The energy needed to make the suspension bridge oscillate with an amplitude of 0.124 m is 1.04 × 10^5 J. It takes approximately 11.5 seconds for the bridge's oscillations to go from 0.124 m to 0.547 m amplitude.
The energy of oscillation in a system is given by the formula: E = (1/2)kA^2, where E is the energy, k is the effective force constant, and A is the amplitude of oscillation. Plugging in the given values, we get E = (1/2)(1.66 × 10^8 N/m)(0.124 m)^2 = 1.04 × 10^5 J. The natural frequency of oscillation for the bridge can be calculated using the formula: f = (1/2π)√(k/m), where f is the frequency, k is the effective force constant, and m is the mass. Since the mass is not given, we can assume it cancels out when comparing ratios. Thus, the ratio of frequencies is equal to the ratio of amplitudes, and we can use the formula: T2/T1 = A2/A1, where T is the time period and A is the amplitude. Rearranging the formula, we get T2 = (A2/A1) × T1. Plugging in the given values, we have T2 = (0.547 m/0.124 m) × T1 ≈ 11.5 s.
learn more about amplitude here:
https://brainly.com/question/9525052
#SPJ11
The problem that all visual merchandise work must solve to be effective is a. getting the viewer's attention b. using good art theory c. changing displays frequently d. buying and using mannequins
The problem that all visual merchandise work must solve to be effective is primarily getting the viewer's attention. This means that the display needs to be eye-catching, memorable, and engaging. This can be achieved through the use of color, lighting, contrast, and unique props. The display should also be relevant to the brand and its products.
While good art theory can certainly help in the creation of an effective display, it is not the most important factor. The focus should be on creating a display that connects with the viewer and communicates the brand's message. Changing displays frequently can also help to keep the viewer's attention, but this is not always necessary. A well-designed and executed display can be effective for an extended period of time.
Buying and using mannequins can be helpful in showcasing the brand's products, but they are not essential. Depending on the type of products being sold, other display techniques may be more effective. The key is to create a display that resonates with the viewer and communicates the brand's message in a clear and memorable way.
To know more about visual merchandise visit -
brainly.com/question/30156052
#SPJ11
A slingshot is used to launch a stone horizontally from the top of a 20. 0 meter cliff. The stone lands 36. 0 meters away
The stone was launched horizontally, so its initial vertical velocity is zero.
The angle of impact on the ground is 38.7° and the vertical component of the stone's velocity at impact is 22.4 m/s
When the stone is thrown horizontally from the top of a 20-meter cliff, it moves forward and then falls down to the ground due to the pull of gravity. The speed of the stone at launch is required to be determined, as well as the speed and angle of impact of the stone on the ground. To solve this problem, we will apply the kinematic equations. The horizontal displacement of the stone, which is 36.0 meters, is equal to the horizontal velocity of the stone multiplied by the time it took to travel the distance. The stone was launched horizontally, so its initial vertical velocity is zero. After it's launched, it falls down under the pull of gravity. Since the time of launch and the time of impact are the same, we can use the time the stone took to fall from the top of the cliff to the ground to calculate the initial velocity of the stone, which is 16.2 m/s. (The angle of impact on the ground is 38.7° and the vertical component of the stone's velocity at impact is 22.4 m/s) The velocity and angle of impact can also be calculated using the components of velocity, which are the horizontal and vertical velocities. The horizontal velocity of the stone remains constant throughout the motion and is equal to the initial horizontal velocity of the stone. The vertical velocity of the stone changes due to the pull of gravity. The vertical velocity of the stone at impact can be calculated using the time the stone took to fall from the top of the cliff to the ground and the acceleration due to gravity. The angle of impact can be calculated using the horizontal and vertical velocities of the stone.
learn more about vertical velocity Refer: https://brainly.com/question/11678836
#SPJ11
is the decay n→p β− ν¯¯¯e energetically possible?a. yesb. no
Yes, the decay n→p β− νe (neutron decaying to a proton, beta minus particle, and an electron antineutrino) is energetically possible. This process is known as beta minus decay and occurs in unstable atomic nuclei with excess neutrons.
The decay n→p β− ν¯¯¯e is indeed energetically possible. A neutron (n) decays into a proton (p), emitting a beta particle (β−) and an antineutrino (ν¯¯¯e) in the process. This decay occurs because the mass of the neutron is slightly greater than the mass of the proton, and the energy released from the decay accounts for the difference in mass. This is a long answer to your question, but it is important to understand the physics behind the decay process. The decay n→p β− ν¯¯¯e is possible because it conserves energy, electric charge, and lepton number. The neutron (n) is made up of one up quark and two down quarks, while the proton (p) is made up of two up quarks and one down quark.
To know more about proton visit :-
https://brainly.com/question/31760906
#SPJ11
A large reflecting telescope has an objective mirror with a 10.0m radius of curvature. What angular magnification does it produce when a 3.00 m focal length eyepiece is used? Draw a sketch to explain your answer.
The angular magnification produced by the large reflecting telescope with a 10.0m radius of curvature objective mirror and a 3.00m focal length eyepiece is not provided in the question.
The angular magnification of a telescope can be calculated using the formula:
M = - fo/fe
Where M is the angular magnification, fo is the focal length of the objective mirror and fe is the focal length of the eyepiece.
In this case, fo = 2R = 20.0m (since the radius of curvature is 10.0m) and fe = 3.00m. Substituting these values in the above formula, we get:
M = - (20.0m) / (3.00m) = -6.67
Therefore, the angular magnification produced by the large reflecting telescope is -6.67. A negative value indicates that the image produced by the telescope is inverted. The sketch below shows how the telescope produces an inverted image of the object being viewed.
For more questions like Telescope click the link below:
https://brainly.com/question/556195
#SPJ11
pl q6. what does the electric field look like within a parallel-plate configuration?pl q6. what does the electric field look like within a parallel-plate configuration?
The electric field within a parallel-plate configuration is uniform and perpendicular to the plates.
In a parallel-plate configuration, the electric field is generated by the potential difference between the plates. The electric field lines start from the positive plate and end on the negative plate, as charges move from higher potential to lower potential.
Since the plates are parallel and have the same magnitude of charge density, the electric field between them is uniform and directed perpendicular to the plates. This means that the electric field has the same magnitude and direction at every point between the plates.
The magnitude of the electric field E between the plates can be calculated using the formula:
E = V/d
where V is the potential difference between the plates and d is the distance between them.
In summary, the electric field within a parallel-plate configuration is uniform and perpendicular to the plates. This makes it a useful setup for many applications, such as capacitors and particle accelerators, where a constant electric field is required.
To know more about electric field, visit;
https://brainly.com/question/19878202
#SPJ11
An object moves in a direction parallel to its length with a velocity that approaches the velocity of light. The width of this object, as measured by a stationary observer...
approaches infinity.
approaches zero.
increases slightly.
does not change.
I know that the length, for the observer, is going to get smaller. But when they say "width" does that imply length? Or is the answer does not change because width is not the same as length?
The answer depends on how the width of the object is defined. If the width is defined as the distance between the two sides of the object perpendicular to the direction of motion,
Then it will be contracted or shortened due to length contraction. This means that for the observer, the width of the object will appear to decrease as the velocity of the object approaches the speed of light.However, if the width of the object is defined as the distance between the two sides of the object parallel to the direction of motion, then it will not be affected by the motion of the object. This is because length contraction only occurs along the direction of motion, not perpendicular to it. In this case, the answer would be "does not change".Therefore, the answer to the question depends on how the width of the object is defined. If the width is defined as the distance perpendicular to the direction of motion, then the answer is "approaches zero". If the width is defined as the distance parallel to the direction of motion, then the answer is "does not change
To know more about motion visit :
https://brainly.com/question/22810476
#SPJ11
what is the load factor for a plant with a total of 126,527 kwh and a billed demand of 212 kw? the billing period is 30 days long and the plant runs 24hrs/day.
The load factor for a plant with a total of 126,527 kwh and a billed demand of 212 kw is 83%. The billing period is 30 days long and the plant runs 24hrs/day.
A power plant's load factor is a gauge of how effectively it is being used over time. It is derived by dividing the average power demand throughout the billing period by the highest power demand. How to determine the load factor for the specified plant is as follows
total energy consumption during the billing period in kilowatt-hours (kWh):
126,527 kWh
the average power demand during the billing period in kilowatts (kW):
Average power demand = Total energy consumption / (Number of hours in the billing period)
= 126,527 kWh / (30 days x 24 hours/day)
= 176.06 kW
the maximum power demand during the billing period in kilowatts (kW):
Maximum power demand = Billed demand = 212
The load factor by dividing the average power demand by the maximum power demand:
Load factor = Average power demand / Maximum power demand
= 176.06 kW / 212 kW
= 0.83 or 83%
Therefore, the load factor for the given plant is 83%.
To know more about Load :
https://brainly.com/question/2288570
#SPJ1.
the time it takes to travel 40 miles varies inversely with the speed you are going. write an equation that relates time to the speed of your transportation.
To write an equation that relates time to the speed of transportation, we need to use the concept of inverse variation. Inverse variation means that as one variable increases, the other decreases, and their product remains constant.
In this case, the time it takes to travel 40 miles is inversely proportional to the speed at which you are going. This means that if you increase your speed, the time it takes to travel 40 miles will decrease, and vice versa.
Let's use the variables t and s to represent time and speed, respectively. We can write the equation as follows:
t = k/s
where k is a constant of variation that relates the two variables. If we multiply both sides of the equation by s, we get:
st = k
This equation shows that the product of speed and time remains constant at k. So if you increase your speed, the time it takes to travel 40 miles will decrease, and vice versa. For example, if you travel at a speed of 20 miles per hour, it will take you 2 hours to travel 40 miles. But if you increase your speed to 40 miles per hour, it will only take you 1 hour to travel the same distance.
In conclusion, the equation that relates time to the speed of transportation when the time it takes to travel 40 miles varies inversely with speed is t = k/s, where k is a constant of variation.
For more such questions on speed
https://brainly.com/question/13943409
#SPJ11
The equation that relates time to the speed of your transportation when traveling 40 miles.
Time = k/speed
where k is a constant of proportionality. This equation shows that as your speed increases, the time it takes to travel 40 miles decreases. Conversely, as your speed decreases, the time it takes to travel 40 miles increases. The equation also shows that the faster your transportation, the less time it takes to travel 40 miles, and vice versa.
To relate the time it takes to travel 40 miles with the speed of your transportation, we can use the inverse variation equation. The equation is:
Time = k / Speed
where "Time" is the time it takes to travel 40 miles, "Speed" is the speed of your transportation, and "k" is the constant of variation. Since we know the distance is 40 miles, we can modify the equation to:
40 = k / Speed
Visit here to learn more about variation equation:
brainly.com/question/29149263
#SPJ11
A 56.6g sample of aluminum, which has a specific heat capacity of 0.897·J·g−1°C−1, is put into a calorimeter (see sketch at right) that contains
100.0g of water. The temperature of the water starts off at 15.0°C. When the temperature of the water stops changing it's 23.1°C. The pressure remains constant at
1atm. Calculate the initial temperature of the aluminum sample. Be sure your answer is rounded to
2 significant digits.
The temperature of water will starts off at 15.0°C. When the temperature of the water stops changing it's 23.1°C. The pressure remains constant at 1atm. Then, the initial temperature of the aluminum sample was 32.3°C.
We can use the principle of conservation of energy to solve this problem. The energy lost by the aluminum as it cools down will be gained by the water as it heats up. We can express this in terms of heat;
Q_aluminum = -Q_water
where Q_aluminum is the heat lost by the aluminum and Q_water is the heat gained by the water.
We calculate the heat gained by the water using the formula;
Q_water = m_water × c_water × ΔT
where m_water is the mass of the water, c_water is the specific heat capacity of water (which is 4.184 J/g°C), and ΔT is the change in temperature of the water (which is 23.1°C - 15.0°C = 8.1°C).
Plugging in the values, we get;
Q_water = (100.0 g) × (4.184 J/g°C) × (8.1°C)
= 3392.4 J
Since the pressure remains constant, we can assume that the heat lost by the aluminum is equal to the heat gained by the water;
Q_aluminum = -Q_water = -3392.4 J
We can calculate the heat lost by the aluminum using the formula;
Q_aluminum = m_aluminum × c_aluminum × ΔT_aluminum
where m_aluminum is the mass of the aluminum, c_aluminum is the specific heat capacity of aluminum (which is 0.897 J/g°C), and ΔT_aluminum is the change in temperature of the aluminum (which is the difference between the initial temperature and the final temperature of the water).
Plugging in the values, we get;
-3392.4 J = (56.6 g) × (0.897 J/g°C) × (T_i - 23.1°C)
Solving for T_i, we get;
T_i = 32.3°C
Therefore, the initial temperature of the aluminum sample was 32.3°C.
To know more about aluminum sample here
https://brainly.com/question/23780164
#SPJ4
what is the density of kcl at 25.00 °c if the edge length of its fcc unit cell is 628 pm?
The density of KCl at 25.00 °C, with an edge length of 628 pm in its FCC unit cell is 4.904 g/L.
To calculate the density of KCl, we need to know the mass and volume of one unit cell of KCl.
Given that the edge length of the FCC unit cell of KCl is 628 pm, we can calculate the volume of one unit cell using the formula for the volume of a cube:
Volume of one unit cell = (edge length)^3 = (628 pm)^3
Now, we need to convert the volume to units of liters, since density is usually expressed in units of g/mL or g/cm^3.
1 pm = 1e-12 m (conversion factor)
(628 pm)^3 = (628 x 10^-12 m)^3 = 2.501 x 10^-28 m^3
1 m^3 = 1 x 10^27 pm^3 (conversion factor)
2.501 x 10^-28 m^3 = 2.501 x 10^-1^9 pm^3 = 2.501 x 10^-19 unit cells
Since KCl has a formula weight of 74.55 g/mol and the unit cell contains 4 KCl formula units, the mass of one unit cell of KCl can be calculated as follows:
Mass of one unit cell = (74.55 g/mol) x 4 / Avogadro's number = 0.001227 g
Now we can calculate the density of KCl at 25.00 °C using the following formula:
Density = Mass / Volume
Density = 0.001227 g / (2.501 x 10^-19 unit cells x 1.00 x 10^-3 L/unit cell)
Density = 4.904 g/L
Therefore, the density of KCl at 25.00 °C, with an edge length of 628 pm in its FCC unit cell is 4.904 g/L.
To learn more about density refer here:
https://brainly.com/question/29775886#
#SPJ11
a tow truck exerts a force of 3000 n on a car that accelerates at 2 m/s2. what is the mass of the car? 3000 kg 1500 kg 1000 kg 500 kg none of these
The mass of the car is 1500 kg.
So, the correct answer is B.
To answer your question, we'll use Newton's second law of motion, which states that Force (F) = Mass (m) x Acceleration (a).
The tow truck exerts a force of 3000 N on the car, and the car accelerates at 2 m/s².
We can rearrange the formula to find the mass: m = F/a.
Using the given values, we have m = 3000 N / 2 m/s². Upon calculating, we find that the mass of the car is 1500 kg.
So, the correct answer is B. 1500 kg.
Learn more about acceleration at
https://brainly.com/question/8707731
#SPJ11
direct imaging of exoplanets is currently most sensitive to: (a) rocky planets on close orbits. (b) rocky planets on wide orbits. (c) giant planets on close orbits. (d) giant planets on wide orbits.
Direct imaging of exoplanets is currently most sensitive to (d) giant planets on wide orbits.
This is because larger planets, like gas giants, reflect more light, making them easier to detect than smaller, rocky planets. Furthermore, planets on wide orbits are easier to discern from their host star, as the star's light is less likely to overwhelm the planet's light.
In contrast, rocky planets on close orbits (a) and giant planets on close orbits (c) are harder to detect due to their proximity to the star, while rocky planets on wide orbits (b) may be too small and faint to be easily observed. Advancements in technology and observational techniques continue to improve our ability to image exoplanets, but currently, the most favorable conditions for direct imaging involve large, widely-orbiting planets. So therefore (d) giant planets on wide orbits is direct imaging of exoplanets is currently most sensitive.
Learn more about gas giants here:
https://brainly.com/question/503999
#SPJ11
Assume there is NO friction between the bracket A and the ground or at the pulleys, but there IS friction between bracket A and mass B. Assume mass C is quite small. Pick the two correct statements. No matter how small the mass of C, the bracket will move. Only if the mass of C is large enough, the bracket A will move. The total force on the bracket is 2T to the right, where Tis the tension in the cable. Direction of friction on mass B is to the right.
The correct statements are: "No matter how small the mass of C, the bracket will move" and "Direction of friction on mass B is to the right."
The system consists of a bracket A, mass B, and a small mass C connected by a cable passing over two pulleys. There is no friction between the bracket and the ground or pulleys, but there is friction between the bracket and mass B.
When a force is applied to mass C, it accelerates, which causes the cable to move, and the bracket A and mass B move in opposite directions. Since there is friction between bracket A and mass B, the direction of friction will be opposite to the direction of motion of mass B, which is to the right.
As for the first statement, no matter how small the mass of C is, there will be some force applied to the cable, causing the bracket A to move. However, the acceleration of the bracket A will be smaller for smaller masses of C. Therefore, the first statement is correct.
Regarding the total force on the bracket, it is equal to the tension in the cable, T, which is acting in opposite directions on the bracket A and mass B. Therefore, the total force on the bracket is 2T to the left. However, the direction of friction on mass B is to the right, opposite to the direction of motion.
To know more about friction refer here:
https://brainly.com/question/28356847#
#SPJ11
If we increase the driving frequency in a circuit with a purely capacitive load, do (a) amplitude Vc and (b) amplitude I increase, decrease, or remain the same? If, instead, the circuit has a purely inductive load, do (c) amplitude V, and (d) amplitude 1, increase, decrease, or remain the same?
The amplitude of the current (I), however, will decrease, as the higher frequency results in a larger inductive reactance, leading to a decrease in current.
In a circuit with a purely capacitive load, if the driving frequency is increased, the amplitude of the voltage across the capacitor (Vc) will decrease.
This is because as the frequency increases, the capacitor has less time to charge and discharge, leading to a decrease in the voltage across it. The amplitude of the current (I) will increase, however, as the higher frequency results in a smaller capacitive reactance, leading to an increase in current.
In a circuit with a purely inductive load, if the driving frequency is increased, the amplitude of the voltage across the inductor (V) will increase.
This is because as the frequency increases, the inductive reactance increases, leading to an increase in voltage. The amplitude of the current (I), however, will decrease, as the higher frequency results in a larger inductive reactance, leading to a decrease in current.
To know more about inductive reactance, refer here:
https://brainly.com/question/12356566#
#SPJ11
(a) in the deep space between galaxies, the density of atoms is as low as 106 atoms/m3, and the temperature is a frigid 3.00 k. what is the pressure?
The pressure in deep space between galaxies with a density of 10^6 atoms/m^3 and temperature of 3.00 K is extremely low, on the order of 10^-17 Pa.
The pressure of a gas can be calculated using the ideal gas law, which relates the pressure, volume, temperature, and number of particles of a gas. However, in the case of deep space between galaxies, the density of atoms is so low that the ideal gas law is not applicable. Instead, we can use the kinetic theory of gases to estimate the pressure. According to this theory, the pressure of a gas is proportional to the density of particles and the average kinetic energy of the particles, which is related to the temperature. In deep space, the density of atoms is about 10^6 atoms/m^3, which is about a trillion times lower than the density of air at sea level on Earth. The temperature is also extremely low, at only 3.00 K, which is close to absolute zero. Plugging these values into the kinetic theory of gases gives a pressure on the order of 10^-17 Pa, which is almost impossible to measure with current technology.
Learn more about ideal gas:
https://brainly.com/question/14934878
#SPJ11
According to your instructor, the genius of Nominal Group Technique is that it removes from the crucial idea-generation phase of brainstorming Select one: O a social loafing Ob.communication ocentelechy O d. indifference o e hidden agendas Not yet answered Points out of 5.00
The genius of Nominal Group Technique is that it removes social loafing from the idea-generation phase of brainstorming.
Nominal Group Technique (NGT) is a structured approach to group brainstorming that aims to overcome the negative effects of group dynamics, such as social loafing, on idea generation. NGT involves individuals silently generating and ranking ideas, followed by group discussion and ranking of the ideas. This approach reduces social loafing, where some members may not contribute fully to the brainstorming session, as everyone is given equal opportunity to generate and share their ideas.
The result is a larger pool of ideas and a more focused discussion. NGT also allows for the identification of hidden agendas and the minimization of individual biases, as ideas are presented anonymously. Overall, NGT is an effective technique for improving the quality and quantity of ideas generated in group brainstorming sessions.
Learn more about brainstorming here:
https://brainly.com/question/26684333
#SPJ11
If a 0.4 kg baseball at 25 m/s straight into the air, how high does the ball go?
To determine how high the baseball will go, we can use the conservation of energy principle. At the start of its motion, the baseball has kinetic energy due to its speed. Baseball will reach a maximum height of approximately 160 meters.
As it rises, its speed decreases until it reaches a maximum height where its speed is zero. At this point, all of the initial kinetic energy has been converted into potential energy, which is stored in the gravitational field of the Earth.
The potential energy of an object near the Earth's surface is given by the formula: PE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height above some reference point.
Since the baseball is being thrown straight up into the air, it will eventually reach a maximum height where its velocity becomes zero.
At this point, all of its initial kinetic energy will have been converted into potential energy, so we can equate the two using the conservation of energy principle: KE = PE , 1/2 [tex]mv^2[/tex] = mgh
where m is the mass of the baseball, v is its initial velocity, g is the acceleration due to gravity, and h is the maximum height reached by the baseball. Substituting the given values, we get: 1/2 (0.4 kg) (25 m/s) = (0.4 kg) g h 625 J = 3.92 g h, h = (625 J) / (3.92 g) ≈ 160 m
Therefore, the baseball will reach a maximum height of approximately 160 meters. In summary, we can use the conservation of energy principle to determine the maximum height reached by the baseball.
By equating the initial kinetic energy of the baseball with its potential energy at maximum height, we can solve for the maximum height. In this case, the baseball will reach a height of approximately 160 meters.
Know more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
in one trial, the initial speed of cart a is 2.5 m s and the initial speed of cart b is 1.5 m s. the angle θ relative to east that the carts travel after the collision is most nearly(A) 22°(B) 36°(C) 45°(D) 54°(E) 62°
The angle θ relative to the east that the carts travel after the collision is most nearly (A) 22°.
To solve this problem, we need to use the concept of relative motion. When two objects collide, their speeds and directions change, but we can still analyze their motion relative to each other.
Let's assume that both carts are moving in the same direction before the collision. Cart A has an initial speed of 2.5 m/s, and cart B has an initial speed of 1.5 m/s. After the collision, the carts move off at an angle θ relative to east.
We can use the conservation of momentum to relate the velocities of the carts before and after the collision. The total momentum of the system before the collision is: p = m1v1 + m2v2
where m1 and m2 are the masses of the carts, and v1 and v2 are their initial speeds. Since the carts are moving in the same direction, we can add their velocities: p = (m1 + m2) * (v1 + v2)
After the collision, the total momentum is still conserved, but the velocities of the carts have changed. Let's assume that cart A moves off at an angle α relative to east, and cart B moves off at an angle β relative to east. Then we can write: p = m1va + m2vb
where va and vb are the final velocities of the carts. We can break these velocities down into their x and y components:
va,x = v1 cos α
va,y = v1 sin α
vb,x = v2 cos β
vb,y = v2 sin β
Since the carts move off at an angle θ relative to east, we can write:
α = 90° - θ/2
β = 90° + θ/2
Using these equations, we can solve for va and vb in terms of v1, v2, and θ:
va,x = v1 cos(90° - θ/2) = v1 sin(θ/2)
va,y = v1 sin(90° - θ/2) = v1 cos(θ/2)
vb,x = v2 cos(90° + θ/2) = -v2 sin(θ/2)
vb,y = v2 sin(90° + θ/2) = v2 cos(θ/2)
The total momentum equation becomes:
(m1 + m2) * (v1 + v2) = m1 * v1 sin(θ/2) + m2 * (-v2 sin(θ/2))
Simplifying this equation and solving for sin(θ/2), we get:
sin(θ/2) = (m1 + m2)/(m1 + m2 + m2 * v2/v1)
Plugging in the given values, we get:
sin(θ/2) = (2 + 3)/(2 + 3 + 3 * 1.5/2.5) = 0.385
Taking the inverse sine of this value, we get:
θ/2 = 22.1°
Multiplying by 2, we get:
θ = 44.2°
To know more about collision visit:
https://brainly.com/question/13138178
#SPJ11
We have 3kg of water at 10 degrees Celsius and we put a 1kg ball of aluminium at 30 degrees Celsius inside the water. Find what the final temperature will be if the specific heat capacity of water is 4200J/Kg C and the specific heat capacity of aluminium is 900J/Kg C.
Please help me out, thanks!
The final temperature will be if the specific heat capacity of water is [tex]4200J/Kg C[/tex] and the specific heat capacity of aluminum is [tex]900J/Kg C[/tex] is 13.5 degrees Celsius.
To illuminate this issue, we will utilize the rule of preservation of vitality. The entire sum of vitality sometime recently the two objects are in contact is break even with the overall sum of vitality after they are in warm harmony. This implies that the warm misplaced by the aluminum ball is break even with the warm picked up by the water.
The warm misplaced by the aluminum ball can be calculated utilizing the equation:
[tex]Q1 = m1 * c1 * (T1 - t-f)[/tex]
where Q1 is the warm misplaced by the aluminum ball, m1 is the mass of the aluminum ball,
c1 is the particular warm capacity of aluminum,
T1 is the introductory temperature of the aluminum ball,
and t-f is the ultimate temperature of the framework.
Substituting the values we have:
[tex]Q1 = 1kg * 900J/kg C * (30C - t-f)[/tex]
The warm picked up by the water can be calculated utilizing the equation:
[tex]Q2 = m2 * c2 * (T-F - t-f)[/tex]
where Q2 is the warm picked up by the water,
m2 is the mass of the water,
c2 is the particular warm capacity of water,
T2 is the introductory temperature of the water,
and t-f is the ultimate temperature of the framework.
Substituting the values we have:
[tex]Q2 = 3kg * 4200J/kg C * (T-f - 10C)[/tex]
Since Q1 = Q2, able to set the two conditions break even with each other:
[tex]1kg * 900J/kg C * (30C - t-f) = 3kg * 4200J/kg C * (t-f - 10C)[/tex]
Streamlining and fathoming for T-f, we get:
t-f = (3 * 4200 * 10 + 1 * 900 * 30) / (3 * 4200 + 1 * 900)
t-f = 13.5C
Subsequently, the ultimate temperature of the framework will be 13.5 degrees Celsius.
To know more about the final temperature refer to this :
https://brainly.com/question/22338034
#SPJ1
if x=15cm , does the laser beam refract back into the air through side b or reflect from side b back into the water?
If x=15cm, the laser beam will refract back into the air through side b.
Refraction occurs when a light beam passes through a boundary between two different mediums at an angle. In this case, the laser beam is traveling from water (with a refractive index of 1.33) to air (with a refractive index of 1.00) through the glass block. The angle of incidence at side a will be greater than the critical angle (approximately 48.75 degrees), causing the beam to refract back into the air through side b. Reflection would occur if the angle of incidence was less than the critical angle, but in this scenario, the angle is greater.
The laser beam will refract back into the air through side b. When a laser beam travels from one medium to another with different refractive indices, such as from water to air, it will experience refraction. In this case, as the laser beam moves from the denser medium (water) to the less dense medium (air) through side b, the beam will refract away from the normal, allowing it to pass back into the air.
To know more about visit
https://brainly.com/question/4218151
#SPJ11
A 0. 2 kg cart is released from rest at the top of a frictionless ramp with a height of 1. 4 meters. State the initial type of energy in the cart-Earth system when the cart is released at the top of the ramp
When the cart is released at the top of the ramp, the initial energy of the cart-earth system is potential energy.
The initial energy of the cart-earth system is potential energy.Potential energy is the energy possessed by an object due to its position or state, which enables it to do work when it is transformed to another form of energy such as kinetic energy. It is usually expressed in joules (J).For instance, a 0.2 kg cart placed on the top of a frictionless ramp with a height of 1.4 meters will have potential energy due to its position. The potential energy formula is PE=mgh, where m is mass, g is gravity, and h is height. Thus, using the formula, the potential energy of the cart-earth system can be calculated as:PE=mgh=0.2 kg * 9.8 m/s² * 1.4 m=2.76 J .The potential energy will be converted to kinetic energy as the cart moves down the ramp. The final velocity of the cart at the bottom of the ramp can be calculated using the conservation of energy equation:PE = KEmgΔh = ½mv²v = sqrt (2gh)v = sqrt (2(9.8 m/s²)(1.4 m))v = 3.76 m/s .Therefore, when the cart is released at the top of the ramp, the initial energy of the cart-earth system is potential energy.
LEARN MORE ABOUT potential energy REFER: https://brainly.com/question/24284560
#SPJ11
An electric water heater consumes 7.13 kw for 3.10 h per day. what is the cost (in dollars per year) of running it for one year if electricity costs 13.6 cents/(kw · h)?
To calculate cost of running the electric water heater for one year, we need to first calculate total energy consumed in kilowatt-hours (kWh) per year, and multiply it by cost per kWh. cost of running electric water heater for one year at a rate of 7.13 kW would be $1,096.34 per year.
The electric water heater consumes 7.13 kW for 3.10 hours per day, so the energy consumed per day is: Energy per day = Power x Time = 7.13 kW x 3.10 h = 22.123 kWh
To calculate the energy consumed per year, we can multiply the energy consumed per day by the number of days in a year: Energy per year = Energy per day x Days per year = 22.123 kWh/day x 365 days/year = 8,069.495 kWh/year
Next, we can calculate the cost of running the electric water heater for one year by multiplying the energy consumed per year by the cost per kWh:
Cost per year = Energy per year x Cost per kWh = 8,069.495 kWh/year x 0.136 dollars/kWh = 1,096.34 dollars/year
Therefore, the cost of running the electric water heater for one year at a rate of 7.13 kW for 3.10 hours per day, with electricity costing 13.6 cents/(kW·h), would be approximately $1,096.34 per year.
Know more about water heater here:
https://brainly.com/question/29512440
#SPJ11
.18 the value of p0 in silicon at t 300 k is 2 1016 cm3 . (a) determine ef ev. (b) calculate the value of ec ef. (c) what is the value of n0? (d) determine efi ef
(a) 0.56 eV (b) The value of ec ef is 1.12 eV (c) The value of n0 is [tex]10^{10}[/tex] [tex]cm^{-3[/tex] (d) 0.31 eV above the valence band.
(a) The value of ef - ev can be determined by using the equation Ef = (Ev + Ec)/2 + (kT/2)ln(Nv/Nc), where Ev is the energy of the valence band, Ec is the energy of the conduction band, k is the Boltzmann constant, T is the temperature in Kelvin, and Nv/Nc is the ratio of the effective density of states in the valence band to that in the conduction band. Plugging in the given values, we get Ef - Ev = 0.56 eV.
(b) The value of ec - Ef can be calculated using the equation Ec - Ef = Ef - Ev, which gives us Ec - Ef = 1.12 eV.
(c) The value of n0 can be found using the equation n0 = Nc exp(-(Ec - Ef)/kT), where Nc is the effective density of states in the conduction band. Plugging in the given values, we get n0 = [tex]10^{10} cm^{-3}.[/tex]
(d) The value of efi - Ef can be determined using the equation efi - Ef = kTln(n/ni), where ni is the intrinsic carrier concentration. Plugging in the given values, we get efi - Ef = 0.31 eV above the valence band.
For more such questions on valence band, click on:
https://brainly.com/question/16050766
#SPJ11
identical currents are carried in two circular loops; however, one loop has twice the diameter as the other loop. compare the magnetic fields created by the loops at the center of each loop
The magnetic field created by the smaller loop will be stronger than the magnetic field created by the larger loop at the center of each loop.
The magnetic field created by a current-carrying loop of wire
B = (μ0 * I * A) / (2 * r)
B = magnetic field
μ0= permeability of free space
I = current
A = area of the loop
r = distance from the center of the loop
In this situation, I is the same for both loops because we have two identical currents. The larger loop's radius is larger than the smaller loop's due to the larger diameter. As a result the larger loop's larger distance from its center than the smaller loop's smaller distance.
According to the formula the magnetic field is directly proportional to the loop's area and inversely proportional to the distance from the loop's center.
The magnetic field at the center of the larger loop will be four times weaker than the magnetic field at the center of the smaller loop because the area of the larger loop is proportional to the square of the radius while the distance from the center is only twice as great.
Learn more about magnetic field at:
brainly.com/question/11514007
#SPJ4
A softball player swings a bat, accelerating it from rest to 2.6rev/s in a time of 0.20s . Approximate the bat as a 0.90-kg uniform rod of length 0.95 m, and compute the torque the player applies to one end of it.
A softball player swings a bat, accelerating it from rest to 2.6rev/s in a time of 0.20s. Approximate the bat as a 0.90-kg uniform rod of length 0.95 m, the torque applied by the softball player to one end of the bat is approximately 4.46 Nm.
To compute the torque, we first need to find the angular acceleration (α) of the bat. We can use the formula α = (ωf - ωi) / t, where ωf is the final angular velocity (2.6 rev/s), ωi is the initial angular velocity (0 rev/s), and t is the time (0.20 s). Converting rev/s to rad/s, we get ωf = 2.6 * 2π = 16.34 rad/s. Now, α = (16.34 - 0) / 0.20 = 81.7 rad/s².
Next, we find the moment of inertia (I) of the bat, considering it as a uniform rod, using the formula I = (1/3)ML², where M is the mass (0.90 kg) and L is the length (0.95 m). So, I = (1/3)(0.90)(0.95)² = 0.271875 kg.m².
Finally, we compute the torque (τ) using the formula τ = Iα. Hence, τ = 0.271875 * 81.7 = 4.46 Nm (approximately).
Learn more about torque here:
https://brainly.com/question/31248352
#SPJ11
A charge of 0. 05 C moves a negative charge upward due to a 2 N force exerted by an electric field. What is the magnitude and direction of the electric field? 0. 03 upward 0. 03 downward 40 upward 40 downward.
The magnitude of the electric field is 40 N/C, and its direction is downward.
The force exerted by an electric field on a charged particle is given by the equation F = qE, where F is the force, q is the charge, and E is the electric field strength. In this case, the force is given as 2 N and the charge is 0.05 C. Therefore, we can rearrange the equation to solve for the electric field strength: E = F/q = 2 N / 0.05 C = 40 N/C. The negative charge moves upward, which means it experiences a force in the opposite direction. Hence, the electric field must be directed downward. The magnitude of the electric field is 40 N/C, and its direction is downward.
learn more about electric here:
https://brainly.com/question/15449094
#SPJ11
An electron is accelerated from rest to 3.0×106m/s in 9.0×10^−8s.A. What distance did the electron travel in this time interval?B.What is its average acceleration? The direction of the unit vector ı^ is the direction of motion of the electron.
Answer: The distance traveled by the electron in this time interval is 1.215×10⁻¹³ meters.
Explanation: A. To determine the distance traveled by the electron, we can use the kinematic equation: 1.215×10⁻¹³.
The average acceleration is 3.33×10¹³ m/s², and the indirection of the unit vector ı^ is the direction of motion of the electron.
d = v_i × t + (1/2)×a × t²
where d is the distance traveled, v_i is the initial velocity (which is zero in this case), t is the time interval, and a is the acceleration.
Substituting the given values, we get:
d = 0 + (1/2) × (3.0×10⁶ m/s²) × (9.0×10⁻⁸ s)² = 1.215×10⁻¹³ meters
Therefore, the electron traveled a distance of 1.215×10⁻¹³meters in this time interval.
B. The average acceleration can be calculated using the equation:
a_avg = (v_f - v_i) / t
where v_f is the final velocity, v_i is the initial velocity, and t is the time interval.
Substituting the given values, we get:
a_avg = (3.0×10⁶ m/s - 0 m/s) / (9.0×10^−8 s) = 3.33×10¹³ m/s²
The direction of the unit vector ı^ is the direction of motion of the electron, which in this case is in the direction of the acceleration. Therefore, the electron's average acceleration is 3.33×10^13 m/s² in the direction of the unit vector ı^.
To learn more about acceleration visit:https://brainly.com/question/460763
#SPJ11
a. by how much does the volume reading increase when the brass block is placed in the cylinder? (assume that no water leaves the cylinder.) explain.
The increase in volume reading when the brass block is placed in the cylinder is equal to the volume of liquid displaces by the object. This is defined by the Archimedes principle.
The upward buoyant force is exerted on an object when the object is fully or partially immersed in the fluid. The buoyancy force is equal to the weight of the fluid that the body displaces and this force always acts in the upward direction. This is called as Archimedes principle.
It states that the magnitude of buoyancy force exerted on the object by a liquid is equal to the weight of the volume of the liquid displaced by the object. When a brass block is immersed in the liquid, the level of water increases depending on the weight of the brass.
To learn more about Archimedes' principles:
https://brainly.com/question/787619
#SPJ1
A particle of mass 5.0 kg has position vector at a particular instant of time when i…
A particle of mass 5.0 kg has position vector at a particular instant of time when its velocity is with respect to the origin. (a) What is the angular momentum of the particle?
(b) If a force acts on the particle at this instant, what is the torque about the origin?
(a) Angular momentum = mass x velocity x perpendicular distance from origin.
(b) Torque = force x perpendicular distance from origin.
(a) The angular momentum of the particle is given by the cross product of its position vector and its velocity vector, i.e. L = r x p, where r is the position vector and p is the momentum (mass x velocity).
The magnitude of L is equal to the product of the magnitude of r, the magnitude of p, and the sine of the angle between r and p.
Since the velocity vector is perpendicular to the position vector in this case, the sine of the angle is 1, and the magnitude of L is simply the product of the mass, velocity, and perpendicular distance from the origin.
(b) The torque about the origin due to the force acting on the particle is given by the cross product of the position vector and the force vector, i.e. τ = r x F, where r is the position vector and F is the force vector.
The magnitude of τ is equal to the product of the magnitude of r, the magnitude of F, and the sine of the angle between r and F.
The perpendicular distance from the origin is also a factor, since torque depends on the perpendicular distance between the force and the origin.
For more such questions on Angular, click on:
https://brainly.com/question/25279049
#SPJ11
(a) Angular momentum = mass x velocity x perpendicular distance from origin.
(b) Torque = force x perpendicular distance from origin.
(a) The angular momentum of the particle is given by the cross product of its position vector and its velocity vector, i.e. L = r x p, where r is the position vector and p is the momentum (mass x velocity).
The magnitude of L is equal to the product of the magnitude of r, the magnitude of p, and the sine of the angle between r and p.
Since the velocity vector is perpendicular to the position vector in this case, the sine of the angle is 1, and the magnitude of L is simply the product of the mass, velocity, and perpendicular distance from the origin.
(b) The torque about the origin due to the force acting on the particle is given by the cross product of the position vector and the force vector, i.e. τ = r x F, where r is the position vector and F is the force vector.
The magnitude of τ is equal to the product of the magnitude of r, the magnitude of F, and the sine of the angle between r and F.
The perpendicular distance from the origin is also a factor, since torque depends on the perpendicular distance between the force and the origin.
Visit to know more about Angular:-
brainly.com/question/25279049
#SPJ11
a piano string of mass per unit length 0.00587 kg/m is under a tension of 1910 n. find the speed with which a wave travels on this string. answer in units of m/s.
The speed with which a wave travels on the given piano string is approximately 73.4 m/s.
The speed of a wave on a string is given by the square root of the tension divided by the linear mass density of the string. Using the given values, we can calculate the speed as follows:
Wave speed = sqrt(tension/linear mass density)
Linear mass density = mass per unit length = 0.00587 kg/m
Tension = 1910 N
Substituting these values into the formula, we get:
Wave speed = sqrt(1910 N / 0.00587 kg/m) = 73.4 m/s
Therefore, the speed with which a wave travels on the piano string is 73.4 m/s.
Learn more about speed
brainly.com/question/28224010
#SPJ11