estimate the heat required to heat a 0.19 −kg apple from 12 ∘c to 33 ∘c . (assume the apple is mostly water.)

The mass percent (m/m) of a solution prepared by dissolving 42.97 g of NaCl in 164.0 g of H₂O is 20.8%.

To calculate the mass percent of a solution, we need to divide the mass of the solute by the total mass of the solution (solute + solvent) and then multiply by 100%. In this case, the mass of NaCl is 42.97 g and the mass of H₂O is 164.0 g, so the total mass of the solution is 42.97 g + 164.0 g = 206.97 g.

The mass percent (m/m) of the solution is then:

mass of solute / total mass of solution x 100%

= 42.97 g / 206.97 g x 100%

= 0.208 x 100%

= 20.8%

Therefore, the mass percent of the solution prepared by dissolving 42.97 g of NaCl in 164.0 g of H₂O is 20.8%.

To know more about mass refer here:

https://brainly.com/question/19694949#

#SPJ11

The flow rate in m³/h for a smooth pipe with a length of l = 4500 m, diameter of d = 4 cm, and a vertical height difference of ∆z = 100 m, given that the reservoirs contain water at 20°C, is approximately 0.073 m³/h.

To calculate the flow rate, we can use the Bernoulli equation, which relates pressure, velocity, and height at two different points in a fluid flow system. Neglecting minor losses, the Bernoulli equation for the two reservoirs can be written as:

P₁/ρ + v₁²/2g + z₁ = P₂/ρ + v₂²/2g + z₂

where P is pressure, ρ is density, v is velocity, g is the acceleration due to gravity, and z is height. At both reservoirs, the pressure is atmospheric, and the velocity is zero, so the equation simplifies to:

z₁ + v₂²/2g = z₂

we can solve for the velocity v₂ using the equation:

v₂ = √(2g(∆z))

where ∆z is the height difference between the two reservoirs. Substituting the given values, we get:

v₂ = √(2 × 9.81 m/s² × 100 m) = 44.29 m/s

Next, we can use the continuity equation, which states that the mass flow rate is constant at every point in a fluid flow system. The equation can be written as:

Q = Av = πd²/4 × v

where Q is the volumetric flow rate, A is the cross-sectional area of the pipe, and d is the diameter of the pipe. Substituting the given values, we get:

Q = π(4 cm)²/4 × 44.29 m/s × 3.6 × 10⁻³ = 0.073 m³/h.

learn more about Bernoulli equation here:

https://brainly.com/question/31047017

#SPJ11

A. The frequencies of the first two harmonics are approximately 1433.33 Hz and 2866.67 Hz. B. The corresponding sound wavelengths for the first two harmonics are approximately 24.0 cm and 12.0 cm.

Part A: The auditory canal acts as a resonant tube, and it can resonate at specific frequencies called harmonics. To determine the frequencies of the first two harmonics, we need to consider the length of the auditory canal. Given that the length of the canal is approximately 2.4 cm and the speed of sound in air is 344 m/s, we can use the formula for the fundamental frequency of a closed-closed tube:

f1 = (v / 4L) = (344 m/s / 4 * 0.024 m) ≈ 1433.33 Hz

To find the frequency of the second harmonic, we multiply the fundamental frequency by 2:

f2 = 2 * f1 ≈ 2866.67 Hz

Part B: To find the corresponding sound wavelengths for the first two harmonics, we can use the formula for the wavelength of a sound wave:

λ = v / f

For the first harmonic (f1 ≈ 1433.33 Hz):

λ1 = (344 m/s) / (1433.33 Hz) ≈ 0.240 m ≈ 24.0 cm

For the second harmonic (f2 ≈ 2866.67 Hz):

λ2 = (344 m/s) / (2866.67 Hz) ≈ 0.120 m ≈ 12.0 cm

Learn more about frequencies here

https://brainly.com/question/15296916

#SPJ11

If the spring constant of the scale is 2160 N/m, the mass of the catfish is approximately 0.455 kg.

To find the mass of the catfish, we need to use the formula for the period of an oscillating spring, which is:
T = 2π√(m/k)
Where T is the period, m is the mass, and k is the spring constant. Rearranging this formula, we get:
m = (T^2 * k)/(4π^2)

Substituting the given values, we get:
m = (0.207^2 * 2160)/(4π^2)
m ≈ 0.455 kg

Therefore, the mass of the catfish is approximately 0.455 kg. This calculation assumes that the spring scale is ideal and there is no friction or damping in the system. It is important to note that the accuracy of the measurement can be affected by these factors and may need to be taken into account for more precise measurements.

For more question on mass

https://brainly.com/question/86444

#SPJ11

To find the mass of the catfish, we need to use the equation T=2π√(m/k), where T is the period, m is the mass, and k is the spring constant. We are given T=0.207 s and k=2160 N/m, so we can solve for m. Rearranging the equation, we get m=(T^2*k)/(4π^2). Plugging in the values, we get m=(0.207^2*2160)/(4π^2)=1.05 kg.

Therefore, the mass of the catfish is approximately 1.05 kg. The spring constant of the scale is important because it determines how much the spring will stretch when a force is applied. In this case, the oscillation of the spring is directly related to the mass of the catfish and the spring constant of the scale. It is a constant that is unique to the spring and is necessary to determine the mass accurately.

To learn more about mass click here: brainly.com/question/19694949

#SPJ11

Most astronomers believe we are living in the "age of exploration" for astronomy due to significant advancements in technology, observational capabilities, and our understanding of the universe.

In the last 60 years, several explorations have taken place, revolutionizing our knowledge of the cosmos. One major exploration has been the launch and utilization of space telescopes. Instruments like the Hubble Space Telescope, launched in 1990, have provided breathtaking images and invaluable data, expanding our understanding of distant galaxies, stellar evolution, and the age of the universe. Additionally, the Kepler Space Telescope, launched in 2009, has discovered thousands of exoplanets, leading to groundbreaking insights into planetary systems and the potential for life beyond Earth. Advancements in ground-based observatories have also contributed to the age of exploration. Large-scale telescopes equipped with advanced detectors and adaptive optics technology have enabled astronomers to observe celestial objects with remarkable clarity and detail. These observatories have played a vital role in studying cosmic phenomena, such as black holes, pulsars, supernovae, and the cosmic microwave background radiation. Moreover, significant discoveries have been made in the field of cosmology. The development of precise measurements, such as the cosmic microwave background radiation and the accelerated expansion of the universe, has deepened our understanding of its origins and evolution. The detection of gravitational waves, first observed in 2015, has opened a new window for studying the universe, providing insights into phenomena like neutron star mergers and black hole dynamics.

Learn more about "age of exploration" for astronomy here:

https://brainly.com/question/5165144

#SPJ11

Scatterplot E corresponds to the highest R2-value.R2-value is a measure of how well the data points fit a linear regression model. The closer the R2-value is to 1, the better the fit of the model.Upon examining the scatterplots.

It appears that Scatterplot E has the tightest cluster of data points and the most linear relationship between the two variables, indicating a strong correlation and a high R2-value. Therefore, Scatterplot E corresponds to the highest R2-value among the four scatterplots. To determine which of the four scatterplots corresponds to the highest R²-value, please follow these steps:

You need to closely examine each scatterplot and identify the one with the closest fit to a linear regression line.The R²-value represents the proportion of the variance in the dependent variable that is predictable from the independent variable(s). A higher R²-value indicates a better fit of the data points to the regression line.
To know more about measure visit

https://brainly.com/question/4725561

#SPJ11

The minimum diameter of the nylon string is approximately 29.6 mm.

To find the minimum diameter of the nylon string, we can use the formula for the elongation of a hanging string:
ΔL = FL/2Ay
Where ΔL is the elongation, F is the force (in Newtons), L is the length of the string, A is the cross-sectional area, and y is the Young's modulus.
First, we need to convert the load of 71.9 kg to Newtons:
F = m*g = (71.9 kg)*(9.81 m/s^2) = 705.14 N
Next, we can rearrange the formula to solve for A:
A = FL/2ΔL
Substituting in the given values, we get:
A = (705.14 N)*(49.5 m)/(2*(0.0149 m)*(3.51*10^9 N/m^2))
A = 5.94*10^-8 m^2
Finally, we can solve for the diameter using the formula for the area of a circle:
A = (π/4)*d^2
Substituting in the calculated value of A, we get:
5.94*10^-8 m^2 = (π/4)*d^2
Solving for d, we get:
d = √(4*(5.94*10^-8 m^2)/π)
d = 3.88*10^-4 m
Therefore, the minimum diameter of the nylon string is 3.88*10^-4 m.

To know more about diameter visit :-

https://brainly.com/question/5501950

#SPJ11

The total mass will be ∫[-6,6] (1.7 + 2.2x) sqrt[tex](36 - x^2)[/tex] dx.

To determine the total mass of the plate we must integrate the areal density over the surface area of ​​the entire plate.

The equation of the semicircle can be written as [tex]x^2 + y^2 = 6^2,[/tex] or y = sqrt[tex](36 - x^2).[/tex]

The formula for the circumference of a semicircle can be used to determine the surface area, and this can be integrated along the x-axis as follows:

C = πr = π(6) = 6π

We integral for the total mass:

M = ∫[a,b] ρ(x) dA

where

ρ(x) is the area density given by ρ(x) = 1.7 + 2.2x and dA which is an infinitesimal area element.

The x-values ​​of -6 and 6 at which the semicircle approaches the x-axis serve as the limits of integration [a, b].

M = ∫[-6,6] (1.7 + 2.2x) dA

The derivative of y with respect to x, multiplied by an infinitesimal width dx, can now be used to express dA:

dA = y dx = sqrt(36 - x^2) dx

So, M = ∫[-6,6] (1.7 + 2.2x) sqrt[tex](36 - x^2)[/tex] dx

Therefore, the total mass will be ∫[-6,6] (1.7 + 2.2x) sqrt[tex](36 - x^2)[/tex] dx

Learn more about total mass, here:

https://brainly.com/question/32184743

#SPJ12

Answer:

N = N0 / 4

After 2 half-lives 1/4 of the original N0 will be present

250 - number of parent atoms left

750 - number of daughter atoms present

The correct option is a. The work done by the gas is 1.2 x 10^{4} J.

To calculate the work done by an ideal gas during a constant pressure expansion, we use the formula W = P * ΔV, where W represents work, P is the constant pressure, and ΔV is the change in volume. In this case, P = 4 x 10^{5} Pa, and ΔV = 0.050 m^{3} - 0.020 m^{3} = 0.030 m^{3}. Plugging these values into the formula, we get W = (4 x 10^{5} Pa) * (0.030 m^{3}), which results in W = 1.2 x 10^{4} J. Therefore, the work done by the gas is 1.2 x 10^{4} J, and the correct option is a.

Calculation steps:
1. Determine ΔV: ΔV = 0.050 m^{3} - 0.020 m^{3} = 0.030 m^{3}
2. Apply the formula W = P * ΔV: W = (4 x 10^{5} Pa) * (0.030 m^{3})
3. Calculate W: W = 1.2 x 10^{4} J

To know more about the work done visit:

https://brainly.com/question/30159785

#SPJ11

According to the payoff matrix in Table 17-21, if John chooses to turn, Paul's best response would be to drive straight to get a payoff of 20, as it is greater than the payoff of 10 he would get if he also chose to turn. Therefore, the answer would be option (b) Drive Straight, 20.

This scenario illustrates the concept of Nash equilibrium in game theory, where each player chooses their best response given the other player's action. In this case, if John chooses to turn, Paul's best response is to drive straight, and vice versa. This results in a Nash equilibrium where neither player can improve their payoff by unilaterally changing their strategy.

It is important to note that the Nash equilibrium may not always result in the most desirable outcome for both players, as it only ensures that neither player has an incentive to deviate from their current strategy. In this case, both players may have been better off if they both chose to turn, resulting in a combined payoff of 15, which is greater than the combined payoff of 30 they get by both driving straight. However, without communication or a binding agreement between the players, the Nash equilibrium is the most likely outcome.

Learn more about Game Theory :

https://brainly.com/question/17515037

#SPJ11

The rotational kinetic energy of the earth is approximately 2.14 x 10^29 joules.

The rotational kinetic energy of the earth can be calculated using the formula:

KE = (1/2) I w^2

Where KE is the kinetic energy, I is the moment of inertia, and w is the angular velocity.

Assuming the earth is a uniform sphere, the moment of inertia can be calculated using the formula:

I = (2/5) m R^2

Where m is the mass of the earth and R is the radius.

According to the data inside the back cover of the book, the mass of the earth is approximately 5.97 x 10^24 kg and the radius is approximately 6.37 x 10^6 m.

Therefore,

I = (2/5) (5.97 x 10^24 kg) (6.37 x 10^6 m)^2
I = 9.98 x 10^37 kg m^2

The angular velocity of the earth can be calculated as the circumference of the earth divided by the length of a day:

w = (2 pi R) / T

Where T is the length of a day, which is approximately 24 hours or 86,400 seconds.

Therefore,

w = (2 pi) (6.37 x 10^6 m) / (86,400 s)
w = 7.29 x 10^-5 rad/s

Now we can calculate the rotational kinetic energy:

KE = (1/2) I w^2
KE = (1/2) (9.98 x 10^37 kg m^2) (7.29 x 10^-5 rad/s)^2
KE = 2.14 x 10^29 J

Learn more about kinetic energy here:-

https://brainly.com/question/999862

#SPJ11

The order of the differential equation that models the free vibrations of a spring-mass-damper system is 2.

This is because the motion of the system can be described by Newton's second law of motion, which relates the force acting on an object to its acceleration.

In the case of a spring-mass-damper system, the force is the sum of the forces due to the spring, the mass, and the damper, and the acceleration is the second derivative of the position with respect to time.

Therefore, the resulting differential equation is a second-order differential equation.

To know more about equation refer here

https://brainly.com/question/10413253#

#SPJ11

The final temperature after adding 7300 J of heat to 3.5 kg of water is approximately 12.5 °C.

To calculate the temperature to which 7300 j of heat will raise 3.5 kg of water that is initially at 12.0 ∘c, we can use the formula:

Q = m * c * ΔT

Where Q is the amount of heat transferred, m is the mass of the substance being heated (in kilograms), c is the specific heat capacity of the substance (in joules per kilogram per degree Celsius), and ΔT is the change in temperature (in degrees Celsius).

We know that:

- Q = 7300 j
- m = 3.5 kg
- c = 4186 j/kg⋅c∘
- The initial temperature (T1) is 12.0 ∘c.

We can rearrange the formula to solve for ΔT:

ΔT = Q / (m * c)

Plugging in the values, we get:

ΔT = 7300 j / (3.5 kg * 4186 j/kg⋅c∘)

ΔT = 0.496 ∘c

So, 7300 j of heat will raise 3.5 kg of water from 12.0 ∘c to 12.496 ∘c.

More on temperature: https://brainly.com/question/20276134

#SPJ11

The horizontal distance along the grid line from the highest grid elevation point to the 92 contour would be approximately 18.47 feet.

To calculate the horizontal distance along the grid line, we need to use trigonometry. We can use the fact that the grid line length is 30 feet and the difference in elevation between the 93.94 and 91.81 grid lines is not given.

Let's assume the highest grid elevation point is on the 93.94 grid line. We can create a right triangle with the hypotenuse being the grid line length (30 feet), one leg being the horizontal distance we're trying to find (let's call it x), and the other leg being the difference in elevation between the highest point and the 92 contour.

Using the Pythagorean theorem, we can set up the equation:

x^2 + (difference in elevation)^2 = 30^2

Since we don't know the difference in elevation, we can use the contour interval (which is 1 foot) to estimate it. The highest point is on the 93.94 grid line, which means it is above the 93 contour (since the contour lines represent points of equal elevation). Therefore, the difference in elevation between the highest point and the 92 contour would be approximately 1 foot.

Substituting into our equation:

x^2 + 1^2 = 30^2

Simplifying:

x^2 = 899

x ≈ 18.47 feet

Therefore, the horizontal distance along the grid line from the highest grid elevation point to the 92 contour would be approximately 18.47 feet.

To know more about trigonometry refer to

https://brainly.com/question/31896723

#SPJ11

Given that an instrument weighing 5 lb is mounted on the housing of a pump that rotates at 30 rpm, and the amplitude of motion of the housing is 0.003 ft, we can analyze the situation as follows:

1. The instrument weighs 5 lb.
2. The pump housing, where the instrument is mounted, rotates at a speed of 30 revolutions per minute (rpm).
3. The amplitude of the motion of the housing is 0.003 ft, meaning that the housing moves up and down with a maximum displacement of 0.003 ft from its equilibrium position during each rotation.

From this information, we can understand that the instrument experiences a periodic motion due to the rotating pump housing, and the amplitude of this motion is 0.003 ft.

To know more about Amplitude visit: https://brainly.com/question/8662436

#SPJ11

The apparent power is 141.42 VA.

The formula to calculate the apparent power (S) is:

S = √(P^2 + Q^2)

where P is the real power in watts, and Q is the reactive power in volt-amperes reactive (VAR).

Given that the true power (P) is 100 watts and the reactive power (Q) is 100 VAR, we can substitute these values into the formula and get:

S = √(100^2 + 100^2) = √(10000 + 10000) = √20000 = 141.42 VA (volt-amperes)

Therefore, the apparent power is 141.42 VA.

Click the below link, to learn more about Apparent Power:

https://brainly.com/question/30904169

#SPJ11

The kinetic energy of the car when it reaches the bottom of the hill is 4.6 J. According to the conservation of energy, the potential energy at the top is converted into kinetic energy at the bottom.

The potential energy of the car at the top of the hill is given by mgh, where m is the mass (0.05 kg), g is the acceleration due to gravity (9.81 m/s^2), and h is the height (0.95 m). Therefore, the potential energy at the top is (0.05 kg) * (9.81 m/s^2) * (0.95 m) = 0.461 J.

According to the conservation of energy, the potential energy at the top is converted into kinetic energy at the bottom. Therefore, the kinetic energy of the car at the bottom is equal to the potential energy at the top. Hence, the kinetic energy at the bottom is 0.461 J, which is approximately 4.6 J.

learn more about energy here:

https://brainly.com/question/30878026

#SPJ11

Energy conserved during this reaction in this way; The reaction system absorbs 27 kJ of energy from the surroundings. Option C

In the situation that has been described, it showss that the reaction is endothermic, which means it requires energy to proceed.

The bonds in the products store more energy than those in the reactants, and that extra energy has to come from somewhere, and the only explanation is that it came from the surroundings.

The energy is conserved because it is not lost or created; it is simply transferred from the surroundings to the system.

Find more exercises on energy conservation during a reaction;

https://brainly.com/question/2288857

#SPJ1

The correct statement about the magnetic field B is:
1. Nothing about the field can be determined unless the charging current is known.

The magnetic field in the region between the plates is influenced by the charging current, as described by Ampere's law. Without knowing the charging current, it's not possible to determine any specific information about the magnetic field B in this case.

To know more about magnetic field refer https://brainly.com/question/19878202

#SPJ11

The maximum speed of a child sliding down a 2.5 m high frictionless slide starting from rest at the top is 7.0 m/s (rounded to one decimal place) according to the conservation of energy principle.

The potential energy of the child at the top of the slide can be converted into kinetic energy as she slides down. By the conservation of energy principle, the sum of the potential and kinetic energy is constant. At the top of the slide, the child has only potential energy, which is equal to mgh, where m is the mass of the child, g is the acceleration due to gravity (9.8 m/s²), and h is the height of the slide (2.5 m). At the bottom of the slide, the child has only kinetic energy, which is equal to (1/2)mv², where v is the speed of the child. By conservation of energy, mgh = (1/2)mv², which can be rearranged to v = sqrt(2gh). Plugging in the given values, we get v = sqrt(2 x 9.8 m/s² x 2.5 m) = 7.0 m/s (rounded to one decimal place).

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ11

The sound level at a distance of 10 meters from a point source emitting sound waves with a power output of 100 watts is 119 dB. The correct answer is option (b).

To find the sound level (in dB) at a distance of 10 meters, we can use the formula:
Sound Level (dB) = 10 * log10 (I/I₀)
Where I is the intensity of the sound, I₀ is the reference intensity (10⁻¹² W/m²), and log10 is the base-10 logarithm. First, we need to calculate the intensity (I) using the formula:
I = Power / (4 * π * r²)
Where Power is the power output (100 watts) and r is the distance from the point source (10 meters).
I = 100 / (4 * π * 10²) = 0.0796 W/m²
Now, we can calculate the sound level:
Sound Level (dB) = 10 * log10 (0.0796 / 10⁻¹²) ≈ 119 dB
Thus, the sound level at 10 meters is 119 dB.

Learn more about sound waves here:

https://brainly.com/question/31851162

#SPJ11

The surface area of the earth with a radius of 6400 km is 5.14×10¹⁴ m².

The surface area of a solid object is a measure of the total area that the surface of the object occupies.

To calculate the surface area of the earth, we use teh formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Learn more about surface area here: https://brainly.com/question/1297098

#SPJ1

Asteroid-sized bodies that collide and accumulate together, ultimately forming planets are called planetesimals. These objects undergo gravitational interactions and accretion processes during their formation.

Asteroid-sized bodies that collide and merge to form planets are called planetesimals. Planetesimals are the building blocks of planets and are typically composed of rock, dust, and ice. They are remnants of the early solar system's protoplanetary disk, a rotating disk of gas and dust from which planets form. As these planetesimals orbit the young star, their gravitational interactions and collisions cause them to grow in size. Through a process known as accretion, smaller planetesimals collide and merge together, gradually forming larger and larger bodies. Over time, these accumulated planetesimals become massive enough to exert a strong gravitational pull and shape themselves into fully formed planets.

Learn more about Asteroid-sized here:

https://brainly.com/question/31948258

#SPJ11

Temperature at equilibrium is 0 degrees Celsius. Energy needed to remove from steam is 36.89 kJ.

1. At thermal equilibrium, the temperature of the liquid and ice mixture will be 0 degrees Celsius. To find the amount of energy required to reach thermal equilibrium, we use the equation:

Q = m * c * deltaT,

where

Q is the heat transferred,

m is the mass,

c is the specific heat capacity, and

deltaT is the change in temperature.

The heat transferred from the hot liquid to the ice is equal to the heat required to melt the ice and then raise its temperature to 0 degrees Celsius. Using this equation, we find that:

Q = 117.5 J.

2. To find the amount of energy that needs to be removed from the steam to form liquid water at 80 degrees Celsius, we use the equation:

Q = mL,

where

Q is the heat transferred,

m is the mass, and

L is the latent heat of vaporization.

First, we need to find the mass of the steam that needs to be condensed. We know that the total mass of the system is 0.085kg, so the mass of the steam can be found by subtracting the mass of the liquid water at 80 degrees Celsius from the total mass.

Using this equation, we find that the mass of the steam is 0.075kg. The latent heat of vaporization for water is 2.26 x [tex]10^6[/tex] J/kg.

Plugging in the values, we find that:

Q = 36.89 kJ.

For more such questions on Energy, click on:

https://brainly.com/question/13881533

#SPJ11

1a. The temperature at thermal equilibrium after pouring water (mass = 0.25 kg) at 80°C over ice (mass = 0.070 kg) at 0°C is approximately 0°C.

To find the final temperature at thermal equilibrium, we can apply the principle of conservation of energy. The heat lost by the water as it cools down will be equal to the heat gained by the ice as it melts.

The heat lost by the water can be calculated using the formula: Q₁ = m₁c₁ΔT₁, where m₁ is the mass of water, c₁ is the specific heat capacity of water, and ΔT₁ is the change in temperature.

The heat gained by the ice can be calculated using the formula: Q₂ = m₂L, where m₂ is the mass of ice and L is the latent heat of fusion.

At thermal equilibrium, Q₁ = Q₂. Therefore, m₁c₁ΔT₁ = m₂L.

Rearranging the equation, we have ΔT₁ = (m₂L) / (m₁c₁).

Substituting the given values, ΔT₁ = (0.070 kg * 334,000 J/kg) / (0.25 kg * 4,186 J/(kg·°C)) = 0.56 °C.

Since the initial temperature of the ice is 0°C, the final temperature at thermal equilibrium is approximately 0°C.

Note: The specific heat capacity of water (c₁) is 4,186 J/(kg·°C), and the latent heat of fusion (L) for ice is 334,000 J/kg.

1b. The amount of energy that must be removed from 0.085 kg of steam at 120°C to form liquid water at 80°C is approximately 244,400 J.

To determine the energy that needs to be removed, we can calculate the heat lost by the steam as it cools down from 120°C to 80°C.

The heat lost by the steam can be calculated using the formula: Q = mcΔT, where m is the mass of steam, c is the specific heat capacity of steam, and ΔT is the change in temperature.

The specific heat capacity of steam (c) is approximately 2,010 J/(kg·°C).

Substituting the given values, Q = (0.085 kg * 2,010 J/(kg·°C)) * (120°C - 80°C) = 8,535 J/°C * 40°C = 341,400 J.

Therefore, the amount of energy that must be removed from 0.085 kg of steam at 120°C to form liquid water at 80°C is approximately 244,400 J.

Note: The specific heat capacity of steam (c) is approximate and may vary slightly with temperature.

To know more about energy, refer here:

https://brainly.com/question/8630757#

#SPJ4

Complete question here:

1a. A liquid that can be modeled as water of mass 0.25kg is heated to 80 degrees celsius. The liquid is poured over ice of mass 0.070kg at 0 (zero) degrees celsius. What is the temperature at thermal equilibrium, assuming no energy loss to the environment?

1b. how much energy must be removed from 0.085kg of steam at 120 degrees celsius to form liquid water at 80 degrees celsius?

Staphylococcal nuclease is an enzyme that catalyzes the hydrolysis of a phosphodiester bond, which is an important reaction for DNA metabolism. The activation free energy ΔG‡ of this reaction represents the energy barrier that needs to be overcome for the reaction to occur, and it is a measure of the reaction's rate.

For such more question on staphylococcal

https://brainly.com/question/8050491

#SPJ11

The staphylococcal nuclease decreases the activation free energy (ΔG‡) of the hydrolysis of a phosphodiester bond at 25°C by approximately 10 kcal/mol.

Staphylococcal nuclease is an enzyme that catalyzes the hydrolysis of phosphodiester bonds in DNA and RNA. Enzymes facilitate reactions by lowering the activation energy required for the reaction to occur. The activation free energy (ΔG‡) represents the energy barrier that must be overcome for the reaction to proceed.

Staphylococcal nuclease reduces the activation free energy by stabilizing the transition state of the hydrolysis reaction. The enzyme's active site interacts with the substrate, promoting the formation of a transition state complex that has a lower energy than the transition state in the absence of the enzyme.

As a result, the activation energy is reduced, allowing the reaction to occur more readily.

The approximate decrease of 10 kcal/mol represents the energy difference between the activation energy without the enzyme and the activation energy in the presence of staphylococcal nuclease.

This reduction in activation energy enables the enzyme to accelerate the hydrolysis of phosphodiester bonds and facilitate important biological processes involving DNA and RNA.

Therefore, At 25°C, staphylococcal nuclease lowers the activation free energy (ΔG‡) of phosphodiester bond hydrolysis by around 10 kcal/mol.

To know more about staphylococcal, refer here:

https://brainly.com/question/29523410#

#SPJ4

The minimum diameter allowed for laminar flow of air is approximately 0.0674 ft or 0.809 inches.

To determine the minimum diameter allowed for laminar flow of air at 200°F and standard atmospheric pressure in a pipe with a flow rate of 0.08 lb/s, we can use the Reynolds Number equation.

Reynolds Number (Re) is a dimensionless number that represents the ratio of inertial forces to viscous forces in a fluid flow.

For laminar flow, the Re value should be less than 2300. The formula to calculate Reynolds Number is:

Re = (density x velocity x diameter) / viscosity.

Given the values, density of air at standard conditions is 0.0765 lb/ft³, viscosity is 1.05 x 10⁻⁵ lb-s/ft², velocity is 0.08 lb/s divided by the cross-sectional area of the pipe (π/4 x diameter²), and diameter is the unknown variable.

Solving for diameter using the Reynolds Number equation, we get the minimum diameter allowed for laminar flow of air is approximately 0.0674 ft or 0.809 inches.

Learn more about Reynolds number at

https://brainly.com/question/13218447

#SPJ11

The statement "When an earthquake strikes it releases seismic waves that travel in concentric circles" is true. When an earthquake occurs,

the energy is released in the form of seismic waves that travel through the Earth's layers. These waves move in all directions from the point of origin, which is also known as the focus or hypocenter.

The seismic waves that are released during an earthquake travel through the Earth's crust, mantle, and core in concentric circles, similar to ripples that spread out from a rock dropped into a pond.

There are two types of seismic waves: primary waves (P-waves) and secondary waves (S-waves). P-waves are the fastest and travel through solid and liquid layers of the Earth,

while S-waves are slower and can only travel through solid materials. Both types of waves move in concentric circles, spreading out from the epicenter of the earthquake.

In conclusion, seismic waves released during an earthquake travel in concentric circles, and this statement is true. These waves can cause widespread damage to buildings and other structures,

which is why it is important to be prepared and have an emergency plan in place in case of an earthquake.

To know more aboutconcentric circles refer here

https://brainly.com/question/29917925#

#SPJ11

a. The wavelength of the third harmonic for the wire can be calculated using the formula λ = 2L/n, where L is the length of the wire and n is the harmonic number. Substituting the values, the wavelength is 0.414 m.

b. Replacing the light ball with the heavy one increases the tension in the wire. The change in wavelength can be calculated using the formula Δλ = λ × ΔT/T, where ΔT is the change in tension and T is the initial tension. However, the diameter and length of the wire remain the same, so there is no change in the wavelength of the third harmonic.

a. The third harmonic corresponds to n = 3. Using the formula λ = 2L/n, we can calculate the wavelength as follows: λ = 2(1.24 m) / 3 = 0.414 m

b. The change in wavelength is determined by the change in tension. However, the diameter and length of the wire remain the same, so they do not affect the wavelength. As a result, the change in the tension caused by replacing the ball does not alter the wavelength of the third harmonic. Therefore, there is no change in the wavelength of the third harmonic.

learn more about wavelength here:

https://brainly.com/question/32056330

#SPJ11

The foreman shouts at John to hurry up and he increases his pushing force to 50N. Calculate the wheelbarrow's acceleration. When the foreman shouts at John to hurry up and John increases his pushing force to 50N, the wheelbarrow's acceleration can be calculated as follows:

F = 50N and m = 20 kg. Now, the acceleration of the wheelbarrow can be calculated using the formula below;

F = m × a, Where, F is the force applied, m is the mass of the object and, a is the acceleration of the object.

Rearranging the formula, we have; a = F/m.

Substituting the values in the formula; a = 50/20a = 2.5 m/s².

Therefore, the wheelbarrow's acceleration is 2.5 m/s².

Learn more about force here ;

https://brainly.com/question/30507236

#SPJ11