how should non-azeotropic refrigerant blends be charged

for the given solvents Protic are  CH3OH, CH3CH2OH, acetic acid, H2O

Aprotic are  DMF, DMSO, acetonitrile, acetone.

Protic solvents are solvents that have a hydrogen atom bonded to an oxygen or nitrogen atom (such as water or ethanol), and are capable of forming hydrogen bonds with other molecules. These solvents can act as a hydrogen bond donor. Aprotic solvents, on the other hand, do not have a hydrogen atom bonded to an oxygen or nitrogen atom, and therefore do not have the ability to form hydrogen bonds.These solvents are not hydrogen bond donors. Examples of aprotic solvents include dimethyl sulfoxide (DMSO) and acetonitrile. Protic solvents are generally better solvents for protic compounds, while aprotic solvents are generally better solvents for aprotic compounds. They also have different effects on chemical reactions, as protic solvents.

Learn more about aprotic solvents here:

https://brainly.com/question/29346943

#SPJ4

Interactions between two hexane molecules occur through London dispersion forces, which are weak intermolecular forces that arise due to the temporary dipoles produced by the motion of electrons in the molecules.

These forces become stronger as the molecules become larger, and so hexane molecules, which have long hydrocarbon chains, experience fairly strong London dispersion forces. These forces allow the hexane molecules to interact with one another in a way that they can form weak associations, which are important for the formation of liquid hexane.

Additionally, when two hexane molecules approach one another, they may also experience dipole-dipole interactions, which are slightly stronger than London dispersion forces. These interactions occur when the molecules have a slightly different distribution of electrons and attract one another.

Lastly, hexane molecules can also experience hydrogen bonding, which is the strongest intermolecular force and occurs when a hydrogen atom covalently bonded to an electronegative atom is attracted to an electronegative atom in a different molecule.

Learn more about interactions:

https://brainly.com/question/25902447

#SPJ4

A polyatomic ion, often called a molecular ion, is a set of covalently bound atoms or a metal complex that can be thought of as acting as a single unit and has a net charge that is not zero.

Chlorate. ClO₃⁻,Hydroxide. OH⁻,Carbonate. CO₃⁻²,Sulfate. SO₄⁻²,Phosphate. PO₄⁻³,Ammonium. NH₄⁺

Similar to how ions are created when neutral atoms acquire or lose electrons, polyatomic ions are created when neutral molecules gain or lose electrons. Because the total number of electrons in the molecule is more than the total number of protons in the molecule, a polyatomic ion is a collection of covalently bound atoms with a net charge. A polyatomic ion's net charge must be equal to the formal charges added to each of its atoms in the Lewis dot structure.

A molecule that has been ionised by gaining or losing electrons is referred to as a polyatomic ion. The group of atoms that are covalently linked together to form a polyatomic ion has a net charge because the total amount of electrons and protons in the molecule is not equal. When depicting Lewis dot structures, the total charge on a polyatomic ion is equal to the sum of the formal charges on each of the atoms in the ion.

List of Common Polyatomic Ions

[AsO3]3-Arsenate

[BO3]3-Borate

[PO3]3-Phosphite

[PO4]3-Phosphate

[SiO3]2-Silicate

[SO4]2-Sulfate

[SO3]2-Sulfite

[S2O3]2-Thiosulfate

[H2PO4]–Dihydrogen phosphate-

[OH]–Hydroxide

[HSO4]–Hydrogen sulphate

[NO3]–Nitrate

[NO2]–Nitrite

[ClO4]–Perchlorate

[MnO4]–Permanganate

To know more about Polyatomic ion,refer to:

https://brainly.com/question/13659069

#SPJ4

CH4 is the compound with the lowest boiling point.

Helium has the lowest melting temperature of all chemical elements, and carbon has the greatest melting point.

With a reduction in molecule size, the strength of the London dispersion forces also reduces Therefore, in this situation, the molecule with the fewest branches and shortest length has the smallest boiling point.

To know more about boiling point visit:

brainly.com/question/2153588

#SPJ1

The complete question is -

Which one of the following compounds will have the lowest boiling point?  (a) NH3 (b) C2H6 (c) CH3 (d) H2O

1284.689 grams of sodium nitrate will be produced from 15.1 moles of silver nitrate.

To determine how many grams of sodium nitrate will be produced from 15.1 moles of silver nitrate, we need to perform a balanced equation and stoichiometry calculation.

The balanced equation for the reaction between silver nitrate and sodium chloride to form silver chloride and sodium nitrate is:

AgNO3 (aq) + NaCl (s) → AgCl (s) + NaNO3 (aq)

We know that 15.1 moles of silver nitrate will react with the stoichiometric amount of sodium chloride, which is 1 mole of sodium chloride for every 1 mole of silver nitrate.

So, we can calculate the moles of sodium nitrate that will be produced by multiplying the moles of silver nitrate by the coefficient of sodium nitrate in the balanced equation:

15.1 moles AgNO3 * 1 mole NaNO3 / 1 mole AgNO3 = 15.1 moles NaNO3

To convert the moles of sodium nitrate to grams, we can use the molar mass of sodium nitrate, which is 84.99 g/mol.

15.1 moles NaNO3 * 84.99 g/mol = 1284.689 g

So, 1284.689 grams of sodium nitrate will be produced from 15.1 moles of silver nitrate.

Learn more about sodium nitrate in brainly.com/question/24256699

#SPJ1

The amount, in moles, of carbon that are needed to produce 562 grams of carbon dioxide would be 12.77 mols.

Carbon dioxide can be produced from the reaction of carbon and oxygen according to the following equation:

[tex]C + O_2 --- > CO_2[/tex]

From the reaction, the mole ratio of carbon to carbon dioxide is 1;1.

Recall that: mole = mass/molar mass

Thus, the mole equivalent of 562 grams of carbon dioxide would be:

562/44 = 12.77 mol

This amount of carbon dioxide will also be the amount of carbon that will be required to react since the mole ratio is 1 to 1.

In other words, from the established stoichiometric mole ratio, the number of moles of carbon needed to produce 562 grams of carbon dioxide would be 12.77 mol.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

The ketal derived from ethylene glycol and cyclohexanone can be drawn as follows. The two reactant molecules are shown in the center of the diagram.

The ethylene glycol molecule has two oxygen atoms, each of which is bound to two hydrogen atoms. The cyclohexanone molecule has a ring of six carbon atoms, each of which is bound to one hydrogen atom and one oxygen atom.

The two molecules are connected through a single bond between the oxygen atom of ethylene glycol and the carbon atom of cyclohexanone. The resulting product is a molecule with two oxygen atoms, each of which is bound to two hydrogen atoms, and a ring of six carbon atoms, each of which is bound to two hydrogen atoms and two oxygen atoms. This molecule is the ketal derived from ethylene glycol and cyclohexanone.

Learn more about cyclohexanone:

https://brainly.com/question/28163979

#SPJ4

At pH 7.0, Valine and Tyrosine will both exist in their uncharged forms. The Valine will be drawn as a CH₃CH(NH₂)₂ group and the Tyrosine will be drawn as a C₆H₄CH(OH)CH₂NH₂ group.

Both amino acids will be linked together by a peptide bond, which is a covalent bond that will be formed between the carboxyl group of one amino acid and the amino group of another amino acid. This will create the dipeptide Val-Tyr, which will be drawn as a

CH₃CH(NH₂)CO-C₆H₄CH(OH)CH₂NH₂.

The carboxyl group of Valine will be linked to the amino group of Tyrosine, forming a single molecule.

Learn more about peptide:

https://brainly.com/question/28709758

#SPJ4

C4H12 + 7 O2 → 4 CO2 + 6 H2O is the balanced chemical equation for the equation C4H12+O2 → CO2 + H2O.

Chemical reactions are representations of chemical processes using symbols, with the reactants & products identified by their unique chemical formulae. The five basic types of chemical reactions are combining, decomposing, single-replacement, double-replacement, and combustion.

An arrow representing a reaction merely shows that something has altered and transformed. The arrow points in the direction of the subsequent object from the preceding one (the one that added). The reaction arrow is used in the "equation of reaction". The thing that started the reaction is known as the reactant.

To know more about chemical equation visit :

https://brainly.com/question/28294176

#SPJ1

The speed of the rock after 10 seconds of free fall would be approximately 122 meters per second (274 mph).

What is rock?

Rock is a solid material composed of a combination of minerals, such as quartz, feldspar, mica, and other minerals. Rocks are formed by the process of weathering, erosion, and deposition of material from the Earth's crust, which is composed of rock materials. Rocks are classified based on their composition and origin. The three main types of rocks are sedimentary, igneous, and metamorphic. Sedimentary rocks form from sediments that are transported and deposited by water, wind, or ice. Igneous rocks form when molten rock material cools and crystallizes. Metamorphic rocks form when existing rocks are changed by intense heat and pressure. Rocks are an important part of the Earth's surface and are used in many applications, such as construction, landscaping and the production of certain materials. Rocks can also provide information about the geologic history of an area.

To learn more about rock

https://brainly.com/question/89259

#SPJ1

If the formula in cell d49 is copied to cells e49. The sequence of values would be generated are C, C, C.

We can observe from the attached excel file that the formula in cell d49 indicates;

= $D$44

This means that the value in cell d49 will be the same as the value in cell e49 because Excel copies the result when it moves or copies a cell that contains a formula.

Since C is the value in d44, it follows that C will also be the value in e49.

The values in cells E49 and F49 will likewise be C using the same reasoning Excel employs when copying formulas.

Your question is incomplete but most probably the proper image of the excel sheet attached below

Read more on excel copying formulas at; https://brainly.com/question/26053797

#SPJ4

One mole of nitrogen (N₂) gas reacts with 3 moles of hydrogen (H₂) gas to produce 2 moles of ammonia (NH₃).

When nitrogen gas (N₂) reacts with hydrogen gas (H₂) in the presence of a catalyst, the reaction produces ammonia (NH₃). The balanced equation for this reaction is: N₂ + 3H₂ --> 2NH₃.

This means that for every mole of nitrogen gas that reacts, 3 moles of hydrogen gas are needed and 2 moles of ammonia are produced. This reaction is the basis for the Haber-Bosch process, which is used industrially to produce ammonia on a large scale. The reaction is exothermic and occurs at high temperature and high pressure, with a catalyst such as iron or ruthenium used to increase the rate of reaction.

To learn more about ammonia visit: https://brainly.com/question/14854495

#SPJ4

A semi-permeable paper barrier called filter paper is positioned perpendicular to an air or liquid flow. It is employed to separate tiny solid particles from gases or liquids.

Paper and cellulose filters are made from cellulose fibers and are intended for general filtration. That particle retention level might be as low as 2.5 m. This kind of membrane filter must be folded in order to be used in simple gravity filtering using a plastique or glass filtration funnel.

For critical gravimetric analysis, this grade serves as a global benchmark. Of all the Whatman cellulose filter papers, it is renowned for having the best particle retention.

To know more about Filter Paper visit:

https://brainly.com/question/6870130

#SPJ4

A red laser with a wavelength of 676 nm would have a frequency of 4.43 x hertz.

The frequency in physics is the quantity of waves passing a fixed location in a unit of time. It also indicates how many cycles or vibrations a body in periodic motion experiences in a given unit of time.

Frequency is defined as the rate of changes in current direction per second. It is given in hertz (Hz), an internationally recognized unit of measurement. One hertz is equal to one cycle per second. A cycle is the technical term for a whole alternating current or voltage pulse.

To know more about frequency visit:

https://brainly.com/question/14316711

#SPJ1

Pyruvate is oxidized to Acetyl-CoA in the cytoplasm. The molecules produced are 2 carbon dioxide molecules, 2 NADH molecules, and 2 Acetyl CoA's. ;The process converts pyruvate to Acetyl CoA because otherwise, it cannot be introduced to the Citric Acid Cycle.

To learn more about acetyl CoA refer to:

https://brainly.com/question/14510638

#SPJ4

p-Ethylphenol (4-EP) is an organic compound with the formula C₂H₅C₆H₄OH.

It is one of three isomeric ethyl phenols. It is a white solid that occurs as an impurity in xylenol and is used as such in the manufacture of commercial phenolic resins. It is also a precursor of 4-vinylphenol. On average, 4-ethylphenol is most abundant in red wine. 4-Ethylphenol has also been detected but not quantified in several different foods such as B. Arabica coffee (Coffea arabica), beer, corn (Zea mays), milk (cattle), red raspberry (Rubus idaeus). Ethyl (ethyl group; Et):

Part of the molecular structure corresponding to ethane minus one hydrogen atom:

Sometimes abbreviated as - CH₂CH₃.

Learn more about the ethylphenol in

https://brainly.com/question/3804927

#SPJ4

The mass of O2 gas is about 6.9 g.

It is a law which link a gas's pressure, volume, and temperature.

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvins.

We can use this equation to find the number of moles of gas, and then use the molar mass of O2 to find the mass of the gas.

First, we can rearrange the ideal gas law to solve for n:

n = (PV) / (RT)

We know that P = 0.900atm, V = 21.4L, R = 0.08206 Latm/molK, and T = 257K.

Substituting these values into the equation:

n = (0.900atm * 21.4L) / (0.08206 Latm/molK * 257K)

Now we know the number of moles of O2 gas. To find the mass, we can use the molar mass of O2, which is 32.00 g/mol.

mass = n * molar mass

mass = n * 32.00 g/mol

So, the mass of O2 gas is about 6.9 g.

To know more about the mass, visit:

brainly.com/question/19694949

#SPJ1

In the last flask, which contained 7.5g of baking soda initially, add vinegar. The fact that a reaction takes place proves that vinegar was the limiting reactant.

What limiting reagent is used in the balloon experiment?

Each flask should contain about 15 drops of bromothymol blue after the balloons have been removed. The first flask, which contained 2.0 baking soda initially, should now contain baking soda. The fact that a reaction takes place proves that baking soda was the limiting reactant. Calculating how much product each reactant can produce and identifying the limiting reagent by which one produces the least amount of product is one method of doing so.

Since oxygen is the limiting reactant, lowering the oxygen input is the best way to reduce soot.

To learn more about oxygen refer to:

brainly.com/question/26073928

#SPJ1

Answer:

1.) plastics are poor conductors of heat and electricity

2.) plastics are non reactive metals they are not attacked by chemicals

3.) plastics are lightweight strong and durable

4.) plastics can be moulded and dyed easily in many colours like orange, pink ,sky blue , red, green, and e.t.c

the four uses of plastics are:

1.) bakelite is used to make electric switches insulating casings and handle of cookware and tools

2.) melamine is heat resistant and is used to make kitchenware , floor tiles and special suits for firefighters

3.) Teflon is used as a non stick coating on cookware as both water and oil do not stick to it

4.) many plastics are waterproof and therefore

they are used to make Water bottles and waterproof containers

Explanation:

Search it up bro :')

The four properties of plastics are malleability, longevity, cheapness, and poor conductivity.

Plastics are generally very malleable and can be molded into different shapes very easily. Different types of plastics have different melting points, which enables them to be shaped into different shapes and make objects.

Plastics are generally very durable and have a long shelf life. That is the reason why plastics are used to make things that go through a lot of wear and tear. A negative aspect of this is that plastics, when exposed to natural processes of degradation, do not break down easily and harm the environment.

Plastics are usually cheap and can be obtained at a very less price. This helps people afford goods made out of plastic and also reduces the production cost of the goods.

Plastics are generally very poor conductors of heat and electricity. This means that they do not conduct heat and electricity very well, which is why they are used as insulators and wire coverings.

Learn more about plastics at:

https://brainly.com/question/28420086?referrer=searchResults

The chemical entity's atomic number, commonly referred to as the nuclear charge number, is the charging number of an atoms (sign Z). This is the same as the proton amount (pn), which is the number of protons found in typical nuclei.

What is the function of a nucleus?

The nucleus houses the genes, which are parts that contain the genetic material, and regulates and directs the actions of the organism Inside the nucleus, tiny formations known as nucleoli are frequently found. The gel-like matrix where the nuclear components are suspended is known as the nucleoplasm.

How does the nucleus get built?

Atomic nuclei are made up of electrically charged proton and neutral neutrons. These items are held by the strong force, which is the greatest fundamental force that science has discovered.

To know more about nucleus visit:

https://brainly.com/question/17529078

#SPJ1

The number of ammonia molecules made when 6 grams of hydrogen gas reacts with excess nitrogen is 4 mol.

Given equation,

3H2(g) + N2(g) → 2NH3(g)

If N2 is present in excess, increase the provided moles H2 even by mole ratio of H2 to NH3 within balanced equation such that moles H2 cancel, producing moles NH3.

⇒               6 mol H2 × (2 mol NH3/3 mol H2)

     ⇒                        = 4 mol NH3.

A chemical equation is a representation of the a chemical reaction in the shape of a chemical formula with an arrow going from reactant to product, and a balanced chemical equation has the same amount of atoms on both sides of the equation. The rule of the conservation of mass guides the balancing of such a chemical equation in this case.

A chemical reaction is the process in which one or even more compounds, defined as reactants, are converted into one or more unique entities, known as products. Chemical elements as well as compounds are examples of substances. A chemical reaction rearranges the component atoms of the reactants to produce various products. In this situation, hydrogen and nitrogen combine to generate ammonia. The reaction described above is an example of the a combination reaction.

To know more about the Chemical equation, here

https://brainly.com/question/30087623

#SPJ4

Answer: His decision to add a fence to prevent his cows from straying will result in a long-term decline in the bobcat population. Most likely, the cows are being preyed upon by the bobcats when they stray and are fed in return. Because the cows are unable to cross a particular limit when the farmer constructs a fence, bobcats have less opportunity to hunt the cows.

Explanation:

Dispersion types include chromatic, material, waveguide, and polarisation mode dispersion.

To learn more about Dispersion refer to:

https://brainly.com/question/30215065

#SPJ1

Lattice enthalpy and hydration enthalpy both are always exothermic.

Lattice enthalpy is exothermic it involves the association of positively charged and negatively charged species. These species have an electrostatic forces of attraction to each other and can therefore released a lot of energy when bond is formed. [tex]Na^{+}[/tex] + [tex]Cl^{-}[/tex] → [tex]Na^{+}[/tex][tex]Cl^{-}[/tex]

Hydration enthalpy also exothermic in nature as water molecules surround the ions to form new forces of attraction. It depends upon ionic charge- greater the ionic charge stronger will be the ion-dipole interactions which is formed between the ions in the ionic lattice as well as water molecules.

[tex]M^{+}[/tex](g) + aq → [tex]M^{+}[/tex][tex]_{(aq)}[/tex]

To know more about exothermic here

https://brainly.com/question/4345448

#SPJ4

Power being decentralized to a local subsidiary could make it challenging to transfer knowledge from one company to another. Global corporations, in contrast to multidomestic firms: Atomic mass

The quantity of protons and neutrons in a specific element's nucleus, known as its atomic mass, determines the element's chemical composition. The number of protons in the nucleus of an element is typically expressed as its atomic number. It is a measure of an element's average weight. The number of protons in the atom's nucleus as a whole.

The quantity of protons in an atom is known as its atomic number. It is known as the proton number for this reason. It is represented in calculations by the capital letter Z. The word "Z" is derived from the German word "zahl," which meaning "number of numerals" or "atom zahl," a more contemporary term that denotes an atomic number.

To know more about atomic number visit:

https://brainly.com/question/8834373

#SPJ4

Lithium is a particularly reactive metal with a substantially higher storage density than lead batteries. Carbon and lightweight lithium are used to create the electrodes in lithium batteries.

These ions reach the anode during battery recharge. lithium batteries are significantly lighter. Thus, three Li+ ions are equivalent to one Al+3 ion. As a result, the energy storage capacity is increased by three units of charge provided by ions. Rechargeable batteries made of aluminum are inexpensive and have low flammability. Because aluminum is inert, it is safe to use and simple to use in a natural setting. Since aluminum has a higher volumetric capacity than lithium, it can store more energy per unit of volume. An electrochemical cell is one in which a chemical reaction aids in the generation of an electric current. Electricity is used in an electrolytic cell to carry out the chemical reaction that is not spontaneous. While no initiation is required for a spontaneous reaction.

To know more about batteries on

https://brainly.com/question/13651147

Answer:Fe₃O₄

Explanation:It contains 3 molecules of Iron and 4 molecules of Oxygen and that makes Magnetite.

By the use of rhetorical device, The speaker in "Eulogy of the Dog" uses both pathos and figurative language to make a powerful argument for the importance and loyalty of a dog's companionship.

The speaker evokes a strong emotional response from the audience by describing the unwavering loyalty and devotion of a dog to its master, even in the face of adversity and hardship.

The speaker describes the dog as "the one absolutely unselfish friend that man can have in this selfish world, the one that never deserts him, the one that never proves ungrateful or treacherous." This evokes a sense of sadness and empathy in the audience, as they are reminded of the potential betrayal and unfaithfulness of human relationships.

The speaker was said to have used figurative language to bring the argument to life and make it more relatable to the audience. The speaker describes the dog as "guards the sleep of his pauper master as if he were a prince" and "faithful and true even in death"

In all, the use of pathos and figurative language in the speech helps to create a powerful and emotional argument for the importance and loyalty of a dog's companionship.

The speaker is able to evoke feelings of empathy and sadness in the audience, while also making the abstract concept of loyalty more relatable and tangible.

Learn more about rhetorical device  from

https://brainly.com/question/1506566

#SPJ1

Answer: the other guy is correct I got a 90% on that question

Explanation:

The lewis structures for the molecule (CH₂NOH),  molecule (CH₃NH₂), and  molecule (CH₃CN) is attached below.

b. The bond order is 3.

c. CH₃NH₂

d. CH₃NH₂

The lewis structure are :

CH₂NOH

    H

     :     . .   . .        

H : C = N - O - H

                  °°

CH₃NH₂

    H

    |      ..

H - C - N - H

      |     |

      H    H

CH₃CN

   H

     |

H - C - C ≡ N :

      |

      H

B.  The bond order of the carbon- nitrogen bond in the N-methylidene hydroxylamine molecule is 2.

C. Species has the longest carbon-nitrogen bond is CH₃NH₂, methylamine.

D.  Species has the weakest carbon - nitrogen bond is CH₃NH₂, methylamine.

To learn more about lewis structure here

https://brainly.com/question/4144781

#SPJ4