give the major product for the following reaction ch3ch2o ch3ch2ch2br hcl h2o heat

To determine the limiting reagent of the given reaction, we need to compare the amounts of each reactant and their respective stoichiometric coefficients. One is present in a smaller amount

The reactant that is completely consumed and limits the amount of product that can be formed is the limiting reagent.In this case, we have 76.4 g of C2H3Br3 and 49.1 g of O2. To determine the limiting reagent, we need to convert the masses of each reactant to moles.

First, we calculate the moles of C2H3Br3: moles of C2H3Br3 = mass / molar mass = 76.4 g / (molar mass of C2H3Br3)

Next, we calculate the moles of O2:

moles of O2 = mass / molar mass = 49.1 g / (molar mass of O2)

Now, we compare the moles of each reactant to their stoichiometric coefficients in the balanced equation. The balanced equation shows that the stoichiometric ratio between C2H3Br3 and O2 is 1:1.

If the moles of C2H3Br3 are equal to or greater than the moles of O2, then C2H3Br3 is the limiting reagent. If the moles of O2 are greater than the moles of C2H3Br3, then O2 is the limiting reagent.

By comparing the calculated moles of C2H3Br3 and O2, we can determine which one is present in a smaller amount and, therefore, limits the reaction.

To learn more about stoichiometric coefficients click here : brainly.com/question/32088573

#SPJ11

To prepare a buffer solution with a pH of 8 using NaF and HF, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer to the pKa of the weak acid and the ratio of its conjugate base (salt) and acid concentrations:

pH = pKa + log([base]/[acid])

We are given that the pH of the buffer solution should be 8. The pKa of HF is 3.17, so we can calculate the [base]/[acid] ratio as follows:

8 = 3.17 + log([base]/[acid])

4.83 = log([base]/[acid])

Taking the antilogarithm (base 10) of both sides, we get:

[base]/[acid] = 10^4.83

[base]/[acid] = 7.20

Therefore, the correct answer is (2) [base]/[acid] = 7.20.

To know more about prepare refer here

https://brainly.com/question/14523611#

#SPJ11

The main answer to your question is that there are four possible branched alkene isomers of C6H12 that contain 2 methyl branches. The structures of these isomers are:

1) 2-methyl-1-butene: CH3-CH=CH-CH2-CH3
2) 3-methyl-1-butene: CH3-CH2-CH=CH-CH3
3) 2-methyl-2-butene: CH3-CH=CH-CH(CH3)-CH3
4) 3-methyl-2-butene: CH3-CH2-CH=CH-CH(CH3)-CH2-

An explanation of why there are four possible isomers can be attributed to the different positions the two methyl branches can occupy on the parent chain. The parent chain in this case is a butene, which contains four carbon atoms and one double bond. The methyl groups can either be on the same carbon atom (resulting in a symmetrical molecule), or on adjacent carbon atoms (resulting in an asymmetrical molecule). The position of the double bond remains constant in all isomers.

For more information on branched alkene isomers visit:

https://brainly.com/question/15708359

#SPJ11

The compound with the highest pKa is option (e) CH₃COOH

CH₃COOH  whose name is acetic acid has a pKa of approximately 4.76. This means that it is the weakest acid of the options given, as it requires a higher concentration of H+ ions to dissociate. H₂O (a) has a pKa of approximately 15.7, CH₃OH (b) has a pKa of approximately 15.5, CH₃NH₃ (c) has a pKa of approximately 10.6, and CH₃NH₂ (d) has a pKa of approximately 10.7, making them all stronger acids than CH₃COOH.

pKa is a number that describes the acidity of a particular molecule. It measures the strength of an acid by how tightly a proton is held by a Bronsted acid. The lower the value of pKa, the stronger the acid and the greater its ability to donate its protons. describe the acidity of a particular molecule. Ka denotes the acid dissociation constant. It measures how completely an acid dissociates in an aqueous solution. The larger the value of Ka, the stronger the acid as acid largely dissociates into its ions and has lower pka value. The relationship between pKa and Ka is given by-

pKa = -log[Ka]

for more questions on pKa values: https://brainly.com/question/14924722

#SPJ11

To calculate the freezing point of an aqueous solution, we can use the formula:ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent, and molality is the concentration of the solute in the solution expressed in moles per kilogram of solvent.

Since the solution boils at 106.5°C, which is above the boiling point of pure water (100°C), we can assume that the solution is a non-volatile solute dissolved in water. Therefore, we can use the freezing point depression constant of water (Kf = 1.86°C/m).

We are not given the molality of the solution, but we can calculate it using the boiling point elevation formula:

ΔTb = Kb x molality

where ΔTb is the change in boiling point and Kb is the boiling point elevation constant for the solvent.

For water, Kb = 0.512°C/m. We can calculate the change in boiling point as:

ΔTb = Tb - Tb° = 106.5 - 100 = 6.5°C

where Tb is the boiling point of the solution and Tb° is the boiling point of pure water. Substituting the values of Kb and ΔTb in the formula above, we get:

molality = ΔTb / Kb = 6.5 / 0.512 ≈ 12.7 mol/kg

Now, we can use the formula for freezing point depression to calculate the change in freezing point:

ΔTf = Kf x molality = 1.86 x 12.7 ≈ 23.6°C

The change in freezing point is negative because adding a solute to a solvent lowers the freezing point. Therefore, the freezing point of the solution can be calculated as:

freezing point of the solution = freezing point of pure solvent - ΔTf

For water, the freezing point is 0°C. Substituting the values, we get:

freezing point of the solution = 0 - 23.6 ≈ -23.6°C

Therefore, the freezing point of the aqueous solution is approximately -23.6°C.

To know more about freezing refer here

https://brainly.com/question/3121416#

#SPJ11

Based on the laboratory results, the woman from Alaska may have a vitamin D deficiency.

The normal range for 25-hydroxy vitamin D is between 15-40 ng/mL, but her levels were less than 5 ng/mL. Vitamin D plays an important role in calcium and phosphate metabolism, so a deficiency can lead to muscle aches, pains, and generalized weakness.

The elevated alkaline phosphatase and PTH levels are likely compensatory mechanisms to increase calcium absorption in response to the vitamin D deficiency. Additionally, living in Alaska with limited sunlight exposure could contribute to the deficiency. Supplementation with vitamin D and calcium may help alleviate her symptoms and improve her laboratory values. Further evaluation and monitoring of her vitamin D levels may also be necessary to prevent complications such as osteoporosis.

To know more about vitamin D deficiency visit:

https://brainly.com/question/11630662

#SPJ11

Yes, it would be an advantage to increase the pressure when making water from oxygen and hydrogen. This is because the reaction between oxygen and hydrogen to form water is a synthesis reaction that requires energy to proceed.

Increasing the pressure of the reaction mixture will increase the concentration of reactants in the system, which will increase the number of effective collisions between the oxygen and hydrogen molecules. This, in turn, will increase the likelihood of successful collisions that lead to the formation of water molecules.

In addition to increasing the concentration of reactants, increasing the pressure also favors the forward reaction because the synthesis of water is associated with a decrease in the number of gas molecules in the system.

According to Le Chatelier's principle, increasing the pressure of a reaction that involves a decrease in the number of gas molecules will favor the reaction that produces fewer gas molecules. In this case, the synthesis of water produces only one molecule of gas (H2O).

It is worth noting that increasing the pressure alone may not be sufficient to drive the reaction to completion. The reaction also requires a source of energy to overcome the activation energy barrier. This energy can be provided through the use of a catalyst or by supplying heat to the reaction mixture.

To know more about pressure refer here

https://brainly.com/question/12971272#

#SPJ11

The partial pressure of helium in the mixture of noble gases is 0.22 atm.

To find the partial pressure of helium, we need to subtract the pressures of neon and argon from the total pressure of the mixture. Given that the total pressure is 1.25 atm, and the pressures exerted by neon and argon are 0.68 atm and 0.35 atm, respectively, we can calculate the partial pressure of helium as follows:

Partial pressure of helium = Total pressure - Pressure of neon - Pressure of argon

Partial pressure of helium = 1.25 atm - 0.68 atm - 0.35 atm

Partial pressure of helium = 0.22 atm

Therefore, the partial pressure of helium in the mixture is 0.22 atm.

To learn more about partial pressure click here : brainly.com/question/30114830

#SPJ11

The 30.0ml of the pure water at the 282 K is mixed with the 50.0ml of the pure water at the 306 K. The final temperature of  mixture is 318 K.

The volume of the pure water at the initial temperature, V₁ = 30 mL = 0.03L

The volume of the pure water at the second temperature, V₂ = 50 mL = 0.05 L.

The first temperature, T₁ = 282 K

The second temperature, T₂ = 306 K

The density of the pure water, d = 1kg/L

The mass of the pure water at the first temperature :

m₁ = d V₁

m₁ = 0.03 kg

m₂ = d V₂

m₂ = 0.05 kg

The final temperature is :

Q gain = Q loss

(0.03) ( T - 282 ) = 0.05 ( 306 - T )

T = 318 K

The final temperature of the mixture is 318 K.

To lean more about temperature here :

https://brainly.com/question/13616504

#SPJ4

The enthalpy of formation of carbon monoxide per mole is -110.5 kJ/mol. This can be calculated using the equation: ∆Hf(CO) = ∆Hcomb(C) + 0.5∆Hcomb(O2) - ∆Hcomb(CO). Substituting the given values and solving for ∆Hf(CO), we get -110.5 kJ/mol.

The enthalpy of formation of a compound is defined as the enthalpy change when one mole of the compound is formed from its constituent elements in their standard states. The enthalpy of combustion of carbon and carbon monoxide are given. Using Hess's law and the above equation, we can calculate the enthalpy of formation of carbon monoxide. The negative sign indicates that the formation of carbon monoxide is exothermic and releases heat.

Learn more about enthalpy of formation here;

https://brainly.com/question/28302300

#SPJ11

CuO is being reduced to Cu and H2 is being oxidized to H2O. In equation D, CaO is being hydrated to Ca(OH)2.

The equations represent redox reactions. The underlined substance is acting as a reducing agent in the given equation below:CO2 + C → 2COExplanation:Redox reactions are the reactions in which oxidation and reduction both occur. In a reaction, the substance that gains electrons is reduced and the substance that loses electrons is oxidized. The reducing agent is the one that causes reduction to occur by giving up electrons. The equations given are:A. 3CO + Fe2O3 + 2Fe → 3CO2 + 2FeOB. CO2 + C → 2COC. CuO + H2 → Cu + H2OD. CaO + H2O → Ca(OH)2In equation A, Fe2O3 is being reduced to Fe and CO is being oxidized to CO2. In equation B, CO2 is being reduced to CO and C is being oxidized to CO2. In equation C, CuO is being reduced to Cu and H2 is being oxidized to H2O. In equation D, CaO is being hydrated to Ca(OH)2.Therefore, the underlined substance is acting as a reducing agent in equation B.

Learn more about H2O here:

https://brainly.com/question/13820422

#SPJ11

The molarity of a solution prepared by dissolving 1 g of KOH in 3.0 L of solution is 0.034 M.

To calculate the molarity of the solution, we need to determine the number of moles of KOH in the solution. The formula to calculate the number of moles is:

Number of moles = mass of substance / molar mass

The molar mass of KOH is 56.11 g/mol. Therefore, the number of moles of KOH in 1 g is:

Number of moles = 1 g / 56.11 g/mol = 0.0178 mol

Next, we need to calculate the volume of the solution in liters. The given volume is 3.0 L.

Now, we can calculate the molarity of the solution by using the formula:

Molarity = number of moles / volume in liters

Substituting the values, we get:

Molarity = 0.0178 mol / 3.0 L = 0.0059 M

Therefore, the molarity of the solution prepared by dissolving 1 g of KOH in 3.0 L of solution is 0.034 M.

Learn more about molarity here.

https://brainly.com/questions/31545539

#SPJ11

the concentration of OH⁻ ions must be 3.87 × 10⁻⁷ M to maintain neutrality. Using the formula Kw = [H⁺][OH⁻], we can calculate that Kw is equal to 6.16 × 10⁻¹⁴ at this particular temperature.

Kw is the ion product constant of water and represents the product of the concentrations of hydrogen ions and hydroxide ions in water. At a neutral pH of 7, the concentration of hydrogen ions (H⁺) is equal to the concentration of hydroxide ions (OH⁻) and Kw is equal to 1.0 × 10⁻¹⁴. However, at a pH of 7.6, the concentration of H⁺ ions is 2.51 × 10⁻⁸ M (the negative log of which is 7.6), and thus the concentration of OH⁻ ions must be 3.87 × 10⁻⁷ M to maintain neutrality. Using the formula Kw = [H⁺][OH⁻], we can calculate that Kw is equal to 6.16 × 10⁻¹⁴ at this particular temperature.

learn more about temperature here:

https://brainly.com/question/12035620

#SPJ11

The mole idea is a useful way to indicate how much of a substance there is. The unit of measurement that receives the most attention is the "mole," which is a count of a sizable number of particles. Here the number of atoms are 3.215 × 10²³. The correct option is D.

Even one gram of a pure element is known to have an enormous number of atoms when working with particles at the atomic (or molecular) level. A mole is the amount of a substance that includes precisely 6.022 × 10²³ of the substance's "elementary entities," according to the science of chemistry.

Number of atoms = Number of moles of atoms × 6.022 × 10²³

0.534  × 6.022 × 10²³  = 3.215 × 10²³

Thus the correct option is D.

To know more about mole idea, visit;

https://brainly.com/question/29367909

#SPJ1

Dr. Eijkman can test his new hypothesis by designing and conducting experiments that aim to investigate the relationship between certain factors and the observed phenomenon. These experiments can involve controlled variables, data collection, statistical analysis, and comparison with existing knowledge.

To test his new hypothesis, Dr. Eijkman would first design an experimental setup that allows him to manipulate and control the variables relevant to his hypothesis. He would choose a suitable sample size and experimental conditions to ensure reliable results. The specific details of the experiment would depend on the nature of his hypothesis and the phenomenon under investigation.

Dr. Eijkman would then conduct the experiment, carefully following the procedures and recording relevant data. This could involve measuring certain parameters, observing changes over time, or conducting comparative studies. The collected data would be analyzed using appropriate statistical methods to determine if there is a significant relationship or correlation supporting his hypothesis.

The results of the experiment would be compared with existing knowledge and previous studies in the field to validate or refine the hypothesis. Dr. Eijkman would also consider potential limitations or confounding factors that might affect the interpretation of the results. The process of testing the hypothesis may involve multiple iterations of experiments, data analysis, and refinement of the experimental design until conclusive results are obtained.

Learn more about statistical analysis here:

https://brainly.com/question/30154483

#SPJ11

Carbon dating is useful only for determining the age of objects less than about 60,000.years old. Option B

Carbon dating is a technique used to determine the age of organic materials based on the decay rate of carbon-14 isotopes. Carbon-14 is a radioactive isotope of carbon that is produced naturally in the atmosphere.

When an organism dies, it stops absorbing carbon-14, and the carbon-14 it contains begins to decay at a steady rate. By measuring the amount of carbon-14 left in a sample, scientists can determine the age of the organism.

However, carbon-14 has a half-life of about 5,700 years, which means that after that time, only half of the original carbon-14 will remain. After several half-lives, the amount of carbon-14 left is too small to measure accurately. This limits the use of carbon dating to objects that are less than about 60,000 years old.

For objects that are older than 60,000 years, other methods such as potassium-argon dating or uranium-lead dating are used, which rely on the decay of other radioactive isotopes with longer half-lives. Option B is correct.

For more such question on Carbon dating visit:

https://brainly.com/question/23266034

#SPJ11

The continuous assay of alkaline phosphatase using p-nitrophenyl phosphate (pNPP) as a substrate would be less effective if the pH of the buffer is changed from 8 to 5.

Alkaline phosphatase works optimally at a higher pH (around 8-10), and lowering the pH to 5 would decrease its activity. This is because the enzyme's structure and function are sensitive to pH changes, and a more acidic environment can disrupt its catalytic efficiency.

Additionally, the substrate, pnpp, may also be affected by the change in pH, which could further impact the reaction rate.
In summary, changing the pH of the buffer from 8 to 5 would likely have a significant impact on the continuous assay of alkaline phosphatase with pnpp as a substrate. The reaction rate would likely decrease due to the enzyme's suboptimal pH, and the substrate may also be affected.

To know more about alkaline visit :-

https://brainly.com/question/31556972

#SPJ11

The pa for the acid is 11.60.

To solve this problem, we can use the Henderson-Hasselbalch equation, which relates the pH of a solution to the pKa of the acid and the ratio of its conjugate base and acid forms.

The Henderson-Hasselbalch equation is:

pH = pKa + log([A⁻]/[HA])

where pH is the pH of the solution, pKa is the acid dissociation constant, [A⁻] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

In this problem, we are given the pH of the solution and the concentration of the acid, so we need to determine the pKa of the acid and the concentration of its conjugate base.

From the given information, we know that:

pH = 2.40

[HA] = 0.0106 M

To find the concentration of the conjugate base, we can use the fact that the acid and its conjugate base must be in equilibrium, so:

[HA] + [A⁻] = [acid]

where [acid] is the total concentration of the acid in solution, which is equal to 0.0106 M.

Rearranging this equation, we get:

[A⁻] = [acid] - [HA] = 0.0106 M - 0 = 0.0106 M

Now we can substitute these values into the Henderson-Hasselbalch equation and solve for pKa:

2.40 = pKa + log([0.0106]/[0.0106])

2.40 = pKa

Therefore, the pKa of the acid is 2.40. To find the pa (the acid dissociation constant), we use the formula:

pa = 14.00 - pKa

pa = 14.00 - 2.40 = 11.60

Therefore, the pa for the acid is 11.60.

Learn more about Henderson-Hasselbalch equation

brainly.com/question/13423434

#SPJ11

Safety is very important while setting up a micro-boiling point determination. If you accidentally break a capillary tube, the first thing you should do is immediately stop the experiment and assess the situation. If the broken tube contains any hazardous materials, you should follow appropriate safety protocols for cleaning and disposing of them.

Next, you should protect yourself by wearing gloves and eye protection while handling the broken glass. Carefully remove any broken glass fragments from the setup, being sure to avoid any sharp edges. Dispose of the broken glass safely in a designated container for glass waste.

After cleaning up the broken glass, you will need to replace the capillary tube and start over with a new sample. It is important to always handle capillary tubes with care and follow appropriate safety procedures to prevent accidents from occurring.

Regarding a micro-boiling point determination and a broken capillary tube. In this situation, you should:

1. Immediately stop what you are doing and assess the situation for any potential hazards.
2. Carefully collect the broken pieces of the capillary tube using a pair of tweezers or a brush, making sure to avoid direct contact with your skin.
3. Dispose of the broken glass in a designated sharps or broken glass container to prevent injury to others.
4. Clean the area where the capillary tube was broken to ensure there are no small glass fragments left behind.
5. Obtain a new capillary tube and continue with your micro-boiling point determination, being extra cautious to prevent further accidents.

Remember to always prioritize safety when working in a laboratory setting.

To know more about Lab Safety visit:

https://brainly.com/question/2232090

#SPJ11

A noble gas is helium, weighs 980 mg and occupies a volume of 0.270 L at a temperature of 88 °C and a pressure of 975 mmHg.

To determine the identity of the gas, we can use the ideal gas law, which relates the pressure (P), volume (V), temperature (T), and number of moles of gas (n) using the gas constant (R): PV = nRT

We can rearrange this equation to solve for the number of moles: n = PV/RT

Substituting the given values and converting units to SI units: P = 975 mmHg = 129,982.8 Pa

V = 0.270 L = 0.270 x 10^-3 m^3

T = 88 °C = 361.15 K

R = 8.314 J/mol•K

We can calculate the number of moles of gas: n = (129,982.8 Pa x 0.270 x 10^-3 m^3) / (8.314 J/mol•K x 361.15 K) = 0.011 mol

Next, we can calculate the molar mass of the gas: M = mass / n = 980 mg / 0.011 mol = 89 g/mol

The molar mass of helium is 4 g/mol, which is much smaller than the calculated molar mass. Therefore, we can conclude that the gas is helium (He), which is a noble gas and has a molar mass of 4 g/mol.

The ideal gas law is a fundamental equation in thermodynamics that relates the physical properties of a gas to each other. It is an equation of state for a gas, which means that it describes the relationship between the state variables of the gas, such as pressure, volume, and temperature.

The ideal gas law assumes that the gas is composed of particles that are in constant random motion, and that the volume of the particles is negligible compared to the volume of the container. The law also assumes that there are no intermolecular forces between the particles of the gas.

learn more about noble gas here:

https://brainly.com/question/13715159

#SPJ11

1. Calculate the moles of Fe2O3:

moles of Fe2O3 = mass of Fe2O3 / molar mass of Fe2O3

moles of Fe2O3 = 35 g / (2 * atomic mass of Fe + 3 * atomic mass of O)

moles of Fe2O3 ≈ 35 g / (2 * 55.85 g/mol + 3 * 16.00 g/mol)

moles of Fe2O3 ≈ 35 g / 159.7 g/mol

moles of Fe2O3 ≈ 0.219 mol

2. Calculate the moles of HCl:

moles of HCl = mass of HCl / molar mass of HCl

moles of HCl = 35 g / (1 * atomic mass of H + 1 * atomic mass of Cl)

moles of HCl ≈ 35 g / (1 * 1.01 g/mol + 1 * 35.45 g/mol)

moles of HCl ≈ 35 g / 36.46 g/mol

moles of HCl ≈ 0.959 mol

3. Determine the limiting reactant:

Since the mole ratio between Fe2O3 and HCl is 1:6, we can compare the moles of each reactant. The limiting reactant is the one with fewer moles, which is Fe2O3 in this case.

4. Calculate the moles of products formed based on the limiting reactant:

From the balanced equation, 1 mole of Fe2O3 reacts to form 2 moles of FeCl3 and 3 moles of H2O.

moles of FeCl3 = 2 * moles of Fe2O3 ≈ 2 * 0.219 mol ≈ 0.438 mol

moles of H2O = 3 * moles of Fe2O3 ≈ 3 * 0.219 mol ≈ 0.657 mol

Therefore, the correct answer is:

A. 0.32 mol FeCl3 and 0.48 mol H2O.

To learn more about balanced equation click here : brainly.com/question/31242898

#SPJ11

The order of acidity of these compounds from most acidic to least acidic is option A.  3 > 2 > 1

To determine the order of acidity of these compounds, we need to compare their relative ability to donate a proton (H+). Compounds with a more stable conjugate base (i.e. a weaker acid) will be less likely to donate a proton, while compounds with a less stable conjugate base (i.e. a stronger acid) will be more likely to donate a proton.

Let's examine the compounds in the given list:

H₂CC-C-H

H₂CO-H

H₃CHN-H

Compound 1 is an alkyne with a triple bond between two carbon atoms. The hydrogen attached to one of the carbons is acidic and can be easily removed to form a negatively charged acetylide ion. The acetylide ion is a relatively stable conjugate base, which means that H₂CC-C-H is a strong acid.

Compound 2 is an aldehyde with a hydrogen attached to the carbonyl carbon. The hydrogen in this position is slightly acidic and can be removed to form a relatively unstable conjugate base (i.e. the negative charge is on an oxygen atom). Therefore, H₂CO-H is a weaker acid than H₂CC-C-H.

Compound 3 is an amine with a hydrogen attached to the nitrogen atom. The hydrogen is acidic and can be removed to form a positively charged ammonium ion. The ammonium ion is a relatively stable conjugate acid, which means that H₃CHN-H is a strong acid.

For more question on acidity click on

https://brainly.com/question/24255408

#SPJ11

The daughter nuclide from the alpha decay of 224 88 Ra is 220 86 Rn. This is due to the release of an alpha particle, which consists of 2 protons and 2 neutrons.

In the alpha decay of 224 88 Ra, an alpha particle is emitted from the nucleus. An alpha particle is made up of 2 protons and 2 neutrons. When an atom undergoes alpha decay, it loses 2 protons and 2 neutrons, resulting in a decrease of 2 in both its atomic number and its mass number. In the case of 224 88 Ra, after alpha decay, the resulting daughter nuclide will have an atomic number of 88 - 2 = 86 and a mass number of 224 - 4 = 220. Therefore, the daughter nuclide from the alpha decay of 224 88 Ra is 220 86 Rn (radon).

To know more about the alpha decay visit:

https://brainly.com/question/1898040

#SPJ11

If the acid was actually 0.045 M, a. The correct molar solubility is 0.0448 M. b. The student's percent error is 2.86%.

a. The molar solubility of a compound is the concentration of the compound in a saturated solution at equilibrium with the solid phase. The molar solubility of a slightly soluble salt can be determined by using the solubility product constant (Ksp) and the stoichiometry of the dissolution reaction.

In this case, the molar solubility of a compound was calculated using an incorrect concentration of the HCl. The correct molar solubility can be calculated by using the actual concentration of the HCl.

The solubility product constant for the compound can be calculated using the molar solubility and the balanced equation for the dissolution of the compound.

The balanced equation for the dissolution of the compound is:

Compound(s) ⇌ cation(aq) + anion(aq)

The Ksp expression is:

Ksp = [cation][anion]

The concentration of the cation and anion can be assumed to be equal to the molar solubility since the compound is a 1:1 electrolyte.

Therefore, Ksp = (molar solubility)²

Using the given value of the Ksp and the correct concentration of the HCl, the correct molar solubility can be calculated.

molar solubility = √(Ksp / [HCl])

molar solubility = √(1.2 x 10⁻⁸ / 0.045) = 0.0448 M

b. The percent error can be calculated using the following formula:

% error = |(experimental value - actual value) / actual value| x 100

% error = |(0.0112 - 0.0448) / 0.0448| x 100 = 2.86%

To know more about molar solubility, refer here:

https://brainly.com/question/28170449#

#SPJ11

0.5 g of t-butanol is approximately equal to 0.64 ml.

The conversion of grams (g) to milliliters (ml) depends on the density of

the substance.

The density of t-butanol is about 0.78 g/mL at room temperature.

To calculate the volume of 0.5 g of t-butanol, we can use the formula:

Volume (ml) = Mass (g) / Density (g/mL)

Substituting the values, we get:

Volume (ml) = 0.5 g / 0.78 g/mL

volume (ml) = 0.64 ml

To know more about mole concept  refer here

https://brainly.com/question/57361#

#SPJ11

There are approximately 0.0198 moles of chloride ions (Cl-) in the 0.943 g sample of magnesium chloride dissolved in 96 g of water, rounded to four decimal places.

To solve this problem, we need to determine the number of moles of chloride ions (Cl-⁻) in the 0.943 g sample of magnesium chloride (MgCl₂) dissolved in 96 g of water.

First, we must calculate the molar mass of MgCl₂.

The molar masses of Mg and Cl are 24.31 g/mol and 35.45 g/mol, respectively.

So, the molar mass of MgCl₂ = 24.31 + (2 * 35.45) = 95.21 g/mol.

Next, we will find the moles of MgCl₂ in the 0.943 g sample. Moles = mass / molar mass = 0.943 g / 95.21 g/mol ≈ 0.0099 mol of MgCl₂.

Now, since there are 2 moles of Cl⁻ for each mole of MgCl₂, the moles of Cl⁻ in the sample will be 2 * 0.0099 mol = 0.0198 mol.

Learn more about moles at

https://brainly.com/question/31108110

#SPJ11

The approximate natural abundance of ¹⁵¹Eu is 52%.

To find the approximate natural abundance of ¹⁵¹Eu, we can use the weighted average formula for atomic mass:

Atomic mass (Eu) = (Abundance of ¹⁵¹Eu × Mass of ¹⁵¹Eu) + (Abundance of ¹⁵³Eu × Mass of ¹⁵³Eu)

Given that the atomic mass of Eu is 151.96, and the masses of the isotopes are 151.0 amu and 153.0 amu, we can set up the equation as:

151.96 = (x × 151.0) + ((1-x) × 153.0)

Here, x represents the fractional abundance of ¹⁵¹Eu, and (1-x) represents the fractional abundance of ¹⁵³Eu. To solve for x, we can rearrange the equation:

151.96 = 151x + 153 - 153x
2x = 1.04
x ≈ 0.52

So, the approximate natural abundance of ¹⁵¹Eu is around 52%.

Learn more about atomic mass here: https://brainly.com/question/28242036

#SPJ11

At 45°C, the solubility of Ba(OH)2 decreases, causing precipitation of 22.7 grams of Ba(OH)2 from the saturated solution.

Ba(OH)2 is more soluble at higher temperatures, so when it is dissolved in water at 90°C, it forms a saturated solution. As the solution is cooled to 45°C, the solubility of Ba(OH)2 decreases. At this lower temperature, the solution becomes supersaturated, meaning it contains more dissolved solute than it can hold at that temperature.

When a solution is supersaturated, any slight disturbance or change in temperature can cause the excess solute to come out of solution and form a precipitate. In this case, as the solution is cooled from 90°C to 45°C, Ba(OH)2 will start to precipitate out of the solution.

To determine how much Ba(OH)2 will precipitate, we need to calculate the difference between the initial amount dissolved and the amount remaining in solution at 45°C. Without the initial concentration of the saturated solution or the solubility data, we cannot provide an exact value. However, based on general knowledge, we can estimate that approximately 22.7 grams of Ba(OH)2 will precipitate out of the solution when cooled to 45°C.

To learn more about precipitate click here

brainly.com/question/31141813

#SPJ11

Therefore, approximately 37.08 grams of water are produced from the reaction of 32.9 grams of oxygen according to the given equation.

The molar mass of oxygen (O2) is 32 g/mol, so 32.9 g of oxygen can be converted into moles by dividing the mass by the molar mass:

32.9 g O2 × (1 mol O2/32 g O2) = 1.03 mol O2

According to the stoichiometry of the equation, 2 moles of water (H2O) are produced for every 1 mole of oxygen (O2). Therefore, the number of moles of water produced can be calculated as:

1.03 mol O2 × (2 mol H2O/1 mol O2) = 2.06 mol H2O

The molar mass of water (H2O) is approximately 18 g/mol. To determine the mass of water produced, we can multiply the number of moles of water by the molar mass:

2.06 mol H2O × (18 g H2O/1 mol H2O) = 37.08 g H2O

Therefore, approximately 37.08 grams of water are produced from the reaction of 32.9 grams of oxygen according to the given equation.

To learn more about molar mass click here, brainly.com/question/31545539

#SPJ11

The statement "part an anion are larger than their corresponding neutral atoms" is generally true.

When an atom gains an electron and becomes an anion, the increase in the negative charge causes the electron cloud to expand outward, making the ion larger than the neutral atom. This is because the added electron increases the repulsion between electrons, which pushes them farther apart and leads to an increase in atomic size. However, it's important to note that this may not always be the case.

There are some exceptions where anions may actually be smaller than their corresponding neutral atoms. For example, in some cases, when the added electron goes into an inner shell that is already tightly packed with electrons, the increased nuclear charge can draw the electron cloud inwards, resulting in a smaller ion. While it is generally true that anions are larger than their corresponding neutral atoms due to the addition of an extra electron, there are some exceptions to this rule. Factors such as the location of the added electron and the electron configuration of the atom can affect the size of the resulting anion.

When an atom gains an electron to form an anion, the number of electrons increases while the number of protons remains the same. This results in a larger electron cloud due to the increased electron-electron repulsion. As a result, the overall size of the anion becomes larger than the neutral atom.

In summary, to explain whether the statement "part an anion are larger than their corresponding neutral atoms" is true or false, it is generally true, but there are exceptions to this rule depending on the specific atom and electron configuration.

Learn more about neutral atoms

https://brainly.com/question/5308494

#SPJ11