describe all unit vectors orthogonal to both of the given vectors. 2i − 6j -3k, −6i+ 18j − 9k

The orthorhombic unit cell illustrating the (1 2 1) direction will have a straight line connecting the starting corner with the point reached after moving 1 unit along the x-axis, 2 units along the y-axis, and 1 unit along the z-axis

1. Orthorhombic unit cell have lattice parameters a, b, and c and have all angles equal to 90 degrees (α = β = γ = 90°).

2. The (1 2 1) direction refers to the vector direction that moves 1 unit in the x direction (a), 2 units in the y direction (b), and 1 unit in the z direction (c).

3. In an orthorhombic unit cell, you can visualize the (1 2 1) direction by starting at a corner of the unit cell and moving 1 unit along the x-axis, 2 units along the y-axis, and 1 unit along the z-axis.

4. Since all angles in the orthorhombic unit cell are 90 degrees, the (1 2 1) direction will be a straight line connecting the starting point and the final point after moving along the x, y, and z directions.

So, the orthorhombic unit cell illustrating the (1 2 1) direction will have a straight line connecting the starting corner with the point reached after moving 1 unit along the x-axis, 2 units along the y-axis, and 1 unit along the z-axis.

Learn more about orthorhombic unit cell here:

https://brainly.com/question/30542242

#SPJ11

The correct option is B - 14 units.

Triangle ABC and triangle CDE are shown below. Side AE is a hypotenuse to the right triangle CDE whose right angle is at vertex D. We are to find the length of side BD. We will proceed to solve this problem by making use of Pythagorean Theorem.Let a side of the equilateral triangle ABC be x units, then the other two sides of the triangle will also be x units. Since it is an equilateral triangle, all its sides are equal, and all its angles are equal.

Therefore, angle BAC = angle ABC = angle ACB = 60°.Also, we know that side AE is 20 units. Let the length of side BD be y units.Now, we will use Pythagorean Theorem to find the length of side BD:BD2 + DE2 = BE2DE = AE - AD = 20 - xNow, since triangle ABC is an equilateral triangle, we have:x2 + x2 - 2xcos 60° = 20²2x2 - x² = 400∴ 3x² = 400∴ x² = 400/3∴ x = (400/3)1/2Putting this value of x into the expression for DE, we get:DE = 20 - x = 20 - (400/3)1/2Now, we can substitute the value of DE and x into the expression for BD2:BD2 + (20 - (400/3)1/2)2 = (400/3)This expression simplifies to:BD2 = (400/3) - 400 + 400/3∴ BD2 = 400/3 - 400/3∴ BD2 = 400/9∴ BD = (400/9)1/2.

Therefore, the length of side BD is:BD = (400/9)1/2 ≈ 6.66 units (rounded off to 2 decimal places)In option A, the length of side BD is given as 12 units. But, as we have shown, the length of side BD is approximately 6.66 units. Hence, option A is incorrect.The correct option is B - 14 units.Answer: B - 14 units.

Learn more about equilateral triangle here,

https://brainly.com/question/30285619

#SPJ11

The triangle in the image is a right triangle. We are given a side and an angle, and asked to find another side. Therefore, we should use a trigonometric function.

Trigonometric Functions: SOH-CAH-TOA

---sin = opposite/hypotenuse, cosine = adjacent/hypotenuse, tangent = opposite/adjacent

In this problem, looking from the angle, we are given the adjacent side and want to find the opposite side. This means we should use the tangent function.

tan(40) = x / 202

x = tan(40) * 202

x = 169.498

x (rounded) = 169 meters

Answer: the tower is 169 meters tall

Hope this helps!

Answer:

170 meters

Step-by-step explanation:

The three sides of a right triangle are named hypotenuse, adjacent side and opposite side and the angle the adjacent side makes with they hypotenuse is θ  (see Figure 1)

In this description the terms
     Opposite --> side  opposite to the angle θ

      Adjacent --> side adjacent  to the angle θ

      Hypotenuse --> longest side of the right triangle

The relationship between the ratio of the shorter sides and and the angle θ in the figure is given by the formula

[tex]\mathrm {\tan(\theta) = \dfrac{Opposite \; side}{Adjacent \;side}}[/tex]

We can view the Eiffel Tower as the opposite side, the distance from the base to the surveyor location as the adjacent side (see the second figure)

If we let h = height of the Eiffel Tower in meters , opposite side length = h m

The adjacent side length = 202 meters

The angle θ = 40°

Applying the tan formula we get
[tex]\tan(40^\circ) = \dfrac{h}{202}\\\\\textrm{Multiplying both sides by 202, }\\202 \tan(40^\circ) = h\\\\\\h = 202 \tan(40^\circ) \\\textrm{Using a calculator we get}\\\\h = 169.5\; meters[/tex]

Rounded to the nearest meter, the height = 170 meters

The analysis used in the first court case is an example of statistical inference and the second court case is not an example of statistical inference.

The analysis used in the first court case is an example of statistical inference because it involves drawing a conclusion based on probability. It utilizes statistical techniques to make inferences about the entire population based on a sample.

In this case, the conclusion about cheating on the test was made by comparing the proportion of matches on wrong answers between the two groups.

On the other hand, the analysis in the second court case is not an example of statistical inference.

This is because it does not involve drawing conclusions based on probability or using statistical techniques to make inferences about a larger population. The fact that the second case involves 1025 students instead of only 88 students does not necessarily make it an example of statistical inference.

Learn more about statistical inference here:

https://brainly.com/question/30484842

#SPJ1

To find the particular solution to the differential equation y′=3x3 that passes through (1,4.75), we need to use the given general solution y=c 3x44.

First, we differentiate the general solution to get y′=12cx33.

Next, we substitute the point (1,4.75) into the equation:

4.75 = c 3(1)^4 + C

where C is the constant of integration.

Simplifying this equation, we get:

4.75 = 3c + C

To find the value of C, we need to solve for it. We can do this by using the fact that the particular solution passes through the point (1,4.75). Substituting these values into the equation above, we get:

4.75 = 3c + C

4.75 = 3c + C

4.75 - 3c = C

So C = 4.75 - 3c.

Now we substitute this value of C back into the general solution to get the particular solution:

y = c 3x44

y = (4.75 - 3c) 3x44

Therefore, the particular solution to the differential equation y′=3x3 that passes through (1,4.75), given that y=c 3x44 is a general solution, is y = (4.75 - 3c) 3x44.

Learn more about constant of integration: https://brainly.com/question/27419605

#SPJ11

The volume of the cone is 48 cubic units when the height of the cone is 4 units.

The given equation V = 12h represents the volume of cones with a radius of 6 units.
The volume of a cone is given by the formula V = (1/3)πr²h, where r is the radius of the cone, h is the height of the cone and π is the value of pi which is approximately equal to 3.14.
Given that radius, r = 6 units. Therefore, the formula for the volume of the cone can be written as
V = (1/3)π(6)²h= 12h cubic units
As per the problem, this relation is used to find the volume of cones with a radius of 6 units. For instance, if the height of the cone is 4 units, then using the formula above, the volume of the cone can be calculated by substituting h = 4 units.V = 12 × 4= 48 cubic units

Therefore, the volume of the cone is 48 cubic units when the height of the cone is 4 units.

To know more about volume of cone, click here

https://brainly.com/question/29767724

#SPJ11

The circle with a center at (0, 0) and passing through (0, -3) has an area and circumference that can be calculated. The area can be found using the formula A = πr^2, and the circumference can be found using the formula C = 2πr, where r is the radius of the circle.

Given that the center of the circle is at (0, 0) and it passes through (0, -3), we can determine that the radius of the circle is 3 units. The distance between the center (0, 0) and the point on the circle (0, -3) gives us the radius.

To find the area of the circle, we use the formula A = πr^2. Substituting the radius, we have A = π(3^2) = 9π square units.

To find the circumference of the circle, we use the formula C = 2πr. Substituting the radius, we have C = 2π(3) = 6π units.

Therefore, the area of the circle is 9π square units, and the circumference of the circle is 6π units.

Learn more about circumference here:

https://brainly.com/question/28757341

#SPJ11

An employee will earn 12,060,000 pesos in a year if he/she earns 33,500 pesos per day.

If an employee earns 33,500 pesos per day, he/she will earn 1,005,000 pesos in 30 days and 12,060,000 pesos in one year.

The calculation of earnings of an employee can be calculated using the following formula:

Salary = daily wage x number of working days in a month/year

Let us calculate the salary of the employee in 30 days:

Salary for 30 days = 33,500 pesos/day x 30 days

= 1,005,000 pesos

An employee will earn 1,005,000 pesos in 30 days if he/she earns 33,500 pesos per day.

Let's calculate the salary of the employee in a year:

Salary for 1 year = 33,500 pesos/day x 365 days

= 12,227,500 pesos

To know more about  formula please visit :

https://brainly.com/question/29797709

#SPJ11

(a) Pseudocode for the algorithm that finds the first repeated integer in a given sequence of integers is as follows:

1. Initialize an empty set called "visited".

2. Traverse the given sequence of integers.

3. For each integer in the sequence, check if it is already in the "visited" set.

4. If the integer is in the "visited" set, return it as the first repeated integer.

5. Otherwise, add the integer to the "visited" set.

6. If there is no repeated integer, return "None".

(b) The worst-case time complexity of the algorithm is O(n), where n is the length of the sequence of integers.

Therefore, the time complexity of the algorithm increases linearly with the size of the input sequence.

Read more about the Pseudocode.

https://brainly.com/question/17442954

#SPJ11

The angle between the first and second order diffraction maxima for microwaves of wavelength 3.00 cm that are incident normally on a row of parallel metal rods with a separation of 8.00 cm and the first order diffraction maximum observed at an angle of 22.0° to the direction of the incident waves is 37.0°.

Explanation:The grating equation is given as;dsinθ = nλWhere;d = separation between the slitsθ = angle between the incident direction and the direction of the diffracted light

λ = wavelength of lightn = order of diffraction

When the first order diffraction maximum is observed at an angle of 22.0°, we have;d sin 22.0° = λ …(1)

Also, when the second order diffraction maximum is observed at an angle θ2, we have;d sin θ2 = 2λ …(2)

Dividing equation (2) by equation (1);

d sin θ2/d sin 22.0°

= 2λ/λsin θ2/sin 22.0°

= 2sin θ2/sin 22.0°

= 2 × 3.00 c/sin 22.0°θ2 = sin⁻¹(2sin 22.0°)θ2 = 37.0°

Therefore, the angle between the first and second order diffraction maxima is 37.0°.

To know more about distance visit :-

https://brainly.com/question/26550516

#SPJ11

According to some reports, the proportion of American adults who drink coffee daily is 0.54. Given that parameter, if samples of 500 are randomly drawn from the population of American adults, the mean and standard deviation of the sample proportion are 0.54 and 0.0223, respectively.

The standard deviation of a population or sample and the standard error of a statistic are quite different, related. The sample mean's standard is the standard deviation . The standard deviation of the set of means that would be found by  an infinite number of repeated samples,  from the population and computing a mean.

The mean's standard out to the equal the population, the standard deviation is divided by the square root of the sample size,  by using the sample standard deviation divided by the square root of the sample size. For a poll's standard is the expected standard deviation of the estimated mean if the same poll were to be conducted multiple times. Thus, the standard error estimates the standard deviation of an estimate, which itself measures how much the estimate depends on the particular sample that was taken from the population.

To know more about  standard deviation. Click on the link.

https://brainly.com/question/29088233

#SPJ11

The formula expressing [tex]S_n[/tex] as a function of n for the recurrence relation [tex]S_n=-S_{n-1}+10[/tex] and initial condition [tex]S_0=-4[/tex] is [tex]S_n = 5n-4[/tex] if n is even and [tex]S_n = -5n+14[/tex]  if n is odd.

if n is even, and[tex]S_n = 5n - 4[/tex]  if n is odd.

The given recurrence relation is:

[tex]S_n = -S_{n-1} + 10[/tex]

And the initial condition is:

[tex]S_0 = -4[/tex]

To use the method of iteration, we start by substituting n-1 for n in the recurrence relation:

[tex]S_{n-1} = -S_{n-2} + 10[/tex]

Next, we can substitute this expression into the original recurrence relation:

[tex]S_n = -(-S_{n-2} + 10) + 10[/tex]

Simplifying this, we get:

[tex]S_n = S_{n-2}[/tex]

We can continue this process of substitution, getting:

[tex]S_{n-2} = -S_{n-3} + 10[/tex]

Simplifying, we get:

[tex]S_n = S_{n-3} - 10[/tex]

Substituting again:

[tex]S_{n-3} = -S_{n-4} + 10[/tex]

Simplifying:

[tex]S_n = S_{n-4} - 20[/tex]

We can see a pattern emerging: each time we substitute, we go back two steps and subtract 10 or 20.

So we can write the general formula for [tex]S_n[/tex] in terms of [tex]S_0[/tex] as follows:

If n is even:

[tex]S_n = S_0 + 10\times (n/2)[/tex]

If n is odd:

[tex]S_n = -S_0 - 10\times ((n-1)/2)[/tex]

Using the initial condition [tex]S_0 = -4,[/tex] we can simplify these formulas:

If n is even:

[tex]S_n = -4 + 10\times (n/2) = 5n - 4[/tex]

If n is odd:

[tex]S_n = 4 - 10\times ((n-1)/2) = -5n + 14.[/tex]

The formula expressing [tex]S_n[/tex] as a function of n for the given recurrence relation and initial conditions is: [tex]S_n = 5n - 4[/tex]

For similar question on initial conditions.

https://brainly.com/question/24241688

#SPJ11

To use the method of iteration, we need to repeatedly apply the recurrence relation to the initial condition and previous terms until we reach the nth term.

Starting with S0 = -4, we can find S1 by plugging in n=1 into the recurrence relation:

S1 = -S0 + 10 = -(-4) + 10 = 14

Using S1, we can find S2:

S2 = -S1 + 10 = -(14) + 10 = -4

We can continue this process to find the first few terms:

S3 = -S2 + 10 = -(-4) + 10 = 14
S4 = -S3 + 10 = -(14) + 10 = -4

Notice that S2 and S4 are the same value, and S1 and S3 are the same value. This suggests that the sequence alternates between two values: -4 and 14.

We can write this as a formula:

S(n) = -4 if n is even
S(n) = 14 if n is odd

Alternatively, we could write it as:

S(n) = (-1)^n * 9 + 5

This formula also produces alternating values of -4 and 14, and can be derived using the method of recurrence relations.

To learn more about recurrence relations click here,brainly.com/question/31384990

#SPJ11

The response variable in the given linear regression output is seasonal catch, as indicated by the coefficient estimate and standard error of the variable "size."

The response variable in this simple linear regression is the seasonal catch (thousands of bass per square mile of lake area). In a linear regression, the response variable is the variable we are trying to predict or estimate based on the values of other variables. In this case, we are trying to estimate the seasonal catch of bass in the lake based on the size of the lake. So, the correct answer is b. seasonal catch.

                                                The response variable in the given linear regression output is seasonal catch, as indicated by the coefficient estimate and standard error of the variable "size."

Learn more about response variable

brainly.com/question/14662435

#SPJ11

The given statement is False.

Effect modification, also known as interaction, is not a phenomenon that needs to be eliminated. Instead, it is a phenomenon that the investigator needs to identify and account for in data analysis.

Effect modification occurs when the relationship between an exposure and an outcome differs depending on the level of another variable, known as the effect modifier. Failing to account for effect modification can lead to biased estimates and incorrect conclusions.

Therefore, it is essential for investigators to assess for effect modification and report findings accordingly. This can involve stratifying the data by the effect modifier and analyzing each stratum separately or including an interaction term in the statistical model.

To know more about effect modification, visit:

https://brainly.com/question/31585505

#SPJ11

The taylor polynomials for 2 is [tex]7 + 7x^2[/tex] and for 3 is [tex]7x + (7/3)x^3.[/tex]

To find the Taylor polynomials for a function, we need to calculate the function's derivatives at the point where we want to center the polynomials. In this case, we want to center the polynomials at x=0.

First, let's find the first few derivatives of[tex]f(x) = 7tan(x):[/tex]

[tex]f(x) = 7tan(x)[/tex]

[tex]f'(x) = 7sec^2(x)[/tex]

[tex]f''(x) = 14sec^2(x)tan(x)[/tex]

[tex]f'''(x) = 14sec^2(x)(2tan^2(x) + 2)[/tex]

[tex]f''''(x) = 56sec^2(x)tan(x)(tan^2(x) + 1) + 56sec^4(x)[/tex]

To find the Taylor polynomials, we plug these derivatives into the Taylor series formula:

[tex]P_n(x) = f(0) + f'(0)x + (f''(0)x^2)/2! + ... + (f^n(0)x^n)/n![/tex]

For n=2:

[tex]P_2(x) = f(0) + f'(0)x + (f''(0)x^2)/2![/tex]

[tex]= 7tan(0) + 7sec^2(0)x + (14sec^2(0)tan(0)x^2)/2[/tex]

[tex]= 7 + 7x^2[/tex]

So the second-degree Taylor polynomial centered at x=0 for f(x) is [tex]P_2(x) = 7 + 7x^2.[/tex]

For n=3:

[tex]P_3(x) = f(0) + f'(0)x + (f''(0)x^2)/2! + (f'''(0)x^3)/3![/tex]

[tex]= 7tan(0) + 7sec^2(0)x + (14sec^2(0)tan(0)x^2)/2 + (14sec^2(0)(2tan^2(0) + 2)x^3)/6[/tex]

[tex]= 7x + (7/3)x^3[/tex]

So the third-degree Taylor polynomial centered at x=0 for f(x) is [tex]P_3(x) = 7x + (7/3)x^3.[/tex]

Learn more about polynomials

brainly.com/question/11536910

#SPJ11

The linear speed of the truck is 199.5π/88 mph.

The circumference of each wheel is:

C = πd = π(42 in.) = 42π in.

The distance the truck travels in one revolution of the wheels is equal to the circumference of the wheels. Therefore, the distance the truck travels in one minute is:

d = 42π in./rev × 505 rev/min = 21159π in./min

To convert this to miles per hour, we need to divide by the number of inches in a mile and the number of minutes in an hour:

d = 21159π in./min × (1 mile/63360 in.) × (60 min./1 hour) = 199.5π/88 miles/hour

So, the linear speed of the truck is 199.5π/88 mph.

To know more about linear speed refer here:

https://brainly.com/question/13100116

#SPJ11

Step-by-step explanation:

a)

it all starts with the right-angled triangle at the bottom, under the seat row plane. it gives us the length of the tilted line from the front wall to row A, which is the baseline (Hypotenuse) for that triangle.

we know the bottom line (5.6 m). we know the angle at the left vertex (12°), and because the angle on the ground right underneath row A is 90°, the angle at row A is

180 - 90 - 12 = 78°

Hypotenuse/sin(90) = bottom line/sin(78)

Hypotenuse = 5.6/sin(78) = 5.725107331... m

the outside angle at the bottom left vertex is the inside angle of the same vertex for the triangle above the tilted floor. and that is the complementary angle to 12° (= 90-12 = 78°).

so the length of the line of sight from row A to the bottom of the screen (= side c) is then for the triangle above the tilted floor :

c² = 2.5² + 5.725107331...² - 2×2.5×5.72...×cos(78) =

= 33.07527023...

c = 5.751110347... m

so, we see, the length of the line of sight is slightly different to the length of the tilted floor. it is not an isoceles triangle.

the angle at the vertex at the bottom of the screen we get with the same method (this time we have all sides and need the angle) :

5.725107331...² = 2.5² + 5.751110347...² - 2×2.5×5.75...×cos(C)

cos(C) = -(5.725107331...² - 2.5² - 5.751110347...²)/(2×2.5×5.75...) = 0.227727026...

C = 76.8367109...°

the angle of elevation is then based on a horizontal line from row A

180 - 90 - 76.8367109... = 13.1632891...° ≈ 13.2°

b)

now we need to do the same things for row P.

the bottom line is now 19.6 m.

the angles still the same as before for the bottom triangle :

12° at the left bottom vertex, 90° in the ground under row P, 78° at the vertex directly at row P.

the length of the tilted floor (Hypotenuse) is then

Hypotenuse/sin(90) = 19.6/sin(78) = 20.03787566... m

the outside angle at the bottom left vertex is also the same as before. the complementary angle to 12° (= 90-12 = 78°).

so the length of the line of sight from row P to the bottom of the screen (= side c) is then for the triangle above the tilted floor :

c² = 2.5² + 20.03787566...² - 2×2.5×20.03...×cos(78) =

= 386.9359179...

c = 19.67068677... m

the angle at the vertex at the bottom of the screen we get with the same method (this time we have all sides and need the angle) :

20.03787566...² = 2.5² + 19.67068677...² - 2×2.5×19.75...×cos(C)

cos(C) = -(20.03787566...² - 2.5² - 19.67068677...²)/(2×2.5×19.67...) = -0.084700073...

C = 94.85877813...°

the angle of depression is then based on a horizontal line from row P

94.85877813... - 90 = 4.858778132...° ≈ 4.9°

why does this look different to the case in a) ?

because we are looking down instead of up, we have to compare it now to the outside supplementary angle at the bottom vertex of the screen (we are building another triangle on top of the line of sight) :

180 - 94.85877813... = 85.14122187...°

and our angle of depression is

180 - 90 - 85.14122187... = 4.858778132...° (see above).

The angle of elevation from Row A to the bottom of the screen is 78⁰.

The angle of depression from Row P to the bottom of the screen is 7.5⁰.

The angle of elevation from Row A to the bottom of the screen is calculated as follows;

from row A to the bottom of the screen, is a straight line;

angle elevation of row A to bottom of screen = 90 - 12⁰ = 78⁰

The length of row A to row P is calculated as;

cos 12 = L/19.6 m

L = 19.6 m x cos (12)

L = 19.2 m

The angle of depression from Row P to the bottom of the screen is calculated as follows;

sinθ = 2.5 m / 19.2 m

sinθ = 0.1302

θ = sin⁻¹ (0.1302)

θ =  7.5⁰

Learn more about angle of elevation here: https://brainly.com/question/88158

#SPJ1

P(B) = P(black and A) + P(black and M) = (11+15+15)/80 = 41/80

P(A ? B) = P(black and A) = 41/80

we have P(A) = 1, P(B) = 41/80, and P(A ? B) = 41/80.

P(B | A) = P(A and B) / P(A) = (11+15+15) / (13+10+11+11+15+7+15+18) = 41/80. This represents the probability of a randomly selected black car having an automatic transmission.

P(A | C') = P(A and C') / P(C') = (10+11+15+18) / (10+11+15+18+7+11+11+15) = 54/73. This represents the probability of a randomly selected non-white car having an automatic transmission.

a) From the table, we can calculate the following probabilities:

P(A) = P(A and white) + P(A and blue) + P(A and black) + P(A and red) = (13+10+11+11+15+7+15+18)/80 = 80/80 = 1

P(B) = P(black and A) + P(black and M) = (11+15+15)/80 = 41/80

P(A ? B) = P(black and A) = 41/80

So, we have P(A) = 1, P(B) = 41/80, and P(A ? B) = 41/80.

b) We can calculate the following conditional probabilities:

P(A | B) = P(A and B) / P(B) = (11+15+15) / (11+10+11+15+7+15+18) = 41/77. This represents the probability of a randomly selected car having an automatic transmission, given that it is black.

P(B | A) = P(A and B) / P(A) = (11+15+15) / (13+10+11+11+15+7+15+18) = 41/80. This represents the probability of a randomly selected black car having an automatic transmission.

c) We can calculate the following conditional probabilities:

P(A | C) = P(A and C) / P(C) = (13+15) / (13+10+11+15) = 28/49. This represents the probability of a randomly selected white car having an automatic transmission.

P(A | C') = P(A and C') / P(C') = (10+11+15+18) / (10+11+15+18+7+11+11+15) = 54/73. This represents the probability of a randomly selected non-white car having an automatic transmission.

For such more questions on probabilities

https://brainly.com/question/13604758

#SPJ11

The probability values are

Given that

COLOR

TRANSMISSION TYPE white blue black red

A                                         13     10     11     11

M                                         15     07    15    18

Also, we have

For the probabilities, we have

(a) P(A) = (13 + 10 + 11 + 11)/(13 + 10 + 11 + 11 + 15 + 07 + 15 + 18)

P(A) = 9/20

P(B) = (11 + 15)/100

P(B) = 13/50

P(A and B) = 11/100

(b) P(A | B) = P(A and B)/P(B)

P(A | B) = (11/100)/(13/50)

P(A | B) = 11/26

This means that the probability that a car is automatic given that it is black is 11/26

P(B | A) = P(A and B)/P(A)

P(B | A) = (11/100)/(9/20)

P(B | A) = 11/45

This means that the probability that a car is black given that it is automatic is 11/45

(c) P(A | C) = P(A and C)/P(C)

Where P(A and C) = 13/100 and P(C) = 28/100

So, we have

P(A | C) = (13/100)/(28/100)

P(A | C) = 13/28

This means that the probability that a car is automatic given that it is white is 13/28

P(A | C') = P(A and C')/P(C')

Where P(A and C') = 32/100 and P(C') = 72/100

So, we have

P(A | C') = (32/100)/(72/100)

P(A | C') = 4/9

This means that the probability that a car is automatic given that it is not white is 4/9

Read more about probability at

https://brainly.com/question/31649379

#SPJ4

For the given sequence, aₙ₊₁=1/2(aₙ+(2/aₙ)); a₀=2, the sequence is non- increasing and the limit of the sequence is 2/√3.

a.

To determine whether the sequence is non-decreasing or non-increasing, we need to examine the signs of aₙ₊₁ − aₙ for all n. So, let's find the first few terms of the sequence:

a₁ = 1/2(a₀ + 2/a₀) = 1/2(2 + 1) = 3/2

a₂ = 1/2(a₁ + 2/a₁) ≈ 1.5288

a₃ = 1/2(a₂ + 2/a₂) ≈ 1.4991

Since a₃ < a₂, the sequence is non-increasing.

b.

To find the limit of the sequence, we can use the fact that it is bounded and monotonic, and apply Theorem 10.5. Let L be the limit of the sequence, then taking the limit of both sides of the recurrence relation, we get:

L = 1/2(L + 2/L)

Multiplying both sides by 2L, we get:

2L² = L² + 4

Simplifying, we get:

L² = 4/3

Taking the positive square root, since L is nonnegative, we get:

L = 2/√3

Therefore, the limit of the sequence is 2/√3.

To learn more about sequence : https://brainly.com/question/7882626

#SPJ11

The values of the missing angles are:

a) x = 172 and y = 178.

b) p = 36, n = 112 and q = 144.

c) r = 90 and s = 100

We have,

a)

The sum of the angles in a triangle = 180

So,

70 + 38 + x = 180

x = 180 - 108

x = 172

And,

y is the exterior angle.

So,

y = 70 + 108

y = 178

b)

68 is an exterior angle.

So,

68 = 32 + p

p = 68 - 32

p = 36

And,

32 + p + n = 180

32 + 36 + n = 180

n = 180 - 68

n = 112

And,

q = 32 + n

q = 32 + 112

q = 144

c)

In a parallelogram,

The opposite sides are parallel and congruent, and the opposite angles are also congruent.

So,

r = 90

s = 100

Thus,

a) x = 172 and y = 178.

b) p = 36, n = 112 and q = 144.

c) r = 90 and s = 100

Learn more about triangles here:

https://brainly.com/question/25950519

#SPJ1

The indefinite integral of (7 - eu)^2 du is 49u - 14(e^u)/1 + e^2u/2 + C.

The indefinite integral of (7 - eu)^2 du is:

∫(7 - eu)^2 du = ∫(49 - 14eu + e^2u) du = 49u - 14(e^u)/1 + e^2u/2 + C

To evaluate the indefinite integral of (7 - eu)^2 du, we use the formula for integrating powers of exponential functions, which states that ∫e^au du = (1/a)e^au + C, where C is the constant of integration. By applying this formula, we can expand the given expression and integrate term by term.

First, we expand (7 - eu)^2 using the binomial theorem, which gives us 49 - 14eu + e^2u. Then, we integrate each term using the formula above, which gives us 49u - 14(e^u)/1 + e^2u/2 + C, where C is the constant of integration.

Therefore, the indefinite integral of (7 - eu)^2 du is 49u - 14(e^u)/1 + e^2u/2 + C.

Learn more about indefinite integral here

https://brainly.com/question/27419605

#SPJ11

Given a budget of $1800 for fuel and an assumed cost of 30 cents per mile, an individual would be able to travel a maximum of 6000 miles over the course of an entire year.

To get the maximum number of miles that can be driven with a fuel budget of $1800, we divide the budget by the cost per mile. This gives us the maximum number of miles that can be driven. For the sake of argument, let's say that the hypothetical cost per mile is thirty cents.

The maximum number of miles that can be driven, hence the calculation becomes miles = 1800 / 0.30. We are able to find the solution to the equation by performing the evaluation.

When we divide $1800 by 0.30, we get 6000. Therefore, given a budget of $1800 for fuel and an assumed cost of 30 cents per mile, an individual would be able to travel a maximum of 6000 miles over the course of an entire year.

Learn more about cents here:

https://brainly.com/question/15483313

#SPJ11

Thus, Differentiation Part of the Fundamental Theorem of Calculus:

a) sin(t^4)/4

b) sin(sqrt(s^4 + 1))/sqrt(s^4 + 1)

c)  (t + 1)ln(t + 1) - (t + 1)

d)  (1/2)ln|z + 2| + z

e)  (1/ln2)(sqrt(pi)/2)erfi(sqrt(ln2)t)

The Differentiation Part of the Fundamental Theorem of Calculus states that if f(x) is a continuous function on the interval [a,b] and F(x) is an antiderivative of f(x), then:
d/dx integral^b_a f(t) dt = f(x)

Using this theorem, we can find the derivatives of the given integrals as follows:

a) d/dx integral^x_2 cos(t^4) dt
= cos(x^4) [by applying the Differentiation Part of the FTC and noting that the antiderivative of cos(t^4) is sin(t^4)/4]

b) d/dx integral^6_x cos (squareroot s^4 + 1)ds
= -cos(sqrt(x^4 + 1)) [by applying the Differentiation Part of the FTC and noting that the antiderivative of cos(sqrt(s^4 + 1)) is sin(sqrt(s^4 + 1))/sqrt(s^4 + 1)]

c) d/dx integral^2x + 1_2 In(t + 1)dt
= In(x + 1) [by applying the Differentiation Part of the FTC and noting that the antiderivative of ln(t + 1) is (t + 1)ln(t + 1) - (t + 1)]

d) d/dx integral^x_-x z + 1/z + 2 dz
= 0 [by applying the Differentiation Part of the FTC and noting that the antiderivative of z + 1/(z + 2) is (1/2)ln|z + 2| + z]

e) d/dx integral^2_-3x 2^t2 dt
= -6x2^(9x^2) [by applying the Differentiation Part of the FTC and noting that the antiderivative of 2^(t^2) is (1/ln2)(sqrt(pi)/2)erfi(sqrt(ln2)t)]

Know more about the Fundamental Theorem of Calculus

https://brainly.com/question/31400239

#SPJ11

To express 2/3 and 3/4 as a pair of fractions with a common denominator, we can find the least common multiple (LCM) of the denominators and then adjust the numerators accordingly.

To begin, we need to find the least common multiple (LCM) of the denominators, which in this case is 12. Next, we convert 2/3 and 3/4 to fractions with a common denominator of 12.
For 2/3, we multiply both the numerator and denominator by 4 to get 8/12. Since 2 multiplied by 4 is 8, and 3 multiplied by 4 is 12.
For 3/4, we multiply both the numerator and denominator by 3 to get 9/12. Since 3 multiplied by 3 is 9, and 4 multiplied by 3 is 12.
Now, we have 8/12 and 9/12 as a pair of fractions with a common denominator of 12. These fractions can be compared or used in further calculations since they have the same denominator.

Learn more about least common multiple here
https://brainly.com/question/30060162



#SPJ11

There will be 20 3-point questions and 10 4-point questions on the test.

a. Identify the problem: Determine the number of 3-point and 4-point questions on the test.

b. Let the number of 3-point questions = x and the number of 4-point questions = y. Write the two equations for the system:

x + y = 30 (equation 1, representing the total number of questions)

3x + 4y = 100 (equation 2, representing the total points on the test)

c. Use substitution to solve for y in the first equation:

y = 30 - x

d. Substitute the value for y into the second equation to solve for x:

3x + 4(30 - x) = 100

3x + 120 - 4x = 100

-x = -20

x = 20

e. There will be 20 3-point questions and 30 - 20 = 10 4-point questions.

f. Check the solution by substituting the values into both equations:

20 + 10 = 30 (equation 1 is satisfied)

3(20) + 4(10) = 100 (equation 2 is satisfied)

Therefore, there will be 20 3-point questions and 10 4-point questions on the test.

To know more about equations, visit:

https://brainly.com/question/12020593

#SPJ11

The the answer to the expression 4x + 3 is simply 4x + 3 itself.

4x + 3 is an algebraic expression that represents a polynomial. It can be simplified or evaluated depending on the given problem. If there are no instructions given, then we assume that the expression is to be simplified. Hence, we must combine like terms. 4x and 3 cannot be combined as they are not like terms. Therefore, the expression is already in its simplest form.

All algebraic expressions are not polynomials, though. But algebraic expressions are what all polynomials are. The distinction is that algebraic expressions also include irrational numbers in the powers, whereas polynomials only include variables and coefficients with the mathematical operations (+, -, and ).Additionally, algebraic expressions may not always be continuous (for example, 1/x2 - 1), whereas polynomials are continuous functions (for example, x2 + 2x + 1).

Know more about algebraic expression  here:

https://brainly.com/question/19245500

#SPJ11

The representation is guaranteed to be valid for values of dc + 0.24 such that |dc + 0.24| < 1, or -1.24 < dc < 0.76.

We know that the power series representation of the function f(z) = 1/(1-z) is:

f(z) = ∑(n=0 to infinity) z^n

If we substitute z = dc + 0.24 into this power series, we get:

f(dc + 0.24) = ∑(n=0 to infinity) (dc + 0.24)^n

To get this in a form we can work with, we can expand the binomial term using the binomial theorem:

f(dc + 0.24) = ∑(n=0 to infinity) [(d^0 * 0.24^n)/0! + (d^1 * 0.24^(n-1))/1! + (d^2 * 0.24^(n-2))/2! + ...] * dc^n

We can simplify this expression by writing out the first few terms explicitly:

f(dc + 0.24) = 1 + (dc + 0.24) + (dc + 0.24)^2 + (dc + 0.24)^3 + ...

The first four nonzero terms are:

1 + (dc + 0.24) + (dc^2 + 0.48dc + 0.0576) + (dc^3 + 0.72dc^2 + 0.2688dc + 0.031104)

The full series with summation notation is:

∑(n=0 to infinity) [(d^0 * 0.24^n)/0! + (d^1 * 0.24^(n-1))/1! + (d^2 * 0.24^(n-2))/2! + ...] * dc^n

The representation is guaranteed to be valid for values of z such that |z| < 1, since this is the radius of convergence of the power series for 1/(1-z).

Therefore, the representation is guaranteed to be valid for values of dc + 0.24 such that |dc + 0.24| < 1, or -1.24 < dc < 0.76.

To know more about power series refer here :

https://brainly.com/question/28209832#

#SPJ11

The distribution of S(t) in the Black-Scholes model, where the underlying asset follows a geometric Brownian motion.

We have:

Zn(t) = ln(Sn(t))

= ln(S(0)) − [n t] + ln(1 + σ √[n t] [M[n t] 2 − [n t]]) − ln(1 − σ √[n t] [M[n t] 2 − [n t]])

= ln(S(0)) − [n t] + ln(1 + σ √[n t] W(n)(t)) − ln(1 − σ √[n t] W(n)(t))

where we have used M[n t] = W(n)(t)√[n t] and the fact that ln(1 + x) ≈ x − x^2/2 for small x.

Using the Taylor series expansion of ln(1 + x) at the order 2, we have:

ln(1 + σ √[nt] W(n)(t)) ≈ σ √[nt] W(n)(t) − σ^2/2 [nt] W(n)(t)^2

ln(1 − σ √[nt] W(n)(t)) ≈ −σ √[nt] W(n)(t) − σ^2/2 [nt] W(n)(t)^2

Substituting these into the expression for Zn(t) yields:

Zn(t) ≈ ln(S(0)) − [nt] + σ √[nt] W(n)(t) − σ^2/2 [nt] W(n)(t)^2 − (−σ √[nt] W(n)(t) − σ^2/2 [nt] W(n)(t)^2)

= ln(S(0)) − [nt] + σ^2 [nt] W(n)(t)^2

Taking the limit as n → ∞, we have:

Z(t) = lim n→∞ Zn(t)

= ln(S(0)) − tσ^2/2

This means that the distribution of Zn(t) converges to a normal distribution with mean ln(S(0)) − tσ^2/2 and variance σ^2t. Since Zn(t) approximates ln(Sn(t)), the distribution of Sn(t) converges to a lognormal distribution with mean S(0) e^(−tσ^2/2) and variance S(0)^2 (e^(σ^2t) − 1).

This is the distribution of S(t) in the Black-Scholes model, where the underlying asset follows a geometric Brownian motion.

To know more about Brownian motion refer here

https://brainly.com/question/28441932#

#SPJ11

Answer:

use 360°/ n

Step-by-step explanation:

where n is the number of sides

did you understand like that

The median of the given set of numbers is -13.5.

To find the median of a set of numbers, you need to arrange them in ascending order and then determine the middle value. If there is an even number of values, the median is the average of the two middle values.

Let's arrange the numbers in ascending order:

-18, -18, -14, -13, 12, 13, 14, 16

The set has 8 elements, so it has an even number of values. The middle two values are -14 and -13. To find the median, we take the average of these two values:

Median = (-14 + -13) / 2 = -27 / 2 = -13.5

Learn more about ascending order here:

https://brainly.com/question/31946606

#SPJ11