Explain how electron micrographs such as this helped falsify the Davson-Danielli model of membrane structure

The sample has a volume of 5.3 mL.

Sample in chemistry is the collection of atoms, molecules, or other physical forms of a substance that are used for testing, analysis, or other scientific purposes. Samples are typically collected from a larger population and then studied to understand the larger population. In chemistry, samples can range from tiny amounts of a single chemical compound to large amounts of a mixture of compounds. Sampling is important for understanding chemical properties and reactions, as it helps scientists analyze the behavior of compounds in different situations.  Sampling can also be used to determine factors such as the toxicity, stability, or reactivity of a material.

To learn more about sample
https://brainly.com/question/25736513
#SPJ4

In the molecule C2H4, valence orbitals of the carbon atoms are assumed to be e) sp^2 hybridized.

The set of orbitals that can energetically accept electrons to create chemical bonds is known as the valence shell. The ns and np orbitals in the outermost electron shell make form the valence shell for main-group elements.

The outside electrons engaged in bonding are called valence electrons. A particular atom can have 0 to 7 valance electrons since valance electrons can only exist in the s and p orbitals. Noble gases are atoms that have no valence electrons and dislike forming bonds.

To know more about valence orbitals, refer

https://brainly.com/question/14312272

#SPJ4

When only 1 mol of oxygen was intended to be produced, a process instead yields 4.93 L of oxygen. The percent yield of the reaction is 493%.

Percent yield is a measure of how much of the desired product is produced in a chemical reaction. It is calculated by comparing the actual yield of a product to the theoretical yield, which is the amount of product that would be produced if the reaction were 100% efficient.

To calculate the percent yield, you can use the formula:

= percent yield

= (actual yield / theoretical yield) x 100%

The theoretical yield of a reaction is calculated by multiplying the number of moles of reactant used by the stoichiometry of the reaction. In this case, the reaction is supposed to produce 1 mol of oxygen, which is the theoretical yield. To calculate the actual yield, we can use the Ideal gas law PV = nRT, where P is the pressure, V is the volume, n is the number of mol. Since we know that V = 4.93 L, we can use this information to find n:

= n

= (PV) / RT

The actual yield is 4.93 L of O2 or 4.93 L of any gas at STP (Standard Temperature and Pressure) is equivalent to 4.93 moles of O2.

Then we can use this information to calculate the percent yield:

= percent yield

= (actual yield / theoretical yield) x 100%

= (4.93 moles O2 / 1 mole O2) x 100%

= 493%

So, the percent yield of the reaction is 493%.

It's important to note that a percent yield of greater than 100% is usually an indication of an error in the measurement or calculation of the actual yield, or it could be an indication that the theoretical yield is incorrect.

To know more about oxygen please refer: https://brainly.com/question/1506082

#SPJ4

Option B, Bonding pair-bonding pair, lone pair-bonding pair, lone pair-lone pair. The electrons in bonding pairs are repulsion held relatively closely together, and are involved in the formation of a chemical bond.

The repulsion between two bonding pairs is relatively weak, as they are attracted to the positively charged nuclei of the atoms they are bonding. The repulsion between a lone pair of electrons and a bonding pair of electrons is generally stronger than that between two bonding pairs because the lone pair is not involved in bonding and tends to be held further away from the nucleus, causing the electron cloud to be larger and thus a stronger repulsion because the two lone pairs are not involved in bonding, and are held relatively far away from the nuclei, causing the electron clouds to be larger and thus a stronger repulsion

Learn more about repulsion here:

https://brainly.com/question/25143253

#SPJ4

Other elemental substances in that they consist of two atoms of the same element, bonded together.

Diatomic elements are chemical elements that exist in the form of two atoms held together by covalent bonds. The most common elements that exist as diatomic molecules are hydrogen, oxygen, nitrogen, fluorine, chlorine, bromine, and iodine. These elements are found in nature and play important roles in the formation of compounds used in everyday life.

This bond is usually covalent in nature, and the two atoms form a stable molecule. This type of molecule is very stable and present in the form of gas, at room temperature and pressure. Examples of diatomic elements are hydrogen, oxygen, nitrogen, fluorine, chlorine, and bromine. Due to the fact that these elements are already in a stable, two-atom form, they exhibit different chemical and physical properties than other elements. For example, diatomic oxygen is highly reactive and can easily combine with other elements, while diatomic nitrogen is relatively inert. This difference in reactivity is due to the fact that the two atoms in the diatomic form share electrons more easily than atoms in other elemental forms.

To know more about Diatomic elements click-https://brainly.com/question/29078214
#SPJ4

the diagram that best represents the particle-level structure of steel as alloy is option (b).

Alloy, often known as an alloy, is a metallic material made up of two or more elements. Even though carbon, a nonmetal, is a crucial component of steel, the constituents of alloys are typically themselves metals.

Typically, melting the mixture of materials produces alloys. Early civilizations recognized the usefulness of alloys; brass (copper and zinc) and bronze (copper and tin) were particularly significant.

Steel is an alloy of iron and carbon. carbon range is upto 2 percent in the mixture.

In steel iron atoms are larger than carbon.

Learn more about alloy

brainly.com/question/3718729

#SPJ4

TSO-C129 and TSO-C196 refer to non-WAAS GPS systems. TSO-C146 refers to WAAS-enabled GPS systems. If non-WAAS GPS is used for navigation and instrument approaches, all required alternate airports must have non-GPS approved operational instrument approach procedures.

TSO-C129 - Airborne Auxiliary Navigation Sensor for Global Positioning System equipment with airborne extensions. TSO-C196 – Auxiliary airborne navigation sensor for GPS units with airborne augmentation.

TSO certification means minimum performance standards for certain materials, parts and equipment used in commercial aircraft. Authorization to manufacture materials, parts, or equipment in accordance with TSO standards is referred to as TSO authorization.

Learn more about auxiliary visit:

brainly.com/question/29756273

#SPJ4

The process of dissolution of KBr in water occurs because the final solution has a lower energy state than the two components separately.

What do you mean by endothermic?

Endothermic reactions are chemical reactions that absorb energy from their surroundings in order to proceed. This energy is usually in the form of heat and is absorbed from the surroundings in order to drive the reaction forward.

Even though the dissolution process is endothermic, it occurs because the enthalpy of solution is less than the sum of the enthalpies of the two components separately. The enthalpy of solution is the energy required to break the strong ionic bonds between the KBr molecules, allowing them to dissolve into the solution. The energy released from the formation of new hydrogen bonds between the KBr molecules and the water molecules is greater than the energy needed to break the ionic bonds, resulting in a net release of energy. This release of energy causes the overall process to be exothermic, even though the dissolution of KBr into water is endothermic.

To know more about endothermic,

https://brainly.com/question/6506846

#SPJ4

Answer:

E. The substitution allows each carbon atom to accept more than four valence electrons.

Explanation:

Halogens (except for fluorine) have seven valence electrons, which gives them the flexibility to participate in more than four covalent bonds. Hydrogen only has one valence electron, so it tends to form only four covalent bonds. In a substitution reaction, each halogen provides the carbon atom with additional electrons, allowing it to accept more than the usual four.

Answer:

C. The bonds between the carbon atoms in the molecule become weaker.

Explanation:

Aspartic acid and phenylalanine are the two amino acids that make up aspartame, along with methanol. When the body processes this third key ingredient, formaldehyde and formic acid are produced.

Materials, Raw Two amino acids, phenylalanine and aspartic acid, as well as methanol, make up aspartame. L-aspartyl-L-phenylalanine methyl ester is its formal chemical name. Proteins are made up of amino acids, which are frequently referred to as the building blocks of proteins. Aspartame has the chemical formula C14H18N2O5. In foods and beverages, aspartame, a synthetic, non-saccharide sweetener that is 200 times sweeter than sucrose, is frequently used as a sugar substitute. The commercial names for it are NutraSweet, Equal, and Canderel.

Learn more about aspartame here:

https://brainly.com/question/9352908

#SPJ4

Answer: Beta Decay is the kind of radioactive decay that has the net effect of changing a neutron into a proton.

Explanation:

The opposite path, in which a neutron becomes a proton, is also possible. Exactly what happens is that a weak force changes the flavor of the card from top to bottom and vice versa. When this happens, the quark emits a W boson, which quickly decays into either an electron/antineutrino pair or a positron/neutrino pair, depending on the direction of change (neutron decays to protons, electron/antineutrino pairs are created).

Learn more about Beta Decay:

https://brainly.in/question/3235096

D. methane, butane and propane

Propane and butane are both types of alkane hydrocarbons with relatively low boiling points, which allows them to be easily converted to a liquid form at relatively low pressures. This makes them easy to transport and store. Methane, ethane, and hexane are also alkane hydrocarbons, but they are not typically found in large amounts in LPG.

Learn more about "LPG " : https://brainly.com/question/29543454

The product could have been lost if this experiment was conducted in a physical laboratory: Human Error, Incomplete Reaction, Inadequate Stirring, Impurities and Loss of Product.

Product is a tangible or intangible good that is produced for sale on the market.

1. Human Error: Inaccurate measurements or miscalculations during the experiment may have caused the percent yield not to be 100%.
2. Incomplete Reaction: Depending on the reaction conditions, it is possible that the reaction did not go to completion, leading to a lower percent yield than expected.
3. Inadequate Stirring: If the reactants were not adequately mixed during the experiment, some reactants may not have been able to properly react, resulting in a lower percent yield.
4. Impurities: If the reactants used in the experiment were impure, it could lead to a lower percent yield due to the presence of undesirable substances that can interfere with the reaction or are not involved in the reaction.
5. Loss of Product: If the experiment was conducted in a physical laboratory, it is possible that some of the product was lost during the experiment due to improper handling or other factors.

To learn more about product
https://brainly.com/question/29171025
#SPJ4

The amount of hydrogen monochloride that is produced at STP is 152 mL.

The balanced chemical reaction can be depicted as follows:

H₂ + Cl₂ -----> 2 HCl

According to stoichiometry, When one mole of hydrogen reacts with one mole of chlorine, it yields two moles of hydrogen monochloride. Stoichiometry defines the relationship between the quantities of reactants and products before, during, and following chemical reactions

If, 2 g of Hydrogen reacts with 71 g of chlorine to form 73 g of Hydrogen Chloride.

Therefore,  if 10 g reacts with 142 g of chlorine, the HCl produced will be 152 g or 152 ml of HCl.

To learn more about stoichiometry check the link below:

https://brainly.com/question/14935523

#SPJ4

Given that 1 kWh = 3. 6 MJ and that 1 Btu = 1055 J, It is shown that 1 kWh = 3412 Btu.

1 kilowatt (kWh) = 3.6 mega Joules (MJ)

1 British thermal unit (Btu) = 1055 Joules (J)

As we know that:

1 MJ = 1000000 J

Since

1 kWh = 3.6 x 1000000 J

Calculate for 1 J

1 J = 1 ÷ 1055 Btu

1 kWh = 3.6 x 1000000 x (1 ÷ 1055) Btu

1 kWh  = 3412.32 Btu

So it is calculated that 1 kilowatt (kWh) is equal to 3412 British thermal units (Btu).

You can also learn about British thermal unit (Btu) from the following question:

https://brainly.com/question/19431525

#SPJ4

The net charge at pH=7. The pKa values given in the table above will term is referred as neutral.

At pH = 7, the solution is considered neutral, which means that the concentration of H+ ions is equal to the concentration of OH- ions, i.e [H+] = [OH-] = 10^-7 M.

To estimate the net charge at pH = 7, you would need to know the pKa values of the acid and the species present in the solution.  It is important to note that the net charge at pH 7 will depend on the acid and species present in the solution, and the pKa values given for that specific acid. In a neutral solution, the pH is equal to 7, which means that the concentration of H+ ions is equal to the concentration of OH- ions. Since the pH is neutral, this means that the solution has no net charge. Neutral solutions contain equal concentrations of positive and negative ions, thus the net charge is zero.

To know more about pH please refer: https://brainly.com/question/16926229

#SPJ4

The potential energy will go into kinetic right as it is about to hit the bottom. Then, the value will be the b) same for the kinetic energy.

When an object falls, its potential energy decreases, and its kinetic energy increases. A decrease in the potential energy is exactly the same as an increase in the kinetic energy. According to the law of conservation of energy, just before the lamp stops, the potential energy at the top of the lamp and the kinetic energy at the bottom must be equal. At the foot of the hill, the potential energy is zero and the final energy is all kinetic energy. We can equate these two values ​​according to the law of conservation of energy. Adding the kinetic energy and the potential energy gives a constant (KE+PE=constant).

Learn more about the potential energy in

https://brainly.com/question/24284560

#SPJ4

Answer:

Molecule name: N--N-METHYL-N-PROP-2-YNYLAMINE

Formula: C13 H15 N

Molecular weight: 185.265 Da

RMA-3 (Rubidium Microporous Aluminosilicate-3) was hydrothermally synthesized from rubidium–aluminosilicate gels without using any organic or inorganic additives, and its structure determined by XRD Rietveld analysis was confirmed as a novel framework topology containing two 8-membered ring pore-openings with dimensions of 0.49 × 0.37 nm and 0.34 × 0.38 nm

Answer:

Hey there! Just wanted to let you know that the term RMA stands for "relative molecular mass" in chemistry. This is a measure of the size of a molecule, calculated by adding up the atomic weights of all the atoms in the molecule. For example, the relative molecular mass of water (H2O) is 18, because the atomic weight of hydrogen (H) is 1 and the atomic weight of oxygen (O) is 16. The relative molecular mass of a molecule is typically expressed in atomic mass units (amu) and can be useful for characterizing and comparing different substances, and predicting their physical and chemical properties.

Coca-Cola is making a version of Coke that uses sucrose (C12H22O11) instead of high fructose corn syrup. The molarity of sucrose in the Coke is 0.32 mol/L.

Coca-Cola is making a version of Coke that uses sucrose (C12H22O11) instead of high fructose corn syrup. If there are 39.24 grams of sucrose in a 12.0 fluid oz. can of this Coke, what is the molarity of sucrose in the Coke.

To find the molarity of sucrose in the Coke, we first need to find the number of moles of sucrose present in the can. We can use the mass of sucrose (39.24 g) and the molar mass of sucrose (342.3 g/mol) to find the number of moles of sucrose:

= (39.24 g) / (342.3 g/mol)

= 0.114 mol

Next, we need to find the volume of the can in liters. We can convert the volume in fluid oz. to liters using the conversion factor 1 fluid oz.

= 0.0295735 L:

= (12.0 fluid oz.) x (0.0295735 L/fluid oz.)

= 0.354882 L

Finally, we can use the formula for molarity (moles of solute / liters of solution) to find the molarity of sucrose in the Coke:

= molarity

= (0.114 mol) / (0.354882 L)

= 0.32 mol/L

To know more about molarity please refer: https://brainly.com/question/8732513

#SPJ4

The triple point of a substance is the temperature and pressure at which all three phases of the substance (solid, liquid, and gas) can coexist in equilibrium.

Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines, which indicates that all three phases can coexist in equilibrium at this point.

1. A triple point of a substance is the temperature and pressure at which all three phases of the substance can coexist in equilibrium.

2. Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines.

3. This indicates that all three phases can coexist in equilibrium at this point.

4. Therefore, the correct statement is that Point B represents the triple point for Bo.

learn more about triple point here

https://brainly.com/question/519191

#SPJ4

Mass (often measured in grams) & volume are the two characteristics in this module through which we will create unit components to do statistical approach using different chemicals .

Chemical substances come in three different forms: elements, compounds, and mixtures. Elements are basically chemicals that don't contain any other substances. In this sense, elements are the fundamental constituents of chemical composition.

The component can be an isotope or a combination if it is pure. If a substance can be divided into its component elements, it is a compound. If a substance is not chemically pure, it is either a heterogeneous mixture or even a heterogeneous mixture. If the composition remains the same throughout, the combination is homogeneous.

To know more about chemical substances visit:

https://brainly.com/question/29637836

#SPJ4

Iron objects such as storage tanks and underground pipelines can be protected from corrosion by connecting them through a wire to a piece of Mg.

General corrosion happens when the majority or even all atoms on such a metal surface become oxidized, causing the surface to corrode completely. The majority of metals were easily oxidised, which means they frequently lose oxygen electrons (among other elements) in the air either in water. Oxygen joins with the metal to produce an oxide as it becomes reduced (gains electrons).

A refined metal usually transformed naturally by corrosion into a safer stable chemical form, including its oxide, hydroxide, and sulphide. By reacting chemically and/or electrochemically with their surroundings, materials slowly degrade. Additionally, it gradually eliminates the element using chemical processes.

To know more about corrosion

https://brainly.com/question/30057568

#SPJ4

An absolutely interesting occurrence is light. Despite the fact that it is well recognized that light is an electromagnetic, it is frequently more practical to characterise or characterize light in other ways than only as a wave.

For instance, light is frequently depicted as anything other than a wave in spectroscopy and fundamental physics.

Similar to how we replicate oceans moving through water, the Wave Model illustrates how light propagates. Colors can be explained using the Wave Model by including information about wavelength.

The Light Wave Model. Similar to how we simulate ocean waves moving across water, the Wave Model illustrates how light propagates. We can explain qualities of light by imagining it to be an oscillating wave.

To know more about Light click here

brainly.com/question/15200315

#SPJ4

The total random kinetic energy of all the molecules in one mole of hydrogen at a temperature of 300k is 3741.3 J.

Given temperature (T) = 300K

The number of moles of hydrogen given are (n) = 1

Molecular weight of hydrogen (M) = 1g

Let the kinetic energy = KE

We know that Kinetic Energy (KE) = 1.5nRT where R = Rydbergs constant

So, KE (total) = 1.5nRT,

the total random kinetic energy is KE = (1.5) x (1) x (8.314) x (300) = 3741.3J/mol

The energy of motion is known as kinetic energy, and it can be observed in the motion of objects or subatomic particles. Examples of kinetic energy in action include a person walking, a baseball soaring through the air, a piece of food falling from a table, and a charged particle in an electric field.

To learn more about hydrogen click here https://brainly.com/question/11837837

#SPJ4

The IUPAC name for dimethyl ketone is (C) 2-propanone

The prefix "di-" indicates two methyl groups (CH3) is attached to the parent compound, which is a ketone. The parent compound is also known as propanone.

It is a clear, colorless liquid that is commonly used as a solvent and in the production of various chemicals and materials. It is also known as acetone. It is used as a solvent, as a starting material in the synthesis of other compounds, and as an intermediate in the production of certain polymers.

Utilized to create compounds such as plastic, fiber, medicines, and other substances. Other compounds can also be dissolved with it. It is a byproduct of the breakdown of human fat and is found naturally in plants, trees, volcanic gases, forest fires, and other organisms.

Learn more about 2-propanone here: https://brainly.com/question/29167289

#SPJ4

A law summarizes a set of observations about an experiment.

Chemical law: Most of the properties and the atomic structure of the elements vary periodically when the elements are arranged in the order of their atomic numbers.

A sound explanation for observations is referred to as a theory. A summary of the relationship between variables constitutes a scientific law. A controlled method of testing a hypothesis is through an experiment.

The fundamental chemistry laws in chemistry are considered to be the following three: the mass conservation principle. the principle of proportional equality. A multiple proportions law.

To know more about chemical law visit:

https://brainly.com/question/29640690

#SPJ1

The amount, in moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.

The mole of a substance is the ratio of the mass of the substance and the molar mass of the substance. This can be mathematically expressed as:

Mole = mass/molar mass

Molar mass of [tex]UO_2[/tex] = 238 + (16x2) = 270 g/mol

Thus, the number of moles in 28 grams of [tex]UO_2[/tex] would be:

Mole = 28/270 = 0.1037 mol

In other words, the number of moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.

More on moles determination can be found here: https://brainly.com/question/14256491

#SPJ1

How many moles in 28 grams of UO2?

Answer

a. Single displacement

b. Decomposition

When classifying chemical reactions, consider how reactants change to form the products.

An equation for a chemical reaction has a left side and a right side. The arrow separates the left and right sides.

Each product or reactant can be one or more elements.

We can use letters* to represent products and reactants in a reaction.

Two reactants become one product.

One reactant becomes two products.

Start with two reactants, a compound and an element. To form the products, the element replaces one of the elements that was in the compound.

Start with two reactants that are compounds. To form the products, an element from each compound replaces each other.

Therefore, equation (a) is a single displacement reaction and equation (b) is a decomposition reaction.

*Each letter represents an element. Two elements make a compound. A letter can also represent a compound if compound stays together during the reaction.

Learn more about displacement reactions here:

https://brainly.com/question/13219117

The enthalpy of the reaction from the bond energy is +102 kJ/mol. Option C

We have to note that the enthalpy would have to do with the energy that ahs been absorbed or the energy that is released in a reaction. We know that if there is a release of energy then we can say that the reaction is exothermic but if we have a case where the energy has been taken in then we can say that the reaction in that case can be said to be exothermic.

We can see that the enthalpy of the reaction can be calculated on the basis of the bond energy when we write;

Energy of bonds that are broken - Energy of bonds that are formed.

[4(410) + 2(496)] - [2(805) + 2(460)]

(1640 + 992) - (1610 + 920)

2632 - 2530

= +102 kJ/mol

Hence, by calculation of the enthalpy bof the reaction, we can see that the reaction would absorb about 102 kJ of heat per mole of the reactant as shown.

Learn more about enthalpy:https://brainly.com/question/13996238

#SPJ1