How do you separate Sand Potassium Nitrate and Champhor

From the law of conservation of mass, the mass of products will be 25 g when 25 g baking soda decomposes.

Matter can be changed through physical changes or chemical changes from one form to another form, but through all these changes, the matter will be conserved.

The quantity of matter that exists before and after the change will be the same so none of the matter is created or destroyed.

The balanced equation for the decomposition of baking soda:

NaHCO₃ → Na₂CO₃ + H₂O + CO₂

Given, the mass of the baking soda = 25 g

From the law of the conservation of the mass:

The mass of the products after decomposition = 25 g

Learn more about conservation of matter, here:

brainly.com/question/23910777

#SPJ1

Answer:

C₂H6 + O2 → 2CO2 + 3H2O

The reaction of cyclohexanone with dimethylamine, in the presence of catalytic amount of an acid forms a compound as shown in the reaction sequence.

If water is continually removed throughout the reaction, the chemical that results is typically referred to as an enamine. Salts like dimethylamine hydrochloride, an odourless white solid with a melting temperature of 171.5 °C, are created when dimethylamine reacts with acids.

Methanol and ammonia undergo a catalytic reaction at high pressure and temperatures to generate dimethylamine: (CH3)2NH + 2 H2O = 2 CH3OH + NH3. Dimethylamine is a base for a number of important industrial chemicals.  Dimethyl dithiocarbamate, a precursor to zinc bis(dimethyldithiocarbamate) and other compounds used in the sulphur vulcanization of rubber, is produced when it combines with carbon disulfide.

Dimethylamine is the source of the solvents dimethylformamide and dimethylacetamide. It is used as a raw ingredient to make a variety of medications and agrichemicals, including dimefox and diphenhydramine, respectively. 

To learn more about dimethylamine refer to:

https://brainly.com/question/10592678

#SPJ4

The alkyl halide product is insoluble in water is reagent (or compound) causes the observed visual change in positive Lucas test.

To learn more about reagent refer to:

https://brainly.com/question/26905271

#SPJ4

The scripting language known as Microsoft VBScript (Visual Basic Script) was created by Microsoft and is based on Visual Basic. It is a general-purpose, lightweight, and active scripting language.

When it comes to scripting languages, JavaScript is utilised on the client side, whereas VBScript can be used on the server and client. In contrast to VBScript, which employs various operators for various operations, JavaScript employs a single operator for all operations.

VBScript is a scripting language, and that should be understood right away. PowerShell is primarily designed to be a shell, though it can also be used for scripting. Thus, learning VBScript may come naturally to you if you have experience with a scripting language like Visual Basic.

Microsoft The Microsoft scripting language known as VBScript (Visual Basic Script) is based on Visual Basic and is a general-purpose, lightweight, active language. A test automation tool called Quick Test Professional (QTP) now uses VBScript as its primary scripting language.

To learn more about vb script refer to:

https://brainly.com/question/29315859

#SPJ4

Answer:

2. 2F2O3 = 4Fe + 3O2

3. 2Na + Cl2 = 2NaCl

4. 2HgO = 2Hg + O2

5. TiCl4 + O2 = TiO2 + 2Cl2

6. 4Al + 3O2 = 2Al2O3

7. 2HCl + Zn = H2 + ZnCl2

8. 2Al + 3CuCl2 = 2AlCl3 + 3Cu.

I,II and III would be expected have sp2 hybridization on atom A . So the correct option is -I, II and III

sp2 hybridization is a type of chemical bonding in which an atom's three orbitals (one s-orbital and two p-orbitals) mix together to form three hybrid orbitals. These hybrid orbitals are oriented in a trigonal planar arrangement, and each one is directed at an angle of 120 degrees from the other two. In sp2 hybridization, one of the p-orbital remains un-hybridized, meaning that it does not participate in bonding. The unhybridized p-orbital can hold a lone pair of electrons, which gives the molecule its characteristic shape and reactivity.

Learn more about hybridization here:

https://brainly.com/question/29607102

#SPJ4

the complete question is :

Which of the following would be expected to have sp2 hybridization on atom A? O I and IV O II O I and III O I, II, and III

Dichloroethylene (C2H2Cl2) has three isomers, each of which is a different substance. The three isomers are: cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, vinyl chloride

1. cis-1,2-dichloroethylene: This isomers has the Cl atoms on the same side of the carbon-carbon double bond. Its Lewis structure would be H3C-CHCl-Cl

2. trans-1,2-dichloroethylene: This isomer has the Cl atoms on opposite sides of the carbon-carbon double bond. Its Lewis structure would be H3C-CCl2-H

3. Vinyl chloride: This isomer has one chlorine atom bonded to the carbon atom double bonded to another carbon atom. Its Lewis structure would be H2C=CHCl

Each of these isomers have different chemical and physical properties. It's worth to mention that these structures are the Lewis Structure which are not always the same as the 3D structure of the molecule.

To know more about isomers please refer: https://brainly.com/question/12796779

#SPJ4

Taking into account the reaction stoichiometry, 11.25 moles of NO can be made when 45 moles of HNO₃ are consumed.

The balanced reaction is:

3 Cu + 8 HNO₃ → 3 Cu(NO₃)₂ + 2 NO + 4 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Iit is possible to use a simple rule of three as follows: if by reaction stoichiometry 8 moles of HNO₃ form 2 moles of NO, 45 moles of HNO₃ form how many moles of NO?

moles of NO= (45 moles of HNO₃× 2 moles of NO)÷ 8 moles of HNO₃

moles of NO= 11.25 moles

Finally, 11.25 moles of NO are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

Answer:c= 21 k=294 height= 6.2 volume= 0.78

The ratio of the molar concentrations of H2PO₄⁻ to H3PO₄ is 0.09

The ratio of the molar concentrations of at a pH of 7.40, CO₃²⁻ to HCO₃⁻ is 1:1.

The number of moles of a solute per liter of solution is referred to as molar concentration or molarity.

When the reaction's balanced equation is

H₂CO₃(aq) → HCO₃ -(aq) + (H⁺)

Ka = 4.3 x10⁻⁷ and  PH = 7.4

To get PKa = -㏒ Ka

PKa = -㏒(4.3x10⁻⁷) = 6.37 by changing the Pka value in the formula below:

PH = Pka + ㏒[salt/acid]

PH= PKa + ㏒[HCO3-]/[H2CO3]

㏒[HCO⁻₃]/[H₂CO₃] = PH-Pka

[HCO₃⁻] /[H₂CO₃] = 10^(7.4 - 6.37)

∴[HCO₃⁻]/[H₂CO₃] = 11.7

∴[H₂CO₃]/[HCO₃⁻] = 1/11.7 =  0.09

This is due to the fact that the two ions are in equilibrium at a pH of 7.40, which means that for every HCO₃ molecule produced, there is also one molecule of CO₃²⁻ produced. This is as a result of the following response:

CO₂(carbon dioxide) + H₂O ⇌ H₂CO₃ ⇌ HCO₃⁻ + H⁺ ⇌ CO₃²⁻ + 2H⁺

The reaction is in equilibrium at a pH of 7.40. In light of this, the molar ratio of CO₃²⁻ to HCO₃ is 1:1.

To know more about molar concentration visit:

https://brainly.com/question/30114302

#SPJ4

RNA stays in the nucleus whereas DNA can leave is a false.

Why DNA is stored in the nucleus but RNA can leave it?

A single-stranded mRNA created during DNA transcription exits the nucleus through nuclear pores. Nuclear pores control how molecules are transported into and out of the nucleus.

Where does RNA leave?

Messenger RNAs (mRNAs), which drive protein synthesis, must be exported to the cytoplasm because of this physical barrier, whereas proteins that take part in nuclear functions are imported into the nucleus. Additionally, certain RNA types that have been exported to the cytoplasm come back into the nucleus [1].

Hence above given is a correct answer.

To know more about RNA and DNA follow link

https://brainly.com/question/14771379

#SPJ

The following choices which is an example of adaptive radiation is the ancestor species of the honeycreepers was blown over to the Hawaiian Islands from North America or Asia during a storm and populations gradually underwent natural selection, each isolated population became a different species which is denoted as option C.

This is referred to as an evolutionary process that produces new species from a single, rapidly diversifying lineage.

It occurs as a result of factors such as natural selection such as in the case of honeycreepers who underwent it and each isolated population becoming a different species.

Read more about Adaptive radiation here https://brainly.com/question/786179

#SPJ1

The concentration of 2NH₃ is zero and initial change in equilibrium for 2NH₃ is 2x.

By introducing or removing one or more reactants or products, a chemical system that is in equilibrium can be momentarily shifted out of equilibrium. To bring the system back to equilibrium, more adjustments are made to the reactant and product concentrations.

Initial:

The reactants' initial concentrations are 2.0 mol H₂ and 1.0 mol N₂. The concentration of the product 2NH₃ is initially 0.

Change:

Let's use the variable "x" to represent the change in concentration.

The reactant's concentration decreases over time by a factor of x. Put any coefficients you have in front of the variable x as -3x for 3H₂ and -x for N₂ if you have any (such as 3H₂). Since 2 moles of NH₃ are produced on the product side, its concentration will change by +2x.

Equilibrium:

Equilibrium = Initial + change

For 3H₂ = 2.0 [initial] + (-3x) [change] = 2.0 - 3x

For N₂ = 1.0 + (-x) = 1.0 - x

For 2NH₃ = 0 + 2x = 2x

To know more about equilibrium constant visit:

https://brainly.com/question/29359391

#SPJ4

Answer:

see below

Explanation:

wavelength of UV light= 2.94 * 10-⁸m .

we need to find out its frequency,

As we know that,

[tex]v = f \lambda [/tex]

hence,

3 * 10⁸ m/s = f * 2.94 * 10-⁸m

f = 3/2.94 *10⁸*10⁸

f = 1.02 * 10¹⁶s-¹

and we are done!

Answer:

i agwee!

Explanation:

Yash they are right

Based on the figure above, the boiling point of ethyl alcohol under the external pressure of 0.658 atm is option A 40 C

We know for Ethyl alcohol the boiling point at 1atm pressure is 78.37°C= 351.37K. Final pressure is 0.658atm. we know P1\P2=T1\T2 ==> T2= 0.658×351.37=231.20K= 40°C (option A). So option A is correct. The boiling point of a substance is the temperature at which it changes from a liquid to a gas (vapor) at a given pressure. At the boiling point, the vapor pressure of a liquid is equal to the pressure of the surrounding atmosphere. For a given pressure, different substances have different boiling points. The boiling point of a substance can also be affected by changes in pressure; for example, at higher altitudes, the atmospheric pressure is lower, so the boiling point of a liquid will be lower.Boiling points are a physical property of a substance and are commonly used to identify and separate different compounds in a mixture. For example, in the process of distillation, different compounds in a mixture are separated based on their different boiling points.

Learn more about ethyl alcohol here:

https://brainly.com/question/11237501

#SPJ4

the complete question is :

Based on the figure above, the boiling point of ethyl alcohol under the external pressure of 0.658 atm is ___ C?

A. 40

B.80

C.60

D.70

E.20

Answer: C. Both will dissociate.

Explanation: Polar molecules dissociate in water because they can hydrogen bond. This allows them to hydrogen bond with other water molecules which are also Polar. In general, Polar molecules dissolve in other polar solutions.

Ionic compounds dissolve in water because they can form Ion-Dipole interactions. The cation of the Ionic compound attracts the negative part of the water molecule while the anion attracts the positive part of the water molecule.

Answer: 5356.091400000158

Explanation:

Based on the hydrogen atom's spectrum, he postulated that the lines were caused by light being emitted or absorbed as an electron changed orbits within the atom (option b).

The majority of stars and the sun contain hydrogen, and Jupiter is primarily made of this element. Water is the form of hydrogen that is present on Earth in the highest amounts. Only very small amounts of it—less than 1 part per million by volume—are present in the atmosphere as a gas.

To produce energy, power, and heat, hydrogen can be used in fuel cells. Nowadays, transportation and fertilizer manufacturing are the two uses of hydrogen that are most prevalent.

To know more about Hydrogen visit:

https://brainly.com/question/28937951

#SPJ1

Answer: 7.52*10^23 molecules.

Explanation: This is a classic Stoichiometry problem.

In one mole of any substance, there are 6.02*10^23 molecules. This number is called Avogadro's number. We are given 55 grams of Co2 so to convert that to moles, we divided by the molar mass of Co2. We find the molar mass by adding the molar masses of the elements that make up the compound.

There is one molecule of Carbon and two molecules of Oxygen in one molecule of Co2. From the periodic table, the molar mass of Carbon is 12.01 and 16.00 for Oxygen. 1(12.01)+2(16.00) gives us the molar mass. We then divided 55 grams by that mass to find the number of moles. We then multiply the number of moles by Avogadro's number (6.02*10^23) to find the total number of molecules.

You can use this method for solving any problem that asks you to find the number of atoms or molecules of some number of grams of a substance.

Answer:

A blue-eyed man and a brown-eyed woman have two children, both of whom have brown eyes.

Explanation:

Dialysis is the process of removing colloids from dissolved ions, crystalloid molecules, or molecules with tiny dimensions.

To know more about dialysis visit: https://brainly.com/question/13454495

#SPJ4

When molybdenum is not accessible, vanadium nitrogenase, a crucial enzyme for nitrogen fixation found in nitrogen-fixing bacteria, is employed instead.

Vanadium is a rare element that life uses mostly through vanadium nitrogenases. Vanadium nitrogenase, a crucial enzyme in the nitrogen cycle, turns nitrogen gas into ammonia, making previously inaccessible nitrogen available to plants. Vanadium nitrogenase, in contrast to molybdenum nitrogenase, can also convert carbon monoxide into ethylene, ethane, and propane. However, both enzymes can convert acetylene to ethylene and protons to hydrogen gas . Members of the bacterial genus Azotobacter, as well as the species Rhodopseudomonas palustris and Anabaena variabilis, all include vanadium nitrogenases.Vanadium nitrogenase performs most of the same tasks as the more popular molybdenum.

Learn more   Vanadium about  here:

https://brainly.com/question/28356671

#SPJ4

Alkanes like ethane and propane are produced as a result of the nitrogenase process. This reaction can result in H2 as it transforms N2 NH3 (dihydrogen).

Diazotrophs are a class of enzymes that can convert atmospheric nitrogen into ammonia. Both MoFe protein and VFe protein, which contain vanadium, are present. Alkanes are saturated acyclic hydrocarbons. They consist of higher members like propane, methane, ethane, etc. The nitrogenase enzyme is essential for the fixation of nitrogen. The nitrogenase enzyme is used in the typical nitrogenase process to change nitrogen (N2) into ammonia (NH3). The two proteins molybdenum-iron and iron protein make up the majority of this enzyme. Alkanes like ethane and propane are produced as a result of the nitrogenase process. This reaction can result in H2 as it transforms N2 NH3 (dihydrogen). This H2 is used to create alkanes like ethane (C2H6) and propane as well as to decrease carbon monoxide (C3H8).

learn more about Alkanes  here:

https://brainly.com/question/3648919

#SPJ4

Spontaneous processes are often said to be "downhill" in free energy because they release energy in the form of heat and/or work.

The energy released during a spontaneous process is represented by a decrease in the free energy (ΔG) of the system. Free energy is a thermodynamic function that takes into account both the internal energy (U) and the entropy (S) of a system. A spontaneous process occurs when the free energy of the system decreases, which means that the internal energy of the system decreases and/or the entropy of the system increases. The free energy of a system is also related to the potential energy of the system. The potential energy of a system is the energy it possesses as a result of its position or configuration. When a system undergoes a spontaneous process, the potential energy of the system decreases, just like the free energy. Imagine a ball placed on a hilltop, the ball has potential energy because of its position, and that potential energy can be converted into kinetic energy when the ball is allowed to roll down the hill. Similarly, the potential energy of a system can be converted into heat or work during a spontaneous process. Therefore, spontaneous processes are often described as "downhill" in free energy because they involve a decrease in the potential energy of the system, similar to a ball rolling downhill. The decrease in potential energy of the system is accompanied by the release of energy in the form of heat and/or work, which makes the process spontaneous.

To know more about Spontaneous please refer: https://brainly.com/question/13790391

#SPJ4

The given statement stating that air quality is a measure of how clean or polluted the air  in an ecosystem is, hence the statement is  true.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ1

The percent abundances of the other two isotopes of masses 288 and 290 are 57.5% and 7.5% respectively.

Isotopes of an element refer to the atoms of an element that have different atomic masses.

The relative atomic mass of an element or the weighted average atomic mass of an element is the sum of the isotopic mass and the relative abundances of each of the isotopes of an element.

The percent abundances of the other two isotopes of an element that has three isotopes with mass numbers of 288, 290, and 291, and whose weighted average atomic mass of this element is 289.2, and the percent abundance of the heaviest isotope-291 is 35% is determined as follows:

Let the percent abundance of the isotope of mass 228 be x;

the percent abundance of the isotope of mass 290 will be 65% - x

289.2 = 288x + 290(0.65 - x) + 291 * 0.35

289.2 = 288x + 188.5 - 290x + 101.85

2x = 1.15

x = 0.575 or 57.5%

Hence, the percent abundances are 57.5% and 7.5% respectively.

Learn more about isotopes and percent abundances at: https://brainly.com/question/28981723

#SPJ1

Option (b) is correct. The sum of the bond enthalpies of the bonds in the reactant is less than the sum of the bond enthalpies of the bonds in the product.

Bond enthalpy is also known as bond-dissociation enthalpy. Bond enthalpy describes the amount of energy stored in a bond between atoms in a molecule. Bond dissociation enthalpy is the energy that needs to be added for the symmetrical cleavage of a bond in the gas phase. It is the amount of energy required to break one mole of a specific covalent bond in the gas phase. Average bond enthalpies are always positive as breaking bonds always requires energy. It is endothermic. Bond enthalpies are affected by the environment. There are same type of bond can have different bond energies in different environments.

To learn more about Bond enthalpy please visit:

https://brainly.com/question/26284151

#SPJ4

The most accurate statement about the bonds in reactants and products is The sum of the bond enthalpies of the bonds in the reactant is less than the sum of the bond enthalpies of the bonds in the products.

Bond-dissociation enthalpy is another name for bond enthalpy. The amount of energy held in a bond between atoms in a molecule is known as bond enthalpy. The additional energy required for a bond's symmetrical cleavage in the gas phase is known as the bond dissociation enthalpy. It is the amount of energy necessary to dissolve one mole of a particular covalent bond in gas. Because it always takes energy to break bonds, average bond enthalpies are always positive. There is endothermy. Environment has an impact on bond enthalpies. In various contexts, the same type of bond might have various bond energies.

For more much questions on bond, refer:

https://brainly.com/question/29794367

#SPJ4

Given that there is a concentration of 0.9 gram of NaCl per 100mL of water.

Therefore for 1000mL ,i.e., 1 litre of water, NaCl requirement is 0.900 × 10 = 9 grams.

Answer:

A. Zinc react with oxygen to form zinc oxide