A sample is decomposed and 78. 85 g of Iron and 33. 88 g of Oxygen is recovered. What


is the empirical formula of the substance?

To calculate the volume of helium gas under the given conditions, we can use the ideal gas law equation, PV = nRT, where P represents the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

(a) Given that there are 18.75 moles of helium gas, a gauge pressure of 0.350 atm, and a temperature of 10°C, we need to convert the temperature to Kelvin. Adding 273.15 to the Celsius value, we find that the temperature is 283.15 K. Plugging these values into the ideal gas law equation and solving for V, we can determine the volume of the helium gas.

(b) If the gas is compressed to precisely half the volume and the gauge pressure increases to 1.00 atm, we can use the same ideal gas law equation to calculate the new temperature. We will use the new volume, the given pressure, and solve for T.

In summary, for part (a), we will calculate the volume of helium gas using the ideal gas law equation and the given conditions of moles, pressure, and temperature. For part (b), we will calculate the new temperature when the gas is compressed to half the volume and the pressure increases, again using the ideal gas law equation.

To learn more about Gas law - brainly.com/question/30458409

#SPJ11

True. The main answer is that concentration cells work because standard reduction potentials are dependent on concentration.

When two half-cells with the same electrode are connected, but have different concentrations, a potential difference is created due to the difference in concentration of the ions involved in the reaction. This potential difference drives the transfer of electrons from the electrode with lower concentration to the electrode with higher concentration, creating a current flow. The explanation for this is that the standard reduction potential is a measure of the tendency of an electrode to gain electrons in a redox reaction, but this potential is dependent on the concentration of the ions involved in the reaction. Therefore, by changing the concentration, the standard reduction potential also changes, creating a potential difference between the two half-cells and allowing the cell to function as a concentration cell.

For more information on standard reduction potentials visit:

https://brainly.com/question/23881200

#SPJ11

Thin Layer Chromatography (TLC) is a chromatographic technique used to separate and analyze mixtures of compounds. It is a simple and inexpensive method that is widely used in various fields such as chemistry, biochemistry, pharmaceuticals, and forensics.

1A-TLC (Thin Layer Chromatography) was used to monitor the progress of the reaction, determine the polarity and purity of the compounds, and visualize the separation of components.

1b) Two visualization techniques were needed to ensure that all components were properly observed and detected, as some compounds might not be visible under a single technique.
1c) Based on the TLC data, it's difficult to definitively conclude if the reaction went to completion. However, the presence of different spots on the TLC plate indicates that the reaction has progressed, and some product has formed.

2) Column chromatography was used in this experiment to separate and purify the desired product from the reaction mixture. This technique is a good choice because it effectively separates compounds based on their polarity and affinity for the stationary phase.

3) Recrystallization was used in the experiment to further purify the desired product. This method involves dissolving the product in a solvent, then allowing it to slowly recrystallize, which results in a more pure and crystalline solid.

4) The melting point data of the product indicates its purity and identity. The narrow range (145-148°C) suggests that the product is relatively pure, and the specific melting point can be compared to known data to help confirm the identity of the compound.

learn more about Thin Layer Chromatography here:

https://brainly.com/question/10296715

#SPJ11

The statement "Hydrogen can be prepared by suitable electrolysis of aqueous titanium salts" is False.

Hydrogen cannot be prepared by suitable electrolysis of aqueous titanium salts. While titanium can be used as an anode material for electrolysis, it is not a source of hydrogen. Instead, water is typically used as the source of hydrogen in electrolysis processes. In this process, an electrical current is passed through water, splitting it into oxygen gas and hydrogen gas. This method is known as water electrolysis and is an important technique for producing hydrogen gas for use in a variety of applications, including fuel cells and other energy storage systems. While titanium may have some uses in the production of hydrogen, it is not a direct source of the gas and cannot be used for electrolysis of aqueous titanium salts.

Know more about Electrolysis here:

https://brainly.com/question/31726896

#SPJ11

The molarity of the NaOH solution is 0.107 M.

To determine the molarity of the NaOH solution, we can use the concept of stoichiometry. From the given information, we know that a 50.0-mL sample of 0.104 M HCl solution requires 48.7 mL of the NaOH solution for neutralization.

In a neutralization reaction between HCl and NaOH, the mole ratio is 1:1. This means that the moles of HCl used are equal to the moles of NaOH present in the solution.

First, we calculate the number of moles of HCl used:

Moles of HCl = Molarity × Volume

Moles of HCl = 0.104 M × 0.0500 L

Moles of HCl = 0.00520 mol

Since the mole ratio is 1:1, the moles of NaOH in the solution are also 0.00520 mol.

Next, we can calculate the molarity of the NaOH solution:

Molarity of NaOH = Moles of NaOH / Volume of NaOH solution

Molarity of NaOH = 0.00520 mol / 0.0487 L

Molarity of NaOH = 0.107 M

Therefore, the molarity of the NaOH solution is 0.107 M.

Learn more about NaOH solution

brainly.com/question/14296114

#SPJ11

1.05 atm of pressure is equivalent to 798 mmHg of pressure.

To convert 1.05 atm of pressure to its equivalent in millimeters of mercury (mmHg), you can use the following conversion factor: 1 atm = 760 mmHg.

To perform the conversion, simply multiply the given pressure in atm by the conversion factor: 1.05 atm * 760 mmHg/atm = 798 mmHg. Therefore, 1.05 atm is equivalent to 798 mmHg.

Atmospheric pressure can be measured in various units, including atmospheres (atm) and millimeters of mercury (mmHg). The conversion factor between these two units is based on the fact that 1 atmosphere is equivalent to the pressure exerted by a column of mercury that is 760 millimeters high at sea level and at a temperature of 0 degrees Celsius. This relationship is derived from the physical properties of mercury and the definition of atmospheric pressure.

In this case, we are given a pressure value of 1.05 atm and asked to convert it to mmHg. By using the conversion factor of 1 atm = 760 mmHg, we can easily find the equivalent pressure in mmHg. Multiplying the given pressure by the conversion factor (1.05 atm * 760 mmHg/atm), we arrive at the final value of 798 mmHg. This means that 1.05 atm is equal to 798 mmHg when converted to the same unit of pressure measurement.

Know more about Mercury here:

https://brainly.com/question/4025230

#SPJ11

The ligand in the coordination compound tetracarbonylplatinum(IV) chloride is carbonyl. A ligand is a molecule or ion that binds to a central metal atom or ion to form a coordination complex.

Tetracarbonylplatinum(IV) chloride is a coordination compound that consists of a platinum(IV) ion coordinated with four carbonyl ligands and one chloride ion. The chemical formula of the carbonyl ligand is CO, which represents a carbon atom bonded to an oxygen atom through a double bond.

In this compound, each platinum atom is surrounded by four carbonyl ligands, which means there are four CO ligands attached to the central platinum(IV) ion. The coordination number of the platinum(IV) ion is four, indicating that it forms four bonds with the carbonyl ligands.

Additionally, there is one chloride ion present as a counterion to balance the charge of the complex. Therefore, the chemical formula for the ligand in tetracarbonylplatinum(IV) chloride is CO.

Learn more about ligand here:

https://brainly.com/question/31836087

#SPJ11

Forming a hypothesis is necessary before conducting any experiment in scientific research. Therefore, option B is correct.

Scientific research refers to a systematic and structured process of acquiring knowledge and understanding. It can be done through observation, experimentation, and analysis.

It involves investigating a specific problem by using established methods and principles of the scientific method. The goal of scientific research is to generate new knowledge, advance understanding, and contribute to the existing body of scientific knowledge in a particular field or discipline.

Learn more about scientific research, here:

https://brainly.com/question/30547498

#SPJ1

The ground state electron configuration for the phosphide ion (P³⁻) is 1s² 2s² 2p⁶.

The ground state electron configuration for phosphorus (P) is 1s² 2s² 2p⁶ 3s² 3p³.

When phosphorus gains three electrons to form the phosphide ion (P³⁻), three of the 3p electrons are added to fill the 3p subshell completely, resulting in the electron configuration: 1s² 2s² 2p⁶.

Electron configuration refers to the arrangement of electrons in an atom or ion. Electrons occupy different energy levels, and each level can hold a maximum number of electrons. The configuration of electrons determines the chemical and physical properties of the element or ion.

To learn more about electron configuration refer here:

https://brainly.com/question/31812229#

#SPJ11

The Damasios use neuroimaging techniques (e.g., MRI), behavioral assessments, and clinical case studies to study brain injuries.

Neuroimaging techniques, such as magnetic resonance imaging (MRI), allow the Damasios to visualize structural and functional changes in the brain following injury. This helps them identify specific areas affected and understand the neural basis of cognitive and emotional impairments. Behavioral assessments involve evaluating patients' cognitive, emotional, and social functioning through standardized tests and questionnaires. These assessments provide objective measures of deficits caused by brain injuries and help in tracking recovery progress.

Clinical case studies involve in-depth examination of individual patients with brain injuries, analyzing their symptoms, medical history, and neuroimaging data. By studying individual cases, the Damasios gain valuable insights into the intricate relationships between brain regions, functions, and behavior, advancing our understanding of brain injury consequences and potential treatments.

To learn more about magnetic resonance imaging click here

brainly.com/question/32548787

#SPJ11

To find the minimum number of cans of paint Edward will need to paint all the doors, we first need to calculate the total area that needs to be painted. Each door has a front and a back, so there are 2 sides per Door .

The area of one side is the product of the width and length, which is 2.8 ft * 6.8 ft = 19.04 ft². Therefore, the total area for both sides of one door is 2 * 19.04 ft² = 38.08 ft².

Since Edward has 6 doors, the total area to be painted is 6 * 38.08 ft² = 228.48 ft².

Given that one can of paint covers 62.5 ft², we can calculate the minimum number of cans needed by dividing the total area by the coverage of one can: 228.48 ft² / 62.5 ft² = 3.6552.

Since we can't have a fraction of a can, Edward will need a minimum of 4 cans of paint to paint all the doors.

 To  learn  more  about fraction click here:brainly.com/question/10354322

#SPJ11

One mole of Li2C2O4 contains approximately 2.409 x 10^24 individual oxygen atoms.

To determine the number of individual oxygen atoms in one mole of Li2C2O4, we need to analyze the molecular formula of Li2C2O4 and consider the atomic composition of each element within it.The molecular formula of Li2C2O4 indicates that it contains two lithium (Li) atoms, two carbon (C) atoms, and four oxygen (O) atoms. Since there are four oxygen atoms present, we can calculate the number of individual oxygen atoms by multiplying the number of moles of Li2C2O4 by Avogadro's number (6.022 x 10^23 atoms/mol).The molar mass of Li2C2O4 can be calculated by summing the atomic masses of its constituent elements. The atomic mass of lithium (Li) is approximately 6.94 g/mol, carbon (C) is about 12.01 g/mol, and oxygen (O) is around 16.00 g/mol.

Molar mass of Li2C2O4 = (2 * atomic mass of Li) + (2 * atomic mass of C) + (4 * atomic mass of O)

                       = (2 * 6.94 g/mol) + (2 * 12.01 g/mol) + (4 * 16.00 g/mol)

                       = 13.88 g/mol + 24.02 g/mol + 64.00 g/mol

                       = 101.90 g/mol

Now, using the molar mass and Avogadro's number, we can determine the number of oxygen atoms in one mole of Li2C2O4:

Number of oxygen atoms = (4 * Avogadro's number) = (4 * 6.022 x 10^23 atoms/mol)

                             = 2.409 x 10^24 atoms

for such more questions on oxygen

https://brainly.com/question/28009615

#SPJ8

The cell potential (in V) is -1.56 V if the concentration of z₂ = 0.25 M and the concentration of q₃ = 0.36 M.

To determine the cell potential (in V) of a reaction involving two half-reactions, we need to use the Nernst equation:

Ecell = E°cell - (RT/nF) * ln(Q)

where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin, n is the number of electrons transferred in the reaction, F is Faraday's constant (96,485 C/mol), and Q is the reaction quotient.

For this problem, we need to write the two half-reactions and their corresponding standard reduction potentials:

z₂ + 2e- → z (E°red = -0.76 V)
q₃ + e- → q₂ (E°red = 0.80 V)

Note that the reduction potential for z₂ is negative, which means it is a stronger oxidizing agent than q₃, which has a positive reduction potential and is a stronger reducing agent. This information will be useful when interpreting the cell potential.

Next, we need to write the overall balanced equation for the reaction, which is obtained by adding the two half-reactions:

z₂ + q₃ → z + q₂

The reaction quotient Q is given by the concentrations of the products and reactants raised to their stoichiometric coefficients:

Q = [z][q₂] / [z₂][q₃]

Substituting the given concentrations, we get:

Q = (0.36)(1) / (0.25)(1) = 1.44

Now we can use the Nernst equation to calculate the cell potential:

Ecell = E°cell - (RT/nF) * ln(Q)
Ecell = (-0.76 V - 0.80 V) - (8.314 J/mol*K)(298 K)/(2*96,485 C/mol) * ln(1.44)
Ecell = -1.56 V

The negative value of Ecell indicates that the reaction is not spontaneous under these conditions (standard conditions would be 1 M concentrations for all species and 25°C temperature). In other words, a voltage source would need to be applied to the system in order to drive the reaction in the direction shown. The larger the magnitude of Ecell, the greater the driving force for the reaction.

In summary, the cell potential (in V) is -1.56 V if the concentration of z₂ = 0.25 M and the concentration of q₃ = 0.36 M.

To know more about cell potential, refer

https://brainly.com/question/19036092

#SPJ11

The given reaction is spontaneous.

The given reaction involves the reduction of Pd(II) ions to Pd metal along with the oxidation of H2 gas to H+ ions. The reduction potential of Pd(II) ions is higher than the reduction potential of H+ ions, which means Pd(II) ions have a greater tendency to accept electrons and get reduced to Pd metal. On the other hand, H+ ions have a greater tendency to lose electrons and get oxidized to H2 gas. Therefore, the reaction is thermodynamically favored and occurs spontaneously. The standard electrode potential for the reduction of Pd(II) ions to Pd metal is 0.987 V, which indicates that the reaction is highly favorable.

learn more about standard electrode

https://brainly.com/question/28302450

#SPJ11

The molecule that has polar bonds but is overall nonpolar is SO₃ (sulfur trioxide).

In SO₃, the S-O bonds are polar due to the electronegativity difference between sulfur (2.58) and oxygen (3.44) atoms. However, the three S-O bonds are arranged symmetrically around the central sulfur atom in a trigonal planar geometry, leading to the cancellation of the dipole moments of individual bonds. As a result, the molecule has a net dipole moment of zero, making it overall nonpolar.

Both H₂S and SO₂ are polar molecules, while O₃ (ozone) is a bent molecule with polar bonds and a net dipole moment, making it a polar molecule as well.

To know more about the net dipole moment refer here :

https://brainly.com/question/4510295#

#SPJ11

The volume of CO2 gas produced from 0.50 kg of dry ice at STP is 249 L.

To solve this problem, we can use the ideal gas law, which relates the volume, pressure, temperature, and amount of gas:

PV = nRT

where P is the pressure, V is the volume, n is the amount of gas in moles, R is the ideal gas constant, and T is the temperature in Kelvin.

At STP (standard temperature and pressure), the pressure is 1 atm and the temperature is 273 K. The ideal gas constant is 0.0821 L·atm/mol·K. We can use these values to calculate the volume of CO2 gas produced from 0.50 kg of dry ice:

First, we need to convert the mass of dry ice to moles of CO2. The molar mass of CO2 is 44.01 g/mol, so:

0.50 kg × (1000 g/kg) ÷ (44.01 g/mol) = 11.35 mol CO2

Next, we can use the balanced chemical equation to relate the moles of CO2 gas produced to the moles of dry ice used. From the equation CO2(s) → CO2(g), we can see that each mole of dry ice produces one mole of CO2 gas:

n(CO2 gas) = n(dry ice) = 11.35 mol CO2

Finally, we can use the ideal gas law to calculate the volume of CO2 gas produced:

PV = nRT

V = nRT/P

V = (11.35 mol)(0.0821 L·atm/mol·K)(273 K) / (1 atm)

V = 249 L

For more question on dry ice click on

https://brainly.com/question/30192582

#SPJ11

Under the condition step 2 the rate of determining step will be an expression for rate of decomposition of O₃ .

Option D is correct .

                             O₃ ⇒    O₂ + O

                              O + O₃    ⇒   2 O₂

rate = k[O][O₃] ----------------- 1

Kev = [O₂] [O] / [O₃]   [O]

Kev = [O₃] / [O₂]  -------------------------2

Rate = K .Kev [O₃] / [O₂] ₓ [O₃]

                                     rate = [O₃]²[O₂]⁻¹

order in O₃ will be = 2

order in O₂ will be -1

The physical environment (temperature, moisture, and soil properties), the quantity and quality of the dead material available to decomposers, and the microbial community itself all influence the rate of decomposition. rate=K[A]n[B]m denotes the rate law for a reaction between substances A and B. The ratio of the reaction's new rate to its earlier rate changes when A concentration is doubled and B's concentration is cut in half.

A huge number of elements can influence the disintegration interaction, expanding or diminishing its rate. Probably the most often noticed factors are temperature, dampness, bug action, and sun or shade openness. Covers can affect the decay cycle, and are tracked down regularly in criminological cases.

Learn more about rate of decomposition :

brainly.com/question/30609453

#SPJ4

The resulting product is potassium hypochlorite (KOCl), which is the conjugate base of hypochlorous acid (HOCl). Therefore, an aqueous solution of KOCl will be basic since it can accept protons to form the weak acid HOCl.

(b)We must figure out how many OH- ions are in the solution in order to compute the pH. Applying the formula, KOCl is a salt of a weak acid and a strong base.

[OH-] = Kw/[OCl-]

To determine the concentration of hypochlorite ions in the solution.

KOCl → K+ + OCl-

The concentration of OCl- ions in a 1.0 M solution of KOCl is also 1.0 M.

Substituting the values into the expression, we get:

[OH-] = Kw/[OCl-]

= (1.0 × 10^-14)/1.0

= 1.0 × 10^-14

Taking the negative logarithm

pOH = -log[OH-] = -log(1.0 × 10^-14) = 14

Since pH + pOH = 14, the pH of the solution is:

pH = 14 - pOH

= 14 - 14

= 0

Therefore, the pH of a 1.0 M solution of KOCl is 0, which means that the solution is highly basic.

Learn more on pH here https://brainly.com/question/22390063

#SPJ1

The first five amino acids of the protein are:- Methionine (Met), Leucine (Leu), Leucine (Leu), Proline (Pro), Glycine (Gly)

The first step to answering this question is to transcribe the DNA sequence into mRNA. This is done by replacing each occurrence of thymine (T) with uracil (U), since RNA uses uracil instead of thymine. Thus, the mRNA sequence for the given DNA sequence 5'-ATGCTGCCTCCGGGTCTCAGGTTAGTTAAGC-3' is:

5'-AUG CUG CUC CCG GGU CUC AGG UAG UUA AGC-3

The first step to answering this question is to transcribe the DNA sequence into mRNA. This is done by replacing each occurrence of thymine (T) with uracil (U), since RNA uses uracil instead of thymine. Thus, the mRNA sequence for the given DNA sequence 5'-ATGCTGCCTCCGGGTCTCAGGTTAGTTAAGC-3' is:

5'-AUG CUG CUC CCG GGU CUC AGG UAG UUA AGC-3'

The mRNA sequence can then be translated into a sequence of amino acids using the genetic code. The genetic code is a set of rules that defines how each codon (a sequence of three nucleotides) in mRNA is translated into an amino acid during protein synthesis.

The first three nucleotides in the mRNA sequence (AUG) is a start codon, which codes for the amino acid methionine. Therefore, the first amino acid in the protein is methionine.

To know more about Methionine (Met) refer here :-

https://brainly.com/question/2329477#

#SPJ11

The correct answer would be (a), the compound [Zn(OH₂)] is likely to be colorless.

Among the given compounds, [Zn(OH₂)] is likely to be colorless. Zinc (Zn) is a transition metal that commonly exhibits colorless or white compounds. The coordination complex [Zn(OH₂)] consists of a central zinc ion coordinated with water ligands (H₂O).

Since water is a relatively weak ligand, it does not cause any significant electronic transitions in the zinc ion, resulting in a lack of color.

On the other hand, [Cu(OH)] and [Fe(OH₂)] are likely to exhibit colors. Copper (Cu) and iron (Fe) are transition metals that often form colored compounds due to the presence of unpaired d electrons.

The presence of hydroxide ligands (OH) can also influence the electronic transitions in the metal ion, leading to the absorption and reflection of specific wavelengths of light, resulting in color.

In summary, the compound [Zn(OH₂)] is expected to be colorless, while [Cu(OH)] and [Fe(OH₂)] may exhibit colors due to the nature of the transition metal ions and the ligands involved.

Learn more about colorless

brainly.com/question/31497699

#SPJ11

The osmotic pressure of a solution made by dissolving 1.0 mol of FeCl3 into 1.0 kg of water would be four times as large compared to a solution made from 1.0 mol of glucose in 1.0 kg of water.

Osmotic pressure is directly proportional to the concentration of solute particles in a solution. In this case, the solution made from FeCl3 has one mole of solute particles, while the solution made from glucose also has one mole of solute particles. However, FeCl3 dissociates into four particles (one Fe3+ ion and three Cl- ions) when dissolved in water, while glucose does not dissociate and remains as one particle. Since osmotic pressure depends on the number of solute particles, the FeCl3 solution will have four times as many solute particles compared to the glucose solution. Therefore, the osmotic pressure of the FeCl3 solution will be four times as large as the osmotic pressure of the glucose solution.

To learn more about function, click here:

brainly.com/question/30721594

#SPJ11

The equilibrium constant expression for this reaction is Kc = [Pb^2+][Cl^-]^2 / [PbCl2].

The equilibrium constant of the chemical reaction can be defined as the value of reaction quotient at the chemical equilibrium, a state adopted by the dynamic chemical system after enough time has gone after which its composition has no measurable tendency to undergo further change. The expression of equilibrium constant can be expressed as the ratio of product of concentration of products raised to their power of coefficients respectively and individually and product of concentration of reactants raised to their power of coefficients respectively.

The equilibrium constant is denoted by Kc. For example, in the following reaction,

aA(aq) + bB(aq)-------> cC(aq) + dD(aq)

So, Kc = [C]^c [D]^d / [A]^a [B]^b

Hence, in the given reaction, the equilibrium constant expression turns out to be Kc = [Pb^2+][Cl^-]^2 / [PbCl2].

Learn more about equilibrium constant expression : https://brainly.com/question/26434138

#SPJ11

The balanced chemical equation in basic conditions is:

[tex]Ca^{2+}(aq) + C(s) + 2ClO^{2-}(g) = CaCO_3(s) + 2ClO^{2-}(aq) + H_2O(l)[/tex]

And the oxidation state of C in [tex]CaCO_3[/tex](s) is +4.

To balance the equation in basic conditions, we first balance the atoms that are not involved in redox reactions (Ca and Cl), then balance oxygen by adding [tex]H_2O[/tex], and finally balance hydrogen by adding OH- ions:

[tex]Ca^{2+}(aq) + C(s) + 2ClO^{2-}(g) = CaCO_3(s) + 2ClO^{2-}(aq) + H_2O(l)[/tex]

To determine the oxidation state of C in [tex]CaCO_3[/tex](s), we need to assign an oxidation state to each element in the compound according to a set of rules.

In general, the oxidation state of carbon (C) in a compound is calculated by assuming that all of the more electronegative elements in the compound (e.g. O) have their usual oxidation states (-2 for O), and then solving for the unknown oxidation state of C that makes the sum of the oxidation states equal to zero.

In [tex]CaCO_3[/tex](s), there are three O atoms, each with an oxidation state of -2. The overall charge of the compound is neutral, so the sum of the oxidation states must be zero:

(+2) + x + (-6) = 0

x = +4

For more question on balanced chemical equation click on

https://brainly.com/question/11904811

#SPJ11

According to the statement the vapor pressure of ethanol at 84.6 °C is approximately 56.6 mmHg.

To find the vapor pressure of ethanol at 84.6 °C, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = (-∆Hvap/R) x (1/T2 - 1/T1)
where P1 is the known vapor pressure at 45.9 °C (108 mmHg), P2 is the vapor pressure at 84.6 °C (what we're trying to find), ∆Hvap is the heat of vaporization (given as 39.3 kJ/mol), R is the gas constant (8.314 J/mol-K), T1 is the known temperature (45.9 °C + 273.15 K = 319.3 K), and T2 is the temperature we're trying to find (84.6 °C + 273.15 K = 357.3 K).
Plugging in these values and solving for P2, we get:
ln(P2/108) = (-39.3/(8.314))(1/357.3 - 1/319.3)
ln(P2/108) = -0.0386
P2/108 = e^-0.0386
P2 = 108 x e^-0.0386
P2 = 56.6 mmHg
Therefore, the vapor pressure of ethanol at 84.6 °C is approximately 56.6 mmHg.

To know more about vapor pressure visit :

https://brainly.com/question/11864750

#SPJ11

The red cabbage acid-base indicator from the previous pH lab would not work effectively as an indicator for a titration due to its broad color change range and lack of specificity. Red cabbage indicator displays different colors across a wide pH range, making it difficult to pinpoint the exact endpoint of a titration, which requires a precise and sharp color change.

Titration is a technique used to determine the concentration of an unknown solution by reacting it with a standard solution of known concentration. An ideal indicator for titration should have a well-defined and narrow color change range, preferably within a pH change of less than 1 unit, to accurately identify the endpoint.
In contrast, red cabbage indicator has a wide color change range, spanning from pH 2 (red) to pH 12 (yellow-green), which doesn't provide the required level of accuracy for titrations. The color transitions are also gradual and hard to distinguish, making it unsuitable for determining the exact endpoint in a titration.
Therefore, due to its broad and unspecific color change range, the red cabbage indicator from the previous pH lab is not suitable for use as an indicator in a titration experiment. Instead, indicators like phenolphthalein or bromothymol blue are typically used, as they provide a sharp and distinct color change at the titration endpoint.

Learn more about indicator here:

https://brainly.com/question/29842932

#SPJ11

When there are three linked atoms and two lone electron pairs surrounding a centre atom, the molecular geometry is said to be in the shape of a T. For a molecule with T-shaped molecular geometry, the ideal approximation of the bond angle is 90°.

In this geometry, the two lone pairs of electrons are also perpendicular to one another, and the bound atoms are situated in a plane perpendicular to them. The two lone pairs of electrons are positioned at 90 degrees to one another, occupying the two axial positions, while the three bound atoms are evenly spaced out from the central atom. The repulsion between the electron pair orbiting the central atom determines the bond angle. In this instance, the bond angle is 90° because there is more friction between the two lone pairs of electrons than there is between the bound atoms and the lone pairs.

For more such questions on electron

https://brainly.com/question/371590

#SPJ11

When there are three linked atoms and two lone electron pairs surrounding a centre atom, the molecular geometry is said to be in the shape of a T.

In this geometry, the two lone pairs of electrons are also perpendicular to one another, and the bound atoms are situated in a plane perpendicular to them. The two lone pairs of electrons are positioned at 90 degrees to one another, occupying the two axial positions, while the three bound atoms are evenly spaced out from the central atom. The repulsion between the electron pair orbiting the central atom determines the bond angle. In this instance, the bond angle is 90° because there is more friction between the two lone pairs of electrons than there is between the bound atoms and the lone pairs.

Learn more about electron here:

brainly.com/question/371590

#SPJ11

A mixture is a combination of many different elements that are not chemically combined and can be easily separated.

A mixture refers to a physical combination of two or more substances, where the individual components retain their chemical identities and properties. In a mixture, the substances are not chemically bonded together, allowing for their separation using various techniques.

Mixtures can exist in various forms, such as solid mixtures (e.g., a mixture of different types of sand), liquid mixtures (e.g., a mixture of alcohol and water), or gaseous mixtures (e.g., air, which is a mixture of nitrogen, oxygen, carbon dioxide, and other gases).

The constituents of a mixture can be separated based on their physical properties, including differences in size, density, solubility, boiling point, or magnetism. Common separation techniques include filtration, distillation, chromatography, and evaporation.

Unlike compounds, where the elements are chemically combined in fixed proportions, mixtures allow for variability in composition. The ratio of the different components in a mixture can vary, and the components can be present in different amounts. This flexibility and ease of separation distinguish mixtures from compounds, where the elements are chemically bonded together in specific ratios.

Learn more about chromatography here: https://brainly.com/question/31857177

#SPJ11

The 1.5 M KI(aq) solution has the highest concentration of the common ion, I-, which reduces the solubility of PbI2 by shifting the equilibrium towards the solid form.

The solubility of PbI2 would be lowest in a 1.5 M KI(aq) solvent mixture. This is because the common ion effect causes a decrease in solubility when a common ion (in this case, I-) is present in the solution.

The common ion effect states that the solubility of a salt is reduced when a common ion is present in the solution.

In the case of PbI2, the compound dissociates into lead ions (Pb2+) and iodide ions (I-) in an aqueous solution. When KI is added to the solution, it also dissociates into potassium ions (K+) and iodide ions (I-).

In a 1.5 M KI(aq) solvent mixture, the concentration of the iodide ion (I-) is high due to the presence of KI. The high concentration of the common ion I- leads to a decrease in the solubility of PbI2 through a shift in the equilibrium towards the solid form.

According to Le Chatelier's principle, the system will try to counteract the increase in the concentration of the iodide ion by shifting the equilibrium towards the formation of the solid PbI2.

The 1.5 M KI(aq) solution has the highest concentration of the common ion, I-, which reduces the solubility of PbI2 by shifting the equilibrium towards the solid form.

To learn more about concentration, refer below:

https://brainly.com/question/10725862

#SPJ11

The change in entropy when 15.0 g of acetone vaporizes at its normal boiling point is 22.8 J/K, expressed with three significant figures.

To calculate the change in entropy (ΔS) when acetone vaporizes, you need to use the formula ΔS = q/T, where q is the heat absorbed during the phase change and T is the temperature in Kelvin.

First, convert the boiling point of acetone from Celsius to Kelvin: T = 56.1 + 273.15 = 329.25 K.

Next, find the enthalpy of vaporization (ΔHvap) for acetone, which is 29.1 kJ/mol.

Now, you need to determine the number of moles (n) of acetone in 15.0 g.

The molar mass of acetone is 58.08 g/mol, so n = 15.0 / 58.08 ≈ 0.258 mol.

Calculate the heat absorbed during vaporization:

q = n * ΔHvap = 0.258 mol * 29.1 kJ/mol = 7.50 kJ. Remember to convert this to J: q = 7500 J.

Finally, calculate the change in entropy:

ΔS = q/T = 7500 J / 329.25 K = 22.8 J/K.

Learn more about entropy at

https://brainly.com/question/13135498

#SPJ11

The main answer to your question is that at 300 kelvin, the speed of sound through krypton is approximately 157.7 meters per second.

The speed of sound in a gas is determined by its temperature, molar mass, and the heat capacity ratio of the gas. The formula for calculating the speed of sound in a gas is:

v = sqrt(gamma * R * T / M)

where:
v = speed of sound
gamma = heat capacity ratio of the gas (for krypton, gamma is 1.67)
R = universal gas constant (8.314 J/mol*K)
T = temperature in kelvin
M = molar mass of the gas in kilograms per mole (for krypton, M is 0.0838 kg/mol)

Plugging in the given values:

v = sqrt(1.67 * 8.314 * 300 / 0.0838)
v = 157.7 m/s

Therefore, at 300 kelvin, the speed of sound through krypton is approximately 157.7 meters per second.

For more information on speed of sound visit:

https://brainly.com/question/15381147

#SPJ11