a(n) _____ data dictionary is not updated automatically and usually requires a batch process to be run.

An Electronic Flight Instrument System (EFIS) transmits data between its components using digital signals.

So, the correct is option A.

In an EFIS, various sensors collect flight data, which is then converted into digital signals to ensure accurate and efficient communication between the components. Digital signals provide better noise resistance and data integrity compared to analog or carrier wave signals.

This reliable and precise data transmission allows pilots to access critical flight information on their displays, such as altitude, airspeed, and attitude, improving overall flight safety and decision-making. In summary, digital signals are used in EFIS for efficient and accurate data transmission between components.

Hence, the answer is A.

Learn more about digital signal at https://brainly.com/question/11787778

#SPJ11

Sure! Here's a for loop in Python that prints all the positive multiples of 5 in ascending order, separated by spaces, up to a value of 175:

```python

for i in range(5, 175, 5):

   print(i, end=" ")

```

Explanation:

- The `range(start, stop, step)` function generates a sequence of numbers from `start` to `stop-1`, incrementing by `step` each time.

- In this case, we start the range from 5 because we want to print positive multiples of 5.

- The stop value of 175 ensures that we only print multiples that are less than 175.

- The step of 5 ensures that we increment by 5 to get the next multiple.

- Within the loop, `i` represents each multiple of 5, and we use `print(i, end=" ")` to print each value separated by a space instead of a newline.

When you run this code, it will output:

```

5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170

```

This loop iterates over the desired range and prints each multiple of 5 separated by a space.

Note: If you don't want to include the final value 175, you can modify the stop value in the `range()` function to `170` instead.

Let me know if you need further assistance!

learn more about  loop in Python

https://brainly.com/question/23419814?referrer=searchResults

#SPJ11

The "Bugtraq" mailing list is a widely known, major source of public vulnerability announcements.

Bugtraq is a mailing list that focuses on the discussion and disclosure of computer security vulnerabilities. It serves as a platform for researchers, security professionals, and enthusiasts to share information about newly discovered vulnerabilities in software, operating systems, and other technology systems. The Bugtraq mailing list is highly regarded in the cybersecurity community and is recognized for its role in disseminating timely and relevant information about security vulnerabilities.

Many security researchers and organizations rely on Bugtraq to stay updated on the latest vulnerabilities and to take appropriate measures to protect their systems.

You can learn more about Bugtraq at

https://brainly.com/question/14046040

#SPJ11

The correct answer is True.Because of the weaknesses of WEP (Wired Equivalent Privacy), it is possible for an attacker to identify two packets derived from the same initialization vector (IV).

WEP is an outdated wireless security protocol that was commonly used in early Wi-Fi networks. It has several known vulnerabilities, including weak encryption mechanisms and predictable IVs. The IV is a component used in the encryption process of WEP to introduce randomness.One of the weaknesses of WEP is that it reuses IVs, which leads to the same encryption key being used for multiple packets. This repetition allows an attacker to capture enough packets and analyze their patterns to identify when two packets share the same IV. Once an attacker identifies packets with the same IV, they can employ statistical analysis techniques to potentially deduce the key used for encryption.

To know more about vector click the link below:

brainly.com/question/32077106

#SPJ11

Two features of Hotspot 2.0 are Passpoint and Seamless Roaming. Hotspot 2.0 encompasses several features aimed at improving the user experience and security of Wi-Fi networks.

One of the key features of Hotspot 2.0 is Passpoint, which enables automatic authentication and connection to Wi-Fi networks without the need for manual login credentials. Passpoint uses industry-standard security protocols to securely authenticate devices and establish a connection with compatible hotspots. This feature allows users to seamlessly connect to Wi-Fi networks in public spaces, such as airports, hotels, and coffee shops, without the hassle of entering usernames and passwords.

Another notable feature of Hotspot 2.0 is Seamless Roaming. With Seamless Roaming, users can move between different Wi-Fi networks or access points within the same network without experiencing interruptions or manual reconnections. It provides a seamless transition as devices switch between access points, ensuring a continuous and uninterrupted Wi-Fi connection. This feature is particularly beneficial in environments with multiple access points, such as large buildings, campuses, or outdoor areas where Wi-Fi coverage needs to be extended. Seamless Roaming improves the user experience by eliminating the need to manually reconnect to different access points, providing a seamless and uninterrupted internet connection.

Learn more about Wi-Fi networks here-

https://brainly.com/question/4594798

#SPJ11

The margin of error for a 95% confidence interval cannot be determined based on the given information.

To determine the margin of error for a confidence interval, we need additional information such as the sample size and the standard error of the estimate. The given information does not provide these details, so we cannot calculate the margin of error accurately.

However, I can explain the concept of the margin of error. In the context of a confidence interval, the margin of error represents the range of values around the estimated parameter (in this case, beta_1) within which we expect the true parameter to fall with a certain level of confidence. It is influenced by factors such as sample size and variability in the data.

To calculate the margin of error, we typically use a formula that involves the standard error of the estimate and the critical value corresponding to the desired level of confidence. Without these values, we cannot provide a specific margin of error for the given scenario.

To know more about margin of error,

https://brainly.com/question/30499685

#SPJ11

To handle negative-weight cycles in a graph using the Bellman-Ford algorithm, perform an extra iteration and a depth-first search to set v.d to -infinity for all vertices v in the cycle.

To modify the Bellman-Ford algorithm to set v.d to -infinity for all vertices v with negative-weight cycles on paths from the source to v, we can simply add an additional step after the relaxation step. This step involves performing another iteration over all edges and checking for any edges that can still be relaxed. If we find that we can still relax an edge, it means that there exists a negative-weight cycle in the graph. To set v.d to -infinity for all vertices v with negative-weight cycles, we can then perform a depth-first search from any vertex that has been updated during the previous iteration. We mark all vertices that are reachable from this vertex as being part of the negative-weight cycle. Finally, we set the v.d value to -infinity for all marked vertices. By performing these additional steps, we can modify the Bellman-Ford algorithm to correctly handle negative-weight cycles in the graph.

Learn more about Bellman-Ford algorithm here;

https://brainly.com/question/31504230

#SPJ11

To merge two lists, you can use the following code:

```java

public static List<Integer> merge(List<Integer> nums1, List<Integer> nums2) {

   List<Integer> mergedList = new ArrayList<>();

   mergedList.addAll(nums1);

   mergedList.addAll(nums2);

   return mergedList;

}

Merging two lists in Java can be achieved by using the `addAll()` method of the `ArrayList` class. In the provided code, the `merge()` function takes two parameters: `nums1` and `nums2`, both of which are lists of integers.

Inside the function, a new `ArrayList` called `mergedList` is created to store the merged result. The `addAll()` method is then used to append all elements from `nums1` and `nums2` to `mergedList`. Finally, the merged list is returned as the result.

This approach combines the elements of both input lists in the order they appear, resulting in a new list that contains all the elements from `nums1` followed by all the elements from `nums2`. It does not modify the original lists.

Learn more about list Java

brainly.com/question/12978370

#SPJ11

The two types of VPNs that are examples of enterprise-managed remote access VPNs are: A. Client-based IPsec VPN: D. Remote access VPN:

The two types of VPNs that are examples of enterprise-managed remote access VPNs are:

A. Client-based IPsec VPN: This type of VPN requires a client software installed on the user's device, which establishes a secure connection to the enterprise network using IPsec protocols.

D. Remote access VPN: This type of VPN allows remote users to securely access the enterprise network over the internet using encrypted tunnels, providing remote access to resources and services.

These VPNs are managed by the enterprise to ensure secure remote access for their employees or authorized users. They provide a secure connection for remote users to access the enterprise network and its resources while maintaining data confidentiality and integrity.

Learn more about VPNs

brainly.com/question/17272592

#SPJ11

The statement is true. Default passwords pose unique vulnerabilities as they are widely known among system attackers but are necessary tools for vendors.

It is true that default passwords can create unique vulnerabilities in systems. Default passwords are pre-configured passwords that are set by manufacturers or vendors and are often known to a wide range of individuals, including potential attackers. These passwords are typically used to facilitate initial access or setup of a system or device.

However, the widespread knowledge of default passwords among attackers can lead to security risks. Attackers can exploit this knowledge to gain unauthorized access to systems or devices that still have their default passwords enabled. Once inside, they may be able to carry out malicious activities, such as stealing sensitive information, disrupting services, or even taking control of the system.

Despite the vulnerabilities they introduce, default passwords are necessary tools for vendors. They serve as a means for users to access and configure their newly acquired systems or devices easily. Vendors often provide instructions and guidelines for users to change the default passwords promptly upon setup to enhance security. However, it is essential for users to be proactive in changing default passwords to unique and strong ones, reducing the risk of unauthorized access and potential exploitation by attackers who are familiar with default passwords.

Learn more about information here: https://brainly.com/question/31713424

#SPJ11

True. Segmentation without paging does allow different processes to share parts of their address space.

In a segmented memory management system, the memory is divided into variable-sized segments. Each process has its own logical address space, which is divided into a set of segments. These segments can be shared among different processes, enabling inter-process communication and efficient use of memory resources.

When segmentation is implemented without paging, the segments are directly mapped to physical memory. This means that the segments can be of any size and can be placed anywhere in the physical memory, as long as there is enough contiguous space available. This flexibility allows different processes to share parts of their address space, as the segments can be mapped to the same physical memory locations.

For example, consider two processes that need to share a common data structure. In a segmentation system without paging, the data structure can be placed in a shared segment, which can be accessed by both processes. This enables efficient sharing of memory resources and inter-process communication.

However, it is important to note that segmentation without paging can also lead to issues such as external fragmentation, where the free memory becomes scattered throughout the system, making it difficult to allocate large contiguous blocks of memory. To mitigate this issue, memory management systems often implement paging in combination with segmentation, resulting in a more efficient and organized memory allocation scheme.

Know more about the physical memory click here:

https://brainly.com/question/20813107

#SPJ11

If a user can ping the IP address of a web server but cannot ping the web server host name, the DNS server is likely malfunctioning.

The Domain Name System (DNS) is responsible for resolving domain names to their corresponding IP addresses. When a user tries to access a web server by entering its host name (e.g., www.example.com), the DNS server translates that host name into an IP address so that the user's computer can establish a connection with the server. If a user is able to successfully ping the web server's IP address but cannot ping the host name (e.g., pinging www.example.com), it indicates a problem with the DNS server. This suggests that the DNS server is not properly resolving the host name to its associated IP address.

There could be various reasons for the DNS server malfunction, such as misconfigurations, network connectivity issues, DNS server downtime, or incorrect DNS records. When the DNS server fails to resolve the host name, the user's computer is unable to establish a connection using the host name but can still communicate with the server directly using its IP address.

Learn more about network here:https://brainly.com/question/30456221

#SPJ11

Treatments that use thermal agents such as cold and heat applications are called thermotherapy.

Thermotherapy involves the application of heat or cold to the body to provide therapeutic benefits. Cold therapy, also known as cryotherapy, involves the use of cold temperatures to reduce inflammation, relieve pain, and decrease swelling. Heat therapy, also known as thermotherapy, involves the application of heat to improve circulation, relax muscles, and alleviate pain. These treatments can be applied through various methods such as ice packs, hot water bottles, heating pads, and cold compresses.

Learn more about therapeutic here:

https://brainly.com/question/3183317

#SPJ11

The Bell Telephone Company, which for decades was the only provider of telephone service in the United States, was an example of a monopoly.

As a monopoly, the Bell Telephone Company had exclusive control over the telephone service market in the country, allowing it to charge high prices and offer limited options to consumers. However, in 1982, the company was broken up by the United States government in an antitrust lawsuit, which resulted in the creation of seven regional telephone companies known as the Baby Bells. This breakup opened up the market to competition, leading to lower prices and increased options for consumers.

learn more about bell telephone company, here:

https://brainly.com/question/28793150

#SPJ11

Combining the steps explained in the SQL lessons, it is possible to login as "tom".

Combining the steps learned in the SQL lessons allows one to perform an SQL injection attack and gain unauthorized access as the user "tom." SQL injection involves exploiting vulnerabilities in a web application's database layer by injecting malicious SQL code into user inputs.

By carefully crafting SQL statements, an attacker can manipulate the application's logic and bypass authentication mechanisms. This attack can be prevented by using prepared statements or parameterized queries to sanitize user inputs and enforce proper access controls.

Secure coding practices and regularly updating software can significantly reduce the risk of SQL injection vulnerabilities.

Learn more about lessons

brainly.com/question/732141

#SPJ11

The entry to record the disposal of a laptop computer with a cost of $2500 and an accumulated depreciation of $1500 would be a two-step process.

First, you need to remove the laptop's cost and accumulated depreciation from the books. This is done by crediting the asset account (Laptop) for $2500 and debiting the accumulated depreciation account for $1500.

Next, you need to record the loss or gain on disposal. In this case, since the laptop's net book value ($1000) exceeds its estimated residual value, a loss is recognized. To record this, you would debit the loss on disposal account and credit the cash or other disposal proceeds account. The amount recorded in these accounts will be the difference between the net book value and the proceeds received from the disposal.

Overall, the journal entries would be:
1. Debit Accumulated Depreciation - Laptop for $1500.
2. Credit Laptop for $2500.
3. Debit Loss on Disposal for the difference between the net book value and the proceeds.
4. Credit Cash or other disposal proceeds account for the proceeds received.

learn more about  disposal of a laptop  here:

https://brainly.com/question/28234440

#SPJ11

The capacity of the array elements' underlying storage can be modified through the use of the resize() method found within the DynamicArray class.

The Method only accepts positive integers for new capacity and must not be smaller than the current number of elements in the dynamic array.

So,  It checks if new capacity is positive and greater than current size. If not, we exit. Else, I make a temp array to hold the current elements. One can move elements to temp using a loop and update DynamicArray's capacity. I create a new self.data array with new capacity and set all elements to None, then copy elements from temp back to self.data using another loop.

Learn more about  Array class from

https://brainly.com/question/29974553

#SPJ4

A list of approved digital certificates is called a Certificate Authority (CA) list. This is a critical component of the public key infrastructure (PKI) system that ensures secure communication over the internet. The CA list includes the names of trusted certificate authorities that have been verified and authorized to issue digital certificates. These certificates are used to authenticate the identity of websites, individuals, and organizations in online transactions. The CA list is constantly updated to ensure that only trustworthy CAs are included, and that certificates issued by these CAs are valid and reliable. In conclusion, the CA list plays a vital role in maintaining the security and integrity of online communication.

This list contains the trusted root certificates issued by various Certificate Authorities. The CA Trust List ensures secure and trusted connections between users and websites, as it verifies the authenticity of a website's digital certificate. In conclusion, maintaining an up-to-date CA Trust List is crucial for ensuring online security and establishing trust between users and websites.

To know more about Certificate Authority visit:

https://brainly.com/question/31306785

#SPJ11

False. Biometrics does not include physical credentials such as smart cards and barcodes.

Biometrics refers to the measurement and analysis of unique physical or behavioral characteristics of individuals for identification or authentication purposes. It involves using biological or behavioral traits, such as fingerprints, iris patterns, voice recognition, or facial features, to establish and verify someone's identity.

Physical credentials like smart cards and barcodes, on the other hand, fall under the category of traditional identification methods and are not considered biometric technologies. Smart cards are typically plastic cards embedded with a microchip that stores and transmits information, while barcodes are graphical representations of data that can be scanned using optical scanners.

Biometrics relies on individual characteristics that are unique to each person and are difficult to forge or replicate. It offers a higher level of security and accuracy compared to traditional identification methods like smart cards and barcodes, which can be lost, stolen, or easily duplicated.

Learn more about Biometrics here:

https://brainly.com/question/30762908

#SPJ11

Remote users do not need to manually initiate a VPN connection each time they wish to connect to the resources in their organization when using DirectAccess. DirectAccess provides seamless and transparent access to resources for remote users without the need for a manual VPN connection.

The statement is false.

In the case of DirectAccess, remote users do not need to manually initiate a VPN connection each time they wish to connect to the resources in their organization. DirectAccess provides seamless and automatic connectivity for remote users by establishing a secure connection between the user's device and the organization's network whenever an internet connection is available. This eliminates the need for manual VPN initiation, allowing users to access organizational resources without explicit user intervention. DirectAccess provides a more convenient and transparent remote access experience for users while maintaining a secure connection to internal resources.

Learn more about VPN: https://brainly.com/question/14122821

#SPJ11

To count the number of one-to-one functions from A to C, we need to find how many ways we can map each element of A to an element of C without mapping two distinct elements of A to the same element of C.

Since A has 4 elements and C has 5 elements, the first element of A can be mapped to any of the 5 elements of C, the second element of A can be mapped to any of the remaining 4 elements of C, the third element of A can be mapped to any of the remaining 3 elements of C, and the fourth element of A can be mapped to any of the remaining 2 elements of C. Therefore, the number of one-to-one functions from A to C is 5 x 4 x 3 x 2 = 120.To count the number of onto functions from A to C, we need to find how many ways we can map each element of A to an element of C such that each element of C is the image of at least one element of A. Since C has 5 elements, the number of onto functions from A to C is equal to the number of surjections from a set of size 4 to a set of size 5. This number is given by the formula for the number of surjections, which is 5^4 - 5 x 4^3 + 10 x 3^3 - 10 x 2^3 + 5 x 1^3 = 310.To count the number of one-to-one and onto functions from B to B, we need to count the number of permutations of a set of size 10, which is given by 10! = 3,628,800.

To know more about element click the link below:

brainly.com/question/32182519

#SPJ11

A wide area network (WAN) is a network that covers a large geographical area, connecting multiple local area networks (LANs) in different locations. The main purposes for a WAN are to provide corporate access to the internet, to ensure secured access from each office in different cities.

One of the primary purposes of a WAN is to provide corporate access to the internet. This allows the company to connect to external networks, access online resources, and communicate with customers and clients.

Know more about the wide area network (WAN)

https://brainly.com/question/1167985

#SPJ11

To link a utility created in C with a MySQL database, the developer would use the MySQL Connector/C component. This component provides a C API for accessing and manipulating MySQL databases.

It allows the developer to establish a connection to the MySQL server, execute SQL queries and retrieve results, as well as manage transactions and handle errors. The Connector/C component is available for various platforms and can be downloaded from the official MySQL website. With this component, the developer can seamlessly integrate their C utility with a MySQL database and create powerful and efficient applications.
A developer looking to link a C utility to a MySQL database would use the MySQL Connector/C. This component is a library that enables C applications to connect to the MySQL database and perform various operations such as querying, inserting, and updating data. The Connector/C provides a set of functions and structures, allowing the developer to easily interact with the database and manage the connection. To use this component, the developer needs to include the relevant header files, compile and link the program with the MySQL Connector/C library. This way, the C utility can communicate with the MySQL database efficiently.

For more information on MySQL visit:

brainly.com/question/13267082

#SPJ11

Yes, the process described is known as encryption. Encryption involves encoding data in such a way that it becomes unreadable or unintelligible to unauthorized individuals. The purpose of encryption is to ensure the confidentiality and privacy of the information being transmitted or stored.

The process typically involves using an encryption algorithm and a secret key to convert the plaintext (original message) into ciphertext (scrambled and unreadable message). Only individuals possessing the correct key can decrypt the ciphertext back into the original plaintext and access the information. Encryption is widely used in various applications, including secure communication channels, data storage, password protection, and online transactions. It serves as a fundamental technique to protect sensitive and valuable information from unauthorized access or interception.

learn more about Encryption here:

https://brainly.com/question/28283722

#SPJ11

The total array of char* strings[10] is 40 bytes. So, the option is D.

A processor, also known as a central processing unit (CPU) is responsible for executing software applications and managing hardware resources like memory and input/output devices.

Bytes are measurement units used to represent computer storage in digital systems. A byte is a sequence of 8 bits that can represent a single alphanumeric character, symbol, or small amount of numerical data. In computer storage, a byte is used as the basic unit of measurement, with larger units such as kilobytes (KB), megabytes (MB), gigabytes (GB), and so on.

Assuming a 32-bit processor, each pointer in the array will be 4 bytes. There are 10 pointers in the array, so the total size of the array will be:

4 bytes x 10 pointers = 40 bytes.

Therefore, the answer is d. 40.

To know more about Processor visit:

https://brainly.com/question/28255343

#SPJ11

The purpose of the described deterministic finite state machine (DFSM) is to accept strings over the alphabet {a, b, c}* that contain at least two b's and at least one a.

The given statement describes a deterministic finite state machine (DFSM) that accepts strings over the alphabet {a, b, c}* with specific conditions.

The DFA should recognize strings that have at least two occurrences of the letter 'b' and at least one occurrence of the letter 'a'.

The FSM will have states representing different conditions of the string, transitions based on the input letters, and accepting states to identify valid strings.

By following the transitions and updating the state accordingly, the FSM will determine whether a given string satisfies the specified conditions or not.

Learn more about deterministic finite state machine

brainly.com/question/32232156

#SPJ11

A linked list is a linear data structure consisting of nodes, each containing a data element and a reference (or pointer) to the next node. It allows for efficient insertion and deletion of elements, but has slower access times than arrays.

Sure, here's a possible implementation of the "remove" method that removes and returns the last value from a linked list:

```
public Object remove(LinkedList list) {
   if (list.isEmpty()) {
       throw new NoSuchElementException("Cannot remove from an empty list");
   }
   Node prev = null;
   Node curr = list.head;
   while (curr.next != null) {
       prev = curr;
       curr = curr.next;
   }
   if (prev == null) { // removing the only element
       list.head = null;
   } else {
       prev.next = null;
   }
   return curr.value;
}


- The method takes a LinkedList object as input, assuming it has a "head" field that points to the first node of the list.
- First, it checks if the list is empty, in which case it throws a NoSuchElementException.
- Then, it uses two pointers "prev" and "curr" to traverse the list until the last node (i.e., the one whose "next" field is null).
- Once the last node is found, the method returns its "value" field, which is assumed to be an Object (you can replace it with a more specific type if needed).
- Before returning the value, the method updates the "next" field of the second-to-last node (i.e., "prev.next") to null, effectively removing the last node from the list.
- If the list has only one element (i.e., "prev" is still null), the method sets the "head" field of the list to null, since there is no more node in the list.

To know more about linked list visit:

https://brainly.com/question/28938650

#SPJ11

The objective of the assignment is to create a web page with formatted content, additional form fields, styling, JavaScript form processing, user input validation, and displaying results related to the topic of "Wearable Technologies."

The given assignment requires creating a web page titled "homework11.html" within the "pages" folder of a homework project. The page should be created from scratch, utilizing a variety of HTML elements and attributes to format the content.

Additional form fields need to be added, including different types of fields, such as radio buttons. The content and form fields should be styled using both embedded and external style sheets, with original styles.

The form should be processed using JavaScript, with user input validation and functions to handle form processing. The results should be displayed on the web page and in a dialogue window. The topic for this web page is "Wearable Technologies."

Learn more about objective

brainly.com/question/12569661

#SPJ11

A device that knows how to forward traffic between independent networks is known as a router.

Explanation:

1. Router: A router is a network device that connects multiple networks and forwards data packets between them. It operates at the network layer (Layer 3) of the OSI model and makes intelligent decisions based on network addressing information to determine the most appropriate path for data transmission. Routers use routing tables and algorithms to efficiently direct traffic between networks.

2. Switch: A switch is a network device that connects devices within a single network. It operates at the data link layer (Layer 2) of the OSI model and uses MAC addresses to direct data packets to the appropriate destination within the same network. Switches are primarily responsible for creating and managing local area networks (LANs).

3. Hub: A hub is an older and less sophisticated network device that connects multiple devices within a network. It operates at the physical layer (Layer 1) of the OSI model and simply broadcasts incoming data packets to all connected devices. Hubs do not have the intelligence to differentiate between devices or forward traffic based on addresses, resulting in inefficient data transmission and increased network collisions.

4. Node: In networking, a node refers to any active device connected to a network. It can represent a computer, server, printer, switch, router, or any other network-enabled device.

Out of the provided options, the correct term for a device that forwards traffic between independent networks is a router. Routers are designed to handle the complexities of interconnecting different networks, ensuring efficient and secure data transmission across network boundaries.

To know more about router, please click on:

https://brainly.com/question/13600794

#SPJ11

The proof for SUBSET-SUM being NP-complete relies on the fact that the numbers in the input are in binary representation. However, in UNARY-SSUM, all numbers are represented in unary, which means that a number N is represented as N 1's.

This means that the input size for UNARY-SSUM is not polynomially related to the input size for SUBSET-SUM.

To show that UNARY-SSUM is still in NP, we can provide a polynomial time verifier that checks whether a given subset of unary numbers sums up to a target value. The verifier simply needs to count the number of 1's in each number of the subset, and check whether their sum is equal to the target value, which can be done in polynomial time.

Therefore, UNARY-SSUM is in NP, but it is not known to be NP-complete since the reduction used for SUBSET-SUM does not work for UNARY-SSUM. A different proof would be required to establish NP-completeness for UNARY-SSUM.

To know more about UNARY visit:

https://brainly.com/question/30896217

#SPJ11