The delay vector for node F as follows:
F: [5, 2, ∞, ∞, ∞, 0, ∞, ∞]
This means that the estimated delay from node F to node A is 5, to node B is 2 and to node F itself is 0. And all other nodes are unreachable.
THE DISTANCE VECTOR ROUTING ALGORITHMThe Distance Vector Routing algorithm, also known as Bellman-Ford algorithm, is used to calculate the shortest path from a given source node to all other nodes in a network.
To calculate the new estimated delays from node F, we first initialize the delay vector for node F as follows:
F: [0, ∞, ∞, ∞, ∞, ∞, ∞, ∞]
Next, we update the delay vector for node F using the delay vectors received from its neighbors. For example, using the information provided in here, we can update the delay vector for node F as follows:
F: [5, 2, ∞, ∞, ∞, 0, ∞, ∞]
This means that the estimated delay from node F to node A is 5, to node B is 2 and to node F itself is 0. And all other nodes are unreachable.
We then repeat this process of updating the delay vector until the estimates converge and no further updates are required.
This is a simplified process and in real world scenario there will be more number of nodes and edges, and also the cost of each edge will be different.
Learn more about The Distance Vector Routing here:
https://brainly.com/question/29105702
#SPJ4
A hole is drilled through the midpoint of a meter stick. The meter stick is
then suspended so that it spins freely about its midpoint. If the mass of
the meter stick is 0.25 kg, what is its rotational inertia about the midpoint?
The rotational inertia of the meter stick about the midpoint is 0.0625 kg·m²
What is Rotational inertia?Rotational inertia, or moment of inertia, is the measure of an object's resistance to angular acceleration. It is calculated by multiplying the mass of the object by the square of its distance from the axis of rotation.In this case, the meter stick has a mass of 0.25 kg and is rotating about its midpoint. This means the distance from the axis of rotation to each end of the meter stick is 0.5 m (since the midpoint is the axis of rotation).Therefore, the rotational inertia of the meter stick about its midpoint is: Rotational inertia = 0.25 kg x (0.5 m)² = 0.0625 kg·m²
To learn more about Rotational inertia refer :
brainly.com/question/30326634
#SPJ1
A string of christmas lights contains 20 lights. The lights are wired in series, so that if any light fails, the whole string will go dark. Each light has probability 0. 98 of working for a 3-year period. The lights fail independently of each other.
The probability that a string of Christmas lights containing 20 lights are wired in series, so that if any light fails, the whole string will go dark = 0.6676 = 66.76%
There are just two conceivable outcomes for each light: either it works or it doesn't. The binomial distribution is utilized to answer this question since the likelihood that a light will operate independently of all other lights.
It's a binomial experiment. Since the bulbs are independent and there is only one way the string can stay lit
The success probability is:
1 -0.02 = 0.98
Hence, the probability that the string of lights will remain bright for 3 years is:
(0.98)²₀ = 0.667
= 66.67%
The question is incomplete, it should be:
Merry and bright? A string of Christmas lights contains 20 lights. The lights are wired in series, so that if any light fails, the whole string will go dark. Each light has probability 0.98 of working for a 3-year period. The lights fail independently of each other. Find the probability that the string of lights will remain bright for 3 years.
Learn more about probability here: https://brainly.com/question/13604758
#SPJ4
5- During the Canada Day fireworks demonstration, an observer measures the time difference between the
flash of light emitted, and the sound heard from the explosion to be 2.50 s. If the air temperature is 16°C.
how far away is the fireworks' explosion from the observer? (Velocity of sound is 345 m/s at 0 °C)
Answer:
Below
Explanation:
Speed of sound at 16 degrees C = 340.866 m/s
(Speed of sound at 0 degrees C is 331.3 m/s ....I do not know where they got the incorrect value of 345 m/s at 0 °C)
2.5 s * 340.866 m/s = 852 m away from fireworks
What are the benefits to using solar geothermal and wind power as alternative sources of energy?
The benefits of using solar, geothermal, and wind power as alternative sources of energy are low maintenance, accuracy, and highly renewable respectively.
Reduced electricity expenses, a wide range of applications, and minimal maintenance costs are all benefits of solar energy. The fact that it depends on the weather, that solar energy storage is expensive, and that it takes up a lot of space are some of its drawbacks.
Geothermal energy has the benefit of making it simpler to anticipate power output with pinpoint accuracy. Cons of energy management include high costs and the need for sustainability.
The benefit of wind energy is that it is a very clean and renewable energy source. It is readily available and has a low running cost. The energy's drawback is that it contributes to noise and visual pollution.
You can also learn about Geothermal energy from the following question:
https://brainly.com/question/1061324
#SPJ4
What are Superman's x and y components?
30 degrees
100 m
Answer:
x-component = 50√3
y-component = 50
Explanation:
Two-dimensional vectors consist of two components which are x-component and y-component. The vector equation can be written as:
[tex] \displaystyle{ \vec v = x \hat i + y \hat j}[/tex]
Each components also can be written in trigonometric form:
[tex] \displaystyle{x = | \vec v| \cos \theta} \\ \displaystyle{y = | \vec v| \sin \theta}[/tex]
The absolute of vector is called magnitude of vector which is already given in the problem (100 m). The measurement or theta is also given as well, therefore:
[tex] \displaystyle{x = 100 \cos 30 \degree } \\ \displaystyle{y = 100\sin 30 \degree}[/tex]
Then evaluate, we have to know that sin30° is 1/2 and cos30° is √3/2.
[tex] \displaystyle{x = 100 \times \dfrac{ \sqrt{3}}{2} } \\ \displaystyle{y = 100 \times \dfrac{1}{2}}[/tex]
Therefore, the components are:
[tex] \displaystyle{x = 50 \sqrt{3} } \\ \displaystyle{y = 50}[/tex]
A boy of 40kg and a girl of a ma an unknown ma play on a eeaw of negligible weigh. If the boy it 300cm from the pivot and the girl it 400m from the pivot what i the ma of the girl in order for the eeaw to be in equilibrium
The mass of the girl must be 30 kg for the see-saw to be in equilibrium.
In order for the see-saw to be in equilibrium, the total moment on one side of the pivot must be equal to the total moment on the other side of the pivot. The moment of an object is equal to its weight multiplied by its distance from the pivot.
So, for the see-saw to be in equilibrium:
40 kg * 300 cm = ma * 400 cm
ma = (40 kg * 300 cm) / 400 cm
ma = 30 kg
The mass of the girl must be 30 kg for the see-saw to be in equilibrium.
Learn more about the concept of torque and equilibrium in rotational dynamics. here: https://brainly.com/question/12830892
#SPJ4
gamma rays cannot be ___ or ____, but can cause_____.
Answer:
Gamma rays cannot be seen or felt, but can cause ionization.
Explanation:
Gamma rays are a type of electromagnetic radiation, similar to X-rays, radio waves, and visible light. They have the highest energy and the shortest wavelength in the electromagnetic spectrum. Gamma rays are emitted by the nuclei of atoms during certain types of radioactive decay.
Gamma rays cannot be seen or felt because they are electromagnetic waves, and not particles like visible light or sound waves. Gamma rays do not have enough energy to excite the atoms in our eyes, so we cannot see them. They also do not have enough energy to cause vibrations in our ears, so we cannot hear them.
Gamma rays can cause ionization when they interact with matter, meaning that they can knock electrons off atoms and molecules, creating ions. When gamma rays pass through matter, they can disrupt the electrons in atoms and molecules, which can cause damage to living cells and genetic material. This is why gamma rays are considered to be dangerous and are used in very limited circumstances, such as in cancer treatment, where the goal is to destroy cancer cells.
a acrostic poem using the word "transformation" that summarizes what you've learned about kinetic and potential energy.
The acrostic poem using the word "transformation" that summarizes what you've learned about kinetic and potential energy is given below
Tremendous force creates motion
Releasing energy in every notion
Acceleration leads to kinetic state
New forms of energy await
Formed through a change in position
Action and reaction in succession
Invisible forces at work
Never-ending cycle that lurks
Energy in constant flux
Making the world go round with tucks.
What is the acrostic poem about?The first letter T stands for "Tremendous force" that creates motion, this is related to kinetic energy. Kinetic energy is the energy of motion, it is the energy that an object possesses due to its motion. The more motion an object has, the more kinetic energy it possesses.
Also, The second letter R stands for "Releasing energy" in every notion, this refers to the transformation of potential energy into kinetic energy. Potential energy is the energy an object possesses due to its position or state, this energy is stored and can be released as kinetic energy.
Learn more about acrostic poem from
https://brainly.com/question/26346712
#SPJ1
Virginia currently has two nuclear power plants located in Mineral, VA and Surry, VA. Imagine you live in Wytheville, VA, which is in the western arm of the state. If your local government decided to build a nuclear power plant, consider how the people in your community would feel about this decision.
In complete sentences, discuss the following:
At least one benefit (positive outcome) of nuclear power discussed in this module (2 points)
At least one drawback (negative outcome) of nuclear power discussed in this module (2 points)
Based on this information, how would you feel about a nuclear power plant being built in your area? Explain why you feel this way. (2 points) HELP PLEASE
Located in Louisa County, Va, in the Mid-Atlantic region of the United States, the 1,075-acre North Ana Nuclear Power Plant is a nuclear power station. The Duke Virginia Power corporation and the Old Dominion Corporation jointly own the property, which is run by the Dominion Generation company.
What do you mean by nuclear?
The energy found in an atom's nucleus, or core, is referred to as nuclear energy. Electricity can be produced using nuclear energy, but it first needs to be freed from the atomic. 8 - 12+ Picture.
Which are the 3 different nuclear types?
Rocks, sunlight, and cosmic rays all emit tiny quantities of radiation that are constantly absorbed by all living organisms. Three kinds of radiation are taken into account in this background sheet: -particles, -particles, and -rays.
To know more about nuclear visit:
https://brainly.com/question/18187269
#SPJ1
An electromechanical device that will measure acceleration forces. These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic - caused by moving or vibrating the accelerometer.
Fixed automation, Programmable automation, Flexible automation are the types of automations in electromechanical device.
Fixed automation is typically employed for products with a very high production rate; the high initial cost of fixed-automation plant can therefore be spread over a very large number of units. Fixed-automation systems are used to manufacture products as diverse as cigarettes and steel nails.
The significant feature of fixed automation is that the sequence of the manufacturing operations is fixed by the design of the production machinery, and therefore the sequence cannot easily be modified at a later stage of a product’s life cycle.
Flexible automation can be considered to be an enhancement of programmable automation in which a computer-based manufacturing system as the capability to change the manufacturing program and the physical configuration of the machine tool or cell with a minimal loss in production time.
In many systems the machining programs are prepared at a location remote from the machine, and they are then transmitted as required over a computer-based local-area communication network.
To know more about electromechanical here
https://brainly.com/question/22605650
#SPJ4
A girl run at 5m/ for 2 econd, then walk at 4m/ for 3econd, an ride bicycle at 10m/ for 5econd what i average peed of the girl for the entire trip?
Answer:
Explanation:
jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjkkkkkkkkkkkkkkkkiiiiiiiiiikooooooooooooop
To find the average speed of the girl for the entire trip, we need to calculate the total distance covered and the total time taken.
Distance covered during running = speed x time = 5 m/s x 2 s = 10 m
Distance covered during walking = speed x time = 4 m/s x 3 s = 12 m
Distance covered during biking = speed x time = 10 m/s x 5 s = 50 m
Total distance covered = 10 m + 12 m + 50 m = 72 m
Total time taken = 2 s + 3 s + 5 s = 10 s
Average speed = Total distance covered / Total time taken
= 72 m / 10 s
= 7.2 m/s
summary of a article“what can i do to reduce my risk of developing cancer”
This article provides a comprehensive overview of the steps that can be taken to reduce the risk of developing cancer.
What is developing cancer?Developing cancer is a process in which abnormal cells in the body grow and divide uncontrollably. These abnormal cells can form tumors, invade other tissues, and spread to other parts of the body.
This article discusses ways to reduce the risk of developing cancer. It explains that there are many lifestyle changes that can be made to reduce the risk of cancer, such as eating a healthy diet, exercising regularly, avoiding smoking and excessive alcohol consumption, and limiting sun exposure. Additionally, the article suggests getting regular check-ups and screenings, as well as avoiding environmental toxins and pollutants. It also recommends getting vaccinated against certain viruses, such as HPV, which can increase the risk of certain types of cancer. Finally, the article emphasizes the importance of maintaining a healthy weight and reducing stress.
Overall, this article provides a comprehensive overview of the steps that can be taken to reduce the risk of developing cancer. By following the advice outlined in the article, individuals can take proactive steps to reduce their risk of developing cancer and improve their overall health.
To learn more about developing cancer
https://brainly.com/question/12657090
#SPJ1
Rodrigo was working really hard to make the track team and he finally made it. However, he is not one of the strongest runners and is becoming
rather discouraged because some of the other kids are obviously better athletes than he is: What does this example BEST illustrate?
A. why extrinsic motivation often fails.
B. why valuing exercise and health is not enough.
C. why joining a team is often really discouraging.
D. why there should be an interview when joining a team.
The answer of the following statement is (C) why joining a team is often really discouraging.
What is team?
Team refers to a group of two or more people who work together to achieve a common goal. A team usually consists of individuals with different skills and abilities who collaborate to complete a task or project. Teams are important in a variety of situations, including work, school, sports, and social activities. A successful team is one in which members are committed to the same goal, trust and respect one another, and are willing to take risks and learn from mistakes. Teams are most effective when members are open to constructive criticism, provide feedback, and are willing to put in the time and effort necessary to achieve their goals.
To learn more about team
https://brainly.com/question/13033545
#SPJ1
You weigh 710 N. What would you weigh if the Earth were three times as massive as it is and its radius were five times its present value? Answer in units of N
Answer:
85.2 N
Explanation:
You want to know your weight if the Earth were 3 times as massive and had 5 times the present radius. Your weight is 710 N.
WeightYour weight is proportional to the mass of the Earth and the square of the radius between your mass and the center of the Earth. The revised dimensions of the earth would multiply your weight by ...
W = k(M/r²) = 710 N
W' = k((3M)/(5r)²) = k(M/r²)(3/25) = (710 N)(3/25) = 82.5 N
Your weight would be 82.5 N.
A block with the mass of 14.26kg is on a ramp with an incline of 41 degrees. If the block is stationary, what is the minimum value of the coefficient of static friction? PART E
Answer: .86
Explanation:
A spring has a spring constant of 25 newtons per meter. The minimum force required to stretch the spring 0. 25 meter from its equilibrium position is approximately.
A spring has a spring constant of 25 newtons per meter. The minimum force required to stretch the spring 0. 25 meter from its equilibrium position is approximately 6.25 N.
The minimal force needed to stretch the wire is in the range of,
We knew that the force, extension, and spring constant are connected by the following formula according to Hooke's law:
Extension (E) = Force (F) x Spring constant (K) (e)
F = Ke
We may calculate the spring's extension from its equilibrium position using the aforementioned method.
F = ke
F= 25 x0.25
F= 6.25
Therefore, 6.25 N of minimum force is needed in the scenario described.
learn more about force at https://brainly.com/question/30015952
#SPJ4
Examine the following circuit diagram and state the value of
(a) V2 (b) I2 (c) R1 (d) R2 (e) RT
With the use of Ohm's law formula and some assumption, the answers are
(a) V2 = 30v
(b) I2 = 5 A
(c) R1 = 1 Ω
(d) R2 = 6 Ω
(e) RT = 4 Ω
What is Current ?Current can simply be defined as the rate at which charges flow in a conducting material. It is measured in Ampere.
From the given circuit,
a) V2 and V3 are in parallel, so they will have the same voltage. The voltage dropped in V1 should be taken away from the total voltage. That is,
V2 = VT - V1
V2 = 40 - 10
V2 = 30v
b) The current produced from the battery is assumed to split equally on R2 and R3. Therefore, I2 = 5 A
c) The total current will flow through I1. That is,
I1 = 10 A
Using Ohm's law V1 = I1 × R1
10 = 10 × R1
R1 = 10/10
R1 = 1 Ω
d) From Ohm's law, V2 = I2 × R2
30 = 5R2
R2 = 30/5
R2 = 6 Ω
e) By using Ohm's law again
VT = IT × RT
40 = 10 × RT
RT = 40/10
RT = 4Ω
Therefore, The resistance in R1, R2 and R3 are 1Ω, 6Ω and 6Ω
Learn more about Current here: https://brainly.com/question/24858512
#SPJ1
What is the kinetic energy of a 10 kg object moving at 2.0m S?
Answer: 20 J
Explanation: m = 10kg
v = 2 m/s
K.E of the object = 1/2 mv²
= 1/2 × 10 × 2 × 2
= 10 × 2
= 20 J
A car of mass 942.4 kg accelerates from rest with a constant power output of 140.5 hp. Neglecting air resistance , what is the speed of the car after 4.55 s?
The speed of the car after 4.55 s can be determined using the equation v = at, where v is the velocity of the car, a is the acceleration, and t is the time.
What is acceleration?
Acceleration is the rate of change of an object's velocity over time. It is the rate at which an object's speed or direction of motion changes. It is usually measured in meters per second squared (m/s2). Acceleration can be caused by a variety of forces, such as gravity, friction, or a push or pull.
Acceleration is the rate at which an object's speed or velocity changes over time. It is a vector quantity, meaning it has both a magnitude and a direction. Acceleration is typically measured in meters per second squared (m/s2).
To learn abou more acceleration.
https://brainly.com/question/460763
#SPJ1
What does the pressure at a point in a fluid depend on?
The pressure at a point in a fluid depends on its weight.
Weight is the product of mass of the object and the acceleration due to gravity.
Fluid pressure is the pressure at a point inside a fluid due to the weight of the fluid.
The pressure in liquids can be calculated using the following relationship,
[tex]P_{fluid}[/tex] = P + ρgh
where,
[tex]P_{fluid}[/tex] = pressure at a point in the fluid
P = pressure at reference point
ρ = Density of liquid
g = gravitational acceleration (relative to the ground g = 9.8 m/s)
h = Height from reference point
Two factors affect fluid pressure.
These two elements are the depth and density of the fluid.
Fluid depth: The pressure exerted by a fluid increases with depth.Liquid Density: Compared to lighter liquids like air, denser liquids like water create a higher pressure.Therefore the fluid pressure depends on the weight at a point.
To know more about weight,
https://brainly.com/question/13094863
#SPJ4
A crane and box are both initially at rest. At time t=0s, the crane begins to drive forward at a constant speed of 0. 5ms, while also lifting the box with an upward acceleration of 1ms2. The box does not swing while being lifted by the crane.
(c) Assume that, at t=0 s, the horizontal position of the box is x=0 and it has a vertical position of y=0. Derive an equation that describes the vertical position y of the box as a function of the horizontal position x of the box.
(d) Does your equation from part (c) agree with your sketch in part (b)? Justify your response
The equation that describes the vertical position y of the box as a function of the horizontal position x of the box is y = 1/2 x^2 + 0.5xt.
A crane and box are both initially at rest. At time t=0s, the crane begins to drive forward at a constant speed of 0. 5ms, while also lifting the box with an upward acceleration of 1ms2.
This equation agrees with the sketch in part (b) because it shows that the vertical position of the box increases as the horizontal position increases, as shown in the sketch. This equation also shows that the vertical position of the box increases with time at a rate of 1 m/s^2, which is the value used for the upward acceleration of the box.
For more questions like Vertical click the link below:
https://brainly.com/question/14727430
#SPJ4
Fill in the missing word in this sentence. Changes in volume and density cause a gas in the atmosphere to rise as it is heated, and as a gas rises, its temperature __________.
Changes in volume and density cause a gas in the atmosphere to rise as it is heated, and as a gas rises, its temperature decreases.
What is volume and density about?As a gas is heated, the molecules that make up the gas gain energy and begin to move faster. As the molecules move faster, they collide with each other more frequently and with greater force, causing the gas to expand and its volume to increase.
As the gas expands, its density decreases, and its buoyancy increases, making it less dense than the surrounding air. When a gas is less dense than the surrounding air, it tends to rise, which is known as convection.
Therefore, As a gas rises, it experiences a decrease in temperature, this is due to the decrease in atmospheric pressure. When a gas rises, the pressure on it decreases, which causes the gas to cool down.
Learn more about density from
https://brainly.com/question/1354972
#SPJ1
Block a, with a mass of 4 kg, is moving with a speed of 2. 0 m/s while block b, with a mass of 8 kg, is moving in the opposite direction with a speed of 3 m/s. The center of mass of the two block-system is moving with a velocity of:.
The center of the mass of the block-system is moving with a velocity of 1.3 meters per second in the same direction as B.
In this case, we are provided with:
The mass of block A (M1) = 4 kg
The speed of block A (V1) = 2.0 meters per second
The mass of block B (M2) = 8 kg
The speed of block B (V2) = 3.0 meters per second
Consider that block A is moving in a positive direction while block B moving the opposite way.
To find the velocity of the center of the mass of the two block system, we can use this following formula:
[tex]V = \frac{M1V1 + M2V2}{M1+M2}[/tex]
To find the answer, simply plug in all of the information that you already have into the equation:
[tex]V = \frac{(4 kg) (2m/s) + (8kg) (-3m/s)}{4 kg + 8 kg}[/tex]
V = -1.3 m/s
Because the sign is negative, we may deduce that the center of mass of the two-block system is traveling in the same direction as B at a speed of 1.3 m/s.
To learn more about velocity, click here:
https://brainly.com/question/2594502
#SPJ4
The Ingenuity Mars helicopter (above) has a mass of 1.8kg. and climbs to a height of 75m. This decreases the chemical store in its battery by 500J. What is the gravitational field strength g on Mars?
Answer:
3.7 m/s^2
Explanation:
Lets start by calculating the gain in potential energy when the Ingenuity rises to 75 meters from Mars' surface. It has a mass of 1.8kg. The potential energy is given by PE = mgh, where m is mass, g is the acceleration due to Mars' gravity, and h is height, in meters.
PE = (1.8kg)(75 meters)(g)
PE = (135 kg*m)*g
This required 500J of energy from the battery. 1 Joule = 1 kg*m^2/s^2
That means the PE gain is equal to 500 kg*m^2/s^2.
Set this equal to the PE we first calculated:
500 kg*m^2/s^2 = (135 kg*m)*g
g = (500 kg*m^2/s^2)/(135 kg*m)
g = 3.7 m/s^2
The published value is 3.721 m/s^2
Answer:
Approximately [tex]3.7\; {\rm N\cdot kg^{-1}}[/tex] assuming that the energy from the battery was entirely converted into gravitational potential energy.
Explanation:
Near the surface of a planet, the gravitational field is approximately uniform. Let [tex]g[/tex] denote the gravitational field strength. When an object of mass [tex]m[/tex] is lifted up and its height increases by [tex]\Delta h[/tex], the gravitational potential energy (GPE) of this object would have increased by [tex]m\, g\, \Delta h[/tex].
Under the assumptions, the gravitational potential energy of this helicopter would have increased by [tex]500\; {\rm J}[/tex]. In other words:
[tex]\begin{aligned}& m\, g\, \Delta h = (\text{change in GPE}) = 500\; {\rm J}\end{aligned}[/tex].
It is given that [tex]m = 1.8\; {\rm kg}[/tex] and [tex]\Delta h = 75\; {\rm m}[/tex]. Rearrange the equation above to find gravitational field strength [tex]g[/tex]:
[tex]\begin{aligned}g &= \frac{(\text{change in GPE})}{m\, \Delta h} \\ &= \frac{(500\; {\rm J}))}{(1.8\; {\rm kg})\, (75\; {\rm m})} \approx 3.7\; {\rm N\cdot kg^{-1}}\end{aligned}[/tex].
The sum is nearly 93 million miles away from the earth . How is light from the sun able to travel this large distance and still reach our planet
Explanation:
light takes 8 seconds to travel from the sun to earth this is because light travels at 671 million miles an hour
An atom that contains 6 protons 6 neutrons and 6 electrons has a mass of approximately.
The mass of an atom that have six protons; six neutrons; and six electron is 12. The mass of an atom is the total of its protons and neutron
What is protons, neutrons and electrons?Atom is the smallest structure of the chemical element. Atom contain protons, neutrons and electrons. Protons is a subatomic that contains positive electric charge where the electrons is a subatomic that contains negative electric charge or the opposite of the protons. Neutrons is a subatomic that contain no electric charge. The mass number of an atom is formulated as mass number = protons + neutrons. Hence:
mass number = protons + neutrons.
mass number = 6 + 6
mass number = 12
Learn more about atom here
https://brainly.com/question/17545314
#SPJ4
If a van traveled 225 miles in 5 hours, how far could the van travel in 7 hours?.
If a van traveled 225 miles in 5 hours, then the van could travel 315 miles in 7 hours.
What is mile?A mile is a unit of length in the imperial and United States customary systems of measurement. One mile is equal to 5,280 feet, 1,760 yards, or 1.609 kilometers. The word mile is derived from the Latin mille passus, meaning "a thousand paces." The mile was historically used as a unit of measurement for roads, and was once considered a basic unit of measurement in many countries, although usage has changed over time.
To determine how far a van could travel in 7 hours, you would need to know its average speed. If the van traveled 225 miles in 5 hours, you can calculate its average speed by dividing the distance traveled by the time it took to travel that distance:
225 miles / 5 hours = 45 miles per hour
Once you know the average speed of the van, you can calculate how far it could travel in 7 hours by multiplying the speed by the time:
45 miles per hour x 7 hours = 315 miles
So the van could travel 315 miles in 7 hours.
To learn more about Mile visit:
brainly.com/question/24421917
#SPJ4
balance a table tennis ball on the edge of a ruler. what happened ?
When trying to balance a tennis ball on the edge of a ruler, the ball can only balance when the balance point of the ball is determined.
What is the balance point of an object?The balance point of an object such as a tennis ball is the point where the object balances.
Even though an object's weight exerts downward pressure on each of its constituent parts, it is typically thought of as exerting a single force through the object's center of gravity or balance point.
The object's geometric center serves as its balancing point if its weight is spread evenly throughout it.
Learn more about balance point at: https://brainly.com/question/11904811
#SPJ1
The driver of a car travels 150 miles to reach his destination. If he travels 60. 0 mi/h for 100 miles and 55. 0 mi/h for the remaining 50. 0 miles, what was his average velocity for the trip?.
The average velocity of that driver is 58 mi/h.
How to find the average velocity for that driver?As per data given:
first velocity (V1) = 60 mi/h
first distance (s1) = 100 miles
second velocity (V2) = 55 mi/h
second distance (s2) = 50 miles
First, we have to find the time spend that driven in first 100 miles by calculate it as follow:
V1 = s1 : t1
60 = 100 : t1
t1 = [tex]\frac{10}{6}[/tex] h
Then calculate the second condition in 50 miles:
V2 = s2 : t2
55 = 50 : t2
t2 = [tex]\frac{10}{11}[/tex] h
then calculate the average velocity:
Average velocity = total distance / total time
Average velocity = 150 : ([tex]\frac{10}{6}[/tex] + [tex]\frac{10}{11}[/tex] )
Average velocity = 58.2352941176
Let round the value to 58 mi/h. Hence, the average velocity of the driver is 58 mi/h
Learn more about velocity here
https://brainly.com/question/25905661
#SPJ4
ence 2nd Quarter
Dominic made the table below to organize his notes about mixtures.
Properties of Mixtures
has no set composition
must have more than one state of matter
must have more than one substance
What mistake did Dominic make?
The title should read "Properties of Solutions" because some mixtures do not have all of the properties listed.
There is a definite recipe to make each mixture, so the composition of a mixture is set.
O Although it is possible to have more than one state, it is also possible to have only one state.
5
A single substance can be used to make a mixture if the substance is composed of more than one element.
Save and Exit
30.30
Next
Submit
Although having multiple states is conceivable, it's also feasible to have just one.
Is it possible if it is feasible?This discrepancy is expressed by the phrases attainable and feasible, which are used in certain definitions of these synonyms. As is frequently the case, the Latin-derived phrase is utilized when technical specificity, distance, and an element of abstraction are required.
What does a project's viability mean?Project feasibility refers to the examination of a project's numerous components to ascertain whether it has the potential to succeed. Before a project starts, a business might assess its viability to spot challenges, develop plans to address them, and eventually draw in investors.
To know more about feasible visit:
https://brainly.com/question/9422458
#SPJ1