Given the following data for the reaction A ?B, determine the activation energy, Ea of the reaction.
k(M/s) T (K) 2.04 x 10-4 250 6.78 x 10-3 400
ANSWER KEY:
a. 6512 J/mol
b. -6512 J/mol
c. 3256 J/mol
d. -3256 J/mo
l e. 6.25 J/mol

The largest wavelength found in the scattered x rays is 0.3145 nm.

The wavelength of 0.3145 nm is observed at a scattering angle of 20.1°.

Part A,
The largest wavelength found in the scattered x rays can be calculated using the Compton scattering formula:

λ' - λ = (h/mc)(1 - cosθ)

where λ is the initial wavelength, λ' is the scattered wavelength, h is Planck's constant, m is the mass of the electron, c is the speed of light, and θ is the scattering angle.

We can rearrange this formula to solve for λ', which gives:

λ' = λ + (h/mc)(1 - cosθ)

Plugging in the values given, we get:

λ' = 6.65×10−2 nm + (6.626×10^-34 J·s / (9.109×10^-31 kg) × 3×10^8 m/s)(1 - cos(180°))

λ' = 6.65×10−2 nm + 0.248 nm

λ' = 0.3145 nm

Therefore,

Part B:
To find the scattering angle at which this wavelength is observed, we can rearrange the Compton scattering formula again to solve for θ, which gives:

cosθ = 1 - (λ - λ')mc/h

Plugging in the values we found in Part A, we get:

cosθ = 1 - (6.65×10−2 nm - 0.3145 nm) × 9.109×10^-31 kg × 3×10^8 m/s / (6.626×10^-34 J·s)

cosθ = 0.939

θ = 20.1°
To know more about the wavelength, click here;

https://brainly.com/question/31143857

#SPJ11

Certain types of sunglasses are very effective at dimesining light reflecting from surfaces because of d. polorization.

Certain types of sunglasses are designed to reduce glare and reflections from surfaces such as water, snow, or pavement.

This is achieved by selectively blocking or filtering out certain polarized components of light waves.

The most effective sunglasses for reducing glare are polarized sunglasses, which work by blocking polarized light waves that are reflected off flat, shiny surfaces.

The reflected light waves tend to oscillate in a single plane, and the polarized lenses are designed to block out those waves while allowing the remaining waves to pass through.

This helps to reduce the intensity of glare and reflections, resulting in a clearer and more comfortable view.

In summary, the answer to the question is d. polarization.

Learn more about reflections at: https://brainly.com/question/4289712

#SPJ11

The image formed by a concave mirror of focal length 10 cm when an object of height 6 cm is placed 30 cm away is located at a distance of 15 cm from the mirror, has a height of 2 cm, is real, and inverted.

Using the mirror formula, 1/f = 1/v + 1/u, where f is the focal length, v is the distance of the image from the mirror, and u is the distance of the object from the mirror, we can calculate the position of the image as follows:

1/10 = 1/v + 1/30

v = 15 cm

Using the magnification formula, m = -v/u, we can calculate the size of the image as follows:

m = -v/u = -15/30 = -0.5

i = o = -0.56 = -3 cm (negative sign indicates an inverted image)

However, we need to take the absolute value of the image height to obtain a positive value for the height:

i = |-3| = 3 cm

Therefore, the image has a height of 3 cm.

Since the image is located in front of the mirror, it is real. The image is also inverted since the magnification is negative. Finally, the image is located to the left of the mirror, indicating that it is a real image.

Learn more about Mirror formula:

https://brainly.com/question/8512677

#SPJ11

The ball's initial speed was approximately 7.17 m/s.

To find the initial speed of the ball, we will use the equations of motion. Since the ball is thrown horizontally, we can consider the vertical and horizontal motions separately.

For the vertical motion, we can use the equation:

y = 1/2 * g * t^2
where y is the vertical distance, g is the acceleration due to gravity (9.81 m/s^2), and t is the time it takes for the ball to fall.

9.4 m = 1/2 * 9.81 m/s^2 * t^2
Solving for t, we get t ≈ 1.38 seconds.

For the horizontal motion, we can use the equation:

x = v_initial * t
where x is the horizontal distance (9.9 m) and v_initial is the initial speed of the ball.

9.9 m = v_initial * 1.38 s
Solving for v_initial, we get:

v_initial ≈ 7.17 m/s

Therefore, the ball's initial speed was approximately 7.17 m/s.

To learn more about distance, refer below:

https://brainly.com/question/15172156

#SPJ11

A wire is connected to a 6V battery. At 20°C, the current is 2A whereas at 100°C the current is 1.7 . The temperature coefficient of resistivity (α) of the material of the wire is a. 1.1 x 10-3 °C

To find the temperature coefficient of resistivity (α) of the material of the wire, we'll use the formula:

α = (R₂ - R₁) / [R₁(T₂ - T₁)]

where R₁ and R₂ are the resistances at temperatures T₁ and T₂, respectively.

First, let's calculate the resistances at 20°C (T₁) and 100°C (T₂) using Ohm's Law (V = IR):

R₁ = V / I₁ = 6V / 2A = 3Ω (at 20°C)
R₂ = V / I₂ = 6V / 1.7A ≈ 3.53Ω (at 100°C)

Now, we can find α using the formula:

α = (3.53Ω - 3Ω) / [3Ω(100°C - 20°C)]
α ≈ 0.53Ω / (3Ω * 80°C)
α ≈ 0.000221 °C⁻¹

The closest answer choice to the calculated α is (a) 1.1 x 10⁻³ °C, though there's a slight difference between the calculated value and the provided options. Nonetheless, based on the given choices, option (a) would be considered the most accurate answer for the temperature coefficient of resistivity (α) of the material of the wire. Therefore the correct option A

Know more about coefficient of resistivity here:

https://brainly.com/question/16949732

#SPJ11

the domain of the function represented by these ordered pairs is {–2, 0, 3, –1, 5}.

The domain of a function refers to the set of all possible input values for which the function is defined. In this case, we are given a set of ordered pairs representing the function. The x-values of these ordered pairs constitute the domain of the function. From the given ordered pairs {(–2, 1), (0, 0), (3, –1), (–1, 7), (5, 7)}, we can extract the x-values:

Domain = {–2, 0, 3, –1, 5}

Therefore, the domain of the function represented by these ordered pairs is {–2, 0, 3, –1, 5}.

This means that the function is defined for these specific x-values, and any input outside of this set would not be a valid input for the given function.

It is important to note that the domain is determined by the available data and does not necessarily represent the entire set of real numbers. In this case, the x-values provided in the ordered pairs define the valid inputs for the function.

Learn more about domain of a function here:

https://brainly.com/question/28599653

#SPJ11

Scientists believe that Titan, one of Saturn's moons, has an atmosphere, while the large moons of Jupiter (Ganymede, Callisto, Europa, and Io) do not have significant atmospheres. The main reason for this difference lies in their respective environments and the processes occurring on these moons.

Titan has a thick atmosphere primarily composed of nitrogen, with smaller amounts of methane and other hydrocarbons. This atmosphere likely exists due to the presence of organic compounds on the moon's surface, as well as ongoing geological and atmospheric processes. Titan's atmosphere is maintained through a combination of surface evaporation, volcanic activity, and photochemical reactions.

In contrast, the large moons of Jupiter have relatively tenuous or no significant atmospheres. This is because their environments differ from that of Titan. Ganymede, Callisto, and Europa are icy moons with subsurface oceans, while Io is volcanically active. These moons lack the conditions necessary for the sustained presence of a thick atmosphere. The extreme temperatures, low atmospheric pressures, and different compositions and geological activities on these moons contribute to their lack of significant atmospheres.

Overall, the presence or absence of an atmosphere on a moon depends on multiple factors, including composition, geological activity, presence of volatile substances, and environmental conditions specific to each moon.

To know more about  large moons of jupiter click this link-

https://brainly.com/question/31760903

#SPJ11

The coffee's temperature at t = 10 minutes initially it temperature 94°C and it is put into a 20°C room when t = 0  temperature changing at a rate of r(t) = -7.8(0.9%) °C per minute, is 79.51°C  approximately.

The given rate function r(t) = -7.8(0.9%) °C per minute.

      we need to find the total temperature change over 10 minutes. We can do this by integrating the rate function

      over the time interval [0, 10]

      ∆T = ∫(from 0 to 10) -7.8(0.9^t) dt

      Now, integrate the function:

     ∆T = [-7.8 × (1/ln(0.9)) × (0.9¹⁰)](from 0 to 10)

Plug in the limits:

    ∆T = [-7.8 × (1/ln(0.9)) × (0.9¹⁰)] - [-7.8 × (1/ln(0.9)) × (0.9⁰)]

   Calculate the values:

   ∆T ≈ -14.49

Now, subtract the temperature change from the initial coffee temperature:

   T(10) = 94°C - 14.49 ≈ 79.51°C

   So, the coffee's estimated temperature at t = 10 minutes is approximately 79.51°C.

To learn more about  temperature visit: https://brainly.com/question/25677592

#SPJ11

Neon gas consists of a larger number of moles.

a) To determine which gas has a larger number of moles, we need to calculate the number of moles for each gas. The number of moles can be calculated using the formula: number of moles = mass of substance / molar mass. The molar mass of neon is 20.18 g/mol and the molar mass of nitrogen is 28.02 g/mol. Thus, the number of moles of neon is 10 g / 20.18 g/mol = 0.495 moles, and the number of moles of nitrogen is 10 g / 28.02 g/mol = 0.356 moles. Therefore, neon gas consists of a larger number of moles.
b) To determine which gas has a larger number of molecules, we need to consider the fact that neon is a monotonic gas and nitrogen is a diatomic gas. A molecule of neon consists of only one atom, while a molecule of nitrogen consists of two atoms. Thus, for the same mass, neon will have a larger number of molecules than nitrogen. Therefore, neon gas has a larger number of molecules.
c) To determine which gas has a larger number of atoms, we need to calculate the total number of atoms for each gas. As mentioned earlier, neon consists of only one atom per molecule, while nitrogen consists of two atoms per molecule. Therefore, the number of atoms in 10 g of neon gas is 0.495 moles x 6.02 x 10^23 atoms/mol = 2.98 x 10^23 atoms. On the other hand, the number of atoms in 10 g of nitrogen gas is 0.356 moles x 6.02 x 10^23 atoms/mol x 2 atoms/molecule = 4.29 x 10^23 atoms. Thus, nitrogen gas has a larger number of atoms.

To know more about monotonic gas visit: https://brainly.com/question/11405437

#SPJ11

The inverted pendulum model is the most basic mechanical system that can replicate the motion of the centre of gravity during gait.

In this model, the hip joint serves as the pivot point for the leg's inverted pendulum. The inverted pendulum's swinging motion can be used to model how the centre of mass moves during gait. The centre of mass moves in an arc as the leg swings back and forth, imitating the natural stride. This mechanical device, which has been sped up, depicts the basic dynamics of walking and offers insights into the coordination and control of human mobility.

To know more about inverted pendulum, here

brainly.com/question/29702798

#SPJ4

FALSE. The working fluid in a thermodynamic cycle does undergo changes in its properties after going through the entire cycle.

The working fluid is the substance that carries out energy transfer in a thermodynamic cycle. It experiences various thermodynamic processes and undergoes changes in its properties, such as temperature, pressure, and volume, during the cycle. The purpose of the thermodynamic cycle is to convert heat energy into work, which is achieved through these changes in the working fluid's properties.

In a complete thermodynamic cycle, the working fluid returns to its initial state after going through a series of processes. This means that, while it may have undergone changes during the cycle, the overall change in properties from beginning to end is zero. It is important to note that the fluid must undergo changes in properties to perform work and transfer energy effectively; otherwise, no work would be done, and the cycle would be ineffective.

Examples of thermodynamic cycles include the Carnot cycle, Rankine cycle, and Brayton cycle, each involving different processes and working fluids, such as water, air, or refrigerants. In each of these cycles, the working fluid undergoes changes in its properties to perform work and achieve energy conversion.

To know more about thermodynamic cycle, click here;

https://brainly.com/question/31413995

#SPJ11

Sound travels fastest in D. ice.

The speed of sound depends on the medium through which it travels. In general, sound travels faster in denser and more rigid materials. Among the options given, ice is the densest and most rigid medium, so sound will travel fastest through it.

In steam (A) and water vapor (B), sound travels slower compared to ice because the molecules are more spread out and have less interaction with each other, leading to a lower speed of sound.

In water (C), sound travels slower than in ice but faster than in steam or water vapor. Water is less dense and less rigid than ice, causing the speed of sound to be slower compared to ice but faster compared to the gaseous forms.

In summary, while sound can travel through all of the given options, it travels fastest in ice (D) due to its higher density and rigidity compared to steam, water vapor, and water.

To know more about Sound, please click on:

https://brainly.com/question/29707602

#SPJ11

The statement "iceland is a good example of an island arc, formed from an oceanic-oceanic plate collision." is True because Iceland is located on the Mid-Atlantic Ridge and is formed by the interaction of the North American and Eurasian tectonic plates, which are both oceanic plates.

As the plates move apart, magma rises up to fill the gap, leading to the formation of new crust. The volcanic activity and geothermal energy in Iceland are evidence of this ongoing process of plate tectonics.

Iceland is a volcanic island located on the Mid-Atlantic Ridge, which is an underwater mountain range that runs through the Atlantic Ocean. The ridge marks the boundary between the North American plate and the Eurasian plate, which are both oceanic plates.

At the boundary between these two plates, the plates are moving apart due to the process of seafloor spreading. As the plates move apart, magma rises up from the mantle beneath the Earth's crust to fill the gap. The magma cools and solidifies, forming new crust.

In the case of Iceland, the magma rises up through fissures in the Earth's crust, creating volcanic activity. Over time, the accumulation of cooled magma and volcanic rocks forms a volcanic island.

For more question on iceland click on

https://brainly.com/question/8161163

#SPJ11

True. Iceland is a great example of an island arc that was formed as a result of an oceanic-oceanic plate collision.

This geological process involves two tectonic plates made up of oceanic crust that converge and collide, leading to the formation of a subduction zone. As one of the plates moves beneath the other, it starts to melt and create magma, which eventually rises to the surface to form volcanic islands. Iceland is situated along the Mid-Atlantic Ridge, which is a divergent boundary where the Eurasian and North American plates are separating.

However, it is also located on a hotspot, which contributes to the formation of volcanic activity on the island. The collision of the North American and Eurasian plates causes volcanic activity in Iceland, making it an ideal location for studying the effects of plate tectonics and volcanism.

Learn more about collision here:

https://brainly.com/question/13569781

#SPJ11

Hebb's rule is based on the associative laws of frequency and contiguity.

Hebb's rule is the based on the frequency and contiguity associative principles. This means that the stronger the link between two neurons gets the more frequently they are triggered together and the closer in time their activations occur.

This is because, according to Hebb's rule, "cells that fire together wire together," which means that synapses connecting neurons that are the active at the same moment become stronger over time.

This process is the assumed to be at the root of many types of learning and memory in the brain.

For such more question on frequency:

https://brainly.com/question/254161

#SPJ11

The accumulated charge in the capacitor is approximately 1.475 × 10⁻¹¹ Coulombs.

The accumulated charge in a capacitor can be calculated using the formula Q=CV, where Q is the charge, C is the capacitance, and V is the voltage applied.

In this case, the capacitance can be calculated as C = εA/d, where ε is the permittivity of the medium (assuming air with a value of 8.85 x 10^-12 F/m), A is the plate area (200 mm = 0.2 m), and d is the plate separation (6 mm = 0.006 m).

So, C = (8.85 x 10^-12 F/m)(0.2 m)/(0.006 m) = 2.95 x 10^-9 F

Now, using the formula Q=CV and the voltage applied of 0.5V, we get:

Q = (2.95 x 10^-9 F)(0.5V) = 1.48 x 10^-9 C

Therefore, the accumulated charge in the capacitor is 1.48 x 10^-9 coulombs.
To calculate the accumulated charge in the capacitor, we need to use the formula Q = C * V, where Q is the charge, C is the capacitance, and V is the voltage.

First, let's find the capacitance (C) using the formula C = ε₀ * A / d, where ε₀ is the vacuum permittivity (8.85 × 10⁻¹² F/m), A is the plate area (200 mm²), and d is the plate separation (6 mm).

1. Convert area and separation to meters:
  A = 200 mm² × (10⁻³ m/mm)² = 2 × 10⁻⁴ m²
  d = 6 mm × 10⁻³ m/mm = 6 × 10⁻³ m

2. Calculate the capacitance (C):
  C = (8.85 × 10⁻¹² F/m) * (2 × 10⁻⁴ m²) / (6 × 10⁻³ m) ≈ 2.95 × 10⁻¹¹ F

3. Calculate the accumulated charge (Q) using Q = C * V:
  Q = (2.95 × 10⁻¹¹ F) * (0.5 V) ≈ 1.475 × 10⁻¹¹ C

To know more about capacitor visit:-

https://brainly.com/question/17176550

#SPJ11

The resolving power (R) of a grating can have units of dimensionless quantity.

Resolving power is a measure of the ability of an optical instrument to distinguish between two closely spaced wavelengths or spectral lines. It is defined as R = λ/Δλ, where λ is the wavelength of the light being observed, and Δλ is the smallest difference in wavelength that the grating can resolve.  In a diffraction grating, the resolving power is primarily determined by the number of lines (N) on the grating and the order of diffraction (m).

The relationship between the resolving power, number of lines, and the order of diffraction is given by the equation R = mN. Both m and N are dimensionless quantities, so the resolving power is also a dimensionless quantity. In summary, the resolving power of a grating does not have specific units, as it is a dimensionless quantity that represents the ability of the optical instrument to resolve closely spaced wavelengths. It depends on the number of lines on the grating and the order of diffraction, with the relationship being R = mN.

Learn more about resolving power here:

https://brainly.com/question/913003

#SPJ11

The distance that an object with a particular moment of inertia would have to be located from an axis of rotation if it were a point mass can be calculated using the formula I = mr².

Here, I represents the moment of inertia, m represents the mass of the object, and r represents the distance from the axis of rotation. So, if we have an object with a known moment of inertia and mass, we can use this formula to calculate the distance it would need to be located from the axis of rotation if it were a point mass. This distance is important in understanding the object's rotational motion and how it will behave when subjected to different forces and torques.

More on inertia: https://brainly.com/question/15246709

#SPJ11

The final temperature of the 22.8 g sample of copper metal that absorbs 114 J of heat is approximately 49.2 °C.

To calculate the final temperature of a 22.8 g sample of copper initially at 35.4 °C that absorbs 114 J of heat, we will use the following formula:

q = mcΔT

where q is the heat absorbed (114 J), m is the mass of the copper (22.8 g), c is the specific heat of the copper metal (0.385 J/g·°C), and ΔT is the change in temperature.

First, rearrange the formula to find ΔT:

ΔT = q / (mc)

Next, plug in the values:

ΔT = 114 J / (22.8 g * 0.385 J/g·°C)

ΔT ≈ 13.8 °C

Now, to find the final temperature, add the initial temperature to the change in temperature:

Final Temperature = Initial Temperature + ΔT

Final Temperature = 35.4 °C + 13.8 °C

Final Temperature ≈ 49.2 °C

To know more about copper metal and heat refer https://brainly.com/question/21406849

#SPJ11

The period of a pendulum with length l swinging with small oscillations is given by the formula T = 2π√(l/g), where g is the acceleration due to gravity (approximately 9.81 m/s^2 on Earth).

This formula is derived from the fact that the period of a pendulum is dependent only on the length of the pendulum and the acceleration due to gravity, and not on the mass or amplitude of the pendulum's swing.

In terms of the general form of a forcing function that would result in resonance, it would depend on the specific characteristics of the system and the nature of the forcing function. However, in general, a forcing function that matches the natural frequency of the system can result in resonance, where the amplitude of the oscillations increases dramatically. For a pendulum, the natural frequency is given by the formula ω = √(g/l), where ω is the angular frequency. So, a forcing function with a frequency close to this value could result in resonance.

learn more about pendulum

https://brainly.com/question/26449711

#SPJ11

When succinic anhydride (C₄H₄O₃) is heated with ammonium chloride (NH₄Cl) at 200°C, it does not yield succinimide. So, this statement is False.

Instead, the reaction typically leads to the formation of ammonium succinate ((NH₄)₂C₄H₄O₄) and hydrogen chloride (HCl).

The reaction can be represented as: C₄H₄O₃ + 2NH₄Cl → (NH₄)₂C₄H₄O₄ + 2HCl. Succinimide, a cyclic imide, is not formed in this reaction.

Succinimide is usually obtained by other methods, such as the direct condensation of succinic acid or anhydride with ammonia.

Therefore, it is incorrect to claim that succinic anhydride yields the cyclic imide succinimide when heated with ammonium chloride at 200°C.

So, the given statement is False.

Read more about Ammonium chloride.

https://brainly.com/question/14501371

#SPJ11

The surface area of the Earth is [tex]5.14\times 10^{14}\ m^2[/tex]

According to the question:

The surface area of the earth[tex](S) = 4\pi r^2[/tex] ...(i)

The radius of the earth [tex]r = 6400\ km[/tex]

To find:

The surface area of the earth in [tex]m^2[/tex].

[tex]r = 6400\ km[/tex], therefore in meters:

[tex]r = 6400\times 1000\ m = 6400000\ m\\r = 6.4\times 10^{6}\ m[/tex]

Substitute this value in equation (i), and let [tex]\pi = 3.1415[/tex], we get:

[tex]S = 4\times 3.1415\times (6.4 \times 10^{6})^2\ m^2[/tex]

[tex]S = 5.14\times 10^{14}\ m^2[/tex]

Therefore, the surface area of the Earth is [tex]5.14\times 10^{14}\ m^2[/tex].

Read more about the surface area of spheres here:

https://brainly.com/question/28690256

The speed at which the tension in both wires is the same is approximately 7.8 m/s, and the tension in both wires at this speed is approximately 84 N.

To find the speed at which the tension in both wires is the same, we can use the equation T = mv^2/r, where T is the tension, m is the mass of the sphere, v is the speed, and r is the radius of the circle.

Since the sphere is in equilibrium, the tension in both wires must be equal. Therefore, we can set the two equations for tension equal to each other and solve for v:

T = mv^2/r  (for wire 1)
T = mv^2/r  (for wire 2)

mv^2/r = mv^2/r
v = √(Tr/m)

Plugging in the given values, we get:

v = √(T(1.5 kg)/(0.2 m))
v = √(7.5T) m/s

To find the tension, we can use either equation for tension and plug in the values:

T = mv^2/r

T = (1.5 kg)(v^2)/(0.2 m)

T = 11.25v^2 N

Substituting the expression we found for v, we get:

T = 11.25(7.5T) N

T = 84.375 N

Learn more about speed here:-

https://brainly.com/question/17661499

#SPJ11

Young's modulus of the muscle tissue is 56,811.4 Pa.

To calculate Young's modulus for the muscle tissue, we can use the formula:

Young's modulus = stress / strain

where stress is the force per unit area applied to the muscle tissue, and strain is the ratio of the change in length of the tissue to its original length.

Given that a force of 25 N is required to stretch the muscle tissue by 2.2 cm, we can calculate the stress as:

stress = force / area
      = 25 N / 0.0048 m^2
      = 5208.33 Pa

We can also calculate the strain as:

strain = change in length / original length
       = 0.022 m / 0.24 m
       = 0.0917

Therefore, the Young's modulus of the muscle tissue is:

Young's modulus = stress/strain
               = 5208.33 Pa / 0.0917
               = 56,811.4 Pa

To know more about the Young's modulus, click here;

https://brainly.com/question/30756002

#SPJ11

Therefore, there were approximately 72 pulses in the air at one time during the operation of Seasat.

Based on the given information, we can calculate the pulse repetition time (PRT) of Seasat as follows:
PRT = 1 / PRF = 1 / 1640 Hz = 0.00060975609756 seconds
Next, we can calculate the length of each pulse (Tp) using the incidence angle:
cos(23◦) = altitude / range
range = altitude / cos(23◦)
Tp = 2 x range / c = 2 x altitude x sin(23◦) / c = 8.4599 microseconds
Where c is the speed of light.
Finally, we can calculate the number of pulses in the air at one time by dividing the PRT by the pulse length:
Number of pulses = PRT / Tp = 0.00060975609756 s / 0.0000084599 s = 72.075
Therefore, there were approximately 72 pulses in the air at one time during the operation of Seasat.
To know more about pulse repetition time visit:

https://brainly.com/question/30401679

#SPJ11

The final image is located 25.7 cm away from the lens, and its size is 0.29 times the size of the object.

To find the final image's location, we need to use the lens formula, which is 1/f = 1/v - 1/u, where f is the lens's focal length, v is the image distance, and u is the object distance. We know that the object distance is 90 cm, and the lens has one concave surface and one convex surface with radii of -22.0 cm and 17.5 cm, respectively. Since the radius of the concave surface is negative, we use -22.0 cm as its value in the formula. We can find the focal length of the lens using the lensmaker's formula, which is 1/f = (n - 1)(1/r1 - 1/r2), where n is the refractive index of the lens material, and r1 and r2 are the radii of the two lens surfaces. Substituting the given values, we get f = -28.85 cm.
Plugging in the values into the lens formula, we get 1/-28.85 = 1/v - 1/90 - 1/-22. Solving for v, we get v = 25.7 cm. Therefore, the final image is located 25.7 cm away from the lens.
To find the magnification, we use the magnification formula, which is m = -v/u. Substituting the given values, we get m = -25.7/90 = -0.29. Since the magnification is negative, the image is inverted. Therefore, the final image is located 25.7 cm away from the lens, and its size is 0.29 times the size of the object.

To know more about lens visit:

https://brainly.com/question/29834071

#SPJ11

According to the given statement, the half-life (T1/2) of this isotope is 2.68 days.

I understand that you're looking for help in calculating the half-life of a certain isotope based on given decay rates. Here's a step-by-step process to find the half-life (T1/2) of this isotope:
1. You're given the initial decay rate (R1) as 8255 decays per minute and the final decay rate (R2) as 3110 decays per minute after 4.50 days.
2. Convert the time to minutes: 4.50 days * 24 hours/day * 60 minutes/hour = 6480 minutes.
3. Half-life formula: T1/2 = (t * ln(2)) / ln(R1/R2)
4. Calculate the natural logarithm of the ratio of initial and final decay rates: ln(R1/R2) = ln(8255/3110) ≈ 1.176
5. Plug the values into the half-life formula: T1/2 = (6480 * ln(2)) / 1.176 ≈ 3862.45 minutes
6. If needed, convert the result to days: 3862.45 minutes / (24 * 60) ≈ 2.68 days
The half-life (T1/2) of this isotope is approximately 2.68 days.

To know more about radioactivity visit:

brainly.com/question/30021912

#SPJ11

The wavelength of light that creates a first-order fringe at 18.8 degrees is 421.9 nm.

The wavelength of light that creates a first-order fringe can be determined using the equation: d sin θ = mλ, where d is the distance between the slits on the grating, θ is the angle of the fringe, m is the order of the fringe, and λ is the wavelength of light. Rearranging the equation to solve for λ, we get λ = d sin θ / m.

Given that the second-order fringe for red laser light at 632.8 nm occurs at an angle of 53.2 degrees, we can use the equation to solve for d, which is the distance between the slits on the grating. Plugging in the values, we get d = mλ / sin θ = 632.8 nm / 2 / sin 53.2 = 312.7 nm.

Next, we can use the calculated value of d to find the wavelength of light that corresponds to a first-order fringe at 18.8 degrees. Plugging in the values of d, θ, and m = 1 into the equation, we get λ = d sin θ / m = 312.7 nm x sin 18.8 / 1 = 421.9 nm.

Learn more about wavelength

brainly.com/question/31143857

#SPJ11

To calculate the velocity of the moving air using the given information, we can use Bernoulli's equation, which relates the pressure and velocity of a fluid. In this case, we can assume that the air is moving through a pipe and that the pressure difference measured by the manometer is due to the air's velocity.

Bernoulli's equation states that:
P1 + 1/2ρv1^2 = P2 + 1/2ρv2^2
where P1 and P2 are the pressures at two different points in the pipe, ρ is the density of the fluid, and v1 and v2 are the velocities at those points.
In this case, we can assume that the pressure at the bottom of the manometer (point 1) is equal to atmospheric pressure, since the air is open to the atmosphere there. The pressure at the top of the manometer (point 2) is therefore the sum of the atmospheric pressure and the pressure due to the velocity of the air.
Using this information, we can rearrange Bernoulli's equation to solve for the velocity of the air:
v2 = sqrt(2*(P1-P2)/ρ)
where sqrt means square root.
Plugging in the given values, we get:
v2 = sqrt(2*(101325 Pa - 13.6*10^3 kg/m^3 * 9.81 m/s^2 * 0.205 m)/(1.29 kg/m^3))
v2 ≈ 40.6 m/s
Therefore, the velocity of the moving air is approximately 40.6 m/s.

To know more about velocity visit:

https://brainly.com/question/17127206

#SPJ11

The current in the microwave is 10 amps.

To calculate the current in the microwave, we need to use Ohm's law, which states that current (I) is equal to voltage (V) divided by resistance (R). In this case, the resistance is the impedance of the microwave, which we can calculate using the formula: impedance (Z) = voltage (V) / current (I).

First, we need to convert the wattage rating of the microwave to its apparent power, which is given by the formula: apparent power (S) = voltage (V) x current (I).

So, for a microwave rated at 1,200 watts and receiving 120 volts of potential difference, the apparent power is:

S = V x I
1,200 = 120 x I
I = 1,200 / 120
I = 10 amps

Therefore, the current in the microwave is 10 amps.

To learn more about power, refer below:

https://brainly.com/question/29575208

#SPJ11

The power output of a car engine running at 2800 rpmrpm is 400 kwkw. The work done per cycle is 8 kJ, and the heat exhausted per cycle is 12 kJ.

The first law of thermodynamics states that the work done by the engine is equal to the heat input minus the heat output. If we assume that the engine operates on a Carnot cycle, then the thermal efficiency is given by

Efficiency = W/Q_in = 1 - Qout/Qin

Where W is the work done per cycle, Qin is the heat input per cycle, and Qout is the heat output per cycle.

We are given that the power output of the engine is 400 kW, which means that the work done per second is 400 kJ. To find the work done per cycle, we need to know the number of cycles per second. Assuming that the engine is a four-stroke engine, there is one power stroke per two revolutions of the engine, or one power stroke per 0.02 seconds (since the engine is running at 2800 rpm). Therefore, the work done per cycle is

W = (400 kJ/s) x (0.02 s/cycle) = 8 kJ/cycle

To find the heat input per cycle, we can use the equation

Qin = W/efficiency = (8 kJ/cycle)/(0.4) = 20 kJ/cycle

Finally, to find the heat output per cycle, we can use the equation

Qout = Qin - W = (20 kJ/cycle) - (8 kJ/cycle) = 12 kJ/cycle

Therefore, the work done per cycle is 8 kJ, and the heat exhausted per cycle is 12 kJ.

To know more about work done here

https://brainly.com/question/28813425

#SPJ4