The smallest density of a liquid in which the rock will float is 4.84 N / (V * g), where V is the volume of the rock and g is the acceleration due to gravity.
The smallest density of a liquid in which the rock will float can be determined by considering the balance of forces acting on the rock when it is suspended in water.
When the rock is fully immersed in a liquid, it experiences an upward buoyant force equal to the weight of the liquid displaced by the rock. This buoyant force counteracts the downward force of gravity on the rock, allowing it to float.
The buoyant force (F_b) can be calculated using Archimedes' principle: F_b = ρ_fluid * V * g, where ρ_fluid is the density of the fluid, V is the volume of the rock, and g is the acceleration due to gravity.
The weight of the rock (F_g) is given by F_g = m * g, where m is the mass of the rock.
In equilibrium, the tension in the string (F_tension) is equal to the difference between the weight of the rock and the buoyant force: F_tension = F_g - F_b.
Given that the mass of the rock is 1.80 kg and the tension in the string is 12.8 N, we can calculate the weight of the rock: F_g = m * g = 1.80 kg * 9.8 m/s^2 = 17.64 N.
Substituting the values into the equation for tension, we have: 12.8 N = 17.64 N - ρ_fluid * V * g.
To find the smallest density of the liquid in which the rock will float, we need to find the maximum volume of the rock that can be submerged in the liquid. This occurs when the rock is fully submerged but not floating on the surface.
Assuming the entire mass of the rock is submerged, we can equate the volume of the rock (V_rock) to the volume of the fluid displaced: V_rock = V_fluid.
By rearranging the equation for tension, we can solve for the density of the fluid: ρ_fluid = (F_g - F_tension) / (V * g).
Plugging in the known values, we have: ρ_fluid = (17.64 N - 12.8 N) / (V * g).
Since the volume (V) of the rock cancels out due to the equality with the volume of the fluid, the density of the fluid is given by: ρ_fluid = 4.84 N / (V * g).
Learn more about Density here:-
https://brainly.com/question/29775886
#SPJ11
Sonography captures images by using
the speed of a sound and wave reflection
the reflection and refraction of the sound wave
the distance between the receiver and the wave intensity
the wave intensity and sound speed
Sonography captures images by using the reflection and refraction of the sound wave.
The correctoption is B
What is Sonography?Sonography is described as a diagnostic medical test that uses high-frequency sound waves, or ultrasound waves, to create images of tissues, glands, organs, and blood or fluid flow within the body.
Sonography uses a device called a transducer on the surface of the skin to send ultrasound waves and listen for an echo.
The difference between sonography and ultrasound is that an ultrasound is a tool used to take a picture while a sonogram is the picture that the ultrasound generates.
In conclusion, sonography is the use of an ultrasound tool for diagnostic purposes.
Learn more about sonography at: https://brainly.com/question/2681483
#SPJ1
Answer:
Sonography captures images by using the reflection and refraction of the sound wave,
Or B.
Hope this helps!
Which action describes a response to internal stimuli? A Catching a ball at a baseball game B Drinking when you are thirsty C Running at the sight of a wild lion D Writing a thank you note
Drinking when you are thirsty is response to internal stimuli.
Stimuli is the physical or chemical change in the environment of a living organism. Stimuli may results in some action or some functional activity. There are two types of stimuli, internal stimuli and external stimuli.
Internal stimuli is the internal response which arises inside the body of the organism.
External stimuli is the response of the organism to some external change in the environment.
Catching a ball at a baseball game is the response to the change in the outside the body activity (external change).
Drinking the water when you are thirsty is the response to that activity which is felt by us inside the body.
Running at the sight of a wild lion is the response an to external activity.
Writing a thank you note is also a response to the external activity to a nice gesture of someone.
To know more about internal stimuli, here
https://brainly.com/question/19872894
#SPJ4
You weigh 770 N.
What would you weigh if the Earth were six
times as massive as it is and its radius were
two times its present value?
Answer in units of N.
If the Earth were six times as massive as it is and its radius were two times its present value, then weight is calculated as 1155 N.
What is weight?In science and engineering, weight of an object is the force acting on object due to the gravity.
As we know , F = G * M * m / r ^ 2
Here, F = Gravitational force ; G = Gravitational constant (6.67 x 10 ^ -11 Nm ^ 2 / kg ^ 2) ; M = mass of earth ; m = mass of object and r = radius of earth
Given, the earth were six times as massive
So, M = 6M
radius is three times its present value: r = 2r
So, F = G * (6M) * m / (2r) ^ 2
= (6/4) * (G * M * m / r ^ 2)
= (3/2) * (G * M * m / r ^ 2 )
Therefore, weight will be;
(3/2) * F = (3/2) * (770)
Weight = 1155 N
To know more about weight, refer
https://brainly.com/question/229459
#SPJ1
A car (1600kg) is moving at 5.0 m/s on a mountainside road. The cars elevation is 4.5 m from the valley floor. What is the cars gravitational potential energy? J
Answer:
70,560 J
Explanation:
GPE = mgh = (1600 kg)(9.8 m/s²)(4.5 m) = 70,560 J
**GPE is independent of velocity (v)
What is the best term or statement to define energy?
The power to do activities is the best term or statement to define energy.
Energy is the potency to do work or make changes to an object. Nowadays, it is very possible to do this because several studies and experiments have been carried out on how to convert energy to do work. People use energy to carry out many activities and make human life easier. Such as cooking, moving cars and ships, lighting houses and roads, walking, making various products, and sending astronauts into outer space.
Energy can be found in many forms such as motion, light, heat, electricity, gravitational, and chemicals.
Energy cannot be destroyed but can be changed from one form to another. An example is the energy contained in coal or natural gas which can be converted into electrical energy. Likewise when humans eat. Food contains chemical energy, and the body stores this energy to use as kinetic energy during activities.
More about Energy on:
https://brainly.com/question/5144470
#SPJ4
what force does the car exert if it’s mass is 1201 kg and the car goes from 5.40 m/s to 16.3 m/s in 107 m
122 N force does the car exert if it’s mass is 1201 kg and the car goes from 5.40 m/s to 16.3 m/s in 107 S.
What is the straightforward meaning of force?At this point, it is perfectly acceptable to refer to a force as a pushed or even a pull. A power is not a material that an object "contains" or "has in it." A force is applied to one thing by another. The idea of a force encompasses both living and non-living things.
GIVEN-
a = (16.3- 5.4)/107
=0.10 m/s^2
m= 1201 kg
F = ma
= 122 N
To learn more about force visit:
https://brainly.com/question/13191643
#SPJ1
A peron ha a weight if 800N in an elevator that a econd with an acceleration of 5m/. What i the reading on the cale of the elevator
The scale in the moving elevator will read 1200 N. The result is obtained by using Newton's second law.
What is Newton's second law?The Newton's second law states that "The acceleration is directly proportional to the net force acting on an object and inversely proportional to the object's mass." It can be expressed as
a = ∑F/m
or
∑F = ma
Where
∑F = net forcea = accelerationm = object's massIn an elevator, a person has a weight of 800 N. It moves with acceleration of 5 m/s². Find the scale read!
We use g = 10 m/s².
The mass of the person is
W = mg
800 = m(10)
m = 80 kg
The acceleration is positive. So, we assume that the elevator is travelling upward with acceleration of a. By using Newton's second law, we'll get
∑F = ma
N - W = ma
N = W + ma
N = 800 + 80(5)
N = 800 + 400
N = 1200 N
Hence, in the moving elevator, the scale will read 1200 N.
Learn more about weight in an elevator here:
brainly.com/question/30057222
#SPJ4
UNIT (5) Momentum 5.D Change in Momentum DATE NAME Scenario A 10 kg box, initially at rest, moves along a smooth horizontal surface. A horizontal force is applied to the box. The magnitude of the force changes as a function of time as shouwn. Take the positive direction to be to the right. Tme (econd Data Analysis Rank the magnitude of the impulse applied to the box by the force during each 2-second interval indicated below: PART A: A. 0-2 seconds B. 24 seconds C. 4-6 seconds D.6-8 seconds E.8-10 seconds Smallest impulse Greatest impulse Write a few sentences justifying your reasoning. Use words like speed, velocity, acceleration, time, force, momentum, and impulse. PART B: Using Representations PART C: Re-represent the data given in the force vs. time graph in Part A as a momentum vs. time graph for the same 10 kg box. Step 1: Identify the equation that relates force and momentum. Step 2: How can momentum be found from a force vs. time graph? Step 3: Plot the momentum as a function of time. (Make a table if you need to.) 10Time (s) Momentum (kgm/s) Forte Newtons) 5.D Change in Momentum Quantitative Analysis Use the graph above to calculate the velocity of the box after 10 seconds. For each line in the calculation, explain what was done mathematically. The first line is done for you. Ap = mai The change in momentum is equal to the mass times the change in velocity. UNIT 5. Momentum 5.D Change in Momentum NAME DATE Scenario A 10 kg box, initially at rest, moves along a smooth horizontal surface. A horizontal force is opplied to the box. The magnitude of the force changes as a function of time as shoun. Take the positive direction to be to the right. Tme econd Data Analysis Rank the magnitude of the impulse applied to the box by the force during each 2-second interval indicated below: PART A A. 0-2 seconds B. 2-4 seconds C. 4-6 seconds D. 6-8seconds E.8-10 seconds Greatest impulse Smallest impulse Write a few sentences justifying your reasoning. Use words like speed, velocity, acceleration, time, force, momentum, and impulse. PART B: Using Representations PART C: Re-represent the data given in the force vs. time graph in Part A as a momentum vs. time graph for the same 10 kg box. Step 1: Identify the equation that relates force and momentum. Step 2 How can momentum be found from a force vs. time graph? Step 3: Plot the momentum as a funetion of time. (Make a table if you need to) 10 Time (s) | 135 Return to Table of Contents 2Categeard Momentum (kom/s) 5.D Change in Momentum Quantitative Analysis Use the graph above to calculate the velocity of the bax after 10 seconds. For each line in the calculation, explain what was done mathematically. The first line is done for you. Ap = mAi The change in momentumis equal to the mass times the change in velocity.
From the given data,
Part A: -In opposite direction Greatest impulse B>C>A>D>E smallest impulse
Part B: -increasing constantly thus acceleration is increasing resulting in increase of velocity and momentum as well.
Part C: -[tex]Force $=m$ a $[/tex] =[tex]$m \frac{\Delta v}{\Delta t}=[/tex] [tex]m$ momentum[/tex]
[tex]F=\frac{m}{\Delta t}[/tex]
Mass of box [tex]=10kg[/tex]
Impulse = [tex]F_{average}[/tex] At
A. 0-2 seconds
Impulse = 1.5×2 = 3N sec
B. 2-4 sec
Impulse = 3×2 = 6N sec
C. 4-6 sec
Impulse = 2.75×2 =5.5N sec
D. 6-8 sec
Impulse = 1×2 = 2N sec
E. 8-10 sec
Impulse = 1×2 = 2N sec
In opposite direction Greatest impulse B>C>A>D>E smallest impulse.
For the first two seconds force is increasing constantly thus acceleration is increasing resulting in increase of velocity and momentum as well. Now for the next three seconds a constant force is acting on the box resulting in constant acceleration. After that for the next three seconds force goes on decreasing constantly thus deacceleration and decrease of impulse and velocity. In last 2 seconds deacceleration is in opposite direction that is how box starts moving in opposite direction
[tex](1) Force $=m$ a $[/tex][tex]$=m \frac{\Delta v}{\Delta t}=[/tex][tex]m$ momentum[/tex]
[tex]F=\frac{m}{\Delta t}[/tex]
(2) Area under the curve gives the momentum
For more such questions on Momentum:
https://brainly.com/question/29113044
#SPJ4
Lisa had a velocity of 10 m/s until the neighbors dog started chasing her. She ended up running at 15 m/s after 5 seconds. What was her acceleration?
Formula-
Work with units-
Answers with units-
The acceleration of Lisa having an initial velocity of 10 m/s is 1 m/s².
What is acceleration?Acceleration is the rate of change of velocity.
To calculate Lisa acceleration, we use the formula below,
Formula:
a = (v-u)/t....................... Equation 1Where:
a = Accelerationv = Final velocityu = Initial velocityt = TimeFrom the question,
Given:
v = 15 m/su = 10 m/st = 5Substitute these values into equation 1
a = (15-10)/5a = 5/5a = 1 m/s²Hence, the acceleration of Lisa is 1 m/s².
Learn more about acceleration here: https://brainly.com/question/26408808
#SPJ1
a 0.52 kg football is thrown with a velocity of 15 m/s to the right. A stationary receiver catches the ball and brings it to rear in 0.017s. What is the force exerted on the receiver?
On the receiver, a force of 375 Newton was applied.
What does one newton weigh?
In the walking (English, or customary) system, one newton is equivalent to around 0.2248 pounds of force or 100,000 dynes in the centimeter-gram-second (CGS) system.
What is a force unit of newton?
The newton, abbreviated N, is the Si derived unit of force. Base units that are pertinent to force are: The symbol for the length unit of a metre is m. the kilogramme (kg), a unit of mass. s stands for the second, a unit of time.
To know more about newton visit:
https://brainly.com/question/16889018
#SPJ1
12. a) Sound waves travel at a speed of 340 m s¹ in air
at 20°C. If the frequency of these waves is 2.5 kHz,
what is their wavelength?
b) Infra-red electromagnetic waves travel at a
speed of 3.0 x 108 m s¹. Calculate the frequency of
these waves if their wavelength is 1.2 x 10-6 m.
Answer:
[tex]a)0.136m \\ b)2.5 \times 10 {}^{14} cycle \: per \: sec[/tex]
Explanation:
Greetings!!
Let's start from question a
Given values :-speed(velocity)= 340m/s
frequency=2.5kHz
Temperature= 20°c
required values:-wave length=?
solution:-Firstly, recall velocity-wavelength equation
v=λf,substitute known variables into the equation
(340)= (2500). λTo not get confused 2500 comes when kHz is changed to Hz. (notice)
solve for wavelength
λ= 0.136mfor the second question b. also use the same procedure and the same format ( formula)
Thus, we work as
Given values:-speed(velocity)= 3.0×10^8
wavelength=12×10^-6
required values:-frequency=?
solution:-Firstly, recall velocity-wavelength equation
v=λfsubstitute known values into the equation
(3.0×10^8)= f(1.2×10^-6)
solve for frequency
f= 2.5× 10^14 Hz
If any questions or anything else tag me on comments.
Hope it helps!!!
A train moves from rest to a speed of 25 m/s in 30.0 seconds. What is the magnitude of it's acceleration?
The train accelerates to 25 m/s from rest in 30 seconds. Search for: The train's acceleration. The train accelerates at 0.83 m/s2 after 30 seconds.
How do you determine acceleration?According to the equations a = v/t, acceleration (a) seems to be the product of the variation in velocity (v) and the changes in time (t).
What is the most basic meaning of acceleration?Acceleration is the term for the rate of change in speed. In most cases, but not always, acceleration denotes a shift in speed. The object keeps accelerating because the direction of its velocity is changing even while it travels in a circular motion.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ1
using newton's second law, why does a hunter always presses the butt of a rifle tightly against his shoulder before firing a bullet ?
Answer:
Below
Explanation:
SO the equal but opposite force of the bullet being fired forward doesn't cause the backward force of the rifle to slam into his shoulder possibly causing injury
A hunter always presses the butt of a rifle tightly against his shoulder before firing a bullet because this causes a change in the momentum of the bullet being fired.
What is Newton's second law of motion?Newton's second law of motion states that the rate of change of momentum of a body is directly proportional to the force which is applied to it and the change in momentum of an object takes place in the direction in which the force is being applied.
The acceleration of an object as produced through a net force is directly proportional to the magnitude of the net force, in the same direction as that of the net force, and inversely proportional to the mass of the object.
The butt of the rifle is pressed tightly against the shoulder of the hunter to cause a change in the momentum of the bullet.
Learn more about Newton's law here:
https://brainly.com/question/15280051
#SPJ2
What is the percent composition of HCl by numbers of atoms?
Group of answer choices
a. 1 to 1
b. 1 to 35.5
The composition of HCl (hydrochloric acid) by numbers of atoms is 37% HCl by weight and can be find out by using empirical formula.
Empirical formulas give the lowest whole number ratio of the atoms in a compound. The true or molecular formula gives the exact composition of one molecule. A molecular formula describes the actual numbers of atoms of each element in a molecule.
When the subscripts in a chemical formula represent the simplest ratio of the kinds of atoms in the compound, the formula is called an empirical formula. Most ionic compounds are described with empirical formulas.
If you are not given mass in grams for each element, convert the data you are given to grams of each element. This may involve simple unit conversions. For example, you may be given pounds or milligrams, which you convert to grams using unit analysis.
Sometimes you are given the percentage of each element in the compound. Assume that you have 100 g of compound, and change the numbers for the percentages to grams.
To know more about empirical formula here
https://brainly.com/question/25551417
#SPJ4
A tractor trailer truck with a ma of 3,000 kg i traveling at a peed of 30 m/. What i it momentum?
Answer:
90,000 kgm/s
Explanation:
Momentum is mass × velocity as accorded to the equation:
[tex] \displaystyle{ \text{P = mv}}[/tex]
Where P is momentum, m is mass and v is velocity. Everything is given in the problem, we have to find momentum, therefore:
[tex] \displaystyle{ \text{P} = 3000 \times 30} \\ \\ \displaystyle{ \text{P} = 90000 \: \text{kgm/s}}[/tex]
Therefore, momentum is 90,000 kgm/s
What Is The Difference Between A Mile And A Nautical Mile?
The Difference Between A Mile And A Nautical Mile is that mile is commonly used for terrestrial measurements, while the nautical mile is specifically used for navigation at sea.
A mile and a nautical mile are both units of measurement for distances, but there is a difference between the two. A mile is a standard unit of distance commonly used in the United States and is equal to approximately 1.609 kilometers. A nautical mile, on the other hand, is a unit of measurement used specifically for navigation at sea and is equivalent to 1.852 kilometers, or approximately 1.1508 miles.
In other words, a nautical mile is longer than a standard mile by about 0.1508 miles. This difference is important for navigation on the open sea, where a nautical mile provides a more accurate measure of distance, taking into account the curvature of the earth and the effects of latitude on measurements.
To know more about Nautical Mile click here:
https://brainly.com/question/15270565#
#SPJ11
Convert 3600 s to hr
show all work please and thank you! (SHOW ALL WORK) thanks<3 ill give brainlist
To convert time to hours from seconds, you have to divide the total seconds by 3600.
[tex]\dfrac{3600}{3600} =\texttt{1 hour}[/tex]
3600 seconds would be 1 hour.
The cue ball strikes a the 8 ball. The two balls have the same mass. Which of the following is true.
a.
The amount the cue ball slows down is equal to the amount the 8 ball speeds up.
b.
The 8 ball will speed up more than the cue ball slows down.
c.
The cue ball will slow down more than the 8 ball speeds up.
Answer: A. The amount the cue ball slows down is equal to the amount the 8 ball speeds up. ✅
Explanation:
This is true due to the law of conservation of momentum. In an isolated system, the total momentum before the collision is equal to the total momentum after the collision. Since the two balls have the same mass, the amount of momentum lost by the cue ball will be equal to the amount of momentum gained by the 8 ball. ✅
A car traveling 24 m/s comes to a stop in 8 seconds. What is the acceleration/deceleration?
The acceleration/deceleration is -3 m/s².
This can be calculated by using the equation a = (vf - vi) / t,
where a is the acceleration/deceleration, vf is the final velocity (in this case 0 m/s), vi is the initial velocity (in this case 24 m/s), and t is the time (in this case 8 seconds).
Plugging in the values, we get a = (-0 - 24) / 8, which simplifies to a = -3 m/s².
To know more about velocity, click here:
https://brainly.com/question/10425898
A carton designer is considering cost as she is comparing different shaped cartons. Which of these nets would create a cardboard carton that requires the least amount of cardboard for each cubic inch of volume?.
A carton designer is considering cost as she is comparing different shaped cartons. The nets would create a cardboard carton that requires the least amount of cardboard for each cubic inch of volume is (8 in × 10 in × 10 in). the first option is the correct answer.
Each of the containers in this image is 800 cubic inches in volume.
As a result, for every cubic inch of volume, the carton with the smallest surface area will use the least quantity of cardboard.
The surface area of a cuboid with the dimensions L, W, and H is equal to 2(LW, WH, and LH).
Now, the first cardboard choice, which has dimensions of 8 in. x 10 in. x 10 in., will have a surface area of 2(8 × 10 + 10 × 10 + 8 × 10) = 520 sq, inches.
Now, the surface area of the cardboard in the second choice, which has dimensions of 2(5 × 8 + 8 × 20 + 5 × 20) = 600 sq, inches.
Once more, the third option's cardboard, which has dimensions of 2(4 × 10 + 10 × 20 + 4 × 20) = 640 sq, inches.
Finally, the cardboard in the fourth option, which has dimensions of 2 in × 10 in × 40 in, will have surface are = 2(2× 10 + 10 × 40 + 2 × 40) = 1000 sq, inches.
Hence, the first option will be our choice
Your question is incomplete the full question is attached below
Learn more about height at https://brainly.com/question/16135413
#SPJ4
a Two cars are involved in a head-on collision in an alley. The driver of a car with mass,
ma = 1,200 kg claims to have been traveling west at via = 7 m/s. The driver of the
other car with mass, mb = 1,000 kg claims to have been traveling east at vib = 10
m/s. The investigating officer found that both cars were stuck together and traveled
with a common final velocity after the collision.
Which direction would they be moving after the collision?
west
east
north
no direction/ not moving
Either the eastbound car's driver overestimated or the westbound car's driver underestimated his velocity.
What is the difference between mass and velocity?It has a direction and a magnitude and is a two-dimensional vector quantity. The momentum of an item is given by the equation p=mv if its mass is m and its velocity is v (also a vector quantity). As a result, momentum is calculated by multiplying mass by speed.
Let the given values be
[tex]& m_a[/tex] = Mass of west moving car = 1200 kg
[tex]& m_b[/tex] = Mass of east moving car = 1000 kg
[tex]& v_{i a}[/tex] = Velocity of west moving car = -7 m/s
[tex]$v_{i b}[/tex] = Velocity of east moving car = 10 m/s
v = Combined velocity of the cars = 3 m/s
From the conservation of momentum we get
[tex]$$\begin{aligned}& m_a v_{i a}+m_b v_{i b}=\left(m_a+m_b\right) v \\& \Rightarrow 1200 \times-7+1000 \times 10=(1000+1200) \times 3 \\& \Rightarrow 1600 \neq 6600\end{aligned}$$[/tex]
So, either westward [tex]$(1000 \times 10)$[/tex] moving car needs to have more velocity or eastward [tex]$(1200 \times-7)$[/tex] moving car needs to have less velocity.
Since, mass is constant only the velocity can be different.
Therefore, the correct answer is option d) Either the driver of the westbound car underestimated his velocity, or the driver of the eastbound car overestimated his velocity.
The complete question is:
Two cars are involved in a head-on collision in an alley. The driver of a car with mass, ma = 1,200 kg claims to have been traveling west at via = 7 m/s. The driver of the other car with mass, mb = 1,000 kg claims to have been traveling east at vib - 10 m/s. The investigating officer found that both cars were stuck together and traveled with a common final velocity of 3 m/s, eastward, after the collision.
Assuming that at least one driver is correct, what does an application of the law of conservation of momentum allow the officer to conclude about the accident?
a) The driver of the westbound car was moving significantly faster than reported.
b) Both drivers correctly reported their velocities at the time of the collision.
c) Either the driver of the westbound car overestimated his velocity or the driver of the eastbound car underestimated his velocity, KID.
d) Either the driver of the westbound car underestimated his velocity, or the driver of the eastbound car overestimated his velocity.
To learn more about mass and velocity refer to:
https://brainly.com/question/13974140
#SPJ1
A 2 kg box slides down a frictionless ramp starting
from a height of 3 m. The slope of the ramp is 30°,
What is the box's momentum when it reaches the
bottom of the ramp?
Answers:
A) 15.3 kg•m/s down the ramp
B) 7.7 kg.m/s down the ramp
C) 5.5 kg•m/s down the ramp
D) 2.8 kg•m/s down the ramp
The box's momentum when it reaches the bottom of the ramp is 2.8 kg•m/s down the ramp.
What is the velocity of the box when it reaches the bottom?When the box reaches the bottom of the slope, its speed is v = (nh) n has a value. The block has gravitational potential energy when it briefly comes to rest at the top of the ramp and starts with kinetic energy at the bottom. However, some of that energy is lost due to frictional effort. You can use a free body diagram and Newton's second law to calculate the frictional force on the block. What will happen if you roll two cylinders of the same mass and diameter—one solid and one hollow—down a ramp is how this traditional physics textbook version of the problem is phrased. The solid one will eventually sink, is the solution.To learn more about velocity of the box refer to:
https://brainly.com/question/18935695
#SPJ1
Which is the best way to compare speed and velocity?
A. Slowing down versus speeding up
B. Distance over time vs distance over time and direction
C. Big vs small
D. One is the hunter and one is the prey
Please help as soon ASAP!
If I see the star Sirius in the constellation of Canis Major rise at 8 pm tonight, what time will it rise one week from now
Viewed from the same place, it will lag by about 4 minutes per day.
7 days later puts it at roughly 8:28 PM.
calculate the linear expansivity of brass of length 120 m that assumed a new length of 120.05 m when heated to a temperature 100° c
The linear expansivity of brass of length 120 m that assumed a new length of 120.05 m when heated to a temperature 100° c is 4.167.10⁻¹⁶ 1/K.
What is Linear expansivity?Linear expansivity is the ratio of the length increase of a solid specimen to the temperature change. The expansivity (α) of a specimen is given by the formula l2 = l1(1 +), where l1 is the length of the specimen, and l2 is the length of the specimen when the temperature increases by °.
The linear expansion coefficient can be written in SI units as either °C-1 or °K-1. C in this context stands for Celsius, and K for Kelvin. M0L0T0K1 will be the size of the linear expansion coefficient.
Modifying or lengthening is referred to as expansion. When one dimension (length) changes in length in relation to the volume, this is referred to as linear expansion.
When the temperature rises by one degree, a solid's linear expansivity increases by a fractional amount.
calculate the linear expansivity of brass of length 120 m ?
Assuming the temperature change is 100°C.
α=L−L0/L0- ΔT⇒(1) Δ Greek value is 4
Given L=120
L0=120.05
T=100°c
substitute the given values in equation 1 we have
α=120-120.5/120.05-4(100)
=4.167.10⁻¹⁶ 1/K
To learn more about linear expansivity refers to:
https://brainly.com/question/14325928
#SPJ1
A force of 57. 1 newtons is applied for 0. 977 meters; what work was done on the object?(1 point).
The work was done on the object is 55.8 Joule. The result is obtained by multiplying the force by the distance.
How to find the work done on an object?The work done on an object can be counted by the equation:
W = F × d
Where
W = Work (Joule or Nm)F = Force (Newton)d = distance (meter)We have an object which on it applied:
Force, F = 57.1 NewtonsDistance, d = 0.977 metersFind the word done on the object!
W = F × d
W = 57.1 Newtons × 0.977 meters
W = 55.7867 Nm
W ≈ 55.8 Joule
Hence, the work done by the force on the object is 55.8 Joule or 55.8 Nm.
Learn more about work done by the force here
brainly.com/question/16976412
#SPJ4
An archer shoots an 126 g (remember to convert to kilograms) arrow 88 m/s. How much kinetic energy does it have?
To calculate the kinetic energy of an arrow, we need to know its mass and velocity. Given that the arrow's mass is 126 g, and its velocity is 88 m/s we can use the formula:
kinetic energy = 1/2 * mass * velocity^2
First, we have to convert the mass of the arrow from grams to kilograms, as the formula requires units in kilograms.
1 kg = 1000 g
126 g = 126/1000 kg = 0.126 kg
Then we can substitute the values into the formula:
kinetic energy = 1/2 * 0.126 kg * (88 m/s)^2
kinetic energy = 1/2 * 0.126 * 7744 m^2/s^2
kinetic energy = 468.3 J (joules)
So the kinetic energy of the arrow is 468.3 J. Kinetic energy is a scalar quantity and it represents the energy of motion of an object. In this case, the energy possessed by the arrow due to its motion.
What is the change in potential energy for a 61 kg diver from when she jumps off a 13m high diving board and when she first hits the water?
The change in potential energy for a 61 kg diver from when she jumps off a 13m high diving board is 7,779.33J.
How to calculate potential energy?Potential energy in physics refers to the energy stored by an object due to its position.
The formula for potential energy depends on the force acting on the two objects. For the gravitational force, the formula is:
W = m×g×h = mgh
Where,
m is the mass in kilogramsg is the acceleration due to gravityh is the height in metersAccording to this question, a diver with mass 61kg jumps off 13m high diving board. The potential energy can be calculated as follows:
W = 61 × 9.81 × 13
W = 7,779.33J
Therefore, 7,779.33J is the potential energy of the diver.
Learn more about potential energy at: https://brainly.com/question/24284560
#SPJ1
What describes the speed of a planet traveling in an elliptical orbit around the sun? a. Constant b. Fastest when closest to the sun c. Slowest when closest to the sun d. Fastest when closest to the moon.
The speed of a planet traveling in an elliptical orbit around the sun is b. Fastest when closest to the sun.
ABOUT ELLIPTICAL ORBITThe planets in the solar system revolve around the sun in certain paths called orbits or orbits that are elliptical, not circular.
In ancient times, humans adhered to geocentric understanding. This theory was introduced by the Greek astronomer Claudius Ptolemy in 100-170 AD.
This belief persisted for 1,400 years. According to him, the earth is the center of the solar system. The sun and planets revolve around the earth in a circular path.
Then in 1543, the astronomer Nicolaus Copernicus sparked the Heliocentric model. According to him, the Earth and other planets revolve around the Sun in circular paths. This theory is better than ever. Although, the assumption that the trajectory of a planet's motion is still in the form of a circle.
The planet's orbit is elliptical due to the gravitational interaction between the planet and the sun and other celestial bodies. Johannes Kepler in the 1600s was the first to discuss the shape of planetary orbits.
Learn more about elliptical orbit at
https://brainly.com/question/18283031.
#SPJ4
Answer: B.
fastest when closest to the Sun
Explanation: plato :3
Hope this helps!
Which test measures the reaction time of movement?
Posner reaction time test measures the reaction time of movement.
The Posner cueing task, often known as the Posner reaction time test, evaluates the manual and eye-movement reaction times in response to various signals. Particularly following brain damage, this technique is frequently used to evaluate spatial attention.
An eye-level computer screen is placed in front of the individual during the exam. On the screen, there is a point or cross in the middle with two boxes on either side. A target stimulus, such as a shape, then appears on one of the boxes. The individual presses the keyboard of the computer as soon as the target is identified. The response time is measured precisely in this way.
Learn more about Reaction:
https://brainly.com/question/24795637