How many grams of BE(NO2)2 are needed to make 550 mi of a 2.5 m solution?

The precipitate agent for Sulphate ion is are sodium carbon and Ba(NO₃)₂ and precipitate agent for magnesium ions are Ammonium chloride and ammonium hydroxide, percentage of fluoride in the toothpaste is 30.8%.

Precipitation is the process of changing a dissolved material from a super-saturated solution to an insoluble solid in an aqueous solution. Precipitate refers to the produced solid. The chemical agent that initiates the precipitation in an inorganic chemical process is referred to as the precipitant. 'Supernate' or 'supernatant' are other terms for the clear liquid that remains on top of the precipitated or centrifuged solid phase.

When a compound's concentration exceeds its solubility, precipitation may result. This could result from changes in temperature, solvent evaporation, or solvent mixing. Strongly supersaturated solutions produce precipitation more quickly.

Percentage = 0.105/34.07 x 100

= 0.308

= 30.8%.

A chemical reaction may lead to the precipitate's production. A white barium sulphate precipitate is created when a barium chloride solution combines with sulfuric acid. A yellow precipitate of lead(II) iodide is created when a potassium iodide solution combines with a lead(II) nitrate solution.

Learn more about Precipitate:

https://brainly.com/question/30386923

#SPJ4

Gas chromatography (GC) is selective for determining ethanol in gasoline due to its ability to separate and analyze components based on their polarity and volatility, allowing ethanol to be distinguished from other hydrocarbons with similar volatility.

GC uses a stationary phase and a mobile phase to separate compounds in a mixture. The stationary phase is often a polar substance, while the mobile phase is a non-polar gas like helium. When a mixture like gasoline is introduced into the GC system, the different components interact with the stationary phase based on their polarity. Ethanol, being more polar than other hydrocarbons in gasoline, interacts differently with the stationary phase, allowing it to be separated and identified.

Additionally, GC relies on differences in volatility between compounds. While ethanol may have similar volatility to some hydrocarbons in gasoline, the combined effect of polarity and volatility differences allows the GC method to effectively separate and detect ethanol. As the sample mixture passes through the GC column, the unique retention time of each compound, including ethanol, can be measured and used for identification.

In summary, the selectivity of the GC method for determining ethanol in gasoline is due to its ability to separate and analyze compounds based on their polarity and volatility, even in the presence of hydrocarbons with similar properties.

Know more about Gas Chromatography here:

https://brainly.com/question/29485560

#SPJ11

In the electrochemical reaction represented by the balanced equation 3Mn(s) + 2Au₃⁺(aq) → 3Mn₂+(aq) + 2Au(s), a total of 6 moles of electrons are transferred.

The balanced equation provides the stoichiometric coefficients of the reactants and products, which represent the mole ratios in the reaction. In this case, the coefficient of Mn(s) is 3, and the coefficient of Au³⁺(aq) is 2. This means that for every 3 moles of Mn atoms and 2 moles of Au⁺ ions involved in the reaction, 3 moles of Mn²⁺ ions and 2 moles of Au atoms are produced.

Since the balanced equation does not specify the number of electrons involved in the transfer, we need to consider the changes in oxidation states of the elements to determine the number of electrons spectator ions transferred. In this reaction, each Mn atom loses 2 electrons, going from an oxidation state of 0 to +2, while each Au³⁺ ion gains 3 electrons, going from an oxidation state of +3 to 0.

Therefore, for every 3 moles of Mn atoms that lose 2 electrons each and 2 moles of Au³⁺ ions that gain 3 electrons each, a total of 6 moles of electrons are transferred in the reaction.

Learn more about spectator ions here

https://brainly.com/question/31749911

#SPJ11

The diffusion of compounds such as ions, atoms, or molecules down a gradient is a. an exergonic process because it increases entropy.

In this context, exergonic refers to a spontaneous process that releases energy, typically in the form of heat or work. Entropy, on the other hand, is a measure of the degree of disorder in a system. When compounds diffuse down a gradient, they tend to move from areas of higher concentration to areas of lower concentration, thereby evening out the distribution of particles in the system. This movement results in an increase in entropy, as the system becomes more disordered.

In contrast to endergonic processes, which require an input of energy and often involve bond formation, exergonic processes such as diffusion are driven by the natural tendency of the system to move towards a state of higher entropy or disorder. So therefore the diffusion of compounds such as ions, atoms, or molecules down a gradient is a. an exergonic process because it increases entropy.

To learn more about diffusion here:

https://brainly.com/question/13513898

#SPJ11

Having a period (menstruation) is part of the menstrual cycle in females and plays a role in maintaining homeostasis in the body. It helps shed the lining of the uterus, removing excess tissue and blood, which helps regulate hormone levels and prevent the buildup of potentially harmful substances.

Menstruation is a vital part of the menstrual cycle in females, and its purpose is to maintain homeostasis in the body. During a menstrual period, the lining of the uterus is shed, resulting in the elimination of excess tissue and blood from the body. This process helps to regulate hormone levels, specifically estrogen and progesterone, which are involved in various physiological functions.

By shedding the uterine lining, the body prevents the buildup of potentially harmful substances and ensures the renewal of the endometrium for future reproductive processes. Menstruation is an essential mechanism that helps maintain a balanced environment in the uterus and promotes reproductive health and fertility.

LEARN MORE ABOUT homeostasis here: brainly.com/question/15647743

#SPJ11

The order of precipitation for the given anions,[tex]F^-, Cl^-, CrO_2^-^4[/tex], and [tex]SO_2^-^4[/tex], when titrated with [tex]Pb^2^+[/tex] can be determined by comparing their respective solubility product constant (Ksp) values.

When titrating a solution containing multiple anions with [tex]Pb^2^+[/tex], the order of precipitation can be determined by comparing the solubility product constant (Ksp) values of the corresponding salts. The anion with the lowest Ksp value will precipitate first, followed by the anions with progressively higher Ksp values.

To determine the order of precipitation, we need to consult a table of Ksp values for the given anions. Comparing the Ksp values, we find that the order of precipitation is as follows: [tex]F^- < CrO_2^-^4[/tex] < [tex]SO_2^-^4[/tex] < [tex]Cl^-[/tex].

Hence,[tex]F^-[/tex] will precipitate first, followed by [tex]CrO_2^-^4[/tex], then [tex]SO_2^-^4[/tex], and finally [tex]Cl^-[/tex]. This means that when the titration reaches the point where all the [tex]F^-[/tex] ions have reacted with [tex]Pb^2^+[/tex] and precipitated as [tex]PbF_2[/tex], further addition of [tex]Pb^2^+[/tex]will result in the precipitation of [tex]CrO_2^-^4[/tex] as [tex]PbCrO_4[/tex]. Subsequently, [tex]SO_2^-^4[/tex] will precipitate as [tex]PbSO_4[/tex], and finally, [tex]Cl^-[/tex] will precipitate as [tex]PbCl_2[/tex].

Learn more about solubility product constant here:

https://brainly.com/question/1419865

#SPJ11

There are 16 hydrogen atoms in an alkane with 7 carbon atoms.
There are 20 hydrogen atoms in an alkene with one carbon-carbon double bond and 11 carbon atoms.
There are 4 hydrogen atoms in an alkyne with one carbon-carbon triple bond and 3 carbon atoms.

To determine the number of hydrogen atoms in an alkane with 7 carbon atoms, we need to use the formula CnH2n+2, where n is the number of carbon atoms. In this case, n is 7, so the formula becomes C7H16. Therefore, there are 16 hydrogen atoms in an alkane with 7 carbon atoms.
For an alkene with one carbon-carbon double bond and 11 carbon atoms, we use the formula CnH2n. Here, n is 11, so the formula becomes C11H22. However, since there is a carbon-carbon double bond, we need to subtract two hydrogen atoms from the total number of hydrogen atoms. Therefore, there are 20 hydrogen atoms in an alkene with one carbon-carbon double bond and 11 carbon atoms.
For an alkyne with one carbon-carbon triple bond and 3 carbon atoms, we use the formula CnH2n-2. In this case, n is 3, so the formula becomes C3H4. However, since there is a carbon-carbon triple bond, we need to subtract four hydrogen atoms from the total number of hydrogen atoms. Therefore, there are 4 hydrogen atoms in an alkyne with one carbon-carbon triple bond and 3 carbon atoms.

To know more about Carbon Atoms visit:
https://brainly.com/question/2544405
#SPJ11

The first step is the slow step, and the second step is the fast step. This mechanism is a classic example of a catalytic cycle. Here are the answers to each statement:

a. OI− is not a catalyst; it is consumed in the first step and regenerated in the second step. Therefore, statement a is false.

b. I− is an intermediate because it appears in the first step and is consumed in the second step, but it does not appear in the overall reaction equation. Therefore, statement b is true.

c. O2 is a product of the reaction and is not an intermediate. Therefore, statement c is false.

d. The rate law of the reaction is determined by the slow step, which is the first step. The rate law can be written as rate = k[H2O2][OI−]. Therefore, statement d is true.

In summary, the correct statements are b and d.

To know more about refer catalytic cycle here

brainly.com/question/27539774#

#SPJ11

The current will not run in the cell if the zinc electrode is replaced with a gold electrode, and the Zn(NO solution is not changed.

If you replaced the zinc electrode with a gold electrode in the electrochemical cell described in Part LA of the experiment, the reaction at the gold electrode would not be the same as that at the zinc electrode. The gold electrode does not react with the Fe2+ ions in the same way as the zinc electrode, and therefore, the gold electrode cannot be oxidized in the same manner as the zinc electrode.

The zinc electrode can be oxidized to form Zn2+ ions, which can then react with the Fe2+ ions to form Fe(s) and Zn2+(aq). However, the gold electrode cannot be oxidized in the same way, and thus, the reaction will not proceed in the same manner.

In order for current to flow in the cell, both electrodes must be able to be oxidized and reduced in the same way as in the original cell configuration.

For more such questions on zinc electrodes:

https://brainly.com/question/13806211

#SPJ11

current would not flow in the cell if the zinc electrode were replaced with a gold electrode, as gold has a lower reactivity than zinc and cannot oxidize Fe2+ ions.

In the given electrochemical cell, the zinc electrode undergoes oxidation to form Zn2+ ions, which are reduced at the Fe electrode. This reaction occurs due to the difference in reactivity between the two metals. Zinc is more reactive than iron and can oxidize Fe2+ ions, while gold is less reactive than zinc and cannot oxidize Fe2+ ions. Therefore, replacing the zinc electrode with a gold electrode would break the circuit and prevent the flow of electrons in the cell.

Learn more about  zinc electrode here;

https://brainly.com/question/31508016

#SPJ11

The radius of the atom is 127 pm.

To find the radius of the atom in picometers (pm), we can use the formula for the volume of a BCC unit cell: V = a³, where a is the edge length, and V is the volume.

First, we find the edge length (a): a³ = 5.44×10⁻²³ cm³, so a = (5.44×10⁻²³)^(1/3) cm.

Next, the relationship between the edge length (a) and the radius (r) of an atom in a BCC unit cell is: a = 4r/√3.

Now, we can find the radius (r): r = a√3/4.

Finally, convert the radius from cm to pm: 1 cm = 1×10¹⁰ pm.

Putting it all together, we have:
r = ((5.44×10⁻²³)^(1/3) × √3/4) × 10¹⁰ pm.

Calculating this, we get r ≈ 127 pm to three significant figures.

Learn more about BCC unit cell here: https://brainly.com/question/14661647

#SPJ11

Among the given options, the strongest oxidizing agent is Au3+ (aq) with a standard reduction potential of 1.50 V. T

The strength of an oxidizing agent can be determined by its ability to accept electrons and undergo reduction.

In electrochemistry, the standard reduction potential (E°) is used as a measure of the strength of an oxidizing or reducing agent.

A higher value of E° indicates a stronger oxidizing agent.

Among the options provided:

Ag (aq) + e⁻ → Ag (s) with E° = 0.80 V

Au3+ (aq) + 3e⁻ → Au (s) with E° = 1.50 V

Br2 (l) + 2e⁻ → 2Br⁻ (aq) with E° = 1.09 V

Comparing the standard reduction potentials, we find that Au3+ (aq) has the highest value of 1.50 V, indicating that it has the strongest tendency to accept electrons and undergo reduction.

Therefore, Au3+ (aq) is the strongest oxidizing agent among the given options.

It is important to note that a stronger oxidizing agent is capable of oxidizing other substances more readily by accepting electrons, while a stronger reducing agent is more easily oxidized by donating electrons.

Learn more about oxidizing agent here:

https://brainly.com/question/29137128

#SPJ11

The boiling point of a solution depends on the concentration of the solute particles in the solution.

The boiling point elevation (ΔTb) can be calculated using the following equation:

ΔTb = Kb × molality

where Kb is the molal boiling point elevation constant of the solvent (water, in this case), and molality is the concentration of the solute in moles per kilogram of solvent.

For water, Kb is equal to 0.512 °C/m.

To calculate the boiling point elevation caused by the NaCl in the solution, we need to first determine the molality of the solution.

The molality (m) can be calculated using the following equation:

m = moles of solute / mass of solvent (in kg)

Assuming that we have 1 kg of water as the solvent (since the mass of solute is much smaller than the mass of solvent), the moles of NaCl in the solution can be calculated as:

moles of NaCl = 0.321 mol/L × 1 L = 0.321 mol

The mass of solvent (water) is 1 kg.

So, the molality of the solution is:

m = 0.321 mol / 1 kg = 0.321 mol/kg

Now we can calculate the boiling point elevation caused by the NaCl:

ΔTb = Kb × molality

ΔTb = 0.512 °C/m × 0.321 mol/kg = 0.164 °C

This means that the boiling point of the NaCl solution is 0.164 °C higher than the boiling point of pure water, which is 100 °C at standard atmospheric pressure. Therefore, the boiling point of the solution is:

Boiling point = 100 °C + 0.164 °C = 100.164 °C

So the boiling point of a 0.321 m aqueous solution of NaCl is 100.164 °C.

To know more about boiling point elevation (ΔTb) refer here

https://brainly.com/question/30481261#

#SPJ11

One liter of gas D can be produced by reacting one liter of gas B at the same temperature and pressure.

To produce gas D from gas B, the reaction must be carried out in a 1:1 stoichiometric ratio. This means that one mole of gas D is produced for every mole of gas B consumed in the reaction. Since both gases are at the same temperature and pressure, the volume ratio can be directly equated to the mole ratio. Therefore, one liter of gas B must react to give one liter of gas D.

It is important to note that the above relationship only holds true for the specific reaction in question. If the reaction were to involve different gases or conditions, the stoichiometric ratio and volume relationship would differ.

Learn more about stoichiometric ratio

brainly.com/question/6907332

#SPJ11

Taking into account the definition of dilution, the volume of the concentrated reagent 18M H₂SO₄ required to prepare 225 ml of 2.0M solutionis 25 mL.

Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.

The amount of solute does not change, but as more solvent is added, the concentration of the solute decreases and the volume of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

In this case, you know:

Replacing in the definition of dilution:

18 M× Vi= 2 M× 225 mL

Solving:

Vi= (2 M× 225 mL)÷ 18 M

Vi= 25 mL

In summary, the volume of the concentrated reagent is 25 mL.

Learn more about dilution:

brainly.com/question/6692004

#SPJ1

All three compounds (CO2, I2, and SiF4) are nonpolar due to their symmetric structures and the cancellation of their dipole moments.

Hi! I'm happy to help you determine the polarity of the given molecules and polyatomic ions. The three compounds you mentioned are CO2 (carbon dioxide), I2 (iodine), and SiF4 (silicon tetrafluoride).
1. CO2: Carbon dioxide is a linear molecule with a central carbon atom bonded to two oxygen atoms. Due to the symmetrical distribution of the oxygen atoms and their equal electronegativities, the dipole moments cancel out, making CO2 a nonpolar molecule.
2. I2: Iodine forms a diatomic molecule with two iodine atoms bonded together. Since both atoms are the same element, they share an equal electronegativity, which means that there is no unequal distribution of electrons. Thus, I2 is a nonpolar molecule.
3. SiF4: Silicon tetrafluoride is a tetrahedral molecule with a central silicon atom bonded to four fluorine atoms. The fluorine atoms are arranged symmetrically around the silicon atom, causing the dipole moments to cancel each other out. As a result, SiF4 is also considered a nonpolar molecule.
In summary, all three compounds (CO2, I2, and SiF4) are nonpolar due to their symmetric structures and the cancellation of their dipole moments.

To know more about molecule visit :

https://brainly.com/question/16555534

#SPJ11

The bond order for the sulfur-oxygen bond in SoCl2 is 2. The number of charge clouds around the central atom is 3. The geometry of the charge cloud is trigonal planar (represented by the letter "E" in the scheme). The hybridization of the central atom is sp2. The number of bonding charge clouds around the central atom is 2 and the number of non-bonding charge clouds around the central atom is 1.

The Lewis Dot Structure for SOCl2 has sulfur (S) as the central atom, which forms a double bond with oxygen (O) and single bonds with the two chlorine (Cl) atoms. Here are the answers to your questions:
1. The bond order for the sulfur-oxygen bond is 2.
2. The number of charge clouds around the central atom (sulfur) is 4.
3. The geometry of the charge cloud is Tetrahedral (VSEPR notation: AX4).
4. The hybridization of the central atom (sulfur) is sp3.
5. The number of bonding charge clouds around the central atom (sulfur) is 3.
6. The number of non-bonding charge clouds around the central atom (sulfur) is 1.
7. The observed shape is Trigonal Pyramidal (VSEPR notation: AX3E).

To know more about hybridization visit:

https://brainly.com/question/14140731

#SPJ11

To determine the mass of the sample in units of grams, we will consider the given information: carbon-14 has a half-life of 5730 years, and the sample of pure carbon-14 has an activity of 0.55 μCi.

1. First, we need to find the decay constant (λ) using the half-life (t1/2) formula:

t1/2 = ln(2) / λ

λ = ln(2) / 5730 years

2. Convert the activity of 0.55 μCi to disintegrations per second (dps):

1 μCi = 3.7 x [tex]10^4[/tex] dps

0.55 μCi = 0.55 x 3.7 x [tex]10^4[/tex]dps

3. Calculate the number of carbon-14 atoms (N) using the activity (A) and decay constant (λ):

A = λN

N = A / λ

4. Find the mass of the sample using the number of carbon-14 atoms (N) and the molar mass of carbon-14 (M):

Molar mass of carbon-14: 14 g/mol

Avogadro's number (NA): 6.022 x 10^23[tex]10^{23[/tex] atoms/mol

Mass = (N / NA) x M

By following these steps and substituting the provided values, you can calculate the mass of the sample in units of grams.

To know more about carbon-14 refer here

https://brainly.com/question/4206267#

#SPJ11

The balanced equation for the combustion of acetylene is:C2H2 + 5O2 → 4CO2 + 2H2O

From the balanced equation, we can see that for every 1 mole of C2H2, 5 moles of O2 are required for complete combustion. At STP (standard temperature and pressure), 1 mole of gas occupies 22.4 L.

Therefore, to find the volume of C2H2 required, we need to first determine the number of moles of O2 present in 66.0 L at STP:

n(O2) = V(P/RT) = (66.0 L)(1 atm / 0.0821 L·atm·K^-1·mol^-1·273 K) = 3.17 mol

Since the stoichiometric ratio of C2H2 to O2 is 1:5, we need 1/5 as many moles of C2H2 as we have moles of O2:

n(C2H2) = (1/5) n(O2) = (1/5)(3.17 mol) = 0.634 mol

Finally, we can convert the moles of C2H2 to volume at STP:

V(C2H2) = n(C2H2) (22.4 L/mol) = (0.634 mol) (22.4 L/mol) = 14.2 L

Therefore, 14.2 L of C2H2 are required to react completely with 66.0 L of O2 at STP.

Learn more about mole here:brainly.com/question/30892840

#SPJ11

The concentration of hydronium ions in a 0.100 M hypochlorous acid solution with a Ka value of 3.5 x 10⁻⁸ is (b) 1.9 × 10⁻⁵ M.

The dissociation reaction for hypochlorous acid is:

HOCl(aq) + H₂O(l) ⇌ H₃O⁺(aq) + OCl⁻(aq)

The equilibrium constant expression for this reaction is:

Kₐ = [H₃O⁺][OCl⁻]/[HOCl]

We are given the value of Kₐ as 3.5 x 10⁻⁸ and the initial concentration of HOCl as 0.100 M. Let the concentration of H₃O⁺ and OCl⁻ at equilibrium be x M. Then we can write:

[tex]K_a = \frac{x^2}{0.100 - x}[/tex]

Since the dissociation constant is very small, we can assume that the change in concentration of HOCl is negligible compared to its initial concentration. This means that we can assume that x ≈ [H₃O⁺] ≈ [OCl⁻]. Substituting this in the above expression, we get:

[tex]K_a = \frac{x^2}{0.100 - x}[/tex]

[tex]3.5 \times 10^{-8} = \frac{x^2}{0.100 - x}[/tex]

x² = 3.5 x 10⁻⁹ (0.100 - x)

x² = 3.5 x 10⁻⁹ (0.100) - 3.5 x 10⁻⁹ x

x² + 3.5 x 10⁻⁹ x - 3.5 x 10⁻¹⁰ = 0

Solving for x using the quadratic formula:

[tex]x = \frac{{-3.5 \times 10^{-9} \pm \sqrt{{(3.5 \times 10^{-9})^2 + 4 \times 1 \times (3.5 \times 10^{-10})}}}}{{2 \times 1}}[/tex]

x = 1.9 × 10⁻⁵ M or x = -1.9 × 10⁻⁵ M

Since the concentration of H₃O⁺ cannot be negative, the only valid solution is:

[H₃O⁺] = [OCl⁻] = 1.9 × 10⁻⁵ M

Therefore, the hydronium ion concentration of the 0.100 M hypochlorous acid solution is 1.9 × 10⁻⁵ M.

The correct answer is (b) 1.9 × 10⁻⁵ M.

To know more about the hydronium ion refer here :

https://brainly.com/question/14619642#

#SPJ11

What is the hydronium ion concentration of a 0.100 M hypochlorous acid solution with Ka = 3.5 x 10⁻⁸ The equation for the dissociation of hypochlorous acid is:

HOCl(aq) + H₂O(l) ⇌ H₃O⁺(aq) + OCl⁻(aq)

Group of answer choices

a. 5.9 × 10-4 M

b. 1.9 × 10-5 M

c. 1.9 × 10-4 M

d. 5.9 × 10-5 M

a. The relationship among these constituents can be diagrammed as CO₂ + H₂O ⇌ H₂CO₃ ⇌ H⁺ + HCO₃⁻.

b. In the blood, CO₂ is mostly transported in the form of bicarbonate ion (HCO₃⁻) (Option E).

The relative abundance of each constituent depends on the pH of the blood. If CO₂ forms in the blood, it will react with water to form carbonic acid (H₂CO3), which will then dissociate into hydrogen ions (H+) and bicarbonate ions (HCO₃⁻).

When CO₂ forms in the blood, it primarily reacts with water to form carbonic acid (A). Carbonic acid then dissociates into hydrogen ions (D) and bicarbonate ions (E). Most of the CO₂ (about 70%) is transported in the blood in the form of bicarbonate ions (E). A smaller amount of CO₂ (about 23%) binds to deoxyhemoglobin (B) to form carbaminohemoglobin. The remaining CO₂ (about 7%) is transported as dissolved CO₂ (C) in the blood plasma.

Thus, the correct option for question b is E.

Learn more about bicarbonate ion: https://brainly.com/question/14044780

#SPJ11

The vapor pressure in a sealed flask containing 15.0 g of glycerol, C₃H₈O₃, dissolved in 105 g of water at 25.0°c is approximately 23.10 mmHg.

To calculate the vapor pressure in the sealed flask, we need to use the Raoult's Law formula: P_solution = X_water * P_water, where X_water is the mole fraction of water in the solution, and P_water is the vapor pressure of pure water at 25.0°C.

First, calculate the moles of glycerol and water:
- Glycerol (C₃H₈O₃) has a molar mass of 92.09 g/mol: moles of glycerol = 15.0 g / 92.09 g/mol = 0.163 moles
- Water (H₂O) has a molar mass of 18.01 g/mol: moles of water = 105 g / 18.01 g/mol = 5.83 moles

Next, calculate the mole fraction of water (X_water):
X_water = moles of water / (moles of water + moles of glycerol) = 5.83 / (5.83 + 0.163) = 0.973

Now, use the vapor pressure of pure water at 25.0°C, which is approximately 23.76 mmHg:
P_solution = X_water * P_water = 0.973 * 23.76 mmHg = 23.10 mmHg

Thus, the vapor pressure in the sealed flask containing 15.0 g of glycerol is approximately 23.10 mmHg.

Learn more about Raoult's Law here: https://brainly.com/question/28304759

#SPJ11

The change in the entropy which will occurs in the system when the 35.0 g of the isopropyl alcohol and condenses from the gas to the liquid is 65.4 JK⁻¹.

The entropy change is as :

ΔS = Q / T

Where,

Q is the total heat energy :

Q = n ΔH

Where,

n is the number of moles

ΔH is the enthalpy of vaporization

The mass of the isopropyl alcohol = 35 g

The moles of the isopropyl alcohol = mass / molar mass

The moles of the isopropyl alcohol = 35 / 60

The moles of the isopropyl alcohol = 0.583 mol

The entropy change = (39.9 × 10³ × 0.583) / 82.30 + 273

The entropy change = 65.4 JK⁻¹

To learn more about entropy here

https://brainly.com/question/1477087

#SPJ4

The rate law for the reaction [tex]2 I^- + S_2O_8^{2-} = I_2 + 2 SO_4^{2-[/tex] is:

rate = [tex]k[I^-]^2[S_2O_8^{2-}][/tex]

where k is the rate constant and [[tex]I^-[/tex]] and [[tex]S_2O_8^{2-}[/tex]] represent the concentrations of iodide and persulfate ions, respectively. The exponent of 2 on [[tex]I^-[/tex]] indicates that the reaction is second-order with respect to iodide ion concentration.

The exponent of 1 on [[tex]S_2O_8^{2-}[/tex]] indicates that the reaction is first-order with respect to persulfate ion concentration.

The exponents on the concentrations in the rate law equation represent the order of the reaction with respect to each reactant. In this case, the exponent of 2 on [[tex]I^-[/tex]] indicates that the reaction is second-order with respect to iodide ion concentration.

This means that doubling the concentration of iodide ions will quadruple the rate of the reaction, all other factors being equal.

For more question on rate law click on

https://brainly.com/question/16981791

#SPJ11

Based on the given data, Complex A will appear green.

Based on the absorption maxima provided, Complex A will appear green. The absorption maxima represent the wavelengths of light that are most strongly absorbed by the complex ions. Complex A has an absorption maxima at 701 nm, indicating that it absorbs light in the red region of the visible spectrum. According to the subtractive color model and the concept of complementary colors, the color observed is the complementary color of the absorbed light. In this case, since Complex A absorbs red light, which is located opposite to green on the color wheel, the observed color will be green.

This phenomenon can be explained by the fact that when light interacts with a substance, certain wavelengths are selectively absorbed while others are transmitted or reflected. The absorbed wavelengths contribute to the color that is perceived, while the transmitted or reflected wavelengths determine the color that is observed. In the case of Complex A, the absorption of red light results in the perception of its complementary color, green.

Learn more about absorption

brainly.com/question/30697449

#SPJ11

To calculate the binding energy per nucleon for Ba141, we need to first determine the total binding energy for the nucleus. The total binding energy can be calculated by subtracting the total mass of the nucleons from the actual mass of the nucleus. The mass of the nucleons is calculated by multiplying the mass of a proton by the number of protons and the mass of a neutron by the number of neutrons.

The mass of Ba141 is 140.883 amu. Since the atomic number of Ba is 56, it has 56 protons. To find the number of neutrons, we subtract the atomic number from the mass number, which gives us 85 neutrons.

The mass of a proton is 1.0073 amu, and the mass of a neutron is 1.0087 amu. Therefore, the total mass of the nucleons is (56 x 1.0073) + (85 x 1.0087) = 140.180 amu.

To calculate the binding energy, we subtract the mass of the nucleons from the actual mass of the nucleus, which is 140.883 - 140.180 = 0.703 amu.

The binding energy per nucleon can be found by dividing the binding energy by the number of nucleons. Ba141 has 141 nucleons, so the binding energy per nucleon is 0.703 / 141 = 0.005 amu.

Therefore, the binding energy per nucleon for Ba141 is 0.005 amu.

To know more about Mass visit :
https://brainly.com/question/15959704

#SPJ11

The mole fraction of ethanol in the solution is found to be  0.0244.

The mole fraction of ethanol is found below:

n = mass of ethanol / molar mass of ethanol

n = 6.00 g / 46.07 g/mol

n = 0.1305 mol

We then find the number of moles of water:

n for water = mass of water / molar mass of water

n for water = 94.00 g / 18.02 g/mol

n for water = 5.216 mol

The total number of moles in the solution is:

n  = 0.1305 mol + 5.216 mol

n = 5.3465 mol

We find the mole fraction of ethanoas;

mole fraction of ethanol = n of ethanol / total moles

mole fraction of ethanol = 0.1305 mol / 5.3465 mol

mole fraction of ethanol = 0.0244

Learn more about mole fraction at:

https://brainly.com/question/1601411

#SPJ4

The balanced equation is: C3H8O + 5O2 -> 3CO2 + 4H2O.


To balance the equation C3H8O + O2 -> CO2 + H2O, we need to make sure that the number of atoms on both sides of the arrow is equal. First, let's count the number of atoms on each side of the equation. On the left side, we have 3 carbon atoms, 8 hydrogen atoms, and 2 oxygen atoms. On the right side, we have 3 carbon atoms, 8 hydrogen atoms, and 7 oxygen atoms.

To balance the equation, we need to add coefficients to the molecules on the left side until the number of atoms is equal on both sides. Let's start by balancing the carbon atoms. There are 3 carbon atoms on both sides, so we don't need to add any coefficients to balance them.

Next, let's balance the hydrogen atoms. There are 8 hydrogen atoms on both sides, so we don't need to add any coefficients to balance them.

Finally, let's balance the oxygen atoms. There are 2 oxygen atoms on the left side and 7 oxygen atoms on the right side. To balance the equation, we need to add coefficients to the molecules on the left side so that there are 7 oxygen atoms on both sides. We can do this by adding a coefficient of 5 to the O2 molecule on the left side. This gives us the balanced equation:

C3H8O + 5O2 -> 3CO2 + 4H2O.

In this equation, there are 3 carbon atoms, 8 hydrogen atoms, and 7 oxygen atoms on both sides of the arrow, so the equation is balanced.

To learn more about balanced chemical equation visit:

brainly.com/question/28294176

#SPJ11

The balanced equation is:

Pb(OH)₂⁻⁴(aq) + 4ClO(aq) → PbO₂(s) + 4Cl(aq) + 2H₂O(l)

In this reaction, Pb(OH)₂ is oxidized to PbO₂, while ClO⁻ is reduced to Cl−. Therefore, the oxidizing agent is ClO⁻, and the reducing agent is Pb(OH)₂⁻⁴.

To know more about refer balanced equation here

brainly.com/question/12192253#

#SPJ11

The expression for Kf for Fe(CN)6^3- is option D: [Fe(CN)6^3-] [Fe^3+] [6CN^-]^6. This is the correct expression for the formation constant of the complex ion Fe(CN)6^3-, which is the equilibrium constant for the formation of the complex from Fe^3+ and CN^- ions.

The expression includes the concentrations of all the species involved in the reaction, raised to the appropriate stoichiometric coefficients, and multiplied together. This expression can be derived from the balanced chemical equation for the formation of the complex ion and the definition of the equilibrium constant.
The expression for the formation constant Kf for Fe(CN)₆³⁻ can be given by the following equation:
Kf = [Fe(CN)₆³⁻] / ([Fe³⁺] [CN⁻]⁶)
The correct option is:
A) [Fe(CN)₆³⁻] / ([Fe³⁺] [CN⁻]⁶)
This expression represents the equilibrium constant for the formation of Fe(CN)₆³⁻ from its constituent ions, Fe³⁺ and CN⁻.

To know more about complex ion visit:

https://brainly.com/question/31310283

#SPJ11

It would take 5.37 seconds for the concentration of A to decrease from 0.700 M to 0.260 M in a first-order reaction with a rate constant of 0.720[tex]s^-1[/tex] at 400°C.

The rate of a first-order reaction can be described by the following equation: ln[A]t = ln[A]0 - kt, where [A]t is the concentration of A at time t, [A]0 is the initial concentration of A, k is the rate constant, and t is time. Rearranging the equation gives t = (ln[A]0 - ln[A]t)/k. Substituting the given values, it would take 5.37 seconds for the concentration of A to decrease from 0.700 M to 0.260 M in a first-order reaction with a rate constant of 0.720  [tex]s^-1[/tex] at 400°C. First-order reactions are commonly observed in chemistry and have a constant rate that is proportional to the concentration of the reactant.

Learn more about first-order reaction here:

https://brainly.com/question/12446045

#SPJ11