For the following reaction, 29.9 grams of sulfur dioxide are allowed to react with 6.26 grams of oxygen gas . sulfur dioxide(g) + oxygen(g) sulfur trioxide(g) What is the maximum mass of sulfur trioxide that can be formed? grams What is the FORMULA for the limiting reagent? What mass of the excess reagent remains after the reaction is complete? grams

The structures of ethane, ethene, and ethyne. show all hydrogen atoms is given below.

Ethane is a hydrocarbon molecule with the chemical formula C2H6. It is composed of two carbon atoms joined by a single covalent bond and six hydrogen atoms bound to the carbons. The structural formula of ethane is shown below. All six hydrogen atoms are explicitly shown.

Ethene
Ethene is a hydrocarbon molecule with the chemical formula C2H4. It is composed of two carbon atoms joined by a double covalent bond and four hydrogen atoms bound to the carbons. The structural formula of ethene is shown below. All four hydrogen atoms are explicitly shown.
Ethyne
Ethyne is a hydrocarbon molecule with the chemical formula C2H2. It is composed of two carbon atoms joined by a triple covalent bond and two hydrogen atoms bound to the carbons. The structural formula of ethyne is shown below. Both hydrogen atoms are explicitly shown.

To know more about Ethane click-
https://brainly.com/question/28168286
#SPJ4

Nuclear binding energy is defined as the minimum amount of energy required to disassemble or break down an atom's nucleus into the subatomic particles that make it up (which are protons and neutrons).

Protons and neutrons, a pair of subatomic particles found in the nucleus, are collectively referred to as nucleons.The difference between nuclear attraction and the disruptive energy of the electric force constitutes the net binding energy associated with a certain nucleus.

It is important to note that as the number of nucleons in the nucleus increases, so does the net binding energy per nucleon.As a result, the atomic number is inversely proportional to the net binding energy per nucleon. Using the formula BE=(m)c2, where m is the mass defect, get the total binding energy (BE).

BE divided by A yields the binding energy per nucleon (BEN) (Equation 10.3. 3). BE=[2mp+2mn]−m(4He)c2. Say, for instance, that we have a nucleus of mass MA and Z protons, N neutrons, and A.

To learn more about binding energy per nucleon refer to:

https://brainly.com/question/15712043

#SPJ4

Zeroth order represents one of the choices that is correct for this reaction, according to the statement that is given.

The conversion of one or more elements, known as reactant molecules, into one maybe more chemical drugs, known as products, is referred to as a reaction mechanism. Entities are composed of chemical elements or compounds.

Combustion, combination, decomposition, single-replacement, and double-replacement are the five fundamental categories of chemical reactions. You can categorize a reaction by looking at the reactants and the products of the reaction in question. More than single category will apply to some reactions.

To know more about Reaction visit:

https://brainly.com/question/25769000

#SPJ4

The complete question is-

The graphs below all refer to the same reaction. What is the order of this reaction?

first order

second order

Unable to predict

zeroth order

The red light emitted by a neon sign has a frequency of 4.5410^11 Hz.

Frequency is the number of waves which passes through a fixed point at a certain time.

Here,

The frequency of the red light emitted by a neon sign is 4.54×10¹¹ Hz

Given neon sign with a wavelength of 659.9nm​

frequency of the red light is to be calculated

Wavelength and frequency are related to each other by Wavelength=Speed/frequency

speed of light is 3×10⁸ m/s

Wavelength=659.9nm that is equal to 6.599 ×10⁻⁷m

Frequency =3×10⁸ m/s÷6.599 ×10⁻⁷m

Frequency =4.54×10¹¹ Hz

The frequency of the red light emitted by a neon sign is 4.54×10¹¹ Hz.

To know more about frequency,

https://brainly.in/question/28379775

#SPJ4

Answer: C. Melting Ice

Explanation: The rest are chemical changes, the ice is the same substance (water), just changing physical forms, solid --> liquid

N2O5 Nitrogen Oxide have the same empirical formula. The simplest whole number ratio of atoms present in a substance is its empirical formula in chemistry.

To learn more about empirical formula refer to:

https://brainly.com/question/14854985

#SPJ4

Answer:

The next part is 4, 16, 32

Explanation:

just did it on edge :))

The equation for the phosphorus by mass of the compound with the chemical formula of X3P2 is:%Phosphorus=2×(MolarMassofPhosphorus)/MolarMassofthecompound×100.

Given in this issue is a phosphorus compound with a mass percentage of 34.0 percent phosphorus and the formula x, 3 p 2. Now that x must be identified, the formula is x, 3, p, 2.

There are two phosphorus atoms present, and their combined mass will be 31.0 grammes per mole. That equates to 62.0 g/mol. Given in this issue is a phosphorus compound with a mass percentage of 34.0 percent phosphorus and the formula x, 3 p 2.

Now that x must be identified, the formula is x, 3, p, 2. There are two phosphorus atoms present, and their combined mass will be 31.0 grammes per mole. That equates to 62.0 g/mol.

To learn more about  phosphorus compound refer to:

https://brainly.com/question/29863039

#SPJ4

To find the volume of 25% (w/v) solution HNO3, you need to know the mass of HNO3 and the total volume of the solution.

What do you mean by volume?

Volume is a measure of the amount of space taken up by a three-dimensional object or substance. It is commonly used to measure the amount of a liquid, gas, or solid. In chemistry, volume is usually expressed in units such as liters (L), milliliters (mL), cubic centimeters (cm3), or milligrams (mg).

For example, if the total volume of the solution is 100 mL and the mass of HNO3 is 25 g, then the volume of 25% (w/v) solution HNO3 is 25 mL.

To know more about volume,

https://brainly.com/question/28564792

#SPJ1

O Sodium methoxide + (S)-3-bromoheptane is the reactions would produce (S)-3-methoxyheptane in high yield.

There are 26 atoms in the (S)-3-methylheptane molecule (s). Eight carbon atoms and 18 hydrogen atoms are present (s). Therefore, C8H18 can be used to represent the chemical formula of (S)-3-Methylheptane.

The molecular formula, as opposed to the empirical formula, which gives the numerical proportions of atoms of each kind, is the basis for the chemical formula of (S)-3-Methylheptane, which is based on the molecular formula and does not include structural information.

According to the rule of conservation of mass, a chemical reaction does not cause a change in the amount of any one of the elements included in a chemical formula. In light of the chemical formula, each side of the equation must therefore represent the same amount of any given element.

To know more about atoms visit: https://brainly.com/question/1566330

#SPJ4

The pH of the solution is 5.07.

We know that when we mix the sodium acetate with a solution of acetic acid what we are going to have is a buffer. We know that the buffer is the kind of solution that we are able to get from a weak acid and its salt just as acetic acid and sodium acetate.

We know that;

Molarity of the salt = 0.43/0.5 L = 0.86 M

Molarity of the acid = 0.21/0.5 L = 0.42 M

Hence;

pH = pKa + log(salt/acid)

pH = 4.76 + log(0.86/0.42)

pH = 5.07

We would have a pH of 5.07

Learn more about pH:https://brainly.com/question/15289714

#SPJ1

The sawhorse projection of the molecule below can be translated into a wedge-and-dashed Cram projection by rotating the molecule 90 degrees so that the hydrogen atoms are on the left and the oxygen atom is on the right.

Projection is a method of displaying data or information in a visual format, such as a graph, chart, map, or diagram. It is used to display relationships between two or more variables, such as a change in population over time. It can also be used to show the relationship between multiple variables, such as the correlation between unemployment and poverty. Projection is an important tool for data analysis and decision making, as it provides a visual representation of data that is easier to interpret than tables and equations.

Then, the bonds between the carbon and hydrogen atoms are represented by wedges, while the double bond between the carbon and oxygen atoms is represented by a dashed line. This results in the following Cram projection:

H3C-O-C-H2.

To know more about projection click-
https://brainly.com/question/30007904
#SPJ4

The empirical formula of a compound is NaO, and the approximate molar mass is 76 g.The answer then is Na2O2.

An empirical formula is a compound's Chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms. This would be the compound's element with the lowest whole number ratio.

To know more about  Empirical formula refer to:

https://brainly.com/question/1603500

#SPJ1

Answer:

The proportionality constant of the spring is 0.42857 N/cm.

Explanation:

The proportionality constant (k) of a spring is given by the equation: force (F) = k * displacement (x)

k = F / x

Therefore, to find the proportionality constant of the spring, we can divide the force applied (75 N) by the displacement (175 cm)

k = 75 N / 175 cm

k = 0.42857 N/cm

The proportionality constant of the spring is 0.42857 N/cm.

The three-dimensional representation for the R enantiomer of the molecule shown below:

An enantiomer is one of two stereoisomers that are not superposable onto their own mirror image in chemistry. It is also known as an optical isomer, antipode, or optical antipode. Enantiomers, like one's right and left hands, cannot be superposed on one other when staring at the same face. The chiral compound's enantiomers are named using the "right hand" and "left hand" nomenclature. The stereocenters are denoted by the letters R or S. Consider the first image: a curved arrow is drawn from the most important (1) substituent to the least important (4) substituent.

Here,

The following is a three-dimensional depiction of the molecule's R enantiomer:

To know more about R enantiomer,

https://brainly.com/question/28875775

#SPJ4

Answer: [tex]K_{2}[/tex]O + [tex]H_{2}[/tex]O --> 2KOH

Explanation: To balance a chemical equation the atoms of an element on product side is equal to reactant side.

The dependent variable in this experiment is the number of migraines recorded in the study (option A).

Dependent variable in an experiment is the outcome measured to see the effectiveness of the treatment.

In an experiment, the independent variable is altered or changed to bring about a response in the dependent variable.

According to this question, if a scientist was attempting to decide what type of light was best for reducing migraines, the number of migraines recorded is the dependent variable.

Learn more about dependent variable at: https://brainly.com/question/1479694

#SPJ1

The final balanced redox reaction in the basic solution is:

O2 + 2H2O + Cr3+ → H2O2 + Cr2O7^2- + 4OH-

Generally, The half-reaction method involves breaking the overall redox reaction into two half-reactions: oxidation and reduction. The oxidation half-reaction is:

Cr3+ → Cr2O7^2- + 3e-

The reduction half-reaction is:

O2 + 2H2O + 4e- → 4OH-

To balance the electrons in the oxidation half-reaction, we need to add 3 electrons on the right side. To balance the electrons in the reduction half-reaction, we need to add 4 electrons on the left side.

When we combine the two half-reactions, we get:

O2 + 2H2O + Cr3+ → H2O2 + Cr2O7^2- + 3e-

We then add 4OH- on the right side to neutralize the electrons on the left side, giving us:

O2 + 2H2O + Cr3+ → H2O2 + Cr2O7^2- + 3e- + 4OH-

Read more about oxidation

https://brainly.com/question/9496279

#SPJ1

The Z value is the atomic number of an atom, which is the number of protons in the nucleus of an atom.

The nucleolus is a specialized structure located in the nucleus of a eukaryotic cell. It is composed of proteins and RNA molecules, and is responsible for the production, assembly, and transport of ribosomes. The nucleolus is the site of transcription, processing, and assembly of ribosomal RNA (rRNA) precursors into the ribosomal subunits that make up the ribosome. The ribosome is the cell's protein-synthesizing machinery, and the nucleolus is essential for its production. The ribosomes are then released into the cytoplasm, where they can translate mRNA into proteins.

The N value is the number of neutrons in the nucleus of an atom, and A is the mass number, which is the sum of the number of protons and neutrons in the nucleus of an atom.

For the first pair of atoms, ^3_1 H and ^3_2 He, the Z value for both is 3, since both have 3 protons in their nucleus. However, the N value for ^3_1 H is 1 and the N value for ^3_2 He is 2. Therefore, ^3_2 He has one more neutron in its nucleus than ^3_1 H. Lastly, the A value for ^3_1 H is 1 and the A value for ^3_2 He is 4. Therefore, the mass number of ^3_2 He is 3 times higher than ^3_1 H.

For the second pair of atoms, ^14_6 C and ^15_7 N, the Z value for both is 6, since both have 6 protons in their nucleus. The N value for ^14_6 C is 8 and the N value for ^15_7 N is 7. Therefore, ^15_7 N has one less neutron in its nucleus than ^14_6 C. Lastly, the A value for ^14_6 C is 14 and the A value for ^15_7 N is 15. Therefore, the mass number of ^15_7 N is 1 higher than ^14_6 C.

For the third pair of atoms, ^19_9 F and ^18_9 F, the Z value for both is 9, since both have 9 protons in their nucleus. The N value for ^19_9 F is 10 and the N value for ^18_9 F is 9. Therefore, ^18_9 F has one less neutron in its nucleus than ^19_9 F. Lastly, the A value for ^19_9 F is 19 and the A value for ^18_9 F is 18. Therefore, the mass number of ^18_9 F is 1 lower than ^19_9 F.

To know more about nucleolus click-
https://brainly.com/question/28237246
#SPJ4

It is a tertiary alkyl halide that is being supplied. It will easily go through the SN1 replacement. The following steps will lead to the reaction(Attached).

A reactant known as a nucleophile provides an electron pair in order to create a covalent bond. Typically, a nucleophile has a negative charge or is neutral with one or two donatable electrons. Some examples include H2O, -OMe, or -OtBu. The species with a lot of electrons is a nucleophile overall.

A nucleophile typically has one electron pair and is negatively charged or neutral. Some examples include H2O, -OMe, or -OtBu. The species with a lot of electrons is a nucleophile overall. Generally speaking, electrophiles are positively charged or neutral organisms with vacant orbitals that are drawn to an electron-rich center.

Know more about nucleophile

https://brainly.com/question/14052597

#SPJ4

The chemical element calcium has the atomic number 20 and the letter Ca as its symbol. Calcium is an alkaline earth metal that reacts with air to create a black oxide-nitride coating.

With the chemical symbol Ca and atomic number 20, calcium is a member of the calcium family. Calcium is a reactive metal and an alkaline earth metal that, when exposed to air, develops a shady oxide-nitride layer.

In this article, the arsenic acid formula—also known as orthoarsenic acid formula or as arsoric acid formula—is explored. Three hydroxyl and one oxo group make up this arsenic oxoacid.

Arsenopyrite is the mineral with the greatest prevalence of arsenic. Realgar, orpiment, and enargite are some more minerals. Most arsenic is created as a byproduct of the copper and lead refining process.

Metal calcium and water interaction - Less vehemence is produced when calcium metal combines with water.

Therefore, the correct answer is option e) Ca3As2.

To learn more about calcium refer to:

https://brainly.com/question/26636816

#SPJ4

I ClCH2CH2CH2Cl (c)

Thereby,

The (n+1) rule, where n is the number of hydrogen atoms bonded to a neighbouring carbon atom, is used to calculate the multiplicity of the three signals as follows:

CH3CH2COOCH(CH3)2

It may appear as:

CH3ーCH2ーCOーOーCHー(CH3)2

The given compound contains a total of 4 equivalent protons. Consequently, the 1H-NMR spectrum shows 4 signals.

The (n+1) rule, as given in the above part I is once more used to calculate the multiplicity of the four signals.

1. The number of 6 H molecules in the two CH3 groups is equal to n+1.

To learn more about  compound refer to:

https://brainly.com/question/26487468

#SPJ4

As the acid weakens, the pH at the equivalence point rises (becomes more basic). The amount of extra base required to achieve the equivalence point grows.

Titration is a standard quantitative chemical analysis laboratory method for determining the concentration of a specified analyte. The titrant or titrator is a reagent that is produced as a standard solution of known concentration and volume. A titration is a procedure that uses a known solution to determine the concentration of an unknown solution. Typically, until the reaction is complete, the titrant (the known solution) is added from a buret to a known quantity of the analyte (the unknown solution). A titration is described as 'the process of calculating the quantity of a material A by adding calibrated increments of substance B, the titrant, with which it interacts until precise chemical equivalency (the equivalence point) is obtained'.

Here,

The pH at the equivalency point rises as the acid diminishes (becomes more basic). The quantity of additional base needed to reach the equivalence point increases.

To know more about titration,

https://brainly.com/question/2728613

#SPJ4

the average rate of change of B from t=0 s to t=402 s. A ---> 2B with

Time: Concentrations of A: 0 0.710, 201 0.430, 402 0.150 is 0.07%

To determine the average rate of change of B from t=0 s to t=402 s, we need to find the change in concentration of B (delta B) and divide it by the change in time (delta t). From t=0 s to t=201 s, the concentration of A changes from 0.710 to 0.430. Since the reaction is A ---> 2B, we can assume that the concentration of B doubles the concentration of A. So, the concentration of B changes from 0.710/2 = 0.355 to 0.430/2 = 0.215.The change in concentration of B is 0.215 - 0.355 = -0.140

From t=201 s to t=402 s, the concentration of A changes from 0.430 to 0.150. Using the same assumption, the concentration of B changes from 0.215 to 0.150/2 = 0.075. The change in concentration of B is 0.075 - 0.215 = -0.140 The total change in concentration of B is the sum of the two changes, which is -0.140 + (-0.140) = -0.280. The total change in time is 402s - 0s = 402sTherefore, the average rate of change of B is -0.280 / 402s = -0.000696, or -0.07% (two significant figures)

learn more about rate of change here:

https://brainly.com/question/29518179

#SPJ4

17.1 grams of LiCl is equal to 0.6 moles of LiCl.

An ionic compound is a chemical compound composed of ions held together by electrostatic forces termed ionic bonding. It is a type of chemical bond that generates two oppositely charged ions, typically a cation (positive ion) and an anion (negative ion). In other words, ionic compounds are formed when a metal and a non-metal react to form a salt. Examples of ionic compounds include table salt (NaCl), baking soda (NaHCO3), and calcium chloride (CaCl2).

Since LiCl is an ionic compound, it is composed of both Li+ and Cl- ions. Each mole of LiCl contains 6.023 x 1023 formula units, which is the same as 6.023 x 1023 atoms. Therefore, 17.1 grams of LiCl contains 3.61 x 1024 atoms of Li+ and 3.61 x 1024 atoms of Cl-.

To know more about ionic compound click-
https://brainly.com/question/2687188
#SPJ4

Dichloromethane is the chemical name for this substance. Nitrous oxide is the name given to this chemical. Sulfur trioxide is the chemical formula for this substance.

The three-dimensional arrangement of atoms in a molecule is known as electron group geometry. A molecule's geometry is a significant feature that influences the physical and chemical characteristics of a substance. Thus, the "Electron Group" geometry of each center atom in a structure may be established simply by counting the number of "groups" of electrons surrounding the atom and then imagining how those groups would organize themselves to be as far apart as feasible. Any sort of bond—single, double, or triple—and lone electron pairs are the two types of electron groups. The initial step in applying VSEPR to simple molecules is to count the number of electron groups surrounding the core atom. Keep in mind that a multiple bond only counts as one electron group.

Here,

a). SO₃

 This compound is known as sulfur trioxide.

 The molecular shape of sulfur trioxide is trigonal planer.

  And the bond angle is 120°.

b). N₂O

  This compound is known as Nitrous oxide. Here, nitrogen is in the center.     There is no lone pair around the nitrogen atom and it forms two sigma bonds with the other two atoms.

It is linear in shape.

 The bond angle between them is 180°.

c). CH₂Cl₂

 This compound is known as the Dichloromethane

  The molecular shape of the compound is tetrahedral.

  The bond angles is 120°

This compound is known as the Dichloromethane. This compound is known as Nitrous oxide. This compound is known as sulfur trioxide.

To know more about electron-group arrangements,

https://brainly.com/question/23639334

#SPJ4

The total number of atoms in 0.111 mole of Fe(CO)3(PH3)2 is 1.00 × 10^24.

To calculate the number of atoms first we need to calculate the number of moles. In 1 mole of a substance, the number of atoms is NA or 6.023×1023 atoms. This number is also known as Avogadro's number. Multiplying the given moles with NA gives the total number of atoms.

Here, we will find the total number of moles of each element. So let us consider element present in the compound and number of moles of that element. Such that Fe- 1, C- 3, O - 3 , P – 2 , H – 6 . So total number of atoms molecule is 15. The number of atoms in 0.111 moles of Fe(CO)3(PH3)2, therefore 15 x 0.111 which gives 1.665 moles of atom. That is 1.665 x 6.023 x 10^23. This gives the value as 1.00 x 10^24.

Learn more about atoms here:

https://brainly.com/question/13973654

#SPJ4

Atoms one of the following ketones, all of which contain hydrogen atoms (C5H10), would be created using alcohol.

The chemical formula of hydrogen is H2, and it has an molar mass of 1. The atomic number one of the lightest element is hydrogen, abbreviated H. It is a gas at room pressure and temperature that has the functional group H2 hydrogen chloride (HCl), which is a combination of elements hydrogen and chlorine. It is also tasteless, odorless, and highly combustible. Hydrochloric acid is the name given to a gaseous solution in water.

As a result, when two hydrogen atoms bind, they share electrons. The term for this is covalent bonding. In your forthcoming classes, you will receive a detailed introduction to it. Consequently, hydrogen is H2 rather than H.

To know more about Atoms visit :

https://brainly.com/question/1566330

#SPJ1

Both B and C reaction between ethyl butanoate and ethyl amine.

Amines are organic compounds derived from ammonia by replacing one, two, or all three hydrogen atoms with alkyl or aryl groups. They are classified as primary, secondary, and tertiary amines depending on the number of carbon atoms connected to the nitrogen atom. Amines have a strong smell, and many of them are used in the production of pharmaceuticals, dyes, and other products. Amines are also important intermediates in the synthesis of many organic compounds.

In the reaction between ethyl butanoate and ethyl amine, both 1-butanol and N-ethylbutanamide are formed. Ethyl butanoate is an ester, which consists of an alcohol and an acid joined together. When ethyl amine is added, the ester breaks apart, releasing the acid and alcohol components. The acid component is then protonated by the amine, forming N-ethylbutanamide. The alcohol component, which is 1-butanol, is also released in the reaction.

To know more about amines click-
https://brainly.com/question/27511377
#SPJ4