A. radio signal. Radio waves have a longer wavelength and travel at the speed of light, the same as visible light. However, they have a lower frequency and can penetrate cosmic dust more easily.
both would reach Earth at the same time. Both visible light and radio signals travel at the speed of light, which is the fastest speed possible in the universe. Therefore, if emitted simultaneously from Alpha Centauri, both signals would cover the vast distance and reach Earth at the same time. The speed of light is constant regardless of the wavelength or frequency of the electromagnetic wave. Hence, there would be no significant time difference between the arrival of the radio signal and the visible light signal from Alpha Centauri.
learn more about frequency here:
https://brainly.com/question/31938473
#SPJ11
what behavior is mostly strongly associated with introversion in a personality.
Answer:
Need quiet to concentrate
Are reflective
Are self-aware
Take time making decisions
Feel comfortable being alone
Don’t like group work
Prefer to write rather than talk
And maybe even feel tired after being in a crowd
Explanation:
A man pushes a box across a floor. as he increases the force he applies horizontally to the box
a) the kinetic friction decreases
b) the kinetic friction may increase or decrease depending on the velocity of the box
c) the kinetic friction remains the same
d) the kinetic friction increases
When a man pushes a box across a floor, as he increases the force he applies horizontally to the box, then the kinetic friction remains the same.
To find the answer, we need to know about friction.
What is friction?Whenever a body moves, over the surface of another body, a force comes into play which acts parallel to the surface of contact and opposes the relative motion. This opposing force is called friction.There are two frictions acting on a surface.Static friction: It come into play between two bodies before when it starts moving. Self-adjusting force and the max value of it is called limiting static friction.Kinetic friction: It come into play between two bodies when it starts moving. It is not a self-adjusting force.As we increase applied force, kinetic friction will remain same.Thus, we can conclude that, kinetic friction remains the same when we increase the applied force.
Learn more about the friction here:
https://brainly.com/question/28048527
#SPJ1
As a guy pushes a box across a floor, the kinetic friction stays constant no matter how much force is applied on the box horizontally.
We must understand friction if we are to find the solution.
Describe friction?A force that works parallel to the surface of contact and opposes the relative motion is always present whenever a body moves over the surface of another body. Friction is the name for this opposing force.On a surface, there are two frictions operating.Static friction: It occurs between two bodies before motion is initiated. Limiting static friction is the term used to describe the maximum amount of self-adjusting force.As soon as two bodies begin to move, kinetic friction is triggered. It is not a force that adjusts itself.The amount of kinetic friction will not change when we apply more force.We can therefore draw the conclusion that kinetic friction does not change as the applied force is increased.
Learn more about the friction here:
brainly.com/question/28048527
#SPJ1
Why do we tallk about radio waves as a group and not the frequeny of radio waves
Some fish have a density slightly less than that of water and must exert a force (swim) to stay submerged. What force must an 85.0-kg grouper exert to stay submerged in salt water if its body density is
The force require to keep grouper submerged is 8.207N.
According to Archimedes principle buoyant force of any object must equal to weight of fluid it displaced.
The expression for the force exerted to stay submerged in salt water is
F = F(b) - w(fish)
where F(b) = buoyant force
w(fish) = weight
now substitute w(b) for F(b)
→ F = Vρg - w(fish)
where V = volume of sea water
ρ = density of sea water
Now by Archimedes principle V = m(fish) / ρ(fish)
→ F = (m(fish) / ρ (fish) ) ρg - m(fish)g
F = (85 kg/1015 kg-m^-3) (1.025× 10³ kg-m^-3) (9.8 m/s^2)
- (85kg) × 9.8 m/s^2
F = 841.207N - 833N
F = 8.207 N
Hence, the force require to keep grouper submerged is 8.207N.
Learn more about Archimedes Principle here:
https://brainly.com/question/15076878
#SPJ4
A proton exits the cyclotron 1. 0 ms after starting its spiral trajectory in the center of the cyclotron. How many orbits does the proton complete during this 1. 0 ms ?.
(a) The diameter of the largest orbit just before the protons exit the cyclotron is 39 cm.
(b) The number of orbits completed by the proton during this 1.0 ms is 14000 revolutions.
What is kinetic energy?
The kinetic energy of an object is the energy that it possesses due to its motion.
It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity.
Formula of KE:
K.E = 1/2mv²
mv² = 2 K.E
v = sqrt( 2*KE / M)
Here,
(a)
The KE of the medical isotopes = 6.5 MeV
substituting the values,
v = sqrt( 2* 6.5* 1.6* 10^-13 / 1.67* 10^-27 )
v = 3.53 × 10⁷ m/s
Now the centripetal force:
mv² / R = qvB
r = q*v / mv²
r = ( 1.67* 10^-27 * 3.53 × 10⁷ ) / ( 1.9* 1.6* 10^-19 )
r = 0.19415 m
diameter d = 2r,
d= 2(0.19415 m)
d= 0.39 m ≅ 39 cm
(b)
The time period to complete a revolution around the spiral trajectory is:
T = 2πr / v
T = 2*3.14* 0.1941 / 3.53*10^7
T = 0.7 × 10⁻⁷ s
Thus, the number of orbits that the proton does to complete the revolution in 1 ms is:
n = t / T
n = 10^-3 / (0.7*10^-7)
n = 14285.71 ≅ 14000 revolutions
Learn more about spiral trajectory here:
https://brainly.com/question/8861443
#SPJ4
Your question is incomplete, but most probably full question was:
A medical cyclotron used in the production of medical isotopes accelerates protons to 6.5 MeV. The magnetic field in the cyclotron is 1.9 T.
(a) What is the diameter of the largest orbit, just before the protons exit the cyclotron? Express your answer with the appropriate units. d = 57 cm Previous
(b) A proton exits the cyclotron 1.0 ms after starting its spiral trajectory in the center of the cyclotron. How many orbits does the proton complete during this 1.0 ms?
Car A is traveling with a constant speed of 80 km>h due north, while car B is traveling with a constant speed of 100 km>h due east. Determine the velocity of car B relative to car A
Answer:
80J
Explanation:
K.E = ½ mv²
k.e = ½ * 80*
100²
ke= 4*20
ke= 80 J
In order to use the efficiency of a car engine in an optimal way, a maximum engine speed of .........rpm for shifting is recommended for gas engines.
In order to use the efficiency of a car engine in an optimal way, a maximum engine speed of 2,500 rpm for shifting is recommended for gas engines.
The maximum thermal efficiency of modern gasoline engines is over 50%, but legal cars on the road are only about 20% to 35% when used to power cars.
Unfortunately, even with regular car maintenance such as tuning and oil changes, the efficiency of today's gasoline engines is about 30-35%. In other words, about 65 cents per dollar spent on gasoline is wasted.
EPA's 2020 Automotive Trend Report preliminary data shows that the average fuel economy of 2020 model light trucks has increased to 25.7 miles per gallon (MPG). If this preliminary data holds, it will mark the highest average fuel economy ever for a new light commercial vehicle.
Learn more about the efficiency of a car engine here:https://brainly.com/question/11775858
#SPJ4
Two large parallel conducting plates are 9.0 cm apart and carry equal but opposite charges on their facing surfaces. The magnitude of the surface charge density on either of the facing surfaces is 3.7 nC/m 2. Determine the magnitude of the electric potential difference between the plates.
The magnitude of the electric potential difference between the plates is 37.63 V.
Given:
Distance between the plates, d = 9 cm
Surface charge density, ρ = 3.7 nC/m² = 3.7 × 10⁻⁹ C/m²
Calculation:
For two parallel plate conductors, the electric field is given as:
E = ρ/ε₀
where ρ is the charge density
ε₀ is the permeability of free space
Applying values in the above equation we get:
E = ( 3.7 × 10⁻⁹ C/m²)/(8.85 × 10⁻¹² C²/m)
= 418.08 V/m
Now, the potential difference between the plates separated by a distance 'd' is given as:
ΔV = Ed
where E is the electric field
d is the distance of separation between the plates
Applying values in the above equation we get:
ΔV = (418.08 V/m) × (0.09 m)
= 37.63 V
Therefore, the magnitude of the electric potential difference between the plates is 37.63 V.
Learn more about electric potential difference here:
https://brainly.com/question/13296426
#SPJ4
A car approaches a stationary police car at 36 m/s. The frequency of the siren (as heard in the police car) is 500 Hz. What is the frequency (in Hz) heard by an observer in the moving car as he approaches the police car
The frequency heard by an observer in the moving car as he approaches the police car is 558.6 Hz.
Frequency hear by the observerThe frequency heard by the observer is calculated by applying the principle of Doppler effect.
f₀ = f'[(v/v - vs)]
where;
f₀ is the observed frequencyv is speed of sound = 343 m/svs is the speed of the sourcef₀ = 500[(343 / 343 - 36)]
f₀ = 500(343/307)
f₀ = 558.6 Hz
Thus, the frequency heard by an observer in the moving car as he approaches the police car is 558.6 Hz.
Learn more about frequency here: https://brainly.com/question/10728818
#SPJ1
Complete the following nuclear reaction:
Answer choice
a) γ
b) α
c) β–
d) p
The particle that was given off in the reaction beta rays is β–. Option C
What is a nuclear reaction?A nuclear reaction will involve the change in the nucleus of an atom. It often leads to the production of new nucleus. As we can see the equation, there was a transformation from nitrogen nucleus to oxygen atom.
Thus, the particle that was given off in the reaction beta rays is β–. The fact that the mass number remained the same but the atomic number increased by one unit from left to right implies that a beta decay has occurred.
Learn more about beta rays:https://brainly.com/question/2088794
#SPJ1
question down below need rply fast
The resultant magnitude and direction of the vectors are as follows:
A. A = 6.6; θ = 30.8° from the x-axisB. B = 10.4; θ = 196.7° from the x-axisC. C = 23.3; θ = 300° from the x-axisD. D = 40.4; θ = 138° from the x-axisE. E = 49.5; θ = 346° from the x-axisWhat is the resultant magnitude and direction of the given vectors?The resultant magnitude and direction of the vectors are as follows:
A. A = √(5.7² + 3.4²)
A = 6.6
θ = tan⁻¹(3.4/5.7)
θ = 30.8° from the x-axis
B. B = √{(-10)² + (-3²)}
B 10.4
θ = tan⁻¹(3/10) + 180
θ = 16.7° + 180°
θ = 196.7° from the x-axis
C. C = √{(12)² + (-20²)}
C = 23.3
θ = 360° - tan⁻¹(20/12)
θ = 300° from the x-axis
D. D = √{(-30)² + (27²)}
D = 40.4
θ = 180 - tan⁻¹(27/30)
θ = 138° from the x-axis
E. E = √{(48)² + (12²)}
E = 49.5
θ = 360° - tan⁻¹(12/48)
θ = 346° from the x-axis
In conclusion, the resultant of the vectors and direction are obtained using the resultant vector formula.
Learn more about resultant of vectors at: https://brainly.com/question/12534255
#SPJ1
When a 3.0 N weight is attached to a vertical coil spring, it stretches 5.0 cm. What weight would be required to stretch the spring 12.5 cm?
Group of answer choices
a. 7.5 N
b. 15 N
c. 4.5 N
d. 1.2 N
The weight required to stretch the spring 12.5 cm is 7.5 N (Option A)
Data obtained from the questionInitial weight (W₁) = 3 N Initial Length (L₁) = 5 cmNew length (L₂) = 12.5 cmNew Weight (W₂) =? How to determine the new weightThe new weight required to stretch the spring can be obtained as follow:
W₁ / L₁ = W₂ / L₂
3 / 5 = W₂ / 12.5
Cross multiply
W₂ × 5 = 3 × 12.5
Divide both sides by 5
W₂ = (3 × 12.5) / 5
W₂ = 7.5 N
Learn more about spring constant:
https://brainly.com/question/9199238
#SPJ1
The lion has a kinetic energy of 5000 j. What is the speed of the lion?
The lion has a kinetic energy of 5000 j, the speed of the lion is v = 100 / [tex]\sqrt{M1}[/tex] m/s
What is kinetic energy ?Kinetic energy is a form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy or Kinetic energy is the energy that an object possesses due to its motion. It is basically the energy of mass in motion. Kinetic energy can never be negative and it is a scalar quantity i.e. it provides only the magnitude and not the direction.
given
kinetic energy = 5000 J
speed = ?
since , mass is not given in the question
Let mass of lion will be = M1
kinetic energy = 1/2 * M1 * [tex]v^{2}[/tex]
5000 J = 1/2 * M1 * [tex]v^{2}[/tex]
[tex]v^{2}[/tex] = [tex]\sqrt{10,000 / M1}[/tex] m/s
v = 100 / [tex]\sqrt{M1}[/tex] m/s
The speed of the lion = v = 100 / [tex]\sqrt{M1}[/tex] m/s
To learn more about kinetic energy
https://brainly.com/question/12669551?referrer=searchResults
#SPJ4
2. A ball is tossed straight upwards with a velocity of 60m/s. Using an estimate of gravity of -10m/s², about how many seconds would it take to reach the peak (top of the flight). A.) 10 seconds B.) 3 seconds C.) 6 seconds D.) 12 seconds
Answer: A
Explanation:
Two objects X and Y move directly towards each other. The objects have the same mass.
Object X has a velocity of 5.0 m/s to the right. Object Y has a velocity of 3.0 m/s to the left.
Object X and object Y collide and stick together.
What is their velocity after colliding?
X and Y are two things that travel in the same direction. The mass of the things is the same. 5.0 m/s is the velocity of object x as it moves to the right. The velocity of object y to the left is 3.0 m/s. Objects x and y collide and adhere to one another. Following their collision, they both move at a speed of 1.0 m/s to the right.
Their velocity after colliding is 1.0 m / s to the right.
What is the velocity during the collision?
In a collision, the velocity change is always computed by subtracting the initial value from the final value. If an object is moving in one direction before a collision and rebounds or somehow changes direction, then its velocity after the collision has the opposite direction as before.Inelastic collisions occur when only the momentum is conserved but not the system's kinetic energy. Perfectly inelastic collisions happen when objects stick together and have a common velocity after collision. To solve for the final velocity in perfectly inelastic collisions, use v' = (m1v1 + m2v2)/m1 + m2.The magnitude of the relative velocity is the same before and after the collision.To learn more about velocity, refer to:
https://brainly.com/question/25749514
#SPJ9
You are raising up a big bucket of water from a 22.5 m deep well. The combined mass of the water and the bucket is 11.3 kg. The bucket is attached to a heavy duty steel chain. The mass of the chain is 17.9 kg. How much work do you perform during the lifting process? Tries 0/12 If it takes 1.75 minutes for you to raise the bucket of water out of the well, then what was your average power?
The amount of work done during the lifting process is 4465.125 J and our average power will be 42.525 W.
Given:
Depth of the well, h = 22.5m
Mass of heavy-duty steel chain, M = 17.9 kg
The combined mass of the water and bucket, m = 11.3 kg
time taken to raise the bucket out of the water, T = 1.75 min = 105 s
Calculation:
Consider that the center of mass of the steel chain is at the midpoint of the depth of the well.
Now, the work done during the lifting process can be calculated as:
W.D = (Work done in lifting bucket filled with water) + (work done to lift
the steel chain)
W.D = mgh + Mg (h/2) -( 1 )
where g is the acceleration due to gravity
Applying values in the above equation we get:
W.D = mgh + Mg (h/2)
= (11.3 kg)(9.8 m/s²)(22.5 m) + (17.9 kg)(9.8 m/s²)(22.5 m / 2)
= 2491.65 + 1973.475
= 4465.125 J
We know that the average power is given as:
P_avg = W.D / T - ( 2 )
where W.D is the work done during the lifting process
T is the time taken to raise the bucket out of the well
Applying values in the above equation, we get:
P_avg = W.D / T
= (4465.125 J)/(105 s)
= 42.525 W
Therefore, the amount of work done during the lifting process is 4465.125 J and our average power will be 42.525 W.
Learn more about work and energy here:
https://brainly.com/question/17290830
#SPJ4
In the pinball game, momentum is transferred from the plunger to the ___
In the pinball game, momentum is transferred from the plunger to the ball.
What is momentum?
Momentum is the quantity of motion of a moving body, measured as a product of its mass and velocity.
The formula of the momentum is: p = m*v
Here a pinball game machine is given.
We know that,
A plunger in a pinball is a spring loaded rod used to shoot the ball out into the playing field.When the plunger tugged all the way back and released, the plunger will send the ball flying around the playfield. so here elastic potential energy is converted to kinetic energy.That is how the momentum is transferred to the pinball from the plunger.Hence,
In the pinball game, momentum is transferred from the plunger to the ball.
Learn more about momentum here:
https://brainly.com/question/2193212
#SPJ4
If themass is 50kg, what weight of water is to be displaced to float on water? why
Answer:if youre looking for the weight of the thermas in genral it should be 500n
Explanation:using the formula w=mg
w=500x10
giving us 500 newtons which is the weight.
Normal human body temperature is 98.6°F. What is this temperature expressed in Celsius (°C) and in Kelvin (K)?
Answer: 37 Celsius and 310.15 K
Explanation:
C/5 = (F-32)/9 = (98.6-32)/9 = 66.6/9 = 7.4
C = 7.4 * 5 = 37 so the temperature is 37 Celsius
K = C + 273.15 = 37 + 273.15 = 310.15 K
What is the acceleration of a 2-kg mass if a 100-N force acts on it?
SOLUTION:
Acceleration = Force/mass
= 100N / 2 kgs
= 50 m/s
.
.
________________________________
HOPE IT HELPS
HOPE IT HELPS MARK BRAINLIEST!
FOLLOW ME!
If a car increases its velocity from zero to 60 km/h in 10 seconds, its acceleration is______.
Answer:
1.66m/s
Explanation:
here
initial velocity(u): 0m/s
final velocity (v):60km= 60×1000/60×60
:16.6m/s
time taken(t): 10s
now
acceleration:v-u/t
or a: 16.6-0/10
:16.6/10
acceleration: 1.66 m/s
In physics, acceleration is the rate at which the velocity of an object changes in relation to time. The sum of all forces exerted on an object results in its acceleration. The acceleration is 1.66 m/s².
The rate at which velocity, either in terms of speed or direction or both, varies over time is known as acceleration. A circle's motion accelerates despite its constant speed because its direction is continually shifting.
Here
initial velocity(u) = 0m/s
final velocity (v) = 60km
v = 60 × 1000 / 60 × 60
v = 16.6 m/s
Time taken(t) = 10s
Now.
acceleration = v-u / t
a = 16.6-0/10
a = 16.6/10
a = 1.66 m/s²
To know more about acceleration, visit;
https://brainly.com/question/29766852
#SPJ7
An object at rest has no ________ energy, but it may have ________ energy resulting from its location or structure. An object at rest has no ________ energy, but it may have ________ energy resulting from its location or structure. chemical; potential kinetic; potential kinetic; heat potential; kinetic
Answer: An object at rest has no kinetic energy, but it may have potential energy resulting from its location or structure.
Explanation: To find the answer, we need to know more about the kinetic and potential energies.
What is kinetic energy of a body?Kinetic energy is a form of mechanical energy possessed by a body by virtue of its motion.Kinetic energy of a body of mass m moving with a velocity v is given by,[tex]KE=\frac{1}{2}mv^2[/tex]
What is potential energy?Potential energy is a form of mechanical energy possessed by a body by virtue of its position in the field or configuration.PE is always associated with a conservative force.There cannot be potential energy due to frictional or viscous forces.Thus, we can conclude that, an object at rest has no kinetic energy, but it may have potential energy resulting from its location or structure.
Learn more about the kinetic and potential energies here:
https://brainly.com/question/28044620
#SPJ4
2) Which pattern of organization did Alicia choose for her speech outline?
The pattern of organization Alicia chose for her speech outline is referred to as topical.
What is Topical pattern of organization?
This type of organization involves the arrangement of subtopics within a large or broad topic.
Alicia talked about speech pathology and the different subtopics include challenges, therapy etc which depicts topical pattern.
Read more about Topical pattern of organization here https://brainly.com/question/12235209
#SPJ1
A ball of mass 4 kg is initially traveling at 2 m/s and has a 5 N force applied to it for 3 s. What is the final velocity of the ball?
A. 4 m/s
B. 12 m/s
C. 5.75 m/s
D. 3.25 m/s
Answer:
the answer to your question will be D
Explanation:
5 N* 3S =3.25
What is the energy of an electromagnetic wave that has a wavelength of
7.0 x 10-12 m? Use the equation E= hc where hc = 1.99 × 10-25 J-m.
OA. 2.8 × 10-14 J
OB. 1.4 x 10-36 J
OC. 9.0 x 10-37 J
OD. 7.2 x 1035 J
SUBMIT
[tex] {\qquad\qquad\huge\underline{{\sf Answer}}} [/tex]
Here we go ~
[tex]\qquad \sf \dashrightarrow \:E = \dfrac{hc}{\lambda} [/tex]
here,
[tex] \sf{hc = 1.99 × {10}^{-25} J - m} [/tex][tex] \sf{\lambda = 7.0 × {10}^{-12}} [/tex]____________________________________
[tex]\qquad \sf \dashrightarrow \: E = \cfrac{1.99 \times 10 {}^{ - 25} }{7 \times 10 {}^{ - 12} } [/tex]
[tex]\qquad \sf \dashrightarrow \: E= \cfrac{1.99}{7} \times 10 {}^{ (- 25 + 12)} { } [/tex]
[tex]\qquad \sf \dashrightarrow \:E= 0.284 \times 10 { }^{ - 13} [/tex]
[tex]\qquad \sf \dashrightarrow \: E= 2.84 \times 10 { }^{ - 14\:\; } J\: \: [/tex]
so, correct choice is A
Consider two copper wires. one has twice the length and twice the cross-sectional area of the other. how do the resistances of these two wires compare?
Answer:
R = ρ L / A where R is the resistance and ρ the resistivity:
R2 / R1 = (L2 / A2) / (L1 / A1) = L2 * A1 / (L1 * A2)
R2 / R1 = (2 L * A) / (L * 2 A) = 1
Their resistances should be the same.
A solenoid 6.00 cm in diameter and 10.0 cm long has 750 turns and carries a current of 15.0 A. Calculate the magnetic flux through the circular cross-sectional area of the solenoid.
The magnetic flux through the circular cross-sectional area of the solenoid is 0.00066 Weber or (Tm²).
What is a solenoid?A wire tightly twisted in a lengthy, thin coil is a solenoid. Due to its design, the solenoid will have an electromagnet inside of it and a weak magnetic field surrounding it if we pass a current through it.
Equation of solenoid's magnetic field:
The simplest solenoid to describe is one with unlimited length. An infinite solenoid's magnetic field has a constant within and a precise zero value outside. If we can accept that the magnetic field near the ends will be different from what is calculated for just an infinite solenoid, the unlimited solenoid is frequently a rough estimate of an actual, finite-length solenoid.By utilizing the convolution operation as well as right hand rule, the magnetic field within a large solenoid is appropriately computed, but all of that can be condensed into:
B = (µ₀ × N × I )/ L
where
B = magnetic field (Tesla)
µ₀ = [tex]\pi[/tex]× 10^-7 (Tm/A ) is the vacuum permeability,
N = number of turns on solenoid,
I = electric current (Ampere)
L = length of the solenoid (m)
According to the question;
A diameter of solenoid 6.00 cm.
A radius of solenoid is 3 cm = 0.03m
Number of turns = 750
The length of solenoid is 10cm = 0.1m
Substitute all the values in equation to fine mangetic filed.
B = ([tex]\pi[/tex]×[tex]10^{-7}[/tex] × 750× 15 )/ 0.1
B = 0.035 Tesla
The formula for magnetic flux is
Ф = B×A
= B×([tex]\pi[/tex][tex]r^{2}[/tex])
= 0.035×[tex]\pi[/tex]×[tex].03^{2}[/tex]
Ф = 0.000099
Ф = 99×[tex]10^{-6}[/tex] Weber
Therefore, the magnetic flux through the circular cross-sectional area of the solenoid. is 99×[tex]10^{-6}[/tex] Weber.
To know more about the solenoid, here
https://brainly.com/question/17086348
#SPJ4
How do the resistances of two conducting wires compare if they have the same length, but one is twice the radius of the other?.
The thicker wire has one-fourth the resistance of the thinner wire.
What are resistance and resistivity?The characteristic of a substance that prevents the flow of current is known as resistance. The free electrons begin to move in a specific direction when a voltage is applied across the conductor. These electrons collide with atoms or molecules as they move, creating heat in the process. These atoms or molecules prevent free electrons from moving through a substance. Resistance is represented by the symbol R.
Specific resistance is another name for resistivity. A substance with certain dimensions, such as one meter in length and a cross-sectional area of one square meter, has a resistance that is represented by its resistivity. Resistivity or specific resistance is represented by ρ.
The relation between resistance R and resistivity ρ is given as:
R = ρL/A
where,
R = resistance of the conductor
ρ = resistivity of the material
L = length of the conductor
A = cross-sectional area of the conductor
Calculation:Given,
r₁ = 2r₂
L₁ = L₂
where
r₁ = radius of the first conductor
r₂ = radius of the second conductor
L₁ = length of the first conductor
L₂ = length of the second conductor
To find
R₁/R₂ =? (the ratio of R₁ and R₂)
If the radius is twice the other then the area will become,
A₁ = π r₁²
A₂ = π r₂²
A₁ = π (2r₂)²
= 4π r₂²
Therefore,
A₁ = 4 A₂
Now put the values in the formula,
R = ρL/A
R₁/R₂ = ρ L₁ A₂/ ρ L₂ A₁
R₁/R₂ = L A₂/ L (4A₂)
R₁/R₂ = 1/4
R₁ = R₂/4
Hence, the thicker wire with twice the radius of the thin wire has one-fourth the resistance of the thinner wire.
I understand the question you are looking for is this:
How do the resistances of two conducting wires compare if they have the same length, but one is twice the radius of the other?
(a) The thicker wire has half the resistance of the thinner wire
(b) The resistance is the same in both wires
(c) The thicker wire has one-fourth the resistance of the thinner wire
(d) The thicker wire has twice the resistance of the thinner wire.
Learn more about resistance here:
brainly.com/question/14547003
#SPJ4
Which of the zodiac constellations will be highest at midnight?
Answer:
Virgo will be the highest zodiac constellations at night.
Two men standing on the same side of wall and at the same distance from It, such that they are 4oom apart when one fires a gun the other hears the first report in 1.2s and the second in 0.5s after the first. calculate 1) Velocity of sound in air . 2)the perpendicular distance of the men from the wall.
Answer:
1. 571.43m/s
2. 142.9m and 342.9m
Explanation:
1.Take the difference in time.
1.2-0.7=0.7 seconds
Take the distance between them and divide with differnce in time.
400÷0.7=571.43 seconds.
2.Take the time of the two men and divide by two.
0.5÷2= 0.25 secs
1.2÷2= 0.6 secs
multiply each with the velocity.
0.25×571.43=142.9m
0.6×571.43=342.9m