a gas mixture in a 1.40- l container at 297 k contains 10.0 g of ne and 10.0 g of ar . calculate the partial pressure (in atm ) of ne and ar in the container.

The balanced equation of the oxidation-reduction reaction in basic solution is:

The equation is balanced  in basic solution as follows:

Unbalanced equation:

SiO₂+ Y → Si + Y³⁺

Balance the elements that change oxidation state:

SiO₂ + 2 Y → Si + Y³⁺

Balance oxygen by adding water to the side that needs it:

SiO₂+ 2 Y + 2H₂O → Si + Y³⁺

Balance hydrogen by adding hydroxide ions to the opposite side:

SiO₂ + 2Y + 2H₂O → Si + Y³⁺ + 4OH⁻

Balance the charge by adding electrons to one side:

SiO₂ + 2Y + 2H₂O + 4e- → Si + Y³⁺ + 4OH⁻

Therefore, the balanced equation for the oxidation-reduction reaction in basic solution is:

SiO₂ + 2Y + 2H₂O + 4e- → Si + Y³⁺ + 4OH⁻

Learn more about redox equations at: https://brainly.com/question/21851295

#SPJ4

According to ideal gas equation the density at STP is 102.47 g/cm³.

The ideal gas law is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law .

It is given as, PV=M/RT where R= gas constant whose value is 8.314.The law has several limitations.Substitution of values in equation gives density= 14.2×600/8.314×10102.47 g/cm³.

Learn more about ideal gas law,here:

https://brainly.com/question/6534096

#SPJ1

To create a solution with an anion concentration equal to 0.898 M, you would need to add 58.32 grams of magnesium chloride to 766 mL of water.

To calculate the grams of magnesium chloride needed, we first need to determine the molar mass of magnesium chloride, which is 95.21 g/mol. We then convert the volume of water to liters by dividing 766 mL by 1000, giving us 0.766 L. Next, we use the formula for molarity, which is Molarity (M) = moles of solute / volume of solution in liters. Rearranging the formula, we find that moles of solute = Molarity × volume of solution in liters. Plugging in the values, we get moles of solute = 0.898 M × 0.766 L = 0.688668 mol.

Finally, we multiply the moles of solute by the molar mass to get the grams of magnesium chloride needed: 0.688668 mol × 95.21 g/mol ≈ 58.32 grams. Therefore, approximately 58.32 grams of magnesium chloride must be added to the water to create the desired solution.

To learn more about  molarity click here

brainly.com/question/13386686

#SPJ11

The actual yield of CO2 was less than 2.53L due to the presence of water vapor in the collected gas.

When gas is collected over water, it can contain water vapor, which adds to the observed volume. To determine the actual yield of CO2, the volume of the water vapor needs to be subtracted from the observed volume. This can be done by using the ideal gas law and considering the vapor pressure of water at the given conditions.

By subtracting the vapor pressure of water from the total pressure, the pressure of the CO2 gas can be calculated. Then, using the ideal gas law, the volume of the CO2 gas can be determined. This volume represents the actual yield of CO2.

Therefore, the actual yield of CO2 is expected to be less than the observed volume of 2.53L when the gas was collected over water.

To learn more about ideal gas law click here

brainly.com/question/30458409

#SPJ11

The minimum concentration of Cu(NO3)2 required to precipitate iodide from a solution containing [I-] = 0.017 M can be calculated using the Ksp expression for CuI. The minimum concentration is approximately 3.4 x 10^-7 M.

[tex]CuI(s) ⇌ Cu2+(aq) + 2I-(aq)[/tex]

[tex]Ksp = [Cu2+][I-]^2 = 5.1 x 10^-12[/tex]

Let x be the molar solubility of CuI in the presence of 0.017 M I-.

Then, [Cu2+] = x and [I-] = 0.017 + 2x.

Substituting into the Ksp expression and solving for x, we get x = 3.4 x 10^-7 M.

Therefore, the minimum concentration of Cu(NO3)2 required to precipitate iodide is approximately 3.4 x 10^-7 M.

Learn more about molar here:

https://brainly.com/question/8732513

#SPJ11

We can use the ideal gas law and stoichiometry to determine the amount of H₂O needed to produce 1.2 L of O₂ gas at 300 K and 0.951 atm. The calculated mass of H₂O needed is around 5.74 g.

The balanced equation for the reaction is:

2H₂O(l) → 2H₂(g) + O₂(g)

From the balanced equation, we can see that for every 2 moles of water, 1 mole of oxygen gas is produced. Using the ideal gas law, we can relate the number of moles of a gas to its volume, temperature, and pressure:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

We can rearrange this equation to solve for n:

n = PV/RT

We have the values for P, V, and T, so we can calculate the number of moles of oxygen gas:

n(O₂) = (0.951 atm)(1.2 L)/(0.0821 L·atm/mol·K)(300 K) = 0.0474 mol

According to the balanced equation, 1 mole of oxygen gas is produced from 2 moles of water, so we need half as many moles of water:

n(H₂O) = 0.5 × n(O₂) = 0.5 × 0.0474 mol = 0.0237 mol

Finally, we can convert the number of moles of water to its mass using the molar mass of water:

m(H₂O) = n(H₂O) × M(H₂O) = 0.0237 mol × 18.015 g/mol = 0.427 g

Therefore, we need 0.427 g of water to form 1.2 L of oxygen gas at a temperature of 300 K and a pressure of 0.951 atm.

To know more about the ideal gas law refer here :

https://brainly.com/question/28257995#

#SPJ11

The rate constant for this reaction is –0.29 s–1, which represents the rate of change in concentration of no over time.

To find the rate constant, we can use the equation for the first-order rate law, which is:
Rate = k [A]

Where Rate is the change in concentration of the reactant (in this case NO) over time, k is the rate constant, and [A] is the concentration of the reactant.

We are given the initial concentration of NO (2.8 × 10–3 mol/l) and the concentration after a period of time (2.0 × 10–3 mol/l). We can use this information to calculate the change in concentration:
Δ[A] = [A]final – [A]initial
Δ[A] = (2.0 × 10–3 mol/l) – (2.8 × 10–3 mol/l)
Δ[A] = –0.8 × 10–3 mol/l

Note that the negative sign indicates that the concentration of NO is decreasing over time.
We are also given the time period, s, but we don't need it to solve for the rate constant.

Now we can plug in the values we have into the rate law equation:
Rate = k [A]
Rate = (–0.8 × 10–3 mol/l) / s
k = Rate / [A]
k = (–0.8 × 10–3 mol/l) / (2.8 × 10–3 mol/l)
k = –0.29 s–1

Note that the rate constant is negative, which is expected for a decreasing concentration of a reactant. The units of the rate constant are s–1, which means that the concentration of NO decreases by 0.29 mol/l per second.

To know more about first-order rate law visit:

https://brainly.com/question/13264346

#SPJ11

The thermal efficiency as a percentage is approximately 53.82%.

To calculate the thermal efficiency for a heat engine operating between a source and a sink, you can use the formula:

Thermal efficiency = 1 - (T_cold / T_hot)

First, convert the temperatures to Kelvin:

T_hot = 377°C + 273.15 = 650.15 K
T_cold = 27°C + 273.15 = 300.15 K

Now, substitute the values into the formula:

Thermal efficiency = 1 - (300.15 / 650.15) = 1 - 0.4618 ≈ 0.5382

As a percentage, the thermal efficiency is approximately 53.82%. Among the given options, the closest choice is 54%.

More on thermal efficiency: https://brainly.com/question/11900895

#SPJ11

The temperature inside the balloon is  [tex]28.2 ^0C[/tex]. When temperature increases, the volume of the balloon also increases due to the relationship between temperature and average kinetic energy. As the air inside the balloon is heated, it becomes less dense than the ambient air.

To calculate the temperature inside the hot air balloon, we can use the relationship between volume and temperature, known as Charles's Law. When the volume of a gas is directly proportional to its temperature when pressure is constant is known as Charles's Law. The initial volume in this case is [tex]55,500 m^3[/tex] and the initial temperature is 21 °C, while the final volume is [tex]74,000 m^3[/tex]. By setting up a proportion, we can solve for the final temperature:

[tex](55,500 m^3 / 21 ^0C) = (74,000 m^3 / x)[/tex]

Cross-multiplying and solving for x, we find that the temperature inside the balloon is approximately [tex]28.2 ^0C[/tex].

The average kinetic energy of the gas particles increases, when the temperature increases,This leads to more frequent and energetic collisions between the particles, causing them to move further apart. As a result, the volume of the gas expands.

The difference in density between the hot air inside the balloon and the surrounding ambient air is what allows the balloon to lift off the ground. Hot air has a lower density compared to normal air. As the air inside the balloon is heated, it becomes less dense than the ambient air. This difference in density creates a buoyant force, which is greater than the weight of the balloon and its contents. Consequently, the balloon lifts off the ground.

Learn more about buoyant force here:

https://brainly.com/question/20165763

#SPJ11

To determine the amount of oxygen required to react with 8.74g of iron, the balanced chemical equation is considered. 7.5152 grams of oxygen are needed to react with 8.74 grams of iron.

According to the balanced chemical equation, 2 moles of iron (Fe) react with 3 moles of oxygen (O2) to produce iron (III) oxide ([tex]Fe_2O_3[/tex]). To find the amount of oxygen needed, we need to calculate the number of moles of iron (Fe) present in 8.74g using its molar mass, which is 55.85 g/mol.

First, we divide the given mass of iron by its molar mass:

8.74g / 55.85 g/mol = 0.1565 mol

Since the molar ratio between iron and oxygen is 2:3, we can calculate the number of moles of oxygen using the ratio:

[tex]0.1565 mol of Fe * (3 mol of O_2 / 2 mol of Fe) = 0.2348 mol[/tex]

Finally, we can convert the moles of oxygen into grams by multiplying by its molar mass, which is 32 g/mol:

0.2348 mol * 32 g/mol = 7.5152 g

Therefore, 7.5152 grams of oxygen are needed to react with 8.74 grams of iron.

Learn more about iron (III) oxide here:

https://brainly.com/question/19392610

#SPJ11

If saturated fatty acids predominate in fat, the fat will most likely d. be solid at room temperature. This is because saturated fats have straight chains and can pack closely together, forming a solid mass. Some common examples of saturated fats include butter, lard, and coconut oil.

However, it is important to note that the presence of saturated fats does not necessarily mean that the fat will always be rich in cholesterol. Cholesterol is a separate molecule that is found in animal products like meat, eggs, and dairy. While some foods high in saturated fat may also be high in cholesterol, others may not.
Similarly, the presence of saturated fats does not guarantee that the fat will be a good source of essential fat (18:2) linoleic acid. Linoleic acid is an omega-6 fatty acid that is essential for human health, but it is not present in high amounts in most saturated fats. Instead, linoleic acid is found in foods like nuts, seeds, and vegetable oils.
Finally, whether fat is liquid or solid at room temperature depends on its fatty acid composition, not just whether it is saturated or unsaturated. For example, olive oil is high in monounsaturated fats but is still liquid at room temperature because it contains a low percentage of saturated fats.

To learn more about saturated fatty acids, refer:-

https://brainly.com/question/14118324

#SPJ11

To determine the volume of a 1.0 M solution of NaOH that would be lethal for a 2 kg animal, we need to consider the lethal dose (LD50) of NaOH for the animal.

LD50 is the dose that is lethal to 50% of the test population. For this example, let's assume the LD50 of NaOH for a 2 kg animal is 40 mg/kg.

Please note that this is a hypothetical value, and actual LD50 values may vary depending on the specific animal species.

Step 1: Calculate the lethal dose for the 2 kg animal.

Lethal dose = LD50 × animal's weight

Lethal dose = 40 mg/kg × 2 kg

Lethal dose = 80 mg

Step 2: Convert the lethal dose from mg to moles.

Molecular weight of NaOH = 22.99 g/mol (Na) + 15.999 g/mol (O) + 1.007 g/mol (H) ≈ 40 g/mol

80 mg × (1 g/1000 mg) = 0.08 g

0.08 g NaOH × (1 mol/40 g) ≈ 0.002 moles of NaOH

Step 3: Calculate the volume of the 1.0 M NaOH solution needed.

Moles of solute = Molarity × Volume of solution

0.002 moles = 1.0 M × Volume

Volume = 0.002 L or 2 mL

Therefore, the volume of a 1.0 M solution of NaOH that would be lethal for a 2 kg animal is approximately 2 mL.

To know more about lethal dose (LD50)refer here

https://brainly.com/question/30025708#

#SPJ11

The amount of heat would be 1112 kJ. Therefore, the correct answer is c) 1112 kJ.

To calculate the amount of heat required to melt the given amount of ice, we can use the following formula:

q = m * ΔHfus

where q is the amount of heat required, m is the mass of ice, and ΔHfus is the enthalpy of fusion of water.

First, we need to convert the mass of ice from grams to moles, using the molar mass of water:

1 mole of water (H2O) = 18.015 g

3333 g of ice = 3333/18.015 = 185.05 moles of ice

Now, we can use the formula to calculate the amount of heat required:

q = 185.05 mol * 6.010 kJ/mol

q = 1112 kJ

Thus the right option is c) 1112 kJ.

Learn more about the enthalpy: https://brainly.com/question/16720480

#SPJ11

An audio source with a sound intensity 1,000 times the value of k would produce 30 decibels of sound, as represented by option G.

The equation given to model the number of decibels produced by an audio source is d = 10 log (1/k), where 1 is the sound intensity and k is a constant. To find the number of decibels produced by an audio source with a sound intensity 1,000 times the value of k, we substitute 1,000 for 1 in the equation.

d = 10 log (1/k) becomes d = 10 log (1,000/k).

Since log (1,000/k) can be simplified as log(1,000) - log(k) = 3 - log(k), the equation becomes d = 10(3 - log(k)).

To further simplify, we can use the logarithmic property log(a) - log(b) = log(a/b). Therefore, d = 10 log(1,000/k) becomes d = 10 log(1,000/k) = 10 log(1,000) - 10 log(k) = 30 - 10 log(k).

This means that an audio source with a sound intensity 1,000 times the value of k would produce 30 decibels of sound. Therefore, the correct option is G.

Learn more about sound intensity here:

https://brainly.com/question/32194259

#SPJ11

The steric number for the central atom in SF2 is 3 and its hybridization is sp2. This can be determined by counting the number of atoms bonded to the central atom (two fluorine atoms) and the number of lone pairs on the central atom (one lone pair). The steric number is the sum of these values.

The hybridization of the central atom in SF2 is sp2. This is because the steric number is 3, which corresponds to an sp2 hybridization. The three hybrid orbitals are used to form the three sigma bonds with the fluorine atoms and the lone pair occupies one of the unhybridized p orbitals.

The steric number is determined by counting the number of atoms bonded to the central atom and the number of lone pairs on the central atom. In this case, there are two bonded fluorine atoms and one lone pair, giving a steric number of 3. The hybridization is determined by the steric number, which corresponds to sp2 hybridization in this case.

The hybridization of the central atom is determined by the steric number. A steric number of 3 corresponds to sp2 hybridization. This means that the central atom uses three hybrid orbitals to form sigma bonds with the fluorine atoms, and the lone pair occupies one of the unhybridized p orbitals.

Overall, the steric number of the central atom in SF2 is 3 and its hybridization is sp2.

To know more about hybridization   refer to

https://brainly.com/question/30010106

#SPJ11

25.4 mL of the 0.321 M KOH solution is required to titrate 15.0 mL of the 0.181 M [tex]H_3PO_4[/tex] solution.

In this reaction, one mole of [tex]H_3PO_4[/tex]reacts with three moles of KOH. Therefore, the balanced equation for the reaction can be written as:

[tex]H_3PO_4(aq) + 3KOH(aq) = 3H_2O(l) + K_3PO_4(aq)[/tex]

The number of moles of [tex]H_3PO_4[/tex] present in the solution can be calculated as follows:

moles of [tex]H_3PO_4[/tex]= Molarity x Volume = 0.181 M x 0.0150 L = 0.002715 moles

Since three moles of KOH react with one mole of H3PO4, the number of moles of KOH required can be calculated as:

moles of KOH = 3 x moles of [tex]H_3PO_4[/tex]= 3 x 0.002715 moles = 0.008145 moles

The concentration of the KOH solution is 0.321 M. The volume of the KOH solution required can be calculated using the following formula:

Volume of KOH solution = moles of KOH / Molarity of KOH

Volume of KOH solution = 0.008145 moles / 0.321 M = 0.0254 L = 25.4 mL (rounded to 3 significant figures)

For more question on titrate click on

https://brainly.com/question/13031875

#SPJ11

The volume of 0.321 M KOH solution required to titrate 15.0 mL of 0.181 M H3PO4 solution is 25.5 mL.

In order to calculate the volume of KOH solution required to titrate the given amount of H3PO4 solution, we need to use the balanced chemical equation and the stoichiometry of the reaction.

The balanced chemical equation shows that 3 moles of KOH are required to react with 1 mole of H3PO4. Therefore, the moles of KOH required can be calculated using the equation:

moles of H3PO4 = Molarity x Volume (in liters)

moles of KOH = 3 x moles of H3PO4

Once we have the moles of KOH required, we can use the molarity of the KOH solution to calculate the volume of KOH required:

moles of KOH = Molarity x Volume (in liters)

Volume of KOH = moles of KOH / Molarity

Substituting the values given in the problem, we get:

moles of H3PO4 = 0.181 x 0.0150 = 0.00272

moles of KOH = 3 x 0.00272 = 0.00816

Volume of KOH = 0.00816 / 0.321 = 0.0255 L = 25.5 mL

Therefore, 25.5 mL of 0.321 M KOH solution is required to titrate 15.0 mL of 0.181 M H3PO4 solution.

Learn more about solution here :

https://brainly.com/question/1616939

#SPJ11

Therefore, the molar mass of X gas is 1.67 times that of Xe gas. Since X gas is made up of homonuclear diatomic molecules, its chemical formula must be either N2, O2, F2, Cl2, Br2, or I2.

Let's denote the unknown gas as "X" and its molar mass as "M". The molar mass of Xe gas is 131.29 g/mol. According to Graham's law, we have:
(rate of effusion of X gas) / (rate of effusion of Xe gas) = sqrt(MXe) / sqrt(MX)
Substituting the given ratio of effusion rates, we get:
8.07 = sqrt(131.29 / MX) / sqrt(131.29 / M)
Squaring both sides of the equation and solving for MX, we get:
MX = 131.29 / (8.07^2) * M
Simplifying the expression, we get:
MX = 1.67 * M
Therefore, the molar mass of X gas is 1.67 times that of Xe gas. Since X gas is made up of homonuclear diatomic molecules, its chemical formula must be either N2, O2, F2, Cl2, Br2, or I2.

The gas you are referring to is a homonuclear diatomic gas, meaning it consists of two identical atoms bonded together. The rate at which a gas escapes through a pinhole is inversely proportional to the square root of its molar mass, as described by Graham's law of effusion.

To know more about molar mass visit:-

https://brainly.com/question/22997914

#SPJ11

Yes, two identical half-cells can indeed constitute a galvanic cell. In fact, this is often the case in laboratory experiments where the focus is on understanding the principles of electrochemistry.

A galvanic cell is made up of two half-cells, each of which contains an electrode and an electrolyte solution. When the two half-cells are connected by a wire and a salt bridge, a flow of electrons occurs from the electrode with the higher potential to the electrode with the lower potential. This creates a current that can be used to do work.

In the case of two identical half-cells, the two electrodes have the same potential, so there is no potential difference between them. As a result, there will be no net flow of electrons and no current will be generated. However, this setup can still be useful for certain types of experiments, such as those that focus on the behavior of specific electrolytes or the effects of temperature on electrochemical reactions.

Know more about Galvanic Cells here:

https://brainly.com/question/13031093

#SPJ11

To prepare a 1.00 L of 2.00 M solution of copper(II) sulfate (CuSO4), you would follow the steps below: Calculate the amount of copper(II) sulfate needed.

Molarity (M) = moles of solute / volume of solution (L)

 moles of solute = Molarity × volume of solution (L)

 moles of CuSO4 = 2.00 mol/L × 1.00 L = 2.00 moles

2. Determine the molar mass of copper(II) sulfate (CuSO4):

  Cu: 1 atom × atomic mass = 1 × 63.55 g/mol = 63.55 g/mol

  S: 1 atom × atomic mass = 1 × 32.07 g/mol = 32.07 g/mol

  O4: 4 atoms × atomic mass = 4 × 16.00 g/mol = 64.00 g/mol

  Total molar mass = 63.55 g/mol + 32.07 g/mol + 64.00 g/mol = 159.62 g/mol

3. Calculate the mass of copper(II) sulfate needed:

  mass = moles × molar mass = 2.00 moles × 159.62 g/mol = 319.24 grams

4. Weigh out 319.24 grams of powdered copper(II) sulfate using a balance.

5. Transfer the weighed copper(II) sulfate into a container or beaker.

6. Add distilled water to the container while stirring to dissolve the copper(II) sulfate. Continue adding water until the total volume reaches 1.00 L.

7. Stir the solution well to ensure thorough mixing.

8. You now have a 1.00 L of 2.00 M copper(II) sulfate solution ready for your lab experiment.

To learn more about  copper click here:

brainly.com/question/30892946

#SPJ11

A galvanic cell that uses the reaction Cu(s) + 2Fe3+(aq) → Cu2+(aq) + 2Fe2+(aq) consists of two half-cells: one with a copper electrode in a Cu2+ solution, and another with an iron electrode in a Fe3+ solution. The overall cell potential is positive, indicating a spontaneous redox reaction.

In this galvanic cell, copper acts as the reducing agent, losing electrons to become Cu2+(aq) while iron acts as the oxidizing agent, gaining electrons to become Fe2+(aq). The copper electrode, which undergoes oxidation, is the anode, while the iron electrode, which undergoes reduction, is the cathode. The anode and cathode are connected by a wire, allowing the flow of electrons from the anode to the cathode. Additionally, a salt bridge or porous disk is present to maintain electrical neutrality by allowing the transfer of ions between the two half-cells.

As the reaction proceeds, the copper electrode will decrease in mass as it loses Cu(s) to the solution, and the iron electrode will increase in mass as Fe3+ ions are reduced to Fe2+. The cell potential can be calculated using the standard electrode potentials of the two half-reactions and the Nernst equation, which considers the concentrations of the reacting species. This galvanic cell demonstrates a real-life application of redox reactions and their ability to generate electricity through spontaneous chemical reactions.

Know more about Galvanic Cell here:

https://brainly.com/question/13031093

#SPJ11

a. 895.9 g of [tex]CO_2[/tex] are produced in 24 hours.

b. A 3.65 kg supply of [tex]Na_2O_2[/tex] would produce enough [tex]O_2[/tex] is 6.16 kg of O2

a. First, we need to calculate the volume of air breathed in 24 hours:

24 hours = 1440 minutes

1440 minutes x 4.50 L/min = 6,480 L

The volume percent of [tex]CO_2[/tex] in air is 0.034, so the volume of [tex]CO_2[/tex]produced is:

6,480 L x 0.034 = 220.32 L

Using the ideal gas law, we can convert this volume of [tex]CO_2[/tex] to moles:

PV = nRT

(735 mmHg) (220.32 L) = n (0.08206 L·atm/mol·K) (298 K)

n = 20.38 mol [tex]CO_2[/tex]

Finally, we can convert moles of [tex]CO_2[/tex] to grams using the molar mass of [tex]CO_2[/tex]:

20.38 mol [tex]CO_2[/tex] x 44.01 g/mol = 895.9 g [tex]CO_2[/tex]

b. We can use the given balanced equation to calculate the amount of [tex]Na_2O_2[/tex] needed to produce 1 mole of [tex]O_2[/tex]:

[tex]2Na_2O_2(s) + 2CO_2(g) = 2Na_2CO_3(s) + O_2(g)[/tex]

1 mole of [tex]Na_2O_2[/tex] produces 1/2 mole of [tex]O_2[/tex].

To produce 3.65 kg (3650 g) of [tex]O_2[/tex], we need:

3650 g [tex]O_2[/tex]x (1 mole [tex]O_2[/tex]/ 32.00 g) x (2 moles [tex]Na_2O_2[/tex] / 1 mole [tex]O_2[/tex]) x (77.98 g Na2O2 / 1 mole [tex]Na_2O_2[/tex] ) = 18,926 g [tex]Na_2O_2[/tex]

Therefore, a 3.65 kg supply of [tex]Na_2O_2[/tex] would last:

3650 g [tex]O_2[/tex] / (18,926 g [tex]Na_2O_2[/tex] / 2) = 0.386 cycles

Each cycle produces 1/2 mole of [tex]O_2[/tex] , so a single cycle produces:

(1/2 mole [tex]O_2[/tex]) x (32.00 g/mole) = 16.00 g [tex]O_2[/tex]

Therefore, a 3.65 kg supply of [tex]Na_2O_2[/tex] would produce enough [tex]O_2[/tex] for:

0.386 cycles x 16.00 g [tex]O_2[/tex] /cycle = 6.16 kg of [tex]O_2[/tex]

For more question on hours click on

https://brainly.com/question/29859174

#SPJ11

A domestic wastewater has a reaction rate coefficient of 0.3 1/d at 20° C. The ultimate BOD of the sample is 240 mg/L. The BOD remained after incubation at 20° C for 5 days is 96 mg/L (rounded off to two decimal places).

The reaction rate coefficient (k) of the domestic wastewater is given as 0.3 1/d at 20° C. The ultimate BOD of the sample is given as 240 mg/L, which means that the maximum amount of oxygen that can be consumed by the sample has been determined.

To find the remaining BOD after incubation, we can use the following formula:
BOD_remaining = BOD_ultimate * e^(-k * t)
Where: BOD_remaining is the BOD after incubation, BOD_ultimate is the ultimate BOD of the sample (240 mg/L), k is the reaction rate coefficient (0.3 1/d), t is the incubation time (5 days), and e is the base of the natural logarithm (approximately 2.71828).
1. Plug the values into the formula: BOD_remaining = 240 * e^(-0.3 * 5)
2. Calculate the exponent: -0.3 * 5 = -1.5
3. Find the value of e raised to the power of -1.5: e^(-1.5) ≈ 0.22313
4. Multiply the ultimate BOD by the calculated value: 240 * 0.22313 ≈ 103.68.

To know more about reaction visit:

https://brainly.com/question/28984750

#SPJ11

The correct answer is B. When the pH changes from 4.0 to 6.0, the [H+] (concentration of hydrogen ions) decreases by a factor of 100.

First, let's define what we mean by pH. pH is a measure of the concentration of hydrogen ions (H+) in a solution. The pH scale ranges from 0 to 14, with 0 being the most acidic, 14 being the most basic, and 7 being neutral.
When the pH changes from 4.0 to 6.0, we are moving two units up the pH scale, which means the solution is becoming less acidic and more basic.
To determine how the concentration of hydrogen ions changes with a change in pH, we can use the equation:
pH = -log[H+]
This equation tells us that the concentration of hydrogen ions is inversely proportional to the pH. In other words, as the pH goes up, the concentration of hydrogen ions goes down, and vice versa.
To calculate the change in concentration of hydrogen ions when the pH changes from 4.0 to 6.0, we can use the equation:
[H+]1/[H+]2 = 10^(pH2 - pH1)
Where [H+]1 is the initial concentration of hydrogen ions at pH 4.0, [H+]2 is the final concentration of hydrogen ions at pH 6.0, and pH1 and pH2 are the initial and final pH values, respectively.
Plugging in the values, we get:
[H+]1/[H+]2 = 10^(6-4) = 100

To know more about pH visit :-

https://brainly.com/question/30390372

#SPJ11

2.75 moles of aluminum (Al) will react with 5.5 moles of oxygen (O2) according to the balanced chemical equation. This is determined by the mole ratio between Al and O2.

To determine the amount of oxygen (O2) that reacts with 2.75 moles of aluminum (Al), we need to refer to the balanced chemical equation. The balanced equation for the reaction between aluminum and oxygen is:

4 Al + 3 O2 → 2 Al2O3

From the equation, we can see that 4 moles of aluminum react with 3 moles of oxygen to produce 2 moles of aluminum oxide (Al2O3). By using the mole ratio between aluminum and oxygen, we can calculate the amount of oxygen required. Since the mole ratio is 4:3, for every 4 moles of aluminum, we need 3 moles of oxygen. Therefore, for 2.75 moles of aluminum, we will require (2.75 × 3) / 4 = 5.5 moles of oxygen.

Learn more about Aluminum here: brainly.com/question/28989771

#SPJ11

After precisely three weeks, approximately 3.91 grams of the substance will remain.

The half-life of a substance is the time it takes for half of the initial amount to decay or transform into another substance. In this case, if the half-life is 3.70 days, it means that after 3.70 days, half of the substance will remain, and after another 3.70 days, half of that remaining amount will remain, and so on.

To find out how many grams will remain after precisely three weeks, we need to convert the time to the same unit as the half-life. There are 7 days in a week, so three weeks would be equal to 3 × 7 = 21 days. Now, we can calculate the number of half-lives that have occurred within this time frame by dividing 21 days by 3.70 days.

21 days ÷ 3.70 days = 5.68 half-lives

Since each half-life reduces the amount by half, we can calculate the remaining amount by raising 0.5 to the power of the number of half-lives:

Remaining amount = Initial amount × (0.5)^(number of half-lives)

Remaining amount = 50.0 g × (0.5)^(5.68)

Remaining amount ≈ 3.91 g

Therefore, after precisely three weeks, approximately 3.91 grams of the substance will remain.

Learn more about half-life .

brainly.com/question/31666695

#SPJ11

The consumption of resources impacts Earth's environments by causing habitat destruction, biodiversity loss, air and water pollution, and climate change.

As the demand for resources increases, more and more land is cleared for mining, logging, and agriculture, leading to habitat destruction and biodiversity loss. The extraction, processing, and transportation of resources also release pollutants into the air and water, which can harm ecosystems and human health.

The burning of fossil fuels, which are often used to power the production and transportation of goods, releases greenhouse gases that contribute to climate change. Therefore, it is important for individuals and societies to consider the environmental impacts of their consumption choices and find ways to reduce their ecological footprint.

To know more about the Resources, here

https://brainly.com/question/12216242

#SPJ1

The pH of a 0.10M solution of NaCN(aq) can be determined by using the Henderson-Hasselbalch equation. The equation states that pH = pKa + log([base]/[acid]). The answer is C. 8.75.

Acid is a substance that has a pH level below 7.0. It is generally characterized as a sour taste, corrosive nature, and the ability to turn certain blue litmus paper red. Acids have a wide range of uses, from industrial to laboratory to the kitchen and beyond. Common uses of acids include cleaning, bleaching, pickling, etching, and neutralizing bases. Acids can be found in many everyday materials such as vinegar, lemon juice, and battery acid. In addition, acids can be classified into two main categories: mineral acids and organic acids.

HCN is the acid and NaCN is the base. The pKa of HCN is 4.9 x 10⁻¹⁰.

Therefore, the pH can be calculated as follows:

pH = 4.9 x 10⁻¹⁰ + log([NaCN]/[HCN])

pH = 4.9 x 10⁻¹⁰ + log(0.10/4.9 x 10⁻¹⁰)

pH = 4.9 x 10⁻¹⁰ + 3.2

pH = 8.75

Therefore the correct option is C.

To learn more about pH on:

https://brainly.com/question/172153

#SPJ4

The answer is 858 joules, which is the amount of energy required to raise the temperature of 220 g of lead from 42.0°C to 72.0°C.

To calculate the joules required to raise the temperature of 220 g of lead from 42.0°C to 72.0°C, we can use the formula Q = m x C x ∆T, where Q is the amount of heat energy required, m is the mass of the substance, C is the specific heat capacity of the substance, and ∆T is the change in temperature.
Substituting the values given in the question, we get:
Q = 220 g x 0.130 joules/g.C x (72.0°C - 42.0°C)
Q = 220 g x 0.130 joules/g.C x 30.0°C
Q = 858 joules
Therefore, the answer is 858 joules, which is the amount of energy required to raise the temperature of 220 g of lead from 42.0°C to 72.0°C.

To know more about Temperature visit:

https://brainly.com/question/31055263

#SPJ11

The false statement among the options is  An acid-base indicator can be non-polar. Option e is correct answer.

An acid-base indicator is a substance that undergoes a color change in the presence of an acid or a base. It is typically a weak acid or a weak base that can exist in different forms, each having a different color. When an indicator is in its acidic form, it may be represented as an acid (option a) and have a specific color. Similarly, when it is in its basic form, it can be considered as a base (option c) and exhibit a different color. Therefore, options a and c are true statements.

Furthermore, an indicator can have one highly colored form (option b) or two highly colored forms (option d), depending on its acid-base equilibrium and the pH of the solution. For example, litmus is a commonly used indicator that exists in two forms: red in acidic solutions and blue in basic solutions.

However, the statement in option e, that an acid-base indicator can be non-polar, is false. Acid-base indicators are typically polar compounds because they contain functional groups that are involved in acid-base reactions. The polar nature of the indicator molecules allows them to interact with polar solvents and participate in the necessary chemical reactions for color changes.

Learn more about acid-base indicator here

https://brainly.com/question/13004359

#SPJ11

The fluorine gas sample has a pressure of 2.21 atm, rounded to the closest 0.01. Atmospheres (atm) are the units of pressure.

We may use the ideal gas law to calculate the pressure of the fluorine gas sample, which specifies that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
First, we must convert the temperature from Celsius to Kelvin by multiplying it by 273.15. As a result, the temperature is 279 K.

Then we can plug our values into the ideal gas law equation:

P(20.0 L) = (1.18 mol)(0.0821 L*atm/mol*K)(279) K

When we simplify the equation, we get:

P = (1.18 mol)(0.0821 L*atm/mol*K)(279 K)/20.0 L
For more such questions on pressure

https://brainly.com/question/28012687

#SPJ11