The body axis roll rate is 1.102 rad/s, the body axis pitch rate is -3.647 rad/s, and the body axis yaw rate is 0.079 rad/s
How to use the kinematic equation?To find the body axis roll, pitch, and yaw rates using kinematic equations, we need to use the following equations:
Body axis roll rate (p) = (Ixx * L + (Izz - Iyy) * Q * R) / Ixx
Body axis pitch rate (q) = (Iyy * M + (Ixx - Izz) * P * R) / Iyy
Body axis yaw rate (r) = (Izz * N + (Iyy - Ixx) * P * Q) / Izz
where:
p, q, and r are the roll, pitch, and yaw rates in radians per second, respectively
L, M, and N are the moments about the body axes in Newton meters
P, Q, and R are the angular velocities about the body axes in radians per second
Ixx, Iyy, and Izz are the moments of inertia about the body axes in kilogram meters squared
To convert the given values in degrees per second to radians per second, we need to multiply them by pi/180.
Using the given values, we have:
omwphi = 100 deg/s = 100 * pi/180 rad/s = 1.745 rad/s
phi = 45 deg/s = 45 * pi/180 rad/s = 0.785 rad/s
psi = 10 deg/s = 10 * pi/180 rad/s = 0.175 rad/s
psi = 360 deg/s = 360 * pi/180 rad/s = 6.283 rad/s
theta = 10 deg/s = 10 * pi/180 rad/s = 0.175 rad/s
theta = 5 deg/s = 5 * pi/180 rad/s = 0.087 rad/s
Assuming the moments of inertia about the body axes are known, we can use the above equations to calculate the body axis roll, pitch, and yaw rates.
For example, let's say the moments of inertia about the body axes are:
Ixx = 100 kg [tex]m^2[/tex]
Iyy = 200 kg [tex]m^2[/tex]
Izz = 300 kg [tex]m^2[/tex]
Using these values and the given angular velocities, we can calculate the body axis rates as follows:
Body axis roll rate (p) = (Ixx * L + (Izz - Iyy) * Q * R) / Ixx
= (100 * 0 + (300 - 200) * 0.175 * 6.283) / 100
= 1.102 rad/s
Body axis pitch rate (q) = (Iyy * M + (Ixx - Izz) * P * R) / Iyy
= (200 * 0 + (100 - 300) * 1.745 * 6.283) / 200
= -3.647 rad/s
Body axis yaw rate (r) = (Izz * N + (Iyy - Ixx) * P * Q) / Izz
= (300 * 0.087 + (200 - 100) * 1.745 * 0.175) / 300
= 0.079 rad/s
Therefore, the body axis roll rate is 1.102 rad/s, the body axis pitch rate is -3.647 rad/s, and the body axis yaw rate is 0.079 rad/s
Learn more about Kinematic
brainly.com/question/23040788
#SPJ11
Let y=f(x) be the particular solution to the differential equation dydx=ex−1ey with the initial condition f(1)=0. what is the value of f(−2) ? 0.217 0.217 0.349 0.349 0.540 0.540 0.759
the value of f(-2) is approximately 0.540.
To solve the differential equation dy/dx = e^x - e^y, we can use separation of variables:
dy / (e^y - e^x) = e^x dx
Integrating both sides, we get:
ln|e^y - e^x| = e^x + C
where C is the constant of integration. Since y = f(x) is a particular solution, we can use the initial condition f(1) = 0 to find C:
ln|e^0 - e^1| = 1 + C
ln(1 - e) = 1 + C
C = ln(1 - e) - 1
Substituting this value of C back into the general solution, we get:
ln|e^y - e^x| = e^x + ln(1 - e) - 1
Taking the exponential of both sides, we get:
|e^y - e^x| = e^(e^x) * e^(ln(1 - e) - 1)
Simplifying the right-hand side, we get:
|e^y - e^x| = e^(e^x - 1) * (1 - e)
Since f(1) = 0, we know that e^y - e^1 = 0, or equivalently, e^y = e. Therefore, we have:
|e - e^x| = e^(e^x - 1) * (1 - e)
Solving for y in terms of x, we get:
e - e^x = e^(e^x - 1) * (1 - e) or e^x - e = e^(e^y - 1) * (e - 1)
We can now use the initial condition f(1) = 0 to find the value of f(-2):
f(-2) = y when x = -2
Substituting x = -2 into the equation above, we get:
e^(-2) - e = e^(e^y - 1) * (e - 1)
Solving for e^y, we get:
e^y = ln((e^(-2) - e)/(e - 1)) + 1
e^y = ln(1 - e^(2))/(e - 1) + 1
Substituting this value of e^y into the expression for f(-2), we get:
f(-2) = ln(ln(1 - e^(2))/(e - 1) + 1)
Using a calculator, we get:
f(-2) ≈ 0.540
To learn more about variables visit:
brainly.com/question/17344045
#SPJ11
this is getting really confusing now
Answer:
5
Step-by-step explanation:
solve normally
subtract the denominator
10-6 gives 4
20/4
gives 5
historically, demand has averaged 6105 units with a standard deviation of 243. the company currently has 6647 units in stock. what is the service level?
The service level is 6.6%, indicating the percentage of demand that can be met from current stock.
How to calculate service level?To calculate the service level, we need to use the service level formula, which is:
Service Level = (Demand During Lead Time + Safety Stock) / Average Demand
In this case, we are given the historical average demand, which is 6105 units with a standard deviation of 243. We are also given that the company currently has 6647 units in stock. We need to calculate the demand during the lead time and the safety stock.
Assuming the lead time is zero (i.e., we receive inventory instantly), the demand during the lead time is also zero. Therefore, the demand during lead time + safety stock = safety stock.
To calculate the safety stock, we can use the following formula:
Safety Stock = Z * Standard Deviation * Square Root of Lead Time
Where Z is the number of standard deviations from the mean that corresponds to the desired service level. For example, for a service level of 95%, Z is 1.645 (assuming a normal distribution).
Assuming a lead time of one day and a desired service level of 95%, we can calculate the safety stock as follows:
Safety Stock = 1.645 * 243 * sqrt(1) = 402.76
Substituting the values into the service level formula, we get:
Service Level = (0 + 402.76) / 6105 = 0.066 or 6.6%
Therefore, the service level is 6.6%.
Learn more about service level
brainly.com/question/31814019
#SPJ11
Given the following exponential function, identify whether the change represents growth or decay, and determine the percentage rate of increase or decrease. Y=8800(1. 573)^x
Answer:
The change is exponential growth and the percent increase is 57.3%
Step-by-step explanation:
An exponential growth function is represented by the equation
f(x)=a(1+r)^t
As such r is equal to 0.573, or 57.3%
Determine the amount a store would receive on a credit card sale after they pay the percentage to the credit card company. Purchases: $8. 65 tire shine, $14. 00 buffing rags, and $21. 78 leather cleaner. The credit card company charges a 5% rate
The amount a store would receive on a credit card sale after they pay the percentage to the credit card company is $42.21
Amount of purchase = $8.65 + $14.00 + $21.78 = $44.43
Rate charged by the credit card company = 5%
Amount charged by the credit card company = 5% of $44.43 = (5/100) × $44.43 = $2.22
Thus, the amount a store would receive on a credit card sale after paying the percentage to the credit card company is $44.43 - $2.22 = $42.21.
Therefore, the store would receive $42.21 on a credit card sale after paying the percentage to the credit card company.
To know more about percentage, click here
https://brainly.com/question/32197511
#SPJ11
Last month, Abella paid $2. 40 for a dozen eggs at the grocery store. This month, due to a shortage at the same grocery store, Abella pays $3. 00 for a dozen eggs
Abella paid $2.40 for a dozen eggs last month and $3.00 for the same number of eggs this month.
The percentage increase in the price of the eggs this month can be calculated as follows:
Step 1: Calculate the difference in prices from last month to this month
$3.00 - $2.40 = $0.60
Step 2: Calculate the percentage increase in price
Percentage increase in price = (Increase in price / Original price) x 100%
Percentage increase in price = ($0.60 / $2.40) x 100%
Percentage increase in price = 0.25 x 100%
Percentage increase in price = 25%
Therefore, the percentage increase in the price of the eggs this month is 25%.
To know more about number , visit:
https://brainly.com/question/3589540
#SPJ11
Multiple Linear Regression: A) Multiple linear regression allows for the effect of potential confounding variables to be controlled for in the analysis of a relationship between X and Y (T or F)? B) If researchers want to assume that X1 is the explanatory variable in a linear model Y=α+β1*X1+β2*X2+β3*X3, and then decide that they want to observe the relationship as though X2 were the explanatory variable, they must re-work the model and compute new beta coefficients (T or F)? C) Deviations away from the diagonal line presented in a normal Q-Q plot output indicate a high R2 value, and thus a proper approximation by the multiple linear regression model (T or F)?
The statement ''Multiple linear regression allows for the effect of potential confounding variables to be controlled for in the analysis of a relationship between X and Y'' is true because -
Multiple linear regression allows for the inclusion of multiple independent variables, which can help control for the influence of confounding variables by statistically adjusting their effects on the relationship between the dependent variable (Y) and the main independent variable of interest (X).
In simple linear regression, we analyze the relationship between a single independent variable (X) and a dependent variable (Y).
However, in real-world scenarios, the relationship between X and Y may be influenced by other variables that can confound or affect the relationship.
Multiple linear regression addresses this by including multiple independent variables (X1, X2, X3, etc.) in the analysis.
By incorporating these additional variables, we can account for their potential influence on the relationship between X and Y.
The coefficients associated with each independent variable in the regression model represent the unique contribution of that variable while controlling for the other variables.
Controlling for potential confounding variables helps to isolate the relationship between X and Y, allowing us to assess the specific impact of X on Y while considering the effects of other variables.
This enhances the validity and accuracy of the analysis, providing a more comprehensive understanding of the relationship between X and Y.
To know more about Multiple linear regression refer here:
https://brainly.com/question/30470285#
#SPJ11
im stuck! please help
The length of the arc in terms of pi is 3π units.
What is the length of the arc?
The length of the arc is calculated by applying the formula for the length of arc as shown below;
L = 2πr (θ/360)
where;
r is the radius of the circleθ is the angle subtended by the arcThe length of the arc in terms of pi is calculated as follows;
L = 2π x 9 (60/360)
L = 3π units
Learn more about lengths of arc here: https://brainly.com/question/2005046
#SPJ1
Which of the following statements are true of subject variables?
A. Subject variables cannot be manipulated by the experimenters.
B. Subject variables are considered to be "independent variables" by some but not all researchers, despite the fact that they are not manipulated.
C. Subject variables refer to qualities of the participants themselves and are traditionally used to group participants based on those qualities or traits.
D. All of the above.
E. A and C only.
Option E (A and C only) is the correct answer. Subject variables refer to qualities or characteristics of the participants in a study that cannot be manipulated by the experimenter, such as age, gender, personality traits, etc.
These variables are traditionally used to group participants based on those qualities or traits, and they can have an impact on the outcome of the study. However, subject variables are not considered to be independent variables, as they are not manipulated by the experimenter. Independent variables are manipulated in an experiment to observe their effect on the dependent variable. It is important for researchers to control for subject variables by either stratifying or randomizing participants to ensure that any observed differences between groups are not due to differences in the subject variables. Therefore, option A is true because subject variables cannot be manipulated by the experimenter, and option C is true because subject variables refer to qualities or characteristics of the participants themselves.
Learn more about variables here
https://brainly.com/question/82796
#SPJ11
Still consider using anomaly detection for intrusion detection. Let's analyze a case. Suppose Alice's computer has 4 files (not realistic but for easy calculation...), and here are some data: Fo F1 F2 F3 Filename Over time Access Rate (On) 0.2 0.1 0.4 0.3 Recent Access Rate (Rn) 0.15 x 0.45 Y Suppose ER=0(On – Rm) < 0.1 means normal 1. (1.5 pts) Give an example X & Y so the recent access rate will be considered abnormal. Show the equation you used to get your X & Y. 2. (1.5 pts) How much to differ on average for each file at the maximum so that it won't trigger an alarm while "working" towards Trudy's desired frequency? Show your equation used. Edit View Insert Format Tools Table 12pt Paragraph | B BI U Av av TP w :
I'm sorry, but the question seems incomplete or there may be some typos. It is not clear what is meant by "ER=0(On – Rm) < 0.1 means normal". Additionally, there are some missing values in the table. Can you please provide more information or clarify the question?
for which positive integers k is the following series convergent? (enter your answer as an inequality.) [infinity] (n!)2 (kn)! n = 1
For which positive integers k is the following series convergent? k > 1.The limit of the ratio will be 0 for k > 1, and the series converges for those values.
Determine for which positive integers k the following series is convergent, we need to analyze the series:
Σ [(n!)^2 / (kn)!], with n starting from 1 and going to infinity.
We will use the Ratio Test to check for convergence.
The Ratio Test states that if the limit as n approaches infinity of the absolute value of the ratio of consecutive terms (a_n+1 / a_n) is less than 1, the series converges.
First, we find the ratio of consecutive terms:
[(n+1)!]^2 / (k(n+1))! * (kn)! / [(n!)^2] = [(n+1)!]^2 * (kn)! / [(n!)^2 * (k(n+1))!]
Simplify the expression:
(n+1)^2 * (kn)! / [(n!)^2 * k * (kn + k)!]
Now, take the limit as n approaches infinity:
lim (n→∞) [(n+1)^2 * (kn)! / [(n!)^2 * k * (kn + k)!]]
As n approaches infinity, the denominator will grow faster than the numerator for k > 1. This is because the factorial function grows faster than a polynomial, and the extra k term in the denominator makes the denominator grow even faster for larger k values.
Therefore, the limit of the ratio will be 0 for k > 1, and the series converges for those values:
For which positive integers k is the following series convergent? k > 1.
Read more about positive integers.
https://brainly.com/question/18380011
#SPJ11
You go out to dinner with a friend the male cost $25. 49 tip is 20%, how much is your total cost Mann hurry
The total cost of the dinner for you and your friend, including the 20% tip, is $30.98.
The cost of the meal for your friend is given as $25. To calculate the total cost, including the tip, you need to determine 20% of $25, which is the tip amount. To find 20% of a value, you can multiply the value by 0.2. In this case, 0.2 multiplied by $25 equals $5. Adding the tip amount to the cost of the meal gives you $25 + $5 = $30.
Therefore, the total cost of the dinner, including the tip, is $30. However, it's important to note that the initial tip amount of 20% is calculated based on the cost of the meal before tax. If there are additional taxes or fees, they would be added to the total cost of $30 to get the final amount.
Learn more about total cost here:
https://brainly.com/question/6506894
#SPJ11
given the least squares regression line y hat= -2.88 1.77x, and a coefficient of determination of 0.81, the coefficient of correlation is:
The coefficient of correlation is r = 0.9
Given data ,
The coefficient of correlation, denoted by r, is the square root of the coefficient of determination (r²).
Now , the coefficient of determination is given as 0.81.
Therefore, the coefficient of correlation can be calculated as follows:
Taking the square root of the coefficient of determination , we get:
r = √(0.81)
On further simplification , we get:
The square root of 0.81 = 0.9
r ≈ 0.9
Therefore, the value of r = 0.9
Hence, the coefficient of correlation is approximately 0.9
To learn more about correlation click :
https://brainly.com/question/28898177
#SPJ1
An A&M scientist monitors an endangered species of frog over a period of 36 months. The regression equation describes the change in frog population, flx), for each month, x. S(x) - .0523 – 25x2 +6.34x + 2 Answer the following questions. (just put the 1. How many frogs were there when the scientist started? number) (just put the 2. What is the approximate frog population in month 17? number) (just put 3. In what month will the frog population be above 400 frogs? the number)
1. When the scientist started, there were 1.9477 thousand frogs
2. The frog population in month 17 is 1.2499 thousand frogs.
3. The frog population will be above 400 frogs in 3rd month.
How to find how many frogs were there when the scientist started?1. To find how many frogs were there when the scientist started, we need to find the population at month 0, which can be calculated by evaluating S(x) at x = 0:
[tex]S(0) =-0.0523 - 25(0)^2 + 6.34(0) + 2[/tex]
= 1.9477
Therefore, there were approximately 1.9477 thousand (1,947.7) frogs when the scientist started.
How to find the approximate frog population in month 17?2. To find the approximate frog population in month 17, we need to evaluate S(x) at x = 17:
[tex]S(17) =-0.0523 - 25(17)^2 + 6.34(17) + 2[/tex]
≈ 1.2499
Therefore, the approximate frog population in month 17 is 1.2499 thousand (1,249.9) frogs.
How to find the approximate frog population in month 17?3. To find the approximate frog population in month 17, we need to solve the equation S(x) = 0.4 (since S(x) is in thousands):
[tex]-0.0523 - 25x^2 + 6.34x + 2 = 0.4[/tex]
Simplifying and rearranging, we get:
[tex]25x^2 - 6.34x + 2.4523 = 0[/tex]
Using the quadratic formula, we can solve for x:
[tex]x = (-b \pm \sqrt{(b^2 - 4ac)}) / 2a[/tex]
where a = 25, b = -6.34, and c = 2.4523
Plugging in the values, we get:
[tex]x = (-(-6.34) \pm \sqrt{((-6.34)^2 - 4(25)(2.4523))}) / 2(25)[/tex]
x ≈ 2.56 or x ≈ 0.16
We can ignore the negative root since the population cannot be negative.
Therefore, the frog population will be above 400 frogs in approximately the 3rd month (since we started counting from x = 0).
Learn more about regression analysis
brainly.com/question/30011167
#SPJ11
The critical F value with 6 numerator and 60 denominator degrees of freedom at alpha = 0.05 is:
2.37
3.74
2.25
1.96
To find the critical F value with 6 numerator and 60 denominator degrees of freedom at alpha = 0.05, we need to use an F-distribution table or a calculator that can compute F-distribution probabilities.
The F-distribution table lists values for different combinations of degrees of freedom and alpha levels. For this problem, we are interested in the critical F value at alpha = 0.05, which means we need to find the value in the table that corresponds to an area of 0.05 in the right-tail of the F-distribution curve with 6 and 60 degrees of freedom.
Using a table or calculator, we find that the critical F value with 6 numerator and 60 denominator degrees of freedom at alpha = 0.05 is approximately 2.37. This means that if the calculated F-statistic from a sample falls above 2.37, we would reject the null hypothesis at the 0.05 significance level.
It's important to note that the exact critical F value may vary slightly depending on the specific F-distribution table or calculator used, as well as any rounding or approximation errors in the calculation.
Learn more about denominator here:
https://brainly.com/question/7067665
#SPJ11
A food truck did a daily survey of customers to find their food preferences. The data is partially entered in the frequency table. Complete the table to analyze the data and answer the questions: (Table attached)
Part A: What percentage of the survey respondents do not like both hamburgers and burritos? (2 points)
Part B: What is the marginal relative frequency of all customers that like hamburgers? (3 points)
Part C: Use the conditional relative frequencies to determine which data point has strongest association of its two factors. Use complete sentences to explain your answer. (5 points)
Please try to answer part C at least if you don't want to do the first two parts! It's C I'm really stuck on! Will give Brainliest, please explain and show work!
Part A: Given that a food truck did a daily survey of customers to find their food preferences. A frequency table is provided with incomplete data.
To complete the table, we need to analyze the data and answer the questions. The completed table for the frequency of food preferences is shown below: Food preferences Frequency Burgers 10Tacos 7Hot dogs 5Sandwiches 8Total 30
Part B: The percentage of customers who prefer each food item can be calculated by dividing the frequency of each item by the total number of customers and then multiplying by 100.Percentages of customers who prefer each food item: Food preferences Frequency Percentage Burgers 10 33.33%Tacos 7 23.33%Hot dogs 5 16.67%Sandwiches 8 26.67%Total 30 100%
Part C: The mode of the food preferences is the item with the highest frequency. In this case, burgers are the most preferred food item by the customers, with a frequency of 10. Therefore, the mode of the food preferences is burgers.
Know more about frequency table here:
https://brainly.com/question/24550175
#SPJ11
Find the matrix A in the linear transformation y = Ax, where x = [x 1 x2]" (x = [X 1 X2 X3]) are Cartesian coordinates. Find the eigenvalues and eigenvectors and explain their geometric meaning.
The eigenvalues and eigenvectors are greater than 1, it means that the transformation stretches the space along that direction.
To find the matrix A in the linear transformation y = Ax, we first need to know what the transformation does to each basis vector.
The geometric meaning of the eigenvalues and eigenvectors depends on the specific transformation encoded by the matrix A.
In general, the eigenvectors represent the directions along which the transformation stretches or compresses the space, while the eigenvalues indicate the magnitude of the stretching or compression. If an eigenvector has an eigenvalue of 1, it means that the transformation leaves that direction unchanged.
If an eigenvector has an eigenvalue greater than 1, it means that the transformation stretches the space along that direction. Conversely, if an eigenvector has an eigenvalue between 0 and 1, it means that the transformation compresses the space along that direction.
To know more about matrix here
https://brainly.com/question/28180105
#SPJ4
The ratio of hanks income spent on rent to his income spent on his car payment is 3 to 1. If he spends a total of $1640 on rent and car payment how much does he spend on each item?
Hank spends $1230 on rent and $410 on car payments.
Let x be the amount of money spent on rent by Hank, and y be the amount of money spent on car payments by Hank. The ratio of Hank's income spent on rent to his income spent on car payment is 3 to 1, that is, x:y = 3:1.In other words, 3y = x. We also know that Hank spends a total of $1640 on rent and car payment, so :x + y = $1640.
We can now solve the system of equations formed by these two equations:3y = xx + y = $1640.Substituting the first equation into the second equation to eliminate x, we get:3y + y = $16404y = $1640y = $410.So Hank spends $410 on car payments .To find how much he spends on rent, we can use the equation x = 3y: x = 3($410) = $1230.
Know more about car payment here:
https://brainly.com/question/6038815
#SPJ11
the length of eagle trail is 6 3/5 miles. the length of bear trail is 2 7/10 miles. what is the difference between length between eagle and bear trail?
The difference betwen the lengths of the eagle and bear trails is (3 + 9/10) miles.
What is the difference between length between eagle and bear trail?Here we just need to take the difference between the two given mixed numbers, to do that, we can group the whole parts and the fraction parts, we will get:
difference = (6 + 3/5) mi - (2 + 7/10) mi
difference = (6 - 2) + (3/5 - 7/10)
= 4 + 6/10 - 7/10
= 4 - 1/10 = 3 + 9/10
The difference betwen the lengths is (3 + 9/10) miles.
Learn more about lengths at:
https://brainly.com/question/24487155
#SPJ1
calculate the intrinsic enterprise value using the average of terminal values derived from the ev/ebitda multiple and perpetual growth methods. review later 485,416 387,294 451,512 421,684
The average intrinsic enterprise value for this company is approximately 436,977.
To calculate the intrinsic enterprise value, we need to consider multiple methods, such as the EV/EBITDA multiple and the perpetual growth method. Both of these methods involve making predictions about the company's future financial performance and using those predictions to estimate its overall value.
Now, let's talk about how we can use the average of these methods to calculate the intrinsic enterprise value. First, we need to gather some data. The numbers you provided - 485,416, 387,294, 451,512, and 421,684 - are likely the results of applying the EV/EBITDA and perpetual growth methods to the company in question.
To calculate the average intrinsic enterprise value, we simply add up these numbers and divide by the total number of values. In this case, we have four values, so we'll add them up and divide by four:
(485,416 + 387,294 + 451,512 + 421,684) / 4 = 436,977
To know more about average here
https://brainly.com/question/16956746
#SPJ4
Use the graph of the function to find its average rate of change from =x−4 to =x2.
The average rate of change of a function from x = -4 to x = 2 can be determined by finding the slope of the line connecting the two points on the graph corresponding to these x-values.
To find the average rate of change of a function from x = -4 to x = 2, we need to calculate the slope of the line connecting the two points on the graph. The average rate of change represents the average rate at which the function is changing over the given interval.
First, we identify the coordinates of the two points on the graph corresponding to x = -4 and x = 2. Let's assume the coordinates of the points are (-4, f(-4)) and (2, f(2)), where f(x) represents the function.
Next, we calculate the slope of the line connecting these two points using the formula: slope = (change in y) / (change in x). The change in y can be found by subtracting the y-coordinate of the first point from the y-coordinate of the second point, and the change in x is obtained by subtracting the x-coordinate of the first point from the x-coordinate of the second point.
Finally, we divide the change in y by the change in x to obtain the average rate of change. This value represents the average rate at which the function is changing over the interval from x = -4 to x = 2.
Learn more about slope here:
https://brainly.com/question/3605446
#SPJ11
calculate ∫166x x2dx, given the following. ∫16x2dx= 215 3 ∫67x2dx= 127 3 ∫16xdx
The following equation
∫166x x²dx = 9/2
∫16xdx = 18
∫67x²dx = 127/3.
To integration by substitution to solve the given integral.
Let u = x² then du/dx = 2x and dx = du/(2x).
Substituting for x and dx we get:
∫166x x²dx = ∫166x u du/(2x)
= (1/2)∫166x u¹ du
= (1/2) [(u²/2)|6]
= 1/4[u²|6]
= 1/4(6²)
= 9/2
∫166x x²dx = 9/2.
Now, using the given information we can evaluate the integral of 16x:
∫16xdx = x²/2|6
= 18.
And using the given information we can evaluate the integral of 67x²:
∫67x²dx = 127
∫166x x²dx = 9/2
∫16xdx = 18
∫67x²dx = 127/3.
For similar questions on Equation
https://brainly.com/question/22688504
#SPJ11
a grocer wants to mix two kinds of candy. one kind slls for 0.95 per pound and the other sells for 190 per pound. He wants to mix a total of 23 pounds and sell it for $1.90 per pound. How many pounds of each kind should he use in the new mix?
The grocer needs to mix 1 pound of the first kind of candy and 22 pounds of the second kind of candy to get 23 pounds of the new mix that will sell for $1.90 per pound.
Let's assume that the grocer needs to mix x pounds of the first kind of candy and y pounds of the second kind of candy to get a total of 23 pounds of the new mix.
We know that the new mix will sell for $1.90 per pound, so the total revenue from selling the new mix will be:
Revenue = $1.90 × 23 = $43.70
We can set up a system of equations based on the total weight of the mix and the total cost of the mix:
x + y = 23 (total weight of the mix)
0.95x + 1.90y = 43.70 (total cost of the mix)
We can solve this system of equations using substitution or elimination method. Here, we will use substitution:
x + y = 23
y = 23 - x (subtracting x from both sides)
0.95x + 1.90y = 43.70
0.95x + 1.90(23 - x) = 43.70 (substituting y = 23 - x)
0.95x + 43.70 - 1.90x = 43.70
-0.95x = -0.95
x = 1
Therefore, the grocer needs to mix 1 pound of the first kind of candy and 22 pounds of the second kind of candy to get 23 pounds of the new mix that will sell for $1.90 per pound.
To know more about grocer refer here:
https://brainly.com/question/28546761
#SPJ11
Find the derivative of the function f(x, y) = arctan(y/x) at point (−3, 3) in the direction the function increases most rapidly.
The derivative of the function f(x, y) = arctan(y/x) at point (−3, 3) is 1/3√2.
To find the derivative of the function f(x, y) = arctan(y/x) at the point (-3, 3) in the direction the function increases most rapidly, we first need to find the gradient of the function.
The gradient of a scalar function f(x, y) is given by the vector (∂f/∂x, ∂f/∂y).
Let's find these partial derivatives:
∂f/∂x = (-y)/(x^2 + y^2)
∂f/∂y = (x)/(x^2 + y^2)
Now, let's evaluate these partial derivatives at point (-3, 3):
∂f/∂x(-3, 3) = (-3)/((-3)^2 + 3^2) = 3/18 = -1/6
∂f/∂y(-3, 3) = (3)/((-3)^2 + 3^2) = -3/18 = 1/6
So, the gradient of f at the point (-3, 3) is (-1/6, 1/6).
To find the derivative of f in this direction, we need to take the dot product of the gradient vector with the unit vector in the direction of (-1/6, 1/6):
|(-1/6, 1/6)| = √-1/6²+ 1/6² = 1/3√2
So, the unit vector in the direction of (-1/6, 1/6) is given by:
u = (-1/6, 1/6) / (1/3√2) = (-1/√2, 1/√2)
The derivative of f in the direction of u is given by:
D(u)f = grad(f)(-3,3) · u
= (-1/6, 1/6) · (-1/sqrt(2), 1/sqrt(2))
= 1/6√2 + 1/6√2
= 1/3√2
Therefore, the derivative of f at (-3,3) in the direction of the vector (-1/6, 1/6) is 1/3√2.
Learn more about derivative of the function : https://brainly.com/question/12047216
#SPJ11
from sin(3) = 1 2 , solve for 3 on the interval [0, 2). (enter your answers as a comma-separated list.)
The solution for 3 on the interval [0, 2) is 3 = π/6, 13π/6 or 30°, 390°.
To solve for 3 from sin(3) = 1/2 on the interval [0, 2), we need to use the inverse sine function (arcsin) and solve for the angle whose sine is equal to 1/2.
arcsin(1/2) = 30° or π/6 radians
Since the interval is [0, 2), we need to add 2π to the angle if it is less than 0 or greater than or equal to 2π.
So, the solution for 3 on the given interval is:
3 = π/6 or 30°, or
3 = π/6 + 2π = 13π/6 or 390°
Therefore, the solution for 3 on the interval [0, 2) is 3 = π/6, 13π/6 or 30°, 390°.
To know more about Inverse Sine Function visit:
https://brainly.com/question/29547271
#SPJ11
The double dot plot blow shows the quiz scores out of 20 points for two different class periods. Compare the centers and variations of that two populations. Round to the nearest tenth. Write an inference you can draw about the two populations
The double dot plot shows the quiz scores for two different class periods, represented by the two sets of data points. Each data point represents the score of a single student on the quiz.
The first population, represented by the data points on the left side of the plot, appears to have a center at around 16-18 points and a variation that is more spread out. This suggests that the students in this class period had a wider range of quiz scores, with some students scoring higher and some scoring lower.
The second population, represented by the data points on the right side of the plot, appears to have a center at around 8-10 points and a variation that is more tightly clustered. This suggests that the students in this class period had a narrower range of quiz scores, with fewer students scoring higher and fewer scoring lower.
Based on these observations, an inference that can be drawn about the two populations is that the class period with higher quiz scores had more students who performed well on the quiz, while the class period with lower quiz scores had fewer students who performed well on the quiz. This suggests that the level of student proficiency in the subject may vary across class periods, and that it may be important to consider this variability when designing instructional strategies.
Learn more about variations visit : brainly.com/question/2098610
#SPJ11
An antibiotic is attacking a bacterial infection so quickly that the number of bacteria is exponentially decreasing continuously. Originally there were 2 million bacteria and now there are 0. 5 million bacteria. Using k = 0. 05 for the hourly rate of decay, how many hours did it take to its current level?
about 13. 9 hours
about 9. 9 hours
about 16. 6 hours
about 27. 7 hours
It took approximately 13.9 hours for the antibiotic to reduce the number of bacteria from 2 million to 0.5 million, based on a decay rate of 0.05 per hour.
The decay of bacteria can be modeled using exponential decay, where the rate of decay is proportional to the current population. In this case, the decay rate is given as k = 0.05 per hour.
We can use the exponential decay formula: N(t) = N₀ * [tex]e^{-kt}[/tex], where N(t) is the population at time t, N₀ is the initial population, k is the decay rate, and e is the base of the natural logarithm.
Given that N₀ = 2 million and N(t) = 0.5 million, we can solve for t. Plugging in the values into the formula, we get:
0.5 million = 2 million * [tex]e^{-0.05t}[/tex]
Dividing both sides by 2 million, we have:
0.25 = [tex]e^{-0.05t}[/tex]
Taking the natural logarithm of both sides to isolate the exponent, we get:
ln(0.25) = -0.05t
Solving for t, we have:
t = (ln(0.25)) / (-0.05) ≈ 13.9 hours
Therefore, it took approximately 13.9 hours for the antibiotic to reduce the number of bacteria from 2 million to 0.5 million.
Learn more about reduce here:
https://brainly.com/question/13358963
#SPJ11
If the original quantity is 15 and the new quantity is 24, what is the percent increase?If the original quantity is 15 and the new quantity is 24, what is the percent increase?
To calculate the percent increase between the original quantity (15) and the new quantity (24), we use the formula: Percent increase = [(new quantity - original quantity) / original quantity] * 100. The result represents the percentage by which the quantity has increased.
To find the percent increase between the original quantity (15) and the new quantity (24), we subtract the original quantity from the new quantity and divide it by the original quantity. The formula is:
Percent increase = [(new quantity - original quantity) / original quantity] * 100
Substituting the given values:
Percent increase = [(24 - 15) / 15] * 100
= (9 / 15) * 100
= 0.6 * 100
= 60%
Therefore, the percent increase between the original quantity of 15 and the new quantity of 24 is 60%. This means that the quantity has increased by 60% from the original value.
Learn more about percent increase here
https://brainly.com/question/11337309
#SPJ11
Simplify: -8(b-k) - 3(2b + 5k)
Answer:
-14b + 3k
Step-by-step explanation:
First we can divide the equation up:
(-8(b-k)) - (3(2b+5k))
Let's do distribution with the first parentheses:
-8b + 8k
Let's do distribution with the second parentheses:
6b+5k
Now we have:
(-8b+8k) - (6b+5k)
= -14b + 3k
The dance team sold tickets to their performance. Student tickets cost $5 and adult tickets cost $7. The dance team sold 57 tickets and made $395. Find the number of students and adult tickets sold
The number of adult tickets sold is 55 and the number of student tickets sold is 2.
Let the number of student tickets be x and the number of adult tickets be y.
Step 1: Constructing the equations
Given,Student tickets cost $5 and adult tickets cost $7.The dance team sold 57 tickets and made $395. In order to find the number of student and adult tickets sold, we need to construct two equations.Using the given information, we can write the following equations:
x + y = 57 (Equation 1)
5x + 7y = 395 (Equation 2)
Step 2: Solving the equations We need to solve the equations we have constructed to find the values of x and y. We can do this using the elimination method by multiplying the first equation by 5 and subtracting the second equation from it.
5x + 5y = 285 (Multiplying Equation 1 by 5)
5x + 7y = 395 (Equation 2)2y = 110
(Subtracting Equation 2 from Equation 1)
y = 55 (Dividing by 2)
Now we can substitute y = 55 in Equation 1 to find x:
x + 55 = 57 (Substituting y = 55) x = 2
Therefore, the number of adult tickets sold is y = 55 and the number of student tickets sold is x = 2.
To know more about equation visit :
https://brainly.com/question/29174899
#SPJ11