It is possible to construct a triangle whose sides are 5 cm 7 cm and 11 cm because the sum of two sides are greater than three sides.
In the given question, we have to check that it is possible to construct a triangle whose sides are 5 cm 7 cm and 11 cm.
The sum of the two sides must always be greater than the third side in order to determine whether or not the given sides may form a triangle.
To check this we firstly add the 5 and 7
5 + 7 > 11
12 > 11
Now we add 7 and 11
7 + 11 > 5
18 > 5
Now we add 5 and 11
5 + 11 > 7
16 > 7
It is possible to construct a triangle whose sides are 5 cm 6 cm and 11cm because the sum of two sides are greater than third sides.
To learn more about construct a triangle link is here
brainly.com/question/29156739
#SPJ4
if the baryonic mass of our galaxy is m ≈1011 m , by what amount has the helium fraction of our galaxy been increased over its primordial value yp = 0.24?
The increase in helium fraction over its primordial value of 0.24 is about 0.06, or 30%.
The helium fraction of our galaxy has increased from its primordial value of yp = 0.24 by about 30%. This can be calculated by looking at the abundance of elements in our galaxy and comparing them to the expected values from the Big Bang nucleosynthesis (BBN) theory.
According to BBN, during the first few minutes after the Big Bang, the universe was mostly composed of hydrogen and helium, with trace amounts of other elements. As the universe expanded and cooled, these elements combined to form the stars and galaxies we see today.
Observations of our galaxy have shown that the abundance of helium is about 28% by mass, which is significantly higher than the 24% predicted by BBN. This difference is due to the fact that as stars form and evolve, they produce heavier elements through nuclear fusion reactions, including helium. This means that over time, the overall helium fraction of the galaxy increases as more and more stars are born and die.
Based on the estimated baryonic mass of our galaxy of m ≈1011 m, we can calculate that the increase in helium fraction over its primordial value of 0.24 is about 0.06, or 30%. This increase is consistent with the predictions of stellar evolution models and observations of other galaxies. Overall, the increase in helium fraction is a testament to the ongoing process of star formation and evolution in our galaxy, which has been taking place for billions of years.
To know more about nuclear fusion reactions, refer to the link below:
https://brainly.com/question/13090058#
#SPJ11
7.5-7 given x = cos and y = sin , where is an rv uniformly distributed in the range (0, 2π ), show that x and y are uncorrelated but are not independent.
Therefore, x and y for the indefinite integral are not independent, even though they are uncorrelated.
To show that x and y are uncorrelated, we need to compute their indefinite integraland show that it is zero:
Cov(x, y) = E(xy) - E(x)E(y)
We can compute E(x) and E(y) as follows:
E(x) = E(cos) = ∫(cos*f( )d ) = ∫(cos(1/2π)*d ) = 0
E(y) = E(sin) = ∫(sin*f( )d ) = ∫(sin(1/2π)*d ) = 0
where f( ) is the probability density function of , which is a uniform distribution over the range (0, 2π).
Next, we compute E(xy):
E(xy) = E(cossin) = ∫(cossinf( )d ) = ∫(cossin(1/2π)*d )
Since cos*sin is an odd function, we have:
∫(cossin(1/2π)*d ) = 0
Therefore, Cov(x, y) = E(xy) - E(x)E(y) = 0 - 0*0 = 0.
Hence, x and y are uncorrelated.
To show that x and y are not independent, we need to find P(x, y) and show that it does not factorize into P(x)P(y):
P(x, y) = P(cos, sin) = P( ) = (1/2π)
Since P(x, y) is constant over the entire range of (cos, sin), we can see that P(x, y) does not depend on either x or y, i.e., it does not factorize into P(x)P(y).
To know more about indefinite integral,
https://brainly.com/question/29133144
#SPJ11
If a box of keyboard is 3/2 cm thick then how tall will a pile of 55 such boxes be?
A pile of 55 keyboard boxes will be approximately 1983.08 cm tall.
To determine the total height of a pile of 55 keyboard boxes, we need to first calculate the height of a single box and then multiply it by 55.
Given that a single box is 3/2 cm thick, we need to know the dimensions of the box to calculate its height. If we assume that the box has a standard width and length of, say, 30 cm and 20 cm respectively, we can calculate its height using the Pythagorean theorem.
The Pythagorean theorem states that the square of the hypotenuse of a right triangle is equal to the sum of the squares of the other two sides. In this case, the hypotenuse is the height of the box, and the other two sides are the width and length.
So, we have:
height^2 = width^2 + length^2
height^2 = 30^2 + 20^2
height^2 = 900 + 400
height^2 = 1300
height = sqrt(1300)
height = 36.0555... cm (rounded to 3 decimal places)
Therefore, the height of a single keyboard box is approximately 36.056 cm.
To find the height of a pile of 55 keyboard boxes, we can simply multiply the height of a single box by 55:
height of pile = 36.056 cm x 55
height of pile = 1983.08 cm
Learn more about Pythagorean theorem at: brainly.com/question/14930619
#SPJ11
Option
1. The universal set is the set of polygons. Given that A={quadrilaterals),
B - (regular polygons). Name a member of An B', the diagonals of which
bisect each other.
A member of the set (A ∩ B') that consists of quadrilaterals with diagonals bisecting each other is the square.
Let's break down the given information step by step. The universal set is the set of all polygons. Set A is defined as the set of quadrilaterals, while set B' represents the complement of set B, which consists of regular polygons.
To find a member of the set A ∩ B', we need to identify a quadrilateral that is not a regular polygon and has diagonals that bisect each other. The square fits this description perfectly. A square is a quadrilateral with all sides equal in length and all angles equal to 90 degrees, making it a regular polygon. Additionally, in a square, the diagonals intersect at right angles and bisect each other, dividing the square into four congruent right triangles.
Therefore, the square is a member of the set (A ∩ B') in this case, satisfying the condition of having diagonals that bisect each other.
Learn more about complement here:
https://brainly.com/question/13058328
#SPJ11
Drag the tiles to the correct boxes. Not all tiles will be used.
Determine which steps are used to find the product shown. Put the steps in the order in which they would be performed.
x
2
+
7
x
+
10
x
2
+
4
x
+
4
⋅
x
2
+
3
x
+
2
x
2
+
6
x
+
5
x
+
2
1
(
x
+
5
)
(
x
+
2
)
(
x
+
2
)
(
x
+
5
)
(
x
+
5
)
(
x
+
2
)
(
x
+
5
)
(
x
+
7
)
(
x
+
1
)
(
x
+
4
)
(
x
+
1
)
⋅
(
x
+
3
)
(
x
+
1
)
(
x
+
3
)
(
x
+
2
)
(
x
+
5
)
(
x
+
2
)
⋅
(
x
+
2
)
(
x
+
5
)
(
x
+
2
)
(
x
+
5
)
(
x
+
2
)
(
x
+
2
)
⋅
(
x
+
1
)
(
x
+
2
)
(
x
+
5
)
(
x
+
1
)
(
x
+
7
)
(
x
+
1
)
(
x
+
4
)
(
x
+
2
)
↓
↓
↓
The steps are explained below.
Factorization of the given polynomial to find the product is as follows;
(x² + 3x + 2)/(x² + 6x + 5) = (x + 1)(x + 2)/(x + 1)(x + 5)
(x² + 7x + 10)/(x² + 4x + 4) = (x + 2)(x + 5)/(x + 2)(x + 2)
Expressing the product in terms of the factors
(x² + 3x + 2)/(x ^ 2 + 6x + 5) × (x² + 7x + 10)/(x² + 4x + 4) = (x + 2)(x + 5)/(x + 2)(x + 2) × (x + 1)(x + 2)/(x + 1)(x + 5)
The steps arranged in the order in which they would be performed are;
First step;
(x² + 3x + 2)/(x² + 6x + 5) × (x² + 7x + 10)/(x² + 4x + 4)
Second step (factorizing) =
(x + 1)(x + 2)/(x + 1)(x + 5) × (x + 2)(x + 5)/(x + 2)(x + 2)
Third step (dividing out common terms) =
(x+5)/(x+2) × (x+2)/(x+5)
Fourth step (rearranging and removing terms that cancel each other)
= 1
Learn more here about factorization:
brainly.com/question/12723898
#SPJ1
Consider the vector field. F(x, y, z) = 4ex sin(y), 2ey sin(z), 3ez sin(x) (a) Find the curl of the vector field. curl F = (b) Find the divergence of the vector field. div F =
For "vector-field" F(x,y,z) = 4eˣ sin(y), 2[tex]e^{y}[/tex] sin(z), 3[tex]e^{z}[/tex]sin(x);
(a) curl is -2[tex]e^{y}[/tex]cos(z)i - 3[tex]e^{z}[/tex]cos(x)j - 4eˣ cos(y)k.
(b) divergence is 4eˣ sin(y) + 2[tex]e^{y}[/tex] sin(z) + 3[tex]e^{z}[/tex]sin(x).
The vector-filed is given as : F(x,y,z) = 4eˣ sin(y), 2[tex]e^{y}[/tex] sin(z), 3[tex]e^{z}[/tex]sin(x);
Part(a) : The curl of the given vector-field can be written in determinant form as :
Curl(F) = [tex]\left|\begin{array}{ccc}i&j&k\\\frac{d}{dx} &\frac{d}{dy}&\frac{d}{dz}\\4e^{x}Siny &2e^{y}Sinz&3e^{z}Sinx\end{array}\right|[/tex];
= i{d/dy(3[tex]e^{z}[/tex]sin(x)) - d/dz(2[tex]e^{y}[/tex] sin(z))} - j{d/dx(3[tex]e^{z}[/tex]sin(x) - d/dz(4eˣ sin(y))} + k{d/dx(2[tex]e^{y}[/tex] sin(z)) - d/dy(4eˣ sin(y))};
= -2[tex]e^{y}[/tex]cos(z)i - 3[tex]e^{z}[/tex]cos(x)j - 4eˣ cos(y)k.
Part (b) : The divergence of the vector-"F" can be written as :
div.F = [i×d/dx + j×d/dy + k×d/dz]×F,
Substituting the values,
We get,
= [i×d/dx + j×d/dy + k×d/dz] . {4eˣ sin(y), 2[tex]e^{y}[/tex] sin(z), 3[tex]e^{z}[/tex]sin(x)},
= d/dx (4eˣ sin(y)) + d/dy (2[tex]e^{y}[/tex] sin(z)) + d/dz (3[tex]e^{z}[/tex]sin(x)),
On simplifying further,
We get,
Therefore, the Divergence = 4eˣ sin(y) + 2[tex]e^{y}[/tex] sin(z) + 3[tex]e^{z}[/tex]sin(x).
Learn more about Vector Filed here
https://brainly.com/question/7964566
#SPJ4
The given question is incomplete, the complete question is
Consider the vector field. F(x,y,z) = 4eˣ sin(y), 2[tex]e^{y}[/tex] sin(z), 3[tex]e^{z}[/tex]sin(x);
(a) Find the curl of the vector field.
(b) Find the divergence of the vector field.
Est-ce que ceci est un trinôme carré parfait? Montre les démarches.
a) x² +8x+64
Answer: Oui, vous pouvez le factoriser parfaitement
Step-by-step explanation:
x^2 + 8x + 64
ajouter et soustraire (b/2a)^2
x^2+8x+64+16-16
factoriser le trinôme carré parfait : x^2 + 8x + 16
(x+4)^2 + 64 - 16
réponse finale:
48 + (x+4)^2
find the limit, if it exists. (if an answer does not exist, enter dne.) lim (x, y)→(0, 0) x2 y2 x2 y2 16 − 4
The limit exists, and the limit of the function as (x, y)→(0, 0) is 0.
To find the limit of the given function as (x, y)→(0, 0), we need to consider the function and the terms you mentioned, "limit" and "exists."
The given function is:
f(x, y) = [tex](x^2 * y^2) / (x^2 * y^2 + 16 - 4)[/tex]
We want to find the limit as (x, y)→(0, 0):
lim (x, y)→(0, 0) f(x, y)
Step 1: Check if the function is continuous at (0,0)
When x = 0 and y = 0:
f(0, 0) = [tex](0^2 * 0^2) / (0^2 * 0^2 + 16 - 4)[/tex]
f(0, 0) = 0 / (0 + 12)
f(0, 0) = 0
Since the function is defined at (0, 0), it is continuous at this point.
Step 2: Analyze the limit
As (x, y) approach (0, 0), the numerator [tex](x^2 * y^2)[/tex] also approaches 0. The denominator [tex](x^2 * y^2 + 16 - 4)[/tex]approaches 12. Thus, we have:
lim (x, y)→(0, 0) f(x, y) = 0 / 12 = 0
So, the limit exists, and the limit of the function as (x, y)→(0, 0) is 0.
Learn more about limit here:
https://brainly.com/question/30532698
#SPJ11
Explain whether the given equation defines an exponential function. Give the base for each function.
y = x x
Option A. No, there is no exponent. There is no exponential function in the equation.
What is an exponential function?An exponential function is a mathematical function in the form of f(x) = a^x, where "a" is a constant base and "x" is the exponent. In this function, the variable x is usually the input, and the output value of the function is the result of the base "a" raised to the power of "x."
Exponential functions can also be written in different forms, such as f(x) = ab^x, where "a" is a constant, and "b" is the base raised to a constant power.
y = x⁵ is not an expuential function.
If y=a* It's an exponential function.
"a" is a constant and a ≠ 0
learn more about exponential function: https://brainly.com/question/2456547
#SPJ1
The complete question goes thus:
Explain whether the given equation defines an exponential function. Give the base for each function.
y= x⁵
O No, there is no exponent.
Yes, the base is 5.
O Yes, the base is x.
O No, the base is not a constant.
Solve the following linear program: Identify the optimal solution.
Minimize C = 3x + 4y
Subject to:
3x - 4y<= 12 A
x + 2y>= 4 B
x>= 1 C
x, y >= 0
The optimal solution of the given linear program is (x, y) = (2, 1).
How to solve linear programming problems?
To solve the linear program, we first plot the feasible region determined by the constraints:
3x - 4y <= 12Ax + 2y >= 4x >= 1x, y >= 0We can rewrite the second constraint as y >= (4 - Ax)/2.
Next, we plot the lines 3x - 4y = 12 and Ax + 2y = 4 - 2x and shade the appropriate regions:
3x - 4y = 12 => y <= (3/4)x - 3Ax + 2y = 4 - 2x => y >= (4 - Ax)/2We can see that the feasible region is bounded, so we can find the optimal solution by evaluating the objective function C at each of the corner points of the feasible region.
The corner points are:
(1, 0)(2, 0)(8/3, -3/4)(4, 0)(3, 1/2)(2, 1)Evaluating C at each corner point, we get:
(1, 0) => C = 3(1) + 4(0) = 3(2, 0) => C = 3(2) + 4(0) = 6(8/3, -3/4) => C = 3(8/3) + 4(-3/4) = 4(4, 0) => C = 3(4) + 4(0) = 12(3, 1/2) => C = 3(3) + 4(1/2) = 10.5(2, 1) => C = 3(2) + 4(1) = 11Thus, the optimal solution is at (2, 1) with a minimum value of C = 11.
Learn more about Linear program
brainly.com/question/30763902
#SPJ11
Plot the point whose cylindrical coordinates are given. Then find the rectangular coordinates of the point. (a) (4, ? 3 , ?3) (b) (9, -?/2, 7)
(a) To plot the point (4, π/3, -3) in cylindrical coordinates, we start by drawing the z-axis and rotating counterclockwise by π/3 to locate the projection of the point onto the xy-plane. Then we draw a circle with radius 4 centered at the projection and extend a vertical line downwards by 3 units to find the point in space.
To find the rectangular coordinates, we use the formulas x = r cos θ and y = r sin θ, where r is the radius and θ is the angle in the xy-plane measured counterclockwise from the positive x-axis. Thus, x = 4 cos(π/3) = 2 and y = 4 sin(π/3) = 2√3. The z-coordinate is already given as -3, so the rectangular coordinates of the point are (2, 2√3, -3).
(b) To plot the point (9, -π/2, 7) in cylindrical coordinates, we start by drawing the z-axis and rotating counterclockwise by π/2 to locate the projection of the point onto the xy-plane. Then we draw a circle with radius 9 centered at the projection and extend a vertical line upwards by 7 units to find the point in space.
To find the rectangular coordinates, we use the same formulas as before. However, since the angle in the xy-plane is now -π/2, we have x = 9 cos(-π/2) = 0 and y = 9 sin(-π/2) = -9. The z-coordinate is already given as 7, so the rectangular coordinates of the point are (0, -9, 7).
To know more about coordinates visit:
https://brainly.com/question/16634867
#SPJ11
The cost of producing q items is C(q) = 3000 + 18q dollars.
a) What is the marginal cost of producing the 100th item? the 1000th item?
The marginal cost to produce the 100th unit is $________________
The marginal cost to produce the 1000th unit is $_________________
b) What is the average cost of producing 100 items? 1000 items?
The average cost of producing 100 units is $_________________ per unit.
The average cost of producing 1000 units is $ _________________ per unit.
a) The marginal cost is constant and equal to $18 for all values of q.
The marginal cost to produce the 100th unit is $18.
The marginal cost to produce the 1000th unit is $18.
b) The average cost of producing 100 units is $48per unit.
The average cost of producing 1000 units is $30 per unit.
The marginal cost is the derivative of the cost function C(q) with respect to q.
We have:
C'(q) = 18
The marginal cost is constant and equal to $18 for all values of q.
The marginal cost to produce the 100th item and the 1000th item is both $18.
The average cost is the total cost divided by the number of units produced.
We have:
Average cost of producing 100 items
= C(100)/100
= (3000 + 18(100))/100
= $48 per unit
Average cost of producing 1000 items
= C(1000)/1000
= (3000 + 18(1000))/1000
= $30 per unit
For similar questions on marginal
https://brainly.com/question/12231343
#SPJ11
a) The marginal cost of 100th unit and 1000th unit is constant with $18. b) The average cost of 100th unit is $31.80 per unit and 1000th unit is $21.00 per unit.
The marginal cost is the derivative of the cost function with respect to the quantity q. Taking the derivative of C(q) = 3000 + 18q, we get: C'(q) = 18
Therefore, the marginal cost is a constant $18 per unit. It does not depend on the quantity produced. So, the marginal cost to produce the 100th item and the 1000th item is both $18.
The average cost is the total cost divided by the quantity. To find the average cost, we divide the cost function C(q) by the quantity q.
For 100 items:
Average Cost = C(100) / 100 = (3000 + 18 * 100) / 100 = 3180 / 100 = $31.80 per unit.
For 1000 items:
Average Cost = C(1000) / 1000 = (3000 + 18 * 1000) / 1000 = 21000 / 1000 = $21.00 per unit.
Therefore, the average cost of producing 100 items is $31.80 per unit, and the average cost of producing 1000 items is $21.00 per unit.
To learn more about derivative click here
brainly.com/question/29020856
#SPJ11
search of a value in binary search treee takes o(logn) true false
true - searching for a value in a binary search tree takes O(log n) time.
a binary search tree is a data structure where each node has at most two children, and the left child is always smaller than the parent while the right child is always larger. This structure allows for efficient searching, as we can compare the value we are searching for with the value of the current node and traverse either the left or right subtree accordingly. By doing so, we can eliminate half of the remaining nodes with each comparison, leading to a time complexity of O(log n).
searching for a value in a binary search tree takes O(log n) time, which is a relatively efficient algorithmic complexity. However, it's important to note that this assumes the tree is balanced and does not take into account worst-case scenarios where the tree may be heavily skewed.
To learn more about time visit:
https://brainly.com/question/31732120
#SPJ11
(1 point) for the functions f(t)=h(t) and g(t)=h(t), defined on 0≤t<[infinity], compute f∗g in two different ways:
We get two different answers for fg depending on the method used to compute the convolution. Using a change of variables, we get fg = 1/√(2π), while using integration by parts, we get f°g = ∞.
Since both functions f!(t) and g(t) are equal to h(t), their convolution f°g can be computed as follows:
f°g = ∫[0,∞] f(τ)g(t-τ) dτ
= ∫[0,∞] h(τ)h(t-τ) dτ
Method 1: Change of Variables
To compute the convolution using a change of variables, let u = t' and v = t - t'. Then, τ = u and t = u + v, and we have:
f°g = ∫∫[D] h(u)h(u+v) dudv
where D is the region of integration corresponding to the domain of u and v. Since the limits of integration are 0 to ∞ for both u and v, we can write:
f°g = ∫[0,∞] ∫[0,∞] h(u)h(u+v) dudv
Using the convolution theorem, we know that f°g is equal to the Fourier transform of H(f), where H(f) is the Fourier transform of h(t). Since h(t) is a constant function, H(f) is a Dirac delta function, given by:
H(f) = 1/√(2π) δ(f)
where δ(f) is the Dirac delta function. Therefore, we have:
f°g = Fourier^-1{H(f)} = Fourier^-1{1/√(2π) δ(f)} = 1/√(2π)
Method 2: Integration by Parts
To compute the convolution using integration by parts, we have:
f°g = ∫[0,∞] h(τ)h(t-τ) dτ
= h(t) ∫[0,∞] h(τ-t) dτ (using a change of variables)
= h(t) ∫[0,∞] h(u) du (since h is a constant function)
= h(t) [u]0^∞
= h(t) [∞ - 0]
= ∞
Learn more about integral function at https://brainly.com/question/29738170
#SPJ11
find the angle between the vectors. (first find an exact expression and then approximate to the nearest degree.) a = i − 5j, b = −5i 12j
The angle between vectors a = i - 5j and b = -5i + 12j is approximately 164 degrees to the nearest degree.
To find the angle between two vectors, we can use the dot product formula:
a · b = |a| |b| cosθ
where a · b is the dot product of vectors a and b, |a| and |b| are the magnitudes of vectors a and b respectively, and θ is the angle between the two vectors.
First, we need to calculate the magnitudes of vectors a and b:
[tex]|a| = sqrt(1^2 + (-5)^2) = sqrt(26)|b| = sqrt((-5)^2 + 12^2) = 13[/tex]
Next, we need to calculate the dot product of vectors a and b:
a · b = (1)(-5) + (-5)(12) = -65
Now we can substitute these values into the dot product formula to solve for the angle θ:
-65 = sqrt(26) * 13 * cosθ
cosθ = -65 / (sqrt(26) * 13) = -0.9765
Taking the inverse cosine of -0.9765, we get:
θ = 164.43 degrees
Therefore, the angle between vectors a = i - 5j and b = -5i + 12j is approximately 164 degrees to the nearest degree.
To know more about vector refer to-
https://brainly.com/question/29740341
#SPJ11
Suppose 15% of people do not own a calculator, 40% of people own one calculator, 40% own two calculators, and the remaining 5% own three calculators. Let X be the number of calculators that a randomly selected person owns. I = number of calculators 0 P(X = 1) = f(x) 0.15 0.40 0.40 0.05 (a) (3 points) What is the probability a person owns fewer than 3 calculators? (b) (3 points) What is the expected number of calculators that a person owns? (C) (3 points) What is E[X?? (d) (4 points) What is the standard deviation for the number of calculators that a person owns?
(a) The probability that a person owns fewer than 3 calculators is 0.95.
(b) The expected number of calculators that a person owns is 1.4.
(c) The expected value of X (the number of calculators a person owns) is 1.4.
(d) The standard deviation for the number of calculators a person owns is 0.8.
(a) To find the probability that a person owns fewer than 3 calculators, we need to calculate the cumulative probability up to X = 2. This includes the probabilities P(X = 0), P(X = 1), and P(X = 2). Adding these probabilities together, we have 0.15 + 0.40 + 0.40 = 0.95. Therefore, the probability that a person owns fewer than 3 calculators is 0.95.
(b) To find the expected number of calculators that a person owns, we multiply each possible number of calculators by its respective probability and sum them up. So, we have (0 × 0.15) + (1 ×0.40) + (2 × 0.40) + (3 × 0.05) = 1.4. Therefore, the expected number of calculators that a person owns is 1.4.
(c) The expected value of X, denoted E[X], represents the average number of calculators that a person owns. In this case, we have already calculated E[X] in part (b), which is 1.4.
(d) The standard deviation of X, denoted as σX, measures the spread or variability of the number of calculators a person owns. To calculate it, we need to find the variance of X and then take the square root. The variance of X is calculated as the sum of each value of (X - E[X]) squared multiplied by its respective probability. So, we have [tex](0 - 1.4)^{2}[/tex] ×0.15 + [tex](1 - 1.4)^{2}[/tex]× 0.40 +[tex](2 - 1.4)^{2}[/tex] × 0.40 + [tex](3 - 1.4)^{2}[/tex] × 0.05 = 0.8. Taking the square root of the variance, we find that the standard deviation for the number of calculators a person owns is 0.8.
Learn more about standard deviation here:
https://brainly.com/question/13498201
#SPJ11
if ax= b has two solutions x1 and x2, find two solutions to ax= 0
If ax = b has two solutions x1 and x2, the two solutions to ax = 0 can be obtained by setting b = 0. The solutions to ax = 0 are x1 = 0 and x2 = 0.
How we find two solutions to the equation ax = 0?If the equation ax = b has two solutions x1 and x2, it means that both x1 and x2 satisfy the equation ax = b.
when we have ax = 0, we want to find values of x that make the equation equal to zero.
Since any number multiplied by zero is zero, we can choose x1 = 0 and x2 = 0 as two solutions to the equation ax = 0.
By substituting these values into the equation, we have a(0) = 0 and a(0) = 0, which are both true statements.
x1 = 0 and x2 = 0 are two solutions to the equation ax = 0.
Learn more about x1 and x2
brainly.com/question/24085716
#SPJ11
Consider the damped mass-spring system for mass of 0.7 kg, spring constant 8.7 N/m, damping 1.54 kg/s and an oscillating force 3.3 cos(wt) Newtons. That is, 0.72" + 1.54x' +8.7% = 3.3 cos(wt). What positive angular frequency w leads to maximum practical resonance? = w= 3.16 help (numbers) the steady state solution when the What is the maximum displacement of the mass we are at practical resonance: = CW) =
Plugging in the value of w = 3.156 rad/s, we can calculate the maximum Displacement.
To find the positive angular frequency w that leads to maximum practical resonance, we can solve the given equation for steady-state response by setting the input force equal to the damping force.
The given equation represents a damped mass-spring system with an oscillating force. The equation of motion for this system can be written as:0.72x'' + 1.54x' + 8.7x = 3.3cos(wt)
To determine the angular frequency w that leads to maximum practical resonance, we need to find the value of w that results in the maximum amplitude of the steady-state response.
The steady-state solution for this equation can be expressed as:
x(t) = X*cos(wt - φ)
where X is the amplitude and φ is the phase angle.
To find the maximum displacement (maximum amplitude), we can take the derivative of the steady-state solution with respect to time and set it equal to zero:
dx(t)/dt = -Xwsin(wt - φ) = 0
This condition implies that sin(wt - φ) = 0, which means wt - φ must be an integer multiple of π.
Since we are interested in finding the maximum practical resonance, we want the amplitude to be as large as possible. This occurs when the angular frequency w is equal to the natural frequency of the system.
The natural frequency of the system can be calculated using the formula:
ωn = sqrt(k/m)where k is the spring constant and m is the mass.
Given that the mass is 0.7 kg and the spring constant is 8.7 N/m, we can calculate the natural frequency:
ωn = sqrt(8.7 / 0.7) ≈ 3.156 rad/s
Therefore, the positive angular frequency w that leads to maximum practical resonance is approximately 3.156 rad/s.
To calculate the maximum displacement (maximum amplitude) of the mass at practical resonance, we need to find the amplitude X. Given the steady-state equation: x(t) = X*cos(wt - φ)
We know that at practical resonance, the input force is equal to the damping force:3.3cos(wt) = 1.54x' + 8.7x
By solving this equation for the amplitude X, we can find the maximum displacement: X = (3.3 / sqrt((8.7 - w^2)^2 + (1.54 * w)^2))
Plugging in the value of w = 3.156 rad/s, we can calculate the maximum displacement.
To know more about Displacement.
https://brainly.com/question/1581502
#SPJ11
The maximum displacement is:x_max = 0.695 cos(-0.298) = 0.646 m (approx)
The steady-state solution for the given damped mass-spring system is of the form:
x(t) = A cos(wt - phi)
where A is the amplitude of oscillation, w is the angular frequency, and phi is the phase angle.
To find the angular frequency that leads to maximum practical resonance, we need to find the value of w that makes the amplitude A as large as possible. The amplitude A is given by:
A = F0 / sqrt((k - mw^2)^2 + (cw)^2)
where F0 is the amplitude of the oscillating force, k is the spring constant, m is the mass, and c is the damping coefficient.
To maximize A, we need to minimize the denominator of the above expression. We can write the denominator as:
(k - mw^2)^2 + (cw)^2 = k^2 - 2kmw^2 + m^2w^4 + c^2w^2
Taking the derivative of the above expression with respect to w and setting it to zero, we get:
-4kmw + 2m^2w^3 + 2cw = 0
Simplifying and solving for w, we get:
w = sqrt(k/m) / sqrt(2) = sqrt(8.7/0.7) / sqrt(2) = 3.16 rad/s (approx)
This is the value of w that leads to maximum practical resonance.
To find the steady-state solution at practical resonance, we can substitute w = 3.16 rad/s into the equation of motion:
0.7x'' + 1.54x' + 8.7x = 3.3 cos(3.16t)
The steady-state solution is of the form:
x(t) = A cos(3.16t - phi)
where A and phi can be determined by matching coefficients with the right-hand side of the above equation. We can write:
x(t) = Acos(3.16t - phi) = Re[Ae^(i(3.16t - phi))]
where Re denotes the real part of a complex number. The amplitude A can be found from:
A = F0 / sqrt((k - mw^2)^2 + (cw)^2) = 3.3 / sqrt((8.7 - 0.7(3.16)^2)^2 + (1.54(3.16))^2) = 0.695
The maximum displacement occurs when cos(3.16t - phi) = 1, which happens at t = 0. Therefore, the maximum displacement is:
x_max = A cos(-phi) = 0.695 cos(-phi)
The phase angle phi can be found from:
tan(phi) = cw / (k - mw^2) = 1.54 / (8.7 - 0.7(3.16)^2) = 0.308
phi = atan(0.308) = 0.298 rad
Know more about maximum displacement here:
https://brainly.com/question/14150511
#SPJ11
How many arrangements are there of TAMELY with either T before A, or A before M, or M before E? By "before," we mean anywhere before, not just immediaiely before.
There are 720 possible arrangements of the word "TAMELY" since it has 6 distinct letters (6! = 6×5×4×3×2×1 = 720). To find the arrangements with given condition, we can use complementary counting.
To find the number of arrangements of TAMELY with T before A, or A before M, or M before E, we need to break this down into cases.
Case 1: T before A
We can start by fixing T in the first position. The remaining letters can be arranged in 4! = 24 ways. Therefore, there are 24 arrangements where T is before A.
Case 2: A before M
We can start by fixing A in the second position. The remaining letters can be arranged in 3! = 6 ways. Therefore, there are 6 arrangements where A is before M.
Case 3: M before E
We can start by fixing M in the fourth position. The remaining letters can be arranged in 2! = 2 ways. Therefore, there are 2 arrangements where M is before E.
Now, we need to add up the number of arrangements in each case. However, we have counted some arrangements more than once. Specifically, we have counted the arrangement TAMELY twice (once in case 1 and once in case 2). Therefore, we need to subtract 1 from our total count.
Total number of arrangements with T before A, or A before M, or M before E = 24 + 6 + 2 - 1 = 31.
Therefore, there are 31 arrangements of TAMELY with either T before A, or A before M, or M before E, anywhere before.
Learn more about arrangements here:
https://brainly.com/question/14855400
#SPJ11
List five vectors in span {1 , 2}. for each vector, show the weights on 1 and 2 used to generate the vector and list the three entries of the vector. do not make a sketch
Answer:
The span {1, 2} consists of all possible linear combinations of the vectors [1, 0] and [0, 2]. Therefore, any vector in this span can be written as:
a[1, 0] + b[0, 2] = [a, 2b]
Here are five vectors in the span {1, 2} along with their corresponding weights on 1 and 2:
[2, 4] = 2[1, 0] + 2[0, 2]
[3, -6] = 3[1, 0] - 3[0, 2]
[-5, 10] = -5[1, 0] + 5[0, 2]
[0, 0] = 0[1, 0] + 0[0, 2]
[1, 1] = 1[1, 0] + 0.5[0, 2]
To know more about linear refer here
https://brainly.com/question/15830007#
#SPJ11
An SRS of size 10 is drawn from a population that has a normal distribution. The sample has a mean of 111 and a standard deviation of 4.
Give the standard error of the mean___.
The standard error of the mean is 1.27. The standard error of the mean (SEM) measures the variability or dispersion of sample means around the population mean.
It provides an estimate of how much the sample mean is likely to deviate from the true population mean. The SEM is calculated using the formula:
SEM = σ / sqrt(n),
where σ is the population standard deviation and n is the sample size.
In this case, we are given that the sample size (n) is 10 and the sample has a mean of 111 and a standard deviation of 4. Since we do not have the population standard deviation (σ), we can estimate it using the sample standard deviation (s). However, if the sample size is relatively small (typically less than 30) and the population is assumed to be normally distributed, it is recommended to use the t-distribution for the estimation. But in this case, since we are given that the population has a normal distribution and the sample size is 10, we can use the sample standard deviation as an estimate for the population standard deviation.
Therefore, we can substitute the sample standard deviation (s) for the population standard deviation (σ) in the SEM formula:
SEM = s / sqrt(n).
Given that the sample standard deviation (s) is 4 and the sample size (n) is 10, we can calculate the SEM as follows:
SEM = 4 / sqrt(10) ≈ 1.27.
Thus, the standard error of the mean is approximately 1.27.
The SEM is an important measure as it helps us understand the precision of the sample mean estimate. A smaller SEM indicates that the sample mean is a more precise estimate of the population mean, while a larger SEM suggests greater uncertainty and more variability in the sample mean. It is used in hypothesis testing, confidence intervals, and other statistical analyses to make inferences about the population based on sample data.
To learn more about standard error, click here: brainly.com/question/29456921
#SPJ11
In ΔGHI, the measure of ∠I=90°, the measure of ∠G=82°, and GH = 3. 4 feet. Find the length of HI to the nearest tenth of a foot
In triangle ΔGHI, with ∠I measuring 90° and ∠G measuring 82°, and GH measuring 3.4 feet, the length of HI is 24.2 feet.
To find the length of HI, we can use the trigonometric function tangent (tan). In a right triangle, the tangent of an angle is equal to the ratio of the length of the side opposite the angle to the length of the side adjacent to it. In this case, the side opposite ∠G is HI, and the side adjacent to ∠G is GH. Therefore, we can set up the equation: tan(82°) = HI / GH.
Rearranging the equation to solve for HI, we have: HI = GH * tan(82°). Plugging in the given values, we get: HI = 3.4 * tan(82°). Using a calculator, we find that tan(82°) is approximately 7.115. Multiplying 3.4 by 7.115, we find that HI is approximately 24.161 feet. Rounded to the nearest tenth of a foot, the length of HI is 24.2 feet.
Learn more about tangent here:
https://brainly.com/question/10053881
#SPJ11
the system x′ = 2(x −y)y, y′ = x y −2, has an equilbrium point at (1,1). this equilibrium point is a(n)
The equilibrium point (1,1) in the system x′ = 2(x − y)y, y′ = xy - 2 is a(n) stable spiral.
To determine the type of equilibrium point, we first linearize the system around the point (1,1) by finding the Jacobian matrix:
J(x,y) = | ∂x′/∂x ∂x′/∂y | = | 2y -2y |
| ∂y′/∂x ∂y′/∂y | | y x |
Evaluate the Jacobian at the equilibrium point (1,1):
J(1,1) = | 2 -2 |
| 1 1 |
Next, find the eigenvalues of the Jacobian matrix. The characteristic equation is:
(2 - λ)(1 - λ) - (-2)(1) = λ² - 3λ + 4 = 0
Solve for the eigenvalues:
λ₁ = (3 + √7i)/2, λ₂ = (3 - √7i)/2
Since the eigenvalues have positive real parts and nonzero imaginary parts, the equilibrium point at (1,1) is a stable spiral. This means that trajectories near the point spiral towards it over time.
To know more about Jacobian matrix click on below link:
https://brainly.com/question/31396330#
#SPJ11
what correlation is obtained when the pearson correlation is computed for data that have been converted to ranks? (35) the spearman correlation. the point-biserial correlation. the phi coefficient. it is still called a pearson correlation.
When data is converted to ranks, the correlation obtained is the Spearman correlation. It assesses the strength and direction of the monotonic relationship between two variables, meaning that it can capture non-linear relationships as well.
The Pearson correlation measures the strength and direction of the linear relationship between two variables, assuming they have a normal distribution. However, when data is not normally distributed, it may be converted to ranks, which allows for a non-parametric correlation measure to be used. The Spearman correlation is a non-parametric measure of correlation that uses the ranks of the data rather than the actual values.
In addition to the Spearman correlation, there are other non-parametric correlation measures that can be used when data is converted to ranks. The point-biserial correlation is used when one variable is dichotomous and the other is continuous and ranked. The phi coefficient is used when both variables are dichotomous. However, even when data is converted to ranks, the correlation measure is still commonly referred to as the Pearson correlation, as it is the same formula used with ranked data as with non-ranked data. However, it is important to recognize that the interpretation and assumptions of the correlation measure may differ depending on the type of data used.
To know more about correlation visit :-
https://brainly.com/question/30116167
#SPJ11
Mrs. Cabana wants to cover the walkway around her swimming pool with tile. Determine how many square feet of tile she will need to cover the shaded portion of the diagram
Answer:
v
Step-by-step explanation:
Let X be the winnings of a gambler. Let p(i)=P(X=i)
and suppose that
p(0)=1/3;p(1)=p(−1)=13/55;p(2)=p(−2)=1/11;p(3)=p(−3)=1/165
.
Compute the conditional probability that the gambler wins i
, i=1,2,3
given that he wins a positive amount.
The conditional probabilities that the gambler wins 1, 2, or 3 given that he wins a positive amount are 13/6, 5/2, and 1/2, respectively.
We can use Bayes' theorem to compute the conditional probabilities. Let A be the event that the gambler wins a positive amount, i.e., A = {1,2,3}, and let B be the event that the gambler wins i, i = 1,2,3. Then, we have:
P(B|A) = P(A|B)P(B)/P(A)
We can compute the probabilities as follows:
P(A) = P(X > 0) = p(1) + p(2) + p(3) = 13/55 + 1/11 + 1/165 = 6/55
P(B) = p(i) for i = 1,2,3
P(A|B) = P(X > 0|X = i) = P(X > 0 and X = i)/P(X = i) = p(i)/[2p(i) + p(i-1) + p(i+1)]
Therefore, we have:
P(B|A) = P(X = i|X > 0) = P(X > 0|X = i)P(X = i)/P(X > 0) = P(A|B)P(B)/P(A)
Computing each of the conditional probabilities yields:
P(1|A) = P(X = 1|X > 0) = (13/55)/(6/55) = 13/6
P(2|A) = P(X = 2|X > 0) = (1/11)/(6/55) = 5/2
P(3|A) = P(X = 3|X > 0) = (1/165)/(6/55) = 1/2
Therefore, the conditional probabilities that the gambler wins 1, 2, or 3 given that he wins a positive amount are 13/6, 5/2, and 1/2, respectively.
To know more about Bayes' theorem refer to-
https://brainly.com/question/29598596
#SPJ11
The equation 4 cos x - 8 sin x cos x = 0 has two solutions in the interval [0, pi/2]. What are they? Smaller solution x = pi Larger solution x = pi
x = 5pi/6 is not in the interval [0, pi/2]
Starting with the given equation:
4 cos x - 8 sin x cos x = 0
We can factor out 4 cos x:
4 cos x (1 - 2 sin x) = 0
So either cos x = 0 or (1 - 2 sin x) = 0.
If cos x = 0, then x = pi/2 since we're only considering the interval [0, pi/2].
If 1 - 2 sin x = 0, then sin x = 1/2, which means x = pi/6 or x = 5pi/6 in the interval [0, pi/2].
So the two solutions in the interval [0, pi/2] are x = pi/2 and x = pi/6.
That x = 5pi/6 is not in the interval [0, pi/2].
for such more question on interval
https://brainly.com/question/22008756
#SPJ11
The given equation is 4 cos x - 8 sin x cos x = 0. To find the solutions in the interval [0, pi/2], we need to solve for x.
Find the solutions within the given interval. Equation: 4 cos x - 8 sin x cos x = 0
First, let's factor out the common term, which is cos x:
cos x (4 - 8 sin x) = 0
Now, we have two cases to find the solutions:
Case 1: cos x = 0
In the interval [0, π/2], cos x is never equal to 0, so there is no solution for this case.
Case 2: 4 - 8 sin x = 0
Now, we'll solve for sin x:
8 sin x = 4
sin x = 4/8
sin x = 1/2
We know that in the interval [0, π/2], sin x = 1/2 has one solution, which is x = π/6.
So, in the given interval [0, π/2], the equation has only one solution: x = π/6.
To learn more about factor : brainly.com/question/14209188
#SPJ11
A panel for a political forum is made up of 11 people from three parties, all seated in a row. The panel consists of 5 Democrats, 5 Socialists, and 1 Independent. In how many distinct orders can they be seated if two people of the same party are considered identical (not distinct)?
There are 252 distinct orders in which the panel can be seated if two people of the same party are considered identical.
We can solve this problem by first counting the number of distinct ways to arrange the Democrats and Socialists, and then multiplying by the number of ways to arrange the Independent in the remaining spots.
First, let's consider the Democrats and Socialists. We need to find the number of distinct ways to arrange 5 D's and 5 S's, where two people of the same party are considered identical. This is equivalent to finding the number of distinct ways to arrange the letters in the word "DDDDSSSSSS", which is given by:
10
!
5
!
5
!
=
252
5!5!
10!
=252
This is the number of distinct ways to arrange the Democrats and Socialists. Next, we need to arrange the Independent in the remaining spot. There is only 1 Independent, so there is only 1 way to do this.
Therefore, the total number of distinct orders is:
252
×
1
=
252
252×1=252
Learn more about equivalent at: brainly.com/question/25197597
#SPJ11
Which of the following is not one of the things the relative frequency (Rf) of z-scores allows us to calculate for corresponding raw scores? Remember, what is true for the z-score is also true for its corresponding individual raw or sample to mean score.a) Factors related to cause and effectb) Probabilityc) Comparison against other variables (e.g. IQ vs. SAT scores)d) Relative frequency
Factors related to cause and effect is not one of the things the relative frequency (Rf) of z-scores allows us to calculate for corresponding raw scores. The correct answer is a) Factors related to cause and effect.
The relative frequency (Rf) of z-scores is a statistical tool that calculates the probability of obtaining a certain raw score or a score more extreme than that. It allows for inferences to be made about the population from which the sample was drawn and for comparisons to be made between variables. However, Rf does not provide information on factors related to cause and effect, as it cannot establish cause-and-effect relationships between variables. It is useful in analyzing data in the context of a normal distribution and calculating the frequency of occurrence of certain scores in a given population. Therefore the correct answer is a) Factors related to cause and effect.
Learn more about relative frequency (Rf) :
https://brainly.com/question/29267583
#SPJ11
Plot StartRoot 0. 9 EndRoot on the number line. Which inequalities are true? Check all that apply. 0 < StartRoot 0. 9 EndRoot StartRoot 0. 9 EndRoot < 0. 9 StartRoot 0. 9 EndRoot < 1 StartRoot 0. 9 EndRoot > StartRoot 1 EndRoot 0. 9 > StartRoot 0. 9 EndRoot< 1.
The true inequalities in the number line are:
0 < √0.9, √0.9 < 0.9
√0.9 < 1, 0.9 > √0.9 < 1
To plot √0.9 on the number line, we need to find its approximate value.
√0.9 is between 0 and 1 because 0.9 is greater than 0 but less than 1. However, it is closer to 1 than 0.
So, we can represent √0.9 as a point on the number line between 0 and 1, closer to 1.
Now let's analyze the given inequalities:
0 < √0.9: This inequality is true because √0.9 is greater than 0.
√0.9 < 0.9: This inequality is true because √0.9 is less than 0.9.
√0.9 < 1: This inequality is true because √0.9 is less than 1.
√0.9 > √1: This inequality is false because √0.9 is less than √1.
0.9 > √0.9 < 1: This inequality is true because √0.9 is less than 1 and greater than 0.9.
So, the true inequalities are:
0 < √0.9
√0.9 < 0.9
√0.9 < 1
0.9 > √0.9 < 1
Learn more about inequality here:
https://brainly.com/question/28823603
#SPJ11