help me and I will be your friend forever.

The Earth’s average orbital speed is 107226 Km/hr and the mass of the sun is 2.6 x [tex]10^{24}[/tex]  Kg

Angular speed is the rate of change of the angle turned through by the body with time taken. That is W = Ф / T

And the relationship between linear speed and angular speed is V = wr

Where

Given that the earth orbits the sun at an average circular radius of about 149.60 million kilometers every 365.26 Earth days.

a) To determine the Earth’s average orbital speed, we will make use of the below formula to calculate angular speed

W = 2[tex]\pi[/tex]/T

W = (2 x 3.143) / (365.26 x 24)

W = 6.283 / 876624

W = 7.2 x [tex]10^{-4}[/tex] Rad/hr

The Earth’s average orbital speed V = Wr

V = 7.2 x  [tex]10^{-4}[/tex] x 149.6 x [tex]10^{6}[/tex]

V = 107225.5 Km/hr

b) Based on the information given in this question, to calculate the approximate mass of the Sun, we will use Kepler's 3rd law

M = (4[tex]\pi ^{2}[/tex][tex]r^{3}[/tex]) / G[tex]T^{2}[/tex]

M = (4 x 9.8696 x 3.35 x [tex]10^{24}[/tex] ) / (6.67 x [tex]10^{-11}[/tex]  x 7.68 x [tex]10^{11}[/tex])

M = 1.32 x [tex]10^{26}[/tex] / 51.226

M = 2.58 x [tex]10^{24}[/tex] Kg

Therefore, the Earth’s average orbital speed is 107226Km/hr approximately and the mass of the sun is 2.6 x [tex]10^{24}[/tex] Kg

Learn more about Angular speed here: brainly.com/question/22247460

#SPJ1

The  charge passing through the circuit in one second is 8 C.

Charge is property of matter that causes experience of force when kept in electric or magnetic field.

Electric charge exists as the physical property of matter that causes charged matter to experience a force when positioned in an electromagnetic field. Electric charges can be positive or negative. Like charges repulse each other and unlike charges attract each other.

Charge, also understood as electric charge, electrical charge, or electrostatic charge and symbolized by q, exists as a characteristic of a unit of matter that represents the extent to which it has more or fewer electrons than protons.

As we know

I =Q/t

where I is current and Q is charge ,t is time

so put the value in formula

8 = Q/

Q  =  8 coulomb.

To learn more about charge click here

https://brainly.com/question/25923373

#SPJ9

The age of a man whose normal blood pressure measures 123 mm of hg

9 years

A quadratic equation as an equation of degree 2, meaning that the highest exponent of this function is 2. The standard form of a quadratic equation is y = a[tex]x^{2}[/tex] + bx + c, where a, b, and c are numbers and a cannot be 0

P(A) = 0.006 [tex]a^{2}[/tex] - 0.02a + 120

123 = 0.006- 0.02a + 120

0=0.006 [tex]a^{2}[/tex] - 0.02a - 3

you can use the quadratic equation  formula to solve for the man's age.

A = (-b ± ([tex]\sqrt{b^{2} - 4*a*c}[/tex])  ) / (2a)

A = (0.02 ±  [tex]\sqrt{(-0.02)^{2} - 4*0.006*(-3)}[/tex]/ (2*0.006)

A = (0.02 ± [tex]\sqrt{0.0076}[/tex]) / 0.012

A = 9 , -5.67

Age of the man will be 9 years

To learn more about quadratic equation  here

https://brainly.com/question/17177510?referrer=searchResults

#SPJ4

The large, roughly circular, dark, and somewhat younger regions on the moon are called Maria.

Lunar Maria are large, dark, basaltic plains on Earth's Moon. It was created by an ancient asteroid impacting the Moon on the far side and triggering some volcanic activity on the opposite side.

These are vast basins containing lava flows that are marked by craters, ridges, faults and straight and immersed valleys called rills. They are waterless. There are about 20 major areas of this type. Most of which include the largest located on the side of the Moon that always faces Earth.

These maria were the result of the melting and eruption of basaltic lava on the lunar surface 3.8 to 2.8 billion years ago. This type of lava was highly fluid under the Moon's weak gravitational field and spread over vast distances.

Thus, the large, roughly circular, dark, and somewhat younger regions on the moon are called Maria.

Learn more about Maria, here:

https://brainly.com/question/1968844

#SPJ2

Estimate technique capability ratio (cp, cpk, pp, PPK) is Cp = 1.33 or greater. & Cpk price ≥ 1.33.

Cp, Cpk, Pp, and Ppk are all parameters (indices) that can help us to apprehend how our technique is working relative to the specs, or in different words, they degree how near our system is jogging to its specification limits. For necessities, we measure the process specs.

The Cp index is a fundamental indication of process capability. The Cp value is calculated using the specification limits and the same old deviation of the method. most agencies require that the method Cp = 1.33 or greater. Cp and Cpk, generally called technique functionality indices, are used to outline the ability of a technique to produce a product that meets necessities.

For stable tactics and normally distributed statistics, a Cpk price ≥ 1.33 should be executed. • For chronically unstable methods with output assembly specification and a predictable sample, a Ppk fee ≥ 1. sixty-seven have to be completed.”

Learn more about limits here:-https://brainly.com/question/27585271

#SPJ4

The horizontal force needed to start the calculator moving from rest is 1.5 N

What is Kinetic friction?

It is defined as a force that acts between moving surfaces.

The magnitude of the force will depend on the coefficient of kinetic friction between the two materials.

Here,

weight of calculator, N = 3 N

The coefficients of static frictions, µ (static) = 0.50

The coefficients of kinetic frictions, µ (kinetic) = 0.40

Now,

The horizontal force required = The static friction force

F = µ (static) * weight of calculator

F = 0.50 * 3.0

F = 1.5 N

Hence,

The horizontal force needed to start the calculator moving from rest is 1.5 N

Learn more about   horizontal force here:

https://brainly.com/question/21481680

#SPJ4

Highest to lowest number:

-less than 1 solar mass

-between 1 and 10 solar masses

-between 10 and 30 solar masses

-between 30 and 60 solar masses

Stellar mass is a phrase that is used by astronomers to describe the mass of a star.

Learn more about Stellar masses here:

https://brainly.com/question/1128503

#SPJ4

It is imperative that the system-grounded conductors remain buried and is denoted as option D.

This is referred as a substance which allows electricity and heat to flow through it and examples include metals.

These conductors have to be buried so as to prevent the risk of contact and electrocution of individuals thereby making it a safe method.

Read more about Conductor here https://brainly.com/question/492289

#SPJ1

Answer:

The amount of pressure delivered to them

Explanation:

Answer: A car heading north collides at an intersection with a truck of the same mass as the car heading east. If they lock together and travel at 28 m/s at 46° north of east just after the collision, then the car initially traveling with a velocity of 40.28m/s.

Explanation: To find the answer, we need to know more about the Perfectly inelastic collision.

               [tex]m_1v_1+0=(m_1+m_2)v_2\\[/tex]

               [tex]mv_1=(m+m)28 sin46\\v_1=2*28*0.719=40.28 m/s[/tex]

Thus, we can conclude that, the initial velocity of the car will be 40.28m/s.

Learn more about the perfectly inelastic collision here:

https://brainly.com/question/28045028

#SPJ4

the answer is 47265.dug

Explanation:

im bot sure

The speed with which the puck must rotate in the circular path is 5.42 m/s.

The speed of the puck is calculated as follows;

centripetal force = weight of hanging mass

mv²/r = W

where;

v² = Wr/m

v² = (1.2 x 9.8 x 0.5) / (0.2)

v² = 29.4

v = √29.4

v = 5.42 m/s

Thus, the speed with which the puck must rotate in the circular path is 5.42 m/s.

The complete question is below:

With what speed must the puck rotate in a circle of radius 0.50 m if the block is to remain hanging at rest?

Learn more about circular path here: https://brainly.com/question/15457645

#SPJ1

Absorption of Rum and cola:

A standard rum and cola absorb faster than a 5-ounce glass of wine because carbonation causes the pyloric valve to relax.

What are Rum and Cola:

Learn more about the alcoholic beverages here,

https://brainly.com/question/9946739

#SPJ4

Time period is T if increasing the amplitude to 2A

What is Time period?

The length of time during which an activity occurs or a condition remains.

The period of a spring-mass system is proportional to the square root of the mass and inversely proportional to the square root of the spring constant.

Formula of Time period, T:

[tex]T = 2\pi \sqrt{\frac{M}{k} }[/tex]

Where,

k is the spring constant

mass of system = M

Amplitude = A

Time period = T  

Here,

The amplitude is doubled = 2A

Since from the formula we can say that, The Time period is not dependent on amplitude.

Increasing the amplitude implies increase in the restoring force. An increase in the restoring force means the mass is now accelerated to cover more distance in the same period.

So the restoring force cancels the effect of the increase in amplitude.

Hence,

Time period is T if increasing the amplitude to 2A

Learn more about time period here:

https://brainly.com/question/14051226

#SPJ4

The induced emf in the loop is  -1500 μ V or  - 0.0015 V  .

According to the question

A conducting loop in the form of a circle is placed perpendicular to a magnetic field of 0. 50 t.  

i.e

Magnetic field (B) = 0. 50 T

Area of circle or loop = [tex]\pi r^{2}[/tex]  

Now,

The area of the loop decreases at a rate of 3. 0 × 10⁻³ m/s

i.e

dA = 3. 0 × 10⁻³ meter²

dt = 1 sec  

As per the formula of Induced e.m.f in the loop

emf is dependent on number of turns of coil, shape of the coil, strength of magnet and speed with which magnet is moved. Emf is independent of resistivity of wire of the coil.

[tex]e=-B*\frac{dA}{dt}[/tex]

where A is the area of the loop.

Now ,

Substituting the values in the formula

[tex]e=-B*\frac{dA}{dt}[/tex]

[tex]e= - 0.50 *\frac{ 3 * 10^{-3}}{1}[/tex]    

e = - 0.0015 V

OR

e = -1500 * 10⁻⁶ V

e =  -1500 μ V

Negative just signifies emf will such be induced that current induced will oppose change in magnetic field though it

To know more about induced emf here:

https://brainly.com/question/16764848

#SPJ4

The principle of DC motor is based on Fleming’s left hand rule. i.e., the current carrying wires experiences a force when placed in region of space that have magnetic field.

According to Fleming’s left hand rule Stretch the thumb, forefinger, and middle finger of the left hand until they are parallel to one another. If the thumb is pointing in the direction of motion, or the force acting on the conductor, and the middle finger is pointing in the direction of the magnetic field, the forefinger is pointing in the direction of current flow.

An armature revolves inside a magnetic field of a DC motor. A DC motor's fundamental operating concept is based on the idea that whenever a current-carrying conductor is positioned inside a magnetic field, that conductor will experience mechanical force.

Learn more about DC motor here;

https://brainly.com/question/21593477

#SPJ4

The type of repetitions that are completed with an intentionally reduced range of motion is called Partial repetitions. That is option A.

Repetitions in exercise is defined as a complete exercise movement done during a workout procedure.

The different types of repetitions include the following:

Partial repetitions are those types of repetitions that are carried out while removing some part of the range of motion in the exercise.

Learn more about motion here:

https://brainly.com/question/25951773

#SPJ1

The only vertical forces acting on the wall are the weights of the man and the ladder as well as the normal force because the wall has no friction.

The maximal frictional forces are μsN2=(0.40)(900N)=360N, and N1=w1+wm=160N+740N=900N for the vertical forces to balance. At a height of 4.0 meters above the ground, the ladder makes contact with the wall. about the point of contact with the ground, balancing torques.

N2 = 174.0N because (4.0m)2 = (1.5m)(160N) + (1.0m)(35)(740N) =684N.m. It is necessary for the frictional force to counteract this horizontal force. Setting the frictional fore and n1 to a maximum of 360N and solving for the distance x along the ladder (0.4m)(360N)=(1.50m)(160N)+x(35)(740N) yields x=2.70m

When two sliding solid surfaces, fluid layers, or material components come into contact with one another, friction acts as a force to stop them from moving in the same direction. Friction comes in several forms:

The relative lateral motion of two solid surfaces in contact is opposed by dry friction. Between moving surfaces, there is kinetic friction, which is different from static friction. With the exception of atomic or molecule friction, asperities on the surface interact to produce dry friction.

When layers of a viscous fluid move in relation to one another, there is friction between them. This is known as fluid friction.

When a lubricant fluid separates two solid surfaces, it is called lubricated friction.

Learn more about friction here:

https://brainly.com/question/13030552

#SPJ4

Laccolith magma (molten rock) rising through the Earth's crust begins to spread out horizontally, prying aside the host rock strata.

Laccoliths are not unusual in the Pine Valley Mountain desert location close to St. George, Utah. The stress of the magma is high enough that the overlying strata are compelled upward, giving the laccolith its dome-like form.

A laccolith is a frame of intrusive rock with a dome-shaped top surface and a degree base, fed through a conduit from under. A laccolith bureaucracy when magma (molten rock) rising thru the Earth's crust starts to unfold out horizontally, prying aside the host rock strata. The stress of the magma is excessive enough that the overlying strata are pressured upward, giving the laccolith its dome-like form.

A laccolith is a type of igneous intrusion, shaped when magma forces its manner upwards via the Earth's crust however cools and solidifies before attaining the surface. Laccoliths are outstanding from other igneous intrusions by way of their dome-shaped upper floor and level base.

Learn more about laccoliths here:-https://brainly.com/question/2018985

#SPJ4

The length of the uniform meter stick is 50 cm and the mass of the uniform meter stick is 50 g.

The sketch of the uniform stick and the mass will be two based on the given statement.

-------------------------------------------------------  

↓      10cm           Δ       (L - 10 cm)         ↓

200g                                                      M

|---------------15 cm-----------------|

-----------------------------------------------------------------------

              ↓      8.75 cm           Δ       (L - 15 cm)         ↓

          200g                                                               M

From the first diagram, apply principle of moment;

200(10) = M(L - 10) ------- (1)

From the second diagram, apply principle of moment;

200(8.75) = M(L - 15)   ------- (2)

From equation (1); M = (2000) / (L - 10)

From equation (2); M = (1750) / (L - 15)

Solve (1) and (2);

(2000) / (L - 10) = (1750) / (L - 15)

1750(L - 10) = 2000(L - 15)

L - 10 = 2000/1750(L - 15)

L - 10 = 1.143(L - 15)

L - 10 = 1.143L - 17.14

17.14 - 10 = 1.143L - L

7.14 = 0.143L

L = 7.14/0.143

L = 50 cm

M = (2000) / (50 - 10)

M = 50 g

Thus, the length of the uniform meter stick is 50 cm and the mass of the uniform meter stick is 50 g.

Learn more about length of meter stick here: https://brainly.com/question/17225736

#SPJ1

The elongation of the spring under this load is 6.5 m (Option B)

The elongation of the spring can be obtained as illustrated below:

F = Ke

Divide both sides by K

e = F / K

e = 78 / 12

e = 6.5 m

Learn more about spring constant:

https://brainly.com/question/9199238

#SPJ1

Critical heat flux of forced convective boiling in uniformly heated vertical tubes with special reference to very large length-to-diameter ratios.

The rate of heat energy moving through a surface is known as heat flux, and the heat flux density is the amount of heat flux per unit area (Wm2).

Temperature measurements are a key component of many industrial systems. Measurements of heat flux and heat transfer provide more details. A heat flow typically occurs in conjunction with a change in temperature. A clearer picture of what's happening can be obtained by measuring both quantities.

The amount of thermal energy emitted over a solid surface is known as heat flux, and its unit is W/m2. There are two methods for measuring heat flux. Either directly utilizing heat flux sensors or indirectly using temperature sensors

To learn more about Heat flux please visit -
https://brainly.com/question/15136717
#SPJ4

An electric propeller is powered by a solenoid relay that is kept closed by the holding coil on a hydromatic propeller feathering button switch. It is a kind of feathering pump motor.

What does it mean to feather an engine?

What is meant by solenoid relay?

A form of relay designed to wirelessly change a stronger current is called a solenoid. A coil is utilized to create an electromagnetic environment when power is transferred through it, similarly to the tiny motorized cube relays, that efficiently open or shut the circuit.

Learn more about solenoids here:

https://brainly.com/question/15504705

#SPJ1

The medical understanding of death is related to the scientific approach, and the popular understanding is related to the inclusive spiritual and cultural approaches.

Death occurs when an individual's cardiorespiratory and brain functions cease due to some factor, thus ending his life.

Popular understanding, on the other hand, is aligned with scientific knowledge, but it is also encompassing cultural and religious teachings, which define topics not proven by science, such as life after death for example.

Therefore, death is a delicate topic for society, and spirituality is the basis found for greater emotional comfort in individuals who suffer significant losses of loved ones.

Find out more about scientific knowledge here:

https://brainly.com/question/1729104

#SPJ1

6.25 gram of element x would be left after 4 years.

Leftover amount of the element x = 100/2^4

= 100/16 = 6.25 gram

Thus, we can conclude that 6.25 gram of element x would be left after 4 years.

Learn more about the half life here:

brainly.com/question/15086552

#SPJ1

Doppler effect is the shift in frequency as the object gets near an object/person or far away from an object or person.

Hope it helps!

Wave power can be regarded as a reliable source of energy because the ocean currents are always moving.

Wave power is a device that can be used to convert the mechanical energy of the ocean waves into electrical energy based on the principle of conservation of energy.

The major challenges that face the use of wave power in electricity generation is the unreliability of the waves which leads to uncertainty in the quantity of power generated Also, the wave direction and direction of ocean currents all limit the amount of power generated by this method. However, in spite of challenges, it can be regarded as a reliable source of energy because the ocean currents are always moving.

Learn more about wave power:https://brainly.com/question/1362067

#SPJ1

Answer:

The 1st orbital has no nodes.

Explanation:

A 2s orbital has 1 node and a 1s orbital has no nodes, therefore it is higher in energy than a1s orbital. Also, a 2s orbital is higher in energy because the radius is larger than for a 1s orbital and, therefore, the probability of finding an electron farther from the nucleus is greater in a 2s orbital.

The number of nodes is equal to (n-1) therefore, 1s-orbitals do not have any node at the nucleus.  

A node is a point where the probability of finding an electron is zero. For a given orbital, the two kinds of nodes are radial nodes and angular nodes.

A radial node is a spherical plane where the probability of finding an electron in an orbital is zero. The number of radial nodes increases with the principal quantum number (n) as it is given by (n- l - 1) and is also known as a nodal region.

An angular node is a plane that passes through the nucleus. The angular node is given by the azimuthal quantum number 'l' and is also known as a nodal plane.

The total number of nodes in orbitals is equal to n - 1. Therefore, the nodes in 1s -orbital (1-1) = 0.

Learn more about nodes, here:

https://brainly.com/question/5097640

#SPJ2

The fact that Voyager 10 continues to speed out of the solar system even though its rockets have no fuel, is an example of Newton's first law.

Sir Isaac Newton is a British mathematician, physicist, astronomer, alchemist, theologist, author, one of the greatest mathematicians and physicists of all time, and one of the most influential scientists. Widely recognized as a person. He was a key figure in the philosophical revolution known as the Enlightenment.

Isaac Newton is best known for his discoveries in optics (composition of white light) and mathematics (calculus). His best known is the formulation of the three laws of motion, which are the basic principles of modern physics.

Newton's first law states that a stationary or uniformly moving object remains straight unless its state is changed by the action of an external force.

Learn more about Newton's law here:https://brainly.com/question/14222453

#SPJ4

The average acceleration of the particle in the time interval of 9.8 s is 10.204 m/s² opposite to the direction of motion.

Given:

Speed of particle, v₁ = 80 m/s (in positive x-direction)

Speed of particle, v₂ = -20 m/s (in opposite direction)

Time interval, Δt = 9.8 s

Calculation:

We know that, the average acceleration is given as:

a_avg = (v₂ - v₁)/ Δt     - ( 1 )

Applying values in above equation we get:

a_avg = (v₂ - v₁)/ Δt

           = (-20 m/s - 80 m/s) / (9.8 s)

           = -10.204 m/s²

Therefore the average acceleration of the particle in the time interval Δt is 10.204 m/s² opposite to the direction of motion.

Learn more about average acceleration here:

https://brainly.com/question/27184422

#SPJ4