Answer:
Under the reasonable assumption that the brick has more mass than the feather, the brick experiences a greater force of air friction.
Explanation:
Objects at terminal velocity, only under the influence of gravity, have maximized their speed and have an acceleration of zero. Thus, neither object is accelerating.
Recall Newton's second law: [tex]\sum {\vec {F}}=m \vec {a}[/tex]
Since acceleration for each object is zero, the sum of the force acting on each of those objects must also be zero.
Since the only forces acting on the objects are gravity and the force of air friction, in order to zero out, the force of air friction must be equal in magnitude and opposite in direction to the force of gravity.
Recall that near the surface of the earth, [tex]F_{gravity}=mg[/tex], so the Force of Gravity acting on an object is directly proportional to the object's mass. (A similar argument could be made even if this were not taking place on the surface of the earth, so long as the objects were the same distance from the object providing gravitational influence).
If the masses of the objects are different, the object with the greater mass will experience a larger force of gravity, and hence a larger force of air friction at terminal velocity.
Under the reasonable assumption that the brick has more mass than the feather, the brick experiences a greater force of air friction.
if the velocity of an object is v=-5t 30, at what time does it change direction?A. t = 6B. t = 5C. t = 3D. t = 2E. t = 0
The object changes direction at time t = 6 (option A).
The concept of velocity is closely related to acceleration, which is the rate at which an object changes its velocity. If an object is accelerating, its velocity is changing, either in magnitude or direction, or both. Acceleration is also a vector quantity and is typically measured in meters per second squared (m/s^2) or other appropriate units.
To find the time when the object changes direction with a velocity function of v=-5t + 30, you need to find when the velocity equals zero, as this is the point where the object changes direction.
1. Set the velocity function to zero: 0 = -5t + 30
2. Solve for t: 5t = 30
3. Divide both sides by 5: t = 6
So, the object changes direction at time t = 6 (option A).
Learn more about "direction": https://brainly.com/question/3184914
#SPJ11
what is the most commonly effective spin recovery for a straight-wing aircraft
The most commonly effective spin recovery technique for a straight-wing aircraft is the "neutralize controls, reduce power, and apply opposite rudder" method, often abbreviated as "PARE".
This involves first neutralizing the ailerons and elevator to reduce the angle of attack, then reducing the power to minimize the aerodynamic forces contributing to the spin, and finally applying opposite rudder to counteract the yawing motion and stabilize the aircraft.
Once the spin has been arrested, the aircraft can be gradually recovered by slowly increasing power and returning to level flight. It is important for pilots to be trained in spin recovery techniques to maintain safety during flight.
To learn more about straight-wing aircraft refer here:
https://brainly.com/question/29439397#
#SPJ11
A long wire stretches along the x-axis and carries a 3.0 A current to the right (+x). The wire is in a uniform magnetic field →B=(0.20 ^i−0.36 ^j+0.25 ^k)T. Determine the components of the force on the wire per cm of length.
The force per cm of length on the wire is [tex](0.54^i + 0.09^j - 0.60^k) N/cm[/tex].
The force on a current-carrying wire in a magnetic field is given by the formula: →F = I→l × →B
where I is the current in the wire, →l is a vector pointing in the direction of the current, and →B is the magnetic field vector.
In this problem, the wire is stretched along the x-axis, so we can choose →l to be in the +x direction. Thus, →l = (1,0,0).
Substituting the given values into the formula, we get:
→ [tex]F = 3.0 A (1,0,0) \times (0.20^i - 0.36^j + 0.25^k) T[/tex]
Taking the cross product, we get:
→ [tex]F = (0.54^i + 0.09^j - 0.60^k) N/m[/tex]
To get the force per cm of length, we divide by 100, so the final answer is:
→ [tex]F = (0.54^i + 0.09^j - 0.60^k) N/cm[/tex]
To know more about magnetic field , refer here:
https://brainly.com/question/11514007#
#SPJ11
the power factor of a circuit is 0.6 lagging. the power delivered in watts is 400. if the input voltage is 60 v sin(ωt 15°), find the sinusoidal expression for the input current.
The sinusoidal expression for the input current is 4.81 sin(ωt + 107.3°)
.
The power factor (PF) is the cosine of the phase angle between the voltage and current waveforms in an AC circuit. In this case, since the power factor is 0.6 lagging, the angle between the voltage and current waveforms is 53.13° (90° - arccos(0.6)).
To find the sinusoidal expression for the input current, we need to use Ohm's Law, which states that V = IZ, where V is the voltage, I is the current, and Z is the impedance of the circuit. In this case, since we know the power delivered (P) and the input voltage (V), we can use the formula P = VIcosθ to find the impedance.
P = VIcosθ
400 = 60Icos(53.13°)
I = 4.81 A
Therefore, the sinusoidal expression for the input current is I = 4.81 sin(ωt + 107.3°), where ω is the angular frequency (2πf) and t is the time. The phase angle of 107.3° represents the 53.13° phase shift between the voltage and current waveforms.
Learn more about ohms law:
https://brainly.com/question/1247379
#SPJ11
when astronomers say that ganymede is a differentiated body, they mean that it: a. has a northern hemisphere which is different from its southern hemisphere b. has more of the larger crater types than the smaller ones c. has a magnetic field that is not centered on its axis of rotation d. has a heavier core, surrounded by a lighter, icy mantle and crust e. has a color that is surprising among outer solar system satellites
When astronomers say that Ganymede is a differentiated body, they mean that it has a heavier core, surrounded by a lighter, icy mantle and crust. Option D
What is a Ganymede in astronomy?The biggest moon in the solar system, Ganymede is a natural satellite of Jupiter. It was called after the legendary character Ganymede, a cupbearer to the gods, and it was found in 1610 by Galileo Galilei. In many ways, Ganymede is an unusual moon.
It is the only moon in the solar system with a significant atmosphere, and it is the only moon known to have its own magnetic field. In addition, Ganymede is a distinct body with a core, mantle, and crust.
Learn more about astronomy:https://brainly.com/question/5165144
#SPJ4
1) first consider the movement of the hydrogen atom over time. simulate this movement with your two fists, using one to represent the cl atom and the other to represent the h atom.
Hydrogen atom movement can be simulated using fists.
How can the movement of the hydrogen atom be simulated?
When considering the movement of a hydrogen atom over time, it can be simulated using two fists. By using one fist to represent the chlorine (Cl) atom and the other fist to represent the hydrogen (H) atom, we can visualize their interaction and relative positions. This simulation allows us to understand the behavior of the hydrogen atom in the context of chemical reactions and molecular dynamics.
the simulation of hydrogen atom movement and its significance in understanding chemical reactions and molecular dynamics.
Learn more about hydrogen atom
brainly.com/question/30886690
#SPJ11
A sample of charcoal from an archaeological site contains 65.0g of carbon and decays at a rate of 0.887Bq .How old is it? (In years)Please explain all steps cleary.
The age of the charcoal sample can be determined using the decay equation for C-14 and measuring the remaining C-14 atoms compared to the initial amount. However, caution should be exercised regarding assumptions made and potential contamination.
To determine the age of the charcoal sample, we can use the concept of radioactive decay. Carbon-14 (C-14) is a radioactive isotope of carbon that undergoes decay at a known rate. The half-life of C-14 is approximately 5730 years. By measuring the amount of C-14 remaining in the charcoal sample and comparing it to the initial amount, we can calculate its age.
Given that the charcoal sample contains 65.0 grams of carbon and decays at a rate of 0.887 Bq (becquerels), we need to convert the decay rate to a number of carbon atoms. The decay rate of C-14 is measured in disintegrations per second (Bq), which corresponds to the number of C-14 atoms decaying per second.
Knowing that the atomic mass of carbon is approximately 12 g/mol, we can convert the mass of the charcoal to moles of carbon. Then, using Avogadro's number, we can convert moles of carbon to the number of carbon atoms.
Next, we calculate the initial number of C-14 atoms present in the charcoal sample by assuming that the ratio of C-14 to stable carbon (C-12 and C-13) in the atmosphere has remained relatively constant over time. This ratio is about 1 in 1 trillion.
We can then use the decay equation for exponential decay, [tex]N(t) = N_0 \left(\frac{1}{2}\right)^{\frac{t}{t_{1/2}}}[/tex], where N(t) is the remaining number of C-14 atoms, N₀ is the initial number of C-14 atoms, t is the time in years, and [tex]t_{1/2}[/tex] is the half-life of C-14.
Solving the equation for t, we can find the age of the charcoal sample. Plugging in the values, we have [tex]N(t) = N_0 \cdot \left(\frac{1}{2}\right)^{\frac{t}{5730}}[/tex].
Using logarithms, we can rearrange the equation to isolate t: [tex]t = \frac{{5730 \cdot \log\left(\frac{{N_0}}{{N(t)}}\right)}}{{\log(2)}}[/tex].
Substituting the values, we can calculate the age of the charcoal sample. However, we need to be cautious about the assumptions made, such as the constant atmospheric C-14 ratio. Calibration with other dating methods and consideration of potential contamination should also be taken into account to obtain accurate results.
To learn more about charcoal
https://brainly.com/question/3466681
#SPJ4
A flat coil of wire has an inductance of 40.0 mH and a resistance of 5.00 v ?. It is connected to a 22.0-v battery at the instant t = 5.0. Consider the moment when the current is 3.00 A. (a) At what rate is energy being delivered by the battery?__________W (b) What is the power being delivered to the resistance of the coil?_________W (c) At what rate is energy being stored in the magnetic field of the coil?_______w
(a) Energy being delivered by the battery: 66.0 W. (b) Power delivered to the resistance: 9.0 W. (c) Energy being stored in the magnetic field: 57.0 W.
In this scenario, a flat coil of wire with an inductance of 40.0 mH and a resistance of 5.00 Ω is connected to a 22.0 V battery. At t = 5.0, the current in the coil is 3.00 A. (a) The rate at which energy is being delivered by the battery can be calculated using the formula P = IV, where P represents power, I is the current, and V is the voltage. Thus, P = (3.00 A) * (22.0 V) = 66.0 W. (b) The power being delivered to the resistance can be determined using the formula P = I^2R, where R represents resistance. Therefore, P = (3.00 A)^2 * (5.00 Ω) = 9.0 W. (c) The rate at which energy is being stored in the magnetic field of the coil can be calculated by subtracting the power dissipated by the resistance from the power delivered by the battery. Thus, 66.0 W - 9.0 W = 57.0 W. In summary, the battery is delivering energy at a rate of 66.0 W, 9.0 W is being dissipated as power in the resistance, and the remaining 57.0 W is being stored in the magnetic field of the coil.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
. a 12 ft chain weighs 15 lbs and hangs from a ceiling. the work done to lift the lower end so that it is level with the upper end is given by the formula:
The work done to lift the lower end of a 12 ft chain that weighs 15 lbs and is hanging from a ceiling, so that it is level with the upper end is 90 ft-lbs.
To solve this problem, we need to use the formula for the work done on an object:
W = Fd
Where W is the work done, F is the force applied, and d is the distance moved in the direction of the force.
In this case, the force we are applying is the weight of the chain, which is 15 lbs. The distance moved in the direction of the force is the length of the chain, which is 12 ft.
So we can plug these values into the formula:
W = 15 lbs x 12 ft = 180 ft-lbs
However, this answer is not correct because it assumes that we are lifting the entire chain straight up. In reality, we are only lifting the lower end of the chain until it is level with the upper end.
Since the chain is hanging in a curve, we need to lift the lower end by a greater distance than the upper end. The extra distance we need to lift the lower end is equal to the sag in the chain.
The sag in a hanging chain can be calculated using the formula:
S = (wL^2) / (8d)
Where S is the sag, w is the weight per unit length of the chain, L is the length of the chain, and d is the distance between the endpoints of the chain.
For this problem, we can assume that the chain is uniform and has a weight of 1.25 lbs/ft (since 15 lbs / 12 ft = 1.25 lbs/ft). We also know that the endpoints of the chain are 12 ft apart.
So we can plug these values into the sag formula:
S = (1.25 lbs/ft x 12 ft^2) / (8 x 12 ft) = 1.125 ft
This means that we need to lift the lower end of the chain by an extra 1.125 ft compared to the upper end. So the total distance we need to lift the lower end is:
12 ft + 1.125 ft = 13.125 ft
Now we can use the work formula again, using the new distance we need to lift the lower end:
W = 15 lbs x 13.125 ft = 187.5 ft-lbs
However, this answer is still not correct because it assumes that we are lifting the chain straight up. In reality, we are lifting the chain in a curved path.
To find the actual work done, we need to calculate the work done against gravity as we lift each small segment of the chain. This requires calculus, but we can use the result of a previous calculation to simplify the answer.
We found that the sag in the chain is 1.125 ft. This means that the midpoint of the chain is hanging 0.5625 ft below the endpoints. So when we lift the midpoint to level it with the endpoints, we are lifting it a distance of 6.5625 ft (since 12 ft - 0.5625 ft - 0.5625 ft = 10.875 ft, and 6.5625 ft is half of 10.875 ft).
The work done to lift the midpoint is:
W = 1/2 x 15 lbs x 6.5625 ft = 49.21875 ft-lbs
So the total work done to lift the chain is:
W = 187.5 ft-lbs + 49.21875 ft-lbs = 236.71875 ft-lbs
However, we only need to give the answer to one decimal place, so the final answer is:
W = 236.7 ft-lbs (rounded to one decimal place)
learn more about force
https://brainly.com/question/12785175
#SPJ11
Do greenhouse gases impact global temperatures? Use evidence collected from your model to support your answer.
In context to the given question the answer is yes, greenhouse gases provide great impact global temperatures. Climate scientists totally appreciate and agree that increasing levels of carbon dioxide and other greenhouse gases are severely and directly linked to the increasing global temperatures.
Greenhouse gases aids to absorb heat radiating from the Earth’s surface and re-release it in all directions—involving back toward Earth’s surface. The concept of not having carbon dioxide will conclude and make the Earth’s natural greenhouse effect too weak comparatively than before to keep the average global surface temperature above freezing.
The IPCC have predicted and forecasted that greenhouse gas emissions will carry on and lead to increase over the next few decades. The result being severe, they forcasted that the average global temperature will gradually increase by about 0.2 degrees Celsius per decade.
To learn more about greenhouse gases
https://brainly.com/question/19521661
#SPJ1
a simple pendulum of mass m = 2.00 kg and length l = 0.82 m on planet x, where the value of g is unknown, oscillates with a period t = 1.70 s. what is the period if the mass is doubled?
If the mass is doubled, the period of the pendulum would increase to approximately 2.41 seconds.
The formula for the period of a simple pendulum is T = 2π√(l/g), where T is the period, l is the length of the pendulum, and g is the acceleration due to gravity. We can rearrange this formula to solve for g:
g = (4π²l) / T²
Plugging in the given values, we get:
g = (4π² x 0.82 m) / (1.70 s)²
g ≈ 18.6 m/s²
Now, if we double the mass of the pendulum to 4.00 kg, the period can be found using the same formula:
T = 2π√(l/g), where g is the value we just calculated and l is still 0.82 m, but the mass is now 4.00 kg.
T = 2π√(0.82 m / 18.6 m/s²) ≈ 2.41 s
Therefore, the period of the pendulum would increase to approximately 2.41 seconds if the mass is doubled.
More on period: https://brainly.com/question/14153756
#SPJ11
In the absence of air resistance, which of the following best describes the motion of a freely falling object near the surface of the Earth? (Assume the downward direction is positive.)
The velocity increases but the acceleration remains constant as the object falls.
The velocity stays constant but the acceleration increases as the object falls.
The velocity and the acceleration both increase as the object falls.
The velocity and the acceleration both stay constant as the object falls.
The correct option is that both the velocity and the acceleration increase as the object falls.
What is the relationship between the velocity and acceleration of a freely falling object in the absence of air resistance?In the absence of air resistance, the motion of a freely falling object near the surface of the Earth is described by the following: the velocity and the acceleration both increase as the object falls.
This behavior is due to the constant force of gravity acting on the object. As the object falls, the force of gravity causes it to accelerate, meaning its velocity increases over time. Since the acceleration due to gravity near the Earth's surface is approximately constant, the object's acceleration remains the same throughout its fall.
The correct option is that both the velocity and the acceleration increase as the object falls.
Learn more about acceleration
brainly.com/question/2303856
#SPJ11
Three types of voltage indicators/testers discussed in this lesson are ? .Digital multimeter (DMM) type voltage tester , No contact voltage indicator , Solenoid type voltage tester
Yes, that is correct. The three types of voltage indicators/testers discussed in this lesson are:
1. Digital multimeter (DMM) type voltage tester: This type of voltage tester measures the voltage level using a digital multimeter and provides an accurate reading of the voltage level.
It can also measure other electrical properties like resistance and current.
2. No contact voltage indicator: This type of voltage tester detects the presence of voltage without making any physical contact with the electrical circuit or conductor. It typically uses an LED or audible alarm to indicate the presence of voltage.
3. Solenoid type voltage tester: This type of voltage tester uses a solenoid (electromagnet) to detect the presence of voltage. When the solenoid is exposed to voltage, it creates a magnetic field that causes a needle to move, indicating the presence of voltage.
This type of tester is commonly used for testing high-voltage circuits.
To know more about Yes, that is correct. The three types of voltage indicators/testers discussed in this lesson are:
To know more about indicators refer here
https://brainly.com/question/28093573#
#SPJ11
during gait, at the instant of heel strike, the torque created by the grf usually pushes the knee into what kind of position
During gait, at the instant of heel strike, the torque created by the ground reaction force (GRF) usually pushes the knee into a flexed position.
The GRF acts on the foot, creating a torque at the knee joint. This torque typically causes the knee to bend or flex slightly, allowing for shock absorption and preparing the leg for the next phase of the gait cycle, which involves supporting the body weight.
In summary, the torque generated by the GRF at heel strike during gait leads to a flexed knee position, which is crucial for maintaining stability and smooth progression throughout the walking or running motion.
To know more about ground reaction force, click here
https://brainly.com/question/28935195
#SPJ11
To calculate the power consumption in a resistive circuit (P = VI), the voltage and current have been measured and found to be V = 100 +/- 2V I = 10 +/- 0.2A Calculate the maximum possible error and also the best-estimate uncertainty in the computation of the power. Assume that the confidence levels for the uncertainties in V and I are the same
The best estimate uncertainty in the computation of the power is 39.8 W. By assuming that the confidence levels for the uncertainties in V and I are the same.
The maximum possible error in the power can be calculated using the formula
ΔPmax = √[(ΔV/V)^2 + (ΔI/I)^2] * P
Where ΔV/V and ΔI/I are the relative uncertainties in voltage and current respectively.
Given
V = 100 +/- 2V
I = 10 +/- 0.2A
Relative uncertainty in V = ΔV/V = 2/100 = 0.02
Relative uncertainty in I = ΔI/I = 0.2/10 = 0.02
Substituting the values in the formula, we get
ΔPmax = √[[tex]\sqrt{0.02}[/tex] + [tex]\sqrt{0.02}[/tex] ] * 1000 = 56.57 W
Therefore, the maximum possible error in the power calculation is 56.57 W.
The best estimate uncertainty in the computation of the power can be calculated as
ΔP = √[(ΔV/V)^2 + (ΔI/I)^2] * P/[tex]\sqrt{2}[/tex]
Where sqrt(2) is the factor to convert from the standard deviation to the uncertainty at the 68% confidence level.
Substituting the values in the formula, we get
ΔP = √[[tex]\sqrt{0.02}[/tex] + [tex]\sqrt{0.02}[/tex] ]* 1000/[tex]\sqrt{2}[/tex] = 39.8 W
Therefore, the best-estimate uncertainty in the computation of the power is 39.8 W.
To know more about uncertainty here
https://brainly.com/question/17779335
#SPJ4
the circle (x−4)^2 (y−1)^2=4 can be drawn with parametric equations.
Parametric equations: x=4+2cos(t), y=1+2sin(t). These equations represent a circle with center (4,1) and radius 2.
To convert the given equation into parametric form, we can use the standard parametric equation of a circle, x = cx + rcos(t), y = cy + rsin(t), where (cx, cy) is the center of the circle and r is the radius. In this case, the center is (4,1) and the radius is 2, so we substitute these values and simplify to get x = 4 + 2cos(t) and y = 1 + 2sin(t). These equations represent the same circle as the original equation, with each point on the circle given by a corresponding value of t.
Learn more about parametric here :
https://brainly.com/question/31870473
#SPJ11
Question 18 (1 point) Light is made of electrons moving ata velocity of 3x10^8 m/s True False
False. Light is made of photons, which are massless particles that travel at a velocity of 3x10^8 m/s in a vacuum. Electrons, on the other hand, are negatively charged particles
that have mass and do not travel at the speed of light unless they are accelerated to high energies. Light is not made of electrons; it consists of particles called photons.
These photons travel at the speed of light, which is approximately 3x10^8 m/s in a vacuum,Electrons, on the other hand, are negatively charged particles that are part of an atom's structure.\
To know more about vacuum visit:
https://brainly.com/question/755963
#SPJ11
False. Light is not made of electrons moving at a velocity of 3x10^8 m/s.
What is the light?Light is an electromagnetic wave that consists of oscillating electric and magnetic fields. It is not composed of electrons moving at a specific velocity. Instead, the speed of light in a vacuum is a fundamental constant denoted by the symbol "c" and is approximately equal to 3x10^8 m/s.
Electrons, on the other hand, are subatomic particles that carry negative charge and are part of atoms. They can be involved in the generation or interaction with light, but they are not the constituent particles of light itself.
The behavior of light is described by the theory of electromagnetic waves, which encompasses both electric and magnetic fields propagating through space.
The velocity of light in a vacuum, as determined by experimental observations and theoretical models, is a fundamental property of light and not directly related to the velocity of electrons.
Therefore, Incorrect. Light is not composed of electrons moving at a velocity of 3x10^8 m/s.
To know more about electromagnetic wave, refer here:
https://brainly.com/question/29774932#
#SPJ4
An electron is accelerated through some potential difference to a final kinetic energy of 1.55 MeV. Using special relativity, determine the ratio of the electron's speed v to the speed of light c (relativistically) C What value would you obtain for the ratio if instead you used the classical expression for kinetic energy (classically)
The ratio of the electron's speed to the speed of light is 0.999999738 or about 0.999999 c.
We can use the relativistic expression for kinetic energy of a particle to solve the problem. The final kinetic energy of the electron is given as 1.55 MeV.
Using the rest mass of the electron and the speed of light, we can calculate the Lorentz factor (γ) of the electron. Then, we can use the formula for the ratio of the electron's speed to the speed of light in terms of γ to find the required ratio.
The result obtained is approximately 0.999999 c, indicating that the electron is traveling at a speed very close to the speed of light.
However, if we use the classical expression for kinetic energy, we obtain a significantly higher value for the ratio of the electron's speed to the speed of light.
This highlights the importance of considering the effects of special relativity at high speeds and energies. It also emphasizes the limitations of classical mechanics when dealing with particles that approach the speed of light.
For more such questions on electron:
https://brainly.com/question/1255220
#SPJ11
The ratio of the electron's speed to the speed of light is 0.999999738 or about 0.999999 c.
We can use the relativistic expression for kinetic energy of a particle to solve the problem. The final kinetic energy of the electron is given as 1.55 MeV.
Using the rest mass of the electron and the speed of light, we can calculate the Lorentz factor (γ) of the electron. Then, we can use the formula for the ratio of the electron's speed to the speed of light in terms of γ to find the required ratio.
The result obtained is approximately 0.999999 c, indicating that the electron is traveling at a speed very close to the speed of light.
However, if we use the classical expression for kinetic energy, we obtain a significantly higher value for the ratio of the electron's speed to the speed of light.
This highlights the importance of considering the effects of special relativity at high speeds and energies. It also emphasizes the limitations of classical mechanics when dealing with particles that approach the speed of light.
Visit to know more about Electron:-
brainly.com/question/1255220
#SPJ11
Suppose we have a camera with a focal point at (0,0,0) and an image plane of x+z=2.
a. A point that is somewhere in the scene appears at the image location (3/2,3,1/2). If we took a picture using a camera with the same focal point but an image plane of z=1, where would this scene point appear in the image?
b. Suppose the scene point appears at the image location (xy.z), with x+z=2. Suppose we took a picture using a camera with the same focal point but an image plane of z=1. Give a general formula that tells us where this point will appear in the image.
The new image location on the image plane z=1 is (3/4, 3/2, 1). The general formula for the new image location on the image plane z'=1 is (x * (1/(2-z)), y * (1/(2-z)), 1).
a. To find the image location for the new image plane (z=1), we can use similar triangles. The original point is (3/2, 3, 1/2), and the image plane equation is x+z=2. Let the new point be (x', y', 1). We can form the following ratios:
x'/3/2 = 1/(1/2)
y'/3 = 1/(1/2)
Solving for x' and y', we get:
x' = 3/2 * (1/2) = 3/4
y' = 3 * (1/2) = 3/2
So, the new image location on the image plane z=1 is (3/4, 3/2, 1).
b. For a general formula, let the original point be (x, y, z) with x+z=2, and the new image plane be z'=1. Let the new point be (x', y', 1). Using similar triangles, we can form the following ratios:
x'/x = 1/(2-z)
y'/y = 1/(2-z)
Solving for x' and y', we get:
x' = x * (1/(2-z))
y' = y * (1/(2-z))
So, the general formula for the new image location on the image plane z'=1 is (x * (1/(2-z)), y * (1/(2-z)), 1).
More on images: https://brainly.com/question/6314707
#SPJ11
The radii of curvature of the surfaces of a thin converging meniscus lens are R1= 12.0 cm and R2 = 28.0 cm . The index of refraction of the lens material is 1.60.
A) Compute the position and size of the image of an object in the form of an arrow 5.00 mm tall, perpendicular to the lens axis and 45.0 cm to the left of the lens.
B) A second converging lens with the same focal length is placed 3.15 m to the right of the first. Find the position and size of the final image.
C) Is the final image erect or inverted with respect to the original object?
The position and size of the image will be 14.7 cm to the right of the lens and 14.7 mm tall, inverted, and real.
The position and size of the final image will be 3.31 m to the right of the first lens and 33.1 mm tall, inverted, and real.
The final image is inverted with respect to the original object
A) The position and size of the image can be found using the thin lens equation and magnification equation.
The thin lens equation is 1/f = 1/d0 + 1/di, where f is the focal length, d0 is the object distance, and di is the image distance.
The magnification equation is M = -di/d0, where M is the magnification.
First, we need to find the focal length of the lens. Using the lens maker's equation,
1/f = (n - 1)(1/R1 - 1/R2),
where n is the index of refraction, we get
f = 16.8 cm.
Next, using the thin lens equation and substituting the given values, we get
di = 14.7 cm.
Using the magnification equation, we get
M = -2.94.
Therefore, the image is 14.7 cm to the right of the lens and 14.7 mm tall, inverted, and real.
B) To find the position and size of the final image, we can use the lens equation again.
The first lens produces an image 14.7 cm to the right of it. This image acts as the object for the second lens.
Using the lens equation, we get
di = 15.8 cm.
Using the magnification equation, we get
M = -2.24.
Therefore, the final image is
15.8 cm + 3.15 m = 3.31 m
to the right of the first lens and 33.1 mm tall, inverted, and real.
C) The final image is inverted with respect to the original object.
For more such answers on lens equation
https://brainly.com/question/30618134
#SPJ11
if the universe is infinite, then it contains an infinite number of stars. so, why is the night sky dark?" the overlord looks at you like the proverbial cat about to catch the canary...
Answer:
universe is not infinite, its expands its edges infinitely, its speed of expansion is fast but not faster than speed of light. "universe is infinite" was believed by Isaac Newton and Nicolas Copernicus. scientists in this modern days has no evidence regarding of the infinite or finite of the universe
An atomic nucleus suddenly bursts apart (fissions) into two pieces. Piece A, of mass mA, travels off to the left with speed vA. Piece B, of mass mB, travels off to the right with speed vB.(a) Use conservation of momentum to solve for vB in terms of mA, mB, and vA.vB =(b) Use the results of part (a) to show thatKA/KB = mB/mA,
(a) The velocity of piece B (vB) after the fission can be solved in terms of the velocity of piece A (vA), and the masses of the two pieces (mA and mB) using conservation of momentum: vB = (mA/mB) * vA
Conservation of momentum states that the total momentum of a system is conserved if no external forces act on it. In this case, the initial momentum of the system is zero, since the nucleus was at rest before the fission. Therefore, the total momentum of the two pieces after the fission must also be zero.
We can write the total momentum of the system after the fission as:
p = mA * vA - mB * vB
Since the total momentum is zero, we have:
0 = mA * vA - mB * vB
Solving for vB, we get:
vB = (mA/mB) * vA
(b) Using the expression for vB derived in part (a), we can show that the ratio of the kinetic energies of the two pieces after the fission (KA/KB) is equal to the ratio of their masses (mB/mA):
KA/KB = mB * vB² / (mA * vA²)
Substituting the expression for vB from part (a), we get:
KA/KB = mB/mA
The kinetic energy of an object is given by the formula:
K = (1/2) * m * v²
where m is the mass of the object and v is its velocity. Using this formula, we can write the kinetic energy of piece A and piece B after the fission as:
KA = (1/2) * mA * vA²
KB = (1/2) * mB * vB²
Substituting the expression for vB from part (a), we get:
KA/KB = (mA * vA²) / (mB * vB²)
KA/KB = (mA * vA²) / (mB * [(mA/mB) * vA]²)
KA/KB = mB/mA
Therefore, we have shown that the ratio of the kinetic energies of the two pieces after the fission is equal to the ratio of their masses.
learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
explain the differences between the hot air balloon, the rigid hollow sphere and helium balloon
The hot air balloon, the rigid hollow sphere, and the helium balloon are all types of balloons used for various purposes. So it causes the balloon to rise and stay in the air. This type of balloon is commonly used for decoration or as a toy.
A hot air balloon uses heated air to lift the balloon and its passengers into the air. The air inside the balloon is heated by a propane burner, causing it to become less dense than the air outside the balloon. This allows the balloon to rise and stay in the air until the air cools down. On the other hand, a rigid hollow sphere is a type of balloon that is made of a lightweight material, such as aluminum or fiberglass, that is rigid and maintains its shape even when not filled with gas.
This type of balloon is commonly used in scientific experiments and weather research. In summary, the hot air balloon uses heated air, the rigid hollow sphere is a lightweight, rigid balloon, and the helium balloon uses helium gas to lift the balloon. Each type of balloon has its own unique characteristics and uses.
To know more about hollow sphere visit:
https://brainly.com/question/17105482
#SPJ11
light of wavelength λ = 600 nm passes through a diffraction grating with 1000 lines per cm that is a distance l = 2 m from the screen. what is the separation between the slits
Main answer:
The separation between the slits on the diffraction grating is 0.001 cm.
Supporting answer:
The diffraction grating has 1000 lines per cm, which means that there are 1000 slits per cm. The separation between adjacent slits is therefore:
d = 1 cm / 1000 = 0.001 cm
We can use the grating equation to determine the angles at which the light diffracts:
d(sin θ) = mλ
where d is the slit separation, θ is the diffraction angle, m is the order of the diffraction maximum, and λ is the wavelength of the light.
We can rearrange this equation to solve for the diffraction angle:
sin θ = mλ/d
For the first-order maximum, m = 1. Plugging in the given values, we get:
sin θ = (1)(600 nm)/(0.001 cm) = 0.6
Taking the inverse sine of both sides, we get:
θ = sin^(-1)(0.6) = 36.9°
Now that we know the diffraction angle, we can use trigonometry to find the distance between adjacent diffraction maxima on the screen. The distance between adjacent maxima is given by:
y = l*tan(θ)
where y is the distance between adjacent maxima on the screen, and l is the distance between the grating and the screen.
Plugging in the given values, we get:
y = 2 m * tan(36.9°) = 2.6 m
Therefore, the distance between adjacent maxima on the screen is 2.6 m.
It's important to note that diffraction gratings are an important tool for studying the properties of light and other wave phenomena.
Learn more about diffraction and its applications in physics to better understand this concept.
https://brainly.com/question/31979938?referrer=searchResults
#SPJ11
determine the maximum deflection of the simply supported beam. e = 200 gpa and i = 39.9(10-6) m4.
We would need additional information to solve this problem. It is important to note that the maximum deflection of a beam is a function of both the load and the length of the beam, as well as the material properties and moment of inertia.
To determine the maximum deflection of a simply supported beam, we need to use the formula for deflection, which takes into account the load, length, modulus of elasticity, and moment of inertia of the beam. The formula for maximum deflection of a simply supported beam with a uniformly distributed load is given by:
[tex]$$ \delta_{max} = \frac{5wL^4}{384EI} $$[/tex]
where δmax is the maximum deflection, w is the uniformly distributed load, L is the length of the beam, E is the modulus of elasticity of the material, and I is the moment of inertia of the beam.
In this problem, we are given the modulus of elasticity (E = 200 GPa) and moment of inertia (I = 39.9 x 10^-6 m^4) of the beam. However, we are not given the load or the length of the beam, so we cannot calculate the maximum deflection directly.
If we are given a load and length, we can simply substitute these values into the equation above to calculate the maximum deflection. However, without this information, we cannot determine the maximum deflection.
Therefore, we would need additional information to solve this problem. It is important to note that the maximum deflection of a beam is a function of both the load and the length of the beam, as well as the material properties and moment of inertia.
To learn more about maximum deflection refer here:
https://brainly.com/question/30696585
#SPJ11
Complete Question
Determine the maximum deflection of the simply supported beam. E = 200 GPa and I = 39.9 × [tex]10^{-6} m^4[/tex].
Consider an 82-m (diameter), 1.65-MW wind turbine with a rated wind speed of 13 m/s. At what rpm does the roto turn when it operates with a TSR of 4.8 in 13 m/s winds? How many seconds per rotation is that? What is the tip speed of the rotor in those winds (m/s)? What gear ratio is needed to match the rotor speed to an 1800 rpm generator when the wind is blowing at the rated wind speed? What is the efficiency of the complete wind turbine in 13 m/s winds?
The rotor turns at 14.52 rpm, taking 4.13 seconds per rotation, with a tip speed of 62.4 m/s. A gear ratio of 123.91 is needed, and efficiency is unknown without further information.
To find the rpm, we first calculate the rotor's tip speed: Tip Speed = TSR x Wind Speed = 4.8 x 13 = 62.4 m/s. Then, we calculate the rotor's circumference: C = π x Diameter = 3.14 x 82 = 257.68 m. The rotor's rpm is obtained by dividing the tip speed by the circumference and multiplying by 60: Rpm = (62.4/257.68) x 60 = 14.52 rpm.
Time per rotation is 60/rpm = 60/14.52 = 4.13 seconds. For the gear ratio, divide the generator speed by the rotor speed: Gear Ratio = 1800/14.52 = 123.91. The efficiency cannot be determined without further information on the system's losses.
Learn more about gear ratio here:
https://brainly.com/question/10279521
#SPJ11
1. If the Fed wants to lower the federal funds rate, it shoulda. sell government securities in the open marketb. increase the reserve ratioc. increase the discount rated. buy government securities in the open market
If the Fed wants to lower the federal funds rate, it should buy government securities in the open market. This will increase the amount of money available in the banking system, leading to a decrease in the federal funds rate.
Selling government securities in the open market would have the opposite effect and raise the federal funds rate. Increasing the reserve ratio would require banks to hold more reserves and would also raise the federal funds rate. Increasing the discount rate would make borrowing from the Fed more expensive, which could indirectly increase the federal funds rate.
If the Fed wants to lower the federal funds rate, it should d. buy government securities in the open market.
By purchasing government securities, the Fed increases the supply of money in the economy. This results in a lower federal funds rate as banks have more funds available for lending, leading to increased demand for loans and lower borrowing costs.
To know more about Federal visit:
https://brainly.com/question/8305583
#SPJ11
The solubility product for Cul(s) is 1.1 x 10-12. Calculate the value of Eº for the half- reaction Cul+e+Cu+I The reduction potential for the metal cation is, Cut + e --Cu E° = 0.52 V E°Cul V
The value of Eº for the half-reaction Cu + e⁻ ⟶ Cul is 0.52 V.
The solubility product (Ksp) of Cul(s) is given by the equation: Ksp = [Cu⁺][I⁻], where [Cu⁺] is the concentration of Cu⁺ ions in solution and [I⁻] is the concentration of I⁻ ions in solution.
At equilibrium, the concentration of Cu⁺ ions is equal to the concentration of I⁻ ions. Therefore, we can write: Ksp = [Cu⁺][Cu⁺] = [Cu⁺]². Substituting the given value of Ksp, we get: 1.1 x 10⁻¹² = [Cu⁺]²
Solving for [Cu⁺], we get:
[Cu⁺] = sqrt(Ksp)
[Cu⁺] = sqrt(1.1 x 10⁻¹²)
[Cu⁺] = 1.05 x 10⁻⁶ M
The half-reaction for the reduction of Cu²⁺ to Cu⁺ is: Cu²⁺ + e⁻ ⟶ Cu⁺
The standard reduction potential for this half-reaction is given as E° = 0.52 V. The standard reduction potential for this half-reaction can be calculated using the Nernst equation: E = E° - (RT/nF)*ln(Q)
At equilibrium, Q = [Cu⁺]/[I⁻] = (1.05 x 10⁻⁶)/(1.05 x 10⁻⁶) = 1
Substituting the values into the Nernst equation, we get:
E = 0.52 - (8.314*298/(1*96485))*ln(1)
E = 0.52 V .
To know more about Nernst equation, refer here:
https://brainly.com/question/13043546#
#SPJ11
a particle's acceleration is described by the function ax =(10 −t)m/s2, where t is in s. its initial conditions are x0 = 200 m and v0x =0m/s at t =0s.what is the particle's position at that time?
The particle's position at t = 0s is given by its initial position x0. In this case, x0 = 200m. Therefore, the particle's position at that time is 200 meters.
To determine the particle's position at t=0s, we need to integrate the acceleration function with respect to time to get the particle's velocity as a function of time, and then integrate the velocity function with respect to time to get the particle's position as a function of time.
First, we integrate the acceleration function:
∫ax dt = ∫(10-t) dt
= 10t - 1/2t^2 + C
Where C is the constant of integration. Since the initial velocity is 0 m/s, we know that the constant of integration is 0:
∫ax dt = 10t - 1/2t^2
Next, we integrate the velocity function:
vx = ∫ax dt
= 10t - 1/2t^2 + C
Where C is the constant of integration. Since the initial position is 200 m, we know that the constant of integration is 200:
vx = 10t - 1/2t^2 + 200
Finally, we can evaluate the velocity function at t=0s to get the particle's position at that time:
x = vx(0) = 10(0) - 1/2(0)^2 + 200
= 200 m
Therefore, the particle's position at t=0s is 200 m.
To know more about particle's visit :-
https://brainly.com/question/29239591
#SPJ11
what are subatomic particles with a positive charge called
Subatomic particles with a positive charge are called protons. Protons are found in the nucleus of an atom and have a charge of +1.
The number of protons in an atom determines its atomic number, which in turn determines its chemical properties and its position on the periodic table. The mass of a proton is approximately 1 atomic mass unit (amu). Protons are important in chemical reactions, as they play a role in determining the overall charge of an atom or molecule. In addition, the repulsion between positively charged protons in the nucleus is counteracted by the strong nuclear force, which holds the nucleus together.
Learn more about Subatomic particles here;
https://brainly.com/question/13392184
#SPJ11
Protons are the subatomic particles that carry a positive charge. They are found in the nucleus of an atom along with neutrons. The positive charge of protons is balanced by the negative charge of electrons.
Explanation:Subatomic particles that carry a positive charge are called protons. They are one of the three main types of particles that make up atoms, along with neutrons (which have no charge) and electrons (which have a negative charge). In the nucleus of an atom, you'll find the protons and neutrons, while electrons orbit the nucleus in what are known as energy levels. A proton's positive charge is balanced by an electron's negative charge, leading to a net charge of zero for an atom that has an equal number of protons and electrons.
Learn more about Protons here:https://brainly.com/question/34680285
#SPJ11