A motorcycle and rider have a total mass equal to 300 kg. The rider applies the brakes, causing the motorcycle to decelerate at a rate of -5 m/s^2. What is the net force on the motorcycle?

a) Using Lenz's law, There is no induced current in loop A.

b) The direction of induced current is counter clockwise in the loop B.

According to Lenz's law, induced current will flow counterclockwise to resist the change in magnetic flux as the loop moves away from the wire.

The Lenz law, which states that the direction of electric current induced in a conductor by changing magnetic field is such that the magnetic field formed by induced current opposes the initial changing magnetic field, can be used to determine the direction of induced current. As a result, the magnetic field generated by the coil's current is directed in the opposite direction from the magnetic field outside.

The direction a positive charge would go is represented by the positive sign for current. The positive current arrow points in the opposite direction from where the electrons go because current in metal wires is carried by negatively charged electrons.

To learn more about Lenz's law from given link

https://brainly.com/question/15610645

#SPJ4

Complete Question -

The Lyman series of emission lines of hydrogen atoms are observed in the ultraviolet region and the wavelengths of the first three lines are -822.5 nm, -364.6 nm  and -182.3 nm.

a) The region of the electromagnetic spectrum in which the lines of the Lyman series are observed is the ultraviolet region.

The lines of the Lyman series are observed in the ultraviolet region because the energy levels involved in these transitions are located in the UV portion of the spectrum.

The series starts from the first excited state and ends with the ground state, each transition corresponds to a specific wavelength of UV light.

b) The wavelengths of the first three lines in the Lyman series can be calculated using Rydberg formula and specific values of [tex]n_{i[/tex] and [tex]n_{f}[/tex] :

λ = R(1 ÷ [tex]n_{i[/tex]² - 1 ÷[tex]n_{f}[/tex]²)

where λ is the wavelength, R is the Rydberg constant (approximately 1.097 x 10⁷ m⁻¹), [tex]n_{i[/tex] is the initial energy level, and [tex]n_{f}[/tex] is the final energy level.

For the first line ([tex]n_{i[/tex] = 2, [tex]n_{f}[/tex] = 1):

λ = 1.097 x 10⁷ m⁻¹ (1÷2² - 1÷1²) = 1.097 x 10⁷ m⁻¹ (1÷4 - 1) = 1.097 x 10⁷ m⁻¹ (-3÷4) = -822.5 nm.

For the second line ([tex]n_{i[/tex] = 3, [tex]n_{f}[/tex] = 1):

λ = 1.097 x 10⁷ m⁻¹ (1÷3² - 1÷1²) = 1.097 x 10⁷ m⁻¹ (1÷9 - 1) = 1.097 x 10⁷ m⁻¹ (-8÷9) = -364.6 nm.

For the third line ([tex]n_{i[/tex] = 4, [tex]n_{f}[/tex] = 1):

λ = 1.097 x 10⁷m⁻¹ (1÷4² - 1÷1²) = 1.097 x 10⁷ m⁻¹ (1÷16 - 1) = 1.097 x 10⁷ m⁻¹ (-15÷16) = -182.3 nm

Because it is in the ultraviolet portion of the electromagnetic spectrum, take note that the wavelength is negative.

Learn more about hydrogen at

https://brainly.com/question/29597178

#SPJ4

The phasor diagram for the given emf has been drawn below and explained as well.

In electrical circuits, A phasor is a scaled line whose length represents an AC quantity that has both magnitude (peak amplitude) and direction (phase) frozen at some given time. It is generally represented by V=Vo sin(ωt+φ) where Vo represents the magnitude of the emf, ωt tells the phase at a given point in time and φ shows the initial stage.

In the given question-

(170V)cos((2π×60)t)

=(170V)sin(π/2-(2π×60)t)

ωt=2×π×60×60×10-³=7.2π

φ=π/2

Vo=170V

so, V at a given point will be,

V=170sin(π/2-7.2π)= -137.53 V

so, the phasor will look something like this(the image has been attached below).

Learn more about Phasor diagrams on

https://brainly.com/question/29554532?referrer=searchResults

#SPJ4

Answer:

The law of conservation of energy states that energy can neither be created nor destroyed - only converted from one form of energy to another. This means that a system always has the same amount of energy, unless it's added from the outside.

Explanation:

I hope this quick explanation helps :D

Explanation:

Energy can neither be created or destroyed but can convert one form to the another

According to a recent study, assuming no nuclear holocaust, errant asteroid, or other catastrophe occurs, Earth may support life for at least another 1.75 billion years.

However, even in the absence of such terrifying end-of-the-the-world situations, cosmic forces will finally make the Earth inhabitable. The age of the Earth is 4.5 billion years. Nevertheless, in the six million years that people have been on Earth, they have had the chance to develop, According to a recent study, assuming no nuclear holocaust, errant asteroid, or other catastrophe occurs, Earth may support life for at least another 1.75 billion years.

Learn more about forces here-

https://brainly.com/question/13191643

#SPJ4

The difference in mass is then 2.01649u - 2.01355u = 0.00294u. This means that the energy released in this reaction is equal to 0.00294u × (c^2) = 4.621 x 10^-12 J.

What is mass?
Mass is a measure of the amount of matter an object contains. It is different from weight, which is a measure of the force gravity exerts on an object. Mass is typically measured in kilograms (kg) or grams (g).

The energy released in this reaction is equal to the mass difference between the products and the reactants multiplied by the speed of light squared. In this reaction, the mass of the reactants (1 proton and 1 neutron) is equal to 1.007825u + 1.008665u = 2.01649u.

The mass of the product (deuterium nucleus) is 2.01355u.  

This means that the energy released in this reaction is equal to 0.00294u × (c^2) = 4.621 x 10^-12 J.

To learn more about mass

https://brainly.com/question/19385703

#SPJ4

Worst resolution to Best resolution of the telescopes -

radio waves, infrared, visible, ultraviolet, X-rays

Resolution is inversely correlated with primary mirror size. The value of, or the theoretical resolution, decreases as the mirror's diameter increases. Therefore, in theory, a large telescope can resolve more information than a small telescope at a particular wavelength.

Resolution improves with larger apertures and shorter wavelengths of light, which is dependent on the telescope's aperture. The smallest angular separation that the telescope can resolve is the resolving power, which is expressed as an angle.

Astronomical interferometers, a type of telescope array, are capable of producing telescopes with the highest angular resolutions: At optical wavelengths, these devices can attain angular resolutions of 0.001 arcsecond, and at x-ray wavelengths, they can achieve far higher resolutions.

To learn more about resolution of telescope from given link

https://brainly.com/question/25821830

#SPJ4

Approximately 1.4 kg mass of liquid silver that the second machine can hold.

To learn more about The approximate mass of liquid silver refer to:

https://brainly.com/question/4263333

#SPJ1

Answer:

2.05 an $4.2 isn't the same result

Explanation:

no exceptions

Answer:

proportionally smaller

Explanation:

Speed after Collision is initially they move in opposite direction​ = 9.6m/s

Speed is the rate of a distance's ensuing change in length over time. It has a dimension of time-distance. As a result, the fundamental unit of time with the basic unit for distance are combined to form that SI unit of speed. Thus, the metre per second (m/s) is the SI unit measure speed.

given-

M1 = 8 kg

M2= 4 kg

V1 = 11m/s

V2 = 7m/s

According to the law of momentum conservation

M1V1+M2V2= (M1+M2)V

V= 9.6m/s

To learn more about speed visit:

https://brainly.com/question/28224010

#SPJ1

From an evolutionary standpoint, the division between bacteria, archaea, and eukarya is the most fundamental one among all living things on earth.

Since both Bacteria and Archaea are made up of unicellular organisms, scientists once believed that these two domains of life were the most closely linked to one another. The most closely linked domains, according to new genome sequencing data, are actually Archaea and Eukarya. Prokaryotic cells lack membrane-bound cell organelles such mitochondria, the Golgi apparatus, and chloroplasts, among other traits. There isn't a tightly confined, clearly defined nucleus. Circular DNA makes up genetic material, which is found bare in the cytoplasm of cells.

Learn more about organism here-

https://brainly.com/question/12825206

#SPJ4

P equals 625000 watts The engine provides power during this period, enabling anything to be done or accomplished. political or governmental power

influencing oneself, others, and circumstances This kind of influence comes from personal qualities rather than institutional authority. Personal power is more of a mindset or attitude. Self-efficacy and collaboration skills are important to those with high personal power.

Real power is energy, and as our awareness and self-awareness expand, it grows from within. Being powerful depends on having insight. A person with true authority does not affect the world without taking the larger picture into account.

Work done by the steam engine, W=4500*10³J

Time taken to do work, t = 7.2 seconds

                P=W/t

                  =4500*10³/7.2

                  =625000watt

To know more about power visit:

https://brainly.com/question/28350669

#SPJ1

The potential difference of a battery is 11V. Hence, the current through the resistor a is 1.1A.

Possibly existing variation between any two points The amount of labour required to move a unit positive charge along any path between two places in the electric field is defined as the distance that can be traveled by the charge without accelerating.

A two-terminal passive electrical component used in electrical circuits to limit or regulate the flow of current. A resistor's primary function is to lower the voltage and reduce current flow in a specific area of the circuit.

Effective resistance of b, c and d

             1/R  => 1/(5+5)+1/10

               R= 5Ω

V = IR

I = V/R ;

I = 11/(5+5) => 1.1A

Part A => 1.1A

Part B => (5 x 1.1) = 5.5V

Part C => I/2 => 1.1/2 => 0.55A

Part D => (0.55 x 10) => 5.5V

Part E => 0.55A

Part  F=> 0.55 x 5 => 1.25V

Part G => 0.55A

Part H => 0.55 x 5 = 1.25V

Learn more about potential difference here:

brainly.com/question/15126283

#SPJ4

Answer:

Explanation:

1) The amount of work done by Tyler is equal to the force applied multiplied by the distance over which the force is applied. In this case, the force applied is 0.5 N and the distance is 20 meters. So, the work done is 0.5 N x 20 meters = 10 Joules

2) The work done is equal to the force applied multiplied by the distance over which the force is applied. In this case, the work done is 18 Joules and the force applied is 3 N. To find the distance, we can divide the work by the force: 18 Joules / 3 N = 6 meters

3) To find the force applied by each girl, we can use the formula work = force x distance.

Yamileth: 28 Joules = force x 4 meters => force = 28 Joules / 4 meters = 7 N

Cianna: 36 Joules = force x 4 meters => force = 36 Joules / 4 meters = 9 N

Yamileth used a force of 7 N to get Mr. Williams the copies and Cianna used a force of 9 N. Therefore, Cianna used greater force than Yamileth.

The resultant electric​ force acting on a charge q₂ is 0.0063 N.

Electric force is the repulsive or attractive interaction of two charged bodies. Newton's laws of motion describe the impact and effects of any force on a given body.

The x-component of electric force is

= {484 + 9×10⁹×4×10⁻⁶×6.7/(6.7²+5.6²)^(3/2)} × 7×10⁻⁶ N

=  0.0059 N

The y-component of electric force is

= 9×10⁹×4×10⁻⁶×5.6/(6.7²+5.6²)^(3/2)} × 7×10⁻⁶ N

= 0.0021 N

Hence, the resultant force is = √{(0.0059)²+(0.0021)²} N.

= 0.0063 N.

Hence, the resultant electric force is 0.0063 N..

Learn more about electric forces here:

https://brainly.com/question/2526815

#SPJ1

The time that have been taken for the ball to fall to the ground is  2 s.

We have to note that in this case, what we are trying to find is the time that have been taken. The question says that an object slides off a table 10 meters above the ground with an initial horizontal speed of 5 meters per second.

Now;

Distance that have been covered = 10 meters

Speed with which the ball falls =  5 meters per second

Speed = distance/Time

Time = Distance/Speed

Time = 10 m/5 m/s

Time = 2 s

Learn more about speed :https://brainly.com/question/28224010?

#SPJ1

According to the given statement As a result, the function is getting stronger with time (10,infinity).

A relation in between collection of inputs and outputs is known as a function. A function is, to put it simply, a connection between inputs in which each input is connected to precisely one output. Each function has a range, codomain, and domain.

We must first find the derivative of the function and then identify the intervals where the derivative is positive in order to ascertain on which intervals the function is rising. F'(x) = 300 - 3x² is the derivative of f(x) = 300x - x3. By setting the derivative to zero and figuring out x, we may determine the function's crucial points:

f'(x) = 300 - 3x² = 0

3x² = 300

x^2 = 100

x = ±10

We can observe that for x -10 and for x > 10, the derivative of the function is negative. As a result, if x > 10, the function is growing.

Alternately, by examining the function's second derivative, f"(x) = -6x, we can also determine that the function is rising. The function is concave down and growing since it is always negative.

As a result, the function is getting stronger with time (10,infinity)

To know more about Function visit:

https://brainly.com/question/12431044

#SPJ4

Any process in which there is no heat transfer is referred to as adiabatic. This doesn't imply a constant temperature, just that no heat is being moved into or out of the system.

Temperature change in an isothermal process is zero, hence specific heat must be infinite.

The main distinction between these two processes is that there is no heat transfer from or to the liquid during the adiabatic process. The isothermal process, on the other hand, transfers heat to the environment in order to maintain a constant temperature throughout. There is a heat transfer.

The heat generated by an adiabatic process will be zero. The total amount of heat and work done constitutes the change in internal energy, according to the first law of thermodynamics.

To learn more about adiabatic process from given link

https://brainly.com/question/12965417

#SPJ4

0.0647 kg/m^3. is the correct answer .

What is Density ?

Density (volumetric mass density or specific mass) is the mass of matter per unit volume. The most common symbol for density is ρ (lowercase Greek letter rho), but the Latin letter D can also be used. Mathematically, density is defined as mass divided by volume.

[1] The density of matter varies with temperature and pressure. This variation is typically small for solids and liquids and much larger for gases. Increasing the pressure on an object decreases the volume of the object, thus increasing its density. Increasing the temperature of a substance (with some exceptions) increases its volume and decreases its density. In most materials, heating the bottom of the liquid causes convection of heat from the bottom to the top as the density of the heated liquid decreases, increasing the density compared to a denser, unheated material. To do.

To learn more about density ,click the given link;

https://brainly.com/question/1354972

#SPJ4

The x component of velocity of a particle as a function of time is shown in
Part A and Part B is explained below.

Velocity is a measure of the rate of change of an object's position in a given frame of reference. It is a vector quantity, meaning it has both magnitude and direction. Velocity is a fundamental concept in physics, and it is important in many areas such as mechanics, astronomy, and kinematics. Velocity is typically expressed in meters per second (m/s) and can be calculated by dividing the distance traveled by the time it took to travel that distance.

Part A
The work done on the particle is positive over the intervals a to b, f to g, d to f, b to c, d to e and e to f.
Part B
The work done on the particle is negative over the intervals d to e, d to f, e to f, a to b, c to d and f to g.

To know more about velocity click-
https://brainly.com/question/24445340
#SPJ4

Answer:

Neutron to Proton -  Electron - anti-neutrino

Mass of Neutron - 1.0086654 u

Mass of Proton  - 1.0072766 u

Mass of Electron - .000548597 u

1.0086654 - (1.0072766 + .0005486) = .0008402 units

i u = 931.478 Mev

.0008402 * 931.478 = .7826 Mev released

Isothermal compressibility is given by K=−1V(∂V∂P)T.

What is meant by isothermal compressibility?

Isothermal compressibility is defined by the fractional differential change in volume due to a change in pressure.

What is the isothermal process?

An isothermal process is a thermodynamic process in which the temperature of a system remains constant. The transfer of heat into or out of the system happens so slowly that thermal equilibrium is maintained.

How is isothermal compressibility calculated?

To measure isothermal compressibility a known increment of pressure must be applied and the consequent isothermal volume change measured. During compression, however, heat is generated in the test liquid and must be dissipated before the volume change can be measured.

Is isothermal positive or negative?

The isothermal compression of the gas was performed in two ways, one irreversible and one reversible. The work done on the gas is positive because the gas is compressed; the surroundings do positive work on the gas.

Thus, the formula is K=−1V(∂V∂P)T.

To know more about isothermal compressibility:

https://brainly.com/question/14642814

#SPJ4

Create a concentration gradient of certain molecules between the regions inside and outside the "inner bag," a form of potential energy.

Potential energy is the energy stored in an object due to its position or chemical composition. It is the energy of an object that is ready to be released and converted into kinetic energy. Examples of potential energy include the energy stored in a compressed spring, the energy stored in a raised weight, the energy stored in a charged battery, and the energy stored in the bonds of molecules or atoms.

The inner and outer membranes of the mitochondria form a "bag within a bag" structure, which is necessary to create a concentration gradient of certain molecules between the inner and outer regions. This gradient allows for the formation of a potential energy source. This potential energy is used to drive the synthesis of ATP from ADP and the enzyme responsible for this reaction. This structure also helps to keep molecules of ADP close to the enzyme, thus allowing for efficient synthesis of ATP. Additionally, this structure allows for the embedding of light-reactive accessory pigments within the membranes. This way, they can absorb the energy of incoming light and convert it into chemical energy, which can then be used to power the synthesis of ATP.

To know more about potential energy click-
https://brainly.com/question/24933254
#SPJ4

Pressure will be constant at both ends, with the use of formula, the upward force is 10,000 N and the height is 625 cm

Pressure can simply be defined as a ratio of force to area. Hydraulic lift system makes use of pressure principles.

Given that a downward force of 400 N is applied to the small piston with a diameter of 6 cm in the hydraulic lift system.

What is the

a) upward force exerted by the large piston with diameter of 30 cm

Pressure will be the same at both end.

Since pressure P = F/A

The area of the piston = πr²

F1/A1 = F2/A2

Since π will cancel out, substitute the Force and radius r directly

400/0.06² = F/0.3²

F = 111111.1 × 0.09

F = 9999.99 N

F = 10,000 N

b) if the input force pushes the small piston down by 25 cm, we can know how height will the large piston rise by using the same formula

400/0.25 = 10000/L

1600 = 10000/L

L = 10000/1600

L = 6.25 m

L = 625 cm

Therefore, the upward force exerted by the large piston is 10,000 N approximately and the height is 625 cm

Learn more about Pressure here: https://brainly.com/question/28012687

#SPJ1

When a 2 kg object going 30 m/s feels a −4 N force for 8 seconds, the final velocity of the object is 14 m/s.

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

Initial momentum of the object = 2 kg× 30 m/s = 60 kg-m/s.

Impulse applied on  the object = - 4 N×8 second = - 32 N-second.

Hence, final momentum of the object = (60 - 32)  kg-m/s = 28  kg-m/s.

So, the final velocity of the object  is= (28/2) m/s = 14 m/s

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

All objects—including humans—emit electromagnetic radiation. Temperature affects radiation wavelength. Thermal radiation describes this. Humans emit mostly infrared radiation at 12 microns. Infrared means "beyond the red" since its wavelength is longer than red visible light.

Objects emit thermal radiation based on their surface temperature, area, and features. Warmer objects radiate more heat. Infrared ear or forehead thermometers measure body temperatures by sensing infrared radiation. At airports, ports, and borders, infrared cameras examine feverish travelers quickly.

In meteorology, satellite photos depict cloud top and ocean/land surface infrared radiation intensities. Higher cloud tops are cooler and release less infrared radiation. Infrared satellite images show cloud top temperature distribution. Infrared satellite photos' "night vision" makes them useful 24/7, unlike visible images. Weather forecasters often utilize different colors (red, blue, green, etc.) to indicate cloud top temperatures to help them analyze cloud structure. However, most people prefer black-and-white cloud photos.

To see a similar example:

https://brainly.com/question/6490455

#SPJ4

Correct statements are 1, 2,  4. The system is a bound system; the planet can never escape, When the separation between the two bodies is r2, the kinetic energy of the system is (B-C) and The potential energy of the system decreases as the planet moves from r to r2.

Correct options are as follows -

When the separation between the planet and star is r₂, the kinetic energy of the system is zero.

When the separation between the planet and star is r₂, the potential energy of the system is zero.

The energy that an item has or acquires when its location changes as a result of being in a gravitational field is known as gravitational potential energy. Gravitational potential energy can be defined as an energy that has a connection to gravitational force or gravity.

Therefore, the object's position is greater the higher the gravitational energy. Because it must fall a greater distance, a book on a higher shelf has more potential energy than one on the lowest shelf.

To learn more about gravitational potential energy from given link

https://brainly.com/question/3120930

#SPJ4

Complete Question -

FM radio waves are more easily diffracted around buildings than AM radio waves because they have lower frequencies and longer wavelengths.

What is wavelength?

Wavelength is the distance between two successive crests of a wave. It is the distance that a wave travels in one complete cycle, and is measured in meters or other units of length.

FM waves are able to bend around obstacles more easily than AM waves due to their longer wavelength. The longer wavelength of an FM wave allows it to bend and diffract around obstacles more easily than the shorter wavelength of an AM wave, which is more likely to be blocked or reflected by obstacles.

To learn more about wavelength

brainly.com/question/10728818

#SPJ4

The human eye can distinguish two car headlights 2.0m apart when the angular separation is about 0.03°.

Diffraction is the bending of waves around an obstacle or through an opening. When light or sound waves encounter an obstacle, the waves are scattered and spread out in a pattern known as a diffraction pattern. The size and shape of the obstacle affects the amount of diffraction that occurs. The same is true for an opening, such as a slit or a hole, which causes the waves to spread out in multiple directions. Diffraction is an important concept in many areas of physics, such as optics, acoustics, and quantum mechanics.

This is calculated by using the formula θ = 1.22λ/D, where θ is the angular resolution, λ is the wavelength of the light, and D is the diameter of the eye pupil. Assuming a light wavelength of 560nm and an eye pupil diameter of 6mm, the angular resolution is 0.03°.

The minimum angular separation an eye could resolve when viewing two stars, considering only diffraction effects, is 0.0003°. This is calculated using the same formula as before, only with the wavelength set to 550nm.

In reality, the minimum angular separation is about 1′ of arc, which is significantly larger than the answer calculated in part b). This is because diffraction effects are the only factor taken into account in part b), while in reality, other factors such as the eye's optical aberrations, the eye's accommodation, and atmospheric turbulence all play a role in limiting the resolution of the eye. Additionally, the eye's acuity is not constant and can be affected by fatigue and other factors. Thus, the true angular resolution of the eye is much lower than the theoretical limit calculated in part b).

To know more about diffraction click-
https://brainly.com/question/8645206
#SPJ4