The time will take a skateboard and dog with force 9N to stop the skateboard and dog is 8 seconds.
The force is defined as the push or pull of an object. The force equals the mass and acceleration of the object obtained from Newton's second law. Acceleration defines the change in velocity by the time taken. The force is defined as the rate of change of momentum and time. Momentum is defined as the product of mass and velocity and the unit of momentum is Kg.m/s.
From the given,
mass of dog (m) = 24 kg
The initial speed of dog (u) = 3 m/s
mass of skateboard and dog = 3 + 24 = 27 kg.
The final speed of dog (v) = 0 m/s
Force = 9N
time =?
F = dp/dt, rate of change of momentum and time.
F(dt) = dp
dt = (dp)/F
=(Pf - Pi)/F
Pf is the final momentum and Pi is the initial momentum.
Pi = m×v = 24×3 = 72 kg.m/s²
Pf = m×v = 27×0 =0 kg.m/s²
dt = (0-72)/9
= 8s
Thus, the time taken to stop the skateboard and dog is 8s.
To learn more about momentum:
https://brainly.com/question/30677308
#SPJ1
A velocity selector is to be constructed using a magnetic field in the positive y direction. If positively charged particles move through the selector in the positive z direction, what must be the direction of the electric field? Repeat for the case of negatively charged particles.
Answer:
you are crazy
Explanation:
The three wave pulses in (Figure 1) travel along the same stretched string. Part A Rank in order, from largest to smallest, their wave speeds va, Ub, and U. To rank items as equivalent, overlap them.
The wave velocity depends on the tension in the string and the mass per unit length of the string.
These two variables he remains the same for all three strings, so the speed is equal. Va = Vb = Vc
What is the wave speed?Wave speed commonly refers to velocity, but velocity actually means both speed and direction. A wave's velocity is equal to its wavelength times its frequency (the number of oscillations per second) and is independent of its intensity.
Why is wave speed important?Wave velocity is an important parameter that can accurately describe the mechanical properties of rocks.
What does wave speed depend on?The speed of a wave is independent of time and the source of the wave, but the speed of a wave depends on the wavelength of the wave propagating in a particular medium. Wave speed depends on the medium used.
Learn more about wave velocity:
brainly.com/question/13867834
#SPJ4
A series RLC circuit consists of a 280 ohm resistor, a 25 mH inductor, and a 18 mu F capacitor. What is the rms current if the emf is supplied by a standard 120V, 60 Hz wall outlet? Express your answer to two significant figures and include the appropriate units.
V' = 61.8 Volts is the rms current if the emf is supplied by a standard 120V, 60 Hz wall outlet.
What is called circuit?A circuit in electronics is a full circular channel via which electricity flows. A current source, conductors, and a load make up a straightforward circuit. In a broad sense, the word "circuit" can refer to any permanent channel through which electricity, data, or a signal can pass.
R = resistance of the resistor = 280 Ω
C = capacitance of the capacitor = 18 μF = 18 x 10⁻⁶ F
L = Inductance of the inductor = 25 mH = 0.025 H
f = frequency = 60 Hz
Capacitive reactance is given as
X = (2πfC)⁻¹
X = (2(3.14) (60) (18 x 10⁻⁶))⁻¹
X = 147.4 Ω
Inductive reactance is given as
X' = 2πfL
X' = 2(3.14) (60) (0.025)
X' = 9.42 Ω
Impedance of the circuit is given as
z = √(R² + (X' - X)²)
z = √(280² + (9.42 - 147.4)²)
z = 59.32 Ω
V
= rms emf of the source
= 240 Volts
rms voltage across the inductor is given as
V' = V z⁻¹ X'
V' = (120) (59.32)⁻¹ (9.42)
V' = 61.8 Volts
To know more about Circuit visit:
https://brainly.com/question/12608491
#SPJ4
Answer the question in the screenshot.
The flow of something like the induced current flow in the above condition is clockwise.
Describe current flow.Current represents the movement of electrons, despite the fact that current & hydrogen flow in the opposite directions. Current flows from positively to negative while electrons travel from negative to positive. Current is the amount of atoms that move through the cross - sectional area of a conductor in a second.
What causes current to flow?Free electrons are transported between atoms by the electromagnetic charges known as voltage. Similar to how water is driven through a conduit, alternating energy needs to be made to flow. Volts are the measure of "electricity pressure," which causes electric current. Actually, electrons would pass the cables here in the opposite way.
To know more about current flow visit:
https://brainly.com/question/28305485
#SPJ1
a car starts from the origin and is driven 1.25 km south, then 8.75 km in a direction 57 degrees north of east. relative to the origin, what is the car’s final location? in degrees.
A automobile travels 1.25 kilometres south after leaving the starting point, and then 8.75 kilometres north of east. What is the vehicle's final position in relation to its starting point?
What is the final speed of a car once it starts?When an automobile begins moving, its starting velocity is zero. A projectile will have a greater starting velocity if it is thrown into the area. The starting velocity will be greater than zero if an automobile stops after pressing the brake, but the end velocity will indeed be zero.
What does displacement measure in?The metre is the Iso System of Units' (SI) accepted unit of displacement (m). In most cases, displacement is measured or described along a single direction.
TO KNOW MORE ABOUT VELOCITY VISIT:
https://brainly.com/question/18084516
SPJ1
By measurement you determine that sound waves are spreading out equally in all directions from a point source and that the intensity is 0.026W/m^2 at a distance of 4.3 m from the source. (a) What is the intensity at a distance of 3.1 m from the source? (b) How much sound energy does the source emit in one hour if its power output remains constant?
a) The intensity at a distance of 3.1 m from the source is 0.00369W/m².
b) 92.8 Ws energy does the source emit in one hour if its power output remains constant.
What is distance ?
Distance is the measure of the space between two points. It can be expressed in a variety of ways, such as kilometers, miles, or even light-years. Distance is an important concept in many areas of mathematics, science, and technology, as it is used to measure the size and/or separation of objects.
a) The intensity of the sound waves at a distance of 3.1 m from the source can be determined using the inverse square law: I = I₀/d²
where I₀ is the initial intensity and d is the distance from the source.
Therefore, the intensity of the sound waves at a distance of 3.1 m from the source is: I = 0.026W/m² / (3.1 m)² = 0.00369W/m²
b) The sound energy emitted by the source in one hour can be calculated using the following equation: E = P × t
where P is the power output of the source and t is the duration of time.
Therefore, the sound energy emitted by the source in one hour is:
E = 0.026 W/m² × 3600 s = 92.8 Ws
To learn more about distance
brainly.com/question/26550516
#SPJ4
Which way does the electric field point around the positive terminal of an alkaline battery?
The electric field points away from the positive terminal's surface is does the electric field point around the positive terminal of an alkaline battery.
What is electric field ?
The electric field is defined mathematically as a vector field that can be associated with each point in space, the force per unit charge exerted on a positive test charge at rest at that point.
The electric field is generated by the electric charge or by time-varying magnetic fields. In the case of atomic scale, the electric field is responsible for the attractive forces between the atomic nucleus and electrons which hold them together.
What is battery ?
An electrochemical oxidation-reduction (redox) reaction is used in batteries to directly transfer the chemical energy found in their active components into electric energy. Electrons are moved from one material to another via an electric circuit in this kind of reaction.
Therefore, the electric field points away from the positive terminal's surface is does the electric field point around the positive terminal of an alkaline battery.
Learn more about electric field from the given link.
https://brainly.com/question/19878202
#SPJ4
The beta decay of cesium-137 has a half-life of 30 years. How many years must pass to reduce a 25 mg sample of cesium 137 to 8.7 mg?
It will take approximately 63.5 years to reduce a 25 mg sample of cesium-137 to 8.7 mg.
Beta decay is a type of radioactive decay in which a beta particle (an electron or a positron) is emitted from the nucleus of an atom. Cesium-137 is a radioactive isotope of cesium that undergoes beta decay and has a half-life of 30 years.
The half-life of a radioactive material is the amount of time it takes for half of the initial amount of the material to decay. In other words, if you start with a certain amount of radioactive material, after 30 years, half of that initial amount will have decayed. After another 30 years, half of the remaining material will have decayed, and so on.
We can use the formula: N(t) = N0 * (1/2)^(t/T1/2) where
N(t) is the number of radioactive nuclei remaining after t yearsN0 is the initial number of radioactive nuclei, t is the time in yearsT1/2 is the half-life of the radioactive material.We know that N0 = 25 mg, T1/2 = 30 years, and we want to find t when N(t) = 8.7 mg.
So we can set up the equation:
8.7 mg = 25 mg * (1/2)^(t/30 years)
Solving for t, we find:
t = (30 years) * log2(8.7mg/25mg)
t = approximately 63.5 years
It will take approximately 63.5 years to reduce a 25 mg sample of cesium-137 to 8.7 mg.
Learn more about beta decay here:
https://brainly.com/question/16952684
#SPJ4
a 1.0-kilogram rubber ball traveling east at 2.0 meters per second hits a wall and bounces back toward the west at 2.0 meters per second. compared to the kinetic energy of the ball before it hits the wall, the kinetic energy of the ball after it bounces off the wall is
The ball has 2.0 Joules of kinetic energy after hitting the wall.
The energy that is moving or doing work is known as an object's kinetic energy. It can be stated using the following formula:
K.E = [tex]\frac{1}{2} mv^2[/tex]
where m is the ball's mass and v is its final velocity following impact.
The rubber ball has a mass of 1.0 kg.
Before the collision, the rubber ball was moving at a speed of 2.0 m/s.
After the collision, the rubber ball's final speed was 2.0 m/s slower.
Following the contact and after it bounces off the wall, the ball's kinetic energy is calculated as follows
K.E = [tex]\frac{1}{2} mv^2[/tex]
K.E = [tex]\frac{1}{2} \times 1 \times (2)^2[/tex]
K.E = 4/2
K.E =2.0 Joules
To learn more about Kinetic energy :
https://brainly.com/question/21023315
#SPJ4
The kinetic energy of the ball after it bounces off the wall is 2.0 Joules.
The kinetic energy of an object is the energy that is in motion or performing work. It can be expressed by using the formula:
[tex]K.E=\frac{1}{2} mv^2[/tex]
The mass of the object(rubber ball) = 1.0 kgThe initial speed of the rubber ball before the collision = 4.0 m/sThe final speed of the rubber ball after the collision = - 2.0 m/sThe Kinetic energy of the ball after the collision and when it bounces off the wall is computed as:
[tex]K.E. =\frac{1}{2} *1.0*(2.0)^2[/tex]
K.E. = 2.0 Joules
In physics, the kinetic strength of an item is the energy that it possesses because of its motion. it's far described as the work needed to boost up a frame of a given mass from rest to its said speed. Having gained this power during its acceleration, the frame continues this kinetic power except for its pace adjustments. An equal quantity of labor is carried out by means of the body when decelerating from its current speed to a country of relaxation. officially, kinetic power is any time period in a gadget's Lagrangian which incorporates a spinoff with respect to time.
Kinetic electricity is the power an object has due to its motion. If we need to boost up an item, then we must observe a force. applying pressure calls for us to do paintings. After paintings have been done, strength has been transferred to the item, and the object may be moving with a brand new constant speed.
To learn more about Kinetic energy visit here:
brainly.com/question/26472013
#SPJ4
You are in the year where the earth has no more land available for houses you decide to build an apartment up and need things to survive in each earths 5 layers (troposphere,stratosphere, mesosphere, thermosphere, exosphere) Question: what things would you need to survive the thermosphere(really hot it is 2000 degrees fahrenheit)
You would need to survive the thermosphere: difficult temperatures, solar radiations, low air pressures and low air density with difficulty in breathing.
What is atmosphere?A layer of gases known as the atmosphere envelops the planet Earth. The gravitational pull of the planet's neighbor, Earth, keeps it close to the surface. The three primary elements of the atmosphere are nitrogen, oxygen, and argon.
The thermosphere, which is located above the mesosphere, is a zone where the temperature rises as you ascend. The sun's powerful UV and X-ray radiation is what is responsible for the temperature rise. The upper thermosphere can reach temperatures of up to 2,000 degrees Celsius.
Learn more about atmosphere here:
https://brainly.com/question/26767532
#SPJ1
Which statement describes an unanticipated impact of a technological advance?
• A. Artificial neural networks have been developed to allow doctors to diagnose patients more quickly and accurately.
• B. The nonnative plant kudzu was brought to the United States in order to curb erosion, but it destroys native plants.
• C. Continued research and development has produced white LED lights that have gradually replaced traditional fluorescent and incandescent bulbs.
• D. The development of antibiotics allowed people to be treated for bacterial infections, but their overuse has led to strains of bacteria that cannot be killed by available antibiotics.
The statement that describes an unanticipated impact of a technological is that the development of antibiotics allowed people to be treated for bacterial infections, but their overuse has led to strains of bacteria that cannot be killed by available antibiotics.
What are antibiotics?An antibiotic is a type of antimicrobial substance active against bacteria which is the most important type of antibacterial agent for fighting bacterial infections, and antibiotic medications are widely used in the treatment and prevention of such infections.
Antibiotics are not effective against viral infections and this includes the common cold, flu, most coughs and sore throats.
Learn more about antibiotic at: https://brainly.com/question/6970037
#SPJ1
A two-slit experiment with red light produces a set of bright fringes. (a) Will the spacing between the fringes increase, decrease, or stay the same if the color of the light is changed to blue? (b) Choose the best explanation from among the following:
I. The spacing between the fringes will increase because blue light has a greater frequency than red light.
II. The fringe spacing decreases because blue light has a shorter wavelength than red light.
III. Only the wave property of light is important in producing the fringes, not the color of the light. Therefore the spacing stays the same
a) The spacing between the fringes will decrease if the color of the light is changed to blue.
b) II. The fringe spacing decreases because blue light has a shorter wavelength than red light.
The two-slit experiment is a fundamental experiment in wave optics that demonstrates the wave-like behavior of light. When a beam of light is shone through two small slits, it produces a diffraction pattern on a screen behind the slits. This pattern consists of a series of bright and dark fringes, which are caused by the interference of the light waves passing through the two slits.
Answer to (a) is that, if the color of the light is changed to blue, the spacing between the fringes will decrease. This is because the spacing between the fringes is inversely proportional to the wavelength of the light, and blue light has a shorter wavelength than red light.
As for the reason behind it, the best explanation is (b) II. The fringe spacing decreases because blue light has a shorter wavelength than red light. The wave property of light is important in producing the fringes, and the color of the light does play a role in the spacing of fringes, which is why the spacing decreases when the color of the light is changed to blue.
Read more about the two-slit experiment :
https://brainly.com/question/29381229
#SPJ4
How far can you move a 10kg object with an acceleration of 3m/s when you use 6 N of
work?
The object can be moved 0.2 meters with the given work and acceleration.
What is work?
We can use the work-energy principle to solve the problem:
work done = change in kinetic energy
The work done on the object is given by:
work done = force x distance x cos(theta)
where theta is the angle between the direction of force and the direction of motion. In this case, theta is not given, so we assume it to be zero (i.e., force is in the same direction as the displacement).
Therefore, we have:
work done = force x distance
Rearranging, we get:
distance = work done / force
Substituting the given values, we get:
distance = 6 N / 10 kg x 3 m/s = 0.2 meters
Therefore, the object can be moved 0.2 meters with the given work and acceleration.
To know more about work, visit:
https://brainly.com/question/31050706
#SPJ1
Complete question is: A 10kg object with an acceleration of 3m/s when you use 6 N of work can be moved 0.2 meter .
A 9.00 kg bomb mass is sitting stationary. The bomb explodes and M1 (3kg) moving to the left with a velocity of
140 ms (v₁). The remaining portion flys to the right. Determine the v2 (velocity) it flys off with
A 9 kg explosive detonates into two fragments, each weighing 3 kg and 6 kg. The kinetic energy of mass 6 kg is 1.92 J, and the velocity of mass 3 kg is 1.6 m/s.
What is meant by velocity?The rate at which an object's position changes as perceived from a particular point of view and as measured by a certain unit of time is determined by its velocity, which can be expressed as, for instance, 60 km/h northbound. Quickness of motion or activity is known as velocity. Speed is a shorter term and a synonym for celerity. The term "velocity" in physics especially refers to the measurement of an object's rate and direction of positional change.The vector quantity velocity (v), denoted by the equation v = Δs/Δt, quantifies displacement (or change in position, s), over change in time (t).Therefore,
The total momentum of the bomb is unchanged before and after the explosion thanks to the conservation of linear momentum.
0 = 3 × 1.6 + 6v
v = 0.8 m/s
Kinetic energy of mass 6 kg is:
1/2 mv² = 1/2 × 6 × 0.8²
= 1.92 J
Hence, the correct option is c) 1.92J
The complete question is:
A bomb of mass 9kg explodes into 2 pieces of mass 3kg and 6kg. The velocity of mass 3kg is 1.6m/s, the kinetic energy of mass 6kg is :
A) 3.84J
B) 9.6J
C) 1.92J
D) 2.92J
To learn more about velocity, refer to:
https://brainly.com/question/80295
#SPJ1
a safety helmet extends the time of impact from 0.005 s to 0.020 s.
The force is reduced by a factor of 4.
In physics, the idea of impulse is crucial, especially when examining collisions and impacts. The impulse of a force causes a change in an object's momentum when it acts on it for a predetermined amount of time. The shift in momentum is greater the stronger the stimulus.
Using the formula to determine force -
I = FΔt
The Δt for the impulse increased from 0.005s to 0.0020s.
Thus,
= 0.0020 / 0.005
= 4
Therefore,
F = I/4Δt
This means that the force is reduced by a factor of four.
Complete Question
A safety helmet extends the time of impact from 0.005 s to 0.020 s. By what factor is the average force that causes the impact reduced?
Read more about force on:
https://brainly.com/question/25239010
#SPJ4
In terms of L. find an expression for the distance xm for which the period is a minimum. Expression : Xm_______________________________
The expression for the distance xm for which the period is a minimum is given by xm = (2πL)/n, where n is an integer greater than or equal to 2.
What does Distance XM mean?
Distance xm refers to a distance measurement in meters. For example, if you see "Distance 500m," this means 500 meters.
Distance xm is also sometimes used to refer to a distance measurement in miles. For example, if you see "Distance 500m," this could mean 500 miles.
What do you mean by Integer and where is it used?
A whole number (not a fraction) that can be positive, negative, or zero is referred to as an integer. Integers include the numbers -5, 0, 1, 5, and 10. In many areas of mathematics, such as counting, measuring, and calculating, integers are used. They're also used in computer programming, where they're known as data types. Temperatures, dates, times, and money are examples of real-world values represented by integers.
To know more about Integer,
https://brainly.com/question/14786702
#SPJ4
Which three characteristics of an object are represented by a motion map?
velocity, length, time
acceleration, time, mass
mass, length, position
position, acceleration, velocity
The three characteristics of an object which are represented by a motion map are the position, acceleration, velocity and is therefore denoted as option D.
What is a Motion map?This is a term which is referred to as a one-dimensional plots built off of a position line and is denoted by a horizontal axis which makes it possible to mark the position of a body or a vehicle at any point in time.
It contains arrows which are specifically used to record its velocity and acceleration and is therefore the reason why option D was chosen as the most appropriate choice.
Read more about Motion map here https://brainly.com/question/10153269
#SPJ1
Answer: option D.
Explanation:
You throw a baseball forward at 10 m/s, and it is in the air for 3 seconds. What distance did you throw the ball?
A.3.3 meters
B.13 meters
C.30 meters
D.10 meters
Answer:
C.30 meters
Explanation:
m = meters
s = seconds
10 m/s = 10 meters/second
3 seconds * 10 meters/second =
3 seconds * 10 meters / 1 second =
3 * 10 meters/1 = ==> cancel the seconds unit
3 * 10 meters = ==> simplify
30 meters
its due rn pls and thank you
The answers include the following:
Earth is currently in a interglacial period - False.Atmospheric composition has remained constant throughout earth's history - FalseClimate has changed naturally over Earth's history - TrueThe increase in carbon dioxide since the year 1860 is similar to past increases - False.What is Climate?
This is referred to as the average weather condition in a given area over a longer period of time and it is dependent on different factors.
Climate has changed naturally over Earth's history as a result of burning of the fossil fuels like coal, oil and gas which is therefore the reason why true was chosen as the correct choice.
Read more about Climate here https://brainly.com/question/1789619
#SPJ1
two premises and a conclusion
The two premises and a conclusion are:
Premise 1: All birds can fly.
Premise 2: Eagles are birds.
Conclusion: Eagles can fly.
Premise 1: All living things need oxygen to survive.
Premise 2: Fish are living things.
Conclusion: Fish need oxygen to survive.
Premise 1: All fruits are high in vitamins.
Premise 2: Apples are fruits.
Conclusion: Apples are high in vitamins.
What are the premise about?These are examples of a logical argument that uses two premises, which are statements or propositions, as the basis for drawing a conclusion.
Therefore, In each example, the conclusion is a logical deduction based on the information provided in the premises. The first one is an example of an argument that uses the generalization and identification, the second one is an example of argument that uses the classification, and the third one is an example of argument that uses the definition.
Learn more about premises from
https://brainly.com/question/29873273
#SPJ1
See full question below
give an example of two premises and a conclusion
A pitcher throws a ball at 90 mph and the catcher stops it in her glove.
A) Is the work done on the ball by the pitcher positive, negative, or zero?
B) Is the work done on the ball by the catcher positive, negative, or zero?
A pitcher throws a ball at 90 mph and the catcher stops it in her glove, the possible for both positive and negative work.
What is work ?
Work is force that is applied over a distance. Driving a car up a hill, drawing down a captive helium balloon, and raising something against Earth's gravitation are some examples of work. Energy takes the form of work in the mechanical world. The joule, which is equal to one newton metre (N m), is the accepted unit of labour.
What is positive work ?
The same work performed on an item is referred to as positive work whenever force and displacement are both moving in a substantially comparable direction. An illustration of this is how a body travelling forward on a horizontal surface interacts with force and displacement.
a.) the work done on the ball by the pitcher is always be positive.
because when the pitcher throws the ball with force F and the ball also moves in the direction of force so the work done will be positive.
B.) The work done on the ball by the catcher will be negative.
because the fielder has to stop the motion of the ball to catch. this means the direction of force is applied against the motion of the ball so the work done will be negative in this case.
Therefore, A pitcher throws a ball at 90 mph and the catcher stops it in her glove, the possible for both positive and negative work.
Learn more about work from the given link.
https://brainly.com/question/1634438
#SPJ4
Suppose an amateur astronomer discovers an asteroid that is moving at a speed of about 8 km/sec. She estimates that it must be about 13.5 AU from the Sun. Based on your graph, does the pattern of planetary speeds and distance support, or fail to support, her estimated distance?
Answer:
about 1.4 billion km or 870 million mi
Explanation:
I don't know for sure
The potential difference between its ends of a 2-meter stick that is parallel to a uniform electric field is 400 V. The magnitude of the electric field is
In order to find the magnitude of the electric field, we can use the equation
E = V / d
where E is the electric field, V is the potential difference, and d is the distance between the two points.
In this case, the potential difference between the ends of the 2-meter stick is 400 V and the distance between the two points is 2 meters. So we can plug in these values into the equation:
E = 400 V / 2 m = 200 V/m
So the magnitude of the electric field is 200 V/m.
The potential difference between its ends of a 2-meter stick that is parallel to a uniform electric field is 400 V. The magnitude of the electric field is 200V/m.
A charged particle placed in a specific location within an electric field experiences an electric force that is measured as the electric field magnitude (E). In terms of volts per meter (V/m), it is the force per unit positive charge (q) at that location.
[tex]E = \frac{V}{d}[/tex]
E = electric field magnitude in volts per meter (V/m),
V = potential difference in volts (V),
d = distance in meters (m)
V=400 V
d=2 m
[tex]E = \frac{400}{2}[/tex]
E = 200 V/m.
To know more about electric field here
brainly.com/question/30544719
#SPJ2
A 32.2 kg child slides down a long slide in a playground. She starts from rest at a height h1 of 24.3 m. When she is partway down the slide, at a height h2 of 7.70 m, she is moving at a speed of 1.60 m/s. Calculate the mechanical energy lost due to friction (as heat, etc...) between h1 and h2.
The mechanical energy lost due to friction between h1 and h2 is 5,323.2 J
What is mechanical energy?Mechanical energy is the sum of the potential energy and kinetic energy possessed by an object due to its motion and position. It is energy that is associated with the motion and position of an object. It is often associated with machines and other moving objects, as their components have energy due to the work done to move them.
The mechanical energy of the child can be calculated using the following equation:
Mechanical Energy = mgh
where m is the mass of the child, g is the acceleration due to gravity, and h is the height.
The initial mechanical energy of the child at h1 is:
E1 = 32.2 kg * 9.81 m/s2 * 24.3 m = 7,722.3 J
The final mechanical energy of the child at h2 is:
E2 = 32.2 kg * 9.81 m/s2 * 7.7 m = 2,399.1 J
Therefore, the mechanical energy lost due to friction between h1 and h2 is: E Lost = 7,722.3 J - 2,399.1 J = 5,323.2 J
To learn more about mechanical energy
https://brainly.com/question/29803154
#SPJ1
What is the component of A?
Express your answer to the nearest integer.
Ax=
Answer:
3
Explanation:
Are you looking just for the x-component of vector A? If so, the answer is:
3
Go from the tip of the vector A arrow straight down to the x axis
The radius of Jupiter is 11 times that of Earth and the free fall
acceleration near its surface is 2.5 times that on earth. If we someday put
a spacecraft in low Jupiter orbit, its orbital speed will be :
a. greater than that for an Earth satellite (Assume low orbit)
b. same as that for an Earth satellite (Assume low orbit)
c. Less than that for an Earth satellite (Assume low orbit)
If we someday put a spacecraft in low Jupiter orbit, its orbital speed will be greater than that for an Earth satellite.
What is orbital speed?The orbital speed of an astronomical body or object in a gravitationally bound system is its speed with respect to the most massive body's center of mass, or the barycenter.
Orbital speed is ≈ √(gR) for low orbit. As the radius of Jupiter is 11 times that of Earth and the free fall acceleration near its surface is 2.5 times that on earth, the orbital speed of a spacecraft in low Jupiter orbit will be greater than that for an Earth satellite.
Learn more about orbital speed here:
https://brainly.com/question/541239
#SPJ1
A combination of series and parallel connections of capacitors is depicted in the figure. Randomized Variables C1=18 HF C2= 6.09 UF C3= 1.85 UF
The combined effect of the capacitor network can be determined by combining the individual capacitances of the capacitors in either a series or parallel configuration.
What is capacitor?A capacitor is an electrical device used to store energy in the form of an electric field. It consists of two metal plates separated by an insulating material (dielectric) and is commonly used in both AC and DC circuits. The ability of a capacitor to store and release energy quickly can be used to regulate the current in a circuit and to filter out unwanted signals. Capacitors can also be used to smooth out voltage spikes and to provide a reserve power source.
When capacitors are combined in series, the total capacitance of the circuit is the reciprocal of the sum of the reciprocals of each capacitor:
1/Ct = 1/C1 + 1/C2 + 1/C3
In this example, the total capacitance of the circuit is 0.41 UF. When capacitors are combined in parallel, the total capacitance of the circuit is the sum of the individual capacitances:
Ct = C1 + C2 + C3
In this example, the total capacitance of the circuit is 25.94 UF. This combination of capacitors can be used in various circuits to reduce the total capacitance of the network. For example, in low-pass filter circuits, the total capacitance of the network is reduced by using a combination of series and parallel connections of capacitors. This reduces the time constant of the circuit, which can be used to adjust the cut-off frequency of the filter. Additionally, this combination of capacitors can be used in power supply circuits to reduce the ripple voltage, which is the alternating current component of the voltage output.
To know more about capacitor click-
https://brainly.com/question/13578522
#SPJ4
11.The coefficients of static and kinetic friction for wood on wood are .5 and .3 respectively.
If a 100 N wooden box is pushed across a horizontal wooden floor with just enough force
to overcome the force of static friction, its acceleration is
a) .2 m/s²
b) .5 m/s²
c) 2 m/s²
d) 5 m/s²
Answer: a).5 m/s2
Explanation:
estimate the length of the unit cell edge, a, from the atomic radius of aluminum (1.43 å).
For the FCC lattice, the relationship between edge length (a) and atom radius (r) is ( 2a) = 4r.
F + V = E + 2, where F is the number of faces, V is the number of vertices, and E is the number of edges, is how Euler's formula is expressed. According to Euler's formula, the number of faces plus the number of vertices minus the number of vertices equals two for many solid shapes. Length: 0.20 to 14.20 meters, trimmed per request of customs. Wall Thickness Requirement: 0.4 mm. Circumscribed Circle Diameter 300 mm, maximum dimensions. Workability: Simple to machine, cut, and weld.
Learn more about radius here-
https://brainly.com/question/9098982
#SPJ4
10. A 6.0 kg block rests on top of a 7.0 kg block, which rests on a horizontal table. a. What is the force (magnitude and direction) exerted by the 7.0 kg block on the 6.0 kg block? b. What is the force (magnitude and direction) exerted by the 6.0 kg block on the 7.0 kg block?
Answer:
Below
Explanation:
The 7 kg block is pushing UP on the 6kg block to keep it from falling
force = ma = 6 kg * 9.81 m/s = 58.9 N
The 6 kg block is pushing DOWN on the 7 kg block with an equal but opposite force 58.9 N