The phase of the moon changes as it orbits around the Earth. It takes approximately 29.5 days for the moon to complete one orbit.
Therefore, if the moon is highest in the sky this morning at 6:00 am, one week from now it will be approximately halfway through its orbit. This means that the moon will be in its third quarter phase. During the third quarter phase, the moon appears as a half-moon in the sky with the right side illuminated.
This phase occurs when the moon is between the last quarter phase and the new moon phase. As the moon continues to orbit the Earth, it will eventually reach the new moon phase, where it appears completely dark in the sky. The cycle then repeats itself as the moon moves from new moon to full moon and back again. Understanding the phases of the moon can be helpful in planning outdoor activities and understanding the natural rhythms of the Earth and its satellite.
to know more about phase of the moon click this link
brainly.com/question/1331515
#SPJ11
A 100-newton object is lifted 100 meters in 100 seconds. What is the
power generated in this situation?
the unit of acceleration is derived unit why
Answer:
Mass is a base unit, acceleration is a derived unit calculated as a function of length and time which are both base units. Any unit definition that is a function of more basic units is considered a derived unit.
Determine the amount of work you would need to do in order to stop a 1100kg car with 1400J of kinetic energy.
Answer:
W = -1400 J
Explanation:
Let's use the relationship between work and kinetic energy
W = ΔK
kinetic energy is
K = ½ m v²
therefore in this case
K₀ = 1400 J
Thus
W = 0 -1400
W = -1400 J
The negative sign indicates that the work is done against the energy, that is, in the opposite direction to the movement
Light described as what two things?
Answer:modeled as an electromagnetic wave. In this model, a changing electric field creates a changing magnetic field.
Explanation:
An island reports that in the year 2000 there were 240 babies born. That same year, 100 individuals died.
What is the growth rate for this island?(Show your work and indicate if it is positive or negative.)
Answer:
+ 140
Explanation:
You can show the natural growth rate by subtracting the death rate from the birth rate during one year and converting this into a percentage.
Here it would be:
240 - 100 = + 140
// if you want to convert it to percentage, you need to know the size of the population
it would be
140 / (population size) * 100 %
Mr. Rosa is able to travel at 10m/s. How much time will it take him to travel a distance of 542 meters?
What is the known?
What is the unknown?
Plug it in.
What is your answer?
// s - displacement, t - time, v - velocity
Known:
s = 542 meters;
v = 10m/s
Unknown:
t - ?
Formula:
t = s / v
Solution:
t = 542 / 10 = 54,2 (s)
Answer:
54,2 s
Make me the brainliest, please
The following figures show four positions (1-4) of a comet during its orbit of the Sun. Also shown is the orbit of the Earth around the Sun. Rank the positions of the comet from left to right based on the size of its tail, from shortest to longest. (Not to scale; tails not shown.)
3, 1, 2, 4 is the arrangement according to their comet's tail.
The length of a comet's tail depends primarily on the comet's distance from the sun. It is longer when the comet is closer to the sun and shorter or (Negligible) when the comet is farther from the sun.
Due to sunlight's radiation pressure, the comet's tail will always point away from the sun. Small dust particles are pushed away from the sun by sunlight with a stronger force than by gravity pulling them in the opposite direction. As a result, a comet's tail streams behind the nucleus during its inbound transit, but it streams in front of the nucleus during its outbound passage back to the outer solar system. Typically, gas jets produced by thawing frozen volatiles expel dust particles from a comet's surface.
To learn more about Comet's tail please visit-
https://brainly.com/question/12660644
#SPJ1
1. How much electrical energy is needed to bring two charges Q1= 5.5 x 10-7C and Q2= 1.7 x 10-6 C from infinity to where they are 1 meter apart.
Answer:
The electrical energy needed is 8.415*10⁻³ N
Explanation:
Energy is the ability of a body to make changes or work.
By separating or joining two electric charges a distance (for example, a radius r) within their electric fields, you are taking away or giving the electric charges energetic potentials, relative to each other. By releasing these charges, they will attract or repel each other, releasing that acquired electrical energy.
In other words, electric potential energy is linked to the particular configuration of a conglomerate of point charges in a defined system.
That is, it calculates the capacity of an electrical system to carry out a task based exclusively on its position or configuration. So, it is a kind of energy stored in the system, or the amount of energy that it is capable of delivering.
Thus, a charge will exert a force on any other charge and the potential energy is the result of the set of charges.
The electric potential energy that has a point charge q in the presence of another point charge Q that are separated by a certain distance r is:
[tex]Ep=K*\frac{Q1*Q2}{r^{2} }[/tex]
where:
Ep is the electric potential energy. It is measured in Newton (N). Q1 and Q2 are the values of the two point charges. They are measured in Coulombs (C). r is the value of the distance that separates them. It is measured in meters (m). K is the constant of Coulomb's law. For vacuum its value is approximately 9*10⁹ N*m²/C²In this case:
Q1=5.5*10⁻⁷ CQ2=1.7*10⁻⁶ Cr=1 mReplacing:
[tex]Ep=9*10^{9}\frac{N*m^{2} }{C^{2} } *\frac{5.5*10^{-7}C *1.7*10^{-6}C }{(1m)^{2} }[/tex]
Solving:
Ep= 8.415*10⁻³ N
The electrical energy needed is 8.415*10⁻³ N
The electrical energy is needed to bring two charges Q1 and Q2 from infinity to where they are 1 meter apart is 8.415 x 10⁻³ N.
What is the electric potential?An electric potential can be defined as the amount of work or energy needed to move a charge from one point to another against the electrical field.
We know that in order to know electrical energy is needed to bring two charges Q1= 5.5 x 10⁻⁷C and Q2= 1.7 x 10⁻⁶ C from infinity to where they are 1 meter apart, we need to calculate electric potential energy between the two charged particles,
[tex]E_P = k\dfrac{Q_1Q_2}{d^2}[/tex]
Substitute the values,
[tex]E_P = 9 \times 10^9 \dfrac{5.5 \times 10^{-7} \times 1.7 \times 10^{-6}}{1^2}\\\\E_P = 8.415 \times 10^{-3}\rm\ N[/tex]
Hence, the electrical energy is needed to bring two charges Q1 and Q2 from infinity to where they are 1 meter apart is 8.415 x 10⁻³ N.
Learn more about Electrical Potential:
https://brainly.com/question/9383604
What is the only part in our body we do not stretch?
Answer:
The quadriceps consists of four muscles: the skinny rectus femoris and the three huge “vasti” — vastus lateralis/intermedius/medialis. The vasti are only elongated by knee flexion, which is limited to about 120˚ when the calf hits the hamstrings. The vasti cannot be stretched strongly.
Answer:Masseter and temporalis
Why it’s unstretchable: The jaw can only open so far.
Why it’s a dang shame: Jaw tension is epidemic, and trigger points in these muscles cause a wide array of strange face and head pains, including toothaches, headaches, and earaches.
An object moving in the air at a constant speed is considered to be in a balanced state. Explain Why
Answer:
and there is no friction
Explanation:
An object at rest has zero velocity - and (in the absence of an unbalanced force) will remain with a zero velocity. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force. An object in motion with a velocity of 2 m/s, East will (in the absence of an unbalanced force) remain in motion with a velocity of 2 m/s, East. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force. Objects resist changes in their velocity.
balance the equation
P + 02 → P205
Answer:
4P + 502 → 2P205
Explanation:
Hence the above equation is balanced.
Explanation:
[tex] \underline{ \underline{ \large{ \text{Given \: chemical \: equation}}}} : [/tex]
[tex] \tt{P \: + O _{2} \: \: \: \: ➞ \: \: P_{2} \: O_{5}}[/tex]Here , Multiply P2O5 by 2 and O2 by 5 to equalize oxygen :
[tex] \tt{P+ 5O_{2} \: \: ➞\: \: 2P_{2} \:O_{5}}[/tex]
Now , To equalize P atoms , Multiply P by 4
[tex] \boxed{ \large{\tt{ 4P + 5O _{2} \: ➞ \: \: \: \: 2P_{2} \: O_{5}}}}[/tex]
Here , On the left side we have 4P and On the right side ,we have 4P. Again , On the left side , we have 10 O and On the right side , we have 10 O. And yippie , we got the balanced chemical equation !!!
Hope I helped ! ♡
Have a wonderful day / night ! ツ
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
A concrete dam holds back a large reservoir of water
potential or kinetic energy
Answer:
The water in a reservoir behind a hydropower dam is another example of potential energy. The stored energy in the reservoir is converted into kinetic energy as the water flows down a large pipe called a penstock and spins a turbine.
Explanation:
Hope this helps :))
A concrete dam holds back a large reservoir of water potential energy, the stored potential energy is converted into the kinetic energy which is converted into mechanical energy and then further converted into electrical energy.
What is hydropower?A dam or other construction that alters the natural flow of a river or other body of water is used to generate hydropower, often known as hydroelectric power.
In order to generate energy, hydropower uses the perpetual, never-ending water cycle, which uses water as a fuel and leaves no waste products behind. Although there are many different kinds of hydropower plants, they are always propelled by the kinetic energy of water moving downstream.
Thus, a concrete dam holds back a large reservoir of water potential energy.
To learn more about hydropower here, refer to the link given below ;
https://brainly.com/question/22258411
#SPJ2
The center of gravity of the body is at________ position in state of unstable equilibrium.
Answer:
Highest.
Explanation:
This is because, in a state of unstable equilibrium, the center of gravity is at highest which as a result of when the body topples at it's base, there is a shift in the centre of gravity, and the centre of gravity shift position by moving towards the lower position and it does not return to it's former position again.
A horse has a momentum of 25 kg*m/s and a velocity of 2.5 m/s. What is the horse mass?
==================================================
Work Shown:
We have these variables
p = momentum = 25 kg*m/sm = mass = unknownv = velocity = 2.5 meters per secondSolving for the mass gets us...
p = m*v
25 = m*2.5
25/2.5 = m
10 = m
m = 10
The mass of the horse is 10 kg.
15. Which of the following is the correct electron configuration for neon (10Ne)?
A. 1s 2s22p
C. 184 2s2 3s2 2p?
B. 1s 2s2 3s2 2p4
D. 152 282 3s2p5
Answer:
1s2,2s2,2p6 or (He) 2s2 2p6
pls help i’ll give brainliest if you give a correct answer!!
Answer:
C. The distance traveled by an object at a certain velocity.
Explanation:
YW!
Answer:
third option is the most accurate
What is a Sport car transformation
Answer:
when a car transforms...
Explanation:
Explanation:
Vivimos en un puente en lo que el diseño de coches se refiere, consecuencia de la gran disrupción de la automación que ocurriría en los próximos años.
6th grade science pls help
Answer:
D
Explanation:
I hope you get a good grade!
A ray diagram shows an object placed between 2F and F of a convex lens.
The image produced is
smaller than the object.
upright.
larger than the object.
virtual
Answer:
larger than object
Explanation:
the image formed will be on the opposite side of lens and magnified
Answer:
C
Explanation:
Theoretically, what would be the mass of an object accelerated
to 100% the speed of light?
I know most of the answers will say infinity, but still this needs deeper look about its physical meaning and does it consider a practical logic?
Infinity usually used for something we could not measure, however the reality may be different!
The denominator of the equation would become 0 and the mass would become infinite if the mass's velocity ever surpassed the speed of light.
Speed of light and mass:The amount of energy needed to accelerate an infinite mass would be infinite as well. The fact that light travels at the speed of c indicates that it has no rest mass.
When a mass particle approaches the speed of light, its energy grows and becomes infinite at that speed, which is why it can never be accelerated to that speed.
Experiments have confirmed this, and it has been demonstrated that nothing goes faster than the speed of light.
Find out more information about 'Speed of light'.
https://brainly.com/question/394103?referrer=searchResults
The acceleration of an object is ____________________ related to the net force exerted upon it and _____________________ related to the mass of the object.
Is it resistant to mud fire
Dirt that you can not burn typically does no longer have any materials that are flammable at decrease temperatures. Mostly due to the fact it is full of water and non-burnable minerals. But a lot of what's in grime can certainly burn if it is dried. Dirt is made of many unique things.
yes
Explanation:
since they are extremely dense they lack the ability to trap air due to its structure
An outfielder throws a baseball to home plate with a velocity of 27 m/s at 35o. It is caught by the first baseman. How long was it in the air
Answer:
Explanation:
Initial velocity of the ball = 27 m /s .
Its vertical component = 27 sin 35 = 15.48 m /s
Considering vertical displacement to the top point ,
initial velocity u = 15.48 m /s
acceleration due to gravity g = 9.8 ,
velocity at the top v = 0
v = u - gt
0 = 15.48 - 9.8 t
t = 15.48 / 9.8 = 1.579 s
So time of ascent = 1.579 s
Similarly , time of descent = 1.579
Total time of flight = 2 x 1.579
= 3.16 s
Why does the chord of an electric heater not glow while the heating element does
Answer:
The heating element of the heater is made up of alloy which has very high resistance so when current flows through the heating element, it becomes too hot and glows red. But the resistance of cord which is usually of copper or aluminum is very low so it does not glow.
Interstellar dust is effective at blocking visible light because Choose one: A. the dust is so dense. B. dust grains are so small. C. dust grains are so large. D. dust grains are so few.
Answer: Interstellar dust is effective at blocking visible light because dust grains are so small.
Explanation: To find the answer, we need to know more about the interstellar dust.
What is interstellar dust?Interstellar dust developed from dying stars as they burn out.This dust can block the visible light as well as UV emerging from the stars, because dust grains can block light at optical wavelengths.it absorbs and scatters blue light more than red. thus, red light can pass through it.If we place a star behind the dust, it will look more redder than its usual color. This is called interstellar reddening.Grains have a typical size of [tex]10^-6 m[/tex].Thus, we can conclude that, Interstellar dust is effective at blocking visible light because dust grains are so small.
Learn more about the interstellar dust here:
https://brainly.com/question/28044836
#SPJ4
In a bar magnet the magnetic force seems to come from each end. The ends of a bar magnet are
called the___
What one word completes the sentence?
how was youll day still in school by the way.
My day is alright! I just finished school for the day.. and I’m excited for the weekend! How was your day?
A hockey puck, with an initial velocity of 65 km/h [W], ricochets off the boards. After 0.76 s in contact with the boards, its final velocity is 47 km/h [E]. Determine the acceleration of the puck.
Answer:
a = 40.937 m / s²
Explanation:
For this exercise let's use the relationship between momentum and momentum variation
I = Δp
F t = m v_f - mv₀
F = m (v_f -v₀) / t
let's reduce the magnitudes to the SI system
v_f = 47 km / h (1000m / 1 km) (1h / 3600 s) = 13.056 m / s
v₀ = - 65 km / h = -18.056 m / s
the negative sign is bearing the speed is west
let's calculate
F = m (13.056 + 18.056) / 0.76
F = m 40.937
now we can use Newton's second law
F = m a
m 40.937 = m a
a = 40.937 m / s²
Guys please help me I am dead confused
Answer:
A
Explanation
The diagram in A. contain a variable resistor which can be use to vary the pd from the 6v battery
A 1-kg book is at rest on a desk. Determine the force the desk exerts on the book
[tex]\displaystyle F_n = 9.8 \ N[/tex]
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
BracketsParenthesisExponentsMultiplicationDivisionAdditionSubtractionLeft to RightPhysics
Forces
SI Unit: Newtons N
Free Body Diagrams
Gravitational Force: [tex]\displaystyle F_g = mg[/tex]
m is mass (in kg)g is Earth's gravity (9.8 m/s²)Normal Force: [tex]\displaystyle F_n[/tex]
Newton's Law of Motions
Newton's 1st Law of Motion: An object at rest remains at rest and an object in motion stays in motionNewton's 2nd Law of Motion: F = ma (Force is equal to [constant] mass times acceleration)Newton's 3rd Law of Motion: For every action, there is an equal and opposite reactionExplanation:Step 1: Define
1 kg book at rest
Step 2: FBD
See Attachment
Draw a free body diagram to label the forces acting upon the book. We see that we would have gravitational force from Earth pointing downwards and normal force from the surface of the desk pointing upwards.
Since the book is not moving, we know that ∑F = 0 (sum of forces equal to 0).
Step 4: Find Normal Force
Define Forces [Newton's Law of Motions]: [tex]\displaystyle \sum F = 0[/tex][Newton's Law of Motions] Substitute in forces: [tex]\displaystyle F_g - F_n = 0[/tex][Newton's Law of Motions] [Addition Property of Equality] Isolate [tex]\displaystyle F_n[/tex]: [tex]\displaystyle F_g = F_n[/tex][Newton's Law of Motions] Substitute in [tex]\displaystyle F_g[/tex]: [tex]\displaystyle mg = F_n[/tex][Newton's Law of Motions] Rewrite: [tex]\displaystyle F_n = mg[/tex][Newton's Law of Motions] Substitute in variables: [tex]\displaystyle F_n = (1 \ kg)(9.8 \ \frac{m}{s^2})[/tex][Newton's Law of Motions] Multiply: [tex]\displaystyle F_n = 9.8 \ N[/tex]