A unit has just crossed through a thickly vegetated area, and they have come upon a more open terrain. They should:
a. move in file
b. move in wedge
c. double time
d. high crawl

The longest wavelength of light that will produce photoelectrons from potassium is approximately 310 nm.

This wavelength corresponds to the threshold energy required to overcome the work function of potassium and release electrons via the photoelectric effect. The photoelectric effect occurs when photons of light strike a material, causing the ejection of electrons. The minimum energy required to liberate electrons is determined by the work function of the material. For potassium, the work function is around 2.24 eV. By converting this energy to wavelength using the formula E = hc/λ (where E is energy, h is Planck's constant, c is the speed of light, and λ is the wavelength), we find that the longest wavelength is approximately 310 nm. At wavelengths longer than this, the energy of the photons is insufficient to produce photoelectrons from potassium.

learn more about wavelength here:

https://brainly.com/question/31143857

#SPJ11

The renal hilum lies on the medial surface of the kidney. The renal hilum is the area on the kidney where the renal artery, renal vein, and ureter enter or exit.

It is located on the concave medial surface of the kidney, which faces towards the vertebral column. The renal hilum is an important site for surgical access to the kidney and is also the location where the renal pelvis, which is the expanded upper end of the ureter, exits the kidney. The position of the renal hilum on the medial surface of the kidney also allows for the formation of the renal sinus, which is a cavity that contains blood vessels, lymphatic vessels, and nerves.

Learn more about kidney here;

https://brainly.com/question/31058361

#SPJ11

The mass of the solid gold rectangular bar is approximately 13.3 kg. To calculate the mass of the solid gold rectangular bar, we need to use the formula: mass = density x volume

First, we need to convert the dimensions of the bar from centimeters to meters: length = 3.00 cm = 0.03 m width = 10.0 cm = 0.1 m                                       height = 23.0 cm = 0.23 m
Next, we can calculate the volume of the bar:
volume = length x width x height
volume = 0.03 m x 0.1 m x 0.23 m
volume = 0.00069 m3

Now, we can plug in the density of gold and the volume we just calculated into the mass formula:
mass = density x volume
mass = 1.93 x 10^4 kg/m3 x 0.00069 m3
mass = 13.317 kg

To know more about dimensions visit :-

https://brainly.com/question/30338188

#SPJ11

The maximum oxidation state observed for titanium is +4. This is because titanium has four valence electrons and can lose all of them to form Ti4+ ion, which has a noble gas electron configuration of argon.

The maximum oxidation state observed for technetium is larger than the value for titanium.

Technetium is a radioactive element that exhibits a wide range of oxidation states, ranging from -1 to +7.

The most stable and commonly observed oxidation state of technetium is +7, which is larger than the maximum oxidation state observed for titanium.

This is due to the fact that technetium has a higher atomic number and therefore has more electrons available for bonding and oxidation.

Read more about the Oxidation state.

https://brainly.com/question/11313964

#SPJ11

Answer:We can use the formula:

P = V(rms) * I(rms)

where P is the power, V(rms) is the rms voltage, and I(rms) is the rms current.

First, we need to convert the power from MW to W:

40 MW = 40,000,000 W

Next, we can rearrange the formula to solve for I(rms):

I(rms) = P / V(rms)

Substituting the given values:

I(rms) = 40,000,000 W / 75,000 V = 533.33 A

Therefore, the rms current in the transmission lines is 533.33 A.

learn more about rms current

https://brainly.com/question/30097489?referrer=searchResults

#SPJ11

To determine the tension required to achieve a specific number of vibrations per second for a transverse wave, we can use the formula for wave speed:

v = λ * f

where:

v is the wave speed,

λ is the wavelength, and

f is the frequency.

In this case, we are given the wavelength (λ) as 3.23 cm and the frequency (f) as 625 vibrations per second.

First, let's convert the wavelength to meters:

λ = 3.23 cm = 3.23 * 10^(-2) m

Next, we can rearrange the formula to solve for the wave speed (v):

v = λ * f

Substituting the given values:

v = (3.23 * 10^(-2) m) * (625 s^(-1))

v = 2.01875 m/s

The wave speed is related to the tension (T) in the medium by the following equation for transverse waves:

v = sqrt(T/μ)

where:

v is the wave speed,

T is the tension in newtons, and

μ is the linear mass density of the medium.

To solve for T, we need to know the linear mass density of the medium, which is not provided in the question. Without this information, we cannot calculate the exact tension required to achieve the given frequency and wavelength.

To know more about wavelength refer here

https://brainly.com/question/31143857#

#SPJ11

The answer is "does not change."

In this context, "width" is usually interpreted as the dimension perpendicular to the direction of motion, while "length" is parallel to it.

So when an object moves at relativistic speeds, its length contracts along the direction of motion, while its width and height (perpendicular to the direction of motion) are not affected.

"Dimension perpendicular" refers to a dimension that is orthogonal or at right angles to another dimension.  In physics, it is common to describe the three dimensions of space as x, y, and z axes, which are all perpendicular to each other.

In general, perpendicular dimensions are independent of each other and do not affect one another. Therefore, the width of the object as measured by a stationary observer does not change.

To know more about relativistic speeds click here:

https://brainly.com/question/29569445#

#SPJ11

We can prove that it is decidable whether a Turing machine M, on input w, ever attempts to move its head past the right end of the input string w by constructing a new Turing machine M' that simulates M on input w, and keeps track of the position of the head during the simulation.

The high-level description of M' is as follows

1 Copy the input string w onto a separate tape.

2 Initialize a counter c to 0.

3 Simulate M on w using the standard Turing machine simulation procedure, while keeping track of the position of the head at each step.

4 If the head attempts to move past the right end of the input string, increment the counter c by 1.

5 Continue simulating M until it halts.

6 If M halts in an accepting state, accept; otherwise, reject.

Since M' simulates M on input w, it will halt if and only if M halts on input w. If M attempts to move its head past the right end of w, M' will increment the counter c, which keeps track of this event. Therefore, after simulating M on w, M' can examine the value of c to determine whether M attempted to move its head past the right end of w.

Since the simulation of M on w can be performed by a Turing machine, and the operation of incrementing c is a basic arithmetic operation that can be performed by a Turing machine, the entire operation of M' can be performed by a Turing machine. Therefore, M' is a Turing machine that decides whether M, on input w, ever attempts to move its head past the right end of w.

Therefore, it is decidable.

To know more about Turing machine here

https://brainly.com/question/15966626

#SPJ4

A low-pass RC filter has a crossover frequency fc = 600 Hz. fc will be halved if the resistance R is doubled.

Part A: If the resistance R is doubled in a low-pass RC filter, the crossover frequency fc will be halved.

Therefore, fc will be 300 Hz (units: Hz).

Part B: If the capacitance C is doubled in a low-pass RC filter, the crossover frequency fc will be halved.

Therefore, fc will be 300 Hz (units: Hz).

Part C: The peak emf En does not affect the crossover frequency fc of a low-pass RC filter. Therefore, doubling the peak emf En will not change the value of fc.

The answer is still the same as in Part A, which is fc = 300 Hz.

To know more about resistance here

https://brainly.com/question/31747325

#SPJ4

The electric flux through the top surface of the cube is approximately 1.16 × 10³ N·m²/C.

To find the electric flux through the top surface of the cube, we will use Gauss's Law. The equation for Gauss's Law is:

Φ = Q / ε₀

where Φ represents the electric flux, Q is the charge enclosed (31.0 nC, or 31.0 × 10⁻⁹ C), and ε₀ is the vacuum permittivity constant (8.85 × 10⁻¹² C²/N·m²).

Since the charge is at the center of the cube, the flux will be evenly distributed through all six faces of the cube. To find the electric flux through the top surface, we simply need to divide the total flux by 6:

Φ_top_surface = (Q / ε₀) / 6

Φ_top_surface = (31.0 × 10⁻⁹ C) / (8.85 × 10⁻¹² C²/N·m²) / 6

After calculating the values, we get:

Φ_top_surface ≈ 1.16 × 10³ N·m²/C

The electric flux is approximately 1.16 × 10³ N·m²/C.

Learn more about Gauss's Law here: https://brainly.com/question/14773637

#SPJ11

The liquid's index of refraction is approximately 1.555.

determine the liquid's index of refraction given that a laser beam in air is incident on the liquid at an angle of 40.0° with respect to the normal and the laser beam's angle in the liquid is 24.0°.

To find the liquid's index of refraction, you can use Snell's Law:

n1 * sin(θ1) = n2 * sin(θ2)

where n1 and θ1 represent the index of refraction and angle of incidence for the first medium (air), and n2 and θ2 represent the index of refraction and angle of incidence for the second medium (liquid).

Convert angles to radians.
θ1 = 40.0° * (π/180) = 0.6981 radians
θ2 = 24.0° * (π/180) = 0.4189 radians

Use Snell's Law to solve for n2 (the liquid's index of refraction). The index of refraction for air, n1, is approximately 1.

1 * sin(0.6981) = n2 * sin(0.4189)

Step 3: Solve for n2.
n2 = sin(0.6981) / sin(0.4189) ≈ 1.555

So, The liquid's index of refraction is approximately 1.555.

Learn more about liquid's index of refraction

brainly.com/question/30111419

#SPJ11

Answer:

The wave speed is given by:

v = √(T/μ)

where T is the tension in the cord and μ is the linear mass density (mass per unit length) of the cord.

μ = m/L

where m is the mass of the cord and L is its length.

So we have:

μ = m/L = 0.65 kg / 28 m = 0.023214 kg/m

v = √(T/μ) = √(150 N / 0.023214 kg/m) = 62.25 m/s

The time it takes for a pulse to travel from one support to the other is the distance between the supports divided by the wave speed:

t = d/v = 28 m / 62.25 m/s ≈ 0.45 s

Therefore, it will take approximately 0.45 seconds for a pulse to travel from one support to the other.

learn more about  pulse

https://brainly.com/question/31823574?referrer=searchResults

#SPJ11

A. the car would have the greater speed between the two. and B. the truck would have a higher kinetic energy compared to the car when they are moving at the same speed.

(a) If the car and the truck have the same kinetic energy but the truck has more mass, then the **car has a greater speed**.

Kinetic energy is given by the equation KE = (1/2)mv^2, where m is the mass and v is the velocity (speed) of the object. Since both the car and the truck have the same kinetic energy, we can set their kinetic energy equations equal to each other: (1/2)m_car*v_car^2 = (1/2)m_truck*v_truck^2.

If the truck has more mass than the car (m_truck > m_car), to maintain the equation's balance, the car must have a greater velocity (speed) than the truck (v_car > v_truck). Therefore, the car would have the greater speed between the two.

(b) If the car and the truck are moving with the same speed, then the **kinetic energy of the truck would be greater** if it has more mass.

As mentioned earlier, kinetic energy is proportional to the mass and the square of the velocity. Since the car and the truck have the same speed, the kinetic energy equation for both objects becomes KE = (1/2)m*v^2.

However, since the truck has more mass than the car, the kinetic energy of the truck would be greater because kinetic energy is directly proportional to mass. Thus, the truck would have a higher kinetic energy compared to the car when they are moving at the same speed.

To learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ11

the current (I) through an 80 W toaster when it operating voltage on 220V is 0.36 A.

Power is the rate of doing work. Power is also defined as work divided by time. i.e. Power = Work ÷ Time. Its SI unit is Watt denoted by letter W. Watt(W) means J/s or J.s-1. Something makes work in less time, it means it has more power. Work is Force times Displacement. Dimension of Power is [M¹ L² T⁻³]. The Electric Power  is current times voltage.

P = VI

Putting all the values,

80W = 220×I

I = 80/220

I = 0.36 A

To know more about Current :

https://brainly.com/question/13076734

#SPJ2.

The daughter nucleus of this decay Fluoride-15. The correct option is A.

Oxygen-15 is a radioactive isotope of oxygen that is commonly used in PET (positron emission tomography) imaging. In PET imaging, a small amount of a radioactive substance such as Oxygen-15 is injected into the body and then detected by a scanner, which creates images of the internal organs and tissues.

Oxygen-15 is a beta-plus emitter, which means it undergoes a decay process in which a proton in the nucleus is converted into a neutron, emitting a positron (a positively charged particle) and a neutrino in the process. The positron quickly interacts with an electron in the body, resulting in the annihilation of both particles and the emission of two gamma rays in opposite directions.

The daughter nucleus of the decay of Oxygen-15 is Fluoride-15. This is because the beta-plus decay process converts one proton in the nucleus into a neutron, changing the atomic number by one but leaving the mass number unchanged. Oxygen-15 has 8 protons and 7 neutrons, while Fluoride-15 has 9 protons and 6 neutrons. Thus, the decay of Oxygen-15 results in the production of Fluoride-15. The daughter nucleus of this decay Fluoride-15. The correct option is A.

To summarize, Oxygen-15 is a beta-plus emitter used in PET imaging, and its decay process results in the production of Fluoride-15 as the daughter nucleus. This decay process is important in medical imaging as it allows the detection of the distribution and metabolism of various compounds in the body, including glucose and other substances involved in cancer and other diseases.

To learn more about nucleus refer here:

https://brainly.com/question/17704494

#SPJ11

The corner frequency of the loaded filter is 5.53 kHz. To design a low-pass, RL, passive filter with a cutoff frequency of 6 kHz using a 1.1 mH inductor, we need to determine the value of the resistor.

We can use the formula for the cutoff frequency of an RL filter, which is:
f_c = 1 / (2 * π * L * R)
where f_c is the cutoff frequency, L is the inductance, and R is the resistance.
Substituting the given values, we have:
6 kHz = 1 / (2 * π * 1.1 mH * R)
Solving for R, we get:
R = 1 / (2 * π * 1.1 mH * 6 kHz) = 4.5 Ω
Therefore, the value of the resistor should be 4.5 Ω.
Now, we need to determine the corner, or cutoff, frequency of the loaded filter. The loaded filter can be modeled as an RL circuit with the load resistor in parallel with the filter output. The cutoff frequency of the loaded filter can be calculated using the following formula:
f_c' = f_c / √(1 + (R_L / R)^2)
where f_c' is the corner frequency of the loaded filter, R_L is the load resistance, and R is the filter resistance.
Substituting the given values, we have:
f_c' = 6 kHz / √(1 + (67 Ω / 4.5 Ω)^2) = 5.53 kHz
Therefore, the corner frequency of the loaded filter is 5.53 kHz.

To know more about frequency visit:

https://brainly.com/question/5102661

#SPJ11

The probability space has 2^n distinct events, each with a corresponding probability assigned to it. Each outcome can either be included or not included in an event, resulting in a total of 2^n possible combinations of events.

If |ω| = n, the probability space has 2^n distinct events. This is because each event is a subset of the sample space, and there are 2^n possible subsets of a set with n elements. Therefore, the probability space has 2^n distinct events, each with a corresponding probability assigned to it. It is important to note that not all of these events may be equally likely, and the probabilities assigned to each event must add up to 1. This property is essential for ensuring that the probability space satisfies the axioms of probability and is a valid mathematical construct.
If |ω| = n, this means that there are n distinct outcomes in the sample space ω. A probability space consists of three elements: the sample space ω, the set of events, and the probability measure. In this case, since there are n distinct outcomes, the probability space will have 2^n distinct events. This is because each outcome can either be included or not included in an event, resulting in a total of 2^n possible combinations of events.

To know about probability :

https://brainly.com/question/31828911

#SPJ11

The given problem involves finding the poles and zeros, determining the Region of Convergence (ROC), obtaining the partial fraction expansion, calculating the expression for r(n), and plotting the magnitude and phase spectra of the signal. Further calculations are required based on the specific coefficients provided to obtain the final results and plots.

To find the poles and zeros of X(2) and determine the Region of Convergence (ROC), we can equate the z-transform expression to zero and solve for z:

[tex]bo + b1z^(-1) + b2z^(-2) + b3z^(-3) = 20 + 0.2z^(-1) + a2z^(-2) + az^(-3) + 0.4z^(-4)[/tex]

By rearranging the equation and collecting terms, we have:

[tex](b0 - 20)z^3 + (b1 - 0.2)z^2 + (b2 - a2)z + (b3 - a)z^(-1) + 0.4z^(-4) = 0[/tex]

Comparing coefficients, we can determine the values of the poles and zeros.

b0 - 20 = 0    -->    b0 = 20

b1 - 0.2 = 0    -->    b1 = 0.2

b2 - a2 = 0    -->    b2 = a2 = -0.080

b3 - a = 0    -->    b3 = a = 0

0.4 = 0    -->    No coefficient for z^(-4), so no zero at z = 0

Therefore, the zeros of X(2) are at z = 0 and the poles are at z = 0. The ROC includes all values of z except 0.

To determine the partial fraction expansion of X(2), we factorize the equation:

[tex]X(2) = (20z^3 + 0.2z^2 - 0.080z - 0.080) / (z^4)[/tex]

By performing the partial fraction decomposition, we can write X(2) as a sum of terms:

[tex]X(2) = A / z + B / z^2 + C / z^3 + D / z^4[/tex]

By solving for the coefficients A, B, C, and D, we can obtain the partial fraction expansion of X(2).

To identify the terms belonging to the causal and non-causal parts of the signal, we can analyze the ROC. Since the ROC includes all values of z except 0, the signal is causal.

The expression for r(n) can be obtained by taking the inverse z-transform of X(2). The plot of r(n) will depend on the values of the coefficients and the range of n.

To plot the magnitude and phase spectra of the signal, we can evaluate X(2) at various frequencies by substituting z = e^(jω), where ω is the angular frequency. The magnitude spectrum can be plotted by calculating the absolute value of X(2) for different frequencies. The phase spectrum can be plotted by calculating the argument (angle) of X(2) for different frequencies.

Learn more about Region of Convergence here :_

https://brainly.com/question/985087

#SPJ11

The trichromatic theory of color vision states that color perception is due to the presence of three types of photoreceptor cells in the retina: red, green, and blue.

These cells are sensitive to different wavelengths of light and combine their signals to create our perception of a wide range of colors. In more detail, the theory suggests that our eyes have three types of cone cells that are each most sensitive to a specific range of wavelengths: long (red), medium (green), and short (blue). When light enters the eye, it stimulates these cone cells to varying degrees, depending on the wavelength composition of the light. The brain then interprets the signals from these cone cells to create our perception of different colors. This theory explains why mixing certain wavelengths of light can create the perception of various colors.

learn more about trichromatic here:

https://brainly.com/question/31546073

#SPJ11

The mass of the heavier object is 199.779 kg, while the lighter object is 0.221 kg. These values are obtained by solving a system of equations based on the combined mass and gravitational attraction between them. The gravitational force equation is used to relate the masses to the observed gravitational attraction.

Let's denote the mass of the heavier object as M and the mass of the lighter object as m. We are given that the combined mass of the two objects is 200 kg, so we have the equation:

M + m = 200 kg ---(1)

We are also given that the gravitational attraction between the objects is 8.37 × 10^(-6) N when their centers are 21.0 cm (or 0.21 m) apart. The gravitational force between two objects is given by the equation:

F = G * (M * m) / r^2

where F is the gravitational force, G is the gravitational constant (approximately 6.674 × 10^(-11) N m^2/kg^2), M and m are the masses of the objects, and r is the separation between their centers.

Plugging in the given values, we have:

8.37 × 10^(-6) N = (6.674 × 10^(-11) N m^2/kg^2) * (M * m) / (0.21 m)^2

Simplifying the equation:

8.37 × 10^(-6) N = (6.674 × 10^(-11) N m^2/kg^2) * (M * m) / 0.0441 m^2

8.37 × 10^(-6) N * 0.0441 m^2 = 6.674 × 10^(-11) N m^2/kg^2 * (M * m)

0.000368457 N m^2 = 6.674 × 10^(-11) N m^2/kg^2 * (M * m)

Dividing both sides of the equation by (6.674 × 10^(-11) N m^2/kg^2), we get:

0.000368457 N m^2 / (6.674 × 10^(-11) N m^2/kg^2) = M * m

55.221 kg = M * m ---(2)

We now have a system of two equations (equations 1 and 2) that we can solve simultaneously to find the values of M and m.

From equation 1:

M + m = 200 kg

m = 200 kg - M

Substituting this into equation 2:

55.221 kg = M * (200 kg - M)

Expanding the equation:

55.221 kg = 200M kg - M^2

Rearranging the equation:

M^2 - 200M + 55.221 kg = 0

This is a quadratic equation in terms of M. We can solve it using the quadratic formula:

M = (-b ± sqrt(b^2 - 4ac)) / 2a

Where a = 1, b = -200, and c = 55.221.

Solving the quadratic equation, we find two possible values for M:

M ≈ 0.221 kg (rounded to three decimal places) or M ≈ 199.779 kg (rounded to three decimal places).

Since M represents the mass of the heavier object, the mass of the heavier object is approximately 199.779 kg, and the mass of the lighter object is approximately 0.221 kg.

You can learn more about mass at: https://brainly.com/question/30940568

#SPJ11

Like color, sound waves have two properties: amplitude (height) and frequency. Frequency is a measure of the number of oscillations or cycles of the wave per unit of time and corresponds to our perception of pitch.

The frequency of a sound wave determines the pitch that we perceive. Higher frequencies correspond to higher pitches, while lower frequencies correspond to lower pitches. For example, a high-frequency sound wave would be perceived as a high-pitched sound, like a whistle, whereas a low-frequency sound wave would be perceived as a low-pitched sound, like a deep rumble. Amplitude, on the other hand, relates to the intensity or loudness of the sound wave, with higher amplitudes corresponding to louder sounds. The frequency of a sound wave is measured in hertz (Hz) and represents the number of complete oscillations the wave makes in one second. It determines how "high" or "low" we perceive the pitch of a sound.

Learn more about number of oscillations or cycles here:

https://brainly.com/question/31472633

#SPJ11

The work done by the system is 148.2J

The quantity of energy transferred by the force to move an object is termed as work done. It is a scalar quantity and measured in Joules.

The work done on a spiral spring is expressed as;

W = 1/2ke² or 1/2fe

where k is the force constant and e is the displacement.

K = 12N/m

e = 24.7 meters

W = 1/2 × 12 × 24.7

W = 296.4/2

W = 148.2 J

therefore the work done by the system is 148.2 J

learn more about work done from

https://brainly.com/question/8119756

#SPJ4

Among the options provided, option c. a change to -60 mV represents a depolarization.

A depolarization refers to a change in the membrane potential of a neuron towards a less negative value. In this case, the resting potential of the sensory neuron is -70 mV.

When the membrane potential of a neuron becomes less negative than the resting potential, it indicates a depolarization. In this case, the change from -70 mV to -60 mV represents a shift towards a less negative value, meaning the neuron is becoming depolarized.

Option a. a change to -90 mV represents hyperpolarization. Hyperpolarization occurs when the membrane potential becomes more negative than the resting potential, which is the opposite of depolarization.

Option b. staying at -70 mV represents the resting potential, which is not a depolarization as it signifies the neuron maintaining its resting state.

Therefore, option c. a change to -60 mV represents a depolarization of the sensory neuron.

To know more about depolarization, please click on:

https://brainly.com/question/20814039

#SPJ11

The terms low-spin state and high-spin state refer to the electronic configuration of a metal ion in a complex.



In a low-spin state, the metal ion has paired electrons in its d-orbitals. This results in a smaller splitting of the energy levels, or a smaller crystal field stabilization energy (CFSE). The CFSE is the energy gained by the metal ion when it is surrounded by ligands. In a low-spin state, the CFSE is smaller because the electrons in the d-orbitals are paired, and the ligands have less effect on the metal ion.

In contrast, in a high-spin state, the metal ion has unpaired electrons in its d-orbitals. This results in a larger splitting of the energy levels, or a larger CFSE. In a high-spin state, the CFSE is larger because the electrons in the d-orbitals are unpaired, and the ligands have a greater effect on the metal ion.

Overall, the low-spin state is more stable than the high-spin state because it has a smaller CFSE. The energy difference between the two states is called the spectrochemical series, which is a ranking of ligands based on their ability to split the energy levels of a metal ion. Strong-field ligands tend to favor a low-spin state, while weak-field ligands tend to favor a high-spin state.

learn more about low-spin state

https://brainly.com/question/31385125

#SPJ11

The electrostatic force of repulsion between two protons separated by 75 pm is 2.31 x 10⁻¹¹ N.

The electrostatic force of repulsion between two protons can be calculated using Coulomb's law:

F = (kq1q2) / r²

where F is the electrostatic force, k is Coulomb's constant (8.99 x 10⁹ Nm²/C²), q1 and q2 are the charges of the two protons (1.60 x 10⁻¹⁹ C), and r is the distance between the protons (75 pm = 7.5 x 10⁻¹¹ m).

Plugging in these values, we get:

F = (8.99 x 10⁹ Nm²/C²) * (1.60 x 10⁻¹⁹ C)² / (7.5 x 10⁻¹¹ m)²

F = 2.31 x 10⁻¹¹ N

Therefore, the electrostatic force of repulsion between two protons separated by 75 pm is 2.31 x 10⁻¹¹ N.

Learn more about electrostatic force

brainly.com/question/9774180

#SPJ11

The speed of light in fused quartz with a refractive index of n=1.458 is 2.06 ×[tex]10^8[/tex] m/s .

The speed of light in a vacuum is always constant and is equal to 3 x [tex]10^8[/tex]  m/s. However, when light passes through a medium, such as fused quartz with an index of refraction of n=1.458, the speed of light is slowed down. The relationship between the speed of light in a vacuum and the speed of light in a medium is given by the formula:

v = c/n

where v is the speed of light in the medium, c is the speed of light in a vacuum, and n is the refractive index of the medium.

Using the given wavelength of 589 nm, we can convert it to meters by dividing by [tex]10^9[/tex] :

589 nm = 589 x [tex]10^-^9[/tex]  m

Plugging in the values we get:

v = (3 x [tex]10^8[/tex]  m/s) / 1.458
v = 2.06 x [tex]10^8[/tex] m/s

Therefore, the speed of light in fused quartz with a refractive index of n=1.458 is approximately 2.06 x [tex]10^8[/tex]  m/s.

To know more about Refractive index refer here :

https://brainly.com/question/5170843

#SPJ11

The magnet must do zero work to stay clinging onto a fridge if the magnet is not moving at all. The correct option is A. zero.

Work is defined as the energy transferred to or from an object by a force acting on the object, causing the object to move in the direction of the force.

In this case, the magnet is not moving and is simply held in place by the magnetic force between the magnet and the fridge.

The force of gravity and frictional force against the fridge may affect the magnet, but they are not directly related to the amount of work the magnet is doing. Therefore, no work is being done by the magnet, and the answer is A) zero.

To know more about magnetic force, refer here:

https://brainly.com/question/3160109#

#SPJ11

To calculate the time (t) taken for the ball to hit the ground: Using the kinematic equation,v = u + at0 = 22.8 - 9.8t9.8t = 22.8t = 22.8/9.8t = 2.33 s. Therefore, it will take 2.33 s for the ball to hit the ground.

To calculate the maximum height reached by the ball: Using the kinematic equation,s = ut + (1/2)at², Where,s = maximum height reached by the ball t = time taken to reach the maximum height, u = initial velocity of the ball, a = acceleration of the ball 0 = 22.8t - (1/2)(9.8)t²22.8t = (1/2)(9.8)t²4.9t² = 22.8tt² = 22.8/4.9t ≈ 1.20s.

Hence, at a time of 1.20 s, the ball reaches the maximum height.

Using the kinematic equation,v² = u² + 2asHere, v = final velocity = 0, u = initial velocity, a = acceleration = -9.8s = maximum height reached by the ball0 = (22.8)² + 2(-9.8)s515.84 = 19.6s.

The ball reaches a maximum height of approximately 26.3 m above the ground.

To calculate the velocity of the ball just before it hits the ground: Using the kinematic equation,v = u + atv = 22.8 - 9.8(2.33)v = -4.86 m/s.

Hence, the velocity of the ball just before it hits the ground is -4.86 m/s.

Learn more about kinematic equation here ;

https://brainly.com/question/28980475

#SPJ11

The frequency applied to the inductor is 480.24 Hz.

Inductance of the inductor, L = 33 x 10⁻³H

Inductive reactance of the inductor, X(L) = 99.526 Ω

The inductive reactance of an inductor refers to the resistance it provides to the flow of alternating current through it. XL is used to indicate it.

The expression for inductive reactance of an inductor is given by,

X(L) = Lω

where ω is the angular frequency of the inductor.

X(L) = 2πfL

Therefore, frequency applied to the inductor is given by,

f = X(L)/2πL

f = 99.526/(2π x 33 x 10⁻³)

f = 480.24 Hz

To learn more about inductive reactance, click:

https://brainly.com/question/20541048

#SPJ1

the distance covered by traveling at a speed of 40 km/h for 5 hours is 200 km.

1) Distance between 2 cities = 375 km

Time taken by John to travel between 2 cities = 8 hours

We can use the formula:

Speed = Distance / Time

Speed = 375 km / 8 hours = 46.875 km/h

Therefore, John traveled at a speed of 46.875 km/h.2) Speed = 40 km/h

Time = 5 hours

We can use the formula:

Distance = Speed × Time

Distance = 40 km/h × 5 hours = 200 km

Therefore, the distance covered by traveling at a speed of 40 km/h for 5 hours is 200 km.

learn more about speed here

https://brainly.com/question/13943409

#SPJ11