Consider the following competing hypotheses and accompanying sample data drawn independently from normally distributed populations. Use Table 1.H0: μ1 − μ2 = 0HA: μ1 − μ2 ≠ 0x−1x−1 = 57 x−2x−2 = 63σ1 = 11.5 σ2 = 15.2n1 = 20 n2 = 20a-1. Calculate the value of the test statistic. (Negative values should be indicated by a minus sign. Round all intermediate calculations to at least 4 decimal places and final answer to 2 decimal places.)Test statistic a-2. Approximate the p-value.p-value < 0.010.01 ≤ p-value < 0.0250.025 ≤ p-value < 0.050.05 ≤ p-value < 0.10p-value ≥ 0.10a-3. Do you reject the null hypothesis at the 5% level?Yes, since the p-value is less than α.No, since the p-value is less than α.Yes, since the p-value is more than α.No, since the p-value is more than α.b. Using the critical value approach, can we reject the null hypothesis at the 5% level?No, since the value of the test statistic is not less than the critical value of -1.645.No, since the value of the test statistic is not less than the critical value of -1.96.Yes, since the value of the test statistic is not less than the critical value of -1.645.Yes, since the value of the test statistic is not less than the critical value of -1.96.

The area of the enclosed loop of the curve y^2 = x^2(x 3) is 56√3/15.

To find the area of the enclosed loop of the curve y^2 = x^2(x 3), we need to first sketch the curve to see what it looks like. The equation can be rewritten as y^2 = x^2(x-3), which means that the curve is symmetric about the x-axis and passes through the origin.

Next, we can find the x-intercepts of the curve by setting y=0: 0^2 = x^2(x-3), which simplifies to x=0 and x=3. So the curve intersects the x-axis at (0,0) and (3,0).

To find the area of the enclosed loop, we need to integrate the curve from x=0 to x=3 and subtract the area below the x-axis. We can do this by setting up the integral as follows:

A = ∫[0,3] y dx - ∫[0,3] -y dx

We can solve for y by taking the square root of both sides of the equation y^2 = x^2(x-3):

y = ± x√(x-3)

To find the bounds of the integral, we can set the two functions equal to each other and solve for x:

x√(x-3) = -x√(x-3)
x=0 or x=3

So our integral becomes:

A = ∫[0,3] x√(x-3) dx - ∫[0,3] -x√(x-3) dx

We can simplify the integral by making the substitution u = x-3, which gives us:

A = ∫[0,3] (u+3)√u du - ∫[0,3] -(u+3)√u du

Simplifying further, we get:

A = 2∫[0,3] (u+3)√u du

This integral can be evaluated using integration by parts, which gives us:

A = 2/3 [2(u+3)(2u+3)√u - ∫(2u+3)√u du] from 0 to 3

Simplifying, we get:

A = 2/3 [(54√3/5) - (2/5)(18√3) + (2/3)(4√3)]

A = 56√3/15 DETAIL ANS

Therefore, the area of the enclosed loop of the curve y^2 = x^2(x 3) is 56√3/15.

Learn more about enclosed loop of the curve

brainly.com/question/30174664

#SPJ11

a) The moment generating function[tex](mgf)[/tex] of U is M(t) = exp((λ1+λ2)(e^t-1)) b) U follows a named distribution known as Poisson distribution with parameter λ1+λ2. c) The [tex]pmf[/tex]of (Y1|U = u) is a binomial distribution with parameters u and λ1/(λ1+λ2).

a) The[tex]mgf[/tex]of U can be found using the fact that the [tex]mgf[/tex]of the sum of independent random variables is the product of their individual [tex]mgfs[/tex]. Thus,

M(t) = E[tex][e^(tU)][/tex] = E[e^(t(Y1+Y2))] = E[e^(tY1)]E[e^(tY2)] = exp(λ1(e^t-1))[tex]exp(λ2(e^t-1)) = exp((λ1+λ2)).[/tex]

b) The sum of independent Poisson random variables is a Poisson distribution with parameter equal to the sum of the individual parameters. Therefore, U follows a Poisson distribution with parameter λ1+λ2.

c) To find the[tex]pmf[/tex]of (Y1|U = u), we use Bayes' theorem:

P(Y1=[tex]k|U=u) = P(Y1=k, Y2=u-k)/P(U=u)[/tex]

= [tex]P(Y1=k)P(Y2=u-k)/(λ1+λ2)^u e^-(λ1+λ2)\\= (λ1^k/k!)(λ2^(u-k)/(u-k)!) / (λ1+λ2)^u e^-(λ1+λ2)[/tex]

This simplifies to a binomial distribution with parameters u and p=λ1/(λ1+λ2), as the probability of success (i.e., Y1=k) is p and the number of trials is u. Thus, the [tex]pmf[/tex] of (Y1|U = u) is a binomial distribution with parameters u and λ1/(λ1+λ2).

Learn more about binomial distribution here:

https://brainly.com/question/29137961

#SPJ11

The equation Square root of 5 square root of 5 = x can be simplified as follows:

√5 ·√5 = x

√(5·5) = x

√25 = x

x = 5

Therefore, the value of x that will make the equation true is 5.

The number of students earning higher than 60% is 2

The math grades received by the group of five students are: 80, 45, 30, 93, and 49.

In order to approximate the quantity of students who attained marks above 60%, it is necessary to ascertain the count of students who were graded above 60 out of a total of 100.

Based on the grades, it can be determined that three students attained below 60 points: specifically, 45, 30, and 49. This signifies that a couple of pupils achieved a grade that exceeded 60.

Thus, with the information provided, it can be inferred that roughly two pupils achieved a score above 60% in mathematics.

Learn more about estimation at: https://brainly.com/question/28416295

#SPJ4

Answer:

0.67

Step-by-step explanation:

The approximated solution for the initial-value problem, using Taylor's method of order two with h = 0.5, is y ≈ 3 at t = 3.

Taylor's method of order two approximates the solution of an initial-value problem by using the Taylor series expansion up to the second order. In this case, we have the initial-value problem y' = 1 + (t - y)^2, with the initial condition y(2) = 1, and the step size h = 0.5.

To apply Taylor's method of order two, we first expand the function y(t) around the initial point (t0, y0) using the Taylor series:

y(t + h) = y(t) + hy'(t) + (h^2/2)y''(t) + O(h^3),

where O(h^3) represents higher-order terms that are neglected for this approximation.

Differentiating the given function, we find y' = 1 + (t - y)^2. Evaluating y'(t0, y0) at t0 = 2 and y0 = 1, we get y'(2, 1) = 1 + (2 - 1)^2 = 2.

Substituting the values into the iterative formula, we obtain:

y(t + h) = y(t) + hy'(t) = y(t) + 0.5(2),

where t ranges from 2 to 3 with steps of 0.5. Starting with y(2) = 1, we can update the value of y at each time step:

For t = 2.5: y(2.5) = y(2) + 0.5(2) = 1 + 1 = 2.

For t = 3: y(3) = y(2.5) + 0.5(2) = 2 + 1 = 3.

Therefore, the approximated solution for the initial-value problem, using Taylor's method of order two with h = 0.5, is y ≈ 3 at t = 3.

To learn more about Taylor's method click here, brainly.com/question/29108771

#SPJ11

To apply the Alternating Series Test, we need to check two conditions:

The terms of the series must alternate in sign.

The absolute values of the terms must decrease as n increases.

Let's analyze the given series: ∑ (-1)^n (n - 6) from n = 7 to infinity.

Alternating Signs: The series has alternating signs because of the (-1)^n term. When n is even, (-1)^n becomes positive, and when n is odd, (-1)^n becomes negative.

Decreasing Absolute Values: Let's examine the absolute values of the terms: |(-1)^n (n - 6)| = |n - 6|.

As n increases, the absolute value |n - 6| also increases. Therefore, the absolute values of the terms do not decrease.

Since the terms do not meet the decreasing absolute values condition, we cannot conclude convergence or divergence using the Alternating Series Test. The Alternating Series Test does not apply in this case.

To determine the convergence or divergence of the series, we need to use other convergence tests, such as the Ratio Test or the Comparison Test.

Learn more about divergence here: brainly.com/question/32386596

#SPJ11

Answer:

n

Step-by-step explanation:

Height of hawk eye at a distance of 660 feet from tree is 462.1 feet .

Given,

An observer (O) is located 660 feet from a tree (T). The observer

notices a hawk (H) flying at a 35° angle of elevation from his line of sight.

Here,

Let x be the height of the hawk.

The tangent ratio expresses the relationship between the sides of a right triangle depicted above as:

tanФ = opposite side/adjacent side

tan35° = x / 660

x = 660 (tan35° )

x = 462.1 feet .

Thus the height of hawk eye is 462.1 feet .

Know more about angle of elevation,

https://brainly.com/question/29008290

#SPJ12

The exponential function for the table is given as follows:

[tex]y = 0.02(4)^x[/tex]

The simple radical form of the expression is given as follows:

[tex]\sqrt{8} = 2\sqrt{2}[/tex]

An exponential function has the definition presented as follows:

[tex]y = ab^x[/tex]

In which the parameters are given as follows:

The parameter values for the exponential function in this problem are given as follows:

Hence the exponential function for the table is given as follows:

[tex]y = 0.02(4)^x[/tex]

For the simple radical form, we have that 8 = 2 x 4, hence:

[tex]\sqrt{8} = \sqrt{4 \times 2} = 2\sqrt{2}[/tex]

More can be learned about exponential functions at brainly.com/question/2456547

#SPJ1

The given series ∑=3[infinity]710 is a geometric series with the first term a=3 and the common ratio r=7/10. Therefore, the sum of the given geometric series is 10, and the series is convergent.

To determine whether the series converges or diverges, we can apply the formula for the sum of an infinite geometric series, which is S = a / (1 - r). Plugging in the values for a and r, we get:

S = 3 / (1 - 7/10) = 3 / (3/10) = 10

Therefore, the sum of the infinite geometric series is 10. This means that as we add up more and more terms of the series, the sum gets closer and closer to 10. In other words, the series converges to a finite value of 10.

In conclusion, the sum of the given geometric series is 10, and the series is convergent.

To learn more about “geometric series” refer to the https://brainly.com/question/24643676

#SPJ11

To find out whether Mia has enough fabric to make the dress, you need to add the amount of fabric required for the top and skirt. Then compare it with the amount of fabric she has.

So, let's do that.To make the dress, we need 11/8 yards of fabric for the top2 5/8 yards of fabric for the skirt Total fabric required

= 1 1/8 + 2 5/8

= 3 3/4 yards

Mia has 3 1/2 yards of fabric

So, Mia does not have enough fabric to make the dress because she needs 3 3/4 yards of fabric to make it.

To know more about yards visit :-

https://brainly.com/question/24487155

#SPJ11

The perimeter of △XYZ is 54 cm.

To find the perimeter of △XYZ given that △ABC∼△XYZ with side lengths AB=18 cm, BC=30 cm, and CA=42 cm, and the longest side of △XYZ is 25.2 cm, follow these steps:

1. Identify the longest side of △ABC. In this case, it is CA with a length of 42 cm.
2. Calculate the scale factor by dividing the longest side of △XYZ (25.2 cm) by the longest side of △ABC (42 cm): 25.2 / 42 = 0.6.
3. Find the corresponding side lengths of △XYZ by multiplying the side lengths of △ABC by the scale factor (0.6):
  - XY (corresponding to AB): 18 * 0.6 = 10.8 cm
  - YZ (corresponding to BC): 30 * 0.6 = 18 cm
  - XZ (corresponding to CA): 42 * 0.6 = 25.2 cm (already given)
Calculate the perimeter of △XYZ by adding the side lengths: 10.8 + 18 + 25.2 = 54 cm.

The perimeter of △XYZ is 54 cm.

Learn more about perimeter

brainly.com/question/6465134

#SPJ11

Answer:

This series diverges--compare it to the harmonic series.

The radius of convergence is r = 6.

To find the radius of convergence, we use the ratio test:

r = lim |an / an+1|

where an = (-1)^n n^3 x^n / 6^n

an+1 = (-1)^(n+1) (n+1)^3 x^(n+1) / 6^(n+1)

Thus, we have:

|an+1 / an| = [(n+1)^3 / n^3] |x| / 6

Taking the limit as n approaches infinity, we get:

r = lim |an / an+1| = lim [(n^3 / (n+1)^3) 6 / |x|]

= lim [(1 + 1/n)^(-3) * 6/|x|]

= 6/|x|

Therefore, the radius of convergence is r = 6.

Learn more about a radius of convergence

brainly.com/question/31789859

#SPJ11

The statement that identifies and explains lim x f(x) is "The limit lim f(x) does not exist because there is oscillating behavior around x = 0."In general, a function f(x) has a limit at x = c if and only if the function approaches the same value L no matter what direction x comes from.

A limit can be determined by evaluating the function at x values very close to c, either from the right or from the left. If both the left-hand and right-hand limits exist and are equal, then the function has a limit at x = c. However, if the left-hand and right-hand limits do not exist or are not equal, then the function does not have a limit at x = c.In this case, the statement "The limit lim f(x) does not exist because there is oscillating behavior around x = 0" identifies and explains lim x f(x).

This is because the graph has oscillating behavior as x approaches 0, and the left-hand and right-hand limits do not exist or are not equal.

Therefore, lim x f(x) does not exist.

The other statements are not correct because they do not accurately describe the behavior of the function near x = 0.

To know more about oscillating visit:

https://brainly.com/question/30111348

#SPJ11

For the sample population

(a) The point estimate of p is 0.71.

(b) Using Equation 73-2, the approximate 90% confidence interval for p is obtained by calculating 0.71 ± 1.645 * sqrt((0.71 * (1 - 0.71))/200).

(c) Using Equation 73-4, the approximate 90% interval for p is found by calculating 0.71 ± 1.645 * sqrt((0.71 * (1 - 0.71))/(200 - 1)).

(d) Using Equation 73-5, the approximate 90% confidence interval for p is obtained by calculating 0.71 ± 1.645 * sqrt((0.71 * (1 - 0.71))/(200 + 1.645^2/4)).

(a) To obtain a point estimate of p, we divide the number of letters delivered the next day (y = 142) by the sample size (n = 200):

Point estimate of p = y/n = 142/200 = 0.71

(b) Using Equation 73-2, we can find an approximate 90% confidence interval for p. The formula is given by:

Point estimate ± Z * sqrt((p * (1 - p))/n)

Since the confidence level is 90%, the Z-value for a 90% confidence level is approximately 1.645. Substituting the values into the equation:

Confidence interval = 0.71 ± 1.645 * sqrt((0.71 * (1 - 0.71))/200)

Simplifying the expression:

Confidence interval = 0.71 ± 1.645 * sqrt(0.21/200)

(c) Using Equation 73-4, we can find an approximate 90% interval for p. The formula is given by:

Point estimate ± Z * sqrt((p * (1 - p))/(n - 1))

Applying the formula with the given values:

Confidence interval = 0.71 ± 1.645 * sqrt((0.71 * (1 - 0.71))/(200 - 1))

Simplifying the expression:

Confidence interval = 0.71 ± 1.645 * sqrt(0.21/199)

(d) Using Equation 73-5, we can find an approximate 90% confidence interval for p. The formula is given by:

Point estimate ± Z * sqrt((p * (1 - p))/(n + Z^2/4))

Substituting the values into the equation:

Confidence interval = 0.71 ± 1.645 * sqrt((0.71 * (1 - 0.71))/(200 + 1.645^2/4))

Simplifying the expression:

Confidence interval = 0.71 ± 1.645 * sqrt(0.21/200.5084)

To know more about sample proportion refer here:

https://brainly.com/question/29912751

#SPJ11

the 4th partial sum of the series is approximately 1.4236.

The general term of the series is given by an = n^(-2), for n >= 1.

Therefore, the first four terms are:

a1 = 1^(-2) = 1

a2 = 2^(-2) = 1/4

a3 = 3^(-2) = 1/9

a4 = 4^(-2) = 1/16

The 4th partial sum, s4, is given by:

s4 = a1 + a2 + a3 + a4 = 1 + 1/4 + 1/9 + 1/16 ≈ 1.4236

what is series?

In mathematics, a series is the sum of the terms of a sequence of numbers. It is the result of adding the terms of a sequence and is written using sigma notation as Σan, where n ranges from 1 to infinity and an is the nth term of the sequence.

To learn more about series visit:

brainly.com/question/15415793

#SPJ11

The radius, r, of the larger cone is equal to 24 mm.

In Mathematics and Geometry, the volume of a cone can be calculated by using this formula:

Volume of cone, V = 1/3 × πr²h

Where:

Since both the large and small cones are similar, we can logically deduce the following proportion based on their side lengths;

19,008/704 = (r/8)³

19,008/704 = r³/512

r³ = 19,008/704 × 512

Radius of larger cone = 24 mm.

Read more on cone here: https://brainly.com/question/27604827

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

The solutions to the original equation in the interval [0, 2π) are:

θ = 0, π/2, π, 3π/2, π/8, 3π/8.

We have,

Double-angle formula for sine: sin(2θ) = 2 sin(θ) cos(θ)

Double-angle formula for cosine: cos(2θ) = 2cos²(θ) - 1

Let's substitute these double-angle formulas into the equation:

−sin(2θ) − cos(4θ) = 0

−(2 sin(θ)cos(θ)) − (2cos²(2θ) - 1) = 0

2 sin(θ)cos(θ) + 2cos²(2θ) - 1 = 0

And,

cos(4θ) = 2 cos² (2θ) - 1

Now the equation becomes:

2 sin(θ) cos(θ) + cos(4θ) = 0

Now, factor out a common term:

cos(4θ) + 2 sin(θ) cos(θ) = 0

To solve for θ, each term to zero:

cos(4θ) = 0

2 sin(θ) cos(θ) = 0

Solving for θ:

cos(4θ) = 0

4θ = π/2, 3π/2 (adding 2π to get solutions in the interval [0, 2π))

θ = π/8, 3π/8

And,

2 sin(θ) cos(θ) = 0

This equation has two possibilities:

sin(θ) = 0

cos(θ) = 0

For sin(θ) = 0, the solutions are θ = 0, π (within the interval [0, 2π)).

For cos(θ) = 0, the solutions are θ = π/2, 3π/2 (within the interval [0, 2π)).

Thus,

The solutions to the original equation in the interval [0, 2π) are:

θ = 0, π/2, π, 3π/2, π/8, 3π/8.

Learn more about the Half-Angle formula here:

https://brainly.com/question/30400810

#SPJ12

We can use the power series expansion of the exponential function e^(-x) to evaluate the sum of the series:

e^(-x) = ∑(n=0 to infinity) (-1)^n (x^n) / n!

Setting x = 3/2, we get:

e^(-3/2) = ∑(n=0 to infinity) (-1)^n (3/2)^n / n!

Multiplying both sides by (3/2)^2 and simplifying, we get:

(9/4) e^(-3/2) = ∑(n=0 to infinity) (-1)^n (3/2)^(n+2) / (n+2)!

Comparing this with the given series, we can see that they differ only by a factor of (-1) and a shift in the index of summation. Therefore, we can write:

∑(n=0 to infinity) (-1)^n (2n) (3/2)^(2n) / (2n)!

= (-1) ∑(n=0 to infinity) (-1)^n (3/2)^(n+2) / (n+2)!

= (-1) ((9/4) e^(-3/2))

= - (9/4) e^(-3/2)

Hence, the sum of the series is - (9/4) e^(-3/2).

To know more about the series refer here

https://brainly.com/question/24237186

SPJ11

The bit-file necessary to program an FPGA to implement this function would depend on the specific FPGA and toolchain being used, but it would typically include a configuration bitstream that specifies the LUT programming values and the multiplexer configurations for each CLB in the design. The bitstream would also include the memory initialization values for the 8x2 memory.

CLBs (Configurable Logic Blocks) are a fundamental building block of FPGAs (Field-Programmable Gate Arrays). They typically consist of a configurable logic function implemented using LUTs (Look-Up Tables), along with a set of programmable multiplexers that can be used to connect inputs and outputs to the logic function.

To implement the function F(a,b,c,d) = ab + cd using CLBs with an 8x2 memory, we can use the following circuit:

           +------+

    a ---->|      |

           |  LUT |

    b ---->|      |---->+

           +------+     |

                        |

           +------+     |

    c ---->|      |     |

           |  LUT |     |

    d ---->|      |-----+

           +------+

Here, each input (a,b,c,d) is connected to a separate LUT input, and the LUT is programmed to implement the desired function F. The output of the LUT is connected to a multiplexer, which can be used to select between the LUT output and an 8x2 memory output. The memory has 8 address lines and 2 data lines, which can be used to store two bits for each of the possible input combinations of a,b,c,d.

for such more question on Configurable Logic Blocks

https://brainly.com/question/24953880

#SPJ11

The function F(a,b,c,d) = ab + cd can be implemented using a 2-input LUT, an 8x2 memory, and a switching matrix in a configurable logic block (CLB) of an FPGA. The bit-file necessary to program the FPGA to implement this function would involve defining the input and output pins, initializing the LUT and memory with the required values, and configuring the switching matrix to connect the inputs and outputs appropriately.

A configurable logic block (CLB) is a basic building block of an FPGA that can be programmed to implement any digital logic function. Each CLB typically consists of a number of components, including a 2-input look-up table (LUT), a flip-flop, and a switching matrix that connects the various inputs and outputs. In order to implement the function F(a,b,c,d) = ab + cd using a CLB, we would need to use the LUT to compute the product terms ab and cd, and then use the memory to store the results.

The switching matrix would be used to connect the external inputs a, b, c, and d to the appropriate inputs of the LUT and memory, and to connect the outputs of the LUT and memory to the output pin of the CLB. The bit-file necessary to program the FPGA to implement this function would therefore involve defining the input and output pins, initializing the LUT and memory with the required values, and configuring the switching matrix to connect the inputs and outputs appropriately.

To initialize the LUT with the required values, we would need to program it with the truth table for the function F(a,b,c,d). Since this function has four inputs, there are 2^4 = 16 possible input combinations, and the corresponding output values can be computed using the formula F(a,b,c,d) = ab + cd. We would need to program the LUT with these 16 output values, so that it can compute the function for any input combination.

The 8x2 memory would be used to store the intermediate results ab and cd, which can then be combined using a second LUT to compute the final output of the function. The switching matrix would be used to connect the inputs a, b, c, and d to the appropriate inputs of the LUT and memory, and to connect the outputs of the LUT and memory to the output pin of the CLB. By configuring the switching matrix appropriately, we can ensure that the correct inputs are connected to the correct components, and that the final output of the function is sent to the correct output pin of the FPGA.


To learn more about matrix click here: brainly.com/question/29132693
#SPJ11

The given series is divergent.

To determine whether the series converges or diverges, we can use the divergence test, which states that if the limit of the nth term of a series does not approach zero as n approaches infinity.

Then the series must diverge.

Let's find the limit of the nth term of the given series:

lim n → ∞ n^2 / (4n^3 - 3n)

= lim n → ∞ n^2 / n^3 (4 - 3/n^2)

= lim n → ∞ 1/n (4/3 - 3/n^2)

As n approaches infinity, the second term approaches zero, and the limit becomes:

lim n → ∞ 1/n * 4/3 = 0

Since the limit of the nth term approaches zero, the divergence test is inconclusive. Therefore, we need to use another test to determine whether the series converges or diverges.

We can use the limit comparison test, which states that if the ratio of the nth term of a series to the nth term of a known convergent series approaches a nonzero constant as n approaches infinity.

Then the two series must either both converge or both diverge.

Let's compare the given series to the p-series with p = 3:

∑ n = 1 ∞ 1/n^3

We have:

lim n → ∞ (n^2 / (4n^3 - 3n)) / (1/n^3)

= lim n → ∞ n^5 / (4n^3 - 3n)

= lim n → ∞ n^2 / (4 - 3/n^2)

= 4/1 > 0

Since the limit is a nonzero constant, the two series either both converge or both diverge. We know that the p-series with p = 3 converges, therefore, the given series must also converge.

The correct series should be:

∑ n = 1 ∞ n / (4n^3 - 3)

Using the same tests as above, we can show that this series is divergent. The limit of the nth term approaches zero, and the limit comparison test with the p-series with p = 3 gives a nonzero constant:

lim n → ∞ (n / (4n^3 - 3)) / (1/n^3)

= lim n → ∞ n^4 / (4n^3 - 3)

= lim n → ∞ n / (4 - 3/n^4)

= ∞

Therefore, the given series is divergent.

Learn more about divergence test

brainly.com/question/30098029

#SPJ11

Answer:

Step-by-step explanation:

To find the value of y when x = 3 in the equation y = -2x + 15, we substitute x = 3 into the equation and solve for y:

y = -2(3) + 15

y = -6 + 15

y = 9

Therefore, when x = 3, y = 9.

(1) To find (f ο g ο h)(-2), we first need to find g ο h and then apply f to the result. We have:

g ο h(x) = g(h(x)) = g(2x) = (2x)^2 = 4x^2

So, (f ο g ο h)(-2) = f(g(h(-2))) = f(g(-4)) = f(16) = 3(16) + 1 = 49

Therefore, (f ο g ο h)(-2) = 49.

(2) To find (f o f^-1)(2/3), we need to use the fact that f and f^-1 are inverse functions, which means that f(f^-1(x)) = x for all x in the domain of f^-1. Therefore, we have:

f(f^-1(x)) = 3f^-1(x) + 1 = x

Solving for f^-1(x), we get:

f^-1(x) = (x - 1)/3

So, (f o f^-1)(2/3) = f(f^-1(2/3)) = f((2/3 - 1)/3) = f(-1/9) = 3(-1/9) + 1 = 2/3

Therefore, (f o f^-1)(2/3) = 2/3.

To know more about domain of real number , refer here :

https://brainly.com/question/31340259#
#SPJ11

Adler and Erika solved the same equation. The solution to the equation was found using the calculations below. Adler's Work Erika's Work Start Fraction 13 over 8 End Fraction = k one-half. Start Fraction 13 over 8 End Fraction minus one-half = k one-half minus one-half.

Start Fraction 9 over 8 End Fraction = k. Start Fraction 13 over 8 End Fraction = k one-half. Start Fraction 13 over 8 End Fraction (negative one-half) = k one-half (negative one-half).Start Fraction 9 over 8 End Fraction = k. Both Adler and Erika solved for k correctly because either the addition property of equality or the subtraction property of equality can be used to solve for k, is the correct answer about their work. Let's prove it, we know that if a = b, then we can subtract the same value from each side of the equation to get a - c = b - c, which is the subtraction property of equality. We can add the same value to each side of an equation to get a + c = b + c, which is the addition property of equality.

Start Fraction 13 over 8 End Fraction minus one-half = k one-half minus one-half. So, Start Fraction 13 over 8 EndFraction minus one-half = Start Fraction 1 over 2 EndFraction k minus Start Fraction 1 over 2 End Fraction. Using the subtraction property of equality, we can say, Start Fraction 9 over 8 EndFraction = k. Therefore, Both Adler and Erika solved for k correctly because either the addition property of equality or the subtraction property of equality can be used to solve for k.

To know more about  Fraction visit:

brainly.com/question/20393250

#SPJ11

An equation to represent the number of cookies sold and profit earned is p = 0.25c.

In Mathematics and Geometry, a proportional relationship is a type of relationship that produces equivalent ratios and it can be modeled or represented by the following mathematical equation:

p = kc

Where:

Next, we would determine the constant of proportionality (k) by using the various data points from the graph as follows:

Constant of proportionality, k = p/c

Constant of proportionality, k = 0.25/1 = 0.5/2

Constant of proportionality, k = $0.25 per cookies.

Therefore, the required linear equation is given by;

p = kc

p = 0.25c

Read more on proportional relationship here: brainly.com/question/28350476

#SPJ4

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

a. the dot product of every pair of vectors is zero, the set of vectors is orthogonal. b. the set is not orthonormal. c. we cannot determine whether the set is a basis for Rn without knowing the dimension of Rn.

(a) To determine whether the set of vectors in Rn is orthogonal, we need to check if the dot product of every pair of vectors is zero.

Taking dot products:

(0, -1, 4) • (-1, 4, 1) = 0 + (-4) + 4 = 0

(0, -1, 4) • (-17, -4, -1) = 0 + 4 + (-4) = 0

(-1, 4, 1) • (-17, -4, -1) = 17 + (-16) + (-1) = 0

Since the dot product of every pair of vectors is zero, the set of vectors is orthogonal.

(b) To determine whether the set is also orthonormal, we need to check if each vector has length 1.

Calculating the length of each vector:

|| (0, -1, 4) || = sqrt(0^2 + (-1)^2 + 4^2) = sqrt(17)

|| (-1, 4, 1) || = sqrt((-1)^2 + 4^2 + 1^2) = sqrt(18)

|| (-17, -4, -1) || = sqrt((-17)^2 + (-4)^2 + (-1)^2) = sqrt(292)

Since none of the vectors have length 1, the set is not orthonormal.

(c) Since the set is orthogonal and has three vectors in Rn, it is a basis for Rn if and only if n = 3. Therefore, we cannot determine whether the set is a basis for Rn without knowing the dimension of Rn.

Learn more about orthogonal here

https://brainly.com/question/30772550

#SPJ11

An absolute value function with a vertex (3, 7) is f(x)=|x-3|+7.

Given that, an absolute value function with a vertex (3, 7).

An absolute value function is an important function in algebra that consists of the variable in the absolute value bars. The general form of the absolute value function is f(x) = a |x - h| + k and the most commonly used form of this function is f(x) = |x|, where a = 1 and h = k = 0. The range of this function f(x) = |x| is always non-negative and on expanding the absolute value function f(x) = |x|, we can write it as x, if x ≥ 0 and -x, if x < 0.

Here, f(x)=|x-3|+7

Therefore, an absolute value function with a vertex (3, 7) is f(x)=|x-3|+7.

To learn more about a absolute value equation visit:

https://brainly.com/question/2166748.

#SPJ1