An Arrhenius acid A) donates an electron pair. B) is a H donor C) is a H+ acceptor D) produces OH in aqueous solutions. E) produces H in aqueous solutions. (6) Which of the following is NOT a conjugate acid-base pair?

117.3 grams of hydrogen gas is produced in the reaction

Graduated cylinders are long, slender vessels used for measuring the volumes of liquids. They are not intended for mixing, stirring, heating, or weighing. Graduated cylinders commonly range in size from 5 mL to 500 mL. Some can even hold volumes of more than a liter.

Density - density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimetre are a typical unit of measurement for density.

2Al + 6 HCl = 2AlCl₃ + 3H₂

Density = mass / volume

2.702 g/mL = m / 5.50 mL

m = 14.861 g

mol Al = mass / molar mass

= 14.861 g / 26.98 g/mol

= 0.551 mol

So number of mol of aluminium nitrate formed will also be 0.551 mol

Mass of aluminium nitrate = mol x molar mass

= 0.551 mol x 212.996 g/mol

= 117.3 grams

to know more about Graduated cylinders go to - https://brainly.com/question/5704856

#SPJ4

The concentration of the sodium hydroxide will be 0.016 M

First, the concentration of the diluted nitric acid needs to be found.

m1 = 2.0 M,  v1 = 100 mL, v2 = 300.0 mL

m2 = 2 x 100/300 = 0.6667 M

The equation of the reaction goes thus: [tex]HNO_3 + NaOH = NaNO_3 + H_2O[/tex]

The mole ratio is 1:1.

Mole of 0.6667 M, 7.05 mL HNO3 = 0.6667 x 0.00705 = 0.0047 mol

Equivalent mole of NaOH = 0.0047 mol

Molarity of 0.0047 mol, 30.0 mL NaOH = 0.0047/0.3 = 0.016 M

More on stoichiometric problems can be found here: https://brainly.com/question/27287858

#SPJ1

Answer: A solid form of matter in which there is long-range repeating order is called crystalline.

Explanation:

A solid is crystalline if it has long-range order. Once the positions of an atom and its neighbors are known at one point, the place of each atom is known precisely throughout the crystal.

the major product of the reaction is (2S,3R)-3-methoxy-3-methylpentan-2-ol.

Epoxy, epoxide, oxirane, and ethoxyline are all names for substances that contain the epoxide functional group. Oxides are a common name for simple epoxides. Consequently, ethylene oxide is the epoxide of ethylene (C2H4).

Reaction  and explanation.

In order to answer this question, we must draw the main product and the studio chemistry. Yeah. Therefore, we will begin by drawing the reactant, which is an oxide.

As with this structure. Therefore, C. S. is applied to this epoxy side. Three ohs and two hash marks. As a result, the oxygen will be presented with the lone pair on the initial stage. And after that, we will receive the prototype for a thirty-plus-year-old product. And everything else will proceed as usual, even this.

Now this bond will be severed, and three miners from O. C. S. will attack from the back, in which case we will receive the finished product as seen here.

for more information about epoxide  visit:

brainly.com/question/14058900

#SPJ4

(2S,3R)-3-methoxy-3-methylpentan-2-ol is the reaction's main product. 

To learn more about epoxide visit:

https://brainly.com/question/14058900

#SPJ4

The final concentrations of water, isopentyl acetate, isopentyl alcohol, and acetic acid obtained on using equilibrium expression are 3.4M, 3.4M, 0.6M , 4.6M

Using ICE table:-

      Acetic acid  +  Isopentyl alcohol   ------>    Isopentyl acetate +  water

I         8M                   4M                                           0                           0

C        8-x                   4-x                                          +x                          +x                      

E        8-x                   4-x                                          +x                          +x

Equilibrium constant (Keq) = 4.2

On using the equilibrium expression -

Keq = [Product] / [Reactant]

Keq = x^2 / (8-x) (4-x )

4.2  =  x^2 / 32 - 8x - 4x + x^2

    x =  3.4

Concentration of acetic acid  = 8-x = 8-3.4 = 4.6M

Concentration of isopentyl alcohol = 4-x = 4-3.4 = 0.6M

Concentration of isopentyl acetate = x = 3.4M

Concentration of water = x = 3.4M

Learn more about equilibrium expression

https://brainly.com/question/14751091

#SPJ4

On oxidation of aldehydes produces carboxylic acid functional group.

The product of oxidation of aldehydes depends upon whether the reaction occur in acidic medium or alkaline condition.

If oxidation of aldehydes occurs under acidic condition the product is carboxylic acid but if oxidation of aldehydes occurs under alkaline condition then reduce as well as oxidized product obtained which is known as disproportional product.

The  oxidation of aldehydes occur through potassium dichromate, potassium permanganate or many more. The oxidation of aldehydes in the presence of base is known as cannizzaro's reaction.

learn about oxidation

https://brainly.com/question/16976470

#SPJ4

Answer:

C₃H₈ has a higher boiling point than C₂H₆

Explanation:

The boiling point is the temperature at which the intermolecular bonds holding molecules in liquid form are overcome and change the state into a gas. C₃H₈ experiences stronger intermolecular bonds then C₂H₆ because it has more carbons. While the strength of each bond is the same between the two molecules, C₃H₈ has more opportunities to create these bonds due to the higher carbon count.  The more bountiful the intermolecular bonds, the more energy is needed to overcome them all. Thus, C₃H₈ has a higher boiling point.

Concentration of unknown acid is 0.061 M

Given:

Concentration of NaOH = 0.125 M

Volume of NaOH = 24.68 mL

Volume of acid solution = 50.00 mL

To Find:

Concentration of the unknown acid

Solution: Concentration is the abundance of a constituent divided by the total volume of a mixture. The concentration of the solution tells you how much solute has been dissolved in the solvent

Here we will use the formula for concentration:

M1V1 = M2V2

0.125 x 24.68 = 50 x M2

M2 = 0.125 x 24.68 / 50

M2 = 0.061 M

Hence, the concentration of unknown acid is 0.061 M

Learn more about Concentration here:

https://brainly.com/question/17206790

#SPJ4

Answer:

11.2 grams CaO

Explanation:

It appears that substance X may be calcium carbonate:  CaCO3

CaCO3 can be thermally decomposed to CO2 and CaO in the following balanced reaction:

CaCO3(s) ⇒ CaO(s) + CO2(g)     (with applied heat, 840°C)

The molar ratio between the product, CaO, and the reactant, CaCO3, is 1:1.  If we start with 1 mole CaCO3, we should produce 1 mole of CaO.

We have 20.0 grams of substance X, which we'll label CaCO3.  Calculate the moles of CaCO3 by using its molar mass of 100.1 grams/mole.

 20.0 grams/(100.1 grams/mole) = 0.1998 or 0.200 moles of CaCO3.

This should produce, with a molar ratio of 1 to 1, 0.200 moles of CaO

Convert this to grams CaO by multiply by it's molar mass of 56.1 g/mole:

(0.200 moles)*(56.1 g/mole) = 11.2 grams CaO.  Any less, then blame it on your lab partner.  But don't try taking credit if you have more than 11.2 grams.  Scraping debri off the counter into the beaker doesn't count.

Nuclear energy is harmful because it releases of harmful ionizing radiation and has been employed in the production of atomic bombs and hydrogen bombs.

Nuclear energy is beneficial in that it produces vast amount of energy for domestic and industrial purposes.

Nuclear energy refers to the energy which is produced as a result of the changes that occur in the nucleus of atoms of elements.

Nuclear energy produces the largest amount of energy when compared to other forms of energy sources.

Nuclear energy is produced by two types of nuclear reactions:

Nuclear energy is harmful in that it results in the release of harmful ionizing radiation which damages cells and tissues of living organisms.

Nuclear energy is also harmful because nuclear energy has been employed in the production of atomic bombs and hydrogen bombs.

On the other hand, nuclear energy is beneficial in that it produces vast amount of energy which can be used for domestic and industrial purposes. It also produces fewer wastes that damage the environment compared to fossil fuels.

In conclusion, nuclear energy is both beneficial and harmful.

Learn more about nuclear energy at: https://brainly.com/question/15214614

#SPJ1

It is possible for two other resonance structures to be connected but results in positive formal charge which isn't suited for a very electronegative atom such as chlorine.

This is a type of diagram which depicts the bonding between atoms and lone pairs which are present in the molecule.

Adding two other resonance structures will also result in the poor overlap between the p-orbitals.

Read more about Lewis structure here https://brainly.com/question/1525249

#SPJ1

It does not have a strong seasonal influence on ozone over the Northern Hemisphere.

Three oxygen atoms make up ozone, a highly reactive gas. The stratosphere, the upper atmosphere of the planet, and the lower atmosphere both include this naturally occurring and artificial substance (the troposphere). Ozone has an impact on life on Earth, but only depending on where it resides in the atmosphere.

Molecular oxygen and solar ultraviolet (UV) light interact to naturally create stratospheric ozone. The "ozone layer," which is located 6 to 30 miles above the Earth's surface, decreases the quantity of dangerous UV light that reaches the surface.

Learn more about ozone here:

https://brainly.com/question/14330630

#SPJ4

Glaucoma Is a buildup of fluid within the eye.

The optic nerve, which is necessary for clear vision, is harmed by a group of eye conditions collectively referred to as glaucoma. This injury typically happens as a result of an excessively high amount of pressure in your eye. Glaucoma is one of the leading causes of blindness in persons over 60. Glaucoma frequently results from high intraocular pressure. Diabetes, however, can also increase your risk of developing glaucoma. We'll go into more detail about the connection between diabetes and glaucoma in this piece. We'll also talk about some preventative steps you may take to help keep your eyes healthy. Loss of side or peripheral vision: Often, this is the first glaucoma symptom.

Learn more about glaucoma here brainly.com/question/8285942

#SPJ1

Answer:

See below

Explanation:

[tex]\rule[225]{225}{2}[/tex]

The value of the Ksp can be obtained in terms of s as 4s^3.

The term Ksp has to do with the solubility product. It is the extent to which a substance can dissolve in water. We know that the solubility of the substance can be given as;

M(OH)2(s) ⇔M^+(aq) + 2OH^-(aq)

Ksp = s * (2s)^2

Ksp = s * 4s^2

Ksp = 4s^3

Thus it follows that the value of the Ksp can be obtained in terms of s as 4s^3.

Learn more about Ksp:https://brainly.com/question/27132799

#SPJ1

Regions in the human genome where one nucleotide has been substituted for another in at least 1% of the population are called single nucleotide polymorphism

Nucleotide can simply be defined as the basic building block of nucleic acids either RNA and DNA

Generally, nucleotides consists of a sugar molecule (either ribose in RNA or deoxyribose in DNA) attached to a phosphate group and a nitrogen-containing base.

A region is any considerable and connected part of a space or surface; specifically, a tract of land or sea of considerable but indefinite extent, a country, a district, in a broad sense, a place without special reference to location or extent but viewed as an entity for geographical, social or cultural reasons.

So therefore, regions in the human genome where one nucleotide has been substituted for another in at least 1% of the population are called single nucleotide polymorphism.

Learn more about nucleotides:

https://brainly.com/question/19654386

#SPJ1

The value of the equilibrium constant is 1.99 × [tex]10^-^5^0[/tex] .

Given:

Concentration of [tex]O_2 = 1.6[/tex] × [tex]10^-^2 M\\[/tex]

Concentration of [tex]O_3 = 2.86[/tex] × [tex]10^-^2^8 M[/tex]

A chemical reaction known as an equilibrium reaction occurs when the reactants remain in a stable condition both during and after the reaction.

The given balanced equilibrium reaction is,

[tex]3O_2 (g) = 2O_3 (g)[/tex]

The expression for equilibrium constant will be,

[tex]K_c = \frac{[O_3] ^2}{[O_2]^3}[/tex]

Now put all the given values in this formula, and we get

[tex]K_c = \frac{(2.86 * 10^-^2^8] ^2}{[1.6 * 10 ^-^2]^3}[/tex]

[tex]K_c = 1.99[/tex] × [tex]10^-^5^0[/tex]

Therefore, the value of the equilibrium constant is 1.99 × [tex]10^-^5^0[/tex] .

Learn more about equilibrium here:

https://brainly.com/question/13414142

#SPJ4

The property a radioisotope used for dating should have is Its half-life should be similar to the age of the fossil and is denoted as option B.

This is an element which is unstable and releases radiation to achieve its stability.

The half-life of the element used in dating should be similar to that of the fossil for easy comparisons and accuracy.

Read more about Radioisotope here https://brainly.com/question/18640165

#SPJ1

Answer:

b, half life should be similar to the fossil

Explanation:

Answer:

Nitrous oxide

Explanation:

Nitrous+ Oxygen (ygen becomes -ide when it is combined) = Nitrous oxide

just learnt these in school, hope this is correct

hii kiran hru my darling

The hydrogen bonds between molecules of hydrogen peroxide loosen as temperature rises toward the optimal point, facilitating catalase's reaction with the molecules. The enzyme denatures and its structure is affected if the temperature rises above the ideal level.

The catalase is an enzyme that is responsible for reducing hydrogen peroxide.

To learn more about catalase visit:

https://brainly.com/question/1560864

#SPJ4

The hydrogen bonds between molecules of hydrogen peroxide loosen as temperature rises toward the optimal point, facilitating catalase's reaction with the molecules. The enzyme denatures and its structure is affected if the temperature rises above the ideal level.

The catalase is an enzyme that is responsible for reducing hydrogen peroxide.

To learn more about catalase visit:

brainly.com/question/1560864

#SPJ4

Answer:

10.3 g Al

Explanation:

To find the excess mass of Al, you need to (1) convert grams I₂ to moles I₂  (via molar mass), then (2) convert moles I₂ to moles AlI₃ (via mole-to-mole ratio from equation coefficients), then (3) convert moles AlI₃ to grams AlI₃ (via molar mass). Now that you have the actual amount of AlI₃ produced, you need to (4) convert grams AlI₃ to moles AlI₃ (via molar mass), then (5) convert moles AlI₃ to moles Al (via mole-to-mole ratio from equation coefficients), and then (6) convert moles Al to grams Al (via molar mass). Now that you know the amount of Al actually needed to produce the product, you need to (7) find the excess mass of Al.

Molar Mass (Al): 26.982 g/mol

Molar Mass (I₂): 2(126.90 g/mol)

Molar Mass (I₂): 253.8 g/mol

Molar Mass (AlI₃): 26.982 g/mol + 3(126.90 g/mol)

Molar Mass (AlI₃): 407.682 g/mol

2 Al(s) + 3 I₂(g) -------> 2 AlI₃(g)

 113 g I₂           1 mole             2 moles AlI₃          407.682 g
-------------  x  ----------------  x  ----------------------  x  -------------------  =  121 g AlI₃
                       253.8 g             3 moles I₂               1 mole

121 g AlI₃           1 mole                2 moles Al           26.982 g
---------------  x  ------------------  x  ---------------------  x  -----------------  =  8.01 g Al
                        407.682 g          2 moles AlI₃           1 mole

Starting Amount - Mass Needed = Excess

18.3 g Al - 8.01 g Al = 10.3 g Al

Answer:

electrical conduction

Explanation:

Answer:

The coefficient for Al(s) is 2.

Explanation:

__ Al(s) __ O2(g) --> __ Al2O3(s)

__ Al(s) __ O2(g) --> 1 Al2O3(s)

1 Al(s) __ O2(g) --> 1 Al2O3(s)

1 Al(s) + 1.5 O2(g) --> 1 Al2O3(s)             [Use a fraction to make it balance]

2 Al(s) + 3 O2(g) --> 2 Al2O3(s)             [Convert the 1.5 fraction to a whole number by multiplying all coefficients by 2]

The enthalpy of vaporization for Benzene is 30.8 kJ/mol. 39.42 kJ is the energy change when 100g of Benzene boils at 80.1 degrees Celsius.

The amount of enthalpy or energy that must be added to a liquid substance into gas substance is called Enthalpy of Vaporization. It is also known as Latent heat of vaporization.

To calculate the energy use this expression:

[tex]Q = n \Delta H_{\text{vapo.}[/tex]

where,

Q = Energy change

n = number of moles

[tex]\Delta H_{\text{Vapo.}}[/tex] = Molar enthalpy of vaporization

Now find the number of moles

Number of moles (n) = [tex]\frac{\text{Given Mass}}{\text{Molar mass}}[/tex]

                                   = [tex]\frac{100\ g }{78\ g/mol}[/tex]

                                   = 1.28 mol

Now put the values in above formula we get

[tex]Q = n \Delta H_{\text{vapo.}[/tex]

   = 1.28 mol × 30.8 kJ/mol

   = 39.42 kJ

Thus from the above conclusion we can say that The enthalpy of vaporization for Benzene is 30.8 kJ/mol. 39.42 kJ is the energy change when 100g of Benzene boils at 80.1 degrees Celsius.

Learn more about the Enthalpy of Vaporization here: https://brainly.com/question/13776849

#SPJ1

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: The enthalpy of vaporization for Benzene is 30.8 kJ/mol. What is the energy change when 100g of Benzene boils at 80.1 degrees Celsius?

Answer:

0.6258 g

Explanation:

To determine the number grams of aluminum in the above reaction;

Moles of HCl

35 mL of 2.0 M HCl

2 moles of HCl is contained in 1000 mL

x moles of HCl is contained in 35 mL

[tex]x \: mol \: = \: \frac{2 \: \times \: 35}{1000} \\ = 0.07 \: moles \: [/tex]

We have 0.07 moles of HCl.

Mole ratio

6HCl(aq) + 2Al(s) --> 2AlCl3(aq) + 3H2(g)

Hence mole ratio = 6 : 2 (HCl : Al

[tex] = \frac{2}{6} \times 0.07 \\ \: = 0.0233333 \: moles[/tex]

Therefore we have 0.0233333 moles of aluminum.

Grams of Aluminum

We use the formula;

[tex]grams \: = moles \: \times \: rfm[/tex]

The RFM (Relative formula mass) of aluminum is 26.982g/mol.

Substitute values into the formula;

[tex] = 0.0233333 \: moles \: \times \: 26.982 \: \frac{g}{mol} \\ = 0.625799 \: grams[/tex]

The number of grams of aluminum required to react with HCl is 0.6258 g.

According to valence bond theory, 2s and 2p orbital of carbon atom will be formed pi bonding.

One of it's two fundamental theories created to use quantum mechanics to describe chemical bonding would be the valence bond theory, and molecular orbital theory.

Eight valence electrons should be used to generate two double bonds in the CS2 molecule. As a result, it uses up eight of the 16 valence electrons. These valence electrons are located in the carbon atom's 2s and 2p orbitals, where they join to create a double bond.

Therefore, according to valence bond theory, 2s and 2p orbital of carbon atom will be formed pi bonding.

To know more about valence bond theory

https://brainly.com/question/23129240

#SPJ4

Answer:

Be = 1s²2s²

Explanation:

Beryllium (Be) is the 4th element on the periodic table. As such, beryllium has 4 electrons. It is the second element located in the second row in the s-block. Therefore, beryllium's electron structure should consist of 2 completely filled s-orbitals.

Answer:

Explanation:

8281s