Consider the reduction of the rectangle. A large rectangle has a length of 16. 8 feet and width of 2. 3 feet. A smaller rectangle has a length of 4. 5 feet and width of x feet. Not drawn to scale Rounded to the nearest tenth, what is the value of x? 0. 1 feet 0. 6 feet 1. 6 feet 2. 0 feet.

Answer:

This function has a horizontal asymptote at y=0, a vertical asymptote at x=-1, and a hole at (1,2).

Step-by-step explanation:

A rational equation with the given requirements can be written in the form:

f(x) = (x - 1) / [(x + 1)g(x)]

where g(x) is a factor in the denominator that ensures the vertical asymptote at x=-1.

To meet the condition that y=0 is a horizontal asymptote, we need to ensure that the degree of the denominator is greater than or equal to the degree of the numerator.

To create a hole at (1,2), we need to ensure that the factor (x-1) appears in both the numerator and the denominator, so that they cancel each other out at x=1.

One possible function that meets all of these requirements is:

f(x) = (x - 1) / [(x + 1)(x - 1)]

Simplifying this function, we get:

f(x) = 1 / (x + 1)

This function has a horizontal asymptote at y=0, a vertical asymptote at x=-1, and a hole at (1,2).

To generate three integers with a range of 10 and a mean of 13, we can choose the numbers 11, 12, and 14.

The mean of a set of numbers is calculated by summing all the numbers in the set and dividing the total by the count of numbers. In this case, the mean is given as 13. To find the range, we subtract the smallest number from the largest number in the set. Here, we want the range to be 10.

To satisfy these conditions, we can start with the mean, which is 13. We can then choose two integers on either side of 13 that have a difference of 10. One possibility is to choose 11 and 15, as their difference is indeed 10. However, since we need the numbers to be under 25, we need to choose a smaller number on the upper side. Hence, we can select 14 instead of 15. Therefore, the three integers that meet the criteria are 11, 12, and 14. These numbers have a mean of 13, and their range is 10.

Learn more about range here:

https://brainly.com/question/29204101

#SPJ11

The equation of the plane that best fits the given data points is z =200/29 - 133/87x + 196/87y

To find the plane that best fits the given data points, we can use the method of least squares regression. We want to find a plane in the form z = a + bx + cy that minimizes the sum of the squared distances between the actual data points and the predicted values on the plane.

Let's denote the given data points as (x1, y1, z1), (x2, y2, z2), ..., (xn, yn, zn).

The equations for the given data points can be written as follows:

Equation 1: 1a + 0b - 3c = 0

Equation 2: 1a + 4b + 0c = 0

Equation 3: 1a + 3b - 1c = 1

Equation 4: 1a + 1b - 2c = 1

Equation 5: 1a - 1b - 5c = -3

We can express the system of equations in matrix form as AX = B, where:

A = [[1, 0, -3], [1, 4, 0], [1, 3, -1], [1, 1, -2], [1, -1, -5]]

X = [a, b, c]

B = [0, 0, 1, 1, -3]

To solve for X, we can use the least squares method:

X = [tex](A^T*A)^{-1}*A^T*B[/tex]

Let's perform the calculations:

Step 1: Calculate [tex]A^T[/tex] (transpose of A)

[tex]A^T[/tex] = [[1, 1, 1, 1, 1], [0, 4, 3, 1, -1], [-3, 0, -1, -2, -5]]

Step 2: Calculate [tex]A^T*A[/tex]

[tex]A^T*A[/tex] = [[5, 7, -11], [7, 27, 0], [-11, 0, 39]]

Step 3: Calculate [tex](A^T*A)^{-1[/tex] (inverse of A^T * A)

[tex](A^T*A)^{-1[/tex] = [[351/29, -91/29, 99/29], [-91/29, 74/87, -77/87], [99/29, -77/87, 86/87]]

Step 4: Calculate [tex]A^T*B[/tex]

[tex]A^T*B[/tex] = [[-1], [7], [12]]

Step 5: Calculate X

X = [tex](A^T*A)^{-1}*A^T*B[/tex]

 = [[351/29, -91/29, 99/29], [-91/29, 74/87, -77/87], [99/29, -77/87, 86/87]] * [[-1], [7], [12]]

 = [[200/29], [-133/87], [196/87]]

Therefore, the values of a, b, and c that define the plane are approximately:

a = 200/29

b = - 133/87

c= 196/87

The equation of the plane that best fits the given data points is:

z =200/29 - 133/87x + 196/87y

Learn more about Equation of Plane here

https://brainly.com/question/27190150

#SPJ4

Plan A lasts for 2 hours, and Plan B lasts for 1 hour.

Let's assume that Plan A lasts for "a" hours and Plan B lasts for "b" hours.

On Friday, there were 5 clients who did Plan A, so the total time spent on Plan A workouts is 5a hours. Similarly, for Plan B, with 6 clients, the total time spent on Plan B workouts is 6b hours. We know that the total training time on Friday was 12 hours, so we can create the equation:

5a + 6b = 12 (Equation 1)

On Saturday, there were 3 clients who did Plan A, so the total time spent on Plan A workouts is 3a hours. For Plan B, with 2 clients, the total time spent on Plan B workouts is 2b hours. The total training time on Saturday was 6 hours, so we can create the equation:

3a + 2b = 6 (Equation 2)

We now have a system of equations (Equation 1 and Equation 2) that we can solve to find the values of "a" and "b." Solving this system of equations yields the following results:

a = 2

b = 1

for more such questions on equation

https://brainly.com/question/22688504

#SPJ8

The series is divergent.

To determine the convergence or divergence of the series[tex][\infty] 3 (2n 5)3 n = 1[/tex] using the integral test, we need to evaluate the following integral:

∫[tex][\infty][/tex]1 3 (2x 5)3 dx

Let's calculate the integral:

∫[tex][\infty][/tex] 1 3 (2x 5)3 dx = ∫[tex][\infty][/tex] 1 24x3 dx

Integrating with respect to x:

= (24/4)x4 + C

= 6x4 + C

To evaluate this integral from 1 to infinity, we substitute the limits:

lim[x→∞] 6x4 - 6(1)4 = lim[x→∞] 6x4 - 6 = ∞

The integral diverges as it approaches infinity. Therefore, by the integral test, the series[tex][\infty] 3 (2n 5)3 n = 1[/tex] is also divergent.

Learn more about series convergence/divergence

brainly.com/question/29698841

#SPJ11

The ratio test is a tool used to determine the convergence of a series. It involves taking the limit as n approaches infinity of the absolute value of the ratio of the (n+1)th term to the nth term. If this limit is less than 1, the series converges absolutely. If it is greater than 1, the series diverges. If it equals 1, the test is inconclusive.

In this case, we have the series ∑n=0[infinity]xⁿ17nⁿ. Applying the ratio test, we have:

|xⁿ+1 17ⁿ⁺¹| / |xn 17^nⁿ| = |ⁿ|/|xn| * 1/17

Taking the limit as n approaches infinity, we have:

lim (n->inf) |xⁿ/|⁺n| * 1/17 = r/17, where r is the limit of |xn+1|/|xn| as n approaches infinity.

Since r/17 is less than 1 (given that r = 1/17), we can conclude that the series converges absolutely. Therefore, the radius of convergence is equal to the reciprocal of the limit r, which is 17. Thus, the series converges absolutely for all values of x within a distance of 17 units from the origin.      

To know more about radius visit-

https://brainly.com/question/27696929

#SPJ11

a. the probability of only drawing balls with odd numbers is 5/210 = 1/42. b. the probability that the smallest drawn number is equal to k is (10-k+1 choose 4) / (10 choose 4) for k = 1,...,10.

(a) The probability of only drawing balls with odd numbers can be found by counting the number of ways to select four odd-numbered balls divided by the total number of ways to select four balls from the urn without replacement. There are 5 odd-numbered balls in the urn, so the number of ways to select four of them is (5 choose 4) = 5. The total number of ways to select four balls from the urn without replacement is (10 choose 4) = 210. Therefore, the probability of only drawing balls with odd numbers is 5/210 = 1/42.

(b) To find the probability that the smallest drawn number is equal to k for k = 1,...,10, we need to count the number of ways to select four balls from the remaining balls after the k-1 smallest balls have been removed, and divide by the total number of ways to select four balls from the urn without replacement. The number of ways to select four balls from the remaining (10-k+1) balls is (10-k+1 choose 4), and the total number of ways to select four balls from the urn without replacement is (10 choose 4). Therefore, the probability that the smallest drawn number is equal to k is (10-k+1 choose 4) / (10 choose 4) for k = 1,...,10.

Learn more about probability here

https://brainly.com/question/13604758

#SPJ11

The negation of the statement "For any integers a, b and c, if a-b is even and b-c is even, then a-c is even" is: "There exist integers a, b, and c such that a-b is even, b-c is even, and a-c is odd." The original statement is true.

The converse of the statement is: "For any integers a, b, and c, if a-c is even, then a-b is even and b-c is even." The converse is false. A counterexample would be a=3, b=2, and c=1. Here, a-c=2 which is even, but a-b=1 which is odd and b-c=1 which is odd.

The inverse of the statement is: "For any integers a, b, and c, if a-b is odd or b-c is odd, then a-c is odd." The inverse is false. A counterexample would be a=4, b=2, and c=1. Here, a-b=2 which is even, b-c=1 which is odd, but a-c=3 which is odd.

The contrapositive of the statement is: "For any integers a, b, and c, if a-c is odd, then a-b is odd or b-c is odd." The contrapositive is true. To see this, assume a-c is odd. Then either a is odd and c is even, or a is even and c is odd. In either case, a-b and b-c are either both odd or both even, so at least one of them is odd.

Learn more about integers here

https://brainly.com/question/929808

#SPJ11

Thus, the positive value of δ, the absolute value δ = 0.448 using the chain rule of differentiation, not one of the options given.

To solve for δ, we need to use the chain rule of differentiation. Starting with equation (i), we can take the derivative of both sides with respect to δ:
d/dδ(a/10) = d/dδ(7.52)

Using the chain rule, we can simplify the left side of the equation:
d/dδ(a/10) = (d/d(a/10))(a/10)' = (1/10)(a/10)'

Now we can substitute in the given value for d/dδ(a/10) and solve for (a/10)':
-33.865 = (1/10)(a/10)'
(a/10)' = -338.65

Now we can use equation (i) and substitute in the value for (a/10) and (a/10)':
7.52 = a/10
-338.65 = (a/10)'

Multiplying these equations together, we get:
-2540.468 = a'

Finally, we can use the derivative of the given equation to solve for δ:

a = 75.2δ
a' = 75.2
-2540.468 = 75.2
δ = -33.77/75.2
δ = -0.448

However, the problem asks for a positive value of δ, so we take the absolute value:
δ = 0.448

Therefore, the answer is not one of the options given in the question.

Know more about the chain rule of differentiation

https://brainly.com/question/30895266

#SPJ11

The table is attached in the solution.

Given that Maria selling the yogurts and the sandwiches at $3 and $6 respectively,

We need to make a table if she sells 0, 1, 2, 3, 4, 5, or 6 frozen yogurts same for the sandwiches,

Yogurt =

Since one yogurt cost $3 therefore we will multiply the number of yogurts to the unit rate to find the cost of the number of packets given,

Similarly,

Sandwich =

one sandwich cost $6 therefore we will multiply the number of sandwiches to the unit rate to find the cost of the number of packets given,

The table is attached.

Learn more about unit rates click;

https://brainly.com/question/29781084

#SPJ1

The 95% confidence interval for the mean heart rate of Chicago Marathon finishers five minutes after completing the race is (128.74, 135.26) beats per minute for variance.

To find the 95% confidence interval for the mean heart rate of Chicago Marathon finishers five minutes after completing the race, we can use the following formula:

[tex]CI = x +- (t * (s / \sqrt{n} ))[/tex]

where:
- CI is the confidence interval
- x is the sample mean (132)
- t is the t-value corresponding to the 95% confidence level
- s is the square root of the sample variance (the sample standard deviation)
- n is the sample size (41)

Step 1: Calculate the sample standard deviation
[tex]s = \sqrt{s^2} = \sqrt{105}[/tex]≈ 10.25

Step 2: Find the t-value for a 95% confidence level with 40 degrees of freedom (n - 1)
Using a t-table or calculator, we find that the t-value is approximately 2.021.

Step 3: Calculate the margin of error
Margin of Error =[tex]t * (s / \sqrt{n} ) = 2.021 * (10.25 / \sqrt{4} )[/tex] ≈ 3.26

Step 4: Calculate the confidence interval
CI = x ± Margin of Error = 132 ± 3.26
CI = (128.74, 135.26)

So, the 95% confidence interval for the mean heart rate of Chicago Marathon finishers five minutes after completing the race is (128.74, 135.26) beats per minute.

In set S, a 4-permutation example is (b, d, e, g), a 4-subset example is {a, c, d, e}, there are 35 subsets with exactly four elements, and there are 70 subsets with either three or four elements.

(a) A 4-permutation from the set S is an ordered arrangement of 4 distinct elements from the set. Example: (b, d, e, g)

(b) A 4-subset from the set S is a selection of 4 distinct elements without considering the order. Example: {a, c, d, e}

(c) To determine the number of subsets of S with exactly four elements, you can use the combination formula: C(n, k) = n! / (k!(n-k)!), where n is the total number of elements in the set (7 in this case) and k is the number of elements you want to select (4 in this case).

So, C(7, 4) = 7! / (4!3!) = 35 subsets with exactly four elements.

(d) To find the number of subsets of S with either three or four elements, calculate the number of subsets for each case separately, and then add them together.

For 3-element subsets, use C(7, 3) = 7! / (3!4!) = 35 subsets.

Then, add the results from (c) and this step: 35 (4-element subsets) + 35 (3-element subsets) = 70 subsets with either three or four elements.

Your answer: In set S, a 4-permutation example is (b, d, e, g), a 4-subset example is {a, c, d, e}, there are 35 subsets with exactly four elements, and there are 70 subsets with either three or four elements.

Know more about sets here:

https://brainly.com/question/28365114

#SPJ11

Pooling the population proportion estimates and the standard error of the difference between these estimates is justified when conducting significance tests about the difference between population proportions under certain conditions.

The pooling approach assumes that the two population proportions being compared are equal. This assumption allows us to estimate a common population proportion from the combined sample data, which leads to a more precise estimate of the standard error of the difference between the proportions.

The justification for pooling relies on the following conditions:

1. Independence: The samples from which the proportions are estimated must be independent of each other. This means that the observations within each sample should be unrelated to the observations in the other sample.

2. Random Sampling: The samples should be randomly selected from their respective populations. This helps to ensure that the samples are representative of their populations and that the estimates can be generalized.

3. Large Sample Sizes: Ideally, both samples should be large enough for the sampling distribution of each proportion to be approximately normal. This assumption is necessary for accurate estimation of the standard error.

If these conditions are met, pooling the proportion estimates and the standard error is justified because it improves the precision of the estimate and leads to more accurate hypothesis testing. By pooling the estimates, we can obtain a more reliable combined estimate of the population proportion, which results in a smaller standard error and more robust statistical inferences about the difference between the population proportions.

Learn more about pooling here:

https://brainly.com/question/27907649

#SPJ1

Using Green's theorem, the counterclockwise circulation is 3/2, and the counterclockwise outward flux is 5/6.

Green's theorem relates the circulation of a vector field around a closed curve to the outward flux of the curl of the vector field over the region bounded by that curve. In this case, we are given the vector field F(x, y) = (x + y)i + (x^2 + y^2)j and the triangle bounded by x = 1, y = 0, and y = x.

To calculate the counterclockwise circulation, we integrate the dot product of F and the tangent vector along the boundary of the triangle. The circulation can be written as ∮C F · dr, where C represents the curve bounding the triangle. Parameterizing the curve C, we have r(t) = (t, t) for 0 ≤ t ≤ 1. The tangent vector dr/dt is (1, 1).

Evaluating the circulation, we have ∮C F · dr = ∫₀¹ (t + t)(1) + (t^2 + t^2)(1) dt = ∫₀¹ (2t + 2t^2) dt = [t^2 + (2/3)t^3]₀¹ = 1 + (2/3) = 3/2.

Next, we need to find the counterclockwise outward flux. The outward flux can be calculated by integrating the curl of F over the region bounded by the triangle. The curl of F is given by ∂Q/∂x - ∂P/∂y, where P = x + y and Q = x^2 + y^2.

To find the flux, we integrate the curl over the region R enclosed by the triangle. We can rewrite the triangle as R: 0 ≤ y ≤ x, 1 ≤ x ≤ 1. Parameterizing the region R, we have r(x, y) = (x, y) for 1 ≤ x ≤ 1 and 0 ≤ y ≤ x. The normal vector pointing outward is (-∂y/∂x, ∂x/∂x) = (-1, 1).

Evaluating the flux, we have ∬R (∂Q/∂x - ∂P/∂y) dA = ∫₁¹ ∫₀ˣ (2y - 1 - 1) dy dx = ∫₁¹ (y^2 - y)₀ˣ dx = ∫₁¹ (x^2 - x - (0 - 0)) dx = ∫₁¹ (x^2 - x) dx = [(1/3)x^3 - (1/2)x^2]₁¹ = (1/3) - (1/2) = 5/6.

Therefore, the counterclockwise circulation is 3/2, and the counterclockwise outward flux is 5/6.

To learn more about integrate click here, brainly.com/question/31744185

#SPJ11

Statistically significant linear relationship between the independent variables (study hours and GPA) and the dependent variable (ACT score), and the multiple regression equation can be used to predict the ACT score based on the hours studied and the student's GPA.

In this scenario, the dependent variable is the ACT score, while the independent variables are the number of hours spent studying (x1) and the student's GPA (x2).

To find the p-value for the regression equation, we can use a statistical software or calculator to perform a multiple linear regression analysis. The p-value represents the probability that the observed relationship between the independent and dependent variables is due to chance.

Assuming that we have performed the analysis and obtained the results, we can say that the p-value is less than 0.01 (since the level of significance is set at 0.01). This suggests that there is a statistically significant linear relationship between the independent variables (study hours and GPA) and the dependent variable (ACT score).

To identify the multiple regression equation that best fits the data, we can look at the coefficients for each independent variable. These coefficients represent the change in the dependent variable (ACT score) for every one unit increase in the independent variable, holding all other variables constant.

Based on the given data, we can write the multiple regression equation as:

ACT score = b0 + b1(hours studied) + b2(GPA)

where b0 is the intercept, b1 is the coefficient for hours studied, and b2 is the coefficient for GPA.

Using the regression analysis results, we can plug in the values of the coefficients to obtain the specific equation that fits the data.

Overall, we can conclude that there is a statistically significant linear relationship between the independent variables (study hours and GPA) and the dependent variable (ACT score), and the multiple regression equation can be used to predict the ACT score based on the hours studied and the student's GPA.

Learn more on multiple regression here:

https://brainly.com/question/3737733

#SPJ11

The dimensions of the helmet box from least to greatest value are:

Height = 8 in.

Width = 9 in.

Length = 9 in.

The dimensions of the shipping box from least to greatest value are:

Height = 8 in.

Width = 11 in.

Length = 13 in.

The formula for the volume of a box are:

Volume = Length * Width * height

We are told that the equation that models the volume of the shipping box is 8(n + 2)(n + 4) = 1,144.

Thus:

8(n + 2)(n + 4) = 1144

8n² + 48n + 64 = 1144

8n² + 48n - 1080 = 0

Factorizing gives us:

8[(n - 9)(n + 15)] = 0

Solving for n gives us:

n = 9 or -15 inches

The dimensions of the helmet box are as follows

Width = 9 in.

Length = 9 in.

Height = 8 in.

The dimensions of the shipping box ordered are as follows;

Width = 9 + 2 = 11 in.

Length = 9 + 4 = 13 in.

Height = 8 in.

Read more about Box Dimensions at: https://brainly.com/question/18751789

#SPJ4

Complete question is:

As an employee of a sporting goods company, you need to order shipping boxes for bike helmets. Each helmet is packaged in a box that is n inches wide, n inches long, and 8 inches tall. The shipping box you order should accommodate the boxed helmets along with some packing material that will take up an extra 2 inches of space along the width and 4 inches of space along the length. The height of the shipping box should be the same as the helmet box. The volume of the shipping box needs to be 1,144 cubic inches. The equation that models the volume of the shipping box is 8(n + 2)(n + 4) = 1,144.

using your solution from question 1, enter the dimensions of the bike helmet shipping box. enter the lengths in order

from least to greatest value.

The absolute maximum is 198 and the absolute minimum is 12.To find the absolute maximum and minimum values of the given function, we need to find the critical points and endpoints of the interval and evaluate the function at those points. Then, we can compare the values to determine the maximum and minimum values.

(a) Interval = [-3, -1]

To find critical points, we take the derivative of the function and set it to zero:

f'(x) = 4x^3 - 20x = 0

=> 4x(x^2 - 5) = 0

This gives us critical points at x = -√5, 0, √5. Evaluating the function at these points, we get:

f(-√5) ≈ 11.71

f(0) = 12

f(√5) ≈ 11.71

Also, f(-3) ≈ 78 and f(-1) = 2

Therefore, the absolute maximum is 78 and the absolute minimum is 2.(b) Interval = [-4, 1]

Using the same method, we find critical points at x = -√3, 0, √3. Evaluating the function at these points and endpoints, we get:

f(-√3) ≈ 13.54

f(0) = 12

f(√3) ≈ 13.54

f(-4) = 160

f(1) = 3

Therefore, the absolute maximum is 160 and the absolute minimum is 3.(c) Interval = [-3, 4]

Again, using the same method, we find critical points at x = -√2, 0, √2. Evaluating the function at these points and endpoints, we get:

f(-√2) ≈ 14.83

f(0) = 12

f(√2) ≈ 14.83

f(-3) ≈ 198

f(4) ≈ 188.

For such more questions on Absolute minimum:

https://brainly.com/question/31501241

#SPJ11

- The velocity vector is v(t) = 2ti + 7j + (9/t)k.

- The acceleration vector is a(t) = 2i + (9/t^2)k.

- The speed of the particle is given by the magnitude of the velocity vector, which is ||v(t)|| = √(4t^2 + 49 + (81/t^2)).

The velocity vector represents the rate of change of position with respect to time. To find it, we take the derivative of the position vector r(t) with respect to time. In this case, the derivative of t^2 with respect to t is 2t, the derivative of 7t with respect to t is 7, and the derivative of 9 ln(t) with respect to t is (9/t).

The acceleration vector represents the rate of change of velocity with respect to time. To find it, we take the derivative of the velocity vector v(t) with respect to time. The derivative of 2t with respect to t is 2, and the derivative of 9/t with respect to t is (9/t^2).

Finally, the speed of the particle is the magnitude of the velocity vector, which is found by taking the square root of the sum of the squares of the components of the velocity vector. In this case, the speed is given by the expression √(4t^2 + 49 + (81/t^2)), where the squares and reciprocal are applied to the corresponding components of the velocity vector.The velocity, acceleration, and speed of a particle with the given position function r(t) = t^2i + 7tj + 9 ln(t)k are as follows:

- The velocity vector is v(t) = 2ti + 7j + (9/t)k.

- The acceleration vector is a(t) = 2i + (9/t^2)k.

- The speed of the particle is given by the magnitude of the velocity vector, which is ||v(t)|| = √(4t^2 + 49 + (81/t^2)).

The velocity vector represents the rate of change of position with respect to time. To find it, we take the derivative of the position vector r(t) with respect to time. In this case, the derivative of t^2 with respect to t is 2t, the derivative of 7t with respect to t is 7, and the derivative of 9 ln(t) with respect to t is (9/t).

The acceleration vector represents the rate of change of velocity with respect to time. To find it, we take the derivative of the velocity vector v(t) with respect to time. The derivative of 2t with respect to t is 2, and the derivative of 9/t with respect to t is (9/t^2).

Finally, the speed of the particle is the magnitude of the velocity vector, which is found by taking the square root of the sum of the squares of the components of the velocity vector. In this case, the speed is given by the expression √(4t^2 + 49 + (81/t^2)), where the squares and reciprocal are applied to the corresponding components of the velocity vector.

Learn more about acceleration here;

https://brainly.com/question/2303856

#SPJ11

Answer :

a)

By cross multiplication

[tex] \dfrac{3x + 4}{2} = 9.5 \\ \\ 3x + 4 = 9.5 \times 2 \\ \\ 3x + 4 = 19 \\ \\ 3x = 19 - 4 \\ \\ 3x = 15 \\ \\ x = \dfrac{15}{3} \\ \\ { \underline{x = 5}}[/tex]

b)

[tex] \dfrac{7 + 2x }{3} = 5 \\ \\ 7 + 2x = 5 \times 3 \\ \\ 7 + 2x = 15 \\ \\ 2x = 15 - 7 \\ \\ 2x = 8 \\ \\ x = \dfrac{8}{2} \\ \\ { \underline{x = 4}}[/tex]

Correct. Well done!!

The correct expressions which model the value of the phone after t years are given by 300(0.87)t/12 and 300(0.9885)t. Value of a cellular phone depreciates at a rate of 13% every month.

Given a cellular phone's value depreciates at a rate of 13% every month. So, the phone's value will decrease by 13% of its original value every month. Therefore, the equation for the phone's value after t years is given by:

V(t) = $300 × (1 - 0.13)ᵗ, where t is the time in years.

The given expressions, 300(0. 87)/12 and 300(0. 1880)t 300(0. 87)t/12 and 300(0. 9885)t 300(0. 87)124 and 300(0. 1880)t 300(0. 87) 12 and 300(0. 9885)t. Do not model the value of the phone after t years. Therefore, the correct answer is 300(0. 87)t/12 and 300(0. 9885)t.

The value of a cellular phone depreciates at a rate of 13% every month, which means that the remaining value of the phone after one month is 87% of the original value. Therefore, to calculate the value after t years, the equation

V(t) = $300 × (1 - 0.13)ᵗ should be used.

By plugging in the time t in years, we can get the remaining value of the phone. The first option (300(0.87)/12 must be corrected because it only calculates the phone's value after one month, which is not the question asked. Therefore, the correct expression that model the phone's value after t years is given by 300(0.87)t/12 and 300(0.9885)t.

To know more about the depreciates, visit :

brainly.com/question/14243288

#SPJ11

The given limit can be expressed as a definite integral on the interval [2, 5] by using the definition of a Riemann sum:

lim Σ [4(xi*)3 − 7xi*]Δx, [2, 5]
n→[infinity] i = 1

This can be rewritten as:

lim Σ [(4(xi*)3 − 7xi*)/2] 2(n/2)Δx, [2, 5]
n→[infinity] i = 1

where Δx = (5 - 2)/n = 3/n and xi* is any point in the ith subinterval [xi-1, xi]. We have also divided n into 2 equal parts to get 2(n/2)Δx.

Now, we can express the above Riemann sum as a definite integral by taking the limit of the sum as n approaches infinity:

lim n→[infinity] Σ [(4(xi*)3 − 7xi*)/2] 2(n/2)Δx

= lim n→[infinity] Σ [(4(xi*)3 − 7xi*)/2] (5-2)/n (n/2)

= lim n→[infinity] Σ [(4(xi*)3 − 7xi*)/2] (3/2)

= ∫2^5 [(4x^3 − 7x)/2] dx

Therefore, the limit can be expressed as the definite integral:

∫2^5 [(4x^3 − 7x)/2] dx.

To know more about integral visit:

https://brainly.com/question/22008756

#SPJ11

Quotient q(x), is 2x, and the remainder, r(x), is -x + 1

To find the quotient, q(x), and remainder, r(x), when dividing a(x) by b(x), we can use long division or synthetic division.

Using long division, we would start by dividing the highest degree term of a(x) by the highest degree term of b(x), which gives us x. We would then multiply b(x) by x to get

[tex]x³ + x[/tex]

and subtract this from a(x) to get

[tex]x² + x[/tex]

We repeat this process, dividing the highest degree term of

[tex]x² + x[/tex] by the highest degree term of b(x), which gives us x. We would then multiply b(x) by x to get

[tex]x² + 1[/tex]

and subtract this from

[tex]x² + x[/tex]

to get -x + 1. Since the degree of -x + 1 is less than the degree of b(x), this is our remainder, r(x).

The quotient, q(x), is the sum of the terms we divided by, which are x and x, so q(x) = 2x. The division of a(x) by b(x) is: a(x)/b(x) = 2x + (-x + 1)/b(x)

We found that the quotient, q(x), is 2x, and the remainder, r(x), is -x + 1, when dividing a(x) by b(x) using long division. This means that a(x) can be expressed as the product of b(x) and q(x), plus the remainder r(x).

Learn more about Quotient here:

https://brainly.com/question/16134410

#SPJ1

Step-by-step explanation:

By trigonometry :

cos A = 6/12

cos A = 1/2

A = 60°

and, values of B :

cos B = 6√3/12

cos B = √3/2

B = 30°

Values of A and B are 60° and 30°

Subject : Mathematics

Level : JHS

Chapter : Geometry

The probability of drawing a red marble from the bowl is: 21.21%.

The probability that a green marble was chosen from the cup is 5.7%.

1st draw: Cup: 4/11 chance of Green (G1), 7/11 chance of Red (R1).

2nd draw: Bowl:

If G1, chances remain 2/3 Green (G2), 1/3 Red (R2).

If R1, chances are 2/4 Green (G2), 2/4 Red (R2).

(b) The probability of drawing a red marble from the bowl is: (4/111/3) + (7/112/4) = 4/33 + 14/44

= 0.2121 or 21.21%.

(c) Given a red marble is chosen from the bowl, the probability that a green marble was chosen from the cup is (4/11*1/3) / 0.2121 = 0.057 or 5.7%.

Read more about probability here:

https://brainly.com/question/24756209

#SPJ1

When working with polar coordinates, it's important to remember that r represents the distance from the origin to the point in question. Since we're looking for a positive value of r, we'll choose the positive square root when solving for r. This ensures that we're measuring the distance in a positive direction, away from the origin.

For example, let's say we have a point in Cartesian coordinates (3, -4). To find the polar coordinates with r > 0, we first need to find the value of r. We can use the Pythagorean theorem to do this:

r^2 = x^2 + y^2
r^2 = 3^2 + (-4)^2
r^2 = 9 + 16
r^2 = 25

Now we can take the positive square root to solve for r:

r = sqrt(25)
r = 5

So the distance from the origin to the point (3, -4) is 5. To find the angle (theta) in polar coordinates, we can use the inverse tangent function:

theta = arctan(y/x)
theta = arctan(-4/3)

Note that we use the negative value for y because the point is in the third quadrant, where y values are negative.

So the polar coordinates for the point (3, -4) with r > 0 are (5, arctan(-4/3)).

Learn more about Cartesian coordinates: https://brainly.com/question/4726772

#SPJ11

x ≡ 859 (mod 756) is the solution to the system of congruences.

To solve the system of congruences x ≡ 7 (mod 9), x ≡ 4 ( mod 12) and x ≡ 16 (mod 21), we can use the method of simultaneous equations.

Step 1: Start with the first two congruences, x ≡ 7 (mod 9) and x ≡ 4 ( mod 12). We can write these as a system of linear equations:

x = 9a + 7

x = 12b + 4

where a and b are integers. Solving for x, we get:

x = 108c + 67

where c = 4a + 1 = 3b + 1.

Step 2: Substitute x into the third congruence, x ≡ 16 (mod 21), to get:

108c + 67 ≡ 16 (mod 21)

Simplify the congruence:

3c + 2 ≡ 0 (mod 21)

Step 3: Solve the simplified congruence, 3c + 2 ≡ 0 (mod 21), by trial and error or using a modular inverse. In this case, we can see that c ≡ 7 (mod 21) satisfies the congruence.

Step 4: Substitute c = 7 into the expression for x:

x = 108c + 67 = 108(7) + 67 = 859

Therefore, the solutions to the system of congruences are x ≡ 859 (mod lcm(9,12,21)), where lcm(9,12,21) is the least common multiple of 9, 12, and 21, which is 756.

Hence, x ≡ 859 (mod 756) is the solution to the system of congruences.

Learn more about congruences here

https://brainly.com/question/30818154

#SPJ11

Cube B will have larger volume.

Given,

12 in = 1 ft

Volume of Cube A = a³ =  216 in³

Side of Cube A (a) = 6 in

Now,

Volume of Cube B = a³ = (0.6)³

Volume of Cube B = 0.216 ft³

Side of Cube B = 0.6 ft

Convert ft into inches for comparison of volumes:

Side of Cube A = 6 in

Side of Cube A = 0.5 ft

Volume of Cube A  = (0.5)³

Volume of Cube A = 0.125 ft³

Thus after comparison Cube B will have larger volume than Cube A.

Know more about Cubes,

https://brainly.com/question/28134860

#SPJ1

If 2^x=3 the answer is 9/4 equal.

Given, 2^x = 3

We need to find 4^(-x)

Let's first write 4 in terms of 2.4 = 2 × 2

Now, we can write 4^(-x) in terms of 2 as (2 × 2)^(-x) = 2^(-x) × 2^(-x) = (2^(-x))^2

We know that 2^x = 3

Now, let's find 2^(-x) using the above expression.

2^x = 32^(-x) × 2^x = 2^(-x) × 32^(-x) = 3/2

Now, 4^(-x) can be written as (2^(-x))^2

Substituting 2^(-x) = 3/2, we get4^(-x) = (2^(-x))^2= (3/2)^2= 9/4

Hence, the answer is 9/4.

4^(-x) = 9/4

Given, 2^x = 3

We need to find 4^(-x)

Let's first write 4 in terms of 2.4 = 2 × 2

Now, we can write 4^(-x) in terms of 2 as (2 × 2)^(-x) = 2^(-x) × 2^(-x) = (2^(-x))^2

We know that 2^x = 3

Now, let's find 2^(-x) using the above expression.

2^x = 32^(-x) × 2^x = 2^(-x) × 32^(-x) = 3/2

Now, 4^(-x) can be written as (2^(-x))^2

Substituting 2^(-x) = 3/2, we get4^(-x) = (2^(-x))^2= (3/2)^2= 9/4

Hence, the answer is 9/4.

To know more about expression visit:

https://brainly.com/question/28170201

#SPJ11

The equation of the line perpendicular to p is given as follows:

y = -x/3 - 1.

The slope-intercept equation for a linear function is presented as follows:

y = mx + b

The coefficients m and b represent the slope and the intercept, respectively, and are explained as follows:

The slope of line p is given as follows:

(2 - (-1))/(2 - 1) = 3.

As the two lines are perpendicular, the slope of line n is obtained as follows:

3m = -1

m = -1/3.

Hence:

y = -x/3 + b.

When x = 3, y = -2, hence the intercept b is obtained as follows:

-2 = -1 + b

b = -1.

Hence the equation is given as follows:

y = -x/3 - 1.

The graph of line p is given by the image presented at the end of the answer.

More can be learned about linear functions at https://brainly.com/question/15602982

#SPJ1