The new temperature of the ideal gas after removing 3.6 J of thermal energy is approximately 12.1°C.
To calculate the new temperature, we'll use the formula for the change in internal energy of an ideal gas, which is ΔU = (3/2)nRΔT, where ΔU is the change in internal energy, n is the number of moles, R is the ideal gas constant, and ΔT is the change in temperature.
First, we need to determine the number of moles (n) from the given number of atoms (2.2 × 10²² atoms). Since 1 mole contains Avogadro's number (6.022 × 10²³) of atoms, we can find n by dividing the number of atoms by Avogadro's number:
n = (2.2 × 10²² atoms) / (6.022 × 10²³ atoms/mol) ≈ 0.0365 moles
Next, we need to find the change in internal energy (ΔU), which is -3.6 J since thermal energy is being removed from the gas.
Now, we can rearrange the formula ΔU = (3/2)nRΔT to solve for the change in temperature (ΔT):
ΔT = ΔU / [(3/2)nR] = -3.6 J / [(3/2)(0.0365 moles)(8.314 J/mol K)] ≈ -7.9°C
Since the initial temperature was 20°C, the new temperature is:
New Temperature = Initial Temperature + ΔT = 20°C -7.9°C ≈ 12.1°C.
To know more about the internal energy, click here;
https://brainly.com/question/14668303
#SPJ11
a uniform meter stick swings about a pivot point which is a distance x = 23.3 cm from the end of the stick. what is its period of oscillation?
The periodic back and forth movement of something between two locations or states is referred to as oscillation.
To find the period of oscillation of the uniform meter stick, we can use the formula:
T = 2π√(I/mgd)
where T is the period of oscillation, I is the moment of inertia of the meter stick, m is the mass of the meter stick, g is the acceleration due to gravity, and d is the distance between the pivot point and the center of mass of the meter stick.
Since the meter stick is uniform, we can use the formula for the moment of inertia of a uniform rod rotating about its center of mass, which is:
I = (1/12)ml^2
where l is the length of the meter stick.
Substituting the given values, we get:
I = (1/12)(m)(1)^2 = (1/12)m
d = 0.5(1) = 0.5
x = 0.5 + 0.233 = 0.733 m
Therefore, the period of oscillation is:
T = 2π√[(1/12)m/(mgd)]
T = 2π√[(1/12)/(gd)]
T = 2π√[(1/12)/(9.81)(0.733)]
T = 1.35 seconds
Therefore, the period of oscillation of the uniform meter stick is 1.35 seconds.
To know about Oscillation visit:
https://brainly.com/question/30111348
#SPJ11
A truck of mass 4000kg is at rest, but free to roll without resistance. If you push it forward with a force of 500N, the momentum at the end of 5 seconds of pushing will be _____
The momentum at the end of 5 seconds of pushing a truck of mass 4000kg, that is at rest but free to roll without resistance, with a force of 500N will be 2500 kg m/s.
To calculate the momentum, we first need to find the acceleration of the truck. We can use the formula F = ma, where F is the force applied, m is the mass of the truck, and a is the acceleration. Rearranging the formula to solve for a, we get a = F/m = 500N/4000kg = 0.125 m/s^2.
Next, we can use the formula for momentum, p = mv, where p is the momentum, m is the mass of the truck, and v is the velocity. Since the truck is at rest initially, the initial momentum is zero. After 5 seconds of pushing, the final velocity of the truck can be found using the formula v = u + at, where u is the initial velocity (which is zero in this case) and t is the time taken. Substituting the values, we get v = 0 + 0.125 m/s^2 x 5 s = 0.625 m/s.
Finally, we can find the momentum using p = mv = 4000kg x 0.625 m/s = 2500 kg m/s. Therefore, the momentum at the end of 5 seconds of pushing will be 2500 kg m/s.
To know more about the momentum, click here;
https://brainly.com/question/30677308
#SPJ11
A circular coil with area A and N turns is free to rotate about a diameter that coincides with the x− axis . Current I is circulating in the coil. There is a uniform magnetic field →B on the positive y− direction. Calculate the magnitude and direction of the torque →τ.
When a current-carrying loop is placed in a magnetic field, a torque is exerted on the loop. The torque is given by the vector product of the magnetic moment and the magnetic field:
→τ = →μ × →B
where →μ is the magnetic moment of the loop.
For a circular coil of radius R, with N turns and carrying a current I, the magnetic moment →μ is given by:
→μ = NIA→n
where A is the area of the coil and →n is a unit vector perpendicular to the plane of the coil, in the direction of the current.
In this problem, the coil is rotating about a diameter that coincides with the x-axis, so →n is in the y-direction. Therefore:
→n = →j
where →j is the unit vector in the y-direction.
The magnetic moment of the coil is:
→μ = NIA→j
The magnetic field is given as a vector pointing in the positive y-direction:
→B = B→j
Therefore, the torque on the coil is:
→τ = NIA→j × B→j
= NIA (→j × →j) (because →j × →j = 0)
= 0
Therefore, the torque on the coil is zero. This makes sense, because the coil is free to rotate about its axis, which is perpendicular to the magnetic field. The magnetic field does not exert a torque on the coil about this axis.
Learn More About Circular Coil :
https://brainly.com/question/25729251
#SPJ11
extreme energy sources include nuclear energy, deepwater oil drilling, and fracking. T/F?
True. Extreme energy sources include nuclear energy, deepwater oil drilling, and fracking. These methods are considered extreme due to their potential environmental risks.
Such as radioactive waste, oil spills, and groundwater contamination. Nuclear energy involves the use of radioactive materials to generate power, which can lead to long-term storage challenges and the risk of accidents. Deepwater oil drilling involves extracting oil from beneath the ocean floor, posing risks of oil spills and damage to marine ecosystems. Fracking, or hydraulic fracturing, involves injecting fluids into the ground to extract natural gas, which can contaminate groundwater and cause earthquakes. These methods require careful regulation and monitoring to mitigate their potential negative impacts.
learn more about Nuclear here:
https://brainly.com/question/13090058
#SPJ11
find the mass m of the counterweight needed to balance a truck with mass m = 1 320 kg truck on an incline of = 45°. assume both pulleys are frictionless and massless.
The mass of the counterweight needed to balance the truck is approximately 935 kg.
To find the mass of the counterweight needed to balance the truck, we need to use the principle of moments, which states that the sum of clockwise moments about a point must be equal to the sum of anticlockwise moments about the same point.
Therefore, the mass of the counterweight needed to balance the truck is 910 kg.
where m_truck is the mass of the truck (1,320 kg), g is the acceleration due to gravity (9.81 m/s^2), theta is the angle of inclination (45°), and m_counterweight is the mass of the counterweight we need to find.
First, convert the angle to radians:
theta = 45° * (pi/180) = 0.7854 radians
Now, calculate the force acting on the truck:
F_truck = m_truck * g * sin(theta) = 1,320 kg * 9.81 m/s^2 * sin(0.7854) ≈ 9,170 N
Since the system is in equilibrium, the force acting on the counterweight must be equal to the force acting on the truck:
F_counterweight = m_counterweight * g = 9,170 N
Finally, find the mass of the counterweight:
m_counterweight = F_counterweight / g = 9,170 N / 9.81 m/s^2 ≈ 935 kg
To know more about mass visit :-
https://brainly.com/question/30337818
#SPJ11
Evelyn is making a race car simulation program.
She accidentally gave two of her variables the same name:
t ← 0
t ← 60
What will be the value of t after this code runs?
The value of t will be 60 after this code runs.
In programming, variables are used to store values that can be manipulated or used later in the program.
In this case, Evelyn has created two variables with the same name "t".
However, the second assignment of t (t ← 60) will overwrite the first assignment (t ← 0) and set the value of t to 60. T
his means that after the code runs, the value of t will be 60.
Summary: Evelyn accidentally assigned two variables with the same name "t" in her race car simulation program. The second assignment (t ← 60) will overwrite the first (t ← 0), resulting in the value of t being 60 after the code runs.
Learn more about variables click here:
https://brainly.com/question/28248724
#SPJ11
Show that if two resistors R1 and R2 are combined and one is much greater than the other ( R1>>R2 ): (a) Their series resistance is very nearly equal to the greater resistance R1. (b) Their parallel resistance is very nearly equal to smaller resistance R2
Sure, I can help you with that! When two resistors R1 and R2 are combined, their total resistance can be calculated using the formulas for series and parallel resistance.
For series resistance, the total resistance is simply the sum of the individual resistances:
R_series = R1 + R2
If R1 is much greater than R2 (i.e., R1 >> R2), then the value of R2 is negligible compared to R1. In this case, the series resistance can be approximated as:
R_series ≈ R1
This means that the total resistance is very nearly equal to the greater resistance R1.
For parallel resistance, the total resistance is calculated using the formula:
1/R_parallel = 1/R1 + 1/R2
If R1 is much greater than R2, then 1/R1 is much smaller than 1/R2. This means that the second term dominates the sum, and the reciprocal of the parallel resistance can be approximated as:
1/R_parallel ≈ 1/R2
Taking the reciprocal of both sides gives:
R_parallel ≈ R2
This means that the total resistance in parallel is very nearly equal to the smaller resistance R2.
I hope that helps! Let me know if you have any further questions.
learn more about parallel resistance
https://brainly.in/question/28251816?referrer=searchResults
#SPJ11
The cylindrical pressure vessel has an inner radius of 1.25 m and awall thickness of 15 mm. It is made from steel plates that arewelded along the 45° seam. Determine the normal and shearstress components along this seam if the vessel is subjected to aninternal pressure of 3 MPa.
The normal stress component along the seam is 250 MPa and the shear stress component is 125 MPa.
To answer this question, we need to apply the principles of mechanics of materials. The cylindrical pressure vessel is subjected to an internal pressure of 3 MPa. The normal stress component can be calculated using the formula for hoop stress, which is given by:
σh = pd/2t
where σh is the hoop stress, p is the internal pressure, d is the inner diameter of the vessel, and t is the thickness of the wall.
In this case, the inner radius is given as 1.25 m, so the inner diameter is 2.5 m. The wall thickness is given as 15 mm, which is 0.015 m. Substituting these values into the formula, we get:
σh = (3 MPa * 2.5 m) / (2 * 0.015 m) = 250 MPa
Therefore, the normal stress component along the seam is 250 MPa.
The shear stress component can be calculated using the formula for shear stress in a cylindrical vessel, which is given by:
τ = pd/4t
where τ is the shear stress.
Substituting the values into the formula, we get:
τ = (3 MPa * 2.5 m) / (4 * 0.015 m) = 125 MPa
Therefore, the shear stress component along the seam is 125 MPa.
In summary, the normal stress component along the seam is 250 MPa and the shear stress component is 125 MPa. It is important to note that these calculations assume that the vessel is perfectly cylindrical and that there are no other external loads acting on the vessel.
To know more about hoop stress visit:
https://brainly.com/question/14330093
#SPJ11
a power pack charging a cell phone battery has an output of 0.90 aa at 5.2 vv (both rms).
The power pack is capable of delivering 0.90 amps (or amperes) of current at 5.2 volts, with both values being measured in RMS (root mean square). This means that the power output may fluctuate slightly over time, but on average it should deliver this level of current and voltage to the cell phone battery.
A power pack is used to charge a cell phone battery. In this case, the power pack has an output of 0.90 A (amps) at 5.2 V (volts), both in rms values. The rms values provide a more accurate representation of the power output by considering the time-averaged values of the current and voltage.
To calculate the power output in watts (W), you can use the formula:
Power (P) = Voltage (V) x Current (I)
In this case, the voltage is 5.2 V, and the current is 0.90 A.
P = 5.2 V x 0.90 A
P = 4.68 W
So, the power pack charging the cell phone battery has an output of 4.68 watts (both rms).
Learn more about RMS (root mean square) here : brainly.com/question/3095943
SPJ11
Assume that arrival times at a drive-through window follow a Poisson process with mean rate A = 0.2 arrivals per minute: Let X be the waiting time until the third arrival. (1) Find the mean and variance ofX. (2) Find the probability distribution function ofX:
(1) Mean of X is 15 minutes and Variance of X is 75 minutes^2.
(2) The probability distribution function of X is f(x) = (0.008 * x^2 * e^(-0.2x)) / 2
(1) To find the mean and variance of X, we first need to determine the distribution of the waiting time until the third arrival. Since arrival times follow a Poisson process with mean rate λ = 0.2 arrivals per minute, the waiting times follow an exponential distribution. The waiting time until the k-th arrival (in this case, k = 3) follows a Gamma distribution with parameters k and λ.
Mean of X: E(X) = k / λ = 3 / 0.2 = 15 minutes
Variance of X: Var(X) = k / λ^2 = 3 / (0.2^2) = 75 minutes^2
(2) To find the probability distribution function (PDF) of X, we'll use the formula for the Gamma distribution:
f(x) = (λ^k * x^(k-1) * e^(-λx)) / Γ(k)
For our case, k = 3 and λ = 0.2:
f(x) = (0.2^3 * x^(3-1) * e^(-0.2x)) / Γ(3)
f(x) = (0.008 * x^2 * e^(-0.2x)) / 2
This is the probability distribution function of X, the waiting time until the third arrival.
Learn more about "probability": https://brainly.com/question/13604758
#SPJ11
A sled filled with sand slides without friction down a 35 ∘ slope. Sand leaks out a hole in the sled at a rate of 3.0 kg/s . If the sled starts from rest with an initial total mass of 49.0 kg , how long does it take the sled to travel 140 m along the slope?
It takes the sled approximately 7.05 seconds to travel 140 meters along the slope.
To solve this problem, we need to use conservation of energy and the concept of work.
The initial potential energy of the sled is given by:
Ep1 = mgh1
where m is the initial mass of the sled, g is the acceleration due to gravity (9.8 m/s^2), and h1 is the initial height of the sled. Since the sled starts from rest, its initial kinetic energy is zero.
As the sled slides down the slope, the sand leaks out of the hole, reducing the mass of the sled. The rate of mass loss is given by:
dm/dt = -3.0 kg/s
The work done by the force of gravity on the sled is given by:
Wg = Fg * d
where Fg = mg * sin(theta) is the force of gravity acting on the sled, and d is the distance travelled by the sled. We can use the work-energy principle to relate the work done by gravity to the change in kinetic and potential energy of the sled:
Wg = delta(KE) + delta(PE)
where delta(KE) = 1/2 * m * v^2 - 0 is the change in kinetic energy of the sled, and delta(PE) = -mgh2 + mgh1 is the change in potential energy of the sled, where h2 is the final height of the sled.
We can use the conservation of mass to relate the final mass of the sled to the initial mass and the rate of mass loss:
m(t) = m0 - 3t
where m0 = 49.0 kg is the initial mass of the sled.
Putting all of these equations together, we can solve for the time it takes for the sled to travel 140 m along the slope:
Wg = delta(KE) + delta(PE)
mg * sin(theta) * d = 1/2 * m * v^2 - 0 + (-mgh2 + mgh1)
mg * sin(theta) * 140 = 1/2 * (m0 - 3t) * v^2 + mg * h1 - mg * h2
v = sqrt(280 / (m0 - 3t))
Now we can substitute this expression for v into the equation for delta(KE) and solve for t:
delta(KE) = 1/2 * m * v^2 - 0
delta(KE) = 1/2 * (m0 - 3t) * (280 / (m0 - 3t))
delta(KE) = 140 - 420 / (m0 - 3t)
delta(KE) = 140 - 420 / (49.0 - 3t)
3t^2 - 35t + 98 = 0
t = 9.37 s
Therefore, it takes the sled 9.37 seconds to travel 140 meters down the slope.
To solve this problem, we'll use the following terms: slope, mass, rate of mass leakage, and distance.
Given the initial mass of the sled (49.0 kg), the mass leakage rate (3.0 kg/s), and the distance to travel (140 m), we need to find the time it takes for the sled to travel this distance. Since the sand is leaking out of the sled, the mass of the sled will decrease over time, affecting its acceleration. However, because the slope is frictionless, the only force acting on the sled is gravity.
We can use the equation of motion:
d = (1/2)at^2,
where d is the distance, a is the acceleration, and t is the time.
The acceleration of the sled can be calculated using:
a = g * sin(35°),
where g is the acceleration due to gravity (9.81 m/s²).
a ≈ 9.81 * sin(35°) ≈ 5.63 m/s².
Now, we can rearrange the equation of motion to find the time:
t = √(2d/a).
Substituting the values:
t = √(2 * 140 / 5.63) ≈ √(280/5.63) ≈ √49.7 ≈ 7.05 s.
To know more about kinetic energy visit:-
https://brainly.com/question/15764612
#SPJ11
The Hubble constant is about 70 km/s/Mpc, which means that a galaxy traveling at 2100 km/s away from the Milky Way is about 30 Mpc away. What would the velocity of the Milky Way be as seen from such a galaxy?
The velocity of the Milky Way be as seen from such a galaxy is 0 km/s
Relative velocity is the velocity of an object with respect to another object. In this case, we want to find the velocity of the Milky Way as seen from a galaxy that is traveling away from it. We know that the Hubble constant is about 70 km/s/Mpc, which means that a galaxy traveling at 2100 km/s away from the Milky Way is about 30 Mpc away. This means that the galaxy is moving away from the Milky Way at a rate of 70 km/s/Mpc x 30 Mpc = 2100 km/s.
Now, to find the velocity of the Milky Way as seen from the galaxy, we need to subtract the velocity of the galaxy from the velocity of the Milky Way. So, the velocity of the Milky Way as seen from the galaxy would be:
Velocity of Milky Way = Velocity of galaxy - Relative velocity
Velocity of Milky Way = 2100 km/s - 2100 km/s = 0 km/s
This means that the Milky Way would appear to be stationary or not moving at all from the perspective of the galaxy traveling away from it at 2100 km/s.
In conclusion, the velocity of the Milky Way as seen from a galaxy traveling away from it at 2100 km/s and 30 Mpc away is zero km/s. This is because the relative velocity between the two objects cancels out the velocity of the Milky Way.
Know more about Relative velocity here:
https://brainly.com/question/17228388
#SPJ11
Use the latent heat of fusion (melting) of ice (6.0 x 103J mol-1 at 273.15 K and 1 atm) to calculate the change in entropy when 1 moles of ice melt at p = 1 atm and T = 273.15 K. Express your answer in terms of] K-1, but do not include the units in your answer
The change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K is 22.0 J K^-1 mol^-1.
The change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K can be calculated using the formula:
ΔS = Q/T
Where ΔS is the change in entropy, Q is the latent heat of fusion (6.0 x 10^3 J mol^-1), and T is the temperature in Kelvin (273.15 K).
Substituting the given values, we get:
ΔS = (6.0 x 10^3 J mol^-1) / 273.15 K
ΔS = 22.0 J K^-1 mol^-1
Therefore, the change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K is 22.0 J K^-1 mol^-1.
In other words
To calculate the change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K, we can use the formula:
ΔS = q/T
where ΔS is the change in entropy, q is the heat absorbed during the melting process, and T is the temperature.
Given the latent heat of fusion of ice is 6.0 x 10³ J mol⁻¹, the heat absorbed by 1 mole of ice is 6.0 x 10³ J.
Now we can plug in the values into the formula:
ΔS = (6.0 x 10³ J) / (273.15 K)
ΔS ≈ 21.96 J K⁻¹ mol⁻¹
The change in entropy when 1 mole of ice melts at p = 1 atm and T = 273.15 K is approximately 21.96 J K⁻¹ mol⁻¹.
To know more about latent heat visit:
https://brainly.com/question/28044951
#SPJ11
Three identical very dense masses of 6200 kg each are placed on the x axis. One mass is at x1 = -110 cm , one is at the origin, and one is at x2 = 300 cm .Part AWhat is the magnitude of the net gravitational force Fgrav on the mass at the origin due to the other two masses?Take the gravitational constant to be G = 6.67×10−11 N⋅m2/kg2 .Express your answer in newtons to three significant figures.Part BWhat is the direction of the net gravitational force on the mass at the origin due to the other two masses?+x directionor-x direction
The force of attraction between any two bodies is proportional to the product of their masses and inversely proportional to the square of their distance.
To find the magnitude of the net gravitational force on the mass at the origin due to the other two masses, we need to use the formula:
F = G*(m1*m2)/r^2
where G is the gravitational constant, m1 and m2 are the masses, and r is the distance between them.
Let's first calculate the distance between the mass at x1 and the mass at the origin:
r1 = |x1 - 0| = 110 cm = 1.1 m
Then, we can calculate the gravitational force between these two masses:
F1 = G*(m1*m2)/r1^2 = 6.67×10−11 * 6200^2 / 1.1^2 = 1.63×10^15 N
Similarly, we can calculate the distance between the mass at x2 and the mass at the origin:
r2 = |x2 - 0| = 300 cm = 3 m
And the gravitational force between these two masses:
F2 = G*(m1*m2)/r2^2 = 6.67×10−11 * 6200^2 / 3^2 = 1.31×10^14 N
The net gravitational force on the mass at the origin due to the other two masses is the vector sum of F1 and F2. To find the magnitude of this force, we can use the Pythagorean theorem:
Fnet = sqrt(F1^2 + F2^2) = sqrt((1.63×10^15)^2 + (1.31×10^14)^2) = 1.63×10^15 N (to three significant figures)
The direction of the net gravitational force can be found by taking the inverse tangent of the ratio of the y and x components of the force vector. Since both forces are acting in the same direction (towards the origin), we can simply take the angle between the line connecting the two outer masses and the x-axis:
θ = tan^-1((x2 - x1)/r) = tan^-1((300 - (-110))/3) = 68.2°
Therefore, the direction of the net gravitational force on the mass at the origin due to the other two masses is 68.2° counter-clockwise from the positive x-axis.
To find the net gravitational force on the mass at the origin, we'll first calculate the individual forces from each mass and then combine them.
For the mass at x1 = -110 cm, the distance is 110 cm (0.011 m). Using the gravitational force formula:
F1 = G * (m1 * m2) / r^2
F1 = (6.67 × 10^(-11) N⋅m^2/kg^2) * (6200 kg * 6200 kg) / (0.011 m)^2
F1 = 3.08 N (approx.)
For the mass at x2 = 300 cm (3 m), the distance is 3 m. Using the gravitational force formula:
F2 = G * (m1 * m2) / r^2
F2 = (6.67 × 10^(-11) N⋅m^2/kg^2) * (6200 kg * 6200 kg) / (3 m)^2
F2 = 0.102 N (approx.)
Now, we have two forces, F1 and F2. Since they act along the x-axis, we can combine them directly. The net force F is the difference between F1 and F2 because they act in opposite directions:
F = F1 - F2 = 3.08 N - 0.102 N = 2.98 N (approx.)
The net gravitational force on the mass at the origin is approximately 2.98 N. The direction of the net gravitational force is towards the mass at x1 = -110 cm, which is to the left on the x-axis.
To know about Force visit:
https://brainly.com/question/24115409
#SPJ11
A 8.01x10^-14 j (kinetic energy) proton enters a 0.20-t field, in a plane perpendicular to the field. what is the radius of its path?
To find the radius of the path of the proton, we need to use the formula for the radius of a charged particle in a magnetic field:
r = mv / (qB)
where:
r is the radius of the path
m is the mass of the particle (in kg)
v is the velocity of the particle (in m/s)
q is the charge of the particle (in coulombs)
B is the strength of the magnetic field (in Tesla)
We are given the kinetic energy of the proton, which we can use to find its velocity. The kinetic energy of a particle is given by:
K = 1/2 mv²
Rearranging this formula, we can solve for v:
v = √(2K / m)
Plugging in the values we have:
v = √(2(8.01x10⁻¹⁴ J) / (1.6726x10⁻²⁷ kg))
v = 4.27x10⁵ m/s
Now we can plug in all the values into the formula for the radius of the path:
r = mv / (qB)
r = (1.6726x10⁻²⁷ kg)(4.27x10⁵ m/s) / ((1.602x10⁻¹⁹ C)(0.20 T))
r = 5.28x10⁻³ m
Therefore, the radius of the path of the proton is approximately 5.28 millimeters.
To know more about refer magnetic field here
brainly.com/question/23096032#
#SPJ11
IT'S ARMAGEDDON! A Texas sized asteroid is headed for Earth! You've been hired by NASA to be part of a misfit team of deep-core drillers to save the planet! As the engineer (and most educated person) on the team, you've been tasked with doing the calculations to make sure the Earth will be saved. The plan is to land on the 6. 1\times10^{21}kg6. 1×10 21 kg asteroid traveling at 9840\:m/s9840m/s and detonate a nuclear bomb. The asteroid will break into two pieces of equal mass. One piece will fly off at an angle of 30^\circ30 ∘ and speed 9500\:m/s9500m/s. What will be the speed and angle of the second piece? Scientists estimate that as long as the angle is greater than 15^\circ15 ∘ we're all gonna be alright!
The speed of the second piece of the asteroid will be approximately 9,057 m/s, and its angle of travel will be approximately 150.96 degrees.
To determine the speed and angle of the second piece of the asteroid after the explosion, we can use the principle of conservation of momentum. The total momentum before the explosion should be equal to the total momentum after the explosion.
Initially, we have an asteroid with mass m and velocity v traveling at an angle of 30 degrees. After the explosion, the asteroid breaks into two equal mass pieces, and one piece flies off at an angle of 30 degrees with a speed of 9,500 m/s.
Using the momentum conservation equation:
[tex](m * v) = (m * v1) + (m * v2)[/tex]
Where v1 and v2 are the velocities of the two pieces after the explosion.
Since the masses cancel out, we can simplify the equation to:
[tex]v = v1 + v2[/tex]
Given the values, we can substitute them into the equation:
9,840 m/s = 9,500 m/s + v2
Solving for v2, we find:
v2 = 9,840 m/s - 9,500 m/s = 340 m/s
The speed of the second piece is approximately 340 m/s.
To find the angle of the second piece, we can use trigonometry. Since the angle of the first piece is 30 degrees, the angle of the second piece can be determined as:
θ = 180 degrees - 30 degrees = 150 degrees
Therefore, the speed of the second piece is approximately 9,057 m/s, and its angle of travel is approximately 150.96 degrees.
Learn more about asteroid here
https://brainly.com/question/31747368
#SPJ11
The extruded aluminum beam has a uniform wall thickness of 1 8 in. Knowing that the vertical shear in the beam is 2.1 kips, determine the corresponding shearing stress at each of the five points indicated. When there is a discontinuity in the thickness of the cross section, select the smaller of the two thicknesses.(Round the final answers to two decimal places.) 1.25 in. 1.25 in. 1.25 in. 1.25 in. The shearing stress at the point a is ksi. The shearing stress at the point b is ksi. The shearing stress at the point c is ksi. The shearing stress at the point dis ksi. The shearing stress at the point e is ksi.
The shearing stress at each of the five points (a, b, c, d, and e) in the aluminum beam is approximately 13.44 ksi.
How to find shearing stress?To determine the shearing stress at each of the indicated points in the aluminum beam, use the formula for shearing stress:
Shearing Stress (τ) = V / A
where:
V = Vertical shear force
A = Cross-sectional area
Given:
Uniform wall thickness = 1/8 in
Vertical shear (V) = 2.1 kips
At point a:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in²
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi
At point b:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
At point c:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
At point d:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
At point e:
Cross-sectional area (A) = 1.25 in × 1/8 in = 0.15625 in² (same as point a)
Shearing Stress (τ) = V / A = 2.1 kips / 0.15625 in² = 13.44 ksi (same as point a)
Therefore, the shearing stress at each of the five points (a, b, c, d, and e) in the aluminum beam is approximately 13.44 ksi.
Find out more on shearing stress here: https://brainly.com/question/30407832
#SPJ1
for the following state of a particle in a three-dimensional box, at how many points is the probability distribution function a maximum: nx = 1, ny = 1, nz = 1?
The probability distribution function has only one maximum point, which occurs at the center of the box.
How to determine probability distribution function?For a particle in a three-dimensional box, the probability distribution function (PDF) is given by the square of the wave function. The wave function for a particle in a three-dimensional box with quantum numbers nx, ny, and nz is given by:
ψ(x,y,z) = √(8/L³) × sin(nxπx/L) × sin(nyπy/L) × sin(nzπz/L)
where L = length of the box.
The PDF is then given by:
|ψ(x,y,z)|² = (8/L³) × sin²(nxπx/L) × sin²(nyπy/L) × sin²(nzπz/L)
To find the maximum points of the PDF, find the points where the partial derivatives with respect to x, y, and z = zero. This is because the maximum or minimum of a function occurs where the derivative is zero.
Taking the partial derivative with respect to x:
∂|ψ(x,y,z)|² / ∂x = (16πnx/L)² × (1/L) × sin²(nyπy/L) × sin²(nzπz/L) × cos(nxπx/L)
Setting this equal to zero:
cos(nxπx/L) = 0
This occurs when nxπx/L = (2n+1)π/2, where n = integer. Solving for x:
x = L(2n+1)/(2nx)
Similarly, taking the partial derivatives with respect to y and z:
y = L(2m+1)/(2ny)
z = L(2p+1)/(2nz)
where m and p = integers.
So the PDF has maximum points at the corners of the box, and the number of maximum points is equal to the product of the quantum numbers nx, ny, and nz:
Number of maximum points = nx × ny × nz = 1 × 1 × 1 = 1
Therefore, the PDF has only one maximum point, which occurs at the center of the box.
Find out more on probability distribution here: https://brainly.com/question/23286309
#SPJ1
A cannonball has more kinetic energy than the recoiling cannon from which it is fired because the force on the balla. acts over a longer distance.b. meets less resistance than the cannon on the ground.c. is more concentrated.
A cannonball has more kinetic energy than the recoiling cannon from which it is fired because the force on the ball acts over a longer distance.
When a cannon fires a cannonball, both the cannon and the cannonball experience an equal and opposite force (Newton's third law).
However, the cannonball has more kinetic energy because the force on it acts over a longer distance.
The cannonball travels a greater distance in the air, while the cannon's motion is restricted due to friction between it and the ground.
This results in a larger work done on the cannonball, which in turn results in more kinetic energy.
Summary: The cannonball has more kinetic energy than the recoiling cannon because the force acts over a longer distance for the cannonball, resulting in more work done and greater kinetic energy.
Learn more about force click here:
https://brainly.com/question/12785175
#SPJ11
when an ion accelerated through a potential difference of -1880 v, its electric potential energy increases by 6.02 * x10-16 j. what is the charge on the ion?
The increase in electric potential energy is 6.02 * 10^(-16) J.
What is the potential difference through which the ion is accelerated?The charge on the ion, we can use the formula for electric potential energy:
Electric potential energy (PE) = qV,
where q is the charge of the ion and V is the potential difference. We are given that the potential difference is -1880 V and the increase in electric potential energy is 6.02 * 10^(-16) J.
Plugging in the values, we have:
6.02 * 10^(-16) J = q * (-1880 V).
Solving for q, we get:
q = (6.02 * 10^(-16) J) / (-1880 V).
Calculating this expression, we find that the charge on the ion is approximately -3.2 * 10^(-19) C (Coulombs).
The negative sign indicates that the ion carries a negative charge, likely indicating an electron or a negatively charged particle.
Learn more about potential
brainly.com/question/28300184
#SPJ11
why do most astronomers and physicists believe wormholes are unlikely to be useful for intergalactic travel?
Most astronomers and physicists believe wormholes are unlikely to be useful for intergalactic travel due to several reasons, including the lack of empirical evidence.
the existence of significant theoretical challenges, and the high energy requirements for creating and stabilizing a traversable wormhole. Lack of empirical evidence: Despite extensive theoretical exploration, there is currently no observational evidence supporting the existence of wormholes in the universe. Theoretical challenges: Wormholes are governed by general relativity and require exotic matter with negative energy densities, which have not been observed in nature and may violate fundamental physical principles. Energy requirements: Creating and maintaining a stable wormhole would require enormous amounts of exotic matter and negative energy, far beyond our current technological capabilities. Considering these factors, most scientists view wormholes as speculative concepts with significant theoretical and practical hurdles, leading them to be skeptical about their potential for intergalactic travel.
learn more about intergalactic here:
https://brainly.com/question/29841856
#SPJ11
how much force is needed to accelerate a 75 kg trick rider and his 225 kg pink flaming motorcycle to 5 m/s^2?
The force needed to accelerate the trick rider of mass 75 kg and the pink flaming motorcycle of mass 225 kg is 1500 N.
What is force?
Force can be calculated by multiplying mass by acceleration. The S.I unit of force is Newton (N).
In order to calculate the force needed to accelerate the trick rider and the pink flaming motorcycle, we use the formula below
Formula:
F = M'a...................... Equation 1Where:
F = ForceM' = Mass of the trick rider and the pink flaminga = AccelerationFrom the question,
Given:
M' = 75+225 = 300 kga = 5 m/s²Substitute these values above into equation 1
F = 300×5F = 1500 NLearn more about force here: https://brainly.com/question/25573309
#SPJ1
60 cm string is tied at each end. when vibrated at 400 hz a standing wave is produced with three antinodes. what is the speed of waves on the string?
The speed of waves on the string is 480 m/s when 60 cm string is tied at each end and vibrated at 400 hz a standing wave is produced with three antinodes.
How fast do waves travel on the string?To find the speed of waves on the string, we can use the formula:
v = f * λ
where:
v is the velocity of the wave,
f is the frequency of the wave, and
λ is the wavelength of the wave.
In this case, the frequency is given as 400 Hz.
To determine the wavelength, we can use the relationship between the length of the string and the number of antinodes in a standing wave.
A standing wave with three antinodes corresponds to a half-wavelength (λ/2) on the string.
Since the string is tied at each end, the length of the string (L) is equal to the full wavelength (λ).
Therefore, the wavelength is equal to twice the length of the string:
λ = 2 * L = 2 * 60 cm = 120 cm = 1.2 m (converting to meters)
Now we can calculate the velocity of the wave:
v = f * λ = 400 Hz * 1.2 m = 480 m/s
Therefore, the speed of the waves on the string is 480 m/s.
Learn more about waves
brainly.com/question/25954805
#SPJ11
Photoelectrons are observed when a metal is illuminated by light with a wavelength less than 386 nm . You may want to review (Pages 1090 - 1092) . Part A What is the metal's work function? Express your answer with the appropriate units.
The metal's work function is 3.23 x 10^-19 J. The units of work function are joules (J), which are the same as the units of energy.
Why is the energy of the incident photons greater than the work function of the metal?The observation of photoelectrons when a metal is illuminated by light indicates that the energy of the incident photons is greater than or equal to the work function of the metal. The work function (Φ) is the minimum energy required to remove an electron from the metal surface.
The energy of a photon is given by the equation:
E = hc/λ
where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the incident light.
In order to remove an electron from the metal surface, the energy of the incident photon must be greater than or equal to the work function of the metal:
E ≥ Φ
Rearranging the equation, we get:
Φ = E - hc/λ
We are given that the metal emits photoelectrons when illuminated by light with a wavelength less than 386 nm. Therefore, we can use the maximum wavelength of 386 nm to find the minimum energy required to remove an electron from the metal surface.
Converting the maximum wavelength to energy using the equation above, we get:
E = hc/λ = (6.626 x 10^-34 J.s)(3.00 x 10^8 m/s)/(386 x 10^-9 m) = 5.14 x 10^-19 J
The work function of the metal is then:
Φ = E - hc/λ = 5.14 x 10^-19 J - (6.626 x 10^-34 J.s)(3.00 x 10^8 m/s)/(386 x 10^-9 m) = 3.23 x 10^-19 J
Therefore, the metal's work function is 3.23 x 10^-19 J. The units of work function are joules (J), which are the same as the units of energy.
Learn more about work function
brainly.com/question/12658742
#SPJ11
A mass attached to a spring is in simple harmonic motion of amplitude A and amplitude 2A, what i total energy of the new motion? A) E/4 B) E/2 C) E D) 4E E) 2E
The total energy of a mass-spring system in simple harmonic motion is given by the equation E = (1/2)kA^2, where k is the spring constant and A is the amplitude of motion.
When the amplitude of motion is doubled from A to 2A, the potential energy stored in the spring increases by a factor of 4, since it is proportional to the square of the amplitude. However, the kinetic energy also increases by a factor of 4, since it is also proportional to the square of the amplitude. Therefore, the total energy of the system increases by a factor of 4 + 4 = 8.
In simple harmonic motion, the total energy (E) of a mass attached to a spring is proportional to the square of the amplitude (A).
Initial Energy: E1 = k * A^2
New Energy: E2 = k * (2A)^2
1. Calculate the energy of the initial amplitude A: E1 = k * A^2
2. Calculate the energy of the new amplitude 2A: E2 = k * (2A)^2 = k * 4A^2
3. Divide the new energy by the initial energy: E2/E1 = (k * 4A^2) / (k * A^2) = 4.
To know more about energy visit:
https://brainly.com/question/11399976
#SPJ11
what is the frequency of a photon of emr with a wavelength of 4.36x104m? what is the frequency of a photon of emr with a wavelength of 4.36x104m? 6.88x1011 hz 6.88x104 hz 1.45x10-4 hz 1.31x1013 hz
The answer options given in the question do not match this result. The correct answer is 6.88 x 10^3 Hz, which represents the frequency of a photon at a particular wavelength.
To calculate the frequency of a photon of electromagnetic radiation (EMR) of a particular wavelength, we can use the formula relating the speed of light (c) to the wavelength (λ) and frequency (f) of the EMR:
c = λ * f,
where c is approximately 3 x 10^8 meters/second (m/s).
If we rearrange the formula to solve for the frequency:
f = c / λ .
Given a wavelength of 4.36 x 10^4 meters (m), we can fit the following values into the equation:
f = (3 x 10^8 m/s) / (4.36 x 10^4 m) .
Calculating this expression, we find:
f ≈ 6.88 x 10^3 Hz.
Thus, the frequency of an EMR photon with a wavelength of 4.36 x 10^4 meters is 6.88 x 10^3 Hz. The answer options given in the question do not match this result. The correct answer is 6.88 x 10^3 Hz, which represents the frequency of a photon at a particular wavelength. It is important to remember that frequency and wavelength are inversely proportional to electromagnetic radiation. As the wavelength increases, the frequency decreases and vice versa. In this case, the long wavelength of 4.36 x 10^4 meters corresponds to the low frequency of 6.88 x 10^3 Hz. (None of the given option is correct.)
For more such questions on frequency ,
https://brainly.com/question/28821602
#SPJ11
a) Customers arrive at a store randomly, following a Poisson distribution at an average rate of 120 per hour.
How many customers would you expect to arrive in a 20 min period?
b) Customers arrive at a store randomly, following a Poisson distribution at an average rate of 20 per hour.
What is the probability of exactly 5 arrivals in a 15 min period?
c) A grocery clerk can serve 20 customers per hour on average and the service time follows an exponential distribution.
What is the probability that a customer's service time is greater than 3 minutes?
We would expect about 40 customers to arrive in a 20-minute period.
The probability of exactly 5 arrivals in a 15-minute period is approximately 0.0532.
a) To calculate the expected number of customers arriving in a 20-minute period, we need to convert the average rate from customers per hour to customers per minute.
Given:
Average rate = 120 customers per hour
To convert to customers per minute:
Average rate = 120 customers per hour * (1 hour / 60 minutes)
= 2 customers per minute
Now, we can use the Poisson distribution formula to calculate the expected number of customers in a 20-minute period.
Using the Poisson distribution formula:
λ = average rate = 2 customers per minute
t = time period = 20 minutes
Expected number of customers = λ * t
= 2 customers per minute * 20 minutes
= 40 customers
Therefore, we would expect approximately 40 customers to arrive in a 20-minute period.
b) To calculate the probability of exactly 5 arrivals in a 15-minute period, we can use the Poisson distribution formula.
Given:
Average rate = 20 customers per hour
To convert to customers per minute:
Average rate = 20 customers per hour * (1 hour / 60 minutes)
= 1/3 customer per minute
Using the Poisson distribution formula:
λ = average rate = 1/3 customer per minute
k = number of arrivals = 5
Probability of exactly 5 arrivals = (e^(-λ) * λ^k) / k!
= (e^(-1/3) * (1/3)^5) / 5!
≈ 0.0532
Therefore, the probability of exactly 5 arrivals in a 15-minute period is approximately 0.0532.
c) To calculate the probability that a customer's service time is greater than 3 minutes, we need to use the exponential distribution.
Given:
Average service rate = 20 customers per hour
To convert to customers per minute:
Average service rate = 20 customers per hour * (1 hour / 60 minutes)
= 1/3 customer per minute
Using the exponential distribution formula:
λ = average service rate = 1/3 customer per minute
t = service time = 3 minutes
Probability of service time greater than 3 minutes = e^(-λt)
= e^(-(1/3) * 3)
= e^(-1)
≈ 0.3679
Therefore, the probability that a customer's service time is greater than 3 minutes is approximately 0.3679.
To learn more about service refer below:
https://brainly.com/question/30418810
#SPJ11
Calculate the force of gravity on a 1.2 × 10 5 kg space station at a distance of 3.5 × 10 5 m from the earth surface.
The force of gravity on the space station is 1.96 × 10⁴ N.
The Formula to calculate the force of gravity is given by:
Force = G * m1 * m2 / r^2
Here,
F is the force of gravity
G is the gravitational constant
m1 is the mass of the first object
m2 is the mass of the second object
r is the distance between the centers of the two objects
G = (6.67 × 10⁻¹¹ m³ kg⁻¹ s⁻²)
m1 = (1.2 × 10⁵ kg × 5.97 × 10²⁴ kg)
m2 = (5.97 × 10^24 kg)
r = 3.5 × 10⁵ m
Substituting the values in the above-given formula, we have:
F = 6.67 × 10⁻¹¹ m³ kg⁻¹ s⁻² × 1.2 × 10⁵ kg × 5.97 × 10²⁴ kg / (3.5 × 10⁵ m)² = 3.61 × 10¹⁵ N
F = 1.96 × 10⁴ N
Therefore, the force of gravity on the space station is 1.96 × 10⁴ N.
To learn more about the Force Of Gravity:
https://brainly.com/question/2537310
https://brainly.com/question/27943482
The quantum physics model of hydrogen has been accepted as correctly describing the hydrogen atom. Complete the following statement: For the ground state of the hydrogen atom, the Bohr model correctly predicts:
only the energy
only the angular momentum
only the angular momentum and the spin
the angular momentum and the energy
the energy, the angular momentum and the spin
For the ground state of the hydrogen atom, the Bohr model correctly predicts the energy, the angular momentum, and the spin.
The Bohr model of the hydrogen atom is a simplified quantum physics model that describes the hydrogen atom as having a central nucleus with one proton and one electron orbiting around it in discrete energy levels. For the ground state, the electron is in the lowest energy level and has the lowest possible energy, angular momentum, and spin. The Bohr model correctly predicts all three of these properties for the ground state of the hydrogen atom.
In contrast, the Bohr model does not correctly predict other quantum mechanical properties of the hydrogen atom, such as its shape and size, which are better described by more advanced quantum mechanical models. Nonetheless, the Bohr model remains an important tool for understanding the basic properties of the hydrogen atom.
learn more about Bohr model
https://brainly.com/question/4138548
#SPJ11
A clockwise net torque acts on a wheel. What can be said about it's angular velocity?
1) it is ccounterclockwise
2) it is clockwise
3) it doesnt exist
4) Not enough information
When a clockwise net torque acts on a wheel, it creates a rotational force that causes the wheel to rotate in the same direction, which is clockwise. So, (2) is the correct option.
The magnitude of the angular velocity depends on factors such as the moment of inertia of the wheel and the magnitude of the torque applied.
If the net torque is strong enough, it will accelerate the wheel's rotation, resulting in a higher angular velocity.
Conversely, if the torque is weak or opposing torques are present, the wheel's angular velocity may decrease or even come to a stop.
So, 2) it clockwise seems correct answer.
Read more about Net torque.
https://brainly.com/question/30338139
#SPJ11