HELP ME PLS
when your sence becomes sharper what is that
a.respitory system
b.circulatery system
c.nervouse system
d.muskeler and skeletal system

The value of u is 0.05044 ft[tex]^(-1)[/tex]. The time required to slow the sled to 11 mi/hr is approximately 6.045 sec.

(a) We have the acceleration function a(v) = -uv[tex]^(2)[/tex], where u is a constant. Using the relation v dv = a(v) dx, we have:

v dv = -uv[tex]^(2)[/tex] dx

We can integrate both sides with respect to their respective variables:

∫ v dv = -∫ u v[tex]^(2)[/tex] dx

(v[tex]^(2)[/tex])/2 = (u/3) v[tex]^(3)[/tex] + C

where C is a constant of integration.

Since the sled starts at v = 187 mi/hr (or 275.47 ft/s) when x = 0, we have:

C = (v[tex]^(2)[/tex])/2 - (u/3) v[tex]^(3)[/tex] = (275.47[tex]^(2)[/tex])/2 - (u/3) (275.47)[tex]^(3)[/tex]

(b) We are given that the sled slows down from 187 mi/hr (or 275.47 ft/s) to 11 mi/hr (or 16.17 ft/s) over a distance of 2000 ft. Therefore, we have:

∫275.47[tex]^(16.17)[/tex] v dv = -∫0[tex]^(2000)[/tex] u v[tex]^(2)[/tex] dx

Plugging in the values and simplifying, we get:

u = 0.05044 ft[tex]^(-1)[/tex]

(c) To find the time t required to slow the sled to 11 mi/hr, we can use the relation v dv = a(v) dx again, but this time with initial velocity v = 187 mi/hr (or 275.47 ft/s) and final velocity v = 11 mi/hr (or 16.17 ft/s). We have:

∫275.47[tex]^(16.17)[/tex] v dv = -∫0[tex]^(x)[/tex] u v[tex]^(2)[/tex] dx

Simplifying and solving for x, we get:

x = (275.47[tex]^(3)[/tex] - 16.17[tex]^(3)[/tex])/(3u) ≈ 1665.05 ft

The time t required to travel this distance is:

t = x/v = 1665.05/275.47 ≈ 6.045 sec (rounded to three decimal places)

Learn more about sled

brainly.com/question/9678138

#SPJ11

Yes, the crew manages to escape from the shock wave. The booster's acceleration of 150 m/s² is sufficient to counteract the shock wave's speed of 25000 km/s, allowing the spaceship to move away from the explosion faster than the shock wave can catch up.

The shock wave travels at 25000 km/s, which is equivalent to 25,000,000 m/s. Given that the spaceship is initially 15 AU away from the shock wave, we can convert this distance to meters: 1 AU is approximately 1.496 × 10^11 meters, so 15 AU is 2.244 × 10^12 meters.

To calculate the time it takes for the shock wave to reach the spaceship, we use the formula: time = distance / speed. Plugging in the values, we have: time = (2.244 × 10^12 m) / (25,000,000 m/s) ≈ 89760 seconds.

Now, let's determine the final velocity of the spaceship after accelerating for this time with an acceleration of 150 m/s². We use the equation: final velocity = initial velocity + (acceleration × time). Since the initial velocity is 0 (resting spaceship), the final velocity is: final velocity = 0 + (150 m/s² × 89760 s) ≈ 13,464,000 m/s.

The final velocity of the spaceship is significantly greater than the speed of the shock wave (25,000,000 m/s), meaning the crew successfully escapes the shock wave.

learn more about distance here:

https://brainly.com/question/14560503

#SPJ11

The collection of all possible outcomes of a probability experiment is called the sample space. It is a fundamental concept in probability theory and is used to determine the probability of an event occurring. The sample space represents all possible outcomes that can occur in a given situation.

For example, if a coin is flipped, the sample space consists of two possible outcomes – heads or tails. If a dice is rolled, the sample space consists of six possible outcomes – numbers 1 through 6. In more complex experiments, the sample space can be larger and more complicated.

The sample space can be expressed in different ways depending on the context and the experiment. It can be listed using set notation or represented graphically using a tree diagram or a Venn diagram.

Understanding the sample space is crucial for calculating probabilities and making informed decisions based on the results of a probability experiment.

For more such questions on sample space:

https://brainly.com/question/30206035

#SPJ11

Increasing the displacement of a vibrating particle in a mechanical wave from the equilibrium position will increase amplitude. The correct option is C.

The amplitude of a mechanical wave increases with the movement of a vibrating particle from its equilibrium point.

The largest distance a particle can travel from its rest position is known as amplitude, which reveals the wave's energy and intensity.

The wave's wavelength, frequency, or phase velocity are unaffected by this amplitude shift.

The wave's strength and total magnitude are therefore improved by raising the particle's displacement without changing the wave's fundamental properties, such as frequency or speed.

Thus, the correct option is C.

For more details regarding amplitude, visit:

https://brainly.com/question/9525052

#SPJ12

Your question seems incomplete, the probable complete question is:

Increasing the displacement of a vibrating particle in a mechanical wave from the equilibrium position will increase:

A) Wavelength

B) Frequency

C) Amplitude

D) Phase velocity

a. The source of centripetal force on the car is (3) the static friction force. b. The magnitude of the centripetal acceleration of the car is 8 m/s².

a. (2) The normal force on the car provides the centripetal force.b. The magnitude of the centripetal acceleration is given by a = v²/r = (20 m/s)² / (50 m) = 8 m/s². c. The magnitude of the centripetal force is given by F = m * a = (1500 kg) * (8 m/s²) = 12,000 N.

d. The minimum coefficient of static friction can be found using the formula μs = (centripetal force / weight) = (12,000 N / 1500 kg * 9.8 m/s²) ≈ 0.82.

a. The centripetal force is the force that keeps an object moving in a circular path. In this case, the normal force on the car provides this force since it acts perpendicular to the surface of the road and inward toward the center of the circle.

b. The centripetal acceleration is given by the formula a = v²/r, where v is the velocity and r is the radius of the circular path. Plugging in the given values, we find a = (20 m/s)² / (50 m) = 8 m/s².

c. The centripetal force is related to the centripetal acceleration by the formula F = m * a, where m is the mass of the car. Substituting the given values, we get F = (1500 kg) * (8 m/s²) = 12,000 N.

d. The minimum coefficient of static friction can be determined by equating the centripetal force to the maximum static friction force. The formula for static friction is given by Ff ≤ μs * N, where Ff is the frictional force, N is the normal force, and μs is the coefficient of static friction. Rearranging the equation, we have μs ≥ (Ff / N). Since the centripetal force is the maximum static friction force, we can substitute the values to find μs = (12,000 N / (1500 kg * 9.8 m/s²)) ≈ 0.82.

learn more about magnitude here:

https://brainly.com/question/14968806

#SPJ11

Constructive interference occurs at the point where the path difference between the two beams is equal to a full multiple of the light's wavelength.

In Young's double-slit experiment, a single beam of light is split into two beams that pass through two slits and then interfere with each other on a screen. The interference pattern is created by the superposition of the two waves from the two slits. When the path difference between the two beams is an integer multiple of the wavelength, the crests and troughs of the waves coincide and reinforce each other, resulting in constructive interference and bright fringes on the screen. On the other hand, when the path difference is a half multiple of the wavelength, the crests of one wave coincide with the troughs of the other wave, leading to destructive interference and dark fringes on the screen.

The key factor that determines whether constructive or destructive interference occurs in Young's double-slit experiment is the path difference between the two beams, with constructive interference occurring when the path difference is a full multiple of the light's wavelength.

To know more about interference, click here

https://brainly.com/question/16098226

#SPJ11

If a professor cannot focus her vision on anything that is further away than 1.1 meters, she likely has a condition called myopia, or nearsightedness. To correct this, she would need glasses with a negative diopter value.

The diopter value is a measurement of the refractive power of a lens, and it indicates the degree of correction needed for nearsightedness. The exact diopter value required would depend on the severity of the myopia, but it could range from -1.00 to -10.00 diopters or more. It is important for the professor to get an eye exam and a prescription from an eye doctor to ensure she gets the correct glasses with the appropriate diopter value.

More on myopia: https://brainly.com/question/29644439

#SPJ11

Her needed glasses prescription (in diopters) would be approximately +0.91 D.

To determine the corrective glasses prescription (in diopters) needed for a professor who cannot focus her vision on anything that is further away than 1.1 meters, we need to know the professor's current distance prescription (if any) and her age-related near vision loss (if any).

Assuming the professor does not have a current distance prescription and her only issue is age-related near vision loss, we can estimate her needed corrective prescription using the following formula:

Addition = 1 / (near point in meters) - 1 / (standard near point)

where the standard near point is typically considered to be 0.25 meters (25 centimeters or 10 inches).

Plugging in the given near point of 1.1 meters, we get:

Addition = 1 / 1.1 - 1 / 0.25 = 0.91

The addition is the amount of additional optical power (in diopters) that needs to be added to the professor's distance prescription to correct her near vision.

Assuming the professor has no astigmatism or other visual issues, her needed glasses prescription would be the sum of her distance prescription (which is zero in this case) and the addition.

Therefore, her needed glasses prescription (in diopters) would be approximately +0.91 D. This would be the optical power needed to correct her near vision and allow her to see clearly at a distance of 1.1 meters.

Learn more about glasses prescription

brainly.com/question/30924654

#SPJ11

you would need to be about 4 cm away from the wire carrying 10 A of current to generate the same magnetic field as the Earth.

we need to know the distance at which the magnetic field generated by a wire carrying 10 A of current is equal to the magnetic field of the Earth, which is approximately 0.5 Gauss. The formula for the magnetic field around a long straight wire is:

B = (μ0 * I) / (2 * π * r)

where B is the magnetic field in Teslas, μ0 is the permeability of free space (4π × 10⁻⁷ T m/A), I is the current in Amperes, and r is the distance from the wire in meters.

Solving for r, we get:

r = (μ0 * I) / (2 * π * B)

Plugging in the values, we get:

r = (4π × 10⁻⁷ T m/A * 10 A) / (2 * π * 0.5 × 10⁻⁴T)

r = 0.04 meters or 4 cm

To know more about magnetic field refer here :-

https://brainly.com/question/11514007#

#SPJ11

The sine ratio compares the length of one side of a right triangle to the length of the hypotenuse.

In trigonometry, the sine ratio is a fundamental concept used to relate the sides of a right triangle. It specifically compares the length of the side opposite an angle (often referred to as the "opposite" side) to the length of the hypotenuse.

The hypotenuse is the longest side of a right triangle and is the side opposite the right angle. The sine ratio is defined as the ratio of the length of the opposite side to the length of the hypotenuse. It is represented as sinθ = opposite/hypotenuse, where θ is the angle of interest.

The sine ratio is widely used in various applications, such as calculating distances, heights, and angles in fields like engineering, physics, and navigation.

Learn more about physics here:

https://brainly.com/question/28600368

#SPJ11

The complete question is:

The sine ratio compares the length of _ to the length of _.

The relativistic momentum of the spacecraft would increase by a factor of 2.73 if its speed doubled.

According to special relativity, the momentum of an object with mass increases as its velocity approaches the speed of light.

The relativistic momentum of an object with mass m and velocity v is given by the formula:

p = mγv

where γ (gamma) is the Lorentz factor, which is equal to:

γ = 1 / [tex]\sqrt{(1 - v^2/c^2)}[/tex]

where c is the speed of light in a vacuum.

If a spacecraft is traveling forward at 0.234 c, its Lorentz factor can be calculated as:

[tex]\gamma_1 = 1 / \sqrt{(1 - (0.234c)^2/c^2)}[/tex] = 1.050

Its relativistic momentum is:

[tex]p_1 = m\gamma_1v_1[/tex]

Now, if the spacecraft's speed doubles to 0.468 c, its Lorentz factor becomes:

[tex]\gamma_2 = 1 / \sqrt{(1 - (0.468c)^2/c^2)}[/tex] = 1.224

The new relativistic momentum is:

[tex]p_2 = m\gamma_2v_2[/tex]

Dividing [tex]p_2[/tex] by [tex]p_1[/tex], we get:

[tex]p_2/p_1[/tex] = [tex]\gamma _2v_2 / \gamma_1v_1[/tex] = (1.224 x 0.468c) / (1.050 x 0.234c) = 2.73

Therefore, if the spacecraft's speed doubled, its relativistic momentum would increase by a factor of 2.73.

For similar question on relativistic momentum

https://brainly.com/question/9864983

#SPJ11

The relativistic momentum of a particle with mass m and velocity v is given by:

p = γmv

where γ is the Lorentz factor, given by:

γ = 1/√(1 - v^2/c^2)

where c is the speed of light.

When the speed of the spacecraft doubles, its new speed is 2v, where v is the original speed. The new momentum is:

p' = γ'mv

where γ' is the new Lorentz factor:

γ' = 1/√(1 - (2v)^2/c^2) = 1/√(1 - 4v^2/c^2)

To find the factor by which the momentum increases, we can divide p' by p:

p'/p = γ'mv / γmv = γ'/γ

Substituting the expressions for γ and γ' and simplifying, we get:

p'/p = (1/√(1 - 4v^2/c^2)) / (1/√(1 - v^2/c^2))

p'/p = √((1 - v^2/c^2)/(1 - 4v^2/c^2))

We are given that the original speed of the spacecraft is 0.234c. Substituting this value into the above equation, we get:

p'/p = √((1 - 0.234^2)/(1 - 4(0.234)^2)) = 1.44

Therefore, if the speed of the spacecraft doubles, its relativistic momentum would increase by a factor of 1.44.

Learn more about speed here : brainly.com/question/28224010

#SPJ11

To classify the line integral of a vector field along an oriented path, we first need to determine whether the field is conservative or not.

A conservative vector field is one in which the line integral is independent of the path taken, and only depends on the endpoints of the path. This means that if we have two paths with the same starting and ending points, the line integral will be the same for both paths.

To determine if a vector field is conservative, we need to check if it satisfies the condition of being a "curl-free" field. This means that the curl of the field is zero at every point in space.

If the field is curl-free, then it can be expressed as the gradient of a scalar potential function, and the line integral can be calculated using the fundamental theorem of calculus.

If the vector field is not conservative, then we need to evaluate the line integral directly using the definition. This involves breaking the path into small segments, evaluating the field at each point along the segment, and summing up the contributions.

In order to classify the line integral, we also need to specify the orientation of the path. This is important because the line integral can have different values depending on the direction in which we traverse the path. To specify the orientation, we can use the right-hand rule, which assigns a direction to the path based on the direction of the tangent vector at each point.

In summary, to classify the line integral of a vector field along an oriented path, we need to determine if the field is conservative or not, and then evaluate the line integral using the appropriate method. The orientation of the path also needs to be specified in order to obtain a unique answer.

To know more about  line integral refer here

https://brainly.com/question/30763905#

#SPJ11

Answer:

Most geomorphologists suggest that the long axis of a drumlin reflects the direction of ice flow, with the steepest end facing the direction from which the ice came.

Explanation:

The inches below the seat should the handlebars be on a mountain bike is 4-5 inches. Hence, option A is correct.

Bike handlebars are low because this design allows them to lean forward. This position is called the Aerodynamic position and this position offers more efficiency for riders. This position makes the arms and legs of the rider which experience minimum wind resistance.

For road bikes, the minimum clearance is 2 inches or 10 centimeters. For mountain bikes, the minimum clearance is 4-5 inches to get some extra space. This helps to avoid injury to your crotch area, when you have to brake hard and jump off the saddle.

Hence, the handlebars below the mountain bike are 4-5 inches, and thus, the correct solution is option A.

To learn more about Mountain bike:

https://brainly.com/question/32024179

#SPJ1

Based on the given information, the magnetic field of an electromagnetic wave in a vacuum can be represented by the equation bz =(2.6μt)sin((1.10×107)x−ωt), where x is in meters and t is in seconds.

This equation describes a sinusoidal wave that oscillates at a frequency of ω. The amplitude of the wave is given by 2.6μt, where μt represents the magnetic permeability of the medium. In a vacuum, the magnetic permeability is equal to the permeability of free space, which is approximately 4π×10^-7 N/A^2.
The wave travels in the x direction with a wavelength of λ = 2π/k, where k = 1.10×10^7 m^-1 is the wave number. The wave number is related to the frequency and the speed of light by the equation k = ω/c, where c is the speed of light in a vacuum, which is approximately 3×10^8 m/s.
To summarize, the magnetic field of an electromagnetic wave in a vacuum is described by a sinusoidal wave with a frequency of ω, an amplitude of 2.6μt, and a wavelength of λ = 2π/k. The wave travels in the x direction with a wave number of k = 1.10×10^7 m^-1 and a speed of c = 3×10^8 m/s.

To know more about frequency visit:

https://brainly.com/question/5102661

#SPJ11

To determine the magnetic dipole moment of a small bar magnet, we need to use the formula: Magnetic Dipole Moment (m) = On-axis Magnetic Field Strength (B) x Distance from the Magnet (r)³ / 2

In this case, we know that the on-axis magnetic field strength 12 cm from the small bar magnet is 600 μt. We can convert this value to SI units by multiplying by 10⁻⁶, which gives us a value of 0.0006 T.

Now we can plug in the values into the formula:

m = (0.0006 T) x (0.12 m)³ / 2
m = 1.0368 x 10⁻⁴ A m²

Therefore, the magnetic dipole moment of the small bar magnet is 1.0368 x 10⁻⁴ A m².

The on-axis magnetic field strength 12 cm from a small bar magnet is 600 μT. What is the bar magnet's magnetic dipole moment?

a) What is the formula for the magnetic field strength on the axis of a small bar magnet at a distance r from the center of the magnet?

b) Using the formula from part (a), calculate the magnetic dipole moment of the bar magnet given that the on-axis magnetic field strength 12 cm from the magnet is 600 μT.

c) If the distance from the center of the magnet is doubled to 24 cm, what is the new on-axis magnetic field strength?

For more such questions on magnet

https://brainly.com/question/14997726

#SPJ11

The bar magnet's magnetic dipole moment is approximately

To calculate the bar magnet's magnetic dipole moment, we can use the formula:

magnetic field strength (B) = (μ₀ / 4π) * (magnetic dipole moment (m) / distance [tex](r)^3[/tex]),

where μ₀ is the permeability of free space.

Given:

On-axis magnetic field strength (B) = 600 μT = [tex]600 * 10^{(-6)}[/tex] T,

Distance (r) = 12 cm = 0.12 m.

We can rewrite the formula as:

magnetic dipole moment (m) = (B * (4π *[tex]r^3[/tex])) / μ₀.

The permeability of free space (μ₀) is approximately 4π × [tex]10^{(-7)}[/tex] T·m/A.

Substituting the known values into the formula:

m = (600 × [tex]10^{(-6)}[/tex] T * (4π * [tex](0.12 m)^3)[/tex]) / (4π × [tex]10^{(-7)}[/tex] T·m/A).

Simplifying the expression:

m ≈ 600 × [tex]10^{(-6)}[/tex] T * [tex](0.12 m)^3[/tex] / [tex]10^{(-7)}[/tex] T·m/A.

Calculating this expression, we find:

m ≈ [tex]0.0144 A-m^2.[/tex].

Therefore, the bar magnet's magnetic dipole moment is approximately [tex]0.0144 A-m^2.[/tex].

To learn more about magnetic dipole moment from the given link

https://brainly.com/question/27962324

#SPJ4

The displacement or motion of particles varies depending on the energy and temperature of the region they are in.    

As I carefully observe the animation, I notice that the displacement or motion of particles in the regions with high energy (i.e., high temperature) is more rapid and erratic than the particles in regions with low energy (i.e., low temperature). The particles in the high-energy regions move around more quickly and collide with each other more frequently, causing them to be more dispersed and less ordered. In contrast, the particles in low-energy regions move slower and have less frequent collisions, resulting in a more ordered and condensed state.

When observing an animation, the displacement of particles varies depending on factors such as the force applied, direction, and medium. In some regions, particles may experience greater displacement due to higher force, while in other regions, they might have less displacement due to lower force or opposing forces.

The motion of the particles also differs based on their direction. In one region, particles may move linearly, while in another, they might follow a curved or circular path. Additionally, the medium in which the particles are present can affect their displacement. For example, particles in a denser medium may experience lower displacement than those in a less dense medium.

In summary, as you carefully observe the animation, the displacement of particles in different regions differs due to varying factors such as force, direction, and medium. These variations result in a diverse range of motions for the particles involved.

To know more about displacement, visit:

https://brainly.com/question/30087445

#SPJ11

The force on a palm tree struck by a ball is 250 N. To prevent uprooting, a force of 3705 N must be exerted at the tip of a 20 cm root. Proper planting and maintenance can improve stability.

To calculate the force on the tree, we can use the impulse-momentum theorem, which states that the impulse applied to an object equals its change in momentum.

The ball is initially at rest, so its initial momentum is zero. After the collision, the ball has a final momentum of 0.5 kg × 5 m/s = 2.5 kg⋅m/s downward.

Therefore, the change in momentum of the ball is 2.5 kg⋅m/s. Since the collision time is 10 ms = 0.01 s, the average force applied to the tree is given by:

F = Δp/Δt = (2.5 kg⋅m/s)/0.01 s = 250 N

So the force on the tree is 250 N.

To calculate the effective force exerted by the tip of the root to keep the tree from toppling, we need to consider the torque on the tree due to the weight of the tree and the applied force. The torque due to the weight of the tree is given by:

τ = W × d = (mg) × d

where

Since the tree is vertical, the center of mass is located at the midpoint of the tree's height, or 1 m above the base. Therefore, d = 1.2 m. Assuming a density of 1000 kg/m³ for the tree, the mass of the tree is:

m = ρV = ρAh

where

Since the tree is cylindrical, A = πr², where r is the radius of the trunk. Therefore:

m = ρπr²h = 1000 kg/m³ × π × (0.1 m)² × 2 m = 62.8 kg

So the torque due to the weight of the tree is:

τ = (mg) × d = (62.8 kg × 9.81 m/s²) × 1.2 m = 741 N⋅m

To keep the tree from toppling, the applied force at the tip of the root must create an equal and opposite torque. The effective force F_eff is given by:

F_eff = τ/d = 741 N⋅m/0.2 m = 3705 N

So the effective force exerted by the tip of the root to keep the tree from toppling is 3705 N.

To ensure that the tree does not uproot easily, there are several things that could be done:

Plant the tree in a hole that is deeper and wider than the root ball, and backfill the hole with compacted soil to provide better support for the root system.

Stake the tree with guy wires anchored to the ground to provide additional support while the root system becomes established.

Select a species of palm tree that is well-suited to the local climate and soil conditions, and plant it in a location that provides adequate sunlight, water, and nutrients for healthy growth.

Prune the tree regularly to remove dead or diseased branches, and to shape the tree for optimal growth and stability.

By taking these steps, you can help ensure that your palm tree remains healthy and stable for many years to come.

Learn more about The force: brainly.com/question/12785175

#SPJ11

The coefficient of kinetic friction between the bookcase and the carpet can be determined by considering the force applied and the resulting acceleration.

To find the coefficient of kinetic friction between the bookcase and the carpet, we need to analyze the forces involved. The force applied by pushing the bookcase is 65 N. Since the bookcase accelerates at 0.12 m/s², we can calculate the net force acting on it using Newton's second law of motion, F = ma, where F is the net force, m is the mass, and a is the acceleration. Rearranging the equation, we have F = m × a. Plugging in the values, we get F = 41 kg × 0.12 m/s² = 4.92 N.

The net force acting on the bookcase is the difference between the applied force and the force of kinetic friction. So we can write the equation as F - F_k = m × a, where F_k is the force of kinetic friction. Rearranging the equation, we have F_k = F - m × a = 65 N - 4.92 N = 60.08 N.

The force of kinetic friction can be determined by multiplying the coefficient of kinetic friction (μ_k) with the normal force (N).

Since the normal force is equal to the weight of the bookcase (mg), we can write the equation as F_k = μ_k × N = μ_k × mg. Plugging in the values, we get μ_k × 41 kg × 9.8 m/s² = 60.08 N. Solving for μ_k, we find that the coefficient of kinetic friction between the bookcase and the carpet is approximately 0.145.

Learn more about coefficients of friction here

https://brainly.com/question/29281540

#SPJ11

a) To find the center of mass, we first need to find the total mass of the system. Adding the masses of the two sprinters, we get 120.8 kg. Let x be the distance from the starting point to the center of mass. We can set up an equation using the fact that the total momentum of the system is conserved:
55 kg * 4.3 m/s + 65.8 kg * 2.7 m/s = 120.8 kg * x * V
where V is the velocity of the center of mass. Solving for x, we get x = 1.67 m.
Since the first sprinter is ahead of the second by 4.1 m, the center of mass is located 4.1 m - 1.67 m = 2.43 m ahead of the second sprinter.
b) The velocity of the center of mass can be found by taking the weighted average of the velocities of the two sprinters:
V = (55 kg * 4.3 m/s + 65.8 kg * 2.7 m/s) / 120.8 kg = 3.55 m/s
So the center of mass is moving at a speed of 3.55 m/s.
c) The momentum of the center of mass is simply the mass of the system times its velocity:
P = 120.8 kg * 3.55 m/s = 429.64 kg m/s
d) The momentum of the center of mass and the total momentum of the sprinters are equal, so the answer is b.

To know more about Momentum visit:

https://brainly.com/question/30677308

#SPJ11

The pressure of electromagnetic radiation on a perfectly reflecting surface is double the pressure of the same radiation on a perfectly absorbing surface.

The pressure of electromagnetic radiation is determined by the momentum transfer of the photons that make up the radiation. When radiation hits a perfectly reflecting surface, all of the photons are reflected back with their momentum doubled. This means that the momentum transfer and therefore the pressure is also doubled compared to when the radiation hits a perfectly absorbing surface, where all of the photons are absorbed and no momentum is transferred. Therefore, the pressure of electromagnetic radiation on a perfectly reflecting surface is double the pressure of the same radiation on a perfectly absorbing surface.

Electromagnetic radiation exerts pressure on any surface it interacts with due to its momentum. When radiation is incident on a perfectly absorbing surface, the surface absorbs all the energy, and the pressure is given by P_absorbing = I/c, where I is the intensity of the radiation and c is the speed of light. When the radiation is incident on a perfectly reflecting surface, the radiation is reflected back, effectively doubling the momentum transfer, and therefore the pressure. The pressure on a perfectly reflecting surface is given by P_reflecting = 2I/c.
To know more about electromagnetic visit:

https://brainly.com/question/17057080

#SPJ11

Kirchhoff's laws, specifically Kirchhoff's first law, suggest that emission lines in a spectrum are caused when the electrons in an atom transition from higher energy levels to lower energy levels.

When an electron in an atom absorbs energy, it gets excited and moves to a higher energy level or orbital. This excitation can occur through various mechanisms, such as absorbing photons of specific wavelengths or through collisions with other particles.

However, according to Kirchhoff's first law, an excited electron in a higher energy level is unstable and tends to return to its original, lower energy level. As the electron transitions back to a lower energy level, it releases the excess energy it previously absorbed in the form of photons.

These emitted photons have specific energies, corresponding to specific wavelengths or colors, determined by the energy difference between the initial and final energy levels of the electron. The emission lines in a spectrum represent these specific wavelengths of light that are emitted when electrons transition from higher to lower energy levels.

The emission lines appear as bright lines or bands in a spectrum, indicating the presence of specific elements or compounds that emit light at those particular wavelengths. By analyzing the wavelengths of the emission lines, scientists can identify the elements present in a sample or study the characteristics of celestial objects.

Kirchhoff's laws provide fundamental principles for understanding the behavior of light and matter and have been instrumental in the development of spectroscopy, which is a powerful tool for studying the composition and properties of objects in the universe.

To know more about Kirchhoff's laws, please click on:

https://brainly.com/question/30394835

#SPJ11

Correct answer is option 4: 3.5 D. A contact lens with a power of 3.5 diopters will add enough optical power to the eye to bring the near point of a farsighted person to 25 cm.

To correct a farsighted person's near point to 25 cm, we need to find the power of contact lenses required. The near point of a farsighted person is farther away than normal, so we need to add extra optical power to the eye.

The formula for calculating the power of a lens is P = 1/f, where P is the power in diopters and f is the focal length in meters.

To correct the near point of a farsighted person to 25 cm, we need to find the focal length of the corrective lens required. The focal length is the distance at which the corrective lens will focus light and bring the image into focus on the retina.

Using the lens formula, we can calculate the focal length of the corrective lens needed as follows:

1/f = 1/0.25 - 1/2.0

1/f = 4 - 0.5

1/f = 3.5

f = 1/3.5 meters

f = 0.2857 meters

Now that we have the focal length, we can use the lens formula to find the power of the corrective lens needed:

P = 1/f

P = 1/0.2857

P = 3.5 diopters

Therefore, the correct answer is option 4: 3.5 D. A contact lens with a power of 3.5 diopters will add enough optical power to the eye to bring the near point of a farsighted person to 25 cm.

Learn more about power of 3.5 diopters

brainly.com/question/13088549

#SPJ11

The passenger on the bus measures the proper time of the clock on the bus because they are in the same frame of reference as the clock.

You, standing on the roadside, measure the proper length of the bus since you are observing it from a stationary position relative to the moving bus.

Proper time refers to the time interval measured by an observer who is in the same frame of reference as the moving object or event being observed. It is the time measured by a clock that is at rest relative to the observer.

In this case, the passenger on the bus is in the same frame of reference as the clock on the bus, and therefore, they measure the proper time of the clock.

On the other hand, proper length refers to the length of an object as measured by an observer who is at rest relative to the object being measured.

It is the length measured when the object is at rest in the observer's frame of reference. In this scenario, you, standing on the roadside, are stationary relative to the bus, and thus you measure the proper length of the bus.

The concept of proper time and proper length is significant because special relativity introduces the idea that measurements of time and distance are relative to the observer's frame of reference.

When two observers are in relative motion, they will measure different time intervals and lengths for the same event or object.

The theory of special relativity also predicts that time can dilate or "slow down" for objects or events that are moving relative to an observer.

This effect, known as time dilation, means that the passenger on the moving bus will measure a different elapsed time compared to your measurement from the stationary position.

To learn more about relativity, refer below:

https://brainly.com/question/31293268

#SPJ11

The wavelength of the waves that are traveling on this spring to create this standing wave is 4.06 meters.

A standing wave on a spring with 3 antinodes will be as follows

O O O O O O O O O O O O O O O O O O O O O

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

O O O O O O O O O O O O O O O O O O O O

Each "O" represents an antinode, which is the point of maximum displacement. The "/" and "" represent the portions of the spring where the amplitude is zero, called nodes.

In this case, there are two nodes between each pair of antinodes. Therefore, the standing wave has (3 - 1) x 2 = 4 nodes.

To calculate the wavelength of the waves traveling on this spring to create this standing wave, you can use the formula

Wavelength = Length / (Number of Nodes + 1)

In this case, the length of the spring is 20.30 m, and the number of nodes is 4. Therefore

Wavelength = 20.30 m / (4 + 1) = 20.30 m / 5 = 4.06 m

To know more about wavelength here

https://brainly.com/question/31143857

#SPJ4

The number of 109Cd atoms remaining after 71 days is 9.67×10²⁰, after 120 days is 8.49×10²⁰, and after 5400 days is 1.26×10²⁰.

The decay of a radioactive substance follows an exponential decay law given by:

N(t) = N₀ [tex]e^{(-kt)[/tex]

where N₀ is the initial number of atoms, N(t) is the number of atoms at time t, k is the decay constant, and e is the base of the natural logarithm.

The half-life of 109Cd is 462 days, which means that k can be calculated as:

ln(2) / t₁/₂ = k

ln(2) / 462 days = k

k = 0.001502 days⁻¹

Using this value of k, we can calculate the number of atoms remaining after different periods of time:

(a) After 71 days:

N(71) = N₀ [tex]e^{(-kt)[/tex]

N(71) = (1.0×10²¹) [tex]e^{(-0.001502 days^{-1} * 71 days)[/tex]

N(71) = 9.67×10²⁰ atoms

(b) After 120 days:

N(120) = N₀ [tex]e^{(-kt)[/tex]

N(120) = (1.0×10²¹) [tex]e^{(-0.001502 days^{-1} * 120 days)[/tex]

N(120) = 8.49×10²⁰ atoms

(c) After 5400 days:

N(5400) = N₀ [tex]e^{(-kt)[/tex]

N(5400) = (1.0×10²¹) [tex]e^{(-0.001502 days^{-1} * 5400 days)[/tex]

N(5400) = 1.26×10²⁰ atoms

To know more about half-life, refer to the link below:

https://brainly.com/question/24710827#

#SPJ11

When a star is moving away from us, the light it emits is subject to a phenomenon called redshift. This causes the red line of the spectrum, which is normally at a wavelength of 656 nm, to shift to a longer wavelength.

To determine the exact wavelength of the red line for the star, you would need additional information, such as the star's velocity relative to Earth. However, you can expect the red line to appear at a wavelength longer than 656 nm due to the star's motion away from us. The wavelength of a wave describes how long the wave is. The distance from the "crest" (top) of one wave to the crest of the next wave is the wavelength. Alternately, we can measure from the "trough" (bottom) of one wave to the trough of the next wave and get the same value for the wavelength.

So, the proces in which a star is moving away from us, the light it emits is subject to a phenomenon called redshift.

Learn more about wavelength at

brainly.com/question/31143857

#SPJ11

To find the number of nodes in a circuit, count the distinct points where three or more circuit elements (such as resistors, capacitors, or branches) connect together.

In a circuit, nodes are points where multiple circuit elements intersect or connect. To determine the number of nodes in a circuit, you need to identify these points. A node is characterized by the fact that all elements connected to it are at the same voltage. To find the nodes, visually examine the circuit diagram and look for distinct points where three or more elements meet. Nodes are often indicated by dots or labeled with unique symbols. Counting these distinct points will give you the total number of nodes in the circuit. Accurately identifying the nodes is crucial for analyzing and understanding the behavior of the circuit, as it helps determine voltage relationships and enables circuit analysis techniques such as Kirchhoff's laws.

Learn more about circuit here:

https://brainly.com/question/12608516

#SPJ11

The maximum incident angle θ for which the light is totally internally reflected off the sides of the crystal is approximately 45.6 degrees.

To find the maximum incident angle θ for which the light is totally internally reflected off the sides of the crystal, you need to consider the critical angle formula. The critical angle is the angle of incidence at which total internal reflection occurs.

1. First, identify the indices of refraction for air and the crystal. The index of refraction for air is approximately 1, and for the crystal, it's given as 1.4.

2. Apply the critical angle formula: sin(θc) = n2 / n1, where θc is the critical angle, n1 is the index of refraction for air (1), and n2 is the index of refraction for the crystal (1.4).

3. Calculate the critical angle: sin(θc) = 1 / 1.4. Therefore, θc = arcsin(1 / 1.4).

4. Find the value of the critical angle using a calculator: θc ≈ 45.6 degrees.

The maximum incident angle θ for which the light is totally internally reflected off the sides of the crystal is approximately 45.6 degrees.

Learn more about refraction here,

https://brainly.com/question/27932095

#SPJ11

The total magnetic flux passing through the coil is 3.8 x 10⁻⁵ T·m².

We can use Faraday's law of electromagnetic induction to calculate the magnetic flux. The equation is given as:

Where,

Φ = magnetic flux

N = number of turns in the coil

A = area of the coil

B = magnetic field strength

θ = angle between the magnetic field and the normal to the coil

Here, we have N = 1200, A = π(0.254)²/4 = 0.0507 m², B = 0.50 x 10⁻⁴ T, and θ = 0° (as the field passes at normal incidence). Plugging in the values, we get:

Therefore, the total magnetic flux passing through the coil is 3.8 x 10⁻⁵ T·m².

To learn more about magnetic flux, here

https://brainly.com/question/24214683

#SPJ4

To find the binding energy of the nucleus 30ne, we need to use the formula:

Binding energy = (mass of neutral atom - mass of nucleus) x [tex]c^{2}[/tex]

where c is the speed of light.

The mass of the neutral atom can be calculated by adding the atomic mass (which includes the electrons) and the atomic number (which is the number of protons) of neon, which is 20.

So, the mass of the neutral atom is:

20 + 20.1797 = 40.1797 u

Now we can calculate the binding energy:

Binding energy =[tex](40.1797 - 30.0192) × (3.00 × 10^{8} )^2[/tex]

Binding energy =[tex]1.08 × 10^{-10} J[/tex]

Therefore, the binding energy of the nucleus 30ne is [tex]1.08 × 10^{-10} J[/tex]

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11