the bucket, m is the mass of the bucket, and a is the acceleration of the bucket. In this case, the net force is the tension in the rope minus the weight of the bucket, which is given by F_net = T - mg, where T is the tension in the rope, g is the acceleration due to gravity (9.8 m/s^2), and m is the mass of the bucket.
Plugging in the given values, we get:
F_net = T - mg = 9.8 N - (3.0 kg)(9.8 m/s^2) = -19.6 N
The negative sign indicates that the net force is downward, which makes sense because the bucket is being lowered into the well. Using F_net = ma, we can solve for the acceleration:
a = F_net / m = (-19.6 N) / (3.0 kg) = -6.53 m/s^2
Again, the negative sign indicates that the acceleration is downward. This means that as the bucket is being lowered into the well, its speed is decreasing and its velocity is becoming more negative. The tension in the rope is necessary to balance the weight of the bucket and provide a net force downward, which results in a negative acceleration.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ11
which of the following statements is/are true? select one or more: a. constellations weren't used by civilizations until around 2,000 years ago. b. some constellations, like the big bear, crossed over between different cultures on different continents. c. constellations were used by civilizations over 10,000 years ago d. ancient civilizations accurately measured orbital periods of planets.
The statement that is true is in option b
b. Some constellations, like the Big Bear, crossed over between different cultures on different continents.
Why the statement is trueSome constellations, just like the Big Bear, crossed over between one-of-a-kind cultures on unique continents: This assertion is true.
Many cultures around the sector diagnosed and named the identical constellations, frequently with comparable myths or testimonies associated with them.
The Big Bear (additionally referred to as the Great Bear or Ursa Major) is one instance of a constellation this is diagnosed by means of many extraordinary cultures.
Learn more about constellations at
https://brainly.com/question/667281
#SPJ4
when a 3.0-f capacitor is connected to a generator whose rms output is 29 v, the current in the circuit is observed to be 0.40 a. what is the frequency of the source? hz
The frequency of the source is approximately 0.77 Hz.
To determine the frequency of the source, we can use the formula for capacitive reactance (Xc) and Ohm's law.
The formula for capacitive reactance is:
Xc = 1 / (2 * π * f * C)
Where Xc is the capacitive reactance, f is the frequency, and C is the capacitance.
Ohm's law states:
Vrms = Irms * Xc
Where Vrms is the root mean square voltage, and Irms is the root mean square current.
From the given information, we have:
C = 3.0 F
Vrms = 29 V
Irms = 0.40 A
We can rearrange Ohm's law to find Xc:
Xc = Vrms / Irms
Xc = 29 V / 0.40 A
Xc ≈ 72.5 Ω
Now we can use the capacitive reactance formula to find the frequency:
72.5 Ω = 1 / (2 * π * f * 3.0 F)
Rearranging the equation to solve for f:
f = 1 / (2 * π * 3.0 F * 72.5 Ω)
f ≈ 0.77 Hz
To know more about frequency visit :-
https://brainly.com/question/30783512
#SPJ11
light of wavelength 650 nmnm falls on a slit that is 3.60×10−3 mmmm wide. how far the first bright diffraction fringe is from the strong central maximum if the screen is 12.5 m away.
The first bright diffraction fringe is approximately 0.125 meters away from the strong central maximum.
When light of a certain wavelength passes through a slit, it creates a diffraction pattern on a screen positioned some distance away. The distance to the first bright diffraction fringe can be calculated using the formula for the angular position of the bright fringes in single-slit diffraction:
θ = sin^(-1)(mλ / a)
where θ is the angle formed by the central maximum and the first bright fringe, m is the order of the fringe (m = 1 for the first fringe), λ is the wavelength of the light (650 nm = 6.50×10^(-9) m), and a is the width of the slit (3.60×10^(-3) m).
θ = sin^(-1)((1)(6.50×10^(-9) m) / (3.60×10^(-3) m)) ≈ 0.01 radians
Now, we can use the small angle approximation to calculate the distance (y) between the central maximum and the first bright fringe:
y = L * tan(θ) ≈ L * θ
where L is the distance between the slit and the screen (12.5 m).
y = (12.5 m) * 0.01 ≈ 0.125 meters
Thus, the first bright diffraction fringe is approximately 0.125 meters away from the strong central maximum.
To know more about the diffraction pattern, click here;
https://brainly.com/question/27118261
#SPJ11
long term compressive strength of concrete using type iii portland cement is higher than with type i portland cement (general purpose). True or false ?
False. Type III Portland cement is a high-early-strength cement, which means it gains strength faster in the early stages of curing. However.
the long-term compressive strength of concrete using Type I Portland cement (general-purpose) is generally higher. Type I cement has a slower hydration rate, allowing for more complete and denser hydration of the cement particles over time, resulting in stronger concrete in the long run. So, Type I cement is preferred for applications where long-term strength and durability are critical, such as structural elements in buildings and bridges. Type III Portland cement is a high-early-strength cement, designed for rapid strength development in the early days of concrete curing. However, Type I Portland cement (general-purpose) generally results in higher long-term compressive strength. Type I cement has a slower hydration rate, allowing for more complete and denser hydration over time, leading to stronger and more durable concrete in the long run.
learn more about strength here:
https://brainly.com/question/28706416
#SPJ11
Impulse involves the time that a force acts, whereas work involves the Select one: O a. acceleration that a force produces. O b. distance that a force acts. O c. time and distance that a force acts. O d. distance and velocity that a force acts
The correct answer is b. distance that a force acts, as it accurately describes the concept of work. The other options (a, c, and d) are not accurate descriptions of the relationship between impulse and work.
Impulse is defined as the change in momentum of an object and is calculated by multiplying the force applied to an object by the time interval over which the force is applied. It is directly related to the time duration of the force acting on an object. On the other hand, work is defined as the product of the force applied to an object and the distance over which the force is applied. It is a measure of the energy transferred to or from an object by the force.
Based on this understanding, the correct answer is B. distance that a force acts. The incorrect answers and their reasons:
a. acceleration that a force produces: Acceleration is related to the change in velocity, not work or impulse.c. time and distance that a force acts: While time is relevant to impulse, work only considers the distance.d. distance and velocity that a force acts: Velocity is not directly related to work or impulse, but rather to the object's motion.Learn more about impulse: https://brainly.com/question/30395939
#SPJ11
A boy on a 2. 0 kg skateboard initially at rest tosses an 8. 0 kg jug of water in the forward direction. If the jug has a speed of 3. 0 m/s relative to the ground and the boy and skateboard move in the opposite direction at 0. 60 m/s, find the boy’s mass
The boy's mass can be determined by applying the law of conservation of momentum. The mass of the skateboard is given as 2.0 kg, and the jug of water has a mass of 8.0 kg.
The jug is thrown forward with a speed of 3.0 m/s relative to the ground, while the boy and skateboard move in the opposite direction at 0.60 m/s. To find the boy's mass, we can use the equation:
[tex]\[(m_{\text{{boy}}} + m_{\text{{skateboard}}}) \cdot v_{\text{{boy}}} = m_{\text{{jug}}} \cdot v_{\text{{jug}}}\][/tex]
where [tex]\(m_{\text{{boy}}}\)[/tex] is the boy's mass, [tex]\(m_{\text{{skateboard}}}\)[/tex] is the skateboard's mass, [tex]\(v_{\text{{boy}}}\)[/tex] is the boy's velocity, [tex]\(m_{\text{{jug}}}\)[/tex] is the jug's mass, and [tex]\(v_{\text{{jug}}}\)[/tex] is the jug's velocity.
Rearranging the equation to solve for [tex]\(m_{\text{{boy}}}\)[/tex], we have:
[tex]\[m_{\text{{boy}}} = \frac{{m_{\text{{jug}}} \cdot v_{\text{{jug}}}}}{{v_{\text{{boy}}}}} - m_{\text{{skateboard}}}\][/tex]
Substituting the given values, we get:
[tex]\[m_{\text{{boy}}} = \frac{{8.0 \, \text{{kg}} \cdot 3.0 \, \text{{m/s}}}}{{0.60 \, \text{{m/s}}}} - 2.0 \, \text{{kg}}\][/tex]
Simplifying the equation, we find:
[tex]\[m_{\text{{boy}}} = 38 \, \text{{kg}}\][/tex]
Therefore, the boy's mass is 38 kg.
To learn more about momentum refer:
https://brainly.com/question/1042017
#SPJ11
In which of the following situations would a person lose heat by conduction?a. Sitting on cold metal bleachers at a football gameb. Wearing wet clothing in windy weatherc. Breathingd. Going outside without a coat during a cold but calm day
The situation in which a person would lose heat by conduction is a. Sitting on cold metal bleachers at a football game. Conduction occurs when heat is transferred through direct contact with a cooler object, in this case, the cold metal bleachers.
In situation a, sitting on cold metal bleachers at a football game, a person would lose heat by conduction. Conduction is the transfer of heat through direct contact between objects, so sitting on a cold metal surface would transfer heat from the body to the bleachers. In situation b, wearing wet clothing in windy weather, a person would lose heat by both conduction and convection. Convection is the transfer of heat through movement of air or fluid, so the wind would increase the rate of heat loss. In situation c, breathing, heat loss would occur through respiration, which is a form of evaporation. In situation d, going outside without a coat during a cold but calm day, a person would lose heat primarily through radiation and convection, but not as much through conduction.
Learn more about conduction here:-
https://brainly.com/question/31201773
#SPJ11
Seymor Crest is watching the waves go by his boat. He sees 24 waves go by in 6 seconds. What is the frequency of the waves?
a) 144 Hz
b) 4 Hz
c) 24 Hz
d) 6 Hz
As per the given variables, the frequency of the waves is b) 4 Hz
Total number of waves seen = 24
Total time = 6 seconds
Frequency is the rate at which something happens over a period of time or in a given sample. For the given question, wave frequency is the number of waves passing in one second. The SI unit of frequency is Hz. Further, frequency is the number of waves divided by time.
Calculating frequency -
Frequency = Number of waves / Time
Substituting the values -
= 24 waves / 6 seconds
= 4
Read more about frequency on:
https://brainly.com/question/30466268
#SPJ1
a particular light photon carries an energy of 3 x 10-19 j. what are the frequency, wavelength, and color of this light?
The frequency, wavelength, and color of the light photon with an energy of [tex]3 * 10^{-19}[/tex] J are approximately [tex]4.53 * 10^{14}[/tex] Hz, 662 nm, and red, respectively.
1. Calculate the frequency (f) using the formula E = hf, where E is the energy, h is Planck's constant ([tex]6.63 * 10^{-34}[/tex]) Js, and f is the frequency.
f = E/h
= [tex](3 * 10^{-19} J) / (6.63 * 10^{-34} Js) ≈ 4.53 *10^{14} Hz[/tex]
2. Calculate the wavelength (λ) using the speed of light (c) formula, c = fλ, where c is 3 x 10^8 m/s.
λ = c/f = [tex](3 *10^{8} m/s) / (4.53 * 10^{14} Hz) ≈ 6.62 *10^{-7}[/tex] m or 662 nm
3. Determine the color of the light based on the wavelength. A wavelength of 662 nm corresponds to the red color in the visible light spectrum.
The light photon with an energy of [tex]3 * 10^{-19}[/tex] J has a frequency of [tex]4.53 * 10^{14}[/tex] Hz, a wavelength of 662 nm, and is red in color.
For more information on wavelength kindly visit to
https://brainly.com/question/29689767
#SPJ11
Find the peak magnetic field in an electromagnetic wave whose peak electric field is Emax. (B) Find the peak electric field in an electromagnetic wave whose peak magnetic field is B max: Emax = 260 V/m; B max = 45 nT; ] = = 8.667e-6 T Submit Answer Incorrect. Tries 1/12 Previous Tries Submit Answer Tries 0/12
The peak electric field in this electromagnetic wave is 13.5 V/m.
To find the peak magnetic field in an electromagnetic wave whose peak electric field is Emax, we can use the equation B = E/c, where B is the peak magnetic field, E is the peak electric field, and c is the speed of light. Therefore, the peak magnetic field can be calculated as follows:
B = E/c = Emax/c = 260 V/m / 3 x 10^8 m/s = 8.67 x 10^-7 T
So, the peak magnetic field in this electromagnetic wave is 8.67 x 10^-7 T.
To find the peak electric field in an electromagnetic wave whose peak magnetic field is B max, we can use the equation E = B x c, where E is the peak electric field, B is the peak magnetic field, and c is the speed of light. Therefore, the peak electric field can be calculated as follows:
E = B x c = Bmax x c = 45 x 10^-9 T x 3 x 10^8 m/s = 13.5 V/m
So, the peak electric field in this electromagnetic wave is 13.5 V/m.
To know more about electromagnetic visit:
https://brainly.com/question/17057080
#SPJ11
Let's Review
nerves.
1. Name the three main types of muscles:.
and
2. Which two types are involuntary muscles? Cardiac muscle and
Smooth
Muscle
3. Which type of muscle is attached to bones?
4. What special set of nerves controls smooth muscles?
5. Where in the body is cardiac muscle found?
6. What is the connective tissue that attaches muscles to bones?
7. The
is where the muscle is connected to the nonmoving bone.
is where the muscle is attached to the moving bone.
8. The.
9. Name two activities that are carried out by involuntary muscles.
10. Name three activities that are carried out by voluntary muscles..
LESSONS ON THE HUMAN BODY
1. The three main types of muscles are skeletal muscle, cardiac muscle, and smooth muscle.
2. The two types of muscles that are involuntary are cardiac muscle and smooth muscle.
3. Skeletal muscle is the type of muscle that is attached to bones.
4. Smooth muscles are controlled by the autonomic nervous system.
5. Cardiac muscle is found in the walls of the heart.
6. The connective tissue that attaches muscles to bones is called tendons.
7. The point where the muscle is connected to the nonmoving bone is called the origin, while the point where the muscle is attached to the moving bone is called the insertion.
8. The muscular system works in coordination with the skeletal system to allow movement, maintain posture, and generate body heat.
9. Two activities that are carried out by involuntary muscles are digestion (smooth muscles in the digestive tract) and regulation of blood pressure (smooth muscles in blood vessels).
10. Three activities that are carried out by voluntary muscles are walking, writing, and lifting weights. Voluntary muscles are under conscious control, allowing us to perform intentional movements.
1. The three major muscle types are skeletal muscle, cardiac muscle, and smooth muscle.
2. Two involuntary muscles are cardiac muscle and smooth muscle.
3. Skeletal muscles are muscles that are attached to bones.
4. Smooth muscle is controlled by the autonomic nervous system.
5. Myocardium lies in the walls of the heart. 6. The connective tissue that connects muscles to bones is called tendons.
7. The point where a muscle connects to a non-moving bone is called the origin, and the point where a muscle connects to a moving bone is called the insertion point.
8th place. The muscular system works in tandem with the skeletal system to enable movement, maintain posture, and generate body heat.
9. Two activities performed by involuntary muscles are digestion (smooth muscle of the gastrointestinal tract) and blood pressure regulation (smooth muscle of the blood vessels).
10. The three activities performed by voluntary muscles are walking, writing and weightlifting. Voluntary muscles are under conscious control and allow us to perform purposeful movements.
For such more questions on muscle
https://brainly.com/question/27960158
#SPJ11
A 1.0-cm-tall object is 75 cm in front of a converging lens that has a 30 cm focal length. a. Use ray tracing to find the position and height of the image. To do this accurately, use a ruler or paper with a grid. Determine the image distance and image height by making measurements on your diagram. b. Calculate the image position and height. Compare with your ray-tracing answers in part a.
The image is located at 21.8 cm from the lens and its height is 0.29 cm.
To find the position of the image, we can use the thin lens equation:
1/f = 1/d₀ + 1/dᵢ
where, f is the focal length of the lens,
d₀ is the object distance, and,
dᵢ is the image distance.
We can solve for dᵢ, as:
1/dᵢ = 1/f - 1/d₀
dᵢ = 1 / (1/f - 1/d₀)
Substituting the values, d₀ = -75 cm and f = 30 cm, we get:
dᵢ = 1 / (1/30 cm - 1/-75 cm) = 21.8 cm
So the image is located 21.8 cm from the lens.
To calculate the height, we can use the magnification equation:
m = -dᵢ / d₀
where m is the magnification.
Putting the values, we get:
m = -21.8 cm / -75 cm = 0.29
This tells us that the image is smaller than the object, since the magnification is less than 1.
Now,
m = hᵢ / h₀
where h₀ is the height of the object and hᵢ is the height of the image. Putting in the values, we get:
0.29 = hᵢ / 1.0 cm
hᵢ = 0.29 cm
Learn more about magnification here
brainly.com/question/20368024
#SPJ4
Complete the following nuclear equation and state the type of decay occurring?
The complete nuclear equation is ⁴²₁₉K -> ⁴²₂₀Ca + ⁰₋₁e and the type of decay is beta decay (last option)
How do i complete the nuclear equation?To obtain the complete equation, we first obtain the missing part. The missing part of the equation can be obtain as follow:
Let the missing part be ʸₓZThus, the equation becomes:
⁴²₁₉K -> ʸₓZ + ⁰₋₁e
Now, can obtain the value of x, y and Z. Details below::
for x
19 = x - 1
Collect like terms
x = 19 + 1
x = 20
For y
42 = y + 0
y = 42
For Z
ʸₓZ => ⁴²₂₀Z => ⁴²₂₀Ca
Thus, the complete equation is:
⁴²₁₉K -> ⁴²₂₀Ca + ⁰₋₁e
In nuclear reaction, the symbol ⁰₋₁e represents beta decay.
Therefore, we can conclude that the correct answer to the question is:
⁴²₁₉K -> ⁴²₂₀Ca + ⁰₋₁e, beta decay (last option)
Learn more about nuclear reaction:
https://brainly.com/question/14238796
#SPJ1
Considering the conceptual model of optimal foraging, as cumulative energy investment in foraging increases at a constant rate, the profitability of each food item increases steadily net energy gain increases linearly the net energy gained decreases, then increases total energy eventually obtained plateaus
Considering the conceptual model of optimal foraging, as cumulative energy investment in foraging increases at a constant rate, option d. the total energy eventually obtained plateaus.
Optimal foraging theory suggests that organisms forage in a manner that maximizes their net energy gain, considering the energy costs of searching, handling, and processing food items.
As cumulative energy investment in foraging increases, the profitability of each food item may not increase steadily (option a) because different food items vary in their energy content and handling time. Similarly, net energy gain does not increase linearly (option b) as the energy required to forage increases, and there might be diminishing returns. The net energy gained decreases, then increases (option c) is also not accurate, as the energy gained and energy expended have an inverse relationship; as more energy is invested, the net gain could decrease.
In conclusion, when considering the conceptual model of optimal foraging, as cumulative energy investment in foraging increases at a constant rate, the total energy eventually obtained plateaus (option d). This happens because organisms aim to maximize their net energy gain while accounting for the energy costs of searching, handling, and processing food items.
Know more about the Conceptual model here :
https://brainly.com/question/11274859
#SPJ11
consider a pipe 45.0 cm long if the pipe is open at both ends. use v=344m/s. Now pipe is closed at one end. What is the number of the highest harmonic that may be heard by a person who can hear frequencies from 20 Hz to 20000 Hz?
The highest harmonic that may be heard by a person who can hear frequencies from 20 Hz to 20000 Hz is the fifth harmonic of the closed pipe, which has a frequency of 955.3 Hz.
When the pipe is open at both ends, the resonant frequencies are given by:
f_n = n*v/2L, where n is an integer (1, 2, 3, ...)
When the pipe is closed at one end, the resonant frequencies are given by:
f_n = n*v/4L, where n is an odd integer (1, 3, 5, ...)
In this case, the pipe is 45.0 cm long, which is equal to 0.45 m. The speed of sound is given as v=344 m/s.
The lowest resonant frequency for an open pipe occurs when n = 1:
f_1 = v/2L = 344/(2*0.45) = 382.2 Hz
The second resonant frequency for an open pipe occurs when n = 2:
f_2 = 2v/2L = 2344/(20.45) = 764.4 Hz
The third resonant frequency for an open pipe occurs when n = 3:
f_3 = 3v/2L = 3344/(20.45) = 1146.6 Hz
For a closed pipe, the first resonant frequency occurs when n = 1:
f_1 = v/4L = 344/(4*0.45) = 191.1 Hz
The second resonant frequency for a closed pipe occurs when n = 3:
f_3 = 3v/4L = 3344/(40.45) = 573.2 Hz
The third resonant frequency for a closed pipe occurs when n = 5:
f_5 = 5v/4L = 5344/(40.45) = 955.3 Hz
Click the below link, to learn more about Harmonic frequency:
https://brainly.com/question/31748639
#SPJ11
Oxygen molecules are 16 times more massive than hydrogen molecules. At a given temperature, how do their average molecular speeds compare? The oxygen molecules are moving:
a. at 1/16 the speed
b. 4 times faster
c. at 1/4 the speed
d. 16 times faster
At a given temperature, the average molecular speeds of oxygen and hydrogen molecules are the same. Therefore, the oxygen molecules are moving at the same speed as the hydrogen molecules (option d).
At a given temperature, the average molecular speeds of gases are determined by the root mean square (rms) speed formula, which is given by √(3RT/m), where R is the gas constant, T is the temperature, and m is the molar mass of the gas. Since the temperature is the same for both oxygen and hydrogen molecules, the only difference lies in their molar masses. Oxygen molecules are 16 times more massive than hydrogen molecules. However, the mass cancels out in the rms speed formula. Therefore, the average molecular speeds of oxygen and hydrogen molecules at the given temperature are the same, making option d, "16 times faster," the correct choice.
Learn more about average molecular speeds here:
https://brainly.com/question/30485625
#SPJ11
explain the difference between the diffraction and interference of light. describe the physics of both.
Diffraction and interference are two important concepts in physics related to the behavior of light. Diffraction refers to the bending of light waves around an obstacle or through a small opening, resulting in a spread of light beyond the shadow region.
This phenomenon can be observed in everyday life, such as the appearance of a fringed pattern when light passes through a narrow slit or the spread of light around the edge of a door.
Interference, on the other hand, occurs when two or more light waves meet and combine to form a new wave with a different amplitude and direction. This can produce patterns of constructive or destructive interference, depending on the relative phase of the waves. Interference is commonly observed in experiments involving lasers and thin films, as well as in natural phenomena like the iridescent colors of soap bubbles and oil slicks.
The physics behind diffraction and interference can be explained by the wave nature of light, which is described by its wavelength, frequency, and amplitude. When light waves encounter an obstacle or a narrow opening, they diffract or bend around it, resulting in a spread of light beyond the shadow region. This effect is more pronounced for longer wavelengths, such as those of red and infrared light, and can be minimized by using smaller openings or higher frequencies.
Interference, on the other hand, results from the superposition of two or more waves, which can either reinforce or cancel each other out depending on their relative phase. This effect is commonly observed in experiments involving lasers and thin films, as well as in natural phenomena like the iridescent colors of soap bubbles and oil slicks.
diffraction and interference are two important concepts in physics related to the behavior of light. While diffraction refers to the bending of light waves around an obstacle or through a small opening, interference occurs when two or more light waves meet and combine to form a new wave with a different amplitude and direction. Both phenomena can be explained by the wave nature of light and have important applications in a wide range of fields, including optics, telecommunications, and materials science.
To know more about Interference visit:
brainly.com/question/16098226
#SPJ11
Bode plots can help find the steady-state error. That is, one can find the error constants Kp, K, and K, from the Bode magnitude plot. Given the open-loop Bode magnitude plot below, find the steady-state error eco) of the closed-loop system to a unit step input. 20 dB
To find the steady-state error (ess) of the closed-loop system to a unit step input from the given open-loop Bode magnitude plot, we need to use the formula:
From the given open-loop Bode magnitude plot, we can see that at the frequency where the magnitude is 20 dB, the phase is -180 degrees. This corresponds to a phase shift of pi radians. At this frequency, the gain of the open-loop transfer function is 0 dB.
which corresponds to a gain constant Kp of 1.Substituting Kp = 1 into the formula for steady-state error, we get: ess = 1 / (1 + 1) = 1/2 Therefore, the steady-state error of the closed-loop system to a unit step input is 1/2 or 50%.
To know more about magnitude visit
https://brainly.com/question/29766788
#SPJ11
Which scenario is an example of the "Iterate" step in the engineering design
process?
A. After choosing one solution to try, the team comes up with a
model so it can be tested.
B. After finding and improving a solution, the team communicates
the solution to other people in the organization.
C. After generating several possible solutions, the team chooses one
solution to try.
D. After testing a solution, the team changes some components to
improve on the original design.
The scenario that is an example of the "Iterate" step in the engineering design process is, "After testing a solution, the team changes some components to improve on the original design." The correct option is D.
An engineering design process is a systematic approach used by engineers to develop and implement solutions to problems. It involves a series of steps, from identifying the problem to testing and refining a solution.
Option A, "After choosing one solution to try, the team comes up with a model so it can be tested" is an example of the "Prototype" step, where a preliminary version of the design is created and tested.
Option B, "After finding and improving a solution, the team communicates the solution to other people in the organization" is an example of the "Communicate" step, where the solution is presented and shared with others.
Option C, "After generating several possible solutions, the team chooses one solution to try" is an example of the "Conceptualize" step, where possible solutions are brainstormed and evaluated before choosing one to pursue.
Therefore, option D is the correct answer as it describes the "Iterate" step, where the solution is tested, evaluated, and modified in an iterative process to improve its effectiveness and efficiency.
To learn more about the engineering design process click:
https://brainly.com/question/31214240
#SPJ1
A longitudinal earthquake wave strikes a boundary between two types of rock at a 47 degree angle. As the wave crosses the boundary, the specific gravity of the rock changes from 4.0 to 2.8
Assuming that the elastic modulus is the same for both types of rock, determine the angle of refraction.
sigma = ?
The angle of refraction can be determined using Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the velocities of the wave in the two media.
However, since the elastic modulus is the same for both types of rock, the velocity of the wave remains constant, and the angle of refraction is equal to the angle of incidence. Therefore, the angle of refraction in this scenario is 47 degrees.
Snell's law is given by:
[tex]n1 * sin(θ1) = n2 * sin(θ2)[/tex]
where n1 and n2 are the refractive indices of the two media, and θ1 and θ2 are the angles of incidence and refraction, respectively.
In this case, since the elastic modulus is the same for both types of rock, the velocities of the wave in the two media are the same. This means that the refractive indices are also the same (since the refractive index is directly proportional to the velocity). Therefore, we can rewrite Snell's law as:
[tex]sin(θ1) = sin(θ2)[/tex]
Since the sine function is symmetric about 45 degrees, the angle of refraction (θ2) will be the same as the angle of incidence (θ1). Therefore, the angle of refraction in this scenario is 47 degrees.
learn more about wave here:
https://brainly.com/question/25954805
#SPJ11
estimate the heat required to heat a 0.19 −kg apple from 12 ∘c to 33 ∘c . (assume the apple is mostly water.)
To estimate the heat required to heat a 0.19 kg apple from 12°C to 33°C is 16,678 Joules
we'll use the formula for heat transfer: Q = mcΔT, where Q is the heat, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
Since the apple is mostly water, we can assume the specific heat capacity (c) of water, which is 4.18 J/(g·°C). Convert the mass of the apple to grams (1 kg = 1000 g): 0.19 kg = 190 g. Now, calculate the temperature change (ΔT): ΔT = 33°C - 12°C = 21°C.
Plug in these values into the formula: Q = (190 g) x (4.18 J/(g·°C)) x (21°C). Solving for Q, we get Q ≈ 16,678 J.
So, approximately 16,678 Joules of heat are required to heat the 0.19 kg apple from 12°C to 33°C, assuming the apple has the same specific heat capacity as water.
Know more about Heat Transfer here:
https://brainly.com/question/10670781
#SPJ11
Consider light passing from air to water. What is the ratio of its wavelength in water to its wavelength in air
The difference between light's wavelength in air and water is roughly 0.75. This indicates that light's wavelength in water is roughly 75% smaller than it is in air.
Consider light passing from air to water. The ratio of its wavelength in water to its wavelength in air is given by the ratio of their refractive indices.
Light's wavelength is impacted by a change in its speed as it travels through different media. The speed of light is lowered in a medium relative to its speed in a vacuum, and this reduction is measured by the medium's refractive index. Air has a refractive index of roughly 1, while water has a refractive index of roughly 1.33.
To find the ratio of the wavelength in water (λ_water) to the wavelength in air (λ_air), we can use the formula:
λ_water / λ_air = n_air / n_water
where n_air and n_water are the refractive indices of air and water, respectively. Plugging in the values, we get:
λ_water / λ_air = 1 / 1.33
This simplifies to:
λ_water / λ_air ≈ 0.75
To know more about the refractive index, click here;
https://brainly.com/question/23750645
#SPJ11
A resistor is made from a hollow cylinder of length, l, innerradius a, and outer radius b. The region a
The region between the inner and outer radii of the cylinder is filled with a material that has a resistivity of ρ. The resistance of the cylinder can be calculated using the formula R = (ρ*l)/(π*(b²-a²)).
This formula takes into account the length of the cylinder, the resistivity of the material, and the difference in the inner and outer radii. The larger the difference between the inner and outer radii (b-a), the larger the resistance will be. Additionally, the longer the cylinder (l), the larger the resistance will be.
To provide a complete answer, I need to know the material's resistivity (ρ) and what specifically you'd like to calculate. However, I can give you a general approach using the given terms:
To find the resistance of a hollow cylindrical resistor with length (l), inner radius (a), outer radius (b), and resistivity (ρ), you can follow these steps:
1. Calculate the cross-sectional area of the hollow cylinder:
A = π(b² - a²)
2. Use the formula for resistance:
R = ρ * (l / A)
Substitute the values of l, a, b, and ρ in the formula to find the resistance (R) of the hollow cylindrical resistor.
Learn more about cylinder here,
https://brainly.com/question/31336342
#SPJ11
by what factor does an object's momentum change if you double its speed when its original speed is 30 m/s ?
The factor by which an object's momentum changes when we double its speed is 2.
When an object is moving, it has momentum, which is defined as the product of its mass and velocity. Momentum is a vector quantity, which means it has both magnitude and direction. If we double the speed of an object, we also double its velocity, and therefore its momentum. In other words, if the original speed of an object is 30 m/s, and we double it to 60 m/s, then its momentum will also double. This is because momentum is directly proportional to velocity. Therefore, if we double the velocity of an object, we also double its momentum. In terms of the equation for momentum, p = mv, doubling the velocity will result in a new momentum of 2mv, which is twice the original momentum.
To know more about momentum visit:
https://brainly.com/question/30677308
#SPJ11
For a cubical critter of length L, the ratio of strength to mass scales like . This scaling can be used to explain why the leg bones of large ungulates (e.g. water buffalos) have larger ratios than the leg bones of smaller ungulates (e.g.gazelles). OL2; diameter:length 1/L; length:diameter L; diameter:length OL; length:diameter 1/L; diameter:length
The ratio of strength to mass scales like 1/L for a cubical critter of length L. This means that as the length of the critter increases, the ratio of its strength to mass decreases.
This scaling can be used to explain why the leg bones of large ungulates (e.g. water buffalos) have larger ratios than the leg bones of smaller ungulates (e.g. gazelles). Since water buffalos are larger in size than gazelles, their leg bones need to be stronger to support their weight. Therefore, their leg bones have a larger ratio of strength to mass compared to the leg bones of smaller ungulates.
Thus, the ratio of strength to mass scales like 1/L for a cubical critter of length L, and this scaling can be used to explain why the leg bones of large ungulates have larger ratios than the leg bones of smaller ungulates.
To know more about cubical critter, click here
https://brainly.com/question/17102388
#SPJ11