Molecule C is trisubstituted and molecule D is disubstituted.
How do you classify alkenes based on the number of substituents, and why is 1,2,2-trimethylpropene considered trisubstituted while 3-ethyl-1-butene is disubstituted?The classification of alkenes as monosubstituted, disubstituted, trisubstituted, or tetrasubstituted is based on the number of substituents (groups of atoms) attached to each of the carbon atoms in the double bond.
- Monosubstituted alkenes have one substituent attached to each of the carbon atoms in the double bond.
- Disubstituted alkenes have two substituents attached to one of the carbon atoms in the double bond and one substituent attached to the other carbon atom.
- Trisubstituted alkenes have three substituents attached to one of the carbon atoms in the double bond and two substituents attached to the other carbon atom.
- Tetrasubstituted alkenes have four substituents attached to each of the carbon atoms in the double bond.
Molecule C, 1,2,2-trimethylpropene, has three substituents attached to one of the carbon atoms in the double bond (two methyl groups and one tertiary butyl group) and one substituent attached to the other carbon atom (a hydrogen atom). Therefore, it is a trisubstituted alkene.
Molecule D, 3-ethyl-1-butene, has two substituents attached to one of the carbon atoms in the double bond (an ethyl group and a hydrogen atom) and two substituents attached to the other carbon atom (a methyl group and a hydrogen atom). Therefore, it is a disubstituted alkene.
The reason why molecule C is trisubstituted and not disubstituted is that the presence of a tertiary butyl group as a substituent increases the bulkiness of the molecule and decreases the degree of unsaturation of the double bond.
In other words, the tertiary butyl group occupies more space around the double bond and reduces the number of available positions for additional substituents.
Therefore, even though there are only two substituents directly attached to the carbon atom on one side of the double bond, the presence of the tertiary butyl group makes it a trisubstituted alkene.
Learn more about Molecule
brainly.com/question/19922822
#SPJ11
Arrange the compounds in order of decreasing magnitude of lattice energy:a. LiBr
b. KI
c. CaO.
The lattice energy is the energy released when 1 mole of a solid ionic compound is formed from its ions in the gas state. The magnitude of lattice energy depends on the charges of the ions and their sizes.
The correct order of decreasing magnitude of lattice energy is: c. CaO > b. KI > a. LiBr
CaO has the highest lattice energy because Ca2+ and O2- ions have the highest charges (2+ and 2-) and smallest sizes, which results in strong electrostatic attraction between them.
KI has the second-highest lattice energy because K+ and I- ions have higher charges than Li+ and Br-, and their sizes are larger than Ca2+ and O2-. However, the attraction between K+ and I- ions is stronger than Li+ and Br- ions due to their higher charges.
LiBr has the lowest lattice energy because Li+ and Br- ions have the smallest charges and larger sizes than Ca2+ and O2- or K+ and I- ions. The electrostatic attraction between them is the weakest among the three compounds. The compounds arranged in order of decreasing magnitude of lattice energy are CaO > LiBr > KI.
To Know more about ionic compound visit:-
brainly.com/question/14982375
#SPJ11
Use the model to answer the question.
Examine the model.
(x Х
1. 1.
Х
х
Х
1. 1.
X
How does the process inside the box on the model influence the genes of an offspring?
The process creates new genes, which increases the genetic variation in the offspring.
The process exchanges genes, which results in genetic variation in the offspring.
The process duplicates chromosomes, which results in more genetic information in the offspring
The process removes chromosomes, which results in less genetic information in the offspring
The process inside the box on the model that influences the genes of an offspring is not clearly defined or described.
Without specific information about the process, it is difficult to determine its impact on the genes of an offspring. The options provided in the question are speculative and do not align with known biological processes. To accurately understand how a process influences the genes of an offspring, it is necessary to provide more details about the specific process in question. Genetic variation in offspring can arise through various mechanisms, including genetic recombination, mutation, and meiosis. Each process has distinct effects on the genetic information passed on to offspring.
Learn more about influences here
https://brainly.com/question/30364017
#SPJ11
the normal concentration range for cl−cl− ion is 95-105 meq/lmeq/l of blood plasma. so, a concentration of 150 meq/lmeq/l is
A normal concentration range for chloride (Cl⁻) ion in blood plasma is 95-105 meq/L. Therefore, a concentration of 150 meq/L is significantly higher than the normal range and may indicate a medical condition requiring further investigation.
A concentration of 150 meq/lmeq/l for the Cl- ion is higher than the normal range of 95-105 meq/lmeq/l in blood plasma. This can indicate various health conditions such as dehydration, kidney disease, or acid-base imbalances. It is important to consult a healthcare provider to identify the underlying cause and receive appropriate treatment. In some cases, medications or dietary adjustments may be necessary to regulate Cl- ion levels and maintain overall health.
To know more about concentration click here:
https://brainly.com/question/10725862
#SPJ11
Balance the following equations using the half-reaction method. Identify what is being oxidized and what is being reduced in each reaction: 1) M.O.' + a MAC (acidic solution
The balanced equation is: M.O.' + a MAC → b M.AC + [tex]cH_2O[/tex]. M.O.' is being reduced, and a MAC is being oxidized.
What are the balanced coefficients and oxidized/reduced species?In the given equation, M.O.' and a MAC react in an acidic solution to form b M.AC and [tex]c H_2O[/tex]. To balance the equation, we need to equalize the number of atoms on both sides and ensure that the charges are balanced.
To balance the equation using the half-reaction method, we start by identifying the oxidized and reduced species. The species that loses electrons is oxidized, while the species that gains electrons is reduced. In this case, M.O.' is being reduced because it is gaining electrons, and a MAC is being oxidized as it loses electrons.
Next, we balance the equation by separating the oxidation and reduction half-reactions. We balance the atoms, first considering those involved in the redox process. Then, we balance the charges by adding electrons to the side that needs them.
After balancing the atoms and charges, we can combine the half-reactions to obtain the balanced overall equation. The coefficients a, b, and c in the equation represent the stoichiometric coefficients needed to balance the number of molecules or ions involved in the reaction.
Learn more about half-reaction method
brainly.com/question/30816004
#SPJ11
how many rings are present in c18h29bro3? this compound consumes 2 mol of h2 on catalytic hydrogenation. enter your answer in the provided box.
In the compound C18H29BrO3, there are 7 rings present. However, we don't have enough information about the connectivity of the atoms in the molecule. Therefore, it is not possible to give a detailed answer to this question without additional information.
Regarding the second part of the question, catalytic hydrogenation of c18h29bro3 consumes 2 mol of h2, which means that each molecule of the compound reacts with two molecules of hydrogen gas. This information can be used to calculate the stoichiometry of the reaction and the amount of product formed under specific conditions.
When the compound consumes 2 moles of H2 during catalytic hydrogenation, it means that two double bonds or other unsaturated bonds are present. The general formula for an acyclic alkane is CnH(2n+2). Since this compound has 18 carbons, the number of hydrogens in a saturated alkane would be 2(18) + 2 = 38.
Now, let's compare the actual number of hydrogens in the given compound with the expected number for a saturated alkane. The compound has 29 hydrogens, which is 9 less than the expected number (38 - 29 = 9).
Considering that it consumed 2 moles of H2, we can infer that there are 2 double bonds or other unsaturated bonds (each consuming 1 mole of H2) in the compound. This means there are 7 remaining unsaturations that can be attributed to rings. So, in the compound C18H29BrO3, there are 7 rings present.
Learn more about hydrogen bonds
https://brainly.com/question/31018544
#SPJ11
Be sure to answer all parts. Complete the reactions to show how ethyl alcohol could be used to prepare CH3CN Ethyl alcohol o o NaCN [iji SOCI2; [2] NHz P4010 Na2Cr2O7, H2O H2SO4, heat PBrz or HBr Rxn Product O P4010 NaCN PBrz or HBO [1]1 SOCI2; [2] NH3 O O Na2Cr2O7, H20 H2S04, heat o This step is not necessary Rxn Product o P4010 O [1]1 SOC); [2] NH, NaCN Na2Cr2O7, H20 H2SO4, heat o This step is not necessary 0 PBrz or HBT Rxn Product o O [1]1 SOCI2; [2] NH3 P4010 This step is not necessary 0 PBrz or HBr NaCN Na2Cr2O7, H20 H2SO4, heat Rxn Product o O [1]1 SOCI2; [2] NH3 P4010 This step is not necessary PBrz or HBr NaCN Na2Cr2O7, H20 H2SO4, heat CH,CN
To prepare CH3CN (acetonitrile) from ethyl alcohol (CH3CH2OH), follow these steps:
1. First, oxidize ethyl alcohol to acetaldehyde using Na2Cr2O7, H2O, and H2SO4 under heat: CH3CH2OH + Na2Cr2O7 + H2SO4 (heat) → CH3CHO + byproducts
2. Next, convert acetaldehyde to ethyl bromide by reacting it with PBr3 or HBr: CH3CHO + PBr3 (or HBr) → CH3CH2Br + byproducts
3. After that, replace the bromine atom with a cyanide group using NaCN: CH3CH2Br + NaCN → CH3CH2CN + NaBr
4. Finally, eliminate ethylene using P4O10: CH3CH2CN + P4O10 → CH3CN + byproducts The overall reaction sequence can be summarized as: Ethyl alcohol → Acetaldehyde → Ethyl bromide → Ethyl cyanide → Acetonitrile
What is ethyl alcohol ?Ethyl Alcohol or Ethanol are liquid, clear and colorless goods, constituting an organic compound with the chemical formula C2H5OH, which is obtained both by fermentation and/or distillation as well as by chemical synthesis.
Learn more about ethyl alcohol at https://brainly.com/question/13560700
#SPJ11
according to the ipcc, one molecule of methane (ch4) is 86 times more potent as a greenhouse gas than a molecule of carbon dioxide (co2). what does it mean to say that methane is a greenhouse gas?
To say that methane (CH4) is a greenhouse gas means that it has the ability to trap heat in the Earth's atmosphere, contributing to the greenhouse effect. The greenhouse effect is a natural process that helps to maintain the Earth's temperature and make it suitable for life. However, the increased concentration of certain greenhouse gases, including methane, can enhance this effect and lead to global warming.
Methane is particularly potent as a greenhouse gas because it has a higher heat-trapping capacity per molecule compared to carbon dioxide (CO2). The statement that one molecule of methane is 86 times more potent than a molecule of carbon dioxide means that methane has a significantly greater ability to absorb and re-emit infrared radiation, which leads to a stronger warming effect.
The impact of methane on global warming is influenced by both its potency and its concentration in the atmosphere. While methane is present in lower concentrations compared to carbon dioxide, its high potency makes it an important target for climate change mitigation efforts.
Learn more about greenhouse gases and their role in climate change
https://brainly.com/question/14131369?referrer=searchResults
#SPJ11.
calculate ecell at 25°c when [ag (aq)] = 2.9 m and [al3 (aq)] = 0.041 m. calculate δgo, the standard free energy change for this reaction.
The standard free energy change for this reaction is -144.47 kJ/mol, which indicates that the reaction is spontaneous (since ΔG° is negative).
The reaction's balanced chemical equation is:
[tex]2Al(s) + 3Ag+(aq) → 3Ag(s) + 2Al3+(aq)[/tex]
The Nernst equation can be used to compute the cell potential (Ecell):
[tex]Ecell = E°cell - (RT/nF) * ln(Q)[/tex]
where E°cell is the standard cell potential, R is the gas constant (8.314 J/K·mol), T is the temperature in Kelvin (25°C = 298 K), n is the number of moles of electrons transferred
The standard electrode potentials are listed in tables, and for this reaction, we have:
Ag+(aq) + e- → Ag(s) E°red = 0.80 V (cathode)
Al3+(aq) + 3e- → Al(s) E°red = -1.67 V (anode)
Therefore, the standard cell potential is:
E°cell = E°red(cathode) - E°red(anode)
E°cell = 0.80 V - (-1.67 V)
E°cell = 2.47 V
Substituting these values into the Nernst equation, we get:
Ecell = E°cell - (RT/nF) * ln(Q)
Ecell = 2.47 V - (8.314 J/K·mol * 298 K / (6 * 96,485 C/mol)) * ln(1.58 x 10^6)
Ecell = 2.47 V - 0.050 V
Ecell = 2.42 V
Therefore, the cell potential at 25°C is 2.42 V.
The standard free energy change (ΔG°) for the reaction can be calculated using the equation:
ΔG° = -nF E°cell
Substituting the values of n, F, and E°cell into this equation, we get:
ΔG° = -6 * 96,485 C/mol * 2.47 V
ΔG° = -144.47 kJ/mol
For such more question on reaction:
https://brainly.com/question/11231920
#SPJ11
The cell potential for the given reaction is 1.10 V at 25°C, and the standard free energy change is -317.6 kJ/mol. The balanced equation is [tex]3 Ag⁺(aq) + Al(s) → 3 Ag(s) + Al³⁺(aq)[/tex].
The balanced equation for the given reaction is:
[tex]3 Ag⁺(aq) + Al(s) → 3 Ag(s) + Al³⁺(aq)[/tex]
The standard reduction potential for [tex]Ag⁺/Ag is +0.80 V and for Al³⁺/Al[/tex] is -1.66 V. The cell potential can be calculated using the Nernst equation:
[tex]Ecell = E°cell - (0.0592 V/n) log Q[/tex]
where E°cell is the standard cell potential, n is the number of moles of electrons transferred, and Q is the reaction quotient.
At 25°C, the Nernst equation becomes:
[tex]Ecell = E°cell - (0.0592 V/3) log ( [Ag⁺]³ / [Al³⁺] )[/tex]
[tex]Ecell = (+0.80 V) - (0.0197 V) log ( 2.9³ / 0.041 )[/tex]
Ecell = 1.10 V
The standard free energy change can be calculated using the formula:
[tex]ΔG° = -nFE°cell[/tex]
where F is the Faraday constant (96,485 C/mol), n is the number of moles of electrons transferred, and E°cell is the standard cell potential.
In this case, n = 3, so:
[tex]ΔG° = -(3 mol e⁻) × (96,485 C/mol) × (+1.10 V)[/tex]
ΔG° = -317,595 J/mol
ΔG° = -317.6 kJ/mol
Therefore, the cell potential at 25°C is 1.10 V, and the standard free energy change for the reaction is -317.6 kJ/mol.
learn more about cell potential here:
https://brainly.com/question/1313684
#SPJ11
using any data you can find in the aleks data resource, calculate the equilibrium constant K at 25° C for the following reaction. N2 + O2 ---> 2NO
Round your answer to 2 signiicant digits.
The equilibrium constant (K) for the given reaction, N2 + O2 ⇌ 2NO, at 25°C.
To calculate the equilibrium constant, K, you need to know the concentrations (or partial pressures) of the reactants and products at equilibrium. The equilibrium constant expression for the reaction is written as:
K = [NO]^2 / ([N2] * [O2])
To determine the equilibrium constant, you would need experimental data, such as the concentrations or partial pressures of N2, O2, and NO at equilibrium. Once you have these values, substitute them into the equilibrium constant expression and calculate the value of K.
The equilibrium constant, K, is a dimensionless quantity that represents the ratio of the concentrations of products to reactants at equilibrium. It provides insight into the extent of the reaction and the relative concentrations of reactants and products in the equilibrium mixture.
To learn more about equilibrium:
https://brainly.com/question/30694482
#SPJ11
Calculate the ?G°rxn using the following information.2 HNO3(aq) + NO(g) ? 3 NO2(g) + H2O(l) ?G°rxn = ??H°f (kJ/mol) -207.0 91.3 33.2 -285.8S°(J/mol•K) 146.0 210.8 240.1 70.0Determine the equilibrium constant for the following reaction at 498 K.2 Hg(g) + O2(g) ? 2 HgO(s)?H° = -304.2 kJ; ?S° = -414.2 J/KDetermine the equilibrium constant for the following reaction at 655 K.HCN(g) + 2 H2(g) ? CH3NH2(g)?H° = -158 kJ; ?S°= -219.9 J/KDetermine the equilibrium constant for the following reaction at 549 K.CH2O(g) + 2 H2(g) ? CH4(g) + H2O(g)?H° = - 94.9 kJ; ?S°= - 224.2 J/KEstimate ?G°rxn for the following reaction at 775 K.2 Hg(g) + O2(g) ? 2 HgO(s)?H°= -304.2 kJ; ?S°= -414.2 J/KCalculate ?S°rxn for the following reaction. The S° for each species is shown below the reaction.N2H4(l) + H2(g) ? 2 NH3(g)S° (J/mol•K) 121.2 130.7 192.8
To calculate the standard Gibbs free energy change (?G°rxn) for the given reaction, we can use the formula:
?G°rxn = ?Σn?G°f (products) - Σn?G°f (reactants)
where? Σn represents the sum of the coefficients of the products and reactants in the balanced chemical equation and ?G°f represents the standard Gibbs free energy of formation for each compound involved in the reaction. The values of ?H°f and S° for each compound are given in the table.
For the given reaction:
2 HNO3(aq) + NO(g) ? 3 NO2(g) + H2O(l)
Σn = 3 - 3 = 0
ΔG°rxn = (3 × ?G°f (NO2(g)) + ?G°f (H2O(l))) - (2 × ?G°f (HNO3(aq)) + ?G°f (NO(g)))
ΔG°rxn = (3 × 33.2 kJ/mol + (-237.1 kJ/mol)) - (2 × (-207.0 kJ/mol) + 91.3 kJ/mol)
ΔG°rxn = -225.1 kJ/mol
Therefore, the standard Gibbs free energy change for the given reaction is -225.1 kJ/mol.
The equilibrium constant (K) for a reaction can be calculated using the following formula:
K = e^(-ΔG°/RT)
where ΔG° is the standard Gibbs free energy change for the reaction, R is the gas constant (8.314 J/mol•K), and T is the temperature in Kelvin.
For the first reaction:
2 Hg(g) + O2(g) ? 2 HgO(s)
ΔH° = -304.2 kJ/mol
ΔS° = -414.2 J/K/mol
T = 498 K
ΔG° = ΔH° - TΔS°
ΔG° = -304.2 × 10^3 J/mol - 498 K × (-414.2 J/K/mol)
ΔG° = -304.2 × 10^3 J/mol + 205.7 × 10^3 J/mol
ΔG° = -98.5 × 10^3 J/mol
K = e^(-ΔG°/RT)
K = e^((-(-98.5 × 10^3 J/mol))/(8.314 J/mol•K × 498 K))
K = 1.72 × 10^-23
Therefore, the equilibrium constant for the first reaction at 498 K is 1.72 × 10^-23.
For the second reaction:
HCN(g) + 2 H2(g) ? CH3NH2(g)
ΔH° = -158 kJ/mol
ΔS° = -219.9 J/K/mol
T = 655 K
ΔG° = ΔH° - TΔS°
ΔG° = -158 × 10^3 J/mol - 655 K × (-219.9 J/K/mol)
ΔG° = -158 × 10^3 J/mol + 143.9 × 10^3 J/mol
ΔG° = -14.1 × 10^3 J/mol
K = e^(-ΔG°/RT)
K = e^((-(-14.1 × 10^3 J/mol))/(8.314 J/mol•K × 655 K))
K = 2
Learn more about Gibbs free energy here:
https://brainly.com/question/20358734
#SPJ11
determine the temperature of a reaction if k = 1.20 x 10⁻⁶ when ∆g° = 21.10 kj/mol.
Therefore, the temperature of the reaction is approximately 1,014 K.
The relationship between the equilibrium constant (K) of a reaction and the standard Gibbs free energy change (∆G°) at a given temperature (T) is given by the following equation:
∆G° = -RT ln(K)
where R is the gas constant (8.314 J/mol K) and ln represents the natural logarithm. Solving for temperature (T):
T = -∆G° / (R ln(K))
Plugging in the given values:
T = -21.10 kJ/mol / (8.314 J/mol K * ln(1.20 x 10^-6))
T = 1,014 K (to 3 significant figures)
To know more about temperature,
https://brainly.com/question/29072206
#SPJ11
How many of the following species are diamagnetic? Cs, Zr2+, Al3+, Hg2+ A. 2 B. 3 C.4 D. 1 E.O
Cs and Zr²⁺ are paramagnetic, while Al³⁺ and Hg²⁺ are diamagnetic. Therefore, out of the given species, Al³⁺ and Hg²⁺ are diamagnetic, the correct answer is A. 2.
To determine whether a species is diamagnetic or not, we need to consider the electron configuration and the presence of unpaired electrons.
Cs: The electron configuration of Cs is [Xe]6s¹, which means it has one unpaired electron. Cs is paramagnetic, not diamagnetic.Zr²⁺: The electron configuration of Zr²⁺ is [Kr]4d². Zr²⁺ has two unpaired electrons and is paramagnetic, not diamagnetic.Al³⁺: The electron configuration of Al³⁺ is [Ne]2s² 2p⁶. Al3+ has no unpaired electrons and is diamagnetic.Hg²⁺: The electron configuration of Hg²⁺ is [Xe]4f¹⁴ 5d⁵. Hg²⁺ has no unpaired electrons and is diamagnetic.Learn more about diamagnetic: https://brainly.com/question/2272751
#SPJ11
Weak acids make better buffers than strong acids because they have _____. conjugate bases of reasonable strength weak conjugate bases low ph values.
Weak acids make better buffers than strong acids because they have weak conjugate bases. Conjugate bases of reasonable strength weak conjugate bases low ph values.
A buffer is a solution that can resist changes in pH when an acid or a base is added to it. Weak acids have weak conjugate bases that are able to accept protons, which means that they can help to neutralize added base, preventing the pH from changing too drastically. Strong acids, on the other hand, have strong conjugate bases that do not readily accept protons, making them less effective as buffers.
Additionally, weak acids typically have a pH closer to neutral (around 4-6) compared to strong acids, which have a very low pH. This makes it easier to adjust the pH of a weak acid buffer solution without overshooting the desired pH range. Overall, weak acids with weak conjugate bases are better suited for use as buffers because they can help to maintain a stable pH range in a solution.
Learn more about buffer here:
https://brainly.com/question/22821585
#SPJ11
rank the following compounds in order of solubility in pure water (least to most soluble).a. caso4, ksp = 2.4 × 10–5b. mgf2, ksp = 6.9 × 10–9c. pbcl2, ksp = 1.7 × 10–5
The order of solubility in pure water (least to most soluble) is:
1. MgF2, Ksp = 6.9 × 10^–9 (least soluble)
2. PbCl2, Ksp = 1.7 × 10^–5
3. CaSO4, Ksp = 2.4 × 10^–5 (most soluble)
The solubility product constant (Ksp) is a measure of the equilibrium concentration of ions in a saturated solution of a compound.
A lower Ksp value indicates lower solubility, while a higher Ksp value indicates higher solubility.
From the given values of Ksp, it can be seen that MgF2 has the smallest Ksp value, indicating that it is the least soluble among the three compounds.
PbCl2 has a larger Ksp value than MgF2 but is smaller than CaSO4, indicating intermediate solubility. CaSO4 has the largest Ksp value, indicating that it is the most soluble among the three compounds.
Therefore, the order of solubility is b < c < a.
To know more about the solubility product constant, click below.
https://brainly.com/question/31605015
#SPJ11
An exothermic reaction causes the surroundings to A) warm up B) become acidic C) condense D) decrease in temperature E) release CO2
An exothermic reaction causes the surroundings to A) warm up.
An exothermic reaction causes the surroundings to warm up. In an exothermic reaction, energy is released from the system to the surroundings in the form of heat, this transfer of energy resulting in an increase in temperature. The system is the chemical reaction that is taking place, while the surroundings are everything outside of the system that can be affected by the reaction.
Therefore, the answer to the question is A) warm up.
Learn more about exothermic reaction : https://brainly.com/question/2924714
#SPJ11
How many grams of thallium may be formed by the passage of 7,678 amps for 3.23 hours through an electrolytic cell that contains a molten Tl(I) salt.
Approximately 190 grams of thallium may be formed by the passage of 7,678 amps for 3.23 hours through an electrolytic cell that contains a molten Tl(I) salt. Faraday's Law, which states that the amount of substance produced by electrolysis is directly proportional to the quantity of electricity passed through the cell.
The formula for this is: moles of substance = (current x time) / (96500 x n) where current is measured in amperes, time is measured in seconds, n is the number of electrons transferred per mole of substance, and 96500 is the Faraday constant.
In this case, we are given the current (7,678 amps) and the time (3.23 hours, which is 11,628 seconds). We also know that the substance being electrolyzed is Tl(I) salt, which has a charge of +1. Therefore, n = 1.
Using the formula above, we can calculate the moles of thallium produced: moles of Tl = (7678 x 11628) / (96500 x 1) = 0.930 moles. To convert moles to grams, we need to multiply by the molar mass of thallium, which is 204.38 g/mol: grams of Tl = 0.930 moles x 204.38 g/mol = 190.04 grams
Therefore, approximately 190 grams of thallium may be formed by the passage of 7,678 amps for 3.23 hours through an electrolytic cell that contains a molten Tl(I) salt.
For more such questions on Faraday's Law
https://brainly.com/question/17012638
#SPJ11
Approximately 182 grams of thallium (Tl) may be formed by the passage of 7,678 amps for 3.23 hours through an electrolytic cell that contains a molten Tl(I) salt.
To calculate the amount of Tl formed, we need to use Faraday's law of electrolysis, which states that the amount of substance formed during electrolysis is directly proportional to the quantity of electricity passed through the cell.
The formula for Faraday's law is:
Amount of substance = (Current × Time × Atomic weight) / (Valency × Faraday constant)
In this case, the current is 7,678 amps, the time is 3.23 hours, the atomic weight of Tl is 204.38 g/mol, the valency is 1, and the Faraday constant is 96,485 coulombs/mol.
Plugging these values into the formula, we get:
Amount of substance = (7,678 × 3.23 × 204.38) / (1 × 96,485) = 182.04 g
Therefore, approximately 182 grams of thallium may be formed by the passage of 7,678 amps for 3.23 hours through an electrolytic cell that contains a molten Tl(I) salt.
learn more about thallium here:
https://brainly.com/question/25203208
#SPJ11
An atom of 51K has a mass of 50.975828 amu.
mass of1H atom = 1.007825 amu
mass of a neutron = 1.008665 amu
Calculate the binding energy in kilojoule per mole.
So, the binding energy in kilojoules per mole is 12.13 kJ/mol.
The binding energy per mole is a measure of the energy required to disassemble a molecule into its individual atoms, and is commonly used in chemistry to describe the stability of molecules.
The atomic number (Z) of an element is the number of protons in its nucleus, and is used to identify the element. The atomic mass (A) of an element is the mass of the nucleus plus the mass of the electrons, and is expressed in atomic mass units (amu).
The binding energy per mole can be calculated using the formula:
Binding energy (kJ/mol) = (Atomic number * atomic mass) / (3 * Avogadro's number)
Where Atomic number = 51, Atomic mass = 50.975828 amu
Atomic number = 51, Atomic mass = 50.975828 amu
Atomic number = 51, Atomic mass = 50.975828 amu
(51 * 1.008665) / [tex](3 * 6.022 x 10^{23})[/tex]
= 12.13 kJ/mol
Learn more about binding energy visit: brainly.com/question/23020604
#SPJ4
Select ALL that are always TRUE for a spontaneous process.Group of answer choices∆H > 0 and ∆S < 0∆Suniverse > 0∆G < 0K = 1Q < K
∆G < 0 are always true for a spontaneous process.
A spontaneous process is one that occurs without the need for external intervention and leads to an increase in the entropy (disorder) of the universe. The spontaneity of a process is determined by the change in Gibbs free energy (∆G), which is given by the equation:
∆G = ∆H - T∆S
where ∆H is the change in enthalpy (heat) of the system, T is the temperature, and ∆S is the change in entropy of the system.
For a spontaneous process, ∆G must be negative, which means that the system is releasing free energy and the process is energetically favorable. Therefore, ∆G < 0 is always true for a spontaneous process.
The other options may or may not be true for a spontaneous process, depending on the specific conditions of the process. For example, if the process occurs at a low temperature, it may have a positive ∆S and a negative ∆H, which would make ∆G negative and the process spontaneous.
Similarly, if the reaction quotient Q is smaller than the equilibrium constant K, the process will be spontaneous, but if Q is larger than K, the process will be non-spontaneous. Therefore, these options cannot be universally true for a spontaneous process.
For more question on spontaneous process click on
https://brainly.com/question/30219227
#SPJ11
The only statement that is always true for a spontaneous process is ∆G < 0. A spontaneous process is one that occurs without external intervention.
A spontaneous process is one that occurs without external intervention, and ∆G (the change in Gibbs free energy) is a thermodynamic parameter that determines whether a process is spontaneous or not.
If ∆G is negative, the process is spontaneous, and if ∆G is positive, the process is non-spontaneous. If ∆G is zero, the system is in equilibrium. Therefore, ∆G < 0 is always true for a spontaneous process.
The other statements listed may or may not be true for a spontaneous process depending on the specific conditions of the process. For example, ∆H > 0 and ∆S < 0 can still result in a spontaneous process if the temperature is high enough such that T∆S > ∆H, making ∆G < 0.
Similarly, ∆Suniverse > 0 is not always true for a spontaneous process since there can be cases where the entropy of the system decreases but the entropy of the surroundings increases by a larger amount, resulting in a decrease in ∆Suniverse.
Lastly, K = 1 and Q < K are related to the equilibrium constant, and the spontaneity of a process is not determined solely by the equilibrium constant.
Learn more about spontaneous process here :
https://brainly.com/question/12319501
#SPJ11
The initial activity of a sample of the cesium isotope 137Cs is 135 mCi . When delivered to a hospital 14 hours later, its activity is 95 mCi.
A) What is the isotope's half life? (in hours)
B) If the minimum usable activity is 10mCi, how long after delivery at the hospital is the sample usable? (also in hours)
A) The sample will be usable for approximately 104.45 hours (or about 4.35 days) after delivery to the hospital. To find the half life of 137Cs, we can use the formula for radioactive decay:
A = A0(1/2)^(t/T), where A is the activity at time t, A0 is the initial activity, T is the half life, and (1/2)^(t/T) is the fraction of the original activity remaining at time t.
Plugging in the given values, we get:
95 = 135(1/2)^(14/T)
Dividing both sides by 135 and taking the natural logarithm of both sides, we can solve for T:
ln(95/135) = ln(1/2)^(14/T)
ln(95/135) = -(14/T)ln(2)
T = -14/(ln(95/135)/ln(2))
T = 30.17 hours
Therefore, the half life of 137Cs is approximately 30.17 hours.
B) We can use the same formula as above to find the time it takes for the activity to drop to 10mCi:
10 = 135(1/2)^(t/30.17)
Dividing both sides by 135 and taking the natural logarithm of both sides, we can solve for t:
ln(10/135) = -(t/30.17)ln(2)
t = -30.17ln(10/135)/ln(2)
t = 104.45 hours
Therefore, the sample will be usable for approximately 104.45 hours (or about 4.35 days) after delivery to the hospital.
For more such questions on radioactive
https://brainly.com/question/25923400
#SPJ11
A) The radioactive decay equation, A = A0(1/2)(t/T), can be used to determine the half life of 137Cs. In this equation, A is the activity at time t, A0 is the starting activity, T is the half life, and (1/2)(t/T) is the percentage of the original activity still present at time t.
By entering the specified values, we obtain:
95 = 135(1/2)^(14/T)
We may find the value of T by taking the natural logarithm of both sides and dividing both sides by 135:
ln(95/135) = ln(1/2)^(14/T)
ln(95/135) = -(14/T)ln(2)
T = -14/(ln(95/135)/ln(2))
T equals 30.17 hours
As a result, 137Cs has a half life of about 30.17 hours.
B) The time it takes for the activity to decrease to 10 mCi can be calculated using the same calculation as above:
10 = 135(1/2)^(t/30.17)
by 135 and dividing both sides by, We can find t by using the natural logarithm of both sides:
ln(10/135) = -(t/30.17)ln(2)
t = -30.17ln(10/135)/ln(2)
t equals 104.45 hours
Therefore, after being delivered to the hospital, the sample will be useful for about 104.45 hours (or about 4.35 days).
learn more about radioactive here:
https://brainly.com/question/1770619
#SPJ11
What is the molar solubility of Ag.PO in water? Ksp (Ag3PO4) = 1.4x10-16 (A) 1.1x10M (B) 4.8x10-SM (C) 5.2x10M (D) 6.8x10'M 1.LR.
The molar solubility of [tex]Ag_3PO_4[/tex] in water is [tex]4.78*10^{-6} M[/tex], which corresponds to answer (B).
The solubility product expression for silver phosphate ([tex]Ag_3PO_4[/tex]) is:
Ksp = [tex][Ag^+]^3[PO_4^{3-}][/tex]
Let x be the molar solubility of [tex]Ag_3PO_4[/tex] in water, then the equilibrium concentration of silver ions [[tex]Ag^+[/tex]] is also x, and the equilibrium concentration of phosphate ions [[tex]PO_4^{3-}[/tex]] is 3x, because the stoichiometry of the reaction is 1:3.
Substituting these values into the Ksp expression gives:
[tex]Ksp = x^{3(3x)} = 3x^4[/tex]
Solving for x:
[tex]x = (Ksp/3)^{(1/4)} = (1.4*10^{-16/3})^{(1/4)} = 4.78*10^{-6} M[/tex]
For more question on molar solubility click on
https://brainly.com/question/28202068
#SPJ11
Suppose you burn a 2. 5 g sample of potato chips. You use the heat given off from that process to heat 34. 3 g of water from 16. 1 oC to 20. 1 oC. What is the caloric value (in kcal/g) of the potato chips?
Three significant figures, the caloric value of the potato chips is approximately 54.9 kcal/g.
To determine the caloric value of the potato chips, we need to calculate the amount of heat transferred from the burning process to the water. The formula to calculate heat transfer is:
q = m * c * ΔT
where:
q is the heat transferred,
m is the mass of the water,
c is the specific heat capacity of water,
ΔT is the change in temperature.
Given:
m (mass of water) = 34.3 g
c (specific heat capacity of water) = 1 cal/g°C
ΔT (change in temperature) = 20.1°C - 16.1°C = 4°C
Substituting these values into the formula, we have:
q = 34.3 g * 1 cal/g°C * 4°C = 137.2 cal
Since 1 kcal = 1000 cal, the caloric value of the potato chips can be calculated as:
Caloric value = q (heat transferred) / mass of potato chips
Assuming complete combustion, the heat transferred is equal to the caloric value of the potato chips. Therefore:
Caloric value = 137.2 cal / 2.5 g = 54.88 kcal/g
Rounding to three significant figures, the caloric value of the potato chips is approximately 54.9 kcal/g.
To learn more about calorie click here:
brainly.com/question/31446016
#SPJ11
a spring system doing simple harmonic motion has an amplitude of 5.00 cm and a maximum speed of 30.0 cm/s. what is the displacement when its speed is 15.0 cm/s?
The displacement of the spring system when its speed is 15.0 cm/s is 3.75 cm.
The amplitude (A) of a spring system doing simple harmonic motion is the maximum displacement from the equilibrium position. In this case, the amplitude is given as 5.00 cm.
The maximum speed (v_max) occurs when the displacement is zero, and is equal to the amplitude multiplied by the angular frequency (ω) of the motion:
v_max = Aω
We can rearrange this equation to solve for the angular frequency:
ω = v_max / A
The displacement (x) of the spring system at any given time can be expressed as:
x = Acos(ωt)
where t is the time. To find the displacement when the speed is 15.0 cm/s, we need to first find the corresponding time.
At this speed, the velocity is half of the maximum velocity, so we can set:
15.0 cm/s = (1/2)v_max
Solving for v_max gives:
v_max = 30.0 cm/s
So, we have:
ω = v_max / A = (30.0 cm/s) / (5.00 cm) = 6.00 s⁻¹
Now, we can use the equation for displacement to find x when the velocity is 15.0 cm/s:
x = Acos(ωt)
15.0 cm/s = -Aωsin(ωt)
sin(ωt) = -(15.0 cm/s) / (Aω) = -0.50
At this point, we can use a calculator to find the value of the angle (ωt) that gives a sin of -0.50, which is approximately 30°.
Since we know that the displacement is at its maximum when the speed is zero, we can subtract the amplitude multiplied by the cosine of 30° to find the displacement at the given speed:
x = Acos(ωt) - A = (5.00 cm)cos(30°) - (5.00 cm) = 3.75 cm
To know more about spring system, refer here:
https://brainly.com/question/30393799#
#SPJ11
a solution has a proton, [h ], concentration of 2.00 × 10-6 m. what is the ph of the solution?
The pH of the solution is 5.70, which indicates that the solution is slightly acidic.
The pH of a solution is a measure of its acidity or basicity and is defined as the negative logarithm of the hydrogen ion concentration [H+].
The pH of a solution can be calculated using the formula: pH = -log[H+]. In this case, the [H+] concentration is 2.00 × [tex]10^{-6}[/tex] M.
Substituting this value into the formula, we get pH = -log(2.00 × [tex]10^{-6}[/tex]) = 5.70.
Therefore, the pH of the solution is 5.70, which indicates that the solution is slightly acidic.
To know more about ions, refer here:
https://brainly.com/question/13692734#
#SPJ11
The pH of 0.10 M NH3 is closest to11.132.875.138.87
The pH of 0.10 M NH3 is closest to 11.14.
Option(A)
The Kb value for ammonia, NH3, is 1.8 × 10^-5 at 25°C. The expression for the Kb value is:
Kb = [NH4+][OH-]/[NH3]
where [NH4+] is the concentration of ammonium ion, [OH-] is the concentration of hydroxide ion, and [NH3] is the concentration of ammonia. We can use the relationship Kw = Ka × Kb, where Kw is the ion product constant for water (1.0 × 10^-14 at 25°C) and Ka is the acid dissociation constant for NH4+.
Ka can be calculated from the following equation:
Ka = Kw/Kb = (1.0 × 10^-14)/(1.8 × 10^-5) = 5.56 × 10^-10
At equilibrium, the following reaction occurs:
NH3 + H2O ⇌ NH4+ + OH-
Since NH3 is a weak base, we can assume that its initial concentration is equal to its equilibrium concentration. Therefore, we can use the Kb expression to solve for [OH-]:
Kb = [NH4+][OH-]/[NH3] => [OH-] = Kb[NH3]/[NH4+] = (1.8 × 10^-5)(0.10)/[NH4+]
Since NH4+ is the conjugate acid of NH3, we can assume that it is formed by the reaction of NH3 with water:
NH3 + H2O ⇌ NH4+ + OH-
Therefore, the concentration of NH4+ is equal to [H3O+], and we can use the expression for the acid dissociation constant to solve for [H3O+]:
Ka = [NH4+][H3O+]/[NH3] => [H3O+] = Ka[NH3]/[NH4+] = (5.56 × 10^-10)(0.10)/[NH4+]
Since the solution is in equilibrium, [OH-][H3O+] = Kw = 1.0 × 10^-14. Therefore:
[OH-][H3O+] = (1.8 × 10^-5)(0.10)[NH4+]/[NH3] × (5.56 × 10^-10)(0.10)[NH3]/[NH4+] = 1.0 × 10^-14
Simplifying this equation, we get:
[NH4+][OH-] = 1.0 × 10^-14
Substituting [OH-] = (1.8 × 10^-5)(0.10)/[NH4+] into this equation, we get:
[NH4+] = 0.10/(1.8 × 10^-5)(1.8 × 10^-5)(0.10) = 3.086 M
Finally, we can calculate the pH of the solution using the expression:
pH = -log[H3O+] = -log[(5.56 × 10^-10)(0.10)/3.086] = 11.14 Option(A)
For such more questions on pH
https://brainly.com/question/172153
#SPJ11
The pH of 0.10 M NH3 is closest to 11.14. Option(A) Finally, we can calculate the pH of the solution using the expression: pH = -log[H3O+] = -log[(5.56 × 10^-10)(0.10)/3.086] = 11.14 Option(A).
The Kb value for ammonia, NH3, is 1.8 × 10^-5 at 25°C. The expression for the Kb value is:
Kb = [NH4+][OH-]/[NH3]
where [NH4+] is the concentration of ammonium ion, [OH-] is the concentration of hydroxide ion, and [NH3] is the concentration of ammonia. We can use the relationship Kw = Ka × Kb, where Kw is the ion product constant for water (1.0 × 10^-14 at 25°C) and Ka is the acid dissociation constant for NH4+.
Ka can be calculated from the following equation:
Ka = Kw/Kb = (1.0 × 10^-14)/(1.8 × 10^-5) = 5.56 × 10^-10
At equilibrium, the following reaction occurs:
NH3 + H2O ⇌ NH4+ + OH-
Since NH3 is a weak base, we can assume that its initial concentration is equal to its equilibrium concentration. Therefore, we can use the Kb expression to solve for [OH-]:
Kb = [NH4+][OH-]/[NH3] => [OH-] = Kb[NH3]/[NH4+] = (1.8 × 10^-5)(0.10)/[NH4+]
Since NH4+ is the conjugate acid of NH3, we can assume that it is formed by the reaction of NH3 with water:
NH3 + H2O ⇌ NH4+ + OH-
Therefore, the concentration of NH4+ is equal to [H3O+], and we can use the expression for the acid dissociation constant to solve for [H3O+]:
Ka = [NH4+][H3O+]/[NH3] => [H3O+] = Ka[NH3]/[NH4+] = (5.56 × 10^-10)(0.10)/[NH4+]
Since the solution is in equilibrium, [OH-][H3O+] = Kw = 1.0 × 10^-14. Therefore:
[OH-][H3O+] = (1.8 × 10^-5)(0.10)[NH4+]/[NH3] × (5.56 × 10^-10)(0.10)[NH3]/[NH4+] = 1.0 × 10^-14
Simplifying this equation, we get:
[NH4+][OH-] = 1.0 × 10^-14
Substituting [OH-] = (1.8 × 10^-5)(0.10)/[NH4+] into this equation, we get:
[NH4+] = 0.10/(1.8 × 10^-5)(1.8 × 10^-5)(0.10) = 3.086 M
Learn more about pH here:
brainly.com/question/172153
#SPJ11
What is the vapor pressure of a solution that contains 2.60 mol glucose dissolved in 100.0 g of water? The vapor pressure of pure water is 2.4 kPa.Answer choices3.5 kPa0.28 kPa0.77 kPa1.6 kPa
The correct answer is 1.6 kPa.
To calculate the vapor pressure of a solution, we need to use Raoult's Law which states that the vapor pressure of a solution is directly proportional to the mole fraction of the solvent in the solution.
First, we need to calculate the mole fraction of water in the solution.
Moles of water = mass/molar mass = 100.0 g / 18.015 g/mol = 5.548 mol
Total moles in solution = 5.548 + 2.60 = 8.148 mol
Mole fraction of water = 5.548/8.148 = 0.680
Mole fraction of glucose = 2.60/8.148 = 0.320
Using Raoult's Law, we can calculate the vapor pressure of the solution:
vapor pressure = mole fraction of water x vapor pressure of pure water
vapor pressure = 0.680 x 2.4 kPa = 1.632 kPa
Therefore, the answer is 1.6 kPa.
To know more about Raoult's Law visit:
https://brainly.com/question/2253962
#SPJ11
calculate the number of molecules of acetyl-scoa derived from a saturated fatty acid with 20 carbon atoms. express your answer as an integer.
10 acetyl-CoA molecules will contain a total of 230 atoms: 20 carbon atoms, 30 oxygen atoms, 10 sulfur atoms, and 190 hydrogen atoms.
To calculate the number of molecules of acetyl-CoA derived from a saturated fatty acid with 20 carbon atoms, we need to first break down the fatty acid into individual acetyl-CoA molecules. Each acetyl-CoA molecule is produced by the breakdown of a two-carbon unit from the fatty acid chain. Therefore, a saturated fatty acid with 20 carbon atoms will produce 10 acetyl-CoA molecules.
Since acetyl-CoA is a molecule composed of atoms of carbon, hydrogen, oxygen, and sulfur, we cannot express the number of molecules as an integer. However, we can express the number of atoms in the 10 acetyl-CoA molecules as follows:
Each acetyl-CoA molecule contains 23 atoms: 2 carbon atoms, 3 oxygen atoms, 1 sulfur atom, and 19 hydrogen atoms.
Therefore, 10 acetyl-CoA molecules will contain a total of 230 atoms: 20 carbon atoms, 30 oxygen atoms, 10 sulfur atoms, and 190 hydrogen atoms.
To know more about hydrogen atoms visit:
https://brainly.com/question/29695801
#SPJ11
how many electrons are transferred in the following reaction? cr2o72– 14h 6cl– → 2cr3 3cl2 7h2o
In the given reaction, a total of 6 electrons are transferred when dichromate ion reacts to form chromium(III) and chlorine.
How many electrons participate in the reaction?To determine the number of electrons transferred in the given reaction, we need to balance the oxidation states of the elements involved.
In the dichromate ion (Cr₂ O₇ [tex]-2[/tex]), each chromium atom has an oxidation state of +6, while each oxygen atom has an oxidation state of -2. The overall charge of the ion is 2-.
In the products, each chromium atom in Cr₃ has an oxidation state of +3, while each chlorine atom in Cl₂ has an oxidation state of 0. The hydrogen atoms in H₂O have an oxidation state of +1, and each oxygen atom in H₂O has an oxidation state of -2.
By comparing the oxidation states of chromium in the reactant (Cr₂O₇ [tex]-2[/tex]) and the products (Cr₃ ), we can see that each chromium atom has gained 3 electrons.
Since there are two chromium atoms in the reactant, the total number of electrons transferred is:
2 chromium atoms × 3 electrons/atom = 6 electrons
Therefore, 6 electrons are transferred in the given reaction.
Learn more about electrons
brainly.com/question/12001116
#SPJ11
If 36. 0 g of NaOH (MM = 40. 00 g/mol) are added to a 500. 0 mL volumetric flask, and water is added to fill the flask, what is the concentration of NaOH in the resulting solution?
To determine the concentration of NaOH in the resulting solution, we need to calculate the number of moles of NaOH and then divide it by the volume of the solution. The given mass of NaOH and the volume of the flask can be used to find the concentration.
The concentration of a solution is defined as the amount of solute (in moles) divided by the volume of the solution (in liters). In this case, we are given the mass of NaOH as 36.0 g and the volume of the volumetric flask as 500.0 mL (which can be converted to liters by dividing by 1000).
To find the number of moles of NaOH, we divide the given mass by the molar mass of NaOH. The molar mass of NaOH is 40.00 g/mol. By dividing 36.0 g by 40.00 g/mol, we can determine the number of moles of NaOH.
Once we have the number of moles of NaOH, we divide it by the volume of the solution (500.0 mL or 0.500 L) to obtain the concentration in moles per liter (M).
Learn more about molar mass here:
https://brainly.com/question/31545539
#SPJ11
how many moles of sulfur trioxide are formed from 3.0 moles of oxygen using the given balanced equation
6 moles of sulfur trioxide are formed from 3.0 moles of oxygen in the reaction 2SO₂+ O₂ → 2SO₃
A mole is defined as the amount of substance (atoms, molecules or ions) present in a particular species.
According to given data:
Number of moles of oxygen react = 3 mol
To find: Number of moles of SO₃ formed = ?
The balanced Chemical equation is given as:
2SO₂+ O₂ → 2SO₃
now we will compare the moles of oxygen and sulfur trioxide.
O₂ : SO₃
1 : 2
3 : 2/1×3 = 6 moles
Thus, 6 moles of SO₃ will formed.
To know more about moles here
https://brainly.com/question/19931937
#SPJ4
The complete question is
how many moles of sulfur trioxide are formed from 3.0 moles of oxygen using the given balanced equation 2SO₂+ O₂ → 2SO₃
The percentage yield for the following reaction is 81.8%.
PCl3 + Cl2 → PCl5
What mass of PCl5 is expected from the reaction of 80.1 g PCl3 with excess chlorine?
The expected mass of PCl₅ from the reaction of 80.1 g of PCl₃ with excess chlorine is 121.34 g.
To calculate the expected mass of PCl₅ from the reaction, we need to consider the molar masses and the stoichiometry of the reaction. Here's how you can calculate it:
Determine the molar masses:
PCl₃ (Phosphorus trichloride) = 137.33 g/mol
Cl₂ (Chlorine) = 70.90 g/mol
PCl₅ (Phosphorus pentachloride) = 208.24 g/mol
Convert the given mass of PCl₃ to moles:
Moles of PCl₃ = Mass of PCl₃ / Molar mass of PCl₃
Moles of PCl₃ = 80.1 g / 137.33 g/mol
Use stoichiometry to determine the moles of PCl₅ formed:
From the balanced equation, we can see that the ratio of moles of PCl₃ to PCl₅ is 1:1. So, the moles of PCl₅ formed will be the same as the moles of PCl₃.
Calculate the expected mass of PCl₅:
Mass of PCl₅ = Moles of PCl₅ × Molar mass of PCl₅
Mass of PCl₅ = Moles of PCl₃ × Molar mass of PCl₅
Since the moles of PCl₅ formed is equal to the moles of PCl₃.
Substitute this value into the equation:
Mass of PCl₅ = Moles of PCl₃ × Molar mass of PCl₅
Mass of PCl₅ = (80.1 g / 137.33 g/mol) × 208.24 g/mol
Calculate the expected mass of PCl₅:
Mass of PCl₅ = 80.1 g × (208.24 g/mol / 137.33 g/mol)
Mass of PCl₅ ≈ 121.34 g
Therefore, the expected mass of PCl₅ from the reaction of 80.1 g of PCl₃ with excess chlorine is approximately 121.34 g.
know more about molar masses here:
https://brainly.com/question/837939
#SPJ11