As of 2018, how many space probes had flown past Uranus closely enough to take detailed pictures?

The screen is 2.28 mm far from the slit.

Width of central maximum = (wavelength * distance to screen) / width of slit

We are given the wavelength (600 nm = 0.6 μm),

                       the width of the slit (0.170 mm = 0.17 mm = 0.00017 m),

                       and the width of the central maximum (8.00 mm = 0.008 m).

We can solve for the distance to the screen:

distance to screen = (width of central maximum * width of slit) / wavelength

distance to screen = (0.008 m * 0.00017 m) / 0.6 μm

distance to screen = 0.00228 m = 2.28 mm

Therefore, the screen is 2.28 mm far from the slit.

Learn more about Wavelength https://brainly.com/question/10750459

#SPJ11

The kinetic energy of the car is joules or calories. To calculate the kinetic energy of the car, we first need to convert its mass from pounds (lb) to kilograms (kg).

We can do this by dividing the mass in pounds by 2.20462 (the conversion factor from pounds to kilograms).
mass of car = lb = lb / 2.20462 = kg
Next, we need to convert the speed of the car from miles per hour to meters per second. We can do this by multiplying the speed in miles per hour by 0.44704 (the conversion factor from miles per hour to meters per second).
speed of car = miles per hour = mph * 0.44704 = m/s
Now, we can use the following formula to calculate the kinetic energy of the car:
kinetic energy = 0.5 * mass * speed^2

Substituting the values we have calculated, we get:
kinetic energy = 0.5 * kg * (m/s)^2
kinetic energy = 0.5 * * (m/s)^2
kinetic energy = joules
To convert this value to calories, we can use the conversion factor of 1 joule = 0.239005736 calories.
kinetic energy = joules * 0.239005736
kinetic energy = calories

To know more about kinetic energy visit:-

https://brainly.com/question/15764612

#SPJ11

A coil with an inductance of 40.0 mH and a resistance of 5.00 linked to a 22.0-V battery can be used to study the relationship between the energy supplied by the battery, the power supplied to the resistance, and the energy stored in the magnetic field at t = 0 when the coil's current is 3.00 A.

Answers to the given questions are as follows :

(a) The rate at which energy is being delivered by the battery is given by the product of the battery voltage and the current, so it is P = VI = (22.0 V)(3.00 A) = 66.0 W.

(b) The power being delivered to the resistance of the coil is given by P = I²R = (3.00 A)²(5.00 Ω) = 45.0 W.

(c) The rate at which energy is being stored in the magnetic field of the coil is given by P = 1/2 LI² (where L is the inductance of the coil), so it is P = (1/2)(40.0 mH)(3.00 A)² = 1.08 W.

(d) The sum of the power being delivered to the resistance and the power being stored in the magnetic field must be equal to the power being delivered by the battery, so 66.0 W = 45.0 W + 1.08 W + [tex]P_{\text{magnetic}}[/tex], where [tex]P_{\text{magnetic}}[/tex] is the power being stored in the magnetic field.

(e) The relationship described in part (d) is true at all instants, since energy cannot be created or destroyed.

(f) Immediately after t = 0, all of the power delivered by the battery is being used to build up the magnetic field of the coil, so the power being stored in the magnetic field is equal to the power being delivered by the battery. Several seconds later, when the current has stabilized, the power being stored in the magnetic field is zero, and all of the power delivered by the battery is being dissipated as heat in the resistance of the coil.

To know more about the inductance refer here :

https://brainly.com/question/18575018#

#SPJ11

Answer:

12×8=848

Explanation:

repell forces

A) The kinetic energy released in this interaction is approximately 1.191 MeV.

B) Assuming equal sharing of energy and considering the masses of the proton and neutron to be 1.00 u, their speeds after photodisintegration can be calculated as approximately 4.44 × 10⁶ m/s.

A) The kinetic energy released can be calculated using the equation E = hc/λ, where E is the energy, h is the Planck's constant (6.626 × 10⁻³⁴ J·s), c is the speed of light (3.00 × 10⁸ m/s), and λ is the wavelength of the photon. By substituting the given values into the equation, we can calculate the energy released in joules. To convert it to MeV (mega-electron volts), we divide by 1.602 × 10⁻¹³ J/MeV.

B) The kinetic energy can be divided equally between the proton and neutron since they share the energy released in the interaction. By using the equation E = 0.5mv², where E is the kinetic energy, m is the mass, and v is the velocity, we can calculate the velocity (speed) of each particle. Given that their masses are assumed to be 1.00 u, the energy value obtained in part A can be divided equally between the two particles to calculate their individual speeds.

To learn more about kinetic energy, here

https://brainly.com/question/999862

#SPJ4

Answer:

A pendulum swings with amplitude 0.02 m and period of 2.0 s . The maximum speed of the pendulum is 0.62 m/s.

Explanation:

The maximum speed of the pendulum is achieved at the bottom of the swing, where all of the potential energy has been converted to kinetic energy. Using conservation of energy, we can find the maximum speed:

maximum speed = sqrt(2gh)

where g is the acceleration due to gravity and h is the maximum height of the swing. Since the amplitude of the swing is 0.02 m, the maximum height is also 0.02 m. Using g = 9.81 m/s^2, we get:

maximum speed = sqrt(2 * 9.81 m/s^2 * 0.02 m) = 0.62 m/s

Therefore, the maximum speed of the pendulum is 0.62 m/s.

To learn more about pendulum refer here:

https://brainly.com/question/14759840#

#SPJ11

The speed of transverse waves on the string is approximately 168 m/s.

To calculate the speed of transverse waves on the metal guitar string, we can use the formula:
v = sqrt(T/u)
where v is the speed of transverse waves, T is the tension in the string, and u is the linear mass density of the string.
Substituting the given values, we get: v = sqrt(90.0 N / 3.20 g/m) = 168 m/s
So the speed of transverse waves on the metal guitar string is 168 m/s.
To calculate the speed of transverse waves on the metal guitar string with a linear mass density (µ) of 3.20 g/m and a tension (T) of 90.0 N, use the following formula:
v = √(T/µ)
First, convert the linear mass density from grams to kilograms:
µ = 3.20 g/m * (1 kg/1000 g) = 0.00320 kg/m
Now, apply the formula:
v = √(90.0 N / 0.00320 kg/m) ≈ 168 m/s

To know more about waves visit :-

https://brainly.com/question/30783512

#SPJ11

a) E = (k * q) / (4πε₀r²), E = 0 (inside hollow), E = (k * q) / (4πε₀r²) (between spheres). c) Zero charge on the inner surface. d) Charge on the outer surface is -q. e) Field lines from a small sphere radiate outwards within a spherical volume of radius 2c towards the hollow sphere's outer surface.

a) Inside the small solid sphere (r < a), the electric field magnitude is given by E = (k * q) / (4πε₀r²), where k is the Coulomb's constant, q is the charge on the sphere, and ε₀ is the permittivity of free space. Inside the hollow sphere (a < r < b), the electric field is zero due to the cancellation of charges. Between the spheres (b < r < c), the electric field magnitude remains the same as inside the small sphere. c) The inner surface of the hollow sphere carries no charge since the charges on the inner and outer surfaces cancel each other out. d) The outer surface of the hollow sphere carries a charge of -q to maintain overall charge neutrality, as it balances the positive charge on the small solid sphere. e) The field lines within a spherical volume of radius 2c originating from the small sphere extend outward towards the outer surface of the hollow sphere, following the inverse square law and indicating the direction of the electric field.

Learn more about  electric field here:

https://brainly.com/question/11482745

#SPJ11

In Jack London's "To Build a Fire," the dog's final movement towards civilization is significant because it suggests that the dog recognizes the dangers of the natural world and has a desire to seek safety and security in human civilization.

This movement highlights the dog's intelligence and adaptation to its environment. It also suggests that the dog's relationship to nature is one of survival and instinct.

The dog is not driven by a conscious decision to seek civilization, but rather by a primal instinct to survive. This reinforces the theme of the harsh and unforgiving nature of the Yukon wilderness, where only the strongest and most adaptable can survive.

Overall, the dog's movement towards civilization symbolizes the tension between nature and civilization, and the struggle for survival in a hostile environment.

To learn more about movement, refer below:

https://brainly.com/question/2856566

#SPJ11

1.299 seconds is the approximate time  for the capacitor voltage to reach 200v.

For a series RC circuit with an uncharged capacitor (10 µF) and a resistor (470 kΩ), when a voltage (50 V) is applied, the voltage across the capacitor can be calculated using the charging equation:

Vc(t) = V * (1 - e^(-t/(R*C)))

Where Vc(t) is the capacitor voltage at time t, V is the applied voltage, R is the resistance, C is the capacitance, and e is the base of the natural logarithm (approximately 2.718).

To find the time it takes for the capacitor voltage to reach a certain percentage of the applied voltage, we can rearrange the equation for t:

t = -R * C * ln(1 - (Vc(t) / V))

Now, let's find the time it takes for the capacitor voltage to reach 90% of the applied voltage, which is 45 V (90% of 50 V):

t = -470,000 * 0.00001 * ln(1 - (45 / 50))
t ≈ 1.299 * 10^6 microseconds
t ≈ 1.299 seconds

So, it takes approximately 1.299 seconds for the capacitor voltage to reach 90% of the applied voltage in this RC circuit.

For more questions on capacitor:

https://brainly.com/question/27393410

#SPJ11

It takes approximately 1.33 seconds for the voltage across the uncharged 10 µF capacitor to reach 200V when connected in series with a 470-kΩ resistor and a 50V applied across the combination.

In this situation, we can use the equation:

V = Vmax(1 - e^(-t/RC))

Where V is the voltage across the capacitor at any given time, Vmax is the maximum voltage the capacitor can reach (in this case, 50V), t is the time, R is the resistance of the resistor (470 kΩ), and C is the capacitance of the capacitor (10 µF).

To find how long it takes for the capacitor voltage to reach 200V, we need to solve for t in the above equation when V = 200V:

200V = 50V(1 - e^(-t/(470kΩ*10µF)))

4 = 1 - e^(-t/(4.7s))

e^(-t/(4.7s)) = 0.75

-t/(4.7s) = ln(0.75)

t = -4.7s * ln(0.75)

t ≈ 1.33 seconds

To learn more about capacitor voltage : brainly.com/question/13592820

#SPJ11

The Doppler frequency of the 315 Hz sound is approximately 285 Hz.

To calculate the Doppler frequency, we can use the formula:

f' = f * (v + v_o) / (v + v_s)

where:

f' is the observed frequency,

f is the source frequency,

v is the speed of sound,

v_o is the velocity of the observer, and

v_s is the velocity of the source.

In this case, the source frequency (f) is 315 Hz, the speed of sound (v) is 345 m/s, the velocity of the observer (v_o) is 0 m/s (since the observer is stationary), and the velocity of the source (v_s) is 35.0 m/s (since the source is headed toward the observer).

Plugging these values into the formula, we have:

f' = 315 Hz * (345 m/s + 0 m/s) / (345 m/s + 35.0 m/s)

f' = 315 Hz * 345 m/s / 380 m/s

f' ≈ 285 Hz

Therefore, the Doppler frequency of the 315 Hz sound, when the source is headed toward the stationary observer at 35.0 m/s, is approximately 285 Hz.

Learn more about doppler frequency

brainly.com/question/14833267

#SPJ11

The air temperature at the nose of the aircraft where stagnation occurs is 125⁰C.

In order to calculate the air temperature at the nose of the aircraft where stagnation occurs, we need to use the concept of adiabatic compression.

As the aircraft moves through the air, the air is compressed due to the shape of the aircraft. This compression causes the temperature of the air to increase.

The amount of temperature increase is determined by the speed of the aircraft and the ratio of specific heats of the air.

Assuming a ratio of specific heats of 1.4, we can use the formula Tnose = Tstill + (v²/2Cp), where Tstill is the still air temperature (5⁰C), v is the velocity of the aircraft (400 m/s), and Cp is the specific heat at constant pressure (1005 J/kg.K).

Plugging in these values, we get Tnose = 125⁰C.

Learn more about stagnation at

https://brainly.com/question/30426154

#SPJ11

Coulomb's law can be applied to situations with more than two point charges by treating each pair of charges separately and then using vector addition to find the net force on a given charge.

To calculate the force on a charge q1 due to a group of other charges q2, q3, q4, and so on, the net force is found by adding the individual forces due to each charge.

The force on q1 due to q2 is given by Coulomb's law:

F12 = k(q1q2)/r12²

where

k is Coulomb's constant, and

r12 is the distance between q1 and q2.

Similarly, the force on q1 due to q3 is

F13 = k(q1q3)/r13²

and so on for each charge in the group.

Once the individual forces have been calculated, they are vectorially added together to find the net force on q1. This net force determines the motion of q1 in the electric field produced by the group of charges.

Overall, Coulomb's law allows us to predict the behavior of multiple charged particles and to understand how their interactions lead to the complex behavior of matter and energy in the physical world.

To know more about Coulomb's law refer here

brainly.com/question/506926#

#SPJ11

A single wave alone is unlikely to drown a ship in the ocean due to the ship's design, buoyancy, and stability features, as well as the relative size and power of typical ocean waves.

A single wave cannot drown a ship in the ocean due to various factors related to the nature of waves and the design of ships.

Firstly, waves in the open ocean typically have a crest followed by a trough, which means that they have a periodic nature. A ship is designed to withstand the impact of waves by having a hull that is buoyant and able to ride over the waves. The shape and size of ships are engineered to distribute and disperse the force exerted by waves, reducing the likelihood of capsizing or sinking.

Furthermore, ships are constructed with watertight compartments and systems designed to prevent flooding. They have bilge pumps and drainage systems in place to remove any water that enters the ship. These measures help maintain the ship's stability and prevent it from being overwhelmed by a single wave.

Lastly, the size and power of waves needed to overcome a ship's stability are generally only encountered in extreme weather conditions, such as during a severe storm or a tsunami. In such cases, it is not just a single wave that poses a threat, but a series of large and powerful waves that can potentially cause significant damage.

For such more questions on buoyancy

https://brainly.com/question/27504095

#SPJ11

At time t = t1, particle a is observed to be traveling with speed 2v0/3 to the left. Based on this information, it is possible to determine the speed and direction of motion of particle b. The behavior of the particles can be explained using the principles of conservation of momentum and energy.

Assuming that there is no external force acting on the particles, the total momentum of the system will be conserved. Thus, the momentum of particle a must be equal and opposite to the momentum of particle b. Since particle a is moving to the left, particle b must be moving to the right.

The exact speed of particle b cannot be determined with the given information. However, we do know that the magnitude of the momentum of particle b must be equal to the magnitude of the momentum of particle a. Therefore, if particle a has a mass of m and a velocity of 2v0/3 to the left, then particle b must have a mass of 2m and a velocity of 1v0/3 to the right.

In summary, at time t = t1, particle b must be traveling with a speed of 1v0/3 to the right in order to conserve momentum and energy in the system.

To know more about conservation of momentum click this link-

https://brainly.com/question/29220242

#SPJ11

The tension in the rope is 527.6 N. The work done by the rope on the skier is 15,700 J.

To determine the tension in the rope, we need to consider the forces acting on the skier. The skier is being pulled up the slope, so the tension in the rope must be equal to the component of the gravitational force acting down the slope. Using trigonometry, we can calculate the component of the weight parallel to the slope:

Component of weight = weight * sin(angle)

                  = 53 kg * 9.8 m/s^2 * sin(15°)

                  ≈ 138.7 N

Therefore, the tension in the rope is equal to the component of the weight and is approximately 138.7 N.

To calculate the work done by the rope, we use the formula:

Work = force * distance * cos(angle)

Here, the force is the tension in the rope, the distance is 125 m, and the angle is 15°. Plugging in the values:

Work = 138.7 N * 125 m * cos(15°)

    ≈ 15,700 J

Hence, the work done by the rope on the skier is approximately 15,700 Joules.

Learn more about Determine here:

https://brainly.com/question/30795016

#SPJ11

The two statements that describe a causal relationship between the mutation and skin cancer are important because they suggest that the mutation is a direct cause of the development of this type of cancer, rather than simply being related to it in a correlative way.

The first statement that describes a causal relationship between the mutation and skin cancer is that the mutation occurs in a gene that codes for a protein which regulates cell division. This means that the mutation directly affects the regulation of cell division, which can lead to the uncontrolled growth of skin cells and the development of cancer.The second statement that describes a causal relationship between the mutation and skin cancer is that scientists first noticed this mutation in people who are frequently exposed to ultraviolet radiation from the Sun or tanning beds. This suggests that the mutation is caused by the exposure to UV radiation and that this exposure is a direct cause of the development of skin cancer.By contrast, a correlational relationship would suggest that the mutation and skin cancer are related, but that one does not necessarily cause the other. For example, it could be that people who are more likely to develop skin cancer are also more likely to have this mutation, but that the mutation itself does not directly cause the cancer.
for more questions on mutation
https://brainly.com/question/29296485

#SPJ11

The cycle efficiency is 35.3%. The cycle efficiency of a simple ideal Rankine cycle can be calculated using the following formula:  η = (W_net / Q_in) * 100%

where η is the cycle efficiency, W_net is the net work output of the cycle, and Q_in is the heat input to the cycle.
To find the net work output of the cycle, we need to calculate the work done by the turbine and the work required by the pump. The work done by the turbine can be calculated using the following formula:
W_turbine = m * (h_1 - h_2)
where h_1 is the enthalpy of the fluid at the turbine inlet, and h_4 is the enthalpy of the fluid at the pump outlet.
Now, we can substitute the values given in the problem statement and solve for the cycle efficiency:
- The pressure limits of the cycle are 20 kPa and 3 MPa.
- The turbine inlet temperature is 500∘C.
- We can assume that the working fluid is water.
- We can use steam tables to find the enthalpies of the fluid at various points in the cycle.
Using steam tables, we can find that:
- h_1 = 3483.5 kJ/kg
- h_2 = 1841.7 kJ/kg
- h_3 = 203.9 kJ/kg
- h_4 = 950.8 kJ/kg
Assuming a mass flow rate of 1 kg/s, we can calculate the net work output of the cycle:
W_turbine = m * (h_1 - h_2) = 1 * (3483.5 - 1841.7) = 1641.8 kJ/s
W_pump = m * (h_4 - h_3) = 1 * (950.8 - 203.9) = 746.9 kJ/s
We can also calculate the heat input to the cycle:
Q_in = m * (h_1 - h_4) = 1 * (3483.5 - 950.8) = 2532.7 kJ/s
Finally, we can calculate the cycle efficiency:
η = (W_net / Q_in) * 100% = (894.9 / 2532.7) * 100% = 35.3%

To know more about efficiency visit :-

https://brainly.com/question/11752408

#SPJ11

The statement is True There are many materials that exhibit decreased resistance as temperature increases. This phenomenon is known as a negative temperature coefficient of resistance (NTC).

Other materials that show NTC behavior include conductive polymers, ceramics, and metals such as tungsten and molybdenum. In these materials, the decrease in resistance is typically due to an increase in the number of free electrons available for conduction as temperature increases.

However, it is important to note that not all materials exhibit NTC behavior. Some materials, such as copper and silver, have a positive temperature coefficient of resistance (PTC), meaning their resistance increases as temperature increases. The behavior of a particular material depends on its crystal structure, electronic band structure, and other factors.

To know more about resistance visit:-

https://brainly.com/question/30799966

#SPJ11

A unit train of coal consists of 110 carloads, with each carload carrying 100 tons of coal. The trainload of coal contains approximately 2.64 x 10¹⁴ J of energy and the power plant requires approximately 0.234 trainloads of coal per day to run at full capacity.

Part A:

The total weight of the coal in the train is:

110 carloads x 100 tons per carload = 11,000 tons

Since 25% of the weight of the coal is water, the weight of the coal itself is:

11,000 tons x (1 - 0.25) = 8,250 tons

The total energy contained in the coal is:

8,250 tons x 3.2 x 10¹⁰ J/ton = 2.64 x 10¹⁴ J

Therefore, the trainload of coal contains approximately 2.64 x 10¹⁴ J of energy.

Part B:

The power plant can produce electricity at a rate of:

978 MW = 978 x 10⁶ W

However, coal power plants are only 38% efficient in converting energy in coal to electricity. Therefore, the actual amount of energy produced by the power plant from a given amount of coal is:

0.38 x 3.2 x 10¹⁰ J/ton = 1.216 x 10¹⁰ J/ton

To produce 978 MW of electricity, the power plant needs:

978 x 10⁶ W / 1.216 x 10¹⁰ J/ton = 80.4 tons of coal per hour

Since each trainload carries 8,250 tons of coal, the power plant needs:

80.4 tons/hour x 24 hours/day / 8,250 tons per trainload = 0.234 trainloads per day

Therefore, the power plant needs approximately 0.234 trainloads of coal per day to keep running at full capacity.

To know more about the unit train refer here :

https://brainly.com/question/7992107#

#SPJ11

Light of wavelength 463 nm is incident on a diffraction grating that is 1.30 cm wide and has 1400 slits. The dispersion of the m=2 line is 988,172 rad/cm.

The dispersion of the m=2 line can be calculated using the formula

Dispersion = (mλ)/Δx

Where m is the order of the diffraction pattern, λ is the wavelength of light, and Δx is the spacing between adjacent slits on the diffraction grating.

In this case, m=2, λ=463 nm, Δx = 1.30 cm/1400 = 0.00093 cm.

Substituting these values into the formula, we get

Dispersion = (2)(463 nm)/(0.00093 cm)

= 988,172 rad/cm

Therefore, the dispersion of the m=2 line is 988,172 rad/cm.

To know more about dispersion here

https://brainly.com/question/17162191

#SPJ4

The required torque is 25386 N.m. to accelerate the merry-go-round.

To calculate the net torque required to accelerate the merry-go-round, we need to use the rotational equivalent of Newton's second law, which states that the net torque applied to an object is equal to its moment of inertia times its angular acceleration.

The moment of inertia of a uniform disk can be calculated as [tex]$I = \frac{1}{2}mr^2$[/tex], where [tex]$m$[/tex] is the mass of the disk and [tex]$r$[/tex] is its radius. Substituting the given values, we get

I = (31000kg)(7m)²/2 = 897250 kg.m²

The angular acceleration can be calculated by dividing the final angular velocity by the time taken for acceleration. Therefore,

[tex]\alpha = \frac{\omega_f - \omega_i}{t} = \frac{0.68 \text{ rad/s}}{24 \text{ s}} =[/tex] 0.0283 rad/s²

Now, we can use the rotational equivalent of Newton's second law to find the net torque required. The equation is [tex]$\tau = I\alpha$[/tex], where [tex]$\tau$[/tex] is the net torque. Substituting the values we get

[tex]$\tau[/tex] = (897250 kg.m²)(0.0283 rad/s²) = 25386 N.m

Therefore, the net torque required to accelerate the merry-go-round from rest to 0.68 rad/s in 24 s is 25386 N[tex]$\cdot$[/tex]m.

In conclusion, the net torque required to accelerate the uniform disk merry-go-round can be calculated by using the rotational equivalent of Newton's second law, which relates torque, moment of inertia, and angular acceleration. The moment of inertia of a uniform disk can be calculated as [tex]$\frac{1}{2}mr^2$[/tex].

In this case, the net torque required to accelerate the merry-go-round was found to be 25386 [tex]N$\cdot$m.[/tex]

To learn more about torque refer here:

https://brainly.com/question/25708791

#SPJ11

Massive stars, such as those with 10, 20, or 30 times the mass of the Sun, are relatively rare compared to stars like the Sun. The majority of stars in the universe are less massive than the Sun.

A significant number being low-mass red dwarf stars. Massive stars, on the other hand, are less common and represent a smaller fraction of the stellar population. Massive stars are more massive than the Sun and have different evolutionary paths. They have shorter lifespans and undergo dramatic supernova explosions at the end of their lives. The formation of massive stars is influenced by various factors, such as the initial conditions of star-forming regions and the interstellar medium's density and composition. While they are less common, massive stars play a crucial role in the universe, shaping their surroundings through intense stellar winds, radiation, and eventual supernova explosions, which contribute to the enrichment of the interstellar medium with heavy elements.

learn more about mass here:

https://brainly.com/question/11954533

#SPJ11

Hi! To calculate the wavelength of an AM radio station with a carrier frequency of 850 kHz, you can use the formula:

Wavelength (λ) = Speed of light (c) / Frequency (f)

The speed of light (c) is approximately 3 x 10^8 meters per second (m/s), and the frequency (f) is 850 kHz, which is equivalent to 850,000 Hz.

Wavelength (λ) = (3 x 10^8 m/s) / (850,000 Hz)

Wavelength (λ) ≈ 353 meters

So, the wavelength of the broadcast from the AM radio station with a carrier frequency of 850 kHz is approximately 353 meters.

learn more about frequency

https://brainly.in/question/39348621?referrer=searchResults

#SPJ11

The answer is 8 V.

Since the resistors are in series, the current passing through all of them is the same. Let's call this current "I".

Using Ohm's Law, we can find the voltage drop across each resistor:

V1 = IR1 = I(2.0 Ω) = 2I

V2 = IR2 = I(4.0 Ω) = 4I

V3 = IR3 = I(6.0 Ω) = 6I

The sum of the voltage drops across each resistor should equal the voltage provided by the emf device, which is 24 V.

V1 + V2 + V3 = 2I + 4I + 6I = 12I = 24 V

Solving for I, we get:

I = 24 V / 12 Ω = 2 A

Now we can find the voltage drop across the 4.0-Ω resistor:

V2 = IR2 = (2 A)(4.0 Ω) = 8 V

Therefore, the potential difference across the 4.0-Ω resistor is 8 V.

To know more about potential differences across resistors, refer here

https://brainly.com/question/31895190#

#SPJ11

The peak current, when the current lags EMF by 60 degrees in an RLC circuit with E₀=25 V and R= 50 ohms is 0.25 A.

In an RLC circuit, the current lags behind the EMF by an angle θ, where θ is given by the formula [tex]\theta = tan^{(-1)(XL - XC)} / R[/tex], where XL is the inductive reactance, XC is the capacitive reactance, and R is the resistance. Since the circuit is said to have a lagging power factor, it means that XL > XC, so the angle θ is positive.

Since the EMF (E₀) and resistance (R) are given, we can use Ohm's law to calculate the impedance Z of the circuit, which is given by Z = E₀ / I_peak, where I_peak is the peak current.

Since the circuit has a lagging power factor, we know that the reactance of the circuit is greater than the resistance, so we can use the formula XL = 2πfL and XC = 1/2πfC to calculate the values of XL and XC, where L is the inductance and C is the capacitance of the circuit.

Since the circuit has a lagging power factor, XL > XC, so we can calculate the value of θ using the formula [tex]\theta = tan^{(-1)(XL - XC)} / R[/tex]

Once we have calculated θ, we can use the formula Z = E₀ / I_peak to solve for the peak current I_peak.

Substituting the given values, we get:

R = 50 ohms

E₀ = 25 V

θ = 60 degrees

XL = 2πfL

XC = 1/2πfC

Using the given information, we can solve for XL and XC:

XL - XC = R tan(θ) = 50 tan(60) = 86.6 ohms

XL = XC + 86.6 ohms

Substituting these values into the equations for XL and XC, we get:

XL = 2πfL = XC + 86.6 ohms

1/2πfC = XC

Substituting the second equation into the first equation, we get:

2πfL = 1/2πfC + 86.6 ohms

Solving for f, we get:

f = 60 Hz

Substituting the values of R, XL, and XC into the equation for impedance, we get:

Z = sqrt(R² + (XL - XC)²) = sqrt(50² + (86.6)²) = 100 ohms

Substituting the values of E₀ and Z into the equation for peak current, we get:

I_peak = E₀ / Z = 25 / 100 = 0.25 A

To know more about peak current, refer here:

https://brainly.com/question/31857951#

#SPJ11

The speed of the spaceship as measured by the earth observer is 0.4c.

To determine the speed of the spaceship, we can use the time dilation formula:
Δt' = Δt/√(1-v²/c²)
where Δt is the time interval measured by the earth observer, Δt' is the time interval measured by an observer on the spaceship, v is the velocity of the spaceship, and c is the speed of light.
In this case, Δt' = 0.75 μs and the proper length of the spaceship, L, is 300 m.
Using the equation for proper length contraction, we can find L' = L/√(1-v²/c²)
Solving for v in both equations and equating them, we get:
v = (L/L') * c * √(1-((Δt/Δt')²))
Plugging in the values, we get v = 0.4c, where c is the speed of light. Therefore, the speed of the spaceship as measured by the earth observer is 0.4 times the speed of light.

Learn more about speed here:

https://brainly.com/question/13201309

#SPJ11

The wavelength of the wave is approximately 0.376 meters.

Wavelength can be defined as the distance between two successive crests or troughs of a wave. It is measured in the direction of the wave.

The speed of a sound wave is related to its wavelength and time period by the formula, λ = v × T where, v  is the speed of the wave, λ is the wavelength of the wave and T is the time period of the wave.

To find the wavelength of a wave with a speed of 75.0 m/s and a period of 5.03 ms, you can use the formula:

Wavelength = Speed × Period

First, convert the period from milliseconds to seconds:
5.03 ms = 0.00503 s

Now, plug in the given values into the formula:
Wavelength = (75.0 m/s) × (0.00503 s)

Multiply the values:
Wavelength ≈ 0.376 m

So, the wavelength of the wave is approximately 0.376 meters.

Learn more about "wavelength": https://brainly.com/question/10750459

#SPJ11

Therefore, the detector first detects electromagnetic radiation at time t ≈ 0.000506 seconds.  

We can use the equation F = ma to find the acceleration of the electron:

a = q(E + v x B)

a = qE + qvB

The velocity of the electron is v = d/dt (r/m) = d/dt (0/m) = 0. Therefore, the magnetic field component vB = 0.

The electric field component E is given by the equation E = -d/dt (a/m) = -q(d/dt (a/m)) = -qda/dt.

The acceleration a is constant, so d/dt (a/m) = d/dt (a) = qE. Therefore, the electric field component E is given by E = qa/m.

The direction of the electric field vector E is shown by the arrow "y" on the diagram. Therefore, the direction of propagation of the radiation is along the y-axis, perpendicular to the line connecting the origin to the point where the electric field vector reaches the detector.

We can now find the time at which the detector first detects electromagnetic radiation. The time at which the detector first detects electromagnetic radiation is given by the time at which the distance between the origin and the detector becomes equal to the radius of the circle that passes through the origin and the point where the electric field vector reaches the detector.

The distance between the origin and the detector is given by r = 9 cm, and the radius of the circle that passes through the origin and the point where the electric field vector reaches the detector is given by r = a/(qE). Therefore, the time at which the detector first detects electromagnetic radiation is given by:

t = 9 cm / (a/(qE))

We can now substitute the values of a, q, E, and μ0 for the given problem to find the time at which the detector first detects electromagnetic radiation:

t = 9 cm / (0.1 N / (1.602 x 10 Coulombs x 1.99 x 10 Amperes))

t ≈ 0.000506 seconds

Learn more about electromagnetic Visit: brainly.com/question/14953576

#SPJ4

The wavelength of light incident on a platinum target that will release electrons with a maximum speed of 1.63 x 10^6 m/s is approximately: 111 nm.

The wavelength of light that can release electrons with a maximum speed of 1.63 x 10^6 m/s from a platinum target can be calculated using the photoelectric effect equation:
E = hν - Φ
where E is the energy of the incident photon,
h is Planck's constant,
ν is the frequency of the incident radiation, and
Φ is the work function of the metal (the minimum energy required to release an electron from its surface).

The maximum kinetic energy of the released electrons is given by:
KEmax = 1/2mv^2
where m is the mass of the electron and
v is its velocity.

Since KEmax = E - Φ, we can rearrange the equation to find the energy of the incident photon:
E = KEmax + Φ

Substituting the given values:
KEmax = 1.63 x 10^6 J/mol
Φ (for platinum) = 6.35 eV = 1.02 x 10^-18 J
h = 6.626 x 10^-34 J s

E = (1.63 x 10^6 J/mol) + (1.02 x 10^-18 J) = 1.79 x 10^-18 J

Now we can solve for the frequency of the incident radiation:
E = hν
ν = E/h = (1.79 x 10^-18 J)/(6.626 x 10^-34 J s) = 2.7 x 10^15 Hz

Finally, we can convert frequency to wavelength using the equation:
c = λν
where c is the speed of light in a vacuum (3.00 x 10^8 m/s).
λ = c/ν = (3.00 x 10^8 m/s)/(2.7 x 10^15 Hz) = 111 nm (rounded to three significant figures).

To know more about "Photoelectric effect" refer here:

https://brainly.com/question/26465043#

#SPJ11