Answer:
The disruption of the bonds or attractions occurs during protein hydrolysis which results in the loss for the primacy structure. The peptide bonds is the bond affected in this scenario.
The disruption of the bonds however only exist in the process of denaturation and this results in a change in the confirmation which could be secondary, tertiary, and quaternary structural related. And example of the bonds affected include salt bridges, disulfide bridges, hydrogen bonds etc.
What is the atomic number of arsenic (As)?
O A. 33
O B. 15
C. 75
D. 4
SUB
Answer:
33
Explanation:
Is a diamond a homogeneous or heterogeneous mixture or a substance
Answer:
heterogeneous
Explanation:
It's a heterogeneous mixture. Diamond is made of just one element: carbon. Each carbon atom in diamond is connected to four other carbon atoms, in a crystal that extends on and on. There are other forms of pure carbon where the atoms are bonded differently, notably charcoal and graphite.
What is the pressure if the height of a column of mercury is 0.20 m and the density of mercury is 13,600 kg/m3? (remember, gravity is 9.81 m/s2)
Answer:
[tex]p=26683.2Pa[/tex]
Explanation:
Hello,
In this case, since the pressure is computed via:
[tex]p=h*\rho*g[/tex]
Whereas h is the 0.520-m height, [tex]\rho[/tex] is the 13600-kg/m³ density and the g the 9.81-m/s² gravity. Thus, the pressure in Pa is:
[tex]p=0.20m*13,600 \frac{kg}{m^3} *9.81\frac{m}{s^2} \\\\p=26683.2\frac{kg*\frac{m}{s^2} }{m^2} =26683.2\frac{N}{m^2}\\ \\p=26683.2Pa[/tex]
Best regards.
If 25.6 mL isopropyl alcohol fully decomposes, what mass of H2 is formed? The density of isopropyl alcohol is 0.785 g/mL. g
Answer:
The correct answer is 0.67 g H₂
Explanation:
Isopropyl alcohol (C₃H₇OH) can decompose to give acetone (C₂H₆OH) and hydrogen gas (H₂) according to the following chemical equation:
C₃H₇OH (g) ⇒ C₂H₆CO(g) + H₂(g)
We can calculate the initial mass of isopropyl alcohol from the density and volume data:
density = m/V = 0.785 g/mL
⇒ m = density x V = 0.785 g/mL x 25.6 mL = 20.096 g C₃H₇OH
According to the chemical equation 1 mol of C₃H₇OH gives 1 mol H₂. The molar mass of C₃H₇OH is:
molar mass C₃H₇OH = (12 g/mol x 3) + (1 g/mol x 7) + 16 g/mol + 1 g/mol = 60 g/mol
molar mass H₂ = 1 g/mol x 2 = 2 g/mol
So, we obtain: 2 g H₂ from 60 g C₃H₇OH. We multiply this stoichiometric ratio (2 g H₂/60 g C₃H₇OH) by the initial mass of C₃H₇OH to obtain the mass of H₂ is formed:
20.096 g C₃H₇OH x (2 g H₂/60 g C₃H₇OH) = 0.6698 g ≅ 0.67 g H₂
Condensation occurs with the removal of thermal energy.
True or False? If false, rewrite to make the question true.
PLZZZ HELP
Answer:
true
Explanation:
Condensation is the opposite of vaporization. True. When does condensation occurs, does a gas lose or gain thermal energy?
Answer:
True
Explanation:
Condensation is formed with moisture and cold air, so the removal of thermal energy, or heat, would create the perfect conditions :)
__________ 5. Chemical equilibrium is the result of A. all of the reactants being converted into products. B. stoppage of further reaction. C. formation of products equal in mass to the mass of the reactants. D. opposing reactions attaining equal rates. E. a loss of pressure in the system.
Answer:
The correct option is C
Explanation:
Chemical equilibrium is a state in which there is no net change in the amount of reactant and products formed over time. This reaction is a reversible reaction, hence the reaction can keep proceeding in either direction until the products formed are equal in mass to that of the reactants or the products been reversed back to the reactants until both sides (product and reactant) achieve equal mass.
The amount of force that is exerted on a balloon by the gas inside the balloon is.
O A) temperature
OB) prlessure
O C) volume
O D) heat
Answer:
pressure
Explanation:
pressure is the amount of force exerted on an area. when you blow up the balloon you're filling it with gas particles. the gas particles move freely within the balloon and may collide with one another exerting pressure on the inside of the balloon.
The pressure of the gas is the amount of force that is exerted on a balloon by the gas inside the balloon. Therefore, option B is correct.
What is pressure?Pressure can be described as the force applied perpendicular to the surface of a body per unit area. Pressure can be defined as a standard mechanical quantity and is derived from a unit of force divided by a unit of area.
The SI unit of measurement of pressure, the pascal (Pa) or Newton per square meter (N/m²). Pressure can be defined as the amount of force exerted perpendicular to the surface per unit area.
Mathematically, the pressure exerted by force can be calculated as:
[tex]{\displaystyle p={\frac {F}{A}}}[/tex]
where, p is the pressure, F is the magnitude of the normal force, and A is the area of the surface.
Therefore, the amount of force that is exerted on the balloon by the gas inside the balloon is equal to pressure.
Learn more about pressure, here:
https://brainly.com/question/27637460
#SPJ2
The atoms of which element will gain electrons to form an ion?
oxygen
calcium
lithium
mercury
Explanation:
Oxygen will gain electrons to form ion (O²⁻).
Calcium loses electron to form ion (Ca²⁺)
Lithium loses electron to form ion (Li⁺)
Mercury loses electron to form ion (Hg²⁺)
Here it is stated in question that the element will gain electron it means electron bears negative charge.
Therefore,
Option A is correct ✔.
Define a function compute_gas_volume that returns the volume of a gas given parameters pressure, temperature, and moles. Use the gas equation PV
Answer:
def compute_volume(pressure,moles,temperature):
volume = (8.314 * moles * temperature)/pressure
print("Volume: "+str(volume))
Explanation:
This line defines the function
def compute_volume(pressure,moles,temperature):
This line calculates the volume
volume = (8.314 * moles * temperature)/pressure
This line prints the calculated volume
print("Volume: "+str(volume))
I need help on this. It’s kinda confusing...
Answer: here u go
Explanation:
A. 3.7 x 10^4
B. 4.56 × 10^-8
C. 8.01 × 10^6
Work for A:
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 37,000
New Number: 3.7000
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 3 . 7 0 0 0
Decimal Count: 1 2 3 4
There are 4 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 3.7 (Please notice any zeroes on the end have been removed)
b = 4
Now the whole thing:
3.7 x 104
Step 4
Check your work:
104 = 10,000 x 3.7 = 37,000
Work for B:
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 456
New Number: 0.0000000456
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 0 . 0 0 0 0 0 0 0 4 5 6
Decimal Count: 1 2 3 4 5 6 7 8 9 10
There are 2 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 4.56
b = 2
Now the whole thing:
4.56 x 102
Step 4
Check your work:
102 = 100 x 4.56 = 456
Work for C:
Step 1
To find a, take the number and move a decimal place to the right one position.
Original Number: 8,010,000
New Number: 8.010000
Step 2
Now, to find b, count how many places to the right of the decimal.
New Number: 8 . 0 1 0 0 0 0
Decimal Count: 1 2 3 4 5 6
There are 6 places to the right of the decimal place.
Step 3
Building upon what we know above, we can now reconstruct the number into scientific notation.
Remember, the notation is: a x 10b
a = 8.01 (Please notice any zeroes on the end have been removed)
b = 6
Now the whole thing:
8.01 x 106
Step 4
Check your work:
106 = 1,000,000 x 8.01 = 8,010,000
Hope this helps!
Write the half-reaction for ribose conversion to CO2. Is it an oxidation- or reduction- half reaction
Answer:
[tex]5H_2O+C_5H_{10}O_5\rightarrow 5CO_2+20H^++20e^-[/tex]
Explanation:
Hello.
In this case, when ribose (C₅H₁₀O₅) yields carbon dioxide (CO₂) we write:
[tex]C_5H_{10}O_5\rightarrow CO_2[/tex]
Which needs to be balanced by adding water and hydrogen ions:
[tex]5H_2O+C_5H_{10}O_5\rightarrow 5CO_2+20H^++20e^-[/tex]
You can also see that there are 20 transferred electrons, since the carbon atoms in the ribose have 0 as their oxidation state and the carbon atoms in the carbon dioxide have +4 as the oxidation state, thus, each carbon transfers 4 electrons, a five carbon atoms transfer 20 electrons overall.
In such a way, since the carbon is increasing its oxidation state, such half reaction is an oxidation half reaction.
Best regards.
Which of the following is true?
A) The closer an electron is to the nucleus, the higher its energy level.
B) The closer an electron is to the nucleus, the lower its energy level.
C) The closer an electron is to the nucleus, the more its energy level fluctuates.
D) There is no relationship between proximity to the nucleus and the energy level of an electron
Answer:
B) The closer an electron is to the nucleus the lower it's energy level.
Explanation:
This is because the attractive force for electrons to the nucleus is stronger. Thus, the orbital energy becomes less.
When drawing the Lewis structure of a molecule, start by determining the total number of available valence based on each element's ___________ group number. Then, use the total number of electrons needed for each element to be stable, generally based on________ its charge, to determine the____________ ionic charge by finding the difference between the number of needed and available electrons divided by two.
Next, identify the central atom, which is the element with the __________ fewest valence electrons other than hydrogen. Finally, arrange the number of bonds around the central atom to fulfill the stable number of electrons for each element.
Answer:
Group number, octet's rule, total number of bonds and fewest valence electrons.
Explanation:
Hello,
For the given statement is answer is bolded:
"When drawing the Lewis structure of a molecule, start by determining the total number of available valence based on each element's group number. Then, use the total number of electrons needed for each element to be stable, generally based on the octet's rule its charge, to determine the total number of bonds by finding the difference between the number of needed and available electrons divided by two.
Next, identify the central atom, which is the element with the fewest valence electrons other than hydrogen. Finally, arrange the number of bonds around the central atom to fulfill the stable number of electrons for each element".
For the first one, it is widely known that the group number provides the number of valence electrons as nitrogen is in group VA and it has five valence electrons, chlorine is in grou´p VIIA and it has seven valence electrons and so on.
For the second one, it is also known that the octet's rule limit the amount of bonds as it has been demonstrated that each compound can hold up to 8 electrons overall excluding some exceptions.
For the third one, based on the octet's rule, an element must have as much bonds as missing electrons to complete eight, for instance, carbon has four valence electrons, so it need four bonds (each one providing one valence electron) in order to attain the octet.
Finally, the central atom must have the fewest number of valence electrons as it shows the other bonds and elements attaining the octet. Usually, the central atom is not demanded to get 8 electrons, for instance in AlCl₃, which is:
[tex]\ \ \ \ \ Cl-Al-Cl\\.\ \ \ \ \ \ \ \ \ \ \ \ \ |\\.\ \ \ \ \ \ \ \ \ \ \ \ Cl[/tex]
Has aluminum as the central one due to the fact that it has three valence electrons whereas chlorine seven and it does not attain the octet.
Best regards.
i need to know how to get a boy to like me
Answer:
To get a boy to like you you have to 1.dress up cutely
2.talk to him ask him what he likes
3. wear a little bit of make-up not to much
4. wear you hair down and have a little bit of hair on your chest
5. Be really confident and don't wait till a really longg time and mess up like i did.
Explanation:
Answer:
Put your hair down. Also, dont use too much makeup. Just wear mascara and lipgloss. Be kind. Be confident.
Explanation:
If u wear to much makeup he will think ur a try-hard. Stop trying to be cool, it's just dumb. If ur rude, then hes gonna think that u dont like him.
an oxide of copper is decomposed forming copper metal and oxygen gas. a 0.500 g sample of this oxide is decomposed, forming 0.444 g of copper metal. what is the empircal formula of the gold oxide
Answer:
[tex]Cu_2O[/tex]
Explanation:
Hello.
In this case, since the reaction obeys the law of conservation of mass, since the initial oxide had a mass of 0.500 g and yielded 0.444 g of copper, the mass of oxygen in the oxide is:
[tex]m_O=0.500g-0.444g=0.056g[/tex]
In such a way, we next compute the moles of copper and oxygen by using their atomic masses:
[tex]n_{Cu}=0.444g*\frac{1mol}{63.546 g} =0.00699mol\\\\n_O=0.056g*\frac{1mol}{16.00g}=0.0035mol[/tex]
Next, in order to compute the subscripts of Cu and O on the empirical formula we divide the moles by the fewest moles, in this 0.0035 mol as shown below:
[tex]Cu:\frac{0.00699}{0.0035} =2\\\\O:\frac{0.0035}{0.0035} =1[/tex]
It means that the empirical formula turns out:
[tex]Cu_2O[/tex]
Best regards!
What are the signs that you are getting nervous 18 POINTS )
An ideal gaseous reaction (which is a hypothetical gaseous reaction that conforms to the laws governing gas behavior) occurs at a constant pressure of 35.0 atm and releases 74.6 kJ of heat. Before the reaction, the volume of the system was 8.20 L . After the reaction, the volume of the system was 2.80 L . Calculate the total internal energy change, ΔE, in kilojoules.
Answer:
ΔU = −55.45 kJ
Explanation:
From first law of thermodynamics in chemistry, we have;
ΔU = Q + W
where;
ΔU is change in internal energy
Q is the net heat transfer
W is the net work done
We are given;
Q = 74.6 kJ
But Q will be negative since heat is released
Thus;
ΔU = -74.6 kJ + W
We are given;
Constant pressure; P = 35 atm = 35 × 101325 = 3546375 N/m²
Volume before reaction; Vi = 8.2 L = 0.0082 m³
Volume after reaction; V_f = 2.8 L = 0.0028 m³
Now,
W = -P(V_f - V_i)
W = - 3546375(0.0028 - 0.0082)
W = 19.15 KJ
Thus;
ΔU = Q + W
ΔU = -74.6 kJ + 19.15 KJ =
ΔU = −55.45 kJ
A chemist decomposes samples of several compounds; the masses of their constituent elements are listed. Calculate the empirical formula for each compound.
a. 1.245 g Ni, 5.381 g I,
b. 2.677 g Ba, 3.115 g Br,
c. 2.128 g Be, 7.557 g S, 15.107 g
Answer:
you can see the empirical formula at the pic
The empirical formula for compound (a) is NiI2, (b) is BaBr2 and (c) is BeS.
What is empirical formula?
Empirical formula of a compound is defined as the simplest whole number ratio of atoms present in a compound.
(a) 1.245 g Ni : 5.381 g I
Mole of Ni ; Mole of I = 1.245/59 : 5.381/127 = 0.02 : 0.04 = 1:2
So the formula is NiI2
(b) 2.677 g Ba : 3.115 g Br
Mole of Ba : Mole of Br = 2.677/137 : 3.115/60 = 0.019 : 0.038
= 0.02 : 0.04 = 1:2
So the formula is BaBr2
(c) 2.128 g Be : 7.557 g S
Mole of Be : Mole of S = 2.128/9 : 7.557/32 = 0.2 : 0.2 = 1:1
So the formula is BeS
Thus, empirical formula for compound (a) is NiI2, (b) is BaBr2 and (c) is BeS.
To learn more about empirical formula, refer to the link below:
https://brainly.com/question/11588623
#SPJ2
What is the dependent variable? Be specific. *
If a teacher washes the tops of the student
desks with rubbing alcohol daily, the
spread of germs in the classroom may be
diminished.Be specific when you write your answer HELPPPPP I NEED IT ASAP!
Which element contains four electrons in its third and outer main energy level?
Answer:
valence electrons
Explanation:
The valence electrons are the outer most electrons and the principal energy level in which they belong will vary for .
The chemical element which contains four (4) electrons in its third and outer main energy level is: Silicon (Si).
An electron shell can be defined as the outermost shell of an atom of a chemical element around the atomic nucleus.
Hence, an electron shell is an orbital that is typically accompanied by electrons around the nucleus of an atom.
A sublevel is also referred to as an orbital and it can be defined as an energy level that is associated with the electrons found outside the atomic nucleus.
In Chemistry, there are four main (4) types of sublevel and these are:
s orbital (sublevel): it has one (1) orbital i.e 1s.p orbital (sublevel): it has three (3) orbitals.d orbital (sublevel): it has five (5) orbitals.f orbital (sublevel): it has seven (7) orbitals.In the third (3rd) energy level, there are only three (3) sublevels and these are; s, p and d sublevels.
Silicon is a chemical element that is found in group (4) of the periodic table because it has four (4) electrons in its third and outermost shell.
In its ground state, Silicon (Si) contains the following number of electrons:
Two electrons in its first (n = 1) energy level. Eight electrons in the second (n = 2) energy level.Lastly, it contains four (4) electrons in its third (n = 3) and outer main energy level.Read more: https://brainly.com/question/18214726
Elements with similar chemical properties are organized in the same
A.) Group
B.) Period
C.) Electron Shell
D.) Row
Answer:
electron shell is the answer
What are the two ways
that heat is measured?
Answer:
heat is mesured in calories and also joules
Explanation:
Products made of plastic can last a very long time. Explain both the positive and negative effects of plastic being long-lasting. thank uuu
Answer:Because plastic products are durable, they can last for a long time. This makes them affordable because they do not have to be replaced often. On the other hand, the popular use of plastics means that many plastics are thrown away. Plastics litter the ocean, causing harm to marine birds and mammals. Plastic breaks down into plastic dust, which can last for up to a thousand years.
^^^^^copy and paste this part^^^^^
Explanation:Plastic is he hardest material to break down with harm to sea life and land life they may be affordable but costly to the environment.
Assuming constant pressure, rank these reactions from most energy released by the system to most energy absorbed by the system, based on the following descriptions:
Surroundings get colder and the system decreases in volume.
Surroundings get hotter and the system expands in volume.
Surroundings get hotter and the system decreases in volume.
Surroundings get hotter and the system does not change in volume.
A mole of X reacts at a constant pressure of 43.0 atm via the reaction.
X(g)+4Y(g)→2Z(g), ΔH∘=−75.0 kJ
Also assume that the magnitude of the volume and temperature changes are similar among the reactions. Rank from most energy released to most energy absorbed. To rank items as equivalent, overlap them. View Available Hint(s)
Answer:
The options are
A.Surroundings get colder and the system decreases in volume.
B.Surroundings get hotter and the system expands in volume.
C.Surroundings get hotter and the system decreases in volume.
D.Surroundings get hotter and the system does not change in volume.
From the Most energy released to the most absorbed , the order is
B. Surroundings get hotter and the system expands in volume.
D. Surroundings get hotter and the system does not change in volume.
C. Surroundings get hotter and the system decreases in volume.
A. Surroundings get colder and the system decreases in volume.
is used to locate and track severe storm
Answer:
Weather radar is used to locate and track severe storm.
Soil is an example of a:
a. solution
b. heterogeneous mixture
c. solid solution
Answer:
Heterogeneous mixture
Explanation:
Soil is composed of small pieces of a variety of materials, so it is a heterogeneous mixture.
write the equation for the beta decay of 53/26 FE
Answer:
53/26Fe = 0/-1,B + 53/27 Co
Has 121 nuetrons and 80 electrons plz help i will pick you as brainliest
Answer:
Mercury Atom
Explanation:
If you are talking about what has 121 neutrons and 80 electrons, then it would be a Mercury Atom. Hope this helps!
A gas mixture contains HBr, NO2, and C2H6 at STP. If a tiny hole is made in the container, which gas will effuse fastest? NO2 C2H6 HBr They all effuse at the same rate. Which gas molecules have the highest average kinetic energy at this temperature? HBr NO2 C2H6 They all have the same average kinetic energy.
Answer:
C2H6
Explanation:
Let us first consider the molar Masses of each gas
HBr - 80.91 g/mol
NO2 - 46.0055 g/mol
C2H6 - 30.07 g/mol
We must remember that the greater the molar mass of a gas the lesser its velocity and average kinetic energy.
Looking at the gases listed, C2H6 have the highest average kinetic energy at this temperature since it has the lowest molecular mass. This reasoning is directly derived from Graham's law of diffusion in gases.
Hence C2H6 will effuse fastest when a hole is made in the container. It also possess the greatest average kinetic energy because it has the lowest molecular mass.
2NH.
N2 + 3H2
Reactants
Product
On the balanced equation above, how many
atoms of each element are in the reactant?
N =
H =
Answer:
N=2
H=6
Explanation:
1.Balance a chemical equation in terms of moles.
2.Use the balanced equation to construct conversion factors in terms of moles.
3.Calculate moles of one substance from moles of another substance using a balanced chemical equation.
The law of conservation of matter says that matter cannot be created or destroyed. In chemical equations, the number of atoms of each element in the reactants must be the same as the number of atoms of each element in the products.
(P.s it could also be where you have to solve it in which you have to simplify it first then solve it.) like adding them all up.
Hope this is the answer. :)