To compare the effect of the -OH group on the surface tension, we should compare two liquids that differ only in the presence or absence of the -OH group. This will help isolate the impact of the -OH group on surface tension while keeping other factors constant.
In this case, we can compare ethanol (CH3CH2OH) and pentane (C5H12). Ethanol contains the -OH group, while pentane does not.
By comparing these two liquids, we can observe the specific influence of the -OH group on surface tension. Ethanol's -OH group introduces hydrogen bonding, which can increase intermolecular forces and consequently affect surface tension. Pentane, lacking the -OH group, does not exhibit hydrogen bonding to the same extent.
By examining the surface tension of ethanol and pentane, we can attribute any differences primarily to the presence or absence of the -OH group, allowing for a more focused comparison of its effect.
To learn more about hydrogen click here:brainly.com/question/30623765
#SPJ 11
fill in the blank. during the electrolysis of a na2so4 solution with a few drops of phenolphthalein, the solution turns pink around an electrode. this observation indicates that water is being _ at that electrode.
During the electrolysis of a Na2SO4 solution with a few drops of phenolphthalein, the solution turns pink around an electrode. This observation indicates that water is being oxidized at that electrode.
The pink color around the electrode indicates the presence of hydroxide ions ([tex]OH^-[/tex]) produced by the reaction of water molecules with the electrons generated at the electrode. In this case, water is being oxidized, which means it loses electrons, at the anode (positive electrode) to form oxygen gas ([tex]O_2[/tex]), hydrogen ions ([tex]H^+[/tex]), and electrons ([tex]e^-[/tex]).
The overall chemical reaction at the anode can be written as:
[tex]2H_2O(l) -> O_2(g) + 4H^+(aq) + 4e^-[/tex]
However, The [tex]H^+[/tex] ions produced in the reaction will react with the [tex]SO_4^2^-[/tex] ions present in the solution to form sulfuric acid ([tex]H_2SO_4[/tex]), which makes the solution acidic and turns the phenolphthalein pink. This observation indicates that water is being oxidized at that electrode.
To know more about Electrolysis refer here :
https://brainly.com/question/12994141
#SPJ11
Calculate the osmotic pressure generated at 298 K if a cell with a total solute concentration of 0.500 mol/L is immersed in pure water. The cell wall is permeable to water molecules, but not to the solute molecules.
The osmotic pressure generated can be calculated using the equation π = iMRT, where π is the osmotic pressure, i is the van't Hoff factor (which is 1 for this case because the solute is not dissociated), M is the molarity of the solute, R is the gas constant (8.314 J/mol K), and T is the temperature in Kelvin (298 K).
To calculate the osmotic pressure generated at 298 K when a cell with a total solute concentration of 0.500 mol/L is immersed in pure water, follow these steps:
1. Identify the given information:
- Temperature (T) = 298 K
- Solute concentration (c) = 0.500 mol/L
2. Use the formula for osmotic pressure, which is given by:
π = cRT
where π is the osmotic pressure, c is the solute concentration, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.
3. Plug the given values into the formula:
π = (0.500 mol/L) x (0.0821 L atm/mol K) x (298 K)
4. Calculate the osmotic pressure:
π = 12.3075 atm
Therefore, the osmotic pressure generated at 298 K when a cell with a total solute concentration of 0.500 mol/L is immersed in pure water is approximately 12.31 atm.
To know about pressure visit:
https://brainly.com/question/12971272
#SPJ11
Which ion would you expect to have the largest crystal field splitting Δ?a) [Rh(CN)6]3-. b) [Rh(H2O)6]2+. c) [Rh(H2O)6]3+. d) [Rh(CN)6]4-
Option (a) is correct [Rh(CN)6]3-, the Rh ion is in the +3 oxidation state and has the electronic configuration of d6. The CN- ligand is a strong field ligand, which means it creates a large splitting. Therefore, the crystal field splitting Δ for this ion is expected to be the largest.
To determine which ion would have the largest crystal field splitting Δ, we need to consider the electronic configuration and the ligand field strength of each ion. Crystal field splitting refers to the energy difference between the d-orbitals in a metal ion when it interacts with ligands. The stronger the ligand field, the greater the splitting.
In option a) [Rh(CN)6]3-, the Rh ion is in the +3 oxidation state and has the electronic configuration of d6. The CN- ligand is a strong field ligand, which means it creates a large splitting. Therefore, the crystal field splitting Δ for this ion is expected to be the largest.
In option b) [Rh(H2O)6]2+, the Rh ion is in the +2 oxidation state and has the electronic configuration of d7. The H2O ligand is a weak field ligand, which means it creates a small splitting. Therefore, the crystal field splitting Δ for this ion is expected to be smaller than option a).
In option c) [Rh(H2O)6]3+, the Rh ion is in the +3 oxidation state and has the electronic configuration of d6. The H2O ligand is also a weak field ligand, which means it creates a small splitting. Therefore, the crystal field splitting Δ for this ion is expected to be smaller than option a).
In option d) [Rh(CN)6]4-, the Rh ion is in the +4 oxidation state and has the electronic configuration of d5. The CN- ligand is a strong field ligand, which means it creates a large splitting. However, since the Rh ion is in a higher oxidation state, it has fewer d-electrons to split. Therefore, the crystal field splitting Δ for this ion is expected to be smaller than option a).
In conclusion, option a) [Rh(CN)6]3- is expected to have the largest crystal field splitting Δ.
To know more about crystal field splitting visit :
https://brainly.com/question/31667042
#SPJ11
uppose n2h4 (l) decomposes to form nh3 (g) and n2 (g). if one starts with 2.6 mol n2h4, and the reaction goes to completion, how many grams of nh3 are produced?
If 2.6 mol of [tex]N_{2}H_{4}[/tex] is completely decomposed, 88.46 grams of [tex]NH_{3}[/tex] will be produced.
The balanced chemical equation for the decomposition of [tex]N_{2}H_{4}[/tex] is: [tex]N_{2}H_{4}[/tex] (l) → 2 [tex]NH_{3}[/tex] (g) + N2 (g)
According to the equation, 1 mole of [tex]N_{2}H_{4}[/tex] produces 2 moles of [tex]NH_{3}[/tex]. Therefore, 2.6 mol [tex]N_{2}H_{4}[/tex] will produce 2 x 2.6 = 5.2 mol [tex]NH_{3}[/tex].
To convert moles of [tex]NH_{3}[/tex] to grams, we need to use the molar mass of [tex]NH_{3}[/tex], which is 17.03 g/mol.
mass of [tex]NH_{3}[/tex] = number of moles of [tex]NH_{3}[/tex] x molar mass of [tex]NH_{3}[/tex]
mass of [tex]NH_{3}[/tex] = 5.2 mol x 17.03 g/mol = 88.46 g
Therefore, if 2.6 mol of [tex]N_{2}H_{4}[/tex] is completely decomposed, 88.46 grams of [tex]NH_{3}[/tex] will be produced.
To know more about molar mass, refer here:
https://brainly.com/question/30640134#
#SPJ11
which response has the following substances arranged in order of decreasing boiling point? a) gecl4. b) ch4. c) sicl4. d) sih4. e) gebr4.
The correct order of decreasing boiling point of the given compounds is CH₄ < SiH₄ < SiCl₄ < GeCl₄ < GeBr₄
We consider the molecular weights of the elements involved, as larger molecules tend to have higher boiling points. Then we look at the molecular structure and intermolecular forces, such as dipole-dipole interactions and van der Waals forces. The strength of intermolecular forces and thus the effect on boiling points is in the order ionic > non ionic dispersion > dipole dipole > hydrogen bonding. Based on molecular weights and intermolecular forces, we can arrange the substances in order of decreasing boiling point as listed above.
For more questions on boiling point: https://brainly.com/question/31647217
#SPJ11
calculate the concentration of h3o at equilibrium if the initial concentration of hclo2 is 1.51×10−2 m
The concentration of H3O+ at equilibrium depends on the equilibrium constant of the reaction, which is not given.
To calculate the concentration of H3O+ at equilibrium, we need to know the equilibrium constant (Keq) of the reaction between HClO2 and water.
The balanced equation for the reaction is:
HClO2 + H2O ⇌ H3O+ + ClO2-
Assuming that the reaction is in a dilute aqueous solution at standard temperature and pressure, the equilibrium constant expression is:
Keq = [H3O+][ClO2-]/[HClO2][H2O]
Without knowing the value of Keq, we cannot calculate the concentration of H3O+ at equilibrium.
However, we do know that HClO2 is a weak acid and will only partially ionize in water, so the concentration of H3O+ at equilibrium will be less than the initial concentration of HClO2.
For more such questions on constant, click on:
https://brainly.com/question/19340344
#SPJ11
The concentration of H3O+ at equilibrium is 1.60×10^-2 M.
To calculate the concentration of H3O+ at equilibrium, we need to use the equilibrium constant expression for the reaction: HClO2(aq) + H2O(l) ⇌ H3O+(aq) + ClO2-(aq). The equilibrium constant for this reaction is given by the expression: K = [H3O+][ClO2-]/[HClO2]. The initial concentration of HClO2 is given as 1.51×10^-2 M. Assuming that the change in concentration of H3O+ and ClO2- is "x" at equilibrium, the concentration of H3O+ at equilibrium can be calculated as [H3O+] = [ClO2-] = x and [HClO2] = 1.51×10^-2 - x. Substituting these values in the equilibrium constant expression and solving for "x" gives us the concentration of H3O+ at equilibrium as 1.60×10^-2 M.
learn more about Equilibrium here
brainly.com/question/30807709?
#SPJ11
3a. (2 pts) what are some examples of highly reduced and of highly oxidized sulfur in environmentally important compounds (give at least 2 of each)? *
Examples of highly reduced sulfur include hydrogen sulfide (H₂S) and elemental sulfur (S) and xamples of highly oxidized sulfur include sulfate ions (SO₄²⁻) and sulfuric acid (H2SO4).
As for examples of highly reduced and highly oxidized sulfur in environmentally important compounds, two examples of highly reduced sulfur include hydrogen sulfide (H₂S) and iron sulfide (FeS), both of which are commonly found in sulfide-rich environments such as swamps and hot springs.
Two examples of highly oxidized sulfur include sulfuric acid (H₂SO₄), which is a major component of acid rain and can cause significant environmental damage, and sulfate (SO₄), which is a common component of ocean water and is important in the biogeochemical cycling of sulfur in marine ecosystems.
Learn more about compound at
https://brainly.com/question/3489906
#SPJ11
Positive voltage means that the reaction occurs spontaneously and that energy is produced! What do you think happens with this energy here in our experiment? a) It is used to suck heat from the environment, the beaker will feel cold b) It is stored as potential energy, nothing will happen now c) It is turned into heat, the beaker will feel warm d) It is turned into light, the beaker will glow
The main answer is c) It is turned into heat, the beaker will feel warm.
Positive voltage means that the reaction occurs spontaneously and that energy is produced. In this experiment, the energy produced is in the form of heat. The heat generated will be absorbed by the contents of the beaker, making it feel warm. Therefore, option c is the correct answer. Options a, b, and d are incorrect because they do not align with the principle of energy conversion in this experiment.
In your experiment, when a positive voltage indicates a spontaneous reaction producing energy, the main answer is: c) The energy is turned into heat, causing the beaker to feel warm.
In this case, the positive voltage suggests that the reaction occurring within the beaker is exothermic, meaning it releases energy in the form of heat. As a result, the beaker will feel warm to the touch as the energy dissipates into the surrounding environment.
For more information on heat visit:
https://brainly.com/question/1429452
#SPJ11
what quantity of heat is released when 44g of liquid water at 0ºc freezes to ice at the same temperature?
The quantity of heat released when 44g of liquid water at 0ºC freezes to ice at the same temperature is 14,696 Joules.
To find the quantity of heat released when 44g of liquid water at 0ºC freezes to ice at the same temperature, you'll need to use the formula:
Q = m × Lf
where Q is the quantity of heat released, m is the mass of water, and Lf is the latent heat of fusion for water. The latent heat of fusion for water is approximately 334 J/g.
Step 1: Identify the mass of water (m) and the latent heat of fusion (Lf).
m = 44g
Lf = 334 J/g
Step 2: Use the formula to calculate the quantity of heat released (Q).
Q = m × Lf
Q = 44g × 334 J/g
Step 3: Perform the calculation.
Q = 14,696 J
So, the quantity of heat released when 44g of liquid water at 0ºC freezes to ice at the same temperature is 14,696 Joules.
Learn more about temparature here,
https://brainly.com/question/29213804
#SPJ11
If there were two bricks of the same mass, as shown below, what would happen to the acceleration of the bricks if the same force pushed them? Explain in newtons law of motion
According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass.
Therefore, if the same force is applied to two bricks of the same mass, their acceleration would be the same.
In the equation F = ma, where F is the net force, m is the mass, and a is the acceleration, we can see that if the mass of the bricks is the same, and the force applied is the same, the acceleration would be identical for both bricks. This means that they would experience the same rate of change in their velocity when the force is applied.
Regardless of the size or shape of the bricks, as long as their mass remains the same and the applied force is identical, Newton's Second Law states that their acceleration will be equal. This law demonstrates the fundamental relationship between force, mass, and acceleration in objects.
To learn more about Newton's Second Law click here : brainly.com/question/15280051
#SPJ11
what is the ph of a solution that is 0.10 m hc2h3o2 and 0.10 m nac2h3o2 (the conjugate base)? ka of hc2h3o2 = 1.8 x 10-5
4.74 is the ph of a solution that is 0.10 m hc2h3o2 and 0.10 m nac2h3o2 (the conjugate base).
To determine the pH of this solution, we need to first calculate the concentration of the conjugate base, which is NaC2H3O2. Since the initial concentration of HC2H3O2 is 0.10 M and it reacts with NaOH in a 1:1 ratio, the concentration of the conjugate base is also 0.10 M.
Next, we can use the Ka value of HC2H3O2 to calculate the concentration of H+ ions in the solution:
Ka = [H+][C2H3O2-]/[HC2H3O2]
1.8 x 10^-5 = x^2 / (0.10 - x)
where x is the concentration of H+ ions
Solving for x, we get a concentration of 1.34 x 10^-3 M.
Now, we can use the pH formula to calculate the pH of the solution:
pH = -log[H+]
pH = -log(1.34 x 10^-3)
pH = 2.87
Therefore, the pH of the solution is 2.87.
The pH of a solution with 0.10 M HC2H3O2 and 0.10 M NaC2H3O2 can be determined using the Henderson-Hasselbalch equation. This equation relates the pH, pKa, and the ratio of the concentrations of the conjugate base (A-) and weak acid (HA).
Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA])
In this case, the weak acid (HA) is HC2H3O2 and its conjugate base (A-) is C2H3O2-. The Ka of HC2H3O2 is given as 1.8 x 10^-5. To find the pKa, use the formula:
pKa = -log(Ka) = -log(1.8 x 10^-5) ≈ 4.74
Since the solution is a buffer with equal concentrations of the weak acid and its conjugate base (0.10 M each), the ratio of [A-] to [HA] is 1.
Now, apply the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA]) = 4.74 + log(1) = 4.74
So, the pH of the solution is approximately 4.74.
To know more about conjugate base visit:
brainly.com/question/30225100
#SPJ11
A 1.000 L vessel is filled with 2.000 moles of
N2, 1.000 mole of H2, and 2.000 moles of NH3.
When the reaction
N2(g) + 3 H2(g) ⇀↽ 2 NH3(g)
comes to equilibrium, it is observed that the
concentration of H2 is 2.21 moles/L. What is
the numerical value of the equilibrium constant Kc?
The numerical value of the equilibrium constant Kc is 3.81 x 10³.
The equilibrium constant (Kc) for a reaction gives us information about the position of the equilibrium. If Kc is a large value, it indicates that the equilibrium lies to the right, meaning that the forward reaction is favored. Conversely, if Kc is a small value, the equilibrium lies to the left, meaning that the reverse reaction is favored.
The balanced chemical equation for the reaction is
N₂(g) + 3H₂(g) ⇀↽ 2 NH₃(g).
At equilibrium, the concentration of H₂ is 2.21 moles/L, and the concentration of N₂ is 1.15 moles/L (calculated using stoichiometry).
Using the equation for Kc, which is Kc = [NH₃]²/([N₂][H₂]³), we can plug in the equilibrium concentrations of the reactants and products to solve for Kc.
Kc = [(2.000 moles/L)²]/[(1.15 moles/L)(2.21 moles/L)³]
= 3.81 x 10³.
As a result, the equilibrium constant Kc has a numerical value of 3.81 x 10³.
To know more about the Equilibrium constant, here
https://brainly.com/question/4430879
#SPJ1
For the reaction 3Fe2O3(s) + H2(g)=2Fe3O4(s) + H2O(g) H° = -6.0 kJ and S° = 88.7 J/K The equilibrium constant for this reaction at 297.0 K is _________. Assume that H° and S° are independent of temperature.
The equilibrium constant for this reaction at 297.0 K is approximately 2.98 x 10^6.
For the reaction 3Fe2O3(s) + H2(g) = 2Fe3O4(s) + H2O(g), we can determine the equilibrium constant at 297.0 K using the given values for the enthalpy change (H°) and the entropy change (S°). We can use the Gibbs free energy equation to find the equilibrium constant:
ΔG° = ΔH° - TΔS°
where ΔG° is the Gibbs free energy change, ΔH° is the enthalpy change, T is the temperature in Kelvin, and ΔS° is the entropy change. At equilibrium, ΔG° = 0, so we can solve for the equilibrium constant (K) using:
0 = ΔH° - TΔS°
ΔH° = TΔS°
K = e^(-ΔG°/RT)
Using the given values, ΔH° = -6.0 kJ = -6000 J and ΔS° = 88.7 J/K. The temperature is given as 297.0 K. We can now calculate ΔG°:
ΔG° = -6000 J - (297.0 K)(88.7 J/K) = -6000 J - 26335.9 J = -32335.9 J
Now, we can find the equilibrium constant K using the equation K = e^(-ΔG°/RT), where R is the ideal gas constant (8.314 J/mol K):
K = e^(-(-32335.9 J)/[(8.314 J/mol K)(297.0 K)]) = e^(32335.9 J / 2467.938 J) ≈ 2.98 x 10^6
Thus, the equilibrium constant for this reaction at 297.0 K is approximately 2.98 x 10^6.
To know more about Equilibrium constant visit:
https://brainly.com/question/10038290
#SPJ11
Which set of molecular orbitals has the same number of nodal planes? 0*2p and 1*2 02p and I* 2p I2p and 02p 01s and O2p
The set of molecular orbitals that has the same number of nodal planes is 02p and I* 2p. The 02p orbital has no nodal plane, while the 1*2p orbital has one nodal plane. Therefore, they have the same number of nodal planes.
Molecular orbitals are formed by the overlapping of atomic orbitals from different atoms in a molecule. The number of nodal planes in a molecular orbital is related to its energy and shape. A nodal plane is a plane where the probability of finding an electron is zero. In other words, the wave function of the electron is equal to zero at this plane. The more nodal planes a molecular orbital has, the higher its energy.
Learn more about the molecular orbital: https://brainly.com/question/29642622
#SPJ11
What did you calculate for the solubility product constant of CaCO4, using the concentrations of Ca2+ and C2O42- ? Explain
There is no compound called CaCO4. The correct formula for calcium carbonate is CaCO3.For calcium carbonate (CaCO3), the solubility product constant can be expressed as: Ksp = [Ca2+][CO32-]
However, I can provide you with information about the solubility product constant of CaCO3.The solubility product constant, Ksp, is a measure of the extent to which a compound dissociates into its ions in a saturated solution. For calcium carbonate (CaCO3), the solubility product constant can be expressed as:
Ksp = [Ca2+][CO32-]
The concentrations of Ca2+ and CO32- ions can be determined experimentally or calculated using equilibrium expressions and the solubility of calcium carbonate. However, without specific concentration values for Ca2+ and CO32-, it is not possible to calculate the exact value of the solubility product constant for CaCO3.If you provide the concentrations of Ca2+ and CO32-, I can help you calculate the solubility product constant using those values.
To learn more about calcium carbonate click here : brainly.com/question/15383829
#SPJ11
Caco3 + 2hcl --> cacl2 + h2o + co2how many moles of cacl2 has been made when 1. 8 moles of hcl was used?your answer should have 1 number after the decimal. your unit should include the unit and chemical formula. your answer should only have 1 number after the decimal
The answer is 0.9 mol of CaCl2. The balanced chemical equation for the given reaction is;
`CaCO_3 + 2HCl → CaCl_2 + H_2O + CO_2`
From the above-balanced chemical equation, we see that one mole of CaCO3 reacts with 2 moles of HCl to produce one mole of CaCl2, hence the mole ratio of CaCO3 to CaCl2 is 1:1.
Therefore, if 1.8 moles of HCl is used in the reaction, it means 0.9 moles of CaCO3 reacted (since the mole ratio of CaCO3 to HCl is 1:2).
Using the mole ratio of 1:1 from the balanced chemical equation, the number of moles of CaCl2 produced will be 0.9 moles of CaCl2.Hence, when 1.8 moles of HCl is used, the number of moles of CaCl2 produced is 0.9 moles. The unit is "mol" (moles), and the chemical formula for calcium chloride is CaCl2.
To learn more about mole, refer:-
https://brainly.com/question/30892840
#SPJ11
how many moles of electrons must be transferred through a cell in order to accumulate a total charge of 70,500 c? faraday’s constant=96,485c mol−1
Answer:We can use the formula:
moles of electrons = total charge / Faraday's constant
Plugging in the given values, we get:
moles of electrons = 70,500 C / 96,485 C/mol
moles of electrons = 0.731 mol (rounded to three decimal places)
Therefore, 0.731 moles of electrons must be transferred through the cell to accumulate a total charge of 70,500 C.
learn more about moles of electrons
https://brainly.com/question/27267351?referrer=searchResults
#SPJ11
A student is given an unknown aqueous sample containing one of the three ions, A Ba?" or Mg2+ There is limited unknown so the student can only run a couple of tests. Select all tests, based on the table above, that will not provide useful information, even when performed correctly to identify ions present in the unknown Na, SO NOOH Na,CO 0/2 pts incorrect
To identify the ions present in the unknown aqueous sample containing either Ba2+, Na+, or Mg2+, you should avoid tests that will not provide useful information. Based on the information provided, using NaOH (sodium hydroxide) and Na2CO3 (sodium carbonate) as reagents may not yield conclusive results to differentiate between these ions. Therefore, you should consider alternative tests to accurately identify the ion present in the sample.
About sodium carbonateSodium carbonate, Na₂CO₃, is the sodium salt of carbonic acid which is easily soluble in water. Pure sodium carbonate is a white, colorless powder that absorbs moisture from the air, has an alkaline/bitter taste, and forms strong alkaline solutions.
You can learn more about Sodium Carbonate at https://brainly.com/question/30669877
#SPJ11
1. Using average bond enthalpies (linked above), estimate the enthalpy change for the following reaction:
CH3Cl(g) + Cl2(g)CH2Cl2(g) + HCl(g)
_______ kJ
2.
Bond Bond Energy (kJ/mol)
H-H 436
O=O 498
O-O 146
H-O 463
Using the values of bond energy from the table above, estimate the enthalpy change for the following reaction:
H2(g) + O2(g) H2O2(g)
_______ kJ
1. The enthalpy change for the reaction is - 104 kJ.
2. The enthalpy change for the reaction is - 138 kJ.
1. The chemical reaction is as :
CH₃Cl(g) + Cl₂(g) ----> CH₂Cl₂(g) + HCl(g)
The Bond Energy (kJ/mol)
The bond energy, C-H = 414
The bond energy, Cl - Cl = 243
The bond energy, H-Cl = 431
The bond energy, C-Cl = 330
The enthalpy change is as :
ΔH = ∑ H reactant - ∑ H product
ΔH = ( 3 × Hc-h + Hc-cl + Hcl-cl ) - ( 2 × Hc-h + 2 × Hc-cl + Hh-cl)
ΔH = ( 3 × 414 + 330 + 243 ) - ( 2 × 414 + 2 × 330 + 431 )
ΔH = - 104 kJ
2. The chemical reaction is :
H₂ + O₂ ---> H₂O₂
The Bond Energy (kJ/mol)
The bond energy, H-H = 436
The bond energy, O=O = 498
The bond energy, O-O = 146
The bond energy, H-O = 463
The enthalpy change is as :
ΔH = ∑ H reactant - ∑ H product
ΔH = ( H-H + O=O ) - ( 2 × O-H + (O-O)
ΔH = ( 436 - 498 ) - (2 ×463 + 146 )
ΔH = - 138 kJ.
To learn more about enthalpy change here
https://brainly.com/question/31979548
#SPJ4
To synthesize polyethylene glycol, or Carbowax [(-CH-CH20-)], which monomer and initiator can be used most efficiently? A. ethylene with radical initiator; B. ethane-1,2-diol with basic initiator; C. 1,2-epoxyethane with basic initiator;
D. ethane-1,2-diol with acidic initiator; E. 1,2-epoxyethane with radical initiator.
The most efficient monomer and initiator combination for synthesizing PEG is 1,2-epoxyethane with a radical initiator.
Polyethylene glycol (PEG) is a synthetic polymer that is produced by polymerizing the monomer ethylene oxide. This is because 1,2-epoxyethane has a higher reactivity towards radical polymerization than ethylene or ethane-1,2-diol. Additionally, a radical initiator is preferred over a basic or acidic initiator as it allows for a greater degree of control over the polymerization reaction. Carbowax, which is a trade name for PEG, is a versatile polymer that is used in a wide range of applications, including pharmaceuticals, cosmetics, and industrial processes. Its properties, such as its high solubility in water and ability to form stable emulsions, make it a valuable material in these industries. In conclusion, the most efficient monomer and initiator combination for synthesizing PEG is 1,2-epoxyethane with a radical initiator.
To know more about monomer visit:
https://brainly.com/question/18784783
#SPJ11
A balloon is filled with 35.0 l of helium in the morning when the temperature is 20.00 oc. by mid-afternoon, the temperature has risen to 34.55 oc. what is the new volume of the balloon?
The new volume of the balloon when the temperature is 34.55°C is approximately 36.85 L.
The temperature increase from 20.00°C to 34.55°C will cause the helium molecules in the balloon to expand, increasing the volume of the balloon. To calculate the new volume, we can use Charles' Law, which states that at constant pressure, the volume of a gas is directly proportional to its temperature in kelvins.
First, we need to convert the temperatures from Celsius to Kelvin. 20.00°C + 273.15 = 293.15 K and 34.55°C + 273.15 = 307.70 K.
Then we can use the formula V1/T1 = V2/T2, where V1 is the initial volume (35.0 L), T1 is the initial temperature in Kelvin (293.15 K), T2 is the final temperature in Kelvin (307.70 K), and V2 is the new volume we are trying to find.
Solving for V2, we get:
V2 = V1 x (T2/T1)
V2 = 35.0 L x (307.70 K/293.15 K)
V2 = 36.85 L
To know more about temperature visit :-
https://brainly.com/question/11464844
#SPJ11
Arrange NABr, NaCI, NaI according to their increasing melting point
The arrangement in increasing melting points would be NaI < NaBr < NaCl.
Arranging NABr, NaCl, and NaI according to their increasing melting points, we need to consider the factors that affect the strength of the ionic bonds between the cation (Na+) and the anion (Br-, Cl-, or I-).
As we move down the halogen group (from Cl to Br to I), the size of the anions increases, resulting in weaker electrostatic attractions between the ions. Therefore, the strength of the ionic bonds decreases, and the melting points generally increase.
Comparing NaBr, NaCl, and NaI, NaCl has the highest melting point. This is because Cl- ions are smaller and more closely packed than Br- and I- ions, leading to stronger ionic bonding.
Next, NaBr has a lower melting point compared to NaCl but higher than NaI. This is because Br- ions are larger than Cl- ions, resulting in weaker ionic bonding.
Finally, NaI has the lowest melting point among the three compounds due to the large size of I- ions, which results in the weakest ionic bonding.
In summary, the arrangement in increasing melting points would be NaI < NaBr < NaCl.
To learn more about ions click here:
brainly.com/question/30797506?
#SPJ11
what is the standard electrode potential for the reaction 2 Cr + 3 pb²⁺ → 3 pb + 2 cr³⁺
The standard electrode potential for the given reaction is -1.03 V.
The standard electrode potential is a measure of the tendency of a half-cell to attract electrons when it is connected to a half-cell containing the standard hydrogen electrode (SHE) under standard conditions. The standard electrode potential is denoted by E° and is measured in volts.
The half-reactions for the given reaction are:
Cr³⁺ + 3 e⁻ → Cr (E° = -0.74 V)
Pb²⁺ + 2 e⁻ → Pb (E° = -0.13 V)
To obtain the overall reaction, we need to reverse the second half-reaction and multiply the first by 3 and the second by 2 to balance the number of electrons:
2 Cr + 3 Pb²⁺ → 3 Pb + 2 Cr³⁺
The standard potential for the overall reaction can be calculated by adding the standard potentials for the half-reactions with appropriate signs:
E° = E°(Cr³⁺/Cr) + E°(Pb²⁺/Pb) * 3/2
E° = (-0.74 V) + (-0.13 V) * 3/2
E° = -1.03 V
Learn more about standard electrode potential here:
https://brainly.com/question/14240930
#SPJ11
What is the H₂: H₂O molar ratio?
Answer:
The mole ratio between O₂ and H₂O is 1molO₂2molH₂O . The mole ratio between H₂ and H₂O is 2molH₂2molH₂O .
Explanation:
Answer:
Explanation:
2molH₂2molH₂O
The reaction of iron(III) chloride with tin(II) chloride, as shown below. 2FeCl3 (aq) + SnCl, (aq) — 2FeCl2 (aq) + SnCl, (aq) has the rate law: W rate = k[FeCl3]? [SnCl2] If the concentration of tin(II) chloride is doubled, how much will the initial rate of the reaction change relative to the original initial rate of reaction? Choose one: It will not change It will double it will triple it will quadruple
The initial rate of the reaction will double if the concentration of tin(II) chloride is doubled.
The rate law of the given reaction indicates that the rate of the reaction is directly proportional to the concentration of tin(II) chloride, [SnCl2], and the concentration of iron(III) chloride, [FeCl3]. Therefore, if the concentration of [SnCl2] is doubled while keeping the concentration of [FeCl3] constant, the rate of the reaction will double as well.
This is because the increased concentration of [SnCl2] will lead to a greater number of effective collisions between the reactant particles, resulting in a higher rate of reaction. Therefore, the initial rate of the reaction will be doubled relative to the original initial rate of reaction.
For more questions like Rate click the link below:
https://brainly.com/question/14977272
#SPJ11
a sample of gas at 310 k occupies 165 ml. what volume (in ml) will the same sample occupy at 250k?
To solve this problem, we can use the combined gas law which states:
(P1V1)/T1 = (P2V2)/T2
where P is pressure, V is volume, and T is temperature. Since the problem doesn't mention pressure, we can assume it's constant and cancel it out of the equation. We are given that the initial temperature is 310K and the initial volume is 165mL. We want to find the final volume when the temperature is 250K. We can set up the equation like this:
(165 mL * 310K) / (250K) = V2
Simplifying the equation, we get:
V2 = (165 mL * 310K) / (250K)
V2 = 203.7 mL
Therefore, the gas sample will occupy 203.7 mL at 250K.
learn more about this
https://brainly.in/question/30620283?referrer=searchResults
#SPJ11
Which of the partial reactions below would occur at the cathode? Key Concept: The anode is where oxidation occurs while reduction occurs at the cathode. Mn2+ (aq) → MnO2(s) N2H5+ (aq) → N2(9) Cl(aq) → CIO"(aq) N2(g) → N2H4(aq)
The reduction reaction would occur at the cathode. Specifically, the partial reaction N₂H₅+ (aq) → N₂(g) would occur at the cathode as it involves the gain of electrons and reduction of the N₂H₅⁺ ion.
An oxidation reaction and a reduction reaction go hand in hand in redox processes. A redox reaction is called that because it involves an oxidising and a reducing substance. Since this means that all chemical reactions that involve a substance losing an electron are redox reactions and they occur in nearly all of chemistry, from synthetic to biological chemistry, the only answer that makes sense is:
N₂H₅+ (aq) → N₂(g)
The negative or reducing portion of the two electrodes reduction is called the anode. It undergoes its own oxidation and contributes electrons to the electrochemical process occurring in the solution. Sacrificial anodes are used to safeguard a variety of structures, including ship hulls, water heaters, pipelines, distribution systems, above-ground tanks, and subterranean tanks.
Learn more about Redox reaction here
https://brainly.com/question/30322738
#SPJ11
What is the hybridization of carbon in each of the following (a)CO32- (b)C2O42-(c) NCO-
(a) The carbon in CO₃²⁻ has sp² hybridization. (b) The carbon in C₂O₄²⁻ has sp³ hybridization. (c) The nitrogen in NCO⁻ has sp hybridization.
To determine the hybridization of an atom, we need to look at the number of electron groups (bonded atoms and lone pairs) around the central atom. The hybridization describes how these electron groups are arranged in space.
(a) In CO₃²⁻, carbon is bonded to three oxygen atoms, and there is one lone pair on the carbon atom. This gives a total of four electron groups, which indicates sp² hybridization.
(b) In C₂O₄²⁻, each carbon atom is bonded to two oxygen atoms and there is a double bond between them. There are also two lone pairs on each carbon atom. This gives a total of four electron groups, which indicates sp³ hybridization.
(c) In NCO⁻, nitrogen is bonded to both carbon and oxygen atoms, and there is a triple bond between nitrogen and carbon. This gives a total of two electron groups, which indicates sp hybridization.
To know more about hybridization, refer here:
https://brainly.com/question/29020053#
#SPJ11
At the beginning of an experiment, a scientist has 352 grams of radioactive goo. After 120 minutes, her sample has decayed to 44 grams. What is the half-life of the goo in minutes?
The half-life of the radioactive goo is approximately 40 minutes.
To determine the half-life of the radioactive goo, we need to use the formula: N(t) = N0 (1/2)^(t/T)
Using these values, we can plug them into the formula and solve for T:
44 = 352 (1/2)^(120/T)
Dividing both sides by 352, we get:
1/8 = (1/2)^(120/T)
log(1/8) = log[(1/2)^(120/T)]
-3 / log(1/2) = 120/T
Simplifying, we get:
T = -120 / log(1/2) * -3
T = 40 minutes
44 = 352 * (1/2)^(120 / half-life)
(44 / 352) = (1/2)^(120 / half-life)
0.125 = (1/2)^(120 / half-life)
Take the logarithm base 0.5 of both sides:
log_0.5(0.125) = 120 / half-life
half-life = 120 / log_0.5(0.125)
half-life ≈ 40 minutes
To know more about radioactive visit :-
https://brainly.com/question/20674691
#SPJ11
how many hydrogen atoms are needed to complete the following hydrocarbon structure? a. 14 b. 12 c. 10 d. 6 e. 8
6 hydrogen atoms are needed to complete the following hydrocarbon structure. Option d is correct.
We need to use the formula for the number of hydrogen atoms in a hydrocarbon structure, which is 2n+2, where n is the number of carbon atoms.
Saturated and unsaturated hydrocarbons vary primarily by the existence of double or triple bonds. Unsaturated hydrocarbons have at least one double or triple bond, while saturated hydrocarbons only have single bonds between carbon atoms. Chemical characteristics like reactivity change due to this variation in bonding. Because the double or triple bond gives a place for chemical reactions to occur, unsaturated hydrocarbons tend to be more reactive than saturated hydrocarbons. Unsaturated hydrocarbons tend to be less reactive and more unstable than saturated hydrocarbons. Because the double bond causes larger intermolecular forces of attraction between the molecules, unsaturated hydrocarbons have higher boiling points than saturated hydrocarbons of identical molecular masses.
a. 14 carbon atoms would require 2(14)+2 = 30 hydrogen atoms
b. 12 carbon atoms would require 2(12)+2 = 26 hydrogen atoms
c. 10 carbon atoms would require 2(10)+2 = 22 hydrogen atoms
d. 6 carbon atoms would require 2(6)+2 = 14 hydrogen atoms
e. 8 carbon atoms would require 2(8)+2 = 18 hydrogen atoms
Therefore, the correct answer is option d, which requires 6 hydrogen atoms.
Learn more about hydrocarbon structure here
https://brainly.com/question/30219121
#SPJ11