For a reaction 2Na + 2H2O --> 2NaOH + H2, The moles of Na needed to produce exactly 5.6 liters of H2 is mathematically given as
moles of H2=0.125mole
How many moles of Na are needed to produce exactly 5.6 liters of H2,?
Generally, the equation for the Chemical Reaction is mathematically given as
2Na + 2H2O -> 2NaOH + H2(g)
Therefore, since 2Na gives 1H2
PV=nRT
Hence
n=PV/RT
n=1*5.6/0.0821 *273
n=0.249mols
In conclusion,The moles is
2Na=1H2
moles of H2=0.125mole
Read more about Chemical Reaction
https://brainly.com/question/11231920
Given what you observe at the molecular/atomic level, why would surface area have this effect?
Answer:
Increasing the surface area of a reactant increases the frequency of collisions and increases the reaction rate. Several smaller particles have more surface area than one large particle. The more surface area that is available for particles to collide, the faster the reaction will occur.
Explanation:
:)
Determine the mass of sodium acetate necessary to produce 100 ml of an acetate buffer
Explanation:
Ethanoic acid is a weak acid and dissociates:
C
H
3
C
O
O
H
⇌
C
H
3
C
O
O
−
+
H
+
For which
K
a
=
[
C
H
3
C
O
O
−
]
[
H
+
]
[
C
H
3
C
O
O
H
]
=
1.8
×
10
−
5
Please remember that these are equilibrium concentrations .
p
K
a
=
−
log
K
a
=
−
log
[
1.8
×
10
−
5
]
=
4.74
n
=
c
×
v
∴
n
C
H
3
C
O
O
H
=
0.20
×
200.0
1000
=
0.04
) Which direction does thermal energy flow in the following diagram? *
2 points
Heat flows from the ice cream to the hand.
Heat flows from the hand to the ice cream.
The system is too cold for heat to move.
Answer:
the heat flows from the hand to the ice cream
Explanation:
we produce body heat therefore it moves to the ice cream also there is no possible way the heat could move from the ice cream because the ice cream is cold
Heat flows from the hand to the ice cream. Therefore, the correct option is option B among all the given options.
What is thermal energy?When the temperature rises, a type of energy called thermal energy is produced. The amount of thermal energy usually directly inversely proportional to the object's change in temperature. Thermal energy takes the form of heat. The thermal energy of a substance increases with temperature.
The quicker movements of the substance's atoms and molecules are what cause thermal energy to rise as temperature rises. In some cases, a substance's molecules will separate from one another and leave because the temperature has such high. Unexpectedly, thermal energy also affects the states of matter. Heat flows from the hand to the ice cream.
Therefore, the correct option is option B.
To know more about thermal energy, here:
https://brainly.com/question/30819997
#SPJ7
What change would occur in the mass between the reactants (lead nitrate and potassium iodide) and the products (lead iodide and potassium nitrate)?
Please help me this is coming in my exam. Thank you
Answer:
Pb(NO
3
)
2
+
2
KI
→
PbI
2
+
2
KNO
3
Explanation:
Consider the reaction 3CH4(g)→C3H8(g)+2H2(g).
Calculate ΔG at 298 K if the reaction mixture consists of 41 atm of CH4 , 0.013 atm of C3H8 , and 2.3×10−2 atm of H2 .
Given:
ΔH for...
CH4 = -74.8 C3H8 = -103.85 H2 = 0
ΔS for...
CH4 = 0.1863 C3H8 = 0.2699 H2 = 0.13058
ΔG for...
CH4 = -50.8 C3H8 = -23.4 H2 = 0
ΔG at 298 K = 128.9 kJ
From the calculations performed, the free energy change for the reaction is 72 kJ/mol.
What is the equilibrium constant?The equilibrium constant is a value that shows the extent to which reactants have been converted to products.
Given that the equation of the reaction is;
3CH4(g)→C3H8(g)+2H2(g)
Then;
PC3H8 = 0.013 atm
PH2 = 2.3×10−2 atm
PCH4 = 41 atm
Now;
ΔG = ΔG° + RTlnQ
ΔG°reaction = ΔG°products - ΔG°reactants
ΔG°reaction = [( -23.4) +2(0)] - 3(-50.8)
ΔG°reaction = 129 kJ/mol
Q = PC3H8 * PH2^2/PCH4^3
Q = 0.013 * (2.3×10−2)^2/( 41)^3
Q = 6.877 * 10^-6/68921
Q= 9.9* 10^-11
Hence;
ΔG = 129 * 10^3 + [8.314 * 298 * (ln 9.9* 10^-11 )]
ΔG = 129 * 10^3 - 57073
ΔG = 72 kJ/mol
Learn more about free energy change: https://brainly.com/question/14143095
10) How can you find the density of any gas at standard conditions?
Which of the following statements is true?
1. The molar mass of Oz is 48 g/mol
2. A 100-gram sample contains at least 2 moles of Oz
3. 48 grams of O3 contains 6. 02 x 1023 molecules of Oz
The molar mass of Oz is 48 g/mol is true.
What is the molar mass of a substance?Molar mass of a substance is the mass of 1 mole of that substance or it is the number of grams per mole of a substance. The units for molar mass is grams/mole.
Therefore,The molar mass of Oz is 48 g/mol is correct because ozone have three oxygen and the molar mass of one oxygen is 16g/mol.
Ozone= 16×3
Ozone=48g/mol.
Learn more on molar mass here.
https://brainly.com/question/15299296
hello people ~
Identify the gas that is generally produced when coal is burnt in the presence of a lot of air.
A. Carbon monoxide
B. Sulphur dioxide
C. Nitrogen dioxide
D. Carbon dioxide
Answer:
Carbon dioxide
Explanation:
The reaction is given by
C+O_2-->C0_2CO2 is a harmful gas also responsible for the global warming and air pollution
When coal is burnt in the presence of excess air, some of the gases produced include carbon dioxide, oxides of nitrogen, and sulfur dioxide.
What are the gaseous products from coal burning?When coal is burnt in the presence of a lot of air, a variety of gases are produced: These include:
Carbon dioxide which is the major productOxides of nitrogenOxide of sulfurAside from carbon dioxide, other gases depend on the content of coal.
More on the burning of coal can be found here: https://brainly.com/question/1419068
#SPJ5
how are organelles specialized to perform various tasks in a cell?
Answer:
Organelles are structures within a cell that perform specific functions like controlling cell growth and producing energy. Plant and animal cells can contain similar types of organelles. However, certain organelles can only be found in plant cells and certain organelles can only be found in animal cells.
Carbon is the main constituent of hydrocarbons. Why some are called unsaturated hydrocarbon? Briefly describe.
Some hydrocarbons are regarded as unsaturated because they contain double or triple bonds between adjacent carbon atoms.
What are hydrocarbons?Hydrocarbons are any organic compounds that contain hydrogen and carbon in its structure.
Hydrocarbons can be grouped into the following based on whether they contain single or double bonds:
Saturated hydrocarbons - contain only single bonds e.g. alkanesUnsaturated hydrocarbons - contain double and triple bonds e.g. alkenesTherefore, it can be said that some hydrocarbons are regarded as unsaturated because they contain double or triple bonds between adjacent carbon atoms.
Learn more about hydrocarbons at: https://brainly.com/question/17578846
Which particle model diagram represents xenon at stp?
The model that should show the corresct representation of xenon gas is one in which the gas molecules are isolated and monoatomic.
What is a noble gas?A noble gas is a member of group 18 of the periodic table. Noble gases are known not to interact with each other and occur as monoatomic particles.
The images are not shown here hence the question is incomplete. However, we do know that any of the models that show individual monoatomic particles is a representation of xenon gas.
Learn more about noble gas: https://brainly.com/question/2094768
Balancing chemical equation
Explanation:
please mark me as brainlest
A nitrogen bubble with a volume of 0.0050 mL forms in the joint of a scuba diver as she ascends rapidly from a pressure of 4.1 atm to the surface, with a pressure of 1.0 atm. What is the volume of the bubble at the surface
As the scuba diver ascends rapidly to the surface at the given pressure, the volume of the nitrogen bubble at the surface becomes 0.021mL.
Boyle's lawBoyle's law states that the volume V of a given quantity of gas is inversely proportional to its pressure P as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Where P₁ is Initial Pressure, V₁ is Initial volume, P₂ is Final Pressure and V₂ is Final volume.
Given the data in the question;
Initial volume; V₁ = 0.005mL = 5.0 × 10⁻⁶LInitial pressure; P₁ = 4.1atmFinal pressure; P₂ = 1.0atm Final volume; V₂ = ?We substitute our given values into the expression above to find the final volume.
P₁V₁ = P₂V₂
[tex]V_2 = \frac{P_1V_1}{P_2} \\\\V_2 = \frac{4.1atm \ *\ 5.0*10^{-6}L}{1.0atm}\\ \\V_2 = \frac{4.1 \ *\ 5.0*10^{-6}L}{1.0}\\\\V_2 = 2.05*10^{-6}L\\\\V_2 = 0.021mL[/tex]
Therefore, as the scuba diver ascends rapidly to the surface at the given pressure, the volume of the nitrogen bubble at the surface becomes 0.021mL.
Learn more about Boyle's law: brainly.com/question/1437490
How many moles of hydrochloric acid are in 500. Ml of a 0. 300 m solution?.
Answer:
300
Explanation:
because it's not highly concentrated
The compound below is treated with chlorine in the presence of light. Draw the structure for the organic radical species produced by reaction of the compound with a chlorine atom. Assume reaction occurs at the weakest c-h bond.
Explanation:
A carbon radical is a reaction intermediate, which is produced during a free-radical reaction. These carbon radicals contain one unpaired electron on a carbon atom. Hence, these radicals are highly reactive in nature.
A free-radical reaction results in the production of a carbon radical as a reaction intermediate.
What is radical in chemistry?A radical in chemistry is indeed an atom, molecule, and ion that possesses one least one unpaired electron electron. The term "radical" is sometimes used to refer to a free radical. These unpaired electrons provide radicals, with a few exceptions, a high degree of chemical reactivity. Radicals frequently dimerize on their own. The majority of organic radicals have brief lives.
A free-radical reaction results in the production of a carbon radical as a reaction intermediate. One unpaired electron is present on the carbon atom in these radical forms of carbon. As a result, the nature of these radicals is very reactive.
Therefore, a free-radical reaction results in the production of a carbon radical as a reaction intermediate.
To know more about radical, here:
https://brainly.com/question/29643759
#SPJ6
ILL BRAINLIST ITS URGENTTT!!!!
Investigate the rate of success that CCS projects have shown and predict it’s viability as a method of reducing carbon emissions to achieve our target of zero emissions by 2050.
Answer:
With the European Climate Law, the EU committing to carbon neutrality by 2050. What does that mean in practice?
Climate change is already affecting the entire world, with extreme weather conditions such as drought, heat waves, heavy rain, floods and landslides becoming more frequent, including in Europe. Other consequences of the rapidly changing climate include rising sea levels, ocean acidification and loss of biodiversity.
In order to limit global warming to 1.5 degrees Celsius – a threshold the Intergovernmental Panel for Climate Change (IPCC) suggests is safe – carbon neutrality by mid-21st century is essential. This target is also laid down in the Paris agreement signed by 195 countries, including the EU.
In December 2019, the European Commission presented the European Green Deal, its flagship plan that aims to make Europe climate neutral by 2050. This target will be reached through the European Climate Law that sets climate neutrality into binding EU legislation.
Explanation:
ok bet i got u
Jesse is riding the bus home from school. He is moving away at 30 miles per hour. From which reference point would this description be correct? A. Jesse's home B. the driver of the bus C. the school D. another student on the bus
Answer:
the correct answer is going to be the school
0.5mol/dm3 hydrochloric acid is added gradually to a flask containing 20cm3 of 2 mol/ dm3 sodium hydroxide solution.
What is the total volume, in cm3, of the mixture in the flask when the solution is just neutral?
A 30
B 40
C 60
D 100
Answer:
The answer is B which is 40
From the calculations and the data presented, the total volume in the flask is 100cm^3
What is neutralization?A neutralization occurs between an acid and a base to yiled salt and water only.
The reaction equation here is; HCl + NaOH -----> NaCl + H2O. Now, the volume of HCl used is obtained from;
2 * 20 * 1/0.5 * 1 = 80 cm^3
Total volume in the flask = 80 cm^3 + 20cm3 = 100cm^3
Learn more about neutralization:https://brainly.com/question/15395418
#SPJ2
An ice freezer behind a restaurant has a freon leak, releasing 41.44 g of C2H2F3Cl into the air every week. If the leak is not fixed, how many kilograms of fluorine will be released into the air over 6 months? Assume there are 4 weeks in a month. mass of fluorine leaked over 6 months
Answer:
994.56
Explanation:
41.44 multiplied by 4, that gives us a month.
Then multiply by 6.
Perform the following operation
and express the answer in
scientific notation.
9.2x10^7 ÷ 3.7x10^9
Answer:
coefficient green : 2.4865
exponent (yellow) : 16
Explanation:
A student creates a model that displays a cross-section of a metal wire wrapped in plastic insulation. Which statement best describes the metal wire?
A. The metal wire is an element.
B.The metal wire is a compound.
C. The metal wire is a homogenous mixture.
D. The metal wire is a heterogeneous mixture.
Cross-section of a metal wire wrapped in plastic insulation the metal wire is an element.
What is an element?An element is a substance or material that cannot be affected by an external substance or cannot be broken down by any reaction.
Metal wire is serving as an element, it should not be easily broken or penetrated as an insulator.
Therefore, Cross-section of a metal wire wrapped in plastic insulation the metal wire is an element.
Learn more on element here,
https://brainly.com/question/18096867
what is the molarity of 1 mole of Ba+ in 2 L of water
Answer: 0.5 M
Explanation:
molarity is defined as [tex]\frac{mol}{L}[/tex]
in the question, we are already given the amount of moles of Ba+ and L of water. we can just plug it into the equation, [tex]\frac{1}{2}[/tex].
thus, the molarity will be 0.5 M
hope this helped! ♡
How many moles of Na are needed to
produce 15 moles of NaCl in the reaction
2Na + Cl2 = 2NaCl?
A conversion involving moles of one
substance to moles of another
substance.
Answer:
15 molesExplanation:
15 moles of NaCl will be obtained from 15 moles of Na.
What happens to water when it freezes?
a) it expands.
b) it forms vapor
c) its density increases.
d) its composition changes
Answer:
it expands
Explanation:
Answer:
a) it expands.
Explanation:
Water is more dense when it is a liquid, and less dense as a solid. This is why ice floats above water.
Hence, Ice expands when it freezes.
how many molecules are required to produce 15.8 moles of no2
✥ So, in 1.25 moles of NO2, you would have 1.25 moles of N and (2 x 1.25) 2.50 moles of O.
0.1 mole = Avogadro's number of particles (approx. 6.022x10^23 particles/mol)
So, #oxygen atoms = 2.50 mol x 6.022x10^23 atoms/mol
6.022x10^23 atoms/molOr, approximately 1.51x10^24 oxygen atoms.
Hope this answer helps you ✨
Draw the alkyl bromide(s) you would use in a malonic ester synthesis of ethyl 2-methylbutanoate
The structure of the alkyl bromides used in a malonic ester synthesis of ethyl 2-methyl-4-pentenoate are as drawn in the attached image.
Ethyl 2-methyl-4-pentenoate by Malonic ester synthesis.The malonic ester synthesis is a chemical reaction characterized by the alkylation of diethyl malonate or a similar ester of malonic acid at the carbon alpha (directly adjacent) to both carbonyl groups, and subsequently converted to a substituted acetic acid.
Hence, it follows from the structure of Ethyl 2-methyl-4-pentenoate that the alkyl bromides used are Ethyl bromide and methyl bromide.
Read more on Malonic ester synthesis;
https://brainly.com/question/17237043
Alkyl bromide is a compound that contains a halogen atom in alkane based structure. The structure of the alkyl bromides is attached in the image below.
What is Malonic ester synthesis?Malonic ester synthesis is the alkylation of an ester of malonic acid or diethyl malonate at alpha carbon and is converted to substituted acetic acid.
In malonic ester synthesis of ethyl 2-methyl butanoate, ethyl bromide and methyl bromide are the alkyl bromides used and their images are attached below.
Therefore, alkyl bromides used in the synthesis are ethyl bromide and methyl bromide.
Learn more about alkyl bromide here:
https://brainly.com/question/27181264
#SPJ4
Which process or processes produce an increase in entropy? i. n2(g) 3h2(g) right arrow. nh3(g) ii. c10h8(g) right arrow. c10h8(s) iii. ch3oh(l) right arrow. ch3oh(aq) i only ii and iii iii only i and iii
Entropy is commonly understood as the system's degree of disorder or unpredictability. The correct option is, (C) (iii) only
What is entropy?Entropy is a thermodynamic number that represents the inability of a system's thermal energy to be converted into mechanical work and is commonly understood as the system's degree of disorder or unpredictability.
The degree of unpredictability of a molecule rises when it transitions from a solid to a liquid state. As a result, the entropy will rise.
Similarly, when we move from a liquid to a gaseous state, the unpredictability of the molecule increases. As a result, the entropy will rise.
However, as we progress from gas to liquid to solid, the degree of molecular randomization reduces. As a result, the entropy will decrease.
Or, to put it another way, the higher the number of moles in a product, the higher the entropy.
(i) [tex]N_2(g)+3H_2(g) \rightarrow 2NH_3(g)[/tex]
Entropy falls in this reaction because the number of moles on the product side is fewer than the number of moles on the reactant side.
(ii) [tex]C_{10}H_8(g) \rightarrow C_{10}H_8(s)[/tex]
Entropy lowers in this process because the degree of randomness of the molecules diminishes as we move from a gas to a solid-state.
(iii) [tex]CH_3OH(l)\rightarrow CH_3OH(aq)[/tex]
Because the methanol liquid dissociated into ions, the number of moles present on the product side is more than the number of moles present on the reactant side, entropy rises in this reaction.
Hence, the correct option is, (C) (iii) only.
Learn more about Entropy:
https://brainly.com/question/15025401
Calculate the volume of 1.5 M nitric acid required to neutralize 30.0 mL of 7.0 M sodium
hydroxide.
HNO3 (aq) + NaOH (aq) → H2O (l) + NaNO3 (aq)
Answer:
0.14 liters nitric acid
Explanation:
Molarity = moles / liter
7.0 M = x / 0.03 L
= 0.21 moles NaOH
0.21 moles NaOH x ( 1 mole HNO3 / 1 mole NaOH) = 0.21 moles HNO3
Molarity = moles / liter
1.5 M = 0.21 moles / x
x = 0.21 moles / 1.5 M
x = 0.14 Liters HNO3
Answer:
[tex]140mL[/tex]
Explanation:
[tex]M_1V_1=M_2V_2[/tex]
[tex]M_1=1.5M[/tex] molarity of nitric acid
[tex]V_1=?[/tex] volume of nitric acid
[tex]M_2=7.0M[/tex] molarity of sodium hydroxide
[tex]V_2=30.0mL[/tex] volume of sodium hydroxide
[tex](1.5M)(V_1)=(7.0M)(30.0mL)[/tex]
[tex]V_1 =\frac{(7.0M)(30.0mL)}{1.5M}=140mL[/tex]
Hope this helps whoever needs it :)
Have a good day!!!
The specific heat capacity of iron 0. 45 j/gk. Find the molar heat capacity for iron
Answer:
The final temperature of the sample is 21.004 °C
Explanation:
The molar heat capacity for iron is 25.130 J/g.c joules per gram per Kelvin.
What is molar heat capacity?The amount of heat needed to increase one temperature of one mole of a substance is called molar heat capacity.
By the formula [tex]\rm \Delta T^\circ c = \Delta Tk[/tex]
Given that c = 0.45 J/g.C
Molar mass of iron is 55.845
Then putting the values in the equation
[tex]c= 0.45 \times 55.845 \\\\c= 25.130 \;J/g.^\circ c[/tex]
Thus, the molar heat capacity for iron is 25.130 J/g.c
Learn more about molar heat capacity
https://brainly.com/question/6363778
#SPJ4
What is the effect Coriolis effect
The Coriolis effect is a natural phenomenon in which objects appear to be deflected as they travel around and above the Earth. The Earth is always rotating, or spinning, from west to east. It completes a full rotation every 24 hours. The Coriolis effect is caused by this rotation.