Answer:
Centripetal force = 13140 Newton.
Explanation:
Given the following data;
Mass = 1.46 E3 kg = 1.46*10³ = 1460 kg
Velocity = 15m/s
Radius, r = 25m
To find the centripetal force, we would use the following formula:
Centripetal force = mv²/r
Substituting into the equation, we have;
Centripetal force = (1460*15²)/25
Centripetal force = (1460 * 225)/25
Centripetal force = 328500/25
Centripetal force = 13140 Newton.
How long will it take for a basketball spinning on someone’s finger to stop if it undergoes and angular acceleration of -0.15 rad/s and is traveling at 27 rad/s initially? How many revolutions will it make?
The basketball's angular velocity ω at time t is
ω = 27 rad/s + (-0.15 rad/s²) t
It comes to a stop when ω = 0, which happens for
0 = 27 rad/s - (0.15 rad/s²) t
t = (27 rad/s) / (0.15 rad/s²)
t = 180 s
In this time, the ball would undergoes an angular displacement θ of
θ = (27 rad/s) t + 1/2 (-0.15 rad/s²) t ²
Plug in t = 180 s and solve for θ :
θ = (27 rad/s) (180 s) - 1/2 (0.15 rad/s²) (180 s)² = 2430 rad
One complete revolution corresponds to a turn of 2π rad, so the ball makes
(2430 rad) / (2π rad/rev) ≈ 386.747 rev
or about 387 revolutions as it slows down.
PLS ANSWER FAST WILL GIVE BRAINLY!!!!!!
.What are some observations we can make to determine if something has energy?
Answer:
if somthing is warm or if somthing moves it usally has energy
What name is given to the turning effect of a force?
Answer:
The turning effect of a force is known as the moment. It is the product of the force multiplied by the perpendicular distance from the line of action of the force to the pivot or point where the object will turn. When undoing a nut fastened to a screw by hand one realises that the amount of force required is a lot greater than when undoing the same nut using a spanner.
Explanation:
Five independent measurements are made of the diameter of a cylinder. Results, in mm, are: 21.8; 21.6; 22.1; 21.9; 22.1. What should be the reported value of the cylinder's diameter?
Answer: 21.9 mm
Explanation:
Given that five independent measurements are made of the diameter of a cylinder. Results, in mm, are: 21.8; 21.6; 22.1; 21.9; 22.1. What should be the reported value of the cylinder's diameter?
The measurement of the diameter of cylinder is measured several time in order to reduce the uncertainty called random error.
The reported value of the cylinder's diameter should be the average or the mean value of the whole measurement.
That is
Mean = (21.8 + 21.6 + 22.1 + 21.9 + 22.1) ÷ 5
Mean = 109.5 ÷ 5
Mean = 21.9 mm
Therefore, the reported value of the cylinder diameter will be 21.9 mm
Empujamos un baúl 3 metros, para ello aplicamos una fuerza de 200 Newton. ¿Cuál es el trabajo realizado?
Answer:
Trabajo realizado = 600 Nm
Explanation:
Dados los siguientes datos;
Fuerza = 200 Newton
Distancia = 3 metros
Para encontrar el trabajo realizado; Trabajo realizado = fuerza * distancia
Sustituyendo en la ecuación, tenemos; Trabajo realizado = 200 * 3
Trabajo realizado = 600 Nm
Which of the following is a basic solution?
Answer:
what exactly are the following?
ANSWER BOTH ASAP NEED HELPPP
AFTER a ringing tuning fork passes very quickly in front of a stationary observer...
a) The sound waves are equally spaced out
b) The sound has a lower pitch
c) The sound waves have equal amplitudes
d) all could apply
Which of the following equations correctly models a balanced single replacement reaction?
Answer:
d
Explanation:
is the answer
Explain why a charged body loses its charge if we touch it with our hand?
if u answer me I can give u brainliest ☺️
Answer:
Explanation: A charged body loses its charge when we touch it with our hand because some of the charge flows through our body to the ground earthing. As a result the charge on the body decreases every time we touch it. This is because of earthing.
Explanation:
yw .
Explanation:
When we touch a charged body, it loses its charge, due to the process of earthing. Our body is a good conductor of electricity. It transfers the charges to the earth
The wood wrangler track team traveled South toward Garner Middle
School, they drove 20 km in 10 min, what was the VELOCITY of the team?
0.5 km/min
0.5 km/min SOUTH
2 km/min
2 km/min SOUTh
Answer:
2km/min
Explanation:
Velocity= change in distance / time taken
Velocity = 20km/10min=2km/min south
South is placed there to show what direction she went, as velocity has both magnitude and direction
what is the physical properties of radon
Answer:
1) Radon is colorless at standard temperature and pressure and it is the most dense gas known. At temperature below it's freezing point is has a brilliant yellow phosphorescence. It is chemically unreactive, it is highly radioactive and has a short half life.2) 7.5 times heavier than air and more than 100 times heavier than hydrogen. The gas liquefies at −61.8 °C (−79.2 °F) and freezes at −71 °C (−96 °F). On further cooling, solid radon glows with a soft yellow light that becomes orange-red at the temperature of liquid air (−195 °C [−319 °F]).Explanation:
I think this much is enough , as more information is given in other answer if more is needed just comment me I will answer you there only.Recall: earth applies _____________ on Earth or equivalently
Answer:
gravitational attraction
What is mass? (Specific simple answer)
Answer:
Mass is the quantity of substance in an object
why Newton law of gravitational force is called universal law
Answer:
Newton's law of gravitational holes good irrespective of the nature of two bodies., i.e., big or small, at all times, at all locations and for all distances in the universe.
Explanation:
It is called so because it is applicable on all bodies having mass, and the bodies will be governed by the same law, that is newton's law of gravitation. Thus, as it is applicable universally, it is called as universal law.
Name two devices we use generators in. Describe how they work.
Answer:
There are two fundamental types of generators known as AC (alternating current) and DC (direct current) generators. While the technique of producing electricity is the same in both types, AC and DC power become different in terms of their applications – the way in which loads receive electric power.
Explanation:
An electric generator is a device that converts mechanical energy obtained from an external source into electrical energy as the output. ... Instead, it uses the mechanical energy supplied to it to force the movement of electric charges present in the wire of its windings through an external electric circuit.
The property of a moving object that makes it hard to stop is
Use the following information about Earth and its moon to determine the distance between them. Earth's mass = 6.0 x 1024 kg Moon's tangential speed = 1,025 m/s Earth's radius = 6.4 x 10 m Moon's mass = 7.3 X 1022 kg 4.6 x 106 m O 3.8 x 108 m O 3.9 x 1011 m
Answer:
3.8 × 108 m
Explanation:
Use formula: v^2 = G x m central / r
G = 6.77 e-11
Also, it was right on Edge.
Good luck!
The distance between Earth and its moon is 3.8×10⁸ m.
What is centripetal force?
A force that causes a body to follow a curved path is known as a centripetal force. It always moves in a direction that is the opposite of the body's velocity and in the direction of the immediate center of curvature of the path.
It is "a force by which bodies are dragged or driven, or in any manner tend, towards a point as to a center," according to Isaac Newton.
Given parameters:
Mass of the Earth: M = 6.0 × 10²⁴ kg.
Mass of the moon: m = 7.3 × 10²² kg.
Moon's tangential speed: v = 1,025 m/s
Let the distance between the center of Earth and the moon is r.
Hence,
GMm/r² = mv²/r
r = GM/v²
= 6.7 × 10 ⁻¹¹ × 6.0 × 10²⁴ / (1,025)²
= 3.82×10⁸ m.
Hence, by subtracting Earth's radius = 6.4 x 10⁶ m, we get, the distance between Earth and its moon is 3.8×10⁸ m.
Learn more about centripetal force here:
https://brainly.com/question/11324711
#SPJ2
What is the main force that must be overcome in order to push an object
along a horizontal surface?
Answer: Friction
Explanation:
Friction and the normal force would be the two initial forces to overcome.
Answer: Friction
Explanation: The object must be pushed along which will create friction which nmust be overcome.
What made heliocentrism scientific?
A force of 900 N pushes a wedge 0.10 m into a log. If the work done on the log is 50 J, what is the efficiency of the wedge?
HELPPPP
Answer:
55.56%
Explanation:
We'll begin by calculating the work done in pushing the wedge. This can be obtained as follow:
Force (F) = 900 N
Distance (s) = 0.1 m
Workdone (Wd) =..?
Wd = F × s
Wd = 900 × 0.1
Wd = 90 J
Finally, we shall determine the efficiency. This can be obtained as follow:
Work output = 50 J
Work input = 90 J
Efficiency =?
Efficiency = work output / work input
Efficiency = 50 / 90 × 100
Efficiency = 55.56%
Thus, the efficiency is 55.56%
A wave frequency of 440 Hz travels through a medium at 343 m/s. Calculate the wavelength
for this wave.
150,920 m
1.28 m
97 m
0.078 m
Answer:
0.78 m
Explanation:
us the formula
speed = frequency x wavelength
343 = 440 x wavelength
343 / 440 = wavelength
wavelength = 0.78 m
I think the last option, you wrote wrongly, it is supposed to be 0.78 not 0.078 .
if you think I am wrong please do tell me, I will redo this.
hope this helps
PLS HELPPP!! ITS DUE TODAY!
I will make brainliest!
Answer the following question:
Which process is an example of a physical change?
a. carrots are cut into small pieces and mixed into a salad
b. a peanut butter sandwich is eaten and broken down by enzymes in the stomach
c. sodium metal and chlorine gas are combined to form a sodium chloride, or table salt
d. sodium metal and water are combined to form a basic compound and a flammable gas
The graph shows the amplitude of a passing wave over time in seconds (s) What is the approximate frequency of the wave shown? A. 6 Hz B. 0.2 0.4 Hz
Answer:
0.2 I took the test
Explanation:
I took the test
The time period of the whole wave cycle is 6 seconds but the time period of one complete wave is about 4 seconds here. The inverse of this time period is the frequency, that is 0.2 Hz.
What is frequency ?Frequency by definition is the number of events per unit time. Frequency of a wave is the number of wave cycles in one second. It is the inverse of the time period.
Frequency is directly related to the energy of the wave. As the frequency increases, energy of the wave also increases. In the given graph the wave cycle is given for a time of 6 seconds.
The time period for one complete wave is 4 second from the graph.
thus, T = 4 s
v = 1/T
= 1/4 = 0.2 s⁻¹ or 0.2 Hz
Therefore, the frequency of the wave shown, is 0.2 Hz.
Find more on frequency:
https://brainly.com/question/14316711
#SPJ5
is there a gravitational force of attraction between your phone and the earth?
The Atoms Family
Sub-atomic Particle Charge
Location in the atom Mass of particle
Proton
Neutron
Electron
On hot sunny days or days with thin clouds, the temperature over the land is warmer than the temperature over the water. The warmer air rises and the cooler air moves over the land, producing sea breezes. This means that,
A: Water takes longer to heat up than the land
B: Soil warms up more slowly than the water
C: The air above the land becomes cool and rises
D: Land takes longer to heat up tan the water
Answer:
i think it would be a but i am not 100% sure on that
PLEASE HELPP IL GIVE BRAINLY AND HEART
if the land warms faster than the sea during the day, which breeze is experienced ( Assume during the day and that the land asd sea do not have the same temperature. )
A) Sea breeze
B ) Land breeze
C ) No breeze
Answer:
sea breeze
Explanation:
Answer:
A sea breeze
Explanation:
Which of the following instruments measures time most accurately?
a. Sundial
b. quartz watch
c. pendulum clock
d. watch with balance wheel
Answer:
b) Quartz Clock
Explanation:
It's is a very type of clock which uses the vibration of quartz crystals to measure time accurately
A car manufacturer wants to change its car’s design to increase the car’s acceleration. Which changes should the engineers consider making to the design? increase the force that the engine provides decrease the force that the engine provides increase the mass of the car decrease the mass of the car increase the top velocity the car can travel decrease the top velocity the car can travel
Answer:
I. increase the force that the engine provides.
II. decrease the mass of the car
Explanation:
Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.
Mathematically, it is given by the formula;
Force = mass * acceleration
[tex] Acceleration = \frac {Force}{mass} [/tex]
In this scenario, a car manufacturer wants to change its car’s design to increase the car’s acceleration. Thus, the changes the engineers should consider making to the design is to increase the force that the engine provides and decrease the mass of the car.
Answers:
increase the force that the engine providesdecrease the mass of the carincrease the top velocity the car can travel