I have no idea what to put, pls help, due tmr
(science)​

0.750 g of Al(OH)3 can consume approximately 1.04 g of HCl.

Also, approximately 0.514 grams of water would be produced in this reaction.

To determine the quantity of HCl consumed by 0.750 g of Al(OH)3, we need to consider the balanced chemical equation between Al(OH)3 and HCl.

The balanced equation is as follows:

2 Al(OH)3 + 6 HCl -> 2 AlCl3 + 6 H2O

From the balanced equation, we can see that 2 moles of Al(OH)3 react with 6 moles of HCl to produce 6 moles of water.

To calculate the quantity of HCl consumed, we need to convert the mass of Al(OH)3 to moles and then use the mole ratio between Al(OH)3 and HCl.

1. Calculate the number of moles of Al(OH)3:

  Moles = Mass / Molar mass

  Moles = 0.750 g / (26.98 g/mol + 3(16.00 g/mol))

  Moles = 0.750 g / 78.98 g/mol

  Moles ≈ 0.00949 mol

2. Use the mole ratio between Al(OH)3 and HCl (from the balanced equation) to determine the moles of HCl consumed:

  Moles of HCl = (0.00949 mol Al(OH)3) * (6 mol HCl / 2 mol Al(OH)3)

  Moles of HCl ≈ 0.0285 mol

3. Calculate the mass of HCl consumed:

  Mass = Moles * Molar mass

  Mass = 0.0285 mol * 36.46 g/mol

  Mass ≈ 1.04 g

Therefore, 0.750 g of Al(OH)3 can consume approximately 1.04 g of HCl.

Regarding the quantity of water produced, the balanced equation shows that 2 moles of Al(OH)3 react to produce 6 moles of water.

Since we have determined that 0.00949 mol of Al(OH)3 is consumed, the corresponding moles of water produced will be:

Moles of water = (0.00949 mol Al(OH)3) * (6 mol H2O / 2 mol Al(OH)3)

Moles of water ≈ 0.0285 mol

To calculate the quantity of water in grams, we multiply the moles by the molar mass of water:

Mass of water = Moles of water * Molar mass of water

Mass of water = 0.0285 mol * 18.02 g/mol

Mass of water ≈ 0.514 g

Therefore, approximately 0.514 grams of water would be produced in this reaction.

To know more about Molar mass refer here

https://brainly.com/question/12127540#

#SPJ11

Cobalt (II) fluoride will be less soluble than cobalt (II) chloride.

Solubility of a salt is influenced by several factors, including the nature of the ions involved and their relative sizes. In general, as the size of the anion increases, the solubility of the salt decreases. Similarly, as the size of the cation increases, the solubility of the salt also increases.

Comparing cobalt (II) fluoride with cobalt (II) chloride and cobalt (II) bromide, we can see that the fluoride ion (F⁻) is smaller than the chloride ion (Cl⁻) and bromide ion (Br⁻). This means that cobalt (II) fluoride has a higher lattice energy than cobalt (II) chloride and cobalt (II) bromide due to the stronger electrostatic attraction between the smaller fluoride ions and the cobalt (II) ions. This strong lattice energy makes cobalt (II) fluoride less soluble than cobalt (II) chloride and cobalt (II) bromide.

learn more about Solubility here:

https://brainly.com/question/31493083

#SPJ11

The standard entropy change for the reaction is ΔS° = 228.8 J/K·mol.

The standard entropy change, ΔS°, can be calculated using the following equation:

ΔS° = ΣS°(products) - ΣS°(reactants)

where ΣS° represents the sum of the standard entropies of the products or reactants, respectively.

Using the standard entropy values given:

ΔS° = [S°([tex]SO_3(g)[/tex]) + S°([tex]NO(g)[/tex])] - [S°([tex]SO_2(s)[/tex]) + S°([tex]NO_2(g)[/tex])]

ΔS° = [(256.2 J/K·mol) + (210.6 J/K·mol)] - [(248.5 J/K·mol) + (240.5 J/K·mol)]

ΔS° = 228.8 J/K·mol

For more question on standard entropy click on

https://brainly.com/question/30174483

#SPJ11

During an aldol condensation reaction, both addition and elimination reactions occur. Oxidation-reduction and substitution reactions are not involved in this process.

Aldol condensation reaction involves the addition and elimination of a carbonyl compound, usually an aldehyde or ketone, under basic or acidic conditions. The reaction starts with the nucleophilic addition of the enolate ion of the carbonyl compound to another carbonyl compound, forming a beta-hydroxy aldehyde or beta-hydroxy ketone intermediate. This intermediate then undergoes dehydration through the elimination of a water molecule, resulting in the formation of an alpha,beta-unsaturated aldehyde, or ketone.

Therefore, aldol condensation is mainly an addition-elimination reaction, and there is no oxidation-reduction or substitution occurring during this process. In summary, a detailed and long answer would be that aldol condensation is a reaction where a carbonyl compound undergoes nucleophilic addition with another carbonyl compound under basic or acidic conditions, forming a beta-hydroxy aldehyde or beta-hydroxy ketone intermediate. This intermediate then undergoes dehydration, leading to the formation of an alpha,beta-unsaturated aldehyde, or ketone. There is no oxidation-reduction or substitution occurring during this process.

An aldol condensation reaction involves two main steps:
1. The addition of an enolate ion (generated from a carbonyl compound) to another carbonyl compound, forming a beta-hydroxy carbonyl compound (aldol).
2. Dehydration of the aldol, which is an elimination reaction, results in an alpha-beta unsaturated carbonyl compound.

So, during an aldol condensation reaction, both addition and elimination reactions occur. Oxidation-reduction and substitution reactions are not involved in this process.

Learn more about aldol reaction

https://brainly.com/question/28984750

#SPJ11

Answer:

Yes it increase the Rate of chemical reaction

Removing H2 - Decrease rate; Adding N2 - Increase rate; Adding a catalyst - Increase rate; Lowering temperature - Decrease rate; Raising temperature - Increase rate.

1. Removing H2: Decrease rate. This reaction is a synthesis reaction, which means that the reactants are combining to form a product. If one of the reactants is removed, there are fewer particles available to react, which means the rate of reaction will decrease.

2. Adding N2: No change. The balanced equation shows that there is already enough N2 present to react with the available H2. Adding more N2 will not increase the rate of reaction.

3. Adding a catalyst: Increase rate. A catalyst is a substance that speeds up the rate of a reaction without being consumed in the reaction itself. In this case, a catalyst would provide an alternative pathway for the reaction to occur, which would lower the activation energy required for the reaction to take place. This would increase the rate of reaction.

4. Lowering temperature: Decrease rate. This reaction is exothermic, which means it releases heat. According to the Arrhenius equation, as temperature decreases, the rate of reaction decreases as well. Lowering the temperature would therefore decrease the rate of reaction.

5. Raising temperature: Increase rate. As mentioned above, the Arrhenius equation states that increasing temperature increases the rate of reaction. This is because the increased kinetic energy of the particles leads to more frequent and energetic collisions between particles, which increases the likelihood of successful collisions and therefore increases the rate of reaction.

To learn more about rate of reaction visit:

brainly.com/question/30546888

#SPJ11

If the rate constant for a certain reaction is 5.10 x 103 s, and the initial reactant concentration was 0.550 M, then the concentration after 12.0 minutes will be approximately 0.014 M (option d).

To solve this problem, we need to use the first-order rate law equation:

ln([A]t/[A]0) = -kt

where [A]t is the concentration of reactant at time t, [A]0 is the initial concentration of reactant, k is the rate constant, and t is time.

We can rearrange this equation to solve for [A]t:

[A]t = [A]0 * e^(-kt)

Substituting the given values, we get:

[A]t = 0.550 M * e^(-5.10 x 10^3 s^-1 * 12.0 min * 60 s/min)

[A]t = 0.014 M

Therefore, the concentration of reactant after 12.0 minutes is d. 0.014 M.

It's important to note that the rate constant is a constant value that is specific to a particular reaction at a given temperature and pressure.

The concentration of reactants, on the other hand, can vary over time as the reaction proceeds. The rate constant is used to calculate the rate of the reaction at any given time, while the concentration of reactants is used to determine how much of the reactants are left at a particular time.

Learn more about rate constant at: https://brainly.com/question/29511879

#SPJ11

Answer:

1.46 M

Explanation:

M = mol ÷ Liters

26.489 / 46 = .576 mol of ethanol

density of water is 1g/ml, so the amount of liters of water (L) is 395 ÷ 1000 = .395 Liters

.576 ÷ .395 = 1.46 M

5.91 mL of 0.550 M HI(aq) are needed to react with 15.00 mL of 0.217 M KOH(aq).

The balanced chemical equation for the reaction between HI(aq) and KOH(aq) is: HI(aq) + KOH(aq) → KI(aq) + H₂O(l) According to the equation, the stoichiometry of the reaction is 1:1 between HI and KOH.

This means that 1 mole of HI reacts with 1 mole of KOH. To determine how many milliliters of 0.550 M HI(aq) are needed to react with 15.00 mL of 0.217 M KOH(aq), we need to use the equation: M₁V₁ = M₂V₂

where M₁ and V₁ are the concentration and volume of the HI(aq) solution, and M₂ and V₂ are the concentration and volume of the KOH(aq) solution, respectively. Rearranging the equation to solve for V₁, we get: V₁ = (M₂V₂)/M₁

Substituting the given values, we get:

V₁ = (0.217 mol/L × 0.01500 L)/0.550 mol/L.

V₁ ≈ 0.00591 L or 5.91 mL.

To know more about stoichiometry, refer here:

https://brainly.com/question/28780091#

#SPJ11

The spectator ions in a neutralization reaction involving this weak acid (HBrO2) and sodium hydroxide (NaOH) is Na+(aq) and BrO2-(aq).

The neutralization reaction between HBrO2 and NaOH can be represented as follows:

HBrO2  +  NaOH   →   NaBrO2   +  H2O

The complete ionic reaction is

H+BrO2-   +   Na+OH-   →   Na+BrO2-   +  H2O

The net ionic reaction is

H+    +   OH-    →       H2O

In this reaction, Na+ and OH- are the ions that combine to form NaOH and they are called the spectator ions because they do not participate in the formation of the products.

Therefore, the answer is option B. Na+(aq) and BrO2-(aq).

To know more about the spectator ions, click below.

https://brainly.com/question/15053039

#SPJ11

6.8 moles of nitrogen are required to make 3.4 moles of Ca(NO₂)₂ due to the 2:1 molar ratio of nitrogen to Ca(NO₂)₂.

To determine the number of moles of nitrogen required to make 3.4 moles of Ca(NO₂)₂, we need to first determine the molar ratio of nitrogen to Ca(NO₂)₂.

From the formula of Ca(NO₂)₂, we can see that there are 2 moles of NO₂ for every 1 mole of Ca(NO₂)₂. Since each NO₂ molecule contains one nitrogen atom, there are also 2 moles of nitrogen for every 1 mole of Ca(NO₂)₂.

Therefore, to make 3.4 moles of Ca(NO₂)₂, we would need 2 × 3.4 = 6.8 moles of nitrogen.

To know more about the molar ratio refer here :

https://brainly.com/question/1792057#

#SPJ11

Yes, liquid will be present. The mass of the liquid present will be 1498.85 g.

The density of water is approximately 1 g/mL or 1 g/cm³. Therefore, 1.15 g of water has a volume of 1.15 mL or 0.00115 L. Since the container has a volume of 1.5 L, there is still space for more liquid.

The container has a volume of 1.5 L, which is equivalent to 1500 mL or 1500 cm³. The volume of the water is 1.15 mL or 1.15 cm³. Therefore, the remaining volume of the container is 1498.85 mL or 1498.85 cm³.

Assuming that the container is completely filled with liquid, we can use the density of water to calculate the mass of liquid present.

Density = mass/volume

1 g/cm³ = mass/1498.85 cm³

mass = 1498.85 g

To learn more about density visit:

brainly.com/question/29775886

#SPJ11

The minimum uncertainty in the position of an electron moving at a speed of 4 x 10⁶ m/s is approximately 1.4 x 10⁻⁷ meters.

The minimum uncertainty in the position of an electron moving at a speed of 4 x 10⁶  m/s can be calculated using the Heisenberg uncertainty principle, which states that the product of the uncertainty in position and the uncertainty in momentum must be greater than or equal to Planck's constant divided by 4π.

Δx * Δp ≥ h/4π

Where Δx is the uncertainty in position, Δp is the uncertainty in momentum, and h is Planck's constant.

The momentum of an electron is given by the product of its mass and velocity, which is approximately 9.11 x 10⁻³¹ kg x 4 x 10⁶ m/s = 3.64 x 10⁻²⁴kg m/s.

Using this value and Planck's constant (h = 6.626 x 10⁻³⁴J s), we can solve for the minimum uncertainty in position:
Δx * 3.64 x 10⁻²⁴ kg m/s ≥ 6.626 x 10⁻³⁴ Js/ 4π
Δx ≥ (6.626 x 10⁻³⁴Js/4π) / (3.64 x 10⁻²⁴ kg m/s)
Δx ≥ 1.4 x 10⁻⁷ meters

Therefore, the minimum uncertainty in the position of an electron moving is 1.4 x 10^-7 meters.

Complete question:

What is the minimum uncertainty in the position of an electron moving at a speed of 4 times 10^6 m /s?

Learn more about Heisenberg's uncertainty at https://brainly.com/question/16941142

#SPJ11

In the type of hybridization known as sp³ hybridization, the angle between the hybrid orbitals is 109.5 degrees. In this hybridization, one s orbital and three p orbitals combine to form four equivalent sp³ hybrid orbitals, which are arranged in a tetrahedral geometry around the central atom, resulting in bond angles of approximately 109.5 degrees.

In sp³ hybridization, one s orbital and three p orbitals of the central atom combine to form four hybrid orbitals that are arranged in a tetrahedral shape. In order for an atom to be sp³ hybridized, it must have an s orbital and three p orbital. These hybrid orbitals are used to form bonds with other atoms or groups of atoms. Examples of molecules that exhibit sp³ hybridization include methane (CH₄), ethane (C₂H₆), and ammonia (NH₃).

for more questions on hybridization: https://brainly.com/question/19538722

#SPJ11

When determining the concentration of an unknown sulfuric acid solution, a titration can be performed with a known concentration of sodium hydroxide.

Here are some additional details that may be helpful in understanding the process of titration:

The titration involves adding small amounts of the sodium hydroxide solution to the sulfuric acid solution until the reaction between the two is complete, which is indicated by a change in color of the indicator used. The volume of the sodium hydroxide solution used in the reaction can then be used to calculate the concentration of the sulfuric acid solution.

Learn More About sulfuric acid

https://brainly.com/question/10220770

#SPJ11

The amount of Hydrogen Fluoride that can be form from the given reaction is 22.08 g.

The balanced chemical reaction is given as,

5F₂ (g)  +  2NH₃ (g)  -->  N₂F₄ (g)  +  6HF (g)

According to the stoichiometry of the reaction

5 moles of F₂ reacts with 2 moles of NH₃

Given,

Mass of NH₃ = 42 g

=> Moles of NH₃ = 42 / 17 = 2.75 moles

Mass of F₂ = 35 g

=> Moles of F₂ = 35 / 38 = 0.92 moles

5 moles of F₂ reacts with 2 moles of NH₃

=> 1 mole of F₂ reacts with 2/5 = 0.4 moles of NH₃

=> 0.92 moles of F₂ reacts with 0.4 x 0.92 = 0.368 moles of NH₃

We see form the above calculations that NH₃ is present in excess of 2.75 - 0.368 = 2.38 moles

Hence F₂ is the limiting reagent of the reaction

From the stoichiometry 5 moles of F₂ reacts to produce 6 moles of HF

Hence,

0.92 moles of F₂ reacts to produce 0.92 x 6 / 5 = 1.104 moles of HF

=> Moles of HF produced = 1.104

=> Mass of HF = 1.104 x 20 = 22.08 g

Learn more about Mass from the link given below.

https://brainly.com/question/19694949

#SPJ4

The combustion of 0.30 g of methane produces -16.02 kJ of heat.

The given enthalpy change for the reaction is -890 kJ.

To calculate the amount of heat produced by the combustion of 0.30 g of methane, we need to first calculate the moles of methane used in the reaction;

1 mol CH₄(g) = 16.04 g

0.30 g CH₄(g) = 0.30/16.04 mol CH₄(g)

= 0.018 mol CH₄(g)

From the balanced chemical equation, we know that 1 mole of CH4(g) produces -890 kJ of heat. Therefore, the amount of heat produced by the combustion of 0.018 mol of CH₄(g) can be calculated as;

q = -890 kJ/mol × 0.018 mol

q = -16.02 kJ

Therefore, the combustion of 0.30 g of methane produces -16.02 kJ of heat. Note that the negative sign indicates that the reaction is exothermic and releases heat to the surroundings.

To know more about enthalpy change here

https://brainly.com/question/29556033

#SPJ4

--The given question is incorrect, the correct question is

"Consider the reaction: CH₄(g) 2O₂ (g) → CO₂(g) 2H₂O(l) \deltaδh = -890 kj. Calculate the amount of heat (q) produced by the combustion of 0.30 g of methane."--

To solve for the change in entropy, we can use the equation:

ΔS = nS°(products) - mS°(reactants)

where:

- ΔS is the change in entropy

- n and m are the stoichiometric coefficients of the products and reactants, respectively

- S° is the standard molar entropy of the substance

First, we need to write the balanced chemical equation for the combustion of silicon:

Si + O2 -> SiO2

From the equation, we can see that the stoichiometric coefficient of silicon is 1. Therefore, n = 1.

Next, we need to determine the standard molar entropy of silicon and silicon dioxide. According to standard tables, the values are:

S°(Si) = 18.8 J/(mol K)

S°(SiO2) = 41.8 J/(mol K)

Now we can substitute the values into the equation:

ΔS = nS°(SiO2) - mS°(Si)

Since all the silicon is consumed, m = 0.802 g / (28.09 g/mol) = 0.0286 mol.

ΔS = 1(41.8 J/(mol K)) - 0.0286 mol(18.8 J/(mol K))

ΔS = 0.919 J/K

Therefore, the change in entropy when 0.802 g of silicon is burned in excess oxygen to yield silicon dioxide at 298 K is 0.919 J/K.

To know more about entropy refer here

https://brainly.com/question/13135498#

#SPJ11

In the t-test, the sample standard deviation (s) is used to estimate the population standard deviation (σ) is true, because the population standard deviation is generally unknown and must be estimated from the sample data.

The t-test is a statistical hypothesis test that is used to determine whether there is a significant difference between the means of two groups. It is often used when the sample size is small and the population standard deviation is unknown. The t-statistic is calculated as the difference between the sample means divided by the standard error of the difference, which is calculated using the sample standard deviations and the sample sizes. The t-statistic is compared to a t-distribution with degrees of freedom equal to the sum of the sample sizes minus two, and the p-value is calculated based on the probability of observing a t-value as extreme as the calculated t-value assuming the null hypothesis is true.

Learn more about t-test: https://brainly.com/question/15870238

#SPJ11

1a) The IUPAC name for the following compound is 3-ethyl-4-methylhexane.

1b) The IUPAC name for the following compound is 2-chloro-3-methylpentane.

2) The most stable conformation of 2,2-dimethylbutane is the anti-periplanar conformation.

3) The isomer of C7H16 that contains an ethyl branch on the parent chain is 2-ethylhexane.

Explanations to the above written short answers are provided below,

1a) The parent chain contains six carbons, and the substituents are located at positions 3 and 4, respectively. The substituent at position 3 is an ethyl group (two carbons), and the substituent at position 4 is a methyl group (one carbon).

1b) The parent chain contains five carbons, and the substituents are located at positions 2 and 3, respectively. The substituent at position 2 is a chloro group, and the substituent at position 3 is a methyl group.

2) This has a staggered arrangement with a dihedral angle of 180 degrees between the two methyl groups.

3) The parent chain contains six carbons, and the ethyl group (two carbons) is attached to the second carbon. The remaining four carbons are arranged in a linear chain, with three methyl groups attached at positions 3, 4, and 5.

To know more about "IUPAC" refer here:

https://brainly.com/question/26757517#

#SPJ11

The most likely event to occur as a result of a prominence on the Sun is option 2: The auroras would become visible.

A prominence is a large, bright, and relatively cool plasma structure that extends outward from the Sun's surface into the corona. It is associated with magnetic fields and is often observed as a loop or curtain-like structure. When a prominence erupts or releases material, it can lead to the formation of a coronal mass ejection (CME). Coronal mass ejections are large bursts of plasma and magnetic fields from the Sun that can travel through space. When a CME interacts with Earth's magnetosphere, it can cause geomagnetic storms. These storms can trigger the phenomenon known as the auroras, which are displays of colorful lights in the Earth's polar regions. As the CME and its associated magnetic fields interact with Earth's magnetosphere, they can cause the charged particles in the atmosphere to emit light, leading to the formation of auroras. The auroras are typically seen in high-latitude regions such as the Arctic (Northern Lights) and Antarctic (Southern Lights). Therefore, when a prominence leads to a CME and subsequent interaction with Earth's magnetosphere, it is most likely that the auroras would become visible as a result of this solar event.

Learn more about magnetic field here:

https://brainly.com/question/30331791

#SPJ11

The activity of a radioactive sample decays exponentially with time, and the half-life is the time it takes for the activity to decrease to half of its original value.

If the half-life of a radioactive element is T years, it will take 2T years for the activity to decrease to 25% of its original value, 3T years to decrease to 12.5% of its original value, and so on.

To calculate how many years it will take for the activity to decrease to a certain percentage of the original value, one can use the formula A=A0(0.5)^(t/T), where A is the activity at time t, A0 is the initial activity, and T is the half-life. Solving for t, we get t = T log₂ (A0/A), where log₂ is the logarithm to the base 2.

To know more about the half-life refer here :

https://brainly.com/question/24710827#

#SPJ11

The predominant intermolecular force in [tex]NH_{3}[/tex] (ammonia) is hydrogen bonding.

This is because [tex]NH_{3}[/tex] contains a hydrogen atom bonded to a highly electronegative nitrogen atom, resulting in a highly polar molecule.

Hydrogen bonding occurs between a hydrogen atom in a polar molecule and a highly electronegative atom (in this case, the nitrogen atom in another [tex]NH_{3}[/tex] molecule).

This type of intermolecular force is stronger than the other two main types of intermolecular forces, which are London dispersion forces and dipole-dipole interactions.

Bromine ([tex]Br_{2}[/tex]) and iodine ([tex]I_{2}[/tex]) are both nonpolar molecules and only have London dispersion forces between them.

To know more about intermolecular force, refer here:

https://brainly.com/question/9007693#

#SPJ11

Concentrated sodium hydroxide (NaOH) must be treated with caution because it is a highly corrosive and caustic substance. Proper protective equipment includes chemical-resistant gloves and safety goggles.

Handling concentrated sodium hydroxide requires strict safety measures due to its potential to cause severe burns and damage to the skin, eyes, and respiratory system. In addition to chemical-resistant gloves and safety goggles, other protective equipment such as a lab coat, closed-toe shoes, and even a face shield can be used to minimize the risk of exposure. In case of accidental contact, it is crucial to have an eyewash station and safety shower nearby to quickly rinse off any NaOH that comes into contact with the skin or eyes.

Furthermore, it is essential to work in a well-ventilated area to prevent the inhalation of harmful fumes, and proper storage guidelines must be followed. Sodium hydroxide should be stored in a tightly sealed, labeled container, away from any acidic or flammable materials. Lastly, it is important to be knowledgeable about emergency procedures and first-aid measures to handle any potential accidents or incidents involving concentrated NaOH.

Know more about Concentrated sodium hydroxide here:

https://brainly.com/question/28612681

#SPJ11

The pH of a solution can be related to the concentration of H+ ions and the dissociation constant of the acid (Ka) by the following equation:

pH = pKa + log([A-]/[HA])

where [A-] is the concentration of the conjugate base of the acid, and [HA] is the concentration of the acid.In this case, the acid is hypobromous acid, HBrO, and its conjugate base is the hypobromite ion, BrO-. The chemical equation for the dissociation of HBrO is:

HBrO(aq) ⇌ H+(aq) + BrO-(aq)

The equilibrium constant expression for this reaction is:

Ka = [H+(aq)][BrO-(aq)]/[HBrO(aq)]

We are given the concentration of HBrO and the pH of the solution, so we can calculate [H+(aq)]:

pH = -log[H+(aq)]

10^-pH = [H+(aq)]

10^-4.96 = [H+(aq)] = 7.94 × 10^-5 M

Since HBrO and BrO- are in a 1:1 ratio at equilibrium, [BrO-(aq)] is also 7.94 × 10^-5 M. Substituting these values in the equilibrium constant expression, we get:

Ka = [H+(aq)][BrO-(aq)]/[HBrO(aq)] = (7.94 × 10^-5)^2 / (0.060 - 7.94 × 10^-5) ≈ 2.6 × 10^-9

Therefore, the value of Ka for hypobromous acid is approximately 2.6 × 10^-9.

To know more about concentration refer here

https://brainly.com/question/10725862#

#SPJ11

The final pH of the solution is 5.00.

First, we need to write the balanced chemical equation for the reaction between the weak acid (HA) and the strong base (NaOH):

HA + NaOH → NaA + H2O

where NaA is the sodium salt of the weak acid.

Since 0.500 mol of NaOH is added to 1.00 mol of HA, the amount of HA remaining after the reaction is (1.00 - 0.500) = 0.500 mol.

To calculate the pH of the solution, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where [A-] is the concentration of the conjugate base (NaA) and [HA] is the concentration of the weak acid (HA).

We can find [A-] by multiplying the amount of NaOH added (0.500 mol) by the stoichiometric coefficient ratio of NaA to NaOH (1:1), and then dividing by the total volume of the solution (1.00 L):

[A-] = (0.500 mol NaOH) / (1.00 L) = 0.500 M

To find [HA], we need to use the initial molarity of the acid (1.00 M) minus the amount of acid that reacted with NaOH (0.500 mol), divided by the total volume of the solution (1.00 L):

[HA] = (1.00 mol HA - 0.500 mol NaOH) / (1.00 L) = 0.500 M

Now we can plug in the values for pKa, [A-], and [HA] to solve for pH:

pH = 5.00 + log(0.500/0.500) = 5.00

Therefore, the final pH of the solution is 5.00.

To learn more about molarity, refer below:

https://brainly.com/question/8732513

#SPJ11

In a variational calculation of the hydrogen atom, a Gaussian function with one adjustable parameter can be used as a trial function.

The Gaussian function is a commonly used mathematical function that has a bell-shaped curve, which can be adjusted by changing the value of the parameter.

By using this function as a trial function, we can approximate the wavefunction of the hydrogen atom and calculate its energy using the variational principle.

The variational principle states that the energy of any approximate wavefunction will always be greater than or equal to the true energy of the system.

By minimizing the energy of the Gaussian function with respect to its adjustable parameter, we can obtain an estimate of the ground state energy of the hydrogen atom.

To know more about Gaussian function, refer here:

https://brainly.com/question/31002596#

#SPJ11

The molarity of 0.500 mol of Na₂S in 1.30 L of solution is 0.385 M.

To calculate the molarity, we need to divide the number of moles of Na₂S by the volume of the solution in liters. So, molarity = moles of solute ÷ volume of solution in liters.
Given, moles of Na₂S = 0.500 mol and volume of solution = 1.30 L.
Therefore, molarity = 0.500 mol ÷ 1.30 L = 0.385 M.
This means that there are 0.385 moles of Na₂S in every liter of the solution.

Molarity is an important unit of concentration and is used to describe the amount of solute in a given volume of solution. In this case, we can say that the Na₂S solution is relatively dilute, as it has a molarity of less than 1.0 M.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ11

The correct answer is:

B. The light is getting bigger when it's waxing and smaller when it's waning.

Waxing and waning are terms used to describe the changing appearance of the Moon's illuminated portion as seen from Earth.

Waxing refers to the phase of the Moon when the illuminated area is increasing, starting from a New Moon and progressing towards a Full Moon. During the waxing phase, the Moon appears to grow larger and brighter.

Waning, on the other hand, refers to the phase of the Moon when the illuminated area is decreasing, starting from a Full Moon and progressing towards a New Moon. During the waning phase, the Moon appears to shrink in size and become less bright.

Therefore, the key difference between waxing and waning lies in the direction of change in the illuminated portion of the Moon. Waxing means the illuminated area is getting larger, while waning means the illuminated area is getting smaller.

to learn more about moon click here:brainly.com/question/30653068

#SPJ 11

To prepare a 0.15 M solution using a 50 mL volumetric flask, the student needs to dissolve 0.15 moles of the salt in the flask. To find the mass of the salt needed, we can use the formula:
mass = moles x molar mass

So, mass = 0.15 moles x 20.163 g/mol = 3.02445 g
Therefore, the student should dissolve 3.02445 grams of the salt to prepare a 0.15 M solution in a 50 mL volumetric flask.To prepare a 0.15 M solution of the salt (molar mass = 20.163 g/mol) in a 50 mL volumetric flask, the student should dissolve:

grams of salt = (0.15 mol/L) x (20.163 g/mol) x (0.050 L) = 0.15195 g
The student should dissolve approximately 0.15195 grams of the salt.

To know more about volumetric flask visit-

https://brainly.com/question/15289714

#SPJ11

There are approximately 0.1229 moles of strontium phosphate in 55.50 grams of the compound.

To determine the number of moles of strontium phosphate [tex](Sr_3(PO_4)_2)[/tex] in 55.50 grams, we need to use the concept of molar mass and Avogadro's number.  First, we calculate the molar mass of strontium phosphate by summing up the atomic masses of each element present in the compound. Strontium (Sr) has an atomic mass of approximately 87.62 grams/mol, phosphorus (P) has an atomic mass of approximately 30.97 grams/mol, and oxygen (O) has an atomic mass of approximately 16.00 grams/mol.  So, the molar mass of strontium phosphate is:

3(Sr) + 2([tex](PO_4)[/tex]) = 3(87.62) + 2(30.97 + 4(16.00)) = 261.86 + 2(30.97 + 64.00) = 261.86 + 2(94.97) = 261.86 + 189.94 = 451.80 grams/mol

Next, we use the formula:

moles = mass / molar mass

Plugging in the given mass of 55.50 grams and the molar mass of 451.80 grams/mol:

moles = 55.50 g / 451.80 g/mol ≈ 0.1229 mol

Learn more about  molar mass here:

https://brainly.com/question/30640134

#SPJ11