A soccer player strikes a soccer ball with a force of 550 N. If the player and the ball remain in contact for 0.03 s. What impulse was delivered to the ball by the player?

A dielectric fabric is used to split the conductive plates of a capacitor. This insulating cloth significantly determines the properties of a component. The dielectric constant of fabric determines the amount of strength that a capacitor can keep while voltage is applied.

A capacitor is an electrical component that attracts energy from a battery and stores the power. Internal, the terminals connect with metal plates separated by way of a non-engaging in substance. While activated, a capacitor quickly releases electricity in a tiny fraction of a 2d.

Capacitor, a tool for storing electric electricity, together with two conductors in near proximity and insulated from each different. A simple example of this sort of garage tool is the parallel-plate capacitor.

A capacitor is a tool that shops electric power in an electric-powered area. it is a passive digital thing with terminals. The effect of a capacitor is called capacitance.

Learn more about capacitors here https://brainly.com/question/13578522

#SPJ4

The total kinetic energy of the system after collision is 223.5J

In elastic collision kinetic energy and momentum are conserved.

According to the question

               mass of object a = 25kg

               mass of object b =  25 kg

        initial velocity of a u1 = 5.98 m/s

        initial velocity  of b u2 = 0

so from momentum conservation-

       mau1 + mbu2 = (m1+m2)v

       25kg × 5.98m/s + 25×0 = (25+25)v

              v = 2.99 m/s

Now the total kinetic energy after the collision will be:

          final kinetic energy = 1/2 (m1+m2) v²

                                           = 1/2 (25+25)× (2.99)²

                                           = 223.5 J

    Thus, total kinetic energy of the system after collision is 223.5J

Learn more about elastic collision here:

  https://brainly.com/question/1808045

    #SPJ4

❄ Hi there.

a pencil is composed mostly of wood.

Let's check if the other choices are right.

A. Sweaters are not made of wood

B. Tiles are not made of wood

C. Pencils are made of wood

D. Bricks are not made of wood

∴ the right choice is C.

❄

Mindspore accelerates model convergence through automatic parallelism and second-order optimization.

The statement is a)true.

Mind Expression, MindSpore frontend, which is used to compile duties from user source code to computational graphs, control execution at some point of schooling, preserve contexts (in non-sink mode), and dynamically generate graphs (in PyNative mode).

Using a distributed structure, MindSpore leverages a local differentiable programming paradigm and new AI local execution modes to attain higher aid performance, safety, and trustworthiness.

It consists of the Ascend collection chips, Atlas series hardware, CANN chip enablement, MindSpore AI framework, ModelArts, and MindX utility enablement.

Learn more about programming here: https://brainly.com/question/24833629

#SPJ4

The potential energy of the monkey at the given position is 600.9 J.

Potential energy is the energy stored in a body that depends upon the relative position of various parts of the body.

It increases with increase in the height of the object above the ground level.

The potential energy of the monkey is calculated as follows;

P.E = mgh

P.E = mg (L sin43)

where;

Substitute the given parameters and solve potential energy of the monkey

P.E = (16.9)(9.8)( 5.32 x sin 43)

P.E = 600.9 J

Thus, the potential energy of the monkey at the given position is 600.9 J.

Learn more about potential energy here: https://brainly.com/question/1242059

#SPJ1

The galaxy will be D = 84.96 km far away

Hubble's law, which says simply that a galaxy's velocity (or as is sometimes plotted, its redshift) is directly proportional to its distance, also tells us something important about the state of the universe. If the universe is static and unchanging, there should be no correlation between distance and velocity.

Recessional velocity is the rate at which an extragalactic astronomical object recedes (becomes more distant) from an observer as a result of the expansion of the universe. It can be measured by observing the wavelength shifts of spectral lines emitted by the object, known as the object's cosmological redshift.

V (r) = H * D + V pec

6000 = 69.8 * D + 70

5930 / 69.8 = D

D = 84.96 km

The galaxy will be D = 84.96 km far away

To learn more about Hubble's law here

https://brainly.com/question/10181633?referrer=searchResults

#SPJ4

As the diameter of the wire approaches to zero, the resisitance approaches  infinity.

Electrical resistance is the physical capacity of any body to oppose the flow of electric current even when there is an applied potential difference, capacity calculated by Ohm's First Law, and, according to the International System of Units (IS), is measured in ohms.

With that being said, and knonwing that:

R = Resistance; p = Resistivity; L = Length; d = Diameter

It is possible to calculate the resistance of the wire by:

[tex]R = p\frac{L}{A}[/tex]

Where A is calculated by:

[tex]A = \frac{\pi d^{2} }{4}[/tex]

Changing in the first formula:

[tex]R = p\frac{L}{\pi d^{2} } \\\\R = p\frac{4L}{\pi d^{2} }[/tex]

Knowing that when the diameter tends to zero resistance tends to infinity, it is possible to say that resistance of the wire will tend to infinity when the diameter approaches zero.

See more about eletromagnetism at: https://brainly.com/question/13407121

#SPJ1

Answer:

The resistance approaches infinity.

Explanation:

100% Correct

The phase that the second hand would be if the time were 30 seconds after 1:25pm is π radians.

Angular speed of the watch is given as;

ω = 1 rev/min = 2π rad /(60 s)

when the time is 30 seconds, the phase angle is calculated as;

θ = ωt

θ = (2π rad/60s) x 30 s

θ = π radians

Thus, the phase that the second hand would be if the time were 30 seconds after 1:25pm is π radians.

Learn more about phase angle here: https://brainly.com/question/7956945

#SPJ1

When amplitude of motion increases to 2a the time period remains the same.

The formula for spring mass system is given by

                          T = 2π√m/k

 where,            k = spring constant

                         m= mass of spring

                         T = time period

So, from here we get to know that time period is independent of amplitude, so we increase or decrease the amplitude of system there will be no effect on Time period of spring mass system.  

Thus, when amplitude of motion increases to 2a the time period remains the same.  

Learn more about spring mass system here:

  https://brainly.com/question/28042896

          #SPJ4

moisture in the air

Electrical engineer Jun Yao and microbiologist Derek Lovley have developed a device that uses a natural protein to create electricity from moisture in the air, a new technology they say could have significant implications for the future of renewable energy, climate change, and the future of medicine.

Air Generator," or “Air-Gen,” with electrically conductive protein nanowires produced by the microbe Geobacter, discovered by Lovley some years ago.

Learn more about Air Generator here:

https://brainly.com/question/25684373

#SPJ4

The magnifying power of this telescope is 12,5.

The telescope is an optical instrument that aims to allow the observation of large objects at long distances, such as galaxies, stars and planets. It consists of two parts: the objective, which can be a lens or a curved mirror, and the eyepiece, made up of a set of lenses.

With that being said and knowing that:

The focal length of the objective of a telescope (fo) = 75cm; The focal length of the eyepiece of a telescope (fe) = 6cm.

[tex]M = \frac{fo}{fe}[/tex]

Changing the values:

[tex]M = \frac{75}{6} = 12,5[/tex]

So, The magnifying power of this telescope is 12,5.

See more about astronomy at: brainly.com/question/5165144

#SPJ1

The heat needed to turn water into ice at zero degrees is expressed as mL = 1.70*333000 = 566100 J. specific heat of vaporization is necessary to raise its temperature.

a unit mass's transition from a liquid at its boiling point to a gas at the same temperature, measured in terms of heat. is the specific heat of vaporization

The quantity of energy (enthalpy) that must be added to a liquid substance in order to convert some of that substance into a gas is known as the heat of evaporation. At 100 °C, which is the boiling point of water, the specific heat of vaporization for water is about 540 cal/g.

It should be noted that even at lower temperatures, some water molecules—those that happen to have high kinetic energy—will escape from the water's surface. When temperatures reach a specific level, known as the crucial temperature, specific heat of vaporization totally disappears.

To learn more about the specific heat of vaporization please visit -
https://brainly.com/question/2427061
#SPJ4

If a Ferris wheel has a 15-m radius and completes five turns about its horizontal axis every minute then the acceleration of a passenger at his lowest point during the ride is 4.11 [tex]\text{m/s}^{2}[/tex].

Calculation:

Step-1:

It is given that the radius of the Ferris wheel is r=15 m, and the angular speed of the wheel is [tex]\omega[/tex]=5rev/min.

It is required to find the angular acceleration of a passenger at his lowest point during the ride.

The formula required to calculate the angular acceleration is, [tex]a=\omega ^2 r[/tex].

Step-2:

Now substituting the given values into the equation to get the value of the angular acceleration.

[tex]\begin{aligned}a &=\omega^{2} r \\&=(5 \mathrm{rev} / \mathrm{min})^{2}(15 \mathrm{~m}) \\&=\left(5 \mathrm{rev} / \mathrm{min} \times \frac{\left(\frac{2 \pi}{60}\right) \mathrm{rad} / \mathrm{sec}}{1 \mathrm{rev} / \mathrm{min}}\right)^{2}(15 \mathrm{~m}) \\&=(0.2741 \times 15) \mathrm{m} / \mathrm{s}^{2} \\&=4.11 \mathrm{~m} / \mathrm{s}^{2}\end{aligned}[/tex]

The acceleration is towards upwards that means towards the center of the wheel.

Learn more about the angular acceleration:

https://brainly.com/question/1592013

#SPJ4

Comparison of the range:

If a second projectile is launched with half of the initial velocity of the first projectile. The range of the second projectile is one-fourth of the first one.

Calculation:

Step-1:

It is given that the first particle has an initial velocity of [tex]v_0[/tex], and the second particle has an initial velocity of [tex]\frac{v_0}{2}[/tex]. It is required to compare the range of the second projectile with the first one.

It is known that the range of a projectile is calculated as,

[tex]R=\frac{u^{2} \sin 2 \theta}{g}[/tex]

Where u is the initial speed, g is the acceleration due to gravity, and [tex]\theta[/tex] is the angle at which the particle is thrown.

This problem [tex]\theta[/tex] is the same in both cases.

Step-2:

Therefore the range of the first projectile is,

[tex]R_1=\frac{v_0^{2} \sin 2 \theta}{g}[/tex]

The range of the second projectile is,

[tex]$$\begin{aligned}R_2&=\frac{(\frac{v_0}{2})^{2} \sin 2 \theta}{g}\\&=\frac{v_0^2\sin 2 \theta}{4g}\\\end{aligned}$$[/tex]

Therefore,

[tex]$$\begin{aligned}\\\frac{R_2}{R_1}&=\frac{1}{4}\\\Rightarrow R_2&=\frac{1}{4}R_1\\\end{aligned}\\$$[/tex]

Learn more about the range of a projectile here:

https://brainly.com/question/17016688

#SPJ4

On screen A the opaque disk cast a shadow that is completely dark at the center

opaque is defined as difficult to understand or not allowing light to pass through. The appearance of a black sheet of paper is an illustration of opaqueness. The study of astrophysics is an illustration of opaque.

An opaque object illuminated by a point source of light is said to produce a crisp shadow whose dimensions may be determined using geometry. This is according to geometric optics. The computation process is quite simple. Light beams are uniformly emitted from the source in all directions. These rays can be visualized as lines radiating straight out from the source. When a light source encounters an opaque object, the light rays cease moving away from the source.

To learn more about opaque please visit
https://brainly.com/question/10626808
#SPJ4

Magintude of Acceleration = 6 m/s -2

given - Initial velocity = 0

Time = 4s

Distance travelled = S = 48m

Acceleration = a = ?

Thus,

S= ut + 1/2 at2
The rate at which an object's speed changes, or the pace at which velocity changes, is known as acceleration. Newton's second law states that acceleration is inversely proportional to mass and directly proportional to the total sum of all forces acting on an item. It's simple math: if a thing is being pushed by a number of forces, you need to add them up (they may be acting in different directions), then divide the total force by the mass of the object.

To learn more about Acceleration please visit-
https://brainly.com/question/2303856

#SPJ1

The x component would be Ex = 412 x cos 49° = 270 N/C

Assume there is a small positive charge located at point P. By definition the magnitude of the electric field at point P due to charge Q1 is

E = kQ1/d2

where k is the coulomb constant and d is the straight line distance from Q1 to P.

The distance is the hypotenuse of the triangle formed by Q1, Q2, and P.

d = √0.065^2 + 0.075^2 = 0.099 m at an angle of θ = arctan 7.5/6.5 = 49°.

|E| = 8.99 x 10^9 Nm^2 C^-2 x 0.45 x 10^-9 C/ 0.099^2 m^2 = 412 n/C

The x component would be Ex = 412 x cos 49° = 270 N/C

Learn more about Electric field here:

https://brainly.com/question/14372859

#SPJ4

Answer: Pairs of conductors carrying current into or out of the power-supply components of electronic equipment are sometimes twisted together to reduce magnetic-field effects. This is for reducing the area of the loop and hence reducing the inductance and suffer less interference or improving electromagnetic compatibility.

Explanation:  To find the answer, we need to know more about Twisted pairs.

Thus, we can conclude that, the twisted pairs are used for reducing the area of the loop and hence reducing the inductance and suffer less interference or improving electromagnetic compatibility.

Learn more about the twisted pairs here:

https://brainly.com/question/28044850

#SPJ4

Work done is by the change in the potential energy of the system. The work done by gravity is 924.63 J.

Solution:

mass = 5.10 kg

height = 18.5 mm

We know that work done by the gravity on the watermelon is the change in the potential energy of the watermelon, therefore,

Work done due to gravity = change in the potential energy of the system

W = [tex]\Delta PE[/tex]

W = mg (h₀ - h₁)

W = 5.10 × 9.8 × 18.5

W = 924.63 J

know more about potential energy https://brainly.com/question/24284560

#SPJ4

The enantiomeric excess of (r)-mandelic acid in the mixture IS 80%.

The optical rotation of the mandelic acid was measured on a Perkin rotation of the optically active mandelic acid. Ethanol isn't always a suitable solvent for resolution due to the fact the salts are very soluble in it.

Enantiomers excess = (mixture/pure) × 100

                                 ⇒   excess enantiomers  = +120/+150 ×  100

                                 ⇒  excess enantiomers = 80%

A Racemic aggregate Is An equal aggregate Of two Enantiomers And Has a specific Rotation of 0° (Optically Inactive) the 2 components of “racemic acid” are (2S,3S)-tartaric acid, that is levorotatory, or (–); and (2R, 3R) tartaric acid, that is dextrorotatory.

Mandelic acid loosens the bonds that adhere the dead or antique pores and skin cells to the pores and skin surface. This allows the shedding of antiques.

The angle of rotation in ranges of the plane of polarization of a ray of monochromatic light that passes via a tube lengthy containing the substance.

Learn more about mandelic acid here:-https://brainly.com/question/14904908

#SPJ4

26.0898 rad/s is the angular velocity of a rotor in a blender.

Given

Initial velocity (ω₁) = 55.0 rad/s

Deceleration (α) = -40.7 rad/s²

Angle (θ) = 28.8 rad

Final angular velocity (ω₂) =?

According to the angular kinematic equation

ω₂² = ω₁² + 2αθ

Put the values of ω₁, α, and θ in the equation

We get,
ω₂² = (55)² + 2(₋40.7)(28.8)

ω₂² = √680.68

ω₂ = 26.0898 rad/s

Hence, 26.0898 rad/s is the angular velocity of a rotor in a blender after turning 28.8 rad.

Learn more about angular velocity here https://brainly.com/question/6860269

#SPJ1

X-axis represents the value of a particular characteristic; characteristics of an organism can include such traits as size and color.

A typical sort of distribution for a variable is the bell curve, commonly referred to as the normal distribution. The normal distribution graph, which has a symmetrical bell-shaped curve, is what gave rise to the phrase "bell curve."

The highest point on the curve, or the top of the bell, denotes the most likely outcome in a set of data (its mean, mode, and median), while all other potential outcomes are symmetrically distributed around the mean, resulting in a downward-sloping curve on each side of the peak. The bell curve's standard deviation provides information about its width.

The x-axis represents a variable's value, while the y-axis provides information about the likelihood that we will see that value.

I understand the question you are looking for is this:

In a bell-shaped curve, the x-axis (horizontal direction) of the graph represents which of the following?

a. The value of a particular characteristic; characteristics of an organism can include such traits as size and color.

b. The number of individuals

c. Time

Learn more about bell-shaped curve here:

https://brainly.com/question/24182600

#SPJ4

Answer:

Yes

Explanation:

The Earth is about 4x bigger than the moon. Scientists speculate that the moon was once part of Earth, until something hit the Earth, and broke off a large chunk of it. These pieces were flung off the Earth, and began to orbit it. Slowly, the pieces were mashed together by gravity, and formed the moon.

A photonic system exemplifying the biological neural process of spike timing dependent plasticity (STDP) is experimentally demonstrated using nonlinear polarization rotation. STDP represents the neuronal responses for learning based on input/output timing, order, and sequence.

according to the present synapse weight, we implement the optical spike timing dependent plasticity (STDP) with weight-dependent learning window in a VCSOA with double optical spike injections,

Learn more about Spike timing dependent plasticity here:

https://brainly.com/question/25736513

#SPJ4

Answer:

Here! Try this Website!: www.britannica.com › science › physical-science physical science | Definition, History, & Topics | Britannica. So you will learn a lot more about science, history, and topics about it!

Answer:i have no idea

Explanation:

A 52-newton tension force pulls down on the branch, and a 52-newton tension force pulls up on the bird feeder.

What is tension ?

The tension force is defined as the force that is transmitted through a rope, string or wire when pulled by forces acting from opposite sides. The tension force is directed over the length of the wire and pulls energy equally on the bodies at the ends.

Tension is the opposite of compression force. All the objects that are present in contact with each other exert a force on each other. The best example of a tension force can be seen while pulling a rope. When a pull force is applied to the rope, a significant amount of tension gets built.

Learn more about tension force here :-

https://brainly.com/question/2287912

#SPJ1

Answer:

R = ρ L / A       resistance of wire

ρC / ρA = [RC AC/ LC] / [RA AA/ LA} = AC / AA

Since resistance and length are the same for both wires where A is the area of the wire

ρC / ρA = rC^2 / rA^2        where r is the radius of the wire

(ρC / ρA)^1/2 = rC / rA

rC / rA = (1.72 / 2.83)^1/2

rC / rA = .780        radius of copper wire is .780 of aluminum wire

The acceleration Block A is derived as a= 11.983ft/s². See explanation below.

Recall that we are given the following:

Radium = 20 inches

Weight = 330lbs

Radius of gyration = 15in

Mass of Block = 110lb

The formula for Moment of Inertia is also given as:

I = mk²

= 330 [ 15/12]²

I = 515.625 lb/ft²

To derive the moment about O, we recourse to

∈M₀ = I∝

TR =  I∝

T [20/12] = 515.625 ∝

T = 309.375∝

Next, to derive the weight of the block A hanging freely,

Wa = MAg

= 110 x 32.2

= 3542 lbf

Acceleration is derived by

A = r∝

= [20/12] ∝

a = 1.667 ∝.........Lets call this equation 1

Value of the acceleration derived by Dalembert Principle

∈Fy = mAa

Wa-T = mAa

3542 - 309.375∝ = 110 x 1.667∝

3542 = 492.745∝

∝ = 7.8188 Rad/s²............Lets call this equation 2

Substituting the value of ∝ in equation 1, we have

a = 1.667∝

= 1.667 x 7.1883

a = 11.983 ft/s²

Learn more about acceleration:

https://brainly.com/question/460763
#SPJ1

Answer:

[tex]\huge\boxed{\sf F= 350 \ N}[/tex]

Explanation:

Considering pivot as the central point,

Key:

[tex]F_1r_1=F_2r_2[/tex]

Here,

Substitute the givens in the above formula.

[tex]F(1.2)=600(0.7)\\\\F(1.2)=420\\\\Divide \ 1.2 \ to \ both \ sides\\\\F=420/1.2\\\\F= 350 \ N\\\\\rule[225]{225}{2}[/tex]

The motor full load currents listed in NEC Tables 430.247 through 430.250 shall be used to determine the capacity of motor circuit conductors and short-circuit and ground-fault protection. This is further explained below.

Generally, Moving through an area of water or air where there is less movement than the water or air itself, an eddies

In conclusion, Using the full load currents indicated in NEC Tables 430.247 through 430.250, the capacity of motor circuit conductors and short-circuit and ground-fault protection for motors should be determined.

Read more about currents

https://brainly.com/question/13076734

#SPJ1