If friction is neglected, at any given instant both objects will have the same c) Height.
What is friction?
Friction is the resistance to motion that results from two objects rubbing against one another. Two objects rubbing against one another causes friction. Motion is opposed by friction, which works against the motion.
When an object slides over another object, friction slows it down. As a result, energy is used. However, the energy does not fade away. Kinetic energy, also referred to as moving energy, is transformed into heat energy. We rub our hands together when it's cold because of this. Rub them together, and friction and heat will result.
Learn more about friction
https://brainly.com/question/13000653
#SPJ4
Determine the quantity of charge on a plastic tube which has been rubbed with animal fur and gained 3. 8 x 10^9 electrons
The quantity of charge on a plastic tube that has been rubbed with animal fur and gained 3. 8 x 10^9 electrons is The quantity of charge on the plastic tube is 3.8 x 10^9 electrons.
The quantity of charge on the plastic tube is 3.8 x 10^9 electrons. To calculate this value, we can use the equation q = n*e, where q is the charge, n is the number of electrons and e is the elementary charge (1.6 x 10^-19 C). Substituting in the values given, we get q = 3.8 x 10^9 * 1.6 x 10^-19 = 6.08 x 10^-10 C. This means that the plastic tube has gained a charge of 6.08 x 10^-10 Coulombs, which is equivalent to 3.8 x 10^9 electrons.
This can be explained by the process of triboelectricity, which is the transfer of electrons between two materials due to rubbing them together. In this case, the animal fur must have had a higher electron affinity than the plastic, which caused electrons to be transferred from the fur to the plastic tube.
To know more about electrons refer to the link brainly.com/question/1255220
#SPJ4
Why is 90-degree angle important?
90-degree angles are used as reference points for measuring other angles and for defining trigonometric functions and vector relationships.
In trigonometry, the sine, cosine, and tangent functions are defined in terms of the ratios of the sides of a right triangle, where one angle is 90 degrees. In addition, in vector calculus, the dot product and cross product of two vectors are often defined in terms of the angle between the vectors, and a 90-degree angle represents a perpendicular or orthogonal relationship between the vectors. The 90-degree angle is also important in mechanics and engineering as it is used to define the concept of torque, which is the rotational equivalent of linear force. Torque is defined as the product of a force and the perpendicular distance from the line of action of the force to the axis of rotation. Furthermore, it is also used to define the concepts of stress, strain and moment of inertia in strength of materials and mechanics.
Learn more about the trigonometric functions here:
https://brainly.com/question/6904750#
#SPJ4
Two particles P and Q are initially at rest 1.64 m apart, P has a mass of 1.43 kg and Q a mass of 4.29 kg. P and Q attract each other with a constant force of 1.79 x 10-2 N. No external forces act on the system. (a) Describe the motion of the center of mass. (b) At what distance from P’s original position do the particles collide?
(a)The center of mass of the system has no acceleration, and remains at the same position as it was earlier.
(b)The particle P, collide at a distance 1.23m from P's original position.
What is acceleration?Vector quantities include accelerations. The direction of the net force imposed on an object determines its acceleration in relation to that force.Acceleration in a body is the result of imbalanced forces.The three main categories of accelerated motions are uniform, non-uniform, and average acceleration. When an item moves in a straight path with an increase in speed occurring at regular intervals of time, this motion is referred to as having uniform acceleration.Any modification of motion's speed or direction is referred to as acceleration. When anything is speeding up, slowing down, or not traveling straight ahead, it is said to be accelerating.To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ4
Press the hotspot that indicates the location that a string will experience the least tension during vertical circular motion. Assume that the speed of the ball remains constant.
which one will experience the least tension t3 t2 t1 or t4
The least tension will be experienced by T3
The weight of a moving object causes tension, which is the force applied along the length of a string, rope, or cable. The force that maintains an object moving in a circular direction when it is in a vertical circular motion is called tension. Perpendicular to the circle's radius, the tension in the string is pointed in the direction of the circle's centre.
Due to the centripetal force required to maintain the object moving in a circular motion, the tension in the string varies as the object moves in a vertical circle, with the highest tension occurring at the top of the circle and the least tension occurring at the bottom. In the given case, T3 will experience the least tension during vertical circular motion, assuming that the speed of the ball remains constant. This is because T3 is the point on the string that is closest to the circle's centre, and thus is subject to the least amount of tension as the ball moves in a vertical circle.
Read more about tension on:
https://brainly.com/question/24994188
#SPJ4
To find the acceleration of a glider moving down a sloping air track, you measure its velocities (V1 and V2) at two points and the time t it takes between them, as follows:V1=0. 21+/- 0. 05m/s, V2=0. 85 +/- 0. 05m/s, t=8. 0 +/- 0. 1sa) Assuming all uncertainties are independent and random, find the average acceleration, a=(v2-v1)/t , and its uncertainty. B) How well does your result in part (a) agree with your friends theoretical prediction that a=0. 13 +/- 0. 01m/s^2
0.08 m/s2 is the average acceleration. The acceleration's degree of uncertainty is 0.0135 m/s2.
Describe acceleration.Accelerations are included in vector quantities. An object's acceleration in relation to a net force is determined by the direction of that force. Force imbalances lead to acceleration in a body.
Uniform, non-uniform, and average acceleration are the three primary types of accelerated motions. It is said to have uniform acceleration when an object moves in a straight line with an increase in speed that happens at regular intervals of time.
Acceleration is the term used to describe any change in the speed or direction of a motion. Anything that is accelerating is moving faster, slower, or in a direction other than straight forward.
To learn more about acceleration visit:
brainly.com/question/12550364
#SPJ4
If hydrogen gives off 10 units of energy, but takes 15 units of energy to produce, what is its net energy ratio
The net energy ratio of hydrogen is 0.67.
What is net energy ratio?The net energy ratio, also known as energy return on investment (EROI), is a measure of the efficiency of a fuel source or energy system. It represents the ratio of the energy output to the energy input, or the amount of energy that is produced compared to the amount of energy that is required to produce it.
A net energy ratio of 1 means that the energy output is equal to the energy input, and that no net energy is produced.
In the case of hydrogen, it gives off 10 units of energy but takes 15 units of energy to produce, so the net energy ratio would be:
Energy output / Energy input = 10 units / 15 units = 0.67
Hence, the net energy ratio of hydrogen is 0.67. This means that for every 1 unit of energy put into producing hydrogen, only 0.67 units of energy are obtained.
To learn more about hydrogen from the given link:
https://brainly.com/question/28937951
#SPJ4
How is coal extracted from mountaintop removal mines? (site 2)
Coal is extracted from mountain top by removal of top soil and the use of explosives.
What is a coal?A coal is definitely as the solid substance that is made up of mainly carbon and other constituent elements such as hydrogen, sulfur, oxygen, and nitrogen.
The uses of coal include the following:
cement production, carbon fibers and foams, medicines, tars, synthetic petroleum-based fuels, and home and commercial heating.To extract coal from the mountain top the following is carried out:
The top soil of the area involved us being removed and
Explosives are then used to expose the underlying coal seams.
Learn more about carbon here:
https://brainly.com/question/20994647
#SPJ1
is the electron's speed at f greater than, less than, or equal to its speed at i?
O The electron's speed at f is less than its speed at i. O The electron's speed at f is equal to its speed at i. O The electron's speed at f is greater than its speed at i. O There is not enough data to determine the correct answer.
The correct option is B, The electron's speed at f is equal to its speed at i.
Electrons are subatomic particles that are found in atoms. They are the negatively charged particles that orbit the nucleus of the atom, and they have an extremely small mass. Electrons travel at different speeds depending on their energy level. At their lowest energy level, electrons move at an extremely slow speed, about one thousandth of the speed of light. As the electrons gain energy, their speed increases.
In a vacuum, when electrons have the highest energy level, they can travel at a speed of nearly the speed of light, which is around 186,000 miles per second. In a vacuum, the electrons would have the same speed regardless of their mass. Electrons also move slower inside a material, such as a metal, due to the presence of other atoms. Electrons in metals usually move at a speed of about 1/10th the speed of light. This slower speed is due to the electrons having to pass through energy barriers created by the other atoms in the metal. In general, electrons are very fast particles that can travel at speeds up to nearly the speed of light.
To learn more about Electron's speed visit here:
brainly.com/question/14827627
#SPJ4
when a falling firecracker explodes, the momenta of its pieces _______.
when a falling firecracker explodes, the momenta of its pieces vectorially add up to equal the initial momentum of the firecracker.
When the firecracker bursts, the vector sum of the momenta of its fragments adds up to the firecracker’s momentum just before bursting.
A falling firecracker explodes into two pieces. The momenta of the fragments combine by vector rules to equal the original momentum of the falling firecracker. Momentum is equal to mass multiplied by velocity.
According to the conservation of momentum, the initial momentum of the system is equal to the final momentum. The condition for the validity of momentum conservation is that no external force should exert on the system.
To know more about Momentum:
https://brainly.com/question/17608504
#SPJ4
A new way of "multiplying" two vectors is introduced in this chapter. What is it called? Select one: O a. The tensor product. O b. The angular product. Oc. The scalar product. O d. The dot product. O e. The cross product.
The correct option is option e) cross product
The cross-product is a new way of "multiplying" two vectors. It results in a new vector that is perpendicular to both the original vectors and its magnitude is given by the area of the parallelogram formed by the two original vectors.
In three-dimensional space, cross-product is a binary operation on two vectors. It yields a vector perpendicular to both vectors. a b represents the vector product of two vectors, a and b. Its resulting vector is parallel to a and b. Cross goods are another name for vector products.
The cross-product has four basic applications:
calculating the angle () between two vectorsdetermining a vector normal to a planecalculating the moment of a force about a pointcalculating the moment of a force about a line.Read more about Cross-Product from:
https://brainly.com/question/14708608
#SPJ4
If petroleum used by a power generator is 50 percent efficient and the lines that carry the electricity to a light are 25 percent efficient, what is the energy efficiency of converting the oil into the light
The energy efficiency of converting the oil into the light can be calculated by multiplying the efficiencies of each step in the process.
Calculation-Efficiency = (0.50) * (0.25) = 0.125 or 12.5%
So the energy efficiency of converting petroleum oil into the light is 12.5%. This means that only 12.5% of the energy in the oil is converted into usable light. The rest is lost as heat or other forms of energy during the process.
How effective is the process of turning oil into light overall?How effective is the process of turning oil into light overall? Chemical energy equivalent to 6,000 MJ is found in one barrel of crude oil. An oil-burning power plant can produce 2,000 MJ of energy from a single barrel of crude oil.
to know more about energy efficiency here:
brainly.com/question/28939461
#SPJ4
Complete this sentence. If the cone of force is facing an observer, the impact comes from the ________ side of the observer.
left
same
right
opposite
If the cone of force is facing an observer, the impact comes from the opposite side of the observer.
What is Newton's third law of motion?
Newton's third law of motion states that action and reaction force are equal and opposite. That is for every action, there is an equal and opposite reaction.
Mathematically, the formula for Newton's third law of motion is given as;
Fa = - Fb
where;
Fa is the impact force or force exerted on BFb is the reaction force of B due to applied force of AThus, when a force is applied from a side, the observed force or reaction will be directed in opposite direction. The force exerted and the reaction force are both equal in magnitude but occurs in opposite direction.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
The sum of kinetic energy and potential energy
of the particles in a material is blank
The sum of kinetic energy and potential energy of the particles in a material is known as mechanical energy.
What is Kinetic energy?The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
What is potential energy?Due to its position, an object has the ability to store energy. For instance, when a demolition machine's heavy ball is held in an elevated position, it is storing energy. Potential energy is the name for this positional energy that has been stored. Similar to how a drawn bow can store energy due to its posture, There is no energy in the bow while it is in its normal position, or when not drawn. The bow can yet store energy when its position is changed from its normal equilibrium position because of its position. Potential energy is the name for this positional energy that has been stored. Potential energy is the energy of position that a thing has stored inside it.
To know more about Kinetic energy, check out:
https://brainly.com/question/8101588
#SPJ1
A car traveling at a constant speed covers a distance of 750 m in 25 s.What is the cars speed
Answer:
30 m/s
Explanation:
Answer:
The speed is equal to Distance divided by Time.
The SI Unit of Speed is m/s or meters per second.
V = S/T
= 750/25
= 30 m/s
How do you calculate the fall of a ramp?
The fall of the ramp can be calculated by the falling style of the ramp. like if the ramp is falling in the rolling motion, then we can calculate the fall of the ramp by the process by which we calculate of the rolling motion of any object.
Rolling motion happens when an object roll over from a ramp or any other sloppy surface whether it is rough or smooth. many forces act on it at the same moment. also in many forces rolling tangential force and gravitational force is also acting on it at the same moment. in which the gravitational force is acting on it at a bigger pace and plays an important role in rolling of the object from the ramp or any other sloppy surface. hence, by this information we can firmly consider that a heavier object go down a ramp at a same pace as a lighter object go down a ramp because of gravitational force acting on it in a major form.
Learn more about Rolling motion:
brainly.com/question/29568301
#SPJ4
An ambulance racing down the highway has 14,600,000 J of energy. It is moving 34 m/s. What is the mass of the ambulance? (Round
your answer to two decimal places) KE=1/2mva^2
The ambulance weighs 16.97 tons, and the kinetic energy of an object is given by the formula KE = 1/2mv2, where m is the object's mass, v is its velocity, and KE is the kinetic energy.
What is kinetic energy and above explanation?Kinetic energy is the energy an object possesses due to its motion, and it is calculated as 1/2mv^2, where m is the mass of the object and v is its velocity. It represents the ability of an object to do work by virtue of its motion.Given that the ambulance has 14,600,000 J of energy and is moving at 34 m/s, we can use this formula to find the mass of the ambulance:KE = 1/2mv^214,600,000 J = 1/2m(34 m/s)^2To solve for mass, we can divide both sides of the equation by (1/2)(34 m/s)^2:m = (14,600,000 J) / [(1/2)(34 m/s)^2]m = 14,600,000 J / (1/2)(1156 m^2/s^2)m = 14,600,000 J * (2/1156 m/s^2)m = 16.97 tonSo the mass of the ambulance is approximately 16.97 ton.
To learn more about kinetic energy refer:
brainly.com/question/8101588
#SPJ4
if 15.0 g of water vapour at 135°C cools to 100°C, condenses to liquid water, and then cools to 90°, how much energy is released to the environment?
The heat that is evolved by the environment is 36.42 kJ.
What is the heat that is involved?We know that heat is a form of energy that can be known for the fact that it could lead to a change in the temperature of the object. We have to note that the energy that is released is a sum total of all the process that are involved here.
We know that;
H = (15 * 4.18 * (135 - 100)) + (15 * 2240) + (15 * 4.18 * (100 - 90))
H = 2194.5 + 33600 + 627
H = 36.42 kJ
The total heat that has been evolved would now be 36.42 kJ.
Learn more about heat:https://brainly.com/question/28302909
#SPJ1
Frank is pulling on a rope to drag his backpack to school across the ice. He pulls upwards and rightwards with a force of 26.7 Newtons at an angle of 17 degrees above the horizontal to drag his backpack a horizontal distance of 129 meters to the right. Determine the work done upon the backpack. in joules.
The work done upon the backpack is 3293 Joule.
What is force?
The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
The work done upon the backpack is = applied force × displacement × cosα
= 26.7 N × 129 meters × cos17°
= 3293 Joule.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
The power required to exert 1 N force, over a distance of 1 m in 1 second is. A) 1 W. B) 2 W. C) 1/3 W. D) 3 W. E) none of these.
Answer:
A) E = 1 N * d = 1 Newton-Meter = 1 Joule
P(ower) = E / t = 1 N-m / t = 1 Joule / sec = 1 W
Two waves meet while traveling through the same medium. The crests of wave one meet up with the crests of wave two. If wave one has an amplitude of 4 and wave two has an amplitude of 3, what is the amplitude of the wave resulting from the interference
If wave one has an amplitude of 4 and wave two has an amplitude of 3, what is the amplitude of the wave resulting from the interference
Equation Used
The resulting intensity is calculated as follows: I = (sqrt(I1)-sqrt(I2))2
3 variables and 1 function are used in this formula.
Used Functions
Square root function and sqrt (Number)
used variables
The effect of two intensities coming together is called the "resulting intensity" (measured in candela).
The energy that the first wave transfers over a surface of a given area in a unit of time is measured as intensity 1 (measured in candela), which is equal to the energy density times the wave speed.
The energy that the second wave transfers over a surface of a certain area in a unit of time is measured as intensity 2 (measured in candela), which is equal to the energy density times the wave speed.
No conversion is necessary for intensity 1: 4 candela to 4 candela.
Intensity 2: No Conversion Needed 3 Candela to 3 Candela
Replacement of Input Values in a Formula
I is equal to (sqrt(I1)-sqrt(I2))2 --> (sqrt(4)-sqrt(3)).
2 Assessing...…
I = 0.0717967697244909
Candela: 0.0717967697244909 No Conversion Is Necessary
RESULT 0.0717967697244909 A candela Outcome Intensity (Calculation completed in 00.016 seconds)
What is Wave Interference?
When two waves that are moving in opposite directions arrive at the same location simultaneously, interference results. The two waves will combine into a temporary, larger wave with an amplitude equal to the sum of their individual amplitudes if their crests and troughs completely line up. Constructive interference is what this is. On the other hand, if the crests of two waves coincide, they either combine to form a smaller wave or completely cancel each other out. We refer to this as destructive interference.
Learn more about Hand here:
https://brainly.com/question/12762814
#SPJ4
With the Sun and Moon in this position, what does the side of the earth facing the moon experience? ft Select one O A a normal high tide B. a neap high tide C. a spring high tide D. a spring low tide a neap low tide F a normal low tide age
With the Sun and Moon in this position, the side of the earth facing the moon experiences a spring high tide. Thus Option C is the answer.
A spring tide is a tide that occurs when the gravitational pull of the Moon and the Sun are in alignment. During a new moon or full moon phase, the gravitational pull of the Moon and the Sun combine to produce stronger than normal high tides and stronger than normal low tides. The term "spring tide" does not refer to the season of spring, but rather the tide's "springing forth" of water.
During a spring tide, the difference between high tide and low tide is at its greatest, and the water level rises higher and falls lower than during a neap tide. This is because the gravitational pull of the Moon and Sun are working together to produce the tide, rather than against each other. This results in a high tide that is higher than a normal high tide, referred to as a spring high tide.
It is important to note that spring tides occur twice a month, around the time of the new and full moon, when the Moon and Sun are in alignment.
Learn more about Tides:
https://brainly.com/question/29417771
#SPJ4
The film strip that emerges from the camera is usually a ______________. That is, its color and light values are the opposite of those in the original scene.
The film strip that emerges from the camera is usually a Negative. That is, its color and light values are the opposite of those in the original scene.
What controls how much light enters the camera?One of the three camera settings that affects exposure is the aperture. The shutter speed, aperture, and ISO settings are together referred as as the "exposure triangle." By adjusting the relative amount of light entering a camera lens, an aperture can change the exposure.
What part of the camera and eye controls how much light enters?A camera's shutter can close or open depending on how much light is required to expose the film at the rear of the device.
To know more about camera visit:-
https://brainly.com/question/10944268
#SPJ4
The same amount of steel used to create eight solid steel balls, each with a radius of 1 inch, is used to create one larger steel ball. What is the radius of the larger ball
Answer:
2 inches
Explanation:
Volume of a sphere = 4/3 pi r^3
for the EIGHT balls total volume = 8 * 4/3 pi (1^3) = 32/3 pi
This is the volume of the made-up ONE ball
4/3 pi r^3 = 32/3 pi
4/3 r^3 = 32/3
r^3 = 32/3 * 3/4
r^3 = 8
r = 2 inches
39) Three different dynamic carts of different masses are rolled down a ramp. The heaviest one rolls down the ramp the fastest. Before concluding that a more massive cart will roll down a ramp faster, what experiment with these three carts might you want to do
According to the given information the answer is Add masses to each car until they have the same mass, then test the carts again.
What is dynamic carts?Features three low friction ball bearing wheels and matched axles to assure their rolling along a true line without deviation to produce accurate data, and a sturdy steel body to endure rigorous handling. Each cart is around 1.5 kg in weight. The ends of the cart lift above the bed to transport a brick or any other bulk, and the cart bed is covered with a rubber pad. At one end of the cart, there is a clip where a tape can be fastened. Each cart's pins fit into the holes in the others, allowing the mass to be doubled by stacking them.
Learn more about Dynamic carts from given link
brainly.com/question/11066593
#SPJ4
The complete question is-
Three different dynamic carts of different masses are rolled down a ramp. The heaviest one rolls down the ramp the fastest. Before concluding that a more massive cart will roll down a ramp faster, what experiment with these three carts might you want to do?
Run an experiment with the ramp at a different angleFind a fourth cart to add to the test, then test againChange the surface of the ramp, then test the carts againAdd masses to each car until they have the same mass, then test the carts againa car weighs 3600 kg is traveling at 21.0 m/s. the driver doesn?t notice a red light and rear-ends another car at rest. both cars stick together and move with a speed of 9.0 m/s. what is the mass of the car that was at rest?
Answer:
Below
Explanation:
Use law of conservation of momentum
momentum before crash = momentum of the system after crash
3600 kg * 21 m/s = (3600+ x ) * 9
solve for x = 4800 kg
A toy car move around a loop-the-loop track. The loop i 0. 5 high. What i the minimum peed of the car at the top of the loop for it to tay on track?
Pleae work it!!
I found all the anwer are 1. 57m/ but it i
0. 78m/
The minimum speed of the car at the top of the loop for it to stay on track be 1.57 m/s.
What is speed?The speed of an item, which is a scalar quantity in everyday usage and kinematics, is the size of the change in that object's position over time or the size of the change in that object's position per unit of time.The speed at which an object's location changes in any direction.The distance traveled in relation to the time it took to travel that distance is how speed is defined.As a result, the fundamental unit of time and the basic unit of distance are combined to form the SI unit of speed. Thus, the metre per second (m/s) is the SI unit of speed.To learn more about speed refer to:
https://brainly.com/question/13943409
#SPJ4
What is the sound level of rustling of leaves?
The sound level of rusting leaves is 20db.
Rustle is a quiet, muted cracking sound made when dry paper or leaves are moved. The movement of weak objects, like the leaves, produces a gentle sound. Ruffle would be the appropriate response because "leaves" is the noun in the sentence.
Over time, so many people have been mesmerized by the sounds of wind in the trees and the rustling of leaves, that they came up with the term "psithurism" to describe them. Psithurism has a silent first "p," like many other words that start with "ps," and is pronounced sith-err-iz-um.
We sometimes refer to a wind that is howling when it is strong and noisy: The trees shook as the wind howled.
To learn more about Sound level from given link
https://brainly.com/question/30160873
#SPJ4
A red cart is moving rightward with a momentum of 50 kg cm/s when it collides with a blue cart of equal mass that is initially at rest. The two carts stick together and move to the right with the same speed after the collision.
The final velocity of the red-blue carts system is 5 cm/s.
What is the final speed of the two carts after collision?
The final speed of the two carts, that is the red cart and the blue cart system after the collision is calculated by applying the principle of conservation of linear momentum.
Pi = Pf
m₁u₁ + m₂u₂ = v ( m₁ + m₂ )
where;
m₁ is mass of the red cartm₂ is the mass of the blue cartu₁ is initial velocity of the red cartu₂ is the initial velocity of the blue cartv is the final velocity of the two carts after the collisionm₁u₁ + 0 = v ( m₁ + m₂ )
m₁u₁ = v ( m₁ + m₂ )
v = ( m₁u₁ ) / ( m₁ + m₂ )
The final velocity of the red-blue carts system is calculated as;
v = ( 50 kg cm/s ) / ( 5 kg + 5kg )
v = 5 cm/s
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
The complete question is below:
A red cart is moving rightward with a momentum of 50 kg cm/s when it collides with a blue cart of equal mass that is initially at rest. The two carts stick together and move to the right with the same speed after the collision. What is the final velocity of the two carts system after the collision if the mass of the blue cart is 5 kg.
A 1000 kg car is travelling at 67 mph. When it reaches a construction zone the driver brakes for 200 m until the car is travelling at 49 mph. What force did the brakes apply to the car? Assume that there are 1609 metres in one mile and give your answer to the nearest thousand. use v^2 =u^2 +(2xAxS) and F=ma
Velocity of moving vehicle=v 0, and decceleration =a and Final velocity of the vehicale =0.
What is Velocity?Once more, the stopping distance is far more than the braking distance. It starts when the threat is identified and concludes when the car stops.
The reaction distance plus the braking distance, or points 1 and 2, together make up the stopping distance.
Therefore, in order to compute the necessary stopping distance, I must determine and add two partial values (reaction distance + brake distance). The reaction time is the amount of time it takes for a driver to spot a danger before braking.
Therefore, Velocity of moving vehicle=v 0, and decceleration =a and Final velocity of the vehicale =0.
To learn more about velocity, refer to the link:
https://brainly.com/question/18084516?
#SPJ1
In a sealed container, Sarah combines a reactant with a mass of 8 grams with another reactant with a mass of 11 grams. After the reaction, what is the most reasonable prediction Sarah can make for the total mass of the products of this reaction?
6g
8g
10g
19g
which one
The most reasonable prediction Sarah can make for the total mass of the products of this reaction would be = 19g.
What is law of conservation of mass?The law of conservation of mass states that mass in neither created nor destroyed but can be changed from one form to another.
From the set up of the reaction carried out by Sarah, the container was in an enclosed medium.
Therefore since there is no loss of mass, the total mass of the products of this reaction would be = 11+8 = 19g.
Learn more about mass here:
https://brainly.com/question/28021242
#SPJ1