The value of ln(k) at 589 K for the reaction 4 NH₃(g) + 5 O₂ ⇌ 4 NO(g) + 6 H₂O(g) is -3.3.
B. The given information is δG⁰ = -56.5 kJ/mol and the reaction equation is 4 NH₃(g) + 5 O₂ ⇌ 4 NO(g) + 6 H₂O(g). The relation between δG⁰ and equilibrium constant K is given by the equation δG⁰ = -RTlnK, where R is the gas constant and T is the temperature in Kelvin. Thus, we can calculate ln(K) as follows:
ln(K) = -δG⁰/RT
= -(56.5 kJ/mol) / (8.314 J/K·mol × 589 K)
= -0.0033
≈ -3.3 (to one decimal place)
Therefore, the value of ln(K) at 589 K for the given reaction is -3.3.
For more questions like Reaction click the link below:
https://brainly.com/question/30086875
#SPJ11
? Question
The article mentions that the difference in the responses of men and women to the research study could be due to
confirmation bias. Use the Internet to look up "confirmation bias." Which of the following statements could support the
view that the difference is due to confirmation bias?
Select all the correct answers.
Many of the men may believe that they are fair and unbiased against women.
Many of the women may already believe that they face biases.
More men than women participated in the study.
The men who participated in the study were younger than the women.
Many of the men may believe that they are fair and unbiased against women.
Many of the women may already believe that they face biases.
What is confirmation bias ?
The propensity to seek for, understand, favor, and remember information that supports or confirms one's preexisting opinions or values is known as confirmation bias. People exhibit this bias when they choose facts that support their opinions while rejecting those that contradict them or when they interpret ambiguous facts as supporting their preexisting beliefs. Although confirmation bias cannot be completely avoided, it can be controlled, for instance, by critical thinking education and training.
Confirmation bias has been linked to poor decisions in the scientific, organizational, financial, and political spheres. These biases can preserve or reinforce views in the face of contradictory data and contribute to overconfidence in personal opinions.
Learn more about confirmation bias here:
https://brainly.com/question/7127535
#SPJ1
Answer:
Many of the men may believe that they are fair and unbiased against women.
Many of the women may already believe that they face biases.
Explanation:
A student started with 0.3295 g of copper. The mass of filter paper and copper (II) oxide product was found to be 0.5723 g, and that of the filter paper alone was 0.2568 g. Calculate the percent yield of copper (II) oxide.
The percent yield will be 95.75%
Percent yieldMass of copper = 0.3295 g
Mass of filter paper + copper (II) oxide = 0.5723
Mass of filter paper only = 0.2568
Mass of copper (II) oxide = 0.5723 - 0.2568 = 0.3155
Percent yield = yield/total x 100%
= 0.3155/0.3295 x 100% = 95.75%
More on percent yield can be found here: https://brainly.com/question/17042787
#SPJ1
a group of atoms of more than one elements forms
Considering the definition of chemical compounds, a group of atoms of more than one elements forms chemical compounds.
What is a chemical compoundChemical Compounds are substances that are made up of a minimum of 2 elements that have reacted with each other to give another substance different from the initial elements. Elements are held together by what is known as a chemical bond.
In other words, a chemical compound is any substance formed by the union of two or more types of chemical elements, that is, by atoms of two or more different types of chemical elements, joined together by chemical bonds in certain proportions.
A chemical compound can be separated into its constituent elements by chemical reactions.
SummaryIn summary, a group of atoms of more than one elements forms chemical compounds.
Learn more about a chemical compound:
https://brainly.com/question/26487468
https://brainly.com/question/26752851
#SPJ1
Calcium (Ca) and diatomic oxygen (O2) combine to form calcium oxide (CaO). The data table below compares the properties of these substances.
Calcium (Ca) Oxygen (O2) Calcium Oxide (CaO)
Melting Point (°C) 842 −218.4 2613
Density (g/cm3) 1.54 0.00143 3.34
Appearance silvery-white
metal colorless,
odorless gas white, odorless
powder
What can be concluded from this data?
A.
A chemical reaction occurred because calcium oxide has different properties than calcium and diatomic oxygen.
B.
A chemical reaction did not occur because solid calcium cannot chemically react with diatomic oxygen gas.
C.
A chemical reaction did occur because calcium oxide has similar properties to calcium and diatomic oxygen.
D.
A chemical reaction did not occur because calcium oxide is not a new substance.
A chemical reaction occurred because calcium oxide has different properties than calcium and diatomic oxygen. The correct option is A.
What are chemical reactions?A chemical reaction is said to occur when the chemical properties of substances change during the course of the reaction.
From the illustration, the chemical properties of calcium oxide are unique from that of calcium and oxygen. Thus, calcium oxide has become a new substance entirely.
Once a reaction leads to the formation of new substances, such a reaction is a chemical reaction.
More on chemical reactions can be found here: https://brainly.com/question/22817140
#SPJ1
Life alters the atmosphere by producing and removing _____________________, carbon dioxide, and methane.
Life alters the atmosphere by producing and removing oxygen, carbon dioxide, and methane.
Burning fossil fuels like coal, and natural gas, including oil, solid waste, trees, and other biological materials release carbon dioxide into the atmosphere, along with some chemical reactions.
It is thought that the first billion years of Earth's history saw a lot of volcanic activity. With little to no oxygen, the early atmosphere was presumably primarily composed of carbon dioxide.
Therefore, life alters the atmosphere by producing and removing oxygen, carbon dioxide, and methane.
To know more about atmosphere
https://brainly.com/question/26767532?
#SPJ4
state and appearance sodium chloride
Sodium chloride is white, crystalline solid at room temperature.
Sodium chlorideIt is a compound whose components atoms are sodium and chlorine.
The atoms of the two elements combine chemically through an ionic bond. The sodium donates it valence electron to the chlorine atom.
Thus, sodium chloride is an ionic compound. It has a characteristic white appearance and crystalline structure.
The compound is a solid at room temperature. It has a melting point of 801 °C.
More on sodium chloride can be found here: https://brainly.com/question/9811771
#SPJ1
Please help me!!!!!!!!!!!!!
1)The limiting reactant will be aluminum acetate
2) The mass of aluminum hydroxide formed will be 9.75 grams.
Stoichiometric problemThe equation of the reaction is as below:
[tex]Al(C_2H_3O_2)_3 + 3NaOH --- > 3C_2H_3NaO_2 + Al(OH)_3[/tex]
The mole ratio of the 2 reactants is 1:3.
Mole of 100 mL. 1.25 mol/L [tex]Al(C_2H_3O_2)_3[/tex] = 0.1 x 1.25 = 0.125 mol
Mole of 300 mL, 2.30 mol/L NaOH = 0.3 x 2.3 = 0.69 mol
Thus, aluminum acetate is limited.
Mole ratio of [tex]Al(C_2H_3O_2)_3[/tex] and [tex]Al(OH)_3[/tex] = 1:1
Equivalent mole of [tex]Al(OH)_3[/tex] = 0.125 mol
Mass of 0.125 mole [tex]Al(OH)_3[/tex] = 0.125 x 78 = 9.75 grams.
More on stoichiometric calculations can be found here: https://brainly.com/question/27287858
#SPJ1
A diprotic acid is titrated with a strong base. The pH at the first half-equivalence point is 3.27. The pH at the second half-equivalence point is 8.53. What is the value of ka2
A diprotic acid is titrated with a strong base. The pH at the first half-equivalence point is 3.27. The pH at the second half-equivalence point is 8.53. The value of ka2 is 27.89.
What is pH ?pH is used to measure whether the substance is acidic, basic or neutral and the range is 0-14. If the pH is less than 7 then the solution is acidic in nature. if the pH is more than 7 then the solution is basic in solution. If the pH is equal to 7 then the solution is neutral in nature.
How to find the polyprotic value ?To find the polyprotic value
[tex]K_{a_2}[/tex] = pH of first half equivalence point × pH of second half equivalence point
[tex]K_{a_2}[/tex] = 3.27 × 8.53
= 27.89
Thus from the above conclusion we can say that A diprotic acid is titrated with a strong base. The pH at the first half-equivalence point is 3.27. The pH at the second half-equivalence point is 8.53. The value of ka2 is 27.89.
Learn more about the pH here:
https://brainly.com/question/22390063
#SPJ4
Will give u brainliest!!!
part e
drop a single crystal of sodium acetate into the flask. observe the contents of the flask. what happens to the sodium acetate solution in the flask after you drop in the crystal?
Answer:
I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.
Explanation:
I used this and scored 100% but if you copy and paste they will flag you for plagiarsm so make sure to rewrite it in your own words.
I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.
What is Sodium acetate solution?Chemically known as CH3COONa, sodium acetate is a hygroscopic powder that is very water soluble. The addition of sodium acetate to products like heating pads, food, industries, and concrete is possible.
When administered intravenously, sodium acetate plays a critical role in medicine as an electrolyte replenisher. It is mostly recommended to treat hyponatremic patients' sodium levels. Additionally, it can be used to alkalinize urine and treat metabolic acidosis.
In patients with limited or no oral intake, salt should be added to high volumes of intravenous fluids to prevent or treat hyponatremia. for the patient's needs cannot be addressed by conventional electrolyte or nutrient solutions, it is also helpful as an addition for creating customized intravenous fluid formulas.
Therefore, I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.
To learn more about Sodium acetate, refer to the link:
https://brainly.com/question/12924347
#SPJ2
Hat product forms at the anode during the electrolysis of molten nabr?
a. Na+ (l) Na(l).
b. Br–(l).
c. Br^3–(I).
d. Br^2(g).
Reaction at anode
2 Br- (aq) -----> Br2 (g) + 2e-
The product formed at the anode is Br2 (g).
In chemistry and production, electrolysis is a technique that makes use of direct electric present-day (DC) to power an otherwise non-spontaneous chemical response.
Electrolysis is commercially crucial as a degree inside the separation of factors from clearly going on sources including ores the usage of an electrolytic cell.
The voltage that is wanted for electrolysis to occur is called the decomposition capacity. The word "lysis" way to split or break, so in phrases, electrolysis would imply "breakdown via power".
Learn more about electrolysis here: https://brainly.com/question/25712870
#SPJ4
Which of the following measurements
have four significant figures? Select all
that apply.
1.001
120.0
Explanation:Significant figures are used in science to determine the precision of a number. Depending on the decimal point, sig figs are counted in different ways.
Decimal Points
When counting sig figs, you always start at the first non-zero number. However, sometimes you start from the left, other times the right.
If the decimal point is present, start counting sig figs from the left.If the decimal point is absent, start counting sig figs from the right.Remember to start counting at the first non-zero number.
For people in the Americas, there is a trick to remembering this.
If this decimal is Present, start from the Pacific. If it is Absent, start from the Atlantic.This works because the Pacific ocean is to the left of the Americas, and the Atlantic is to the right.
4 Significant Figures
The number 1.001, has 4 significant figures. Since there is a decimal point, we start counting from the left. The first digit is not zero, so we count all four places as significant.
The number 120.0 also has 4 sig figs. Like the number above, we start counting from the left because of the decimal. The first digit on the left is not zero, so we once again count all 4 digits as significant.
Blood alcohol concentration (bac) is defined as the ration of alcohol in the system to?
Blood Alcohol Concentration (BAC) is defined as the ratio of alcohol in the system to Blood in the system.
Blood/Breath Alcohol concentration (BAC) is the quantity of alcohol within the bloodstream or on one's breath. BAC is expressed because of the weight of ethanol, in grams, in 100 milliliters of blood, or 210 liters of breath. BAC can be measured with the aid of breath, blood, or urine exams.
Blood alcohol content material shows the percentage of alcohol that is in a person's bloodstream. BAC is crucial to prosecutors because they accept it as true with it displays how tons an individual is impaired via alcohol.
Human beings making their own alcoholic beverages regularly calculate the percentage of alcohol by way of extent by way of measuring their relative density with a hydrometer or their sugar content material with a refractometer.
Learn more about alcohol here: https://brainly.com/question/24129981
#SPJ4
Which answer best describes what is happening in the following reaction?
2C8H18 + 25O2 Right arrow. 16CO2 + 18H2O
This is not a redox reaction. It is an example of combustion.
This is a redox reaction in which octane (C8H18) is the reducing agent.
This is a redox reaction in which carbon dioxide (CO2) burns due to ignition.
This is not a redox reaction, because a solution of carbon dioxide and water results.
The statement that best describes what is happening in the following reaction is this is not a redox reaction, It is an example of combustion (option A).
What is a combustion reaction?A combustion reaction is a reaction wherein a substance is combined with oxygen, usually at high temperature, releasing heat.
According to this question, octane undergoes a combustion reaction to produce carbon dioxide and water as follows: 2C8H18 + 25O2 = 16CO2 + 18H2O
Therefore, the statement that best describes what is happening in the following reaction is this is not a redox reaction, It is an example of combustion.
Learn more about combustion at: https://brainly.com/question/12172040
#SPJ1
Answer:
A: This is not a redox reaction. It is an example of combustion.
Explanation:
A certain mass of nitrogen gas occupies a volume of 8.56 L at a pressure of 3.72 atm. At what pressure will the volume of this sample be 10.94 L
The final pressure of the nitrogen gas with the increase in volume is 2.91 atm.
What is Boyle's Law?Boyle’s law is a gas law that states that the pressure exerted by a gas (of a given mass, kept at a constant temperature) is inversely proportional to the volume occupied by it.
The relation can be given as:
[tex]P_1V_1=P_2V_2[/tex]
The initial pressure of the gas, [tex]P_1[/tex] = 3.72 atm
The initial volume of the gas, [tex]V_1[/tex] = 8.56L
The final volume of the gas, [tex]V_2[/tex] = 10.94 L
Substituting the values, the final pressure [tex]P_2[/tex] is given as:
3.72 × 8.56 = [tex]P_2[/tex] × 10.94
[tex]P_2 =\frac{3.72 * 8.56}{10.94} \\\\P_2 =2.91 atm[/tex]
Therefore, the final pressure of the nitrogen gas with the increase in volume is 2.91 atm.
Learn more about pressure here:
https://brainly.com/question/25736513
#SPJ4
When 30.0 g of carbon is heated with silicon dioxide, 28.2 g of carbon monoxide is produced. What is the percent yield of carbon monoxide for this reaction? SiO₂(s) + 3C(s) SiC(s) + 2CO(g)
Answer: 60.5%
Explanation:
When 30.0 g of carbon is heated with silicon dioxide, 28.2 g of carbon monoxide is produced. 60.5% is the percent yield of carbon monoxide for this reaction.
The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield times by 100% divided by the experimental yield. The percent yield equals 100% if the theoretical and actual yields are equal.
SiO₂(s) + 3C(s)→ SiC(s) + 2CO(g)
moles of carbon =30.0 / 12=2.5moles
3 moles of carbon give 1 moles of SiC
1 mole of carbon will give 1/3 moles of SiC
2.5 mole of carbon will give (1/3)×2.5 =0.83 moles of SiC
mass of SiC = 0.83× 40.09=33.27
percent yield = (actual yield/theoretical yield) x 100%
percent yield= (28.2 / 33.27)x 100%
percent yield = 60.5%
To know more about percent yield, here:
https://brainly.com/question/17042787
#SPJ2
The following reversible reaction is at equilibrium. If the concentration of HCI is increased, how would
the system react?
NH4CI NH3 + HCI
A. Nothing would change.
B. The reaction would move to the right, producing more NH3.
C. The reaction would move to the left, producing more NH4CI.
D. There would only be HCI remaining.
Answer:
C.) The reaction would move to the left, producing more NH₄CI.
Explanation:
The chemical equation:
NH₄Cl ↔ NH₃ + HCl
If you were to increase the amount of HCl, the equilibrium would shift to the left. This is because the system is trying to go back to equilibrium. The equilibrium was disturbed when more product (HCl) was added. In order to restore equilibrium, you need to do the same thing that was done to the products to the reactants. In other words, since the products increased, the reactants need to increase.
Which answer best describes what is happening in the following reaction?
2C8H18 + 25O2 Right arrow. 16CO2 + 18H2O
This is not a redox reaction. It is an example of combustion.
This is a redox reaction in which octane (C8H18) is the reducing agent.
This is a redox reaction in which carbon dioxide (CO2) burns due to ignition.
This is not a redox reaction, because a solution of carbon dioxide and water results.
A. This is not a redox reaction. It is an example of combustion.
Combustion reaction of hydrocarbonDuring the combustion of a hydrocarbon, the hydrocarbon reacts with oxygen to create carbon dioxide, water, and heat.
Example of combustion reaction2C8H18 + 25O2 → 16CO2 + 18H2O
Thus, we can conclude that, this is not a redox reaction. It is an example of combustion.
Learn more about combustion here: https://brainly.com/question/9425444
#SPJ1
Answer:
A: This is not a redox reaction. It is an example of combustion.
Explanation:
What happens to iron in a bolt as the bolt rusts?
Answer:
write the following as fractions in their simplest form
which of these attacking reagent is an electrophile 1:HNO3 2:Nh3 3:Br- 4: H+
The attacking reagent which is an electrophile is H+; option D.
What are electrophiles?Electrophiles are electron-loving reagents which attack and attach to electron-rich reagents.
Electrophiles usually are positively charged reagents.
Therefore, the attacking reagent which is an electrophile is H+.
In conclusion, electrophiles are electron-loving reagents.
Learn more about electrophiles at: https://brainly.com/question/5139016
#SPJ1
About how long does it take for the reaction to reach equilibrium in this concentration versus time graph?
a graph of reactant and product concentration vs. time; a red curve shows the reactant concentration decreasing while two blue curves show the product concentration increasing with time; both blue curves intersect the red curve; the chemical equation is water reacting to produce hydrogen and oxygen
A.
0.5 second
B.
1.5 seconds
C.
2.5 seconds
D.
4.5 seconds
The time taken for the reaction to reach equilibrium in this concentration versus time graph is 4.5 seconds and is denoted as option D.
What is Time?This refers to the duration in which a certain action or activity takes place with its unit being seconds.
From the graph we can deduce that:
The two blue lines, the concentrations of H₂ and O₂, become flat between 4 and 5 seconds.The red line, the concentration of H₂O, becomes flat, also, between 4 and 5 seconds.This therefore means that the time taken for the reaction to reach equilibrium in this concentration versus time graph is 4.5 seconds.
Read more about Concentration versus time graph here https://brainly.com/question/14903305
#SPJ1
Answer: 4.5 is right just took the test.
Explanation:
Assume that helium behaves as an ideal gas. what is the estimated density of 1.0 g of helium gas at a temperature of 27 °c and a pressure of 3.0 atm? (note: use r = 0.0821 l∙atm∙mol−1∙k−1)
The density of the helium gas is 0.487 g/L
Calculation,
According to Ideal gas equation,
PV = nRT ...(I)
The values of some terms are given as,
P is the pressure = 3 atm
V is the volume = ?
T is the temperature = 27°C = 27°C + 273 = 300 K
R is the universal gas constant = 0.0821 L∙atm∙mol−1∙K−1
n is the number of moles of helium = given mass of helium/molar mass of helium
n is the number of moles of helium = 1 g/ 4 g/mole = 0.25 mole
So, by putting the value of all data given in the equation (i) we get,
3 atm × V = 0.25 mol ×0.0821 L∙atm∙mol−1∙K−1×300 K
V = 0.25 mol ×0.0821 L∙atm∙mol−1∙K−1×300 K/3 atm
V = 2.05 L
The formula of density = given mass /volume = 1g/2.05 L = 0.487 g/L
learn about density
https://brainly.com/question/15164682
#SPJ4
The solubility of pbso₄ in water at 25 °c is 7. 9 × 10⁻⁴ m. What is ksp for pbso₄?.
ksp = 2S²
= 2 [ 7.9* 10-⁴ moldm-³ ]²
= 124.82 * 10-⁸ mol² dm-⁶
The term Ksp denotes the solubility product. It is generally used to predict the precipitation of reactions. The Ksp of PbSO₄ is 6.24 × 10⁻⁷.
What is solubility product?The solubility product of a sparingly soluble salt is defined as the product of the molar concentrations of its ions in a saturated solution of it at a given temperature. By knowing the solubility product of a substance, it is possible to predict whether a substance precipitate out or not.
In short, the precipitation of an ionic substance from the solution occurs when the ionic product exceeds the value of its solubility product at that temperature.
Here PbSO₄ dissociates as:
PbSO₄ → Pb²⁺ (aq) + SO₄²⁻ (aq)
Ksp = [Pb²⁺] [SO₄²⁻ ]
= [7. 9 × 10⁻⁴] [7. 9 × 10⁻⁴]
= 6.24 × 10⁻⁷
Thus the value of Ksp is 6.24 × 10⁻⁷.
To know more about solubility product, visit;
https://brainly.com/question/4577985
#SPJ2
Consider the following equation in chemical equilibrium. C2H4(g) H2(g) C2H6(g) 137 kJ What happens to the amount of ethane (C2H6) when the temperature of the system is increased
The amount of ethane decreases
increasing the temperature (adding energy), will drive the reaction to the left
What happens to the amount of ethane (C2H6) when the temperature of the system is increased ?C2H4(g) <--> C2H6(g) + 137 kJ
because this reaction is an exothermic reaction and the heat is a product of this reaction, So when the number of temperature increases
so (more heat will be added) so the reaction will go leftward (toward reactants ) so the amount of C2H4 & H2 will increase and the amount of ethane C2H6 will decrease.Learn more about Chemical Equilibrium here:
https://brainly.com/question/20884317
#SPJ4
Listed following are some distinguishing characteristics of comets, meteors, and asteroids. Match these to the appropriate category of objects.
The distinguishing characteristics of comets, meteors, and asteroids are its composition.
What are the characteristics of comets, meteors and asteroids?Asteroids are the fragments of rock that were left over from the creation of the solar system, Meteors are the rocks that enter the atmosphere of the Earth from space while on the other hand, Comets are the remnants of the formation of the solar system that are made of dust, rocks, and ice. All these materials i.e. comets, meteors and asteroids are different from one another due to its structure and chemical composition.
So we can conclude that the distinguishing characteristics of comets, meteors, and asteroids are its composition.
Learn more about asteroids here: https://brainly.com/question/11996385
#SPJ1
A molecule that contains delocalized electrons ________
Answer:
benzene molecule
Explanation:
The molecules exhibiting delocalization of electrons will have at least two resonance structures. These two resonance structure are having the equal energy.
What is resonance?Resonance is an electronic property of molecules by which, the sigma bond or pi bond moves from one location to other forming different mesomeric structures of the compound.
For example carbon dioxide can have two resonance structures.The lone pair in oxygen delocalize from one oxygen to the other. The double bond with carbon can be of either side of carbon. Thus one negative charge forms for one oxygen. This charge can be on the second hydrogen too.
In this way free electrons can delocalise through the orbitals and this process make the molecule more stable. The resonance structures together form the canonical structure which is the most probable and stable form of the compound.
To find more about resonance, refer the link below:
https://brainly.com/question/23287285
#SPJ5
how do protons determine the identity of an atom
Explanation:
Proton is one of the subatomic particles which has a positive charge. The number of protons present will give the atomic number of the chemical element. Every element will have a unique atomic number. Thus, we can say that protons will determine the identity of an element.
Two trains, A and B are moving at a speed of 20 km per hour
and 30 km per hour respectively. Which type of energy do
these two trains have?
Answer:
[tex]\fbox {kinetic motion}[/tex]
Explanation:
As the trains are clearly in motion, we can understand the these trains possess kinetic energy, which is by virtue of a motion of a body.
Answer:
type of energy that two train have are kinetic energy
Vinegar contains carbon, hydrogen, and oxygen with percent masses of 40.01% C, 6.70% H, and 53.29% O, respectively. Determine the empirical and molecular formulas of the compound. The molar mass of vinegar is about 60 g/mol. HOW DO WE GET THERE
The empirical formula is = C2H4O2
Molecular formula=C2H4O2
Calculation of Molecular formula and empirical formula:-Vinegar has three elements:
oxygen = 53.29%,
hydrogen = 6.70%,
and carbon = 40.01%.
We can create an equation for the total mass of vinegar with 'a' carbon atom,' b' hydrogen atom, and 'c' oxygen atoms using the molar masses of C, H, and O.
12*a + 1*b + 16*c = 60
We also know that C makes up 24 g/mol, or 40.01 percent, of the overall mass of 60 g/mol.
The formula contains two C atoms because each C atom has a molecular mass of 12 g/mol. You may determine that the formula contains 4 H and 2 O atoms by using the same reasoning for H and O.
The empirical formula is = C2H4O2
Molecular formula= (C2H4O2)n
(4 x 12 + 1 x 4 + 16 x 2)n = 60
(84)n = 60
n=60/84
n=0.71=1
Molecular formula=C2H4O2
Learn more about Molecular and empirical formulas here:-
https://brainly.com/question/9207476
#SPJ4
EXPERIMENT 1: How do you expect your coarse titration volume at the color change to compare to your fine titration volumes?
In the endpoint when the indicator changes color it gives the information that the acid is neutralized by the base.
What is Titration ?Titration is also known as titrimetry is a technique where a solution of known concentration is used to calculate the concentration of the unknown solution. Titration is a laboratory technique.
What is Endpoint ?The point at which the indicator changes the color is known as Endpoint.
Thus from the above conclusion we can say that In the endpoint when the indicator changes color it gives the information that the acid is neutralized by the base.
Learn more about the Titration here: https://brainly.com/question/186765
#SPJ1
By replacing hardware safety features with software controls in the therac-25 machine, aecl was able to?
Therac-25, AECL was able to reduce costs by replacing hardware safety features with software controls.
the Therac-25 was a laptop-controlled radiation therapy machine produced by Atomic energy state Canada limited in 1982 after the Therac-6 and Therac-20 units. It was involved in at least six accidents between 1985 and 1987, in which patients were given massive overdoses state radiation.
The Therac-25 machine was a state-of-the-art linear accelerator developed by using the company Atomic strength Canada restricted (AECL) and a French company CGR to provide radiation treatment to cancer sufferers. The Therac-25 become the most computerized and complicated radiation therapy device state its time.
learn more about cancer here https://brainly.com/question/11710623
#SPJ4