The expected product resulting from the addition of Br₂ to (E)-3-hexene is a mixture of optically active enantiomeric dibromides, specifically (3R, 4R) and (3S, 4S) isomers. This is because (E)-3-hexene is an achiral molecule, and the addition of Br₂ to the double bond results in the formation of a chiral center at the 3rd and 4th carbon atoms. As a result, two pairs of enantiomers are produced.
Additionally, a meso dibromide is also formed, specifically the (3R, 4S) or (3S, 4R) isomer. This compound is achiral despite having chiral centers because it possesses a plane of symmetry that allows for internal cancellation of the chiral properties.
Therefore, the products obtained from the addition of Br₂ to (E)-3-hexene are a mixture of optically active enantiomeric dibromides, a meso dibromide, and (E)-3,4-dibromo-3-hexene.
To know more about the optically active enantiomeric refer here :
https://brainly.com/question/30176248#
#SPJ11
What is the electron configuration for a calcium atom? 01s². 2s 2.2p5.3s 2.3p 5.4s¹ 02s², 2s ², 2p5.3s 2.3p 6,4s1 01s 2. 2s 2. 2p5.3s 2.3p 5, 452 Ots1,2s2, 2p5.3s 2.3p5,4s¹
Answer:
Ca = 1s²2s²2p⁶3s²3p⁶4s²
Explanation:
Calcium is located in the second column and the 4th row of the periodic table. Thus, there are 2 valence electrons and the highest quantum number is 4. This is represented by 4s². However, all of the previous orbitals and electrons must be listed beforehand, making the entire electron configuration: 1s²2s²2p⁶3s²3p⁶4s².
Which one of the following terms is used to describe a loan wherein each payment is equal in amount and includes both interest and principal
amortized loan one of the following terms is used to describe a loan wherein each payment is equal in amount and includes both interest and principal.
What is an amortized loan?
A loan that is amortized requires the borrower to pay interest and principal over time. A three-year investment yields 5% a year in interest, paid out semi-annually.An amortized loan payment initially covers the interest cost for the period; any balance is applied to the principle balance.What does it mean when a loan is amortized?
A loan that is amortized over a predetermined period of time is a type of financing. The borrower pays the same amount over the course of the loan under this form of repayment plan, with the initial portion going toward interest and the remaining sum being applied to the existing loan principal.Learn more about amortized loan
brainly.com/question/13514748
#SPJ4
In what way did political policies act as a centrifugal force in the Soviet Union during the late 1980s
The government gave the people more freedom to criticize the government which led to nationalist movements
What way did political policies act as a centrifugal force in the Soviet Union during the late 1980s ?In the late 1980s, the economic and social situation in the Soviet Union was tense. The socialist economy was on the verge of collapse, the war in Afghanistan was an assured defeat, and the quality of life for Soviet citizens was appalling.
Due to these situations, the Soviet leader Mikhail Gorbachev decided to carry out a series of economic and political reforms, known as Perestroika and Glasnost, aimed at liberalizing the economy from a pure socialist model to a mixed model, and granting greater rights and civil liberties to the citizens.This led to numerous mobilizations and demonstrations, which further weakened the already weak Soviet political apparatus and made possible the emergence of regionalist nationalisms in the former Soviet nations, especially those subjugated to the power of Russia.Learn more about Soviet Union here:
https://brainly.com/question/1310325
#SPJ4
What best defines an extensive property of a substance? (4 points) A property that is observable A property that is measurable A physical property that depends on the sample size A physical property that is not dependent on sample size
Answer:
A physical property that depends on the sample size
Explanation:
If a reaction occurs, what will be the products of the unbalanced reaction below?
Zn(s) + HCl(aq) -->
A. No reaction will occur
B. ZnH(s) + Cl2(g)
C. ZnCl2(s) + H2(g)
D. HZnCl(s)
Answer:
C) ZnCl2(s) + H2(g)
Explanation:
On reaction between Zn and HCl, Zn is more reactive than Hydrogen thus displacing it from HCl making a bond with two atoms of chlorine and releases hydrogen gas.
The equation of reaction
Zn(s) + HCl(aq) => ZnCl2(s) + H2(g).
Therefore, the required products are ZnCl2(aq) and H2(g).
Will mark you brainliest and give you 15 points!!
what is the mass of 22.4 l of n2 at stp? (5 points)
a
11.2 grams
b
14.00 grams
c
22.4 grams
d
28.01 grams
Answer:
d
Explanation:
22.4 L is the same as 1 mol.
Diatomic nitrogen has a formula mass of 28.01 g/mol, so the answer is d.
A sample of food is put into a bomb calorimeter and its caloric content is measured. The final measurement reads 100 (large) Calories. How many joules of energy does this food contain
The amount of energy, in Joules, that the food contains will be 414.8 Joules
Calories to Joule conversionAccording to metrics, 1 kilocalorie = 4184 Joules.
100 Calories = 100/1000 = 0.1 kiloCalories.
0.1 kilocalories = 0.1 x 4184 = 414.8 Joules
More on metric conversions can be found here: https://brainly.com/question/10943201
#SPJ1
25. Which is an irreversible process?
1) mixing of two gases by diffusion
2) Evaporation of water at 373k and 2atm
pressure
3) Dissolution of Nacl in water
4) All are correct
(S
The answer is 1) mixing of two gases by diffusion.
Once 2 gases are mixed by diffusion, they cannot be obtained from the mixture of gases. Hence, it is considered to be an irreversible process.
Determine the molarity of a solution that contains 30 moles naoh in 0.80 liters of solution?
Taking into account the definition of molarity, the molarity of a solution that contains 30 moles naoh in 0.80 liters of solution is 37.5 [tex]\frac{moles}{liters}[/tex].
Definition of molarityMolar concentration or molarity is a measure of the concentration of a solute in a solution and indicates the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of solute by the volume of the solution:
[tex]Molarity=\frac{number of moles}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liters}[/tex].
This caseIn this case, you have:
number of moles= 30 molesvolume= 0.80 LReplacing in the definition of molarity:
[tex]Molarity=\frac{30 moles }{0.80 L}[/tex]
Solving:
Molarity= 37.5 [tex]\frac{moles}{liters}[/tex]
Finally, the molarity of a solution that contains 30 moles naoh in 0.80 liters of solution is 37.5 [tex]\frac{moles}{liters}[/tex].
Learn more about molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
#SPJ1
i need help with these two questions, i been stuck for 2 hours
1. The mass of Fe2O3 required will be 51.29 grams
2. The mass of Cu that will be formed is 36 kg
Stoichiometric problems1) The equation of the reaction goes thus: [tex]2Fe_2O_3 + 3Pt --- > 3PtO_2 + 4Fe[/tex]
Mole ratio of Fe to Fe2O3 = 2:1
Mole of 35.9 g Fe = 35.9/56 = 0.6411 mol
Equivalent mole of Fe2O3 = 0.6411/2 = 0.3205 mol
Mass of 0.3205 mol Fe2O3 = 0.3205 x 160 = 51.29 grams
2) [tex]2CuO --- > 2Cu + O_2[/tex]
Mole ratio of CuO to Cu = 1:1
Mole of 45 kg CuO = 45000/80 = 562.5 mol
Equivalent mole of Cy = 562.5 mol
Mass of 562.5 mol of Cu = 562.5 x 64 = 36,000 grams or 36 kg
More on stoichiometric problems can be found here: https://brainly.com/question/15047541
#SPJ1
Question 7 of 10
Carbonic anhydrase is an enzyme in the human body that participates in the
reaction shown below:
CO₂ + H₂O → H₂CO3
How will this reaction be affected if carbonic anhydrase acts as a catalyst?
OA. CO₂ and H₂O will be produced.
OB. H₂CO3 will be produced faster.
OC. H₂CO3 will be produced more slowly.
OD. H₂CO3 will not be produced at all.
SUBMIT
H₂CO₃ will be produced faster if carbonic anhydrase acts as a catalyst and the correct option is option B.
What is Carbonic Anhydrase?Carbonic anhydrase enzyme helps to maintain acid-base homeostasis, fluid balance and regulate pH. Based on its location, the enzyme role changes slightly.
The inter-conversion that occurs between water, carbon dioxide, and dissociated carbonic acid ions, is catalyzed by a group of enzymes that form by carbonic anhydrase, or carbonate dehydratase.
The active site for most carbonic anhydrase is supposed to be a zinc ion, and it is as a result classified as metalloenzymes.
Therefore, H₂CO₃ will be produced faster if carbonic anhydrase acts as a catalyst and the correct option is option B.
Learn more about Carbonic Anhydrase, here:
https://brainly.com/question/24164978
#SPJ5
Each coin has a mass of 21.94 g and a volume of 2 mL which of the following metals are the coins made of
Answer:
A.
Explanation:
The density of each element represents the mass (grams) per every 1 milliliter Therefore, if each coin is 2 milliliters, you need to divide the given mass by 2.
21.94 grams / 2 mL = 10.97 grams / 1 mL
This matches the density of silver.
What is the amount of space occupied by a sample of matter
The amount of space that matter occupies is called its volume. Solids, liquids, and gases all have volume.
Noble gases are the least reactive elements on the periodic table
True or false
True. Noble gases are the least reactive elements on the periodic table
What are noble gases?They are a group of elements with completely filled orbitals. In other words, they have zero valence electrons.
Without having valence electrons, it becomes difficult for this group of elements to form bonds with other elements either by electron donation or sharing.
However, they can be made to form bonds with other elements under special conditions.
Thus, they are the least reactive of all the elements in the periodic table.
More on noble gases can be found here: https://brainly.com/question/11764545
#SPJ1
Answer:
TRUE!"Why?"
The Noble Gases have eight valence electrons, which fill their outer energy level. This is the most stable arrangement of electrons, so noble gases rarely react with other elements and form compounds.
Hope this helps!
The percentage composition of an organic acid is found to be 39.9% C, 6.7% H, and 53.4% O. The molar mass for the compound is 60.0g/mol. What is the molecular formula
Answer:
C₂H₄O₂
Explanation:
To find the molecular formula of the organic acid, you need to (1) determine the mass of each element (from the given percents), then (2) convert grams of each element to moles (via atomic masses), then (3) find the empirical formula, and then (4) find the molecular formula.
(Step 1)
39.9% C -----> 39.9 g C
6.7% H -----> 6.7 g H
53.4% O -----> 53.4 g O
(Step 2)
Atomic Mass (C): 12.011 g/mol
Atomic Mass (H): 1.008 g/mol
Atomic Mass (O): 15.988 g/mol
39.9 grams C 1 mole
---------------------- x ---------------------- = 3.32 moles C
12.011 grams
6.7 grams H 1 mole
-------------------- x --------------------- = 6.65 moles H
1.008 grams
53.4 grams O 1 mole
---------------------- x ---------------------- = 3.34 moles O
15.998 grams
(Step 3)
The empirical formula is made up of the lowest possible amount of each element in the molecule. These amounts can be found by dividing the molar value of each element by the smallest molar value. In this case, the smallest molar value is 3.32 moles C. The calculated values make up the subscripts in the empirical formula.
3.32 moles C / 3.32 = 1 mole C
6.65 moles H / 3.32 = 2 moles H
3.34 moles O / 3.32 = 1 mole O
Empirical Formula: CH₂O
(Step 4)
To find the molecular formula, you first need to determine the molar mass of the empirical formula. Once you have this value, you need to determine how much you need to scale the formula up by. In this case, the molar mass of the empirical formula is half of the molar mass of the molecular formula. Therefore, you need to multiply the amount of each element in the molecule by 2.
Molar Mass (CH₂O): 12.011 g/mol + 2(1.008 g/mol) + 15.998 g/mol
Molar Mass (CH₂O): 30.025 g/mol
30.025 g/mol x 2 = 60.05 g/mol
CH₂O x 2 = C₂H₄O₂
Molecular weight and configurational stability of poly [(fluorophenyl) acetylene]s prepared with metathesis and insertion catalysts
A detailed article on formation of poly [(fluorophenyl) acetylene]s prepared with metathesis and insertion catalysts has been given below.
What is Molecular weight and configurational stability of poly [(fluorophenyl) acetylene]s?By polymerizing (2-fluorophenyl)acetylene, (3-fluorophenyl)acetylene, and (4-fluorophenyl)acetylene with catalysts [Rh(1,5-cyclooctadiene) OCH3]2, high-cis PFPhAs and tungsten(VI) oxychloride/tetraphenyltin, respectively, PFPhAs have been created.Size exclusion chromatography, 1H-NMR, and UV-vis methods were used to investigate the molecular weight and configurational stability of both PFPhAs series under varied circumstances at room temperature.The rate of degradation was independent of the F-position on the Ph ring for all samples while they were in the solid state and exposed to the environment. For high-cis polymers compared to their cis/trans counterparts, the rate of breakdown in the tetrahydrofuran solution increased by up to three orders of magnitude. In an aerated tetrahydrofuran solution, there was considerable cis-to-trans isomerization along with the degradation of high-cis PFPhAs.The F-position on the Ph ring showed the similar dependence on the rate of degradation and isomerization. It was proposed that cis-to-trans isomerization, which increases the amount of unpaired electrons on the main chains, hastened the degradation of high-cis PFPhAs in solution. The ortho-substituted isomers shown increased stability compared to the meta- and para-substituted isomers in both the high-cis and cis/trans series of polymers.To know more about isomerization visit: https://brainly.com/question/2226351
#SPJ4
Show the calculations to determine the volume of the 0.1 M buffer from Part A needed to make 100 mL of a 0.01 M buffer.
The volume of the 0.1 M buffer from Part A needed to make 100 mL of a 0.01 M buffer is 10mL.
How to calculate volume?The volume of a substance can be calculated using the following formula;
C1V1 = C2V2
Where;
C1 = initial concentrationC2 = final concentrationV1 = initial volumeV2 = final volume0.1 × V1 = 100 × 0.01
0.1V1 = 1
V1 = 1/0.1
V1 = 10mL
Therefore, the volume of the 0.1 M buffer from Part A needed to make 100 mL of a 0.01 M buffer is 10mL.
Learn more about volume at: https://brainly.com/question/1578538
#SPJ1
Calculate the number of ions of the following compound :16g of H2CO3
Answer:
1) a) 1.81 × 10²³ molecules (b) 1.93 × 10²³ molecules (c) 0.66× 10²³ molecules
2) a) 0.45× 10²³ions (b) 0.84× 10²³ions (c) 3.6 × 10²³ions
Explanation:
1) Number of molecules:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
a) 16g of H₂CO₃
Number of moles = mass/ molar mass
Number of moles = 16 g/ 62.03 g/mol
Number of moles = 0.3 mol
1 mol = 6.022 × 10²³ molecules
0.3 mol × 6.022 × 10²³ molecules /1 mol
1.81 × 10²³ molecules
b) 20g of HNO₃
Number of moles = mass/ molar mass
Number of moles = 20 g/ 63.01 g/mol
Number of moles = 0.32 mol
1 mol = 6.022 × 10²³ molecules
0.32 mol × 6.022 × 10²³ molecules /1 mol
1.93 × 10²³ molecules
c) 30g of C₆H₁₂O₆
Number of moles = mass/ molar mass
Number of moles = 20 g/ 180.156 g/mol
Number of moles = 0.11 mol
1 mol = 6.022 × 10²³ molecules
0.11 mol × 6.022 × 10²³ molecules /1 mol
0.66× 10²³ molecules
2. Calculate the number of ions in the following compounds:
a) 10g of AlCl₃
Number of moles = mass/ molar mass
Number of moles = 10g/ 133.34 g/mol
Number of moles = 0.075 mol
1 mol = 6.022 × 10²³ ions
0.075 mol × 6.022 × 10²³ ions/1 mol
0.45× 10²³ions
b) 30g of BaCl₂
Number of moles = mass/ molar mass
Number of moles = 30g/ 208.23 g/mol
Number of moles = 0.14 mol
1 mol = 6.022 × 10²³ ions
0.14 mol × 6.022 × 10²³ ions/1 mol
0.84× 10²³ions
c) 58 g of H2SO4
Number of moles = mass/ molar mass
Number of moles = 58g/ 98.079 g/mol
Number of moles = 0.59 mol
1 mol = 6.022 × 10²³ ions
0.59 mol × 6.022 × 10²³ ions/1 mol
3.6 × 10²³ions
Explanation:
attractive forces between molecules in a solid are stronger
than bonds between atoms in a molecule
Answer:
False
Explanation:
Attractive forces between molecules in a solid are weaker than bonds between atoms in a molecule.
It takes much more energy to break intramolecular bonds (bonds within molecules) than it does to break intermolecular bonds (bonds between molecules). As a result, it is more difficult to break apart one molecule of a solid than it is to break the solid or separate the molecules from one another.
Why has nuclear fusion been difficult to develop?
A. Fuel for nuclear fusion is very rare.
B. Fusion normally occurs in the vacuum of space and the atmosphere on Earth stops the
reaction.
C. It is hard to recreate the extremely high temperatures and pressures found inside stars.
D. An efficient shape to contain the reaction has not been found.
Answer:
C. It is hard to recreate the extremely high temperatures and pressures found inside stars.
Explanation:
Nuclear fusion occurs when atomic nuclei are forcefully combined to create a new atomic nuclei or subatomic particles. In nature, this process takes place in our Sun and other stars. Within stars, extremely high temperatures and pressures are achieved and cause nuclear fusion to occur. Humans have not yet been successful in recreating the environment necessary to mimic this process.
If you have 100 ml of a 0.10 m tris buffer (pka 8.3) at ph 8.3 and you add 3.0 ml of 1.0 m hcl, what will be the new ph?
The new pH is 7.69.
According to Hendersen Hasselbach equation;
The Henderson Hasselbalch equation is an approximate equation that shows the relationship between the pH or pOH of a solution and the pKa or pKb and the ratio of the concentrations of the dissociated chemical species. To calculate the pH of the buffer solution made by mixing salt and weak acid/base. It is used to calculate the pKa value. Prepare buffer solution of needed pH.
pH = pKa + log10 ([A–]/[HA])
Here, 100 mL of 0.10 m TRIS buffer pH 8.3
pka = 8.3
0.005 mol of TRIS.
∴ [tex]8.3 = 8.3 + log \frac{[0.005]}{[0.005]}[/tex]
inverse log 0 = [tex]\frac{[B]}{[A]}[/tex]
[tex]\frac{[B]}{[A]} = 1[/tex]
Given; 3.0 ml of 1.0 m hcl.
pka = 8.3
0.003 mol of HCL.
[tex]pH = 8.3 + log \frac{[0.005-0.003]}{[0.005+0.003]}\\pH = 8.3 + log \frac{[0.002]}{[0.008]}\\\\pH = 8.3 + log {0.25}\\\\pH = 8.3 + (-0.62)\\pH = 7.69[/tex]
Therefore, the new pH is 7.69.
Learn more about pH here:
https://brainly.com/question/24595796
#SPJ1
Which equation agrees with the ideal gas law?
StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
V subscript 1 n subscript 1 equals V subscript 2 n subscript 2.
P subscript 1 n subscript 1 equals P subscript 2 n subscript 2.
StartFraction P subscript 1 over P subscript 2 EndFraction equals StartFraction T subscript 2 over T subscript 1.
The equation for ideal gas law is written as PV = nRT.
What is Ideal gas law?Ideal gas law states that, the volume of a given amount of gas is directly proportional to the number on moles of gas, directly proportional to the temperature and inversely proportional to the pressure.
PV = nRT
where;
P is pressure of the gasV is volume of the gasn is number of molesR is ideal gas constantT is temperatureThus, the equation for ideal gas law is written as PV = nRT.
Learn more about ideal gas law here: https://brainly.com/question/12873752
#SPJ1
If initially there are 8.0 kg of cesium-137 present in a sample, how many kg will remain after 60.0 years
Answer:
2 kg
Explanation:
the half life of cesium is approx 30 years
60 years is 2 half lives
8 kg * 1/2 * 1/2 = 2 kg
Carbon-14 can be used to date remains as far back as ____________.
A. 60,000 years
B. the 1940's
C. 710 million years
D. 5700 years
A. Carbon-14 can be used to date remains as far back as 60,000 years.
What is carbon dating?Carbon dating is a method for determining the age of an object containing organic material by using the properties of radioactive isotope of carbon.
Carbon-14 dating can be used to estimate the age of carbon-bearing materials up to about 58,000 to 62,000 years old.
Thus, Carbon-14 can be used to date remains as far back as 60,000 years.
Learn more about carbon dating here: https://brainly.com/question/15673495
#SPJ1
Lead(II) oxide from an ore can be reduced to elemental lead by heating in a furnace with carbon. Calculate the expected yield of lead if 50.0 kg of lead oxide is heated with 50.0 kg of carbon.
Find the expected yield of lead:
The expected yield of lead if 50.0 kg of lead oxide is heated with 50.0 kg of carbon is 46 kg
Calculation:
First and foremost, we must correctly write the equation of reaction in order to answer this issue. This is what it is:
PbO(s) + C(s) → Pb(l) + CO (g)
We continue from here. The limiting reactant should be found, however finding out how many moles of each reactant are present is the only way to do so.
The number of moles is calculated using the formula: the mass of each reactant divided by the molar mass of each reactant.
Mass of PbO is 50kg = 50000g
Molar mass of PBO = 223.20g/mol
The number of moles is thus 50000/223.2 = 224 moles
For carbon, mass is also 50kg = 50000g
Molar mass is 12g/mol
Number of moles of carbon = 50000/12 = 4166.6 moles
We can observe from the number of moles that there are more moles of carbon than PbO. This indicates that the limiting reagent is PbO.
So, in order to determine percentage yield, we employ it.
Since we have a mole ratio of 1 to 1, the number of moles of lead created is equal to the number of moles of lead oxide, which is 224.
The molar mass of lead = 207.20 g/mol
The mass of lead formed = moles of lead x molar mass of lead
The mass of lead formed = 207.20 x 224 = 46,412.8 g = 46 kg
Hence, the expected yield is 46 kg.
Learn more about lead oxide here,
https://brainly.com/question/15191598
#SPJ4
Ammonia, NH3, undergoes reaction with oxygen to form nitrogen and water. When 7.00 x 1022 molecules of ammonia react with 6.00 x 1022 molecules of oxygen, what mass of nitrogen results (grams)
Amount of nitrogen produced = 1.624 g
To calculate the moles, we use the equation:
4NH3(g) + 3 O2 (g) ---> 2 N2 (g) + 6 H2O (g) ....(1)
For ammonia:
Putting values in above equation, we get:
Moles of ammonia = 7.00 x 1022 / 6.023 * 10 ^23 = 0.116 mol
Moles of oxygen = 6.00 x 1022 / 6.023 * 10 ^23 = 0.099 mol
For the reaction:
4NH3(g) + 3 O2 (g) ---> 2 N2 (g) + 6 H2O (g)
By Stoichiometry of the reaction,
4 moles of ammonia combine with 3 moles of Oxygen
Thus 0.116 moles of ammonia will combine with= 3/4 * 0.116 = 0.087 of oxygen
Thus ammonia is the limiting reagent as it limits the formation of product.
4 moles of ammonia produces 2 moles of nitrogen
0.132 moles of ammonia will produce=2/4 * 0.116 = 0.058 of nitrogen
Molar mass of nitrogen = 28 g/mol
Amount of nitrogen produced=
No of moles * molar mass = 0.058 * 282 = 1.624 g
To learn more about molecular mass from the given link
https://brainly.com/question/15428819
#SPJ4
A sample of gas has its number of molecules quadrupled, its Kelvin temperature doubled, and its volume tripled. By what factor has the new pressure changed relative to the original pressure
The new pressure changed relative to the original by a factor of 8/3.
What is the change in the pressure?Using the ideal gas equation;
PV = nRT
P = pressure
V = volume
n = number of moles
R = gas constant
T = temperature
P1 = nRT/V
P2 = 4n * R * 2T/3V
Hence;
P2/P1 = 4n * R * 2T/3V ÷ nRT/V
P2/P1 = 4n * R * 2T/3V * V/nRT
P2/P1 =4 * 2/3
= 8/3
Learn more about ideal gas law:https://brainly.com/question/13821925
#SPJ1
What is the element with the abbreviated electron configuration [kr]5 s 24 d 8?
The element with the abbreviated electron configuration is palladium.
Abbreviated electron configurationsElectron configurations can be abbreviated using the noble gas configuration. The noble gas elements have completely filled orbitals.
The noble gases are:
Helium with an atomic number of 2Neon with an atomic number of 10Argon with an atomic number of 18Krypton with an atomic number of 36And so on.For example, an element with the atomic number 4 can have its electron configuration written as [He] [tex]2S^2[/tex].
An element with the abbreviated atomic number [Kr] [tex]5s^2[/tex] [tex]4d^8[/tex] has a total of the atomic number of Kr + 2 + 8.
36+2+8 = 46 electrons.
The element with the atomic number of 46 is palladium.
More on electron configurations can be found here: https://brainly.com/question/14283892
#SPJ1
What was the first expert system developed to determine the chemical structure of molecules?
Dendral was the first expert system developed to determine the chemical structure of molecules.
A molecule refers to a set of (2) or more atoms that are chemically bonded collectively, which allows you to form the smallest essential unit of a chemical compound. additionally, molecules are capable of taking elements in a chemical reaction.
A molecule is the smallest particle of a substance that has all of the physical and chemical houses. Molecules are made up of one or extra atoms. A molecule is a hard and speedy of or greater atoms held together via the use of a way of appealing forces called chemical bonds.
learn more about molecules here
https://brainly.com/question/26044300
#SPJ1
A
What type of reaction is illustrated?
C₂H4+302 → 2CO₂ + 2H₂O
combustion
decomposition
double
replacement
Answer:
A.) combustion
Explanation:
Combustion reactions are a specific type of redox reaction which always have the same general structure: CₓHᵧ + O₂ ---> H₂O + CO₂ + heat/light
Decomposition reactions are reactions which involve a molecule breaking down into smaller compounds/elements. They have the general structure: AB ---> A + B
Double replacement reactions are reactions in which the cation of one compound is swapped with the cation of another compound. They have the general structure: AB + CD ---> AD + CB