Ethylene burns in oxygen to form carbon dioxide and water vapor:

C2H4(g) + 3 02(g) --> 2 CO2(g) + 2 H2O(g)

How many liters of water can be formed if 1. 25 liters of ethylene at 1. 00 atm and 298K are

consumed in this reaction?

The temperature must be greater than 50.5°C and less than 100°C.

What is temperature ?

Temperature is a physical property that is used to measure the average kinetic energy of particles in a system, such as a gas, liquid, or solid. It is measured in units of degrees on the Celsius, Fahrenheit, or Kelvin scales.

Temperature is related to the average kinetic energy of particles in the system, and is affected by the number of particles, their mass, and the strength of their interactions.

Which temperature range is typical?

Core temperature is 98.6 F on average (37 C). However, the average body temperature might be anywhere from 97 F (36.1 C) to 99 F (37.2 C) or higher. Depending on the period of year or how busy you are, your body temperature may change. In general, elderly people's temperature are lower than those of younger people.

To learn about more temperature.

brainly.com/question/25677592

#SPJ1

As stated, the Tributary, River, and River system are in order of largest to smallest.

A river is a part of the ocean that resembles a ribbon and flows downward under the influence of gravity. A river may be both large and deep or it may be only shallow enough to wade over. A stream, watercourse, or brook is a streaming water source that is lower than a river.

The river flows through the landscape like a silver ribbon. The fast flowing river plunders everything in its path. The river is a seal that is attempting to return toward the tidal ways. A grizzly bear is the river, leaping to get its prey.

To know more about River visit:

https://brainly.com/question/17083829

#SPJ1

The complete question is-

Place the following in order from smallest to largest.

River, River system, Tributary.

The name of most reactive non-metal element on the periodic table is fluorine

Fluorine is the nonmetal in the periodic table that is the most reactive.

On the Pauling scale, it has the highest electronegativity of any element (3.98). Fluorine is a highly reactive, diatomic gas that may mix with practically every other element to form compounds that have entirely different properties from either of the original components. The boiling point of fluorine is -188 °C (-310 °F).

Hydrofluoric acid and hydrogen fluoride gas are produced during the reaction with water: HF + H₂O ⇒H⁺ + HF + OH.

Chemical elements are shown on a periodic table in order of their atomic number. The classification of elements and their relationships to one another can be understood using the periodic table.

Learn more about reactivity at https://brainly.com/question/20570629

#SPJ4

Answer:

Francium

Hope this helps :)

2.49 x [tex]10^{-4}[/tex] moles is equal to 1.5×[tex]10^{20}[/tex]. The number of moles is equal to the number of molecules divided by Avogadro's number, 6.022×[tex]10^{23}[/tex].

This means that 1.5×[tex]10^{20}[/tex]moles are equal to

1.5×[tex]10^{20}[/tex]/6.022×[tex]10^{23}[/tex]

0.24908×[tex]10^{-3}[/tex]

2.49 x [tex]10^{-4}[/tex] moles.

Avogadro's number: Avogadro's number is a constant used in chemistry to represent the number of atoms or molecules in a mole of a substance. It is equal to 6.022 x [tex]10^{23}[/tex]. Or we can say that Avogadro's number is, the number of units in one mole of any substance (defined as its molecular weight in grams), equal to 6.02214076 × 1023. The units may be electrons, atoms, ions, or molecules, depending on the nature of the substance and the character of the reaction.

Learn more about moles:

https://brainly.com/question/28037816

#SPJ4

Answer: -162,120J

Explanation:

Okay, so q stands for work, given by the formula q = -P∆V,

For the first round, we have 2atm (for P) and a volume change of 3.2 (6.4-3.2) for the first experiment.

Find the work: q = -2 • (3.2 - 6.4) = 6.4L/atm

For the second experiment, it is now 2.5atm, with the change in volume going from 3.2 to 2.56.

So, work is q = -2.5(2.5 - 3.20) = 1.6L/atm

Add the total work: 1.6 + 6.4 = 8L/atm

To find the Joules per L/atm, recall that a mol of gas in K is 8.31447J, while the gas constant where a liter of gas per mol in K is 0.08206L/atmK. Divide these two values, which leaves us with 101,325J

So, for the first round, multiply 8 x 101,325, which leaves us with 810,600J.

Second round: The pressure is 2.5atm, with the volume change from 6.40 to 2.56

Solve for work: q = -2.5(2.56-6.4) = 9.6L/atm

Multiply with the Joule unit found earlier: 9.6 x 101,325 = 972,720J.

To find the difference, subtract the value of the single-step process (second round) from the first round (multistep)

810600 - 972720 = -162,120J. Therefore, it takes more heat to do the single step than the multistep process.

Both anaerobic and aerobic conditions can result in glycolysis. Pyruvate joins the citric acid cycle under aerobic conditions and proceeds through oxidative phosphorylation, which results in the net synthesis of 32 ATP molecules.

Anaerobic exercises require small bursts of energy and are finished rapidly while exerting maximum effort. Examples include jumping, jogging, and hard weightlifting. Your breathing and heart rate alter as you engage in aerobic vs anaerobic activities. During aerobic workouts, oxygen is your major source of energy.

Anaerobic means "without oxygen," whereas aerobic indicates the existence of oxygen. Both are important for your overall health since they put your body through different difficulties. Anaerobic exercise consists of short bursts of high-intensity activity that do not demand your body to consume oxygen as it would during cardio (or aerobic) exercise.

Here,

Glycolysis can occur under both anaerobic and aerobic settings. Under aerobic circumstances, pyruvate enters the citric acid cycle and goes through oxidative phosphorylation, resulting in the net production of 32 ATP molecules.

To know more about anaerobic respiration visit:

https://brainly.com/question/13515664

#SPJ4

At a pH of 11, the side chain of arginine would be positively charged (NH3+) and polar.

This is because the pKa of the guanidine group (NH2) in the side chain of arginine is 12.48, which means that at a pH greater than 12.48, the guanidine group will be protonated and carry a positive charge. Since the nitrogen atom in the guanidine group is also surrounded by hydrogen atoms, the side chain is polar.

Key points:

Learn more about arginine here:

https://brainly.com/question/28368975

#SPJ4

Thermal energy flow between a hot or cold pack and the atmosphere by the D. Hot packs absorb energy from the atmosphere and cold packs release energy into the atmosphere.

When a hot pack is applied to the skin, the heat energy stored inside the pack is transferred to the skin, by conduction, and the heat energy is absorbed by the skin. Cold packs work in the opposite way, the cold energy stored inside the pack is transferred to the skin and released into the atmosphere.

The heat energy is conducted out of the pack and then radiated out into the atmosphere in the case of a cold pack, and The heat energy is conducted into the pack and then radiated out into the atmosphere in the case of a hot pack.

Learn more about thermal energy flow here: https://brainly.com/question/4820001

#SPJ4

To solve this we must be knowing each and every concept related to Law of constant proportion. Therefore, the results are in agreement with the law of constant proportion.

Chemical compounds are composed of components that are present in a set ratio by mass, according to the Law of Constant Proportion. The Proust law or Law of Definite Proportions is another name for the Law of Constant Proportion. NaCl will continue to have a 1:1 mass ratio.

mass of NaCl = mass of Cl +  mass of Na

0.25 g= 0.1518 gm+ mass of Na

mass of Na = 0.0982 gm.

ratio of 1st sample= mass of  Cl /mass of Na

                                       =  0.1518  gm/ 0.0982

                                      =1.54                            

In the second sample, NaCl weighs 0.24 g, Cl weighs 0.1458 g and Na weighs 0.0942 g.

ratio of 2nd sample is = 0.1458 g/0.0942 g.

                                            =1.54

Therefore, the results are in agreement with the law of constant proportion.

To learn more about Therefore, the results are in agreement with the law of constant proportion., here:

https://brainly.com/question/20696665

#SPJ1

The density of the metal beads, given that total mass of the metal plus alcohol in the flask was determined to be 38.6794 g is 3.22 g/mL

We'll begin by obtaining the density of the alcohol in the flask with the metal beads. This is illustrated below:

Density = mass / volume

Density of alcohol = 19.7325 / 25

Density of alcohol = 0.7893 g/mL

Next, we shall determine the volume of the alcohol in the 25 mL flask. This can be obtained as follow:

Volume = mass / density

Volume of alcohol in flask = 13.5734 / 0.7893

Volume of alcohol in flask = 17.2 mL

Finally, we shall determine the density of the metal beads. Details below:

Density = mass / volume

Density of metal beads = 25.1060 / 7.8

Density of metal beads = 3.22 g/mL

Thus, we can conclude that the density of the metal beads is 3.22 g/mL

Learn more about density:

https://brainly.com/question/952755

#SPJ1

Complete question:

A calibrated flask was filled to the 25.00 mL mark with ethyl alcohol. By weighing the flask before and after adding the alcohol, it was determined that the flask contained 19.7325 g of alcohol. In a second experiment, 25.1060 g of metal beads were added to the flask, and the flask was again filled to the 25.00 mL mark with ethyl alcohol . The total mass of the metal plus alcohol in the flask was determined to be 38.6794 g. What is the density of the metal in g/mL?

Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added.  the volume of the stone is 26 cm³.

Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. She fills a measuring cup with 473 mL of water and drops the stone in, causing the water level to rise to 499 mL. Using the conversion factor that 1 mL = 1 cm³, the initial volume of water is 473 cm³ and the final volume of water is 499 cm³. By applying the equation [Volume of stone] + [Initial water volume] = [Final water volume],

substituting the values

⇒ xcm3 +473cm3 = 499cm3

xcm3 =499cm3 −473cm3

xcm3 =26cm cube

the volume of the stone can be determined to be 26 cm³.

Learn more about  conversion factor here:

https://brainly.com/question/28366871

#SPJ4

x + (360 - x) = 360 * 0.50

where x is the amount of the 60% acid solution.

Solving for x, we get: x = 360 * 0.50 - 360 x = 180

Therefore, you will need to mix 180 L of the 60% acid solution with 180 L of the 15% acid solution to get 360 L of a 50% acid solution.

Acid is a substance that has a pH level of lower than 7.0 and is capable of corroding or dissolving other substances. It is usually found in aqueous solutions and is a highly reactive substance. Examples of acid include sulfuric acid, hydrochloric acid, nitric acid and acetic acid. These are used in a variety of industries such as food production, industrial cleaning and chemical engineering.

To learn more about acid
https://brainly.com/question/26855500
#SPJ4

459.1 g of aspartame has a 1.56 moles of aspartame.

Artificial sweetener aspartame is potent and low in calories. About 200 times sweeter than sugar, it is a white, odourless powder. It is legal to use in Europe as a tabletop sweetener, an energy-reducing food ingredient in beverages, desserts, and sweets, dairy products, chewing gum, and other foods.

Aspartame is a dipeptide that is created through the formal condensation of the amino group of methyl L-phenylalaninate with the alpha-carboxy group of L-aspartic acid.

Here, aspartame has 1.56 moles.

Molar mass of aspartame = 294.40 g/mol

So, Number of moles of aspartame = [tex]\frac{Given Mass}{Molar Mass}[/tex]

Mass of aspartame = Number of moles × Molar mass

or, mass = 1.56 × 294.3

or, mass = 459.1 g

Hence, Mass of aspartame of 1.56 moles of aspartame is 459.1 g.

To know more about aspartame from the link

brainly.com/question/10361394

#SPJ4

Ferric oxide, is the product that is formed when iron undergoes oxidation

Upon reacting with oxygen, iron will be oxidized to either the +3 oxidation state in iron (III) oxide, or to a combination of the +2 and +3 oxidation states in iron (II, III) oxide.The balanced chemical equations for these reactions look like this

#4”Fe”_text((s]) + 3”O”_text(2(g]) -> 2”Fe”””_2”O”_text(3(s])#

And

#3”Fe”_text((s]) + 2”O”_text(2(g]) -> “Fe”””_3”O”_text(4(s])#

The first compound, iron (III) oxide, also called ferric oxide, is dark red/brown in color

While the second compound, iron (II, III) oxide, also called ferrous ferric oxide, is dark brown/black in color.The [Fe(H2O)6]3+ ion is colorless (or pale pink), but many solutions containing this ion are yellow or amber-colored because of hydrolysis.

To learn more about chemical equation to refer:

https://brainly.com/question/30087623

#SPJ1

The structure of a molecule affects its physical properties because the arrangement of the atoms in the molecule determines the type of forces that interact between molecules.

And that forces affect how the molecules move and interact with each other. This, in turn, affects the physical properties of the molecule, such as its melting point, boiling point, polarity, and solubility.

For example, when a molecule has a higher number of non-polar bonds due to symmetrical structures, it will be less polar overall and have fewer attractive forces acting between molecules, resulting in a higher boiling point and lower solubility.

On the other hand, a molecule with a higher number of polar bonds due to asymmetrical structures will be more polar overall, leading to stronger attractive forces acting between molecules, resulting in a lower boiling point and higher solubility.

For more questions like Properties click the link below:

https://brainly.com/question/13562531

#SPJ4

Respiratory and fluid status are primary nursing interventions for patients with chemical burns.

When treating, make sure that the causative agent is completely removed. Remove contaminated clothing and jewelry and use the shower if necessary to wash off the chemicals for at least 20 minutes. Protect your eyes from chemical contamination. Cover the burn with a clean bandage.

During the first few days after a burn, check your peripheral pulse frequently for restricted blood flow. Carefully monitor hourly fluid intake and urine output, as well as blood pressure and heart rate. Any changes should be reported immediately to the burn surgeon.

Learn more about peripheral pulse visit:

brainly.com/question/8751059

#SPJ4

The name of an isotope that has 14 protons and 14 neutrons is Silicon-28

The total number of protons and neutrons in an isotope's nucleus is referred to as the mass number. This is due to the fact that each proton and neutron has a mass of one atomic mass unit.

We may get the mass of the atom by multiplying the total number of protons and neutrons by 1 amu.

The atomic number Z is 14 if there are 14 protons. Z being the quantity of large positively charged nuclear particles by definition.

Silicon is what we have if Z is the atom's identity and Z=14. The isotope of the element is 28S because the element may contain more or fewer neutrons than Z, where neutrons are heavy, neutrally charged nuclear particles.

Silicon-28 is the isotope with 14 protons and 14 neutrons.

Learn more about neutron at brainly.com/question/29248303

#SPJ4

According to the stoichiometry of the given chemical equation,2.66 moles of aluminium oxide are formed when 4 moles of oxygen reacts.

It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.

Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.

As 3 moles  of oxygen gives 2 moles of aluminium oxide, thus, 4 moles of oxygen will give 4×2/3=2.66 moles.

Thus, 2.66 moles of aluminium oxide are formed when 4 moles of oxygen reacts.

Learn more about stoichiometry,here:

https://brainly.com/question/9743981

#SPJ1

The empirical formula for this compound containing 59.94 % carbon, 13.44 % hydrogen, and 26.62 % oxygen by mass is C3H8CO.

Given the % of carbon = 59.94%

The % of hydrogen = 13.44%

The % of oxygen = 26.62%

If a percentage is provided, we will assume that the entire mass is 100 grams. As a result, each element's mass is equal to the percentage indicated. Then

the mass of carbon (m1) = 59.94g

The mass of hydrogen (m2) = 13.44g

The mass of oxygen (m3) = 26.62g

We know the molar mass of C = 12 g/mole

The Molar mass of H = 1 g/mole

The Molar mass of O = 16 g/mole

The moles of carbon = 59.94/12 = 4.995

The moles of hydrogen = 13.44/1 = 13.44

The moles of oxygen = 26.62/16 = 1.664

Divide each mole value by the lowest computed mole number to get the mole ratio.

For C = 4.995/1.664 = 3 , For H = 13.44/1.664 = 8 and For O = 1.664/1.664 = 1. Then the empirical formula = C3H8CO

To learn more about hydrogen click here https://brainly.com/question/11837837

#SPJ4

The part of the system that has two outputs of energy is the bulb.

We would have to recall that on the basis of the first law of thermodynamics, it can be said that energy can not be created nor destroyed but that energy would have to be converted from one form to the other.

In this case, we can see that as the boy is cycling, there is the conversion of the mechanical energy of the boy to the heat and the light energy of the bulb as shown. These are the outputs referred to above.

Learn more about energy:https://brainly.com/question/1932868

#SPJ1

Inside the metric system, length as well as distance were two of the most significant metrics. Measurement of length and distance can be done in a variety of ways.

Using a metre stick is among the most popular methods for gauging these amounts.

A meterstick, meterstick, nor yardstick consists of either a straightedge as well as foldable ruler was using to measure length, and therefore is notably common inside the construction business. They frequently consist of wood as well as plastic, and their joints frequently consist of plastic as well as metal to allow for folding.

A metre stick is a highly helpful tool in science that is exactly one metre long. A metre stick can be used to gauge items and distances that are both less than as well as longer than one metre.

To know more about metre stick

https://brainly.com/question/13399673

#SPJ4

There is no heat exchange with the environment since the calorimeter is insulated. This may be demonstrated by saying: Since the calorimeter is a fixed unit, it follows that its heat capacity likewise has a fixed value.

Calorimeters are the tools used to measure the amount of heat. The definitions of heat and temperature, the quantity of heat absorbed to raise a body's temperature, the distinction between heat and temperature, and specific heat capacity are among the fundamental ideas presented in this chapter. A chemical reaction's associated thermal energy change is what causes a calorimeter's temperature to fluctuate. If the calorimeter absorbs heat (q calorimeter > 0) and its temperature rises, the reaction is producing heat (q rxn 0).

To learn more about capacity please click on below link

https://brainly.com/question/15158174

#SPJ4

The supplied statement indicates that the compound's molecular formula is (CH)ₙ = CH₆ = C₆H₆

Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is now most widely employed are urea manufacturing and petroleum refining, with the developing markets of utilities and transportation.

The lowest half figure ratio of a compound is revealed by the empirical formula for that molecule.

Empirical weight formula: 12 + 1 Equals 13.

Molecular weight = 78

n = Molecular weight/Empirical formula weight

n = 78.12/13

n = 6.00

Molecular formula = (CH)ₙ = CH₆ = C₆H₆

To know more about Hydrogen visit:

https://brainly.com/question/24433860

#SPJ1

To solve this we must be knowing each and every concept related to rock and its characteristics. Therefore, the two characteristics of the rock can be given as below.

The word rock relates to the material's bulk volume, which includes the grain or crystals in addition to the enclosed vacuum space.

The two characteristics of the rock are:

Some minerals exhibit color features related to mineral composition and atom arrangement: for example, magnetite is black, chlorite is green, and pyrite is brassy yellow.

The capacity of a mineral to resist scratching is used to estimate its hardness, which is generally determined on fresh material. When a mineral is scraped with a knife, it softens. If a knife cannot scratch it, the two have equivalent hardness or even the mineral is harder.

Therefore, the two characteristics of the rock can be given as above.

To learn more about rock, here:

https://brainly.com/question/13498906

#SPJ1

some materials made up of entirely nonmetal atoms are soluble in water while some are not Due to different combinations of pairs created, which might either dissolve extremely well, or not dissolve whatsoever

The solubility of a substance in water depends on the nature of the chemical interactions between the substance and the water molecules. Some materials made up of entirely nonmetal atoms are soluble in water because they can form hydrogen bonds with the water molecules. These materials are called polar solvents and are typically composed of polar molecules, like those found in many organic compounds. For example, ethanol (C2H5OH) is a polar solvent that is composed of entirely nonmetal atoms and is soluble in water because it can form hydrogen bonds with the water molecules.On the other hand, some materials composed of entirely nonmetal atoms are not soluble in water because they do not form hydrogen bonds with the water molecules. These materials are called non-polar solvents and are typically composed of non-polar molecules, like those found in many hydrocarbons.

Learn more about hydrogen bond here:

https://brainly.com/question/15099999

#SPJ4

The two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances are mass (m) and volume (V).

To calculate the unit factor, we need to divide the unit of the desired quantity by the unit of the given quantity. For example, to convert from mass to volume, the unit factor is V/m.

This unit factor can then be used to convert mass to volume or vice versa. Dimensional analysis helps us to determine the proper units for a given equation and to convert from one unit to another.

It also allows us to compare different units of measurement and to check that the units in both sides of an equation match. This is especially useful in chemical calculations, where it is important to ensure the correct units are used.

For more questions like Dimensional analysis click the link below:

https://brainly.com/question/23510660

#SPJ4

The two elements that are frequently used for making transistors are  niobium and columbium.

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

Learn more about elements,here:

https://brainly.com/question/14347616

#SPJ1

The dominant phenotype for sheep color is wool because it is the most common color seen in sheep.

What do you mean by Phenotype?

Phenotype is the physical, biochemical, and physiological characteristics of an organism, as determined by both genetic makeup and environmental influences. It is the physical expression of an organism's genes, and can be seen in its morphology, development, and behavior.

Wool is usually white or off-white in color and is the result of a dominant gene. The recessive phenotype for sheep color is non-wool, which is usually a darker color, such as black, brown, or gray. This is the result of a recessive gene and is less common than the dominant gene.

To know more about Phenotype,

https://brainly.com/question/902712

#SPJ4

If a researcher wanted to the temporarily denature a protein but wanted to be sure it would refold, the method or the substances would be most appropriate is the urea.

The denature is defined as the process of the modification of the molecular structure of the protein. In this method it involves the breaking of the many weak linkage or the bonds in the protein molecules. It is responsible for highly ordered of the structure of the protein in the natural of state.

Thus, the urea is the appropriate substances , if the researcher wanted to the  temporary denature the proteins.

To learn more about denature here

https://brainly.com/question/14580687

#SPJ4