(a) calculate the buoyant force on a 2.20 liter helium balloon.

i) The static sensitivity at 283K is approximately -0.0926g^2.

ii) The static sensitivity at 350K is approximately -0.0576g^2.

A thermistor's static sensitivity is defined as the change in resistance per unit change in temperature. It can be stated mathematically as follows:

S = dR/dT

Given the thermistor calibration curve, we have:

0.5e(-inTg2) = R(T).

Taking the derivative with respect to T, we obtain:

dR/dT = -0.5 inTg2 e(-inTg2).

(i) We have the following at 283K:

-0.5in(283)g2 e(-in(283)g2) S = dR/dT

S ≈ -0.0926g^2

At 283K, the static sensitivity is roughly -0.0926g2.

(ii) We have the following at 350K:

[tex]-0.5in(350)g2 e(-in(350)g2) S = dR/dT[/tex]

S ≈ -0.0576g^2

At 350K, the static sensitivity is roughly -0.0576g2.

As a result, as the temperature rises, the thermistor's static sensitivity diminishes.

For such more question on static:

https://brainly.com/question/13680415

#SPJ11

The average binding energy per nucleon for Chromium-52 is 2.61 MeV/nucleon.

The average binding energy per nucleon can be calculated using the formula:

Average binding energy per nucleon = (Total binding energy of the nucleus) / (Number of nucleons)

To calculate the total binding energy of the Chromium-52 nucleus, we can use the mass-energy equivalence formula:

E = mc²

where E is energy, m is mass, and c is the speed of light.

The mass of a Chromium-52 nucleus is:

51.940509 u x 1.66054 x 10⁻²⁷ kg/u = 8.607 x 10⁻²⁶ kg

The mass of its constituent nucleons (protons and neutrons) can be found using the atomic mass unit (u) conversion factor:

1 u = 1.66054 x 10⁻²⁷ kg

The number of nucleons in the nucleus is:

52 (since Chromium-52 has 24 protons and 28 neutrons)

The total binding energy of the nucleus can be calculated by subtracting the mass of its constituent nucleons from its actual mass, and then multiplying by c²:

Δm = (mass of nucleus) - (mass of constituent nucleons)
Δm = 51.940509 u x 1.66054 x 10⁻²⁷ kg/u - (24 x 1.007276 u + 28 x 1.008665 u) x 1.66054 x 10⁻²⁷ kg/u
Δm = 2.413 x 10⁻²⁸ kg

E = Δm x c²
E = 2.413 x 10⁻²⁸ kg x (2.998 x 10⁸ m/s)²
E = 2.171 x 10⁻¹¹ J

To convert this energy into MeV (mega-electron volts), we can use the conversion factor:

1 MeV = 1.60218 x 10⁻¹³ J
²⁶
Total binding energy of Chromium-52 nucleus = 2.171 x 10⁻¹¹ J
Total binding energy of Chromium-52 nucleus in MeV = (2.171 x 10⁻¹¹ J) / (1.60218 x 10⁻¹³ J/MeV) = 135.7 MeV

Now we can calculate the average binding energy per nucleon:

Average binding energy per nucleon = (Total binding energy of the nucleus) / (Number of nucleons)
Average binding energy per nucleon = 135.7 MeV / 52 nucleons
Average binding energy per nucleon = 2.61 MeV/nucleon

Therefore, the average binding energy per nucleon for Chromium-52 is 2.61 MeV/nucleon.

To know more about binding energy, refer

https://brainly.com/question/23020604

#SPJ11

The index of refraction of the substance is approximately 1.50.

The index of refraction of a substance can be determined by measuring its critical angle for total internal reflection.

In this case, the substance has a critical angle of 61.2° when submerged in water with an index of refraction of 1.333. To find the refractive index of the substance,

we can use the formula:

sin(critical angle) = 1 / refractive index of the substance

Rearranging the formula, we get:

refractive index of the substance = 1 / sin(critical angle)

Plugging in the given value of the critical angle (61.2°) into the formula, we find:

refractive index of the substance = 1 / sin(61.2°) ≈ 1.50

Therefore, the index of refraction of the substance is approximately 1.50.

Therefore, the critical angle for total internal reflection of the substance when it is in air is approximately 41.81

Learn more about critical angle

brainly.com/question/30002645

#SPJ11

Thus, the ratio f2/f1 is approximately 3.46.

The fundamental frequency of a vibrating string is given by the formula:
f = (1/2L) * sqrt(T/μ),
where f is the fundamental frequency, L is the length of the string, T is the tension force, and μ is the linear mass density of the string (mass/length).
Let's find μ first for the initial situation:
mass = 3.8 g = 0.0038 kg
length1 = 1.6 m
μ = mass/length1 = 0.0038 kg / 1.6 m = 0.002375 kg/m
Now we can find f1:
T1 = 53 N
f1 = (1/(2 * 1.6 m)) * sqrt(53 N / 0.002375 kg/m) ≈ 9.76 Hz
For the second situation:
length2 = 3.52 m
T2 = 2014 N
f2 = (1/(2 * 3.52 m)) * sqrt(2014 N / 0.002375 kg/m) ≈ 33.76 Hz
Now, we can find the ratio f2/f1:
f2/f1 = 33.76 Hz / 9.76 Hz ≈ 3.46

To know more about mass visit:

https://brainly.com/question/13191643
#SPJ11

To apply this formula to the given values, we first need to convert the direction angle from degrees to radians, which is done by multiplying it by π/180. So, 306.7° * π/180 = 5.357 radians.

we used the formula for the component form of a vector to find the answer to the given question. This formula involves multiplying the magnitude of the vector by the cosine and sine of its direction angle converted to radians, respectively. After plugging in the given values and simplifying, we arrived at the component form (-175.5, 182.9) for the vector v.

To find the component form of a vector given its magnitude and direction angle, we use the following formulas ,v_x = |v| * cosθ ,v_y = |v| * sin(θ) where |v| is the magnitude, θ is the direction angle, and v_x and v_y are the x and y components of the vector.  Convert the direction angle to radians. θ = 306.7° * (π/180) ≈ 5.35 radians Calculate the x-component (v_x). v_x = |v| * cos(θ) ≈ 184.1 * cos(5.35) ≈ -97.1  Calculate the y-component (v_y).
v_y = |v| * sin(θ) ≈ 184.1 * sin(5.35) ≈ 162.5.

To know more about direction visit :

https://brainly.com/question/13899230

#SPJ11

The electron gained 10 eV of kinetic energy.

When an electron moves from a lower potential energy level to a higher one, it gains kinetic energy.

The potential difference or voltage between the two levels determines the amount of kinetic energy gained by the electron.

In this case, the electron moved from 5 V to 15 V, meaning that the potential difference or voltage was 10 V.

The kinetic energy gained by the electron is therefore given by the equation: KE = qV, where q is the charge of the electron and V is the potential difference.

Substituting the values, we get KE = (1.6 x 10^-19 C) x 10 V = 1.6 x 10^-18 J or 10 eV.

Therefore, the electron gained 10 eV of kinetic energy.

For more such questions on kinetic energy, click on:

https://brainly.com/question/8101588

#SPJ11

To calculate the kinetic energy gained by an electron moving from 5V to 15V, we need to use the formula for kinetic energy: KE = (1/2)m[tex]v^{2}[/tex], where m is the mass of the electron and v is its velocity.

Since we are only given the change in potential energy (from 5V to 15V), we need to use the formula for potential energy: PE = qV, where q is the charge of the electron and V is the potential difference. The charge of an electron is -1.6 x [tex]10^{-19}[/tex] Coulombs. Therefore, the potential energy gained by the electron is PE = (-1.6 x [tex]10^{-19}[/tex] C) x (15V - 5V) = -1.6 x [tex]10^{-19}[/tex] J. To convert this potential energy into kinetic energy, we use the formula: KE = PE. Therefore, the electron gained -1.6 x [tex]10^{-19}[/tex] J of kinetic energy. However, this answer is in joules, not electron volts (eV), which is a more commonly used unit for measuring energy in the context of atomic and molecular systems. To convert joules to electron volts, we use the conversion factor: 1 eV = 1.6 x [tex]10^{-19}[/tex] J. Therefore, the electron gained: -1.6 x 1 [tex]10^{-19}[/tex] J / (1.6 x [tex]10^{-19}[/tex] J/eV) = -1 eV. Since energy cannot be negative, we can conclude that the electron gained 1 eV of kinetic energy as it moved from 5V to 15V. Therefore, the correct answer is O 1 eV.

Learn more about potential energy here :

https://brainly.com/question/24284560

#SPJ11

Answer:

DNA POLYMERASE

Explanation:

For the spring system:

a. The spring constant can be calculated using Hooke's Law, which is represented as F = kx,

where k = spring constant. In this case, the weight of the 2kg mass is providing the force to extend the spring.

Given that the weight of the mass, w = mg = 2kg × 9.8 m/s² = 19.6 N (force), and the extension of the spring, x = 15 cm = 0.15 m, rearrange the equation to solve for k.

k = F / x = 19.6 N / 0.15 m = 130.67 N/m.

b. The frequency of oscillation for a mass-spring system undergoing simple harmonic motion can be calculated using the formula f = 1/(2π) × √(k/m),

where f = frequency, k = spring constant, and m = mass.

Substituting the given values:

f = 1/(2π) × √(130.67 N/m / 2 kg) = 0.52 Hz.

c. The displacement of a mass undergoing simple harmonic motion is described by the equation x = A × cos(2πf × t + Ф),

where A = amplitude, f = frequency, t = time, and Ф = phase angle.

Here, A = 15 cm = 0.15 m (additional stretch from the equilibrium position), f = 0.52 Hz (from part b), t = 2 s, and because the object was released from its maximum displacement, the phase angle Ф = 0.

x = 0.15 m × cos(2π0.52 Hz × 2 s + 0) = -0.15 m. This means that at t = 2s, the object will be 15cm above the equilibrium position (since x is negative).

d. Given that the new frequency is half the initial frequency, write f_new = f_old / 2 = 0.52 Hz / 2 = 0.26 Hz. Use the formula for the frequency of oscillation, f = 1/(2π) × √(k/m),

where now m = total mass (2 kg + m_unknown).

Rearranging this formula to solve for m_unknown and substituting the known values:

m_unknown = k / (4π² × f_new²) - 2 kg = 130.67 N/m / (4π² × (0.26 Hz)²) - 2 kg = 4 kg. So the unknown mass added was 4 kg.

Find out more on spring constant here: https://brainly.com/question/1968517

#SPJ1

At the bottom of the incline, the sphere has a translational velocity of 6.32 m/s and a rotational velocity of 42.13 rad/s, and the total energy is split between kinetic and rotational energy with KE = 37.58 J and RE = 21.28 J.

The motion of the sphere can be analyzed by considering its potential energy (PE), kinetic energy (KE), and rotational energy (RE).

At the top of the incline, all of the energy is in the form of potential energy:

PE = mgh

where

m is the mass of the sphere,

g is the acceleration due to gravity (9.81 m/s^2), and

h is the height of the incline.

The height can be calculated as follows:

h = sin(35°) x 7.0 m

  = 4.0 m

PE = (1.5 kg)(9.81 m/s²)(4.0 m)

    = 58.86 J

As the sphere rolls down the incline, its potential energy is converted to kinetic energy and rotational energy.

The kinetic energy can be calculated using the translational velocity of the sphere:

[tex]KE = (1/2)mv^2[/tex]

where

v is the velocity of the sphere.

The velocity can be calculated using the conservation of energy principle, which states that the total energy (PE + KE + RE) remains constant:

PE = KE + RE

At the bottom of the incline, all of the potential energy has been converted to kinetic energy and rotational energy, so the total energy is:

PE = 0

KE + RE = 58.86 J

The translational velocity of the sphere can be calculated from the KE as follows:

[tex]KE = (1/2)mv^2[/tex]

[tex]v = \sqrt{(2KE/m)[/tex]

[tex]v = \sqrt{(2(58.86 J)/(1.5 kg))[/tex]

  = 6.32 m/s

The rotational energy of the sphere can be calculated using its moment of inertia:

[tex]RE = (1/2)Iw^2[/tex]

where

I is the moment of inertia of the sphere,

w is its angular velocity, and

RE is its rotational energy.

The moment of inertia of a solid sphere is given by

[tex]I = (2/5)mr^2[/tex]

[tex]I = (2/5)(1.5 kg)(0.15 m)^2[/tex]

 = 0.0225 kg*m²

Since the sphere is rolling without slipping, the translational velocity of the sphere is related to its angular velocity by:

v = rw

where

r is the radius of the sphere.

Solving for w:

w = v/r

  = (6.32 m/s)/(0.15 m)

  = 42.13 rad/s

The rotational energy of the sphere can now be calculated:

[tex]RE = (1/2)Iw^2[/tex]

     [tex]= (1/2)(0.0225 kg*m^2)(42.13 rad/s)^2[/tex]

     = 21.28 J

Therefore, at the bottom of the incline, the sphere has a translational velocity of 6.32 m/s and a rotational velocity of 42.13 rad/s, and the total energy is split between kinetic and rotational energy with KE = 37.58 J and RE = 21.28 J.

To know more about rotational velocity refer here

brainly.com/question/26095104#

#SPJ11

The given statement "Nuclear fusion is a potential source of cheap, clean energy; room-temperature fusion was achieved nearly ten years ago" is False

While nuclear fusion has the potential to be a source of cheap, clean

energy, and scientists have been working on achieving room-

temperature fusion for many years, it has not yet been achieved.

As of my knowledge cutoff date of 2021, scientists had not yet achieved

room-temperature nuclear fusion.

There have been various experimental breakthroughs in nuclear fusion,

including the achievement of high-temperature fusion in large

experimental reactors, but achieving practical nuclear fusion for use as

an energy source is still a significant technical challenge.

To know more about nuclear fussion refer here

https://brainly.com/question/215894#

#SPJ11

The time between meridian crossings of the Moon for a person standing on Earth is approximately 24 hours and 50 minutes. This is known as the lunar day, and it's slightly longer than the solar day due to the Moon's orbit around Earth combined with Earth's rotation.

When the moon crosses the observer's meridian, it is at its highest point in the sky and appears to be due south (for someone in the Northern Hemisphere). The next time the moon will cross the meridian is after it has moved 13 degrees (one day's worth of motion) to the east. However, during that time, the earth has also rotated by 15 degrees, which means that the observer must wait for an additional 45 minutes (15 degrees ÷ 360 degrees x 24 hours) for the moon to cross the meridian again.

Therefore, the estimated time between meridian crossings of the moon for a person standing on earth is approximately 24 hours and 45 minutes (one day plus 45 minutes). However, this is just an estimate, and the actual time may vary slightly due to factors such as the elliptical shape of the moon's orbit and the tilt of the earth's axis.

To know more about meridian crossings visit:-

https://brainly.com/question/30889240

#SPJ11

The answer cannot be provided in one row without knowing the radius of the disk or additional information about its geometry

To determine the angular velocity of the disk after 3 seconds, we need to consider the conservation of angular momentum. Since the cord is wrapped around the outer surface of the disk, it provides a torque that causes the disk to rotate.

The equation for angular momentum is:

L =[tex]I * ω[/tex]

Where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

In this case, the cord exerts a torque on the disk, causing it to rotate. The torque can be calculated as the tension in the cord multiplied by the radius of the disk:

τ =[tex]T * r[/tex]

Since the disk is released from rest, the initial angular velocity (ω_initial) is 0. We can then relate the initial and final angular momenta as follows:

L_initial =[tex]I * ω_[/tex]initial = 0

L_final =[tex]I * ω[/tex]_final

Since the torque acting on the disk is constant, we can use the formula for torque and angular acceleration to relate the torque and angular momentum:

τ =[tex]I * α[/tex]

Since the disk is released from rest, the angular acceleration (α) is constant. Therefore, we can write:

[tex]τ = I * α = I * (ω_final - ω_initial) / t[/tex]

Simplifying the equation:

[tex]τ = I * α = I * ω_final / t[/tex]

Rearranging the equation to solve for ω_final:

ω_final = (τ * t) / I

Now we can substitute the known values into the equation to calculate the angular velocity (ω_final) after 3 seconds.

Given:

Mass of the disk (m) = 3 kg

Radius of the disk (r) = ? (not provided)

Time (t) = 3 seconds

To calculate the moment of inertia (I), we need to know the radius of the disk. Since it's not provided, we cannot determine the exact angular velocity. However, we can discuss the possible options based on the given choices:

omega = 138.9 rad/s

omega = 163.3 rad/s

omega = 245.0 rad/s

omega = 490.0 rad/s

Without knowing the radius, we cannot determine the correct angular velocity. The moment of inertia depends on the distribution of mass around the axis of rotation, which is directly related to the radius of the disk.

To find the correct angular velocity, we would need the radius of the disk or additional information about the disk's geometry.

Learn more about radius

brainly.com/question/24051825

#SPJ11

If the object's moment of inertia increases by a factor of 2 without the application of an external torque, its angular velocity will decrease by a factor of 2.

This is due to the law of conservation of angular momentum, which states that the total angular momentum of an isolated system remains constant unless acted upon by an external torque.

Since no external torque is applied, the object's initial angular momentum must be conserved. Therefore, the product of its moment of inertia and angular velocity must remain constant.

If the moment of inertia doubles, the angular velocity must halve to maintain the same angular momentum.

So the object's new angular velocity will be half of its original angular velocity, or omega/2.

Read more about Angular velocity.

https://brainly.com/question/30237820

#SPJ11

The atomic mass units of muon which has a mass of 106 MeV/c2 is approximately: 0.113 atomic mass units (amu).

To convert the mass of a muon from MeV/c² to atomic mass units, we need to use the relationship between mass and energy expressed by Einstein's famous equation, E=mc².

We can rearrange this equation to solve for mass, which gives us m=E/c².

First, we convert the mass of the muon from MeV/c² to kg using the conversion factor 1 MeV/c² = 1.78 x 10^-30 kg, which gives us:
m = 106 MeV/c² x (1.78 x 10^-30 kg/MeV/c²) = 1.89 x 10^-28 kg

Next, we can convert the mass in kg to atomic mass units (amu) using the conversion factor 1 amu = 1.66 x 10^-27 kg:
m = (1.89 x 10^-28 kg) / (1.66 x 10^-27 kg/amu) = 0.113 amu

Therefore, the mass of a muon is approximately 0.113 atomic mass units.

To know more about "Einstein's famous equation" refer here:

https://brainly.com/question/10809666#

#SPJ11

The electrical signal is the representation or encoding of the acoustic waveform. It carries the information from the acoustic waveform and allows it to be transmitted.

In simple terms, an acoustic waveform is the physical representation of sound waves in the air. It is the pattern of compressions and rarefactions that we perceive as sound. However, electronic devices such as microphones, speakers, and audio recording systems work with electrical signals. These devices convert the acoustic waveform into an electrical signal to process and transmit it.

The electrical signal is created by transducers like microphones, which convert the sound waves into electrical voltages. These voltages represent the varying amplitude and frequency of the acoustic waveform. The electrical signal carries this information and can be amplified, manipulated, stored, and transmitted using electronic circuitry.

Once the electrical signal reaches a speaker or headphones, it is converted back into an acoustic waveform. The speaker's diaphragm vibrates in response to the electrical signal, recreating the original sound waves, and we hear the sound.

In summary, the electrical signal serves as the intermediary between the acoustic waveform and electronic devices, enabling the processing, transmission, and reproduction of sound.

learn more about electrical here:

https://brainly.com/question/31173598

#SPJ11

The estimated power output of the Sun is approximately 3.828 × 10²⁶ watts.

The power output of the Sun cannot be directly calculated using only the intensity of sunlight reaching Earth (1360 W/m²). However, you can estimate the Sun's total power output, known as its luminosity, with additional information and by applying the inverse square law.

The intensity of sunlight (1360 W/m²) represents the amount of solar energy received per square meter at the Earth's surface. This value is also known as the solar constant. To estimate the Sun's power output, we need to know the distance between the Sun and Earth, which is approximately 150 million kilometers (1 astronomical unit).

Using the inverse square law, which states that the intensity of light is inversely proportional to the square of the distance from the source, we can calculate the total power output (luminosity) of the Sun. The formula is:

Luminosity = Intensity × 4 × π × (distance)²

Plugging in the values, we get:

Luminosity ≈ 1360 W/m² × 4 × π × (150,000,000,000 m)² ≈ 3.828 × 10²⁶ watts
To know about the luminosity, click here;

https://brainly.com/question/31183368

#SPJ11

The slope of a stream bed measured at a specific point along its course represents the rate of change in elevation per unit distance, indicating the steepness or gradient of the stream at that location.

The slope of a stream bed, also known as the stream gradient, is a measure of the steepness of the stream at a specific point along its course. It represents the rate of change in elevation per unit distance. To calculate the stream slope, the change in elevation between two points is divided by the horizontal distance between them. A steeper slope indicates a greater drop in elevation over a shorter distance, indicating a faster-moving stream. Slope influences the speed of water flow, erosion patterns, and the formation of features like waterfalls and rapids. Stream gradients vary throughout a stream's course, with steeper slopes often occurring in the upper reaches and gentler slopes in the lower reaches.

Learn more about stream bed here:

https://brainly.com/question/31792862

#SPJ11

The required gap δ is approximately 6.936 mm so the rails just touch one another when the temperature is increased from t1 = -14 ∘f to t2 = 90 ∘f.

The required gap δ can be determined by using the formula: δ = αL(t2 - t1), where α is the coefficient of linear expansion, L is the length of the rails, and t1 and t2 are the initial and final temperatures, respectively.

When the temperature increases from t1 = -14 ∘f to t2 = 90 ∘f, the change in temperature is Δt = t2 - t1 = 90 - (-14) = 104 ∘f. To find the coefficient of linear expansion α, we need to know the material of the rails.

Assuming the rails are made of steel, the coefficient of linear expansion is α = 1.2 x 10^-5 / ∘C. Converting the temperature difference to ∘C, we have Δt = 57.8 ∘C.

The length of the rails is not given, so let's assume it is 10 meters. Using the formula, we can now calculate the required gap:

δ = αLΔt = (1.2 x 10^-5 / ∘C) x (10 m) x (57.8 ∘C) = 6.936 mm

To know more about linear expansion, click here;

https://brainly.com/question/14780533

#SPJ11

True.The phenomenon described in your question is known as the photoelectric effect. This effect was first explained by Albert Einstein, who proposed that light consists of discrete packets of energy called photons.

When these photons strike a metal surface, they can transfer their energy to electrons in the metal, causing them to be ejected from the surface.
However, not all photons are capable of causing this effect. The frequency of the photons must be above a certain minimum value, known as the threshold frequency, in order to overcome the binding energy of the electrons in the metal and cause them to be ejected. This threshold frequency depends on the specific metal being used.

If the frequency of the incident photons is below the threshold frequency, no electrons will be ejected from the metal, regardless of how many photons strike the surface. Conversely, if the frequency is above the threshold frequency, the number of electrons ejected will increase with increasing photon intensity.

This effect has important applications in fields such as solar energy and photovoltaics, where it is used to convert light energy into electrical energy. By selecting materials with the appropriate threshold frequencies, it is possible to optimize the efficiency of these devices and increase the amount of energy that can be harvested from sunlight. True is the correct answer.

For more such questions on photoelectric effect

https://brainly.com/question/1359033

#SPJ11

The minimum frequency required to eject electrons from a metal is called the threshold frequency. True.

Photons with a frequency lower than the threshold frequency do not have enough energy to eject electrons. Only photons with a frequency greater than or equal to the threshold frequency can eject electrons from a metal.
True, the frequency of the photons must be larger than a certain minimum value in order to eject electrons from the metal. This minimum frequency is called the threshold frequency. Only when photons have a frequency higher than the threshold frequency, they possess enough energy to eject electrons from the metal surface. This phenomenon is known as the photoelectric effect.

Visit here to learn more about threshold frequency:

brainly.com/question/2499414

#SPJ11

Since the magnetic field is into the page (as indicated by the dots), and the current is from A to B, the force on section BC will be perpendicular to and out of the page, which is option B.

To determine the direction of the force acting on section BC of the coil, we need to use the right-hand rule for magnetic fields.

With the fingers of your right hand pointing in the direction of the current (from A to B), curl your fingers towards the direction of the magnetic field (from north to south) and your thumb will point in the direction of the force on section BC.

The dimensions of the coil (length and width) are not relevant in determining the direction of the force in this scenario.

To know more about field of coil https://brainly.com/question/13091447

#SPJ11

The work need to be done on the car to increase speed is 100 kJ.

We can use the formula:

Work = (1/2) * mass * (final velocity^2 - initial velocity^2)

Substituting the given values, we get:

Work = (1/2) * 1260 kg * (31 m/s)^2 - (21 m/s)^2
Work = (1/2) * 1260 kg * (961 - 441) m^2/s^2
Work = (1/2) * 1260 kg * 520 m^2/s^2
Work = 327,600 J or 327.6 kJ

Therefore, the net work done on the car to increase its speed from 21.0 m/s to 31.0 m/s is 327.6 kJ, which is more than 100 kJ.

to know more about work

brainly.com/question/31981132

#SPJ11

The answers are: A. Average velocity of deuteron = 107 m/s, B. Time taken by deuteron to cover 8 m = 1.89 x 10^-7 s, C. Acceleration of deuteron = 5.34 x 10^14 m/s^2.

To calculate the average velocity of the deuteron during its acceleration, we can use the formula:
average velocity = (initial velocity + final velocity) / 2
As the deuteron starts from rest, the initial velocity is zero. The final velocity is given as 2 x 107 m/s. Therefore, the average velocity can be calculated as:
average velocity = (0 + 2 x 107) / 2 = 107 m/s
To calculate the time taken by the deuteron to cover the distance of 8 m, we can use the formula:
distance = (initial velocity x time) + (1/2 x acceleration x time^2)
As the initial velocity is zero, the above equation reduces to:
distance = 1/2 x acceleration x time^2
Rearranging the equation, we get:
time = sqrt(2 x distance / acceleration)
Substituting the values, we get:
time = sqrt(2 x 8 / acceleration) = sqrt(16 / acceleration)
To find the acceleration, we can use the formula:
final velocity^2 = initial velocity^2 + 2 x acceleration x distance
As the initial velocity is zero, the equation becomes:
final velocity^2 = 2 x acceleration x distance
Substituting the values, we get:
(2 x 107)^2 = 2 x acceleration x 8
Simplifying, we get:
acceleration = (2 x 107)^2 / (2 x 8) = 5.34 x 10^14 m/s^2
Substituting this value in the time equation, we get:
time = sqrt(16 / 5.34 x 10^14) = 1.89 x 10^-7 s

To know more about deuteron visit:

brainly.com/question/30009431

#SPJ11

The power rating of an electrical appliance is the amount of electrical energy that it consumes per unit time. It is usually measured in watts (W) or kilowatts (kW), and represents the rate at which the appliance converts electrical energy into other forms, such as heat, light, or mechanical work.

The current draw of an appliance depends on its power rating and the voltage applied to it. According to Ohm's Law, the current (I) drawn by an appliance is equal to the power (P) divided by the voltage (V), or I = P/V. For example, if an appliance has a power rating of 1000 watts and is connected to a voltage of 120 volts, the current it draws is 8.33 amperes (A).

It is important to note that the current draw of an appliance can affect the performance of the electrical system it is connected to. Large appliances with high power ratings, such as air conditioners, refrigerators, and electric water heaters, can cause voltage drops and other problems if they are not properly sized and installed.

In general, it is a good practice to check the power rating and current draw of an electrical appliance before using it, and to ensure that it is compatible with the electrical system it will be connected to. This can help prevent safety hazards and improve the efficiency and reliability of the system.

To learn more about power rating refer here:
https://brainly.com/question/26256725

#SPJ11

The current in the resistor and the current in the inductor will both approach a steady state value. The steady state current in the resistor will be I = V/R = 20/2 = 10 A.

The steady state current in the inductor will be I = V/XL, where XL is the inductive reactance. XL = 2πfL, where f is the frequency of the AC voltage across the inductor (which in this case is zero since it is a DC voltage).
When an 8.0-mH inductor and a 2.0-ohm resistor are wired in series to a 20-V ideal battery, and the switch is closed at time 0, the current initially starts at zero. After a long time, the inductor behaves like a short circuit (no resistance), allowing the full voltage from the battery to be applied across the resistor. Using Ohm's Law (V = IR), the current in the resistor and the inductor after a long time will be:
I = V / R = 20 V / 2.0 ohms = 10 A

To know more about current visit:

https://brainly.com/question/13076734

#SPJ11

The net radiant heat flux to the surface is 736.43 W/m^2.

To determine the total hemispherical absorptivity of the surface, we need to integrate the spectral absorptivity curve over all wavelengths. From the graph, we can see that the spectral absorptivity is approximately 0.7 across all wavelengths. Therefore, the total hemispherical absorptivity of the surface is 0.7.

Next, assuming that the surface is at 1000 K, we can use the Kirchhoff's law to determine the total hemispherical emissivity of the surface. Since ε = α at thermal equilibrium, we know that the emissivity is also 0.7.

To calculate the net radiant heat flux to the surface, we need to use the Stefan-Boltzmann law, which states that the net radiant heat flux is equal to the difference between the emissive power and the absorptive power of the surface.

The emissive power is given by the Stefan-Boltzmann law as εσT^4, where σ is the Stefan-Boltzmann constant. Plugging in the values, we get:

εσT^4 = 0.7 * 5.67 x 10^-8 * (1000)^4 = 1576.43 W/m^2

The absorptive power is simply the product of the total hemispherical absorptivity and the incident radiation flux. From the graph, we can see that the spectral distribution of the incident radiation is approximately 1200 W/m^2 across all wavelengths. Therefore, the absorptive power is:

0.7 * 1200 = 840 W/m^2

Finally, the net radiant heat flux to the surface is:

1576.43 - 840 = 736.43 W/m^2

Learn more about heat flux here:-

https://brainly.com/question/30763068

#SPJ11

To sketch the elevation has a function of time t, let's break down the scenario into its four segments:

1. Rising phase (0 to 10 seconds): The person starts at rest (velocity = 0 m/s) and speeds up upwards. During this phase, the graph of h(t) will be increasing and concave up, reflecting the positive acceleration.

2. Slowing down phase (10 to 20 seconds): The person slows down and comes to a temporary stop. During this phase, the graph of h(t) will still be increasing but now concave down, reflecting the negative acceleration (deceleration).

3. Descending phase (20 to 30 seconds): The person starts descending, speeding up during this phase. The graph of h(t) will now be decreasing and concave down, reflecting the negative velocity and positive acceleration.

4. Soft landing phase (30 to 40 seconds): The person slows down and makes a soft landing (velocity = 0 m/s). During this phase, the graph of h(t) will be decreasing and concave up, reflecting the negative acceleration. For the unfortunate landing scenario, the last phase would be different:

5. Unfortunate landing phase (30 to 40 seconds): The person does not slow down sufficiently and hits the ground with a non-zero velocity. In this case, the graph of h(t) will be decreasing and still concave down when reaching the ground, reflecting the negative velocity and positive acceleration.

The time function is used to generate a decimal number for a given time based on the hours, minutes and seconds information you provide.

Learn more about function of time at https://brainly.com/question/28161261

#SPJ11

The process of the blue giant start includes stellar Formation, main Sequence Phase, expansion and Cooling, helium Fusion, variable Behavior, and supernova.

The stage in the formation of a star just before nuclear reactions ignite. After a massive red giant star ejects its outer layers, its hot inner core is exposed, and it becomes a blue giant star.

During the process of a blue giant star,  once a star consumes all its hydrogen, the core superheats and pushes its surface layers far out into space.

The process of the blue giant start includes;

Learn more about blue giant stars here: https://brainly.com/question/31222192

#SPJ1

In a main sequence star, gravitational collapse is balanced by the process of nuclear fusion, specifically hydrogen fusion, in its core. The tremendous gravitational forces exerted by the star's mass cause it to contract, attempting to collapse inward. However, the intense pressure and temperature at the core initiate and sustain nuclear fusion reactions, primarily converting hydrogen into helium.

During this fusion process, hydrogen nuclei combine to form helium, releasing an enormous amount of energy. This energy is radiated outwards, counteracting the force of gravity and providing the necessary pressure to maintain the star's equilibrium.

The fusion reactions create an outward pressure known as radiation pressure, which pushes against the inward gravitational force. The balance between gravity and radiation pressure ensures that the star remains stable and does not collapse further or expand uncontrollably.

This delicate equilibrium between gravitational collapse and the energy generated by nuclear fusion allows main sequence stars to maintain a relatively stable size, temperature, and luminosity throughout their main sequence lifetimes, where they spend the majority of their stellar evolution.

To know more about nuclear fusion  click this link-

https://brainly.com/question/14019172

#SPJ11

For a 1.00 μC point charge, the potential will be 100 V at a distance of 0.0899 meters, and it will be 2.00 × 102 V at a distance of 0.04495 meters.

To find the distance at which the potential is a certain value, we can use the formula for electric potential: V = kQ / r, where V is the potential, k is the electrostatic constant (8.99 × 10^9 N m^2/C^2), Q is the charge (1.00 μC), and r is the distance from the point charge.
1. For 100 V potential: 100 = (8.99 × 10^9)(1.00 × 10^-6) / r. Solving for r, we get r ≈ 0.0899 meters.
2. For 2.00 × 10^2 V potential: 200 = (8.99 × 10^9)(1.00 × 10^-6) / r. Solving for r, we get r ≈ 0.04495 meters.

Learn more about electrostatic here:

https://brainly.com/question/16489391

#SPJ11