This exercise is about Reflection and Mirrors. It explores the relationship between convex mirrors, virtual images, and complex images as well as to object distance d₀.
Any d₀ value greater than 10 for a convex lens will produce a true or real image, while any d₀ value greater than 15 for a complex mirror will produce a real image.
What range of d₀ values will result in a virtual image?Any d₀ number less than 10 for a convex lens will result in a virtual image. Also, any d₀ value less than 15 for a complex mirror will result in a virtual picture.
What range of do values will result in a smaller image?The range of d₀ values that would result in a reduced picture in both lenses and mirrors is:
d₀ > 2 f, where is the Focal length.
Learn more about Reflection and Mirrors at:
https://brainly.com/question/3574225
The _____ acceleration is deceleration
Answer:
hello.
Negative acceleration is also called deceleration.
Explanation:
If the velocity of the object does not change with time, it has zero acceleration.
The wavelengths of visible light vary from about 300 nm to 700 nm. what is the range of frequencies of visible light in a vacuum?
a) 90 hz to 210 hz
b) 9*10^10 hz to 2.1*10 hz
c) 4.28*10^5 hz to 1*10^6 hz
d) 4.29*10^14 hz to 1*10^15 hz
The range of frequencies of visible light in a vacuum with wavelength between 300 nm to 700 nm is determined as 4.29 x 10¹⁴ Hz to 1 x 10¹⁵ Hz.
Frequency of the visible light
The frequency of the visible light is determined by using the following formulas relating speed of light and frequency of light.
c = fλ
where;
c is speed of lightf is frequency of lightλ is the wavelengthFrequency of light at 300 nm wavelengthf = c/λ
f = (3 x 10⁸) / (300 x 10⁻⁹)
f = 1 x 10¹⁵ Hz
Frequency of light at 700 nm wavelengthf = c/λ
f = (3 x 10⁸) / (700 x 10⁻⁹)
f = 4.29 x 10¹⁴ Hz
Thus, the range of frequencies of visible light in a vacuum with wavelength between 300 nm to 700 nm is determined as 4.29 x 10¹⁴ Hz to 1 x 10¹⁵ Hz.
Learn more about frequency of visible light here: https://brainly.com/question/10728818
a
13. Chemical energy is a form of___________
energy.
Answer:
Potential energy.
Explanation:
Batteries are a form of chemical energy which is stored in the bonds of molecules contained within the battery acid, batteries are a form of potential energy making chemical potential energy too.
Which planet moves the fastest and which planet moves slowest? a, b, c, d, e, or f. Explain
A room with translucent windows that include some colored parts. use the drop-down menus the complete the statements about the image. the windowpanes are . the colors of the panes are due to the wavelengths of light that the glass .
(a)The window panes are transparent
(b)The colors of the panes are due to the wavelengths of light that the glass allows to pass through.
What are trasparent glasses?The glasses which allows the light rays to pass through them are called as the transparent glasses.
or visible light is electromagnetic radiation within the portion of the electromagnetic spectrum that is perceived by the human eye.[1] Visible light is usually defined as having wavelengths in the range of 400–700 nanometres (nm),
corresponding to frequencies of 750-420 terahertz, between the infrared (with longer wavelengths) and the ultraviolet (with shorter wavelengths
Hence the window panes are transparent the colors of the panes are due to the wavelengths of light that the glass allows to pass through.
To know more about trasparent glasses follow
https://brainly.com/question/940566
Answer:
The windowpanes are- transparent.
The color of the panes are due to the wavelengths of light that the glass- allows to pass through
Explanation:
What units are appropriate to express specific heat?.
Answer:
The units for specific heat can either be joules per gram per degree (J/goC) or calories per gram per degree
Explanation:
what is the result of ocean acidification
Answer:
Ocean acidification reduces the amount of carbonate, a key building block in seawater. This makes it more difficult for marine organisms, such as coral and some plankton, to form their shells and skeletons, and existing shells may begin to dissolve.
Answer:
The intake of carbon dioxide (CO2) from the atmosphere causes ocean acidification, which is the continual decline in the pH value of the Earth's oceans. The burning of fossil fuels by humans is the primary cause of ocean acidification. The amount of carbon dioxide absorbed by the ocean grows in lockstep with the amount of carbon dioxide in the atmosphere. This causes a sequence of chemical reactions in the seawater, which has a negative impact on the, however, their rine life that lives beneath the surface. Carbonic acid is formed when carbon dioxide dissolves in seawater (H2CO3). The pH value of the ocean surface is estimated to have decreased from approximately 8.25 to 8.14 between 1751 and 1996, representing a nearly 30% increase in H+ ion concentration in the world's oceans (note that the pH scale is logarithmic, so a change of one pH unit equals a tenfold change in H+ ion concentration). The pH of the ocean in 2020 will be 8.1, according to the National Oceanic and Atmospheric Administration.
Explanation:
A metal bar is in the xy-plane with one end of the bar at the origin. a force f⃗ =( 6.88 n )i^+( -2.62 n )j^ is applied to the bar at the point x= 2.88 m , y= 3.70 m .
A metal bar is in the xy-plane with one end of the bar at the origin, [tex]\[r = (3.87 \, \text{m}) \mathbf{i} + (3.21 \, \text{m}) \mathbf{j}\][/tex], [tex]\theta\approx 55.16^\circ\][/tex], magnitude of torque is 22.58 Nm.
a) Position Vector r can be calculated as:
Given:
[tex]\(x = 3.87 \, \text{m}\)[/tex]
y = 3.21 m
The position vector r for the point where the force is applied is:
[tex]\[r = (3.87 \, \text{m}) \mathbf{i} + (3.21 \, \text{m}) \mathbf{j}\][/tex]
b) Magnitude of Torque can be calculated as:
Magnitude of r:
[tex]\[|r| = \sqrt{(3.87 \, \text{m})^2 + (3.21 \, \text{m})^2} \approx 5.019 \, \text{m}\][/tex]
Magnitude of F:
[tex]\[|F| = \sqrt{(6.82 \, \text{N})^2 + (-3.24 \, \text{N})^2}\\\\ \approx 7.610 \, \text{N}\][/tex]
Calculate the dot product of r and F:
[tex]\[r \cdot F = (3.87 \, \text{m}) (6.82 \, \text{N}) + (3.21 \, \text{m}) (-3.24 \, \text{N})\\\\ \approx 16.658 \, \text{N} \cdot \text{m}\][/tex]
Calculate the angle [tex]\(\theta\)[/tex] using the dot product and magnitudes:
[tex]\[\cos(\theta) = \frac{r \cdot F}{|r| \cdot |F|} \\\\= \frac{16.658 \, \text{N} \cdot \text{m}}{(5.019 \, \text{m})(7.610 \, \text{N})}\\\\ \approx 0.5526\][/tex]
[tex]\[\theta \approx \cos^{-1}(0.5526)\\\\ \approx 55.16^\circ\][/tex]
Now calculate the magnitude of the torque using the sine of the angle:
[tex]\[|\tau| = |r| \cdot |F| \cdot \sin(\theta)\\\\ = (5.019 \, \text{m}) (7.610 \, \text{N}) \sin(55.16^\circ)\\\\ \approx 22.58 \, \text{N} \cdot \text{m}\][/tex]
c) Direction of Torque:
According to the right-hand rule, the torque points either into or out of the plane formed by r and F. Its direction is perpendicular to that plane. The sign of the angle determines the precise orientation.
In this case, since [tex]\(\theta \approx 55.16^\circ\)[/tex] is positive (counterclockwise rotation), the torque points out of the plane formed by r and F.
Thus, the direction of the torque is outward from the xy-plane.
For more details regarding torque, visit:
https://brainly.com/question/30338175
#SPJ12
Your question seems incomplete, the probable complete question is:
A metal bar is in the xy-plane with one end of the bar at the origin. A force F=(6.82)i+ -3.24j is applied to the bar at the point x=3.87m , y=3.21m .
What is the position vector r for the point where the force is applied?
a Express your answer in terms of the unit vectors i and j .
b What are the magnitude of the torque with respect to the origin produced by F?
c What are direction of the torque with respect to the origin produced by F?
All things being equal,
in which of the
following locations
would you expect to
find the deepest and
richest topsoil?
B. on a mountain top
A. in the Arctic
C. in a valley
D. on the side of a mountain
Answer:
C. In a valley .
.............................
4. The splashing of a liquid resembles an oscillation. The restoring force in this scenario will be due to which of the following?
Potential energy
Kinetic energy
Gravity
Mechanical energy
Please show all of your work.
Gravity
when liquid splashed and is at the top, the force bringing the liquid back down to the midpoint is gravity. This brings the liquid back to its equilibrium level.
Answer:
Gravity
Explanation:
The splashing of liquid resembles like an oscillation .
The force acting on liquid to pull it down is gravity and the force bouncing it back is caused by normal reaction
Hence gravity is the answerHow many ounces in a cup?
Answer:
8 oz
Explanation:
A 5.0-newton force could have perpendicular components of
Answer:
It can have many set of perpendicular component but the most important one is 3 AND 4
Explanation:
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE
Which will have the greater acceleration rolling down an incline— a bowling ball or a volleyball?
Answer:
Bowling ball
Explanation:
The bowling ball's mass will make it roll down the incline faster than the lighter volleyball.
Have an amazing day!!
Please rate and mark brainliest!!
1. How do you describe the path that the light passes through when it travels?
2. What happens during dispersion of light?
3. What are the different colors of light?
4. Similarly, how are rainbows formed up in the sky?
pls help me if u can
A:
The white light is divided into its component hues - red, orange, yellow, green, blue, and violet - as it passes through the prism. Dispersion is the splitting of visible light into its many hues.
===========================================================B:
Dispersion is the splitting of visible light into its many hues. Each hue is associated with a certain wave frequency, as stated in the Light and Color unit, and different frequencies of light waves bend at different rates while passing through a prism.
============================================================C:
The white light is divided into its component hues - red, orange, yellow, green, blue, and violet - as it passes through the prism. Dispersion is the splitting of visible light into its many hues.
===========================================================D:
The sun and the weather combine to create a rainbow. As it passes from air to denser water, light enters a water droplet, slowing and bending. The light bounces off the interior of the droplet, separating the wavelengths—or colors—that make up the droplet. A rainbow is created as light escapes the droplet.
What is the new period if the pendulum is taken to a planet that has 4 times the mass and 4 times the radius of earth
The new period of the pendulum when it is taken to the new planet is double of its period on Earth.
Period of a pendulumThe period of a pendulum is given by the following formula;
[tex]T = 2\pi \sqrt{\frac{l}{g} }[/tex]
where;
g is acceleration due to gravity of the pendulumL is length of the pendulumAcceleration due to gravity of the new planetThe acceleration due to gravity of the new planet is calculated as follows;
[tex]g_E = \frac{GM_E}{R_E^2} = 9.81 \ m/s^2 \\\\g(new \ planet) = \frac{G(4M_E)}{(4R_E)^2} = \frac{4GM_E}{16R_E^2} = \frac{GM_E}{4R_E^2} = \frac{9.81}{4} = 2.45 \ m/s^2[/tex]
New period of the pendulum[tex]T = 2\pi \sqrt{\frac{l}{g} } \\\\T =\frac{2\pi \sqrt{l} }{\sqrt{g} } \\\\T_1\sqrt{g_1} = T_2\sqrt{g_2} \\\\T_E\sqrt{g_E} = T\sqrt{g} \\\\T = \frac{T_E\sqrt{g_E}}{\sqrt{g} } \\\\T = \frac{T_E \times \sqrt{9.81} }{\sqrt{2.45} } \\\\T = 2T_E[/tex]
Thus, the new period of the pendulum when it is taken to the new planet is double of its period on Earth.
Learn more about period of pendulum here: https://brainly.com/question/26449711
From the top of a tall cliff of height y, a soccer ball is kicked horizontally so that it leaves the cliff with a velocity v. Assuming air friction is negligible, the speed of the ball just before it hits the ground is:
Answer:
[tex]\sqrt{v^{2} + 2\, g\, y}[/tex].
Explanation:
Apply the SUVAT equation [tex]{v_{1}}^{2} - {v_{0}}^{2} = 2\, a\, x[/tex] to the vertical component of the soccer ball's motion to find the vertical velocity right before the ball lands. In this equation:
[tex]v_{1}[/tex] represents the vertical velocity of the ball right before it lands (needs to be found);[tex]v_{0}[/tex] represents the initial vertical velocity of the soccer ball ([tex]0[/tex] in this question since the ball was initially travelling horizontally); [tex]a[/tex] represents the acceleration (equal to [tex]g[/tex] since air friction is negligible);[tex]x[/tex] represents the vertical displacement of this ball (in this question, this vertical displacement is equal [tex]y[/tex], the height of the cliff.)Rearrange this equation to find an expression for the vertical velocity [tex]v_{1}[/tex] in terms of [tex]y[/tex] and [tex]g[/tex]:
[tex]\begin{aligned}v_{1} &= \sqrt{{v_{0}}^{2} + 2\, a\, x} \\ &= \sqrt{2\, g\, y}\end{aligned}[/tex].
Since air friction is negligible, the horizontal velocity of the ball would stay unchanged. Thus, the horizontal velocity of the ball would still be [tex]v[/tex] right before the ball lands.
Notice that these two components of velocity are perpendicular to one another. Thus, find the combined velocity of the ball right before landing could be found using Pythagorean's Theorem:
[tex]\sqrt{v^{2} + {v_{1}}^{2}} = \sqrt{v^{2} + 2\, g\, y}[/tex].
If you have 10 ounces of meat, what percentage of the calories comes from fat if the meat is 90% lean?
Answer:
There are 602 calories in 10 ounces of Ground Beef (85% Lean / 15% Fat). serving sizes of Ground Beef
Explanation:
hope this helps if not please let me now
A force of 25 N is used to push a box along the floor a distance of 3
m. How much work was done?
F = 25 N
s = 3 m
A = ?
A = F * s
A = 25 N * 3 m = 75 J
Answer: 75 J
Uranus and neptune have methane clouds but jupiter and saturn do not. Which factor explains why?.
Answer:
Temperature on Jupiter and Saturn are too high for methane to condense.
Explanation:
However, methane can condense on Uranus and Neptune because they are farther from the sun and hence colder.
Pls answer this questions
10. Wet-cell and Dry-cell batteries have _______ current.
A. Direct
B. Alternating
C. Series
D. Parallel
Answer:
A
Explanation:
Direct because it's still passes electricity through ir
12. Tom has two pendulums with him. Pendulum 1 has a ball of mass 0.1 kg attached to it and has a length of 5 m. Pendulum 2 has a ball of mass 0.5 kg attached to a string of length 1 m. How does mass of the ball affect the frequency of the pendulum? Which pendulum will have a higher frequency and why?
Show all of your work.
According to Hooke 's law
[tex]\\ \rm\rightarrowtail \nu=k\sqrt{\dfrac{\ell}{m}}[/tex]
[tex]\\ \rm\rightarrowtail \nu\propto \dfrac{1}{\sqrt{m}}[/tex]
Hence lower the mass higher the frequency
First ball will have a higher frequencyIf a star is 720 , 000 , 000 , 000 , 000 meters from Earth, how many seconds does it take light to travel from the Earth to the star
Answer:
anywhere between 100000 to about 400000 human years .
Explanation:
Does the buoyant force on a submerged object depend on the volume of the object or on the weight of the object?.
Answer:
The buoyant force on a submerged object depends upon the volume of the object.
Explanation:
A car drives down the road at 6m/s. The tires on the car have a diameter of .7m. How long does it take the car’s tires to complete one full rotation?
The time taken for the car's tires to complete one full rotation when it car drives down the road at 6m/s. The tires on the car have a diameter of .7m. is 0.37 s.
What is time?Time is the measure of the duration of past , present or future event.
To calculate the time taken for the tires to complete one full rotation, we use the formula below.
Formula:
v = 2πr/t............ Equation 1Where:
v = Velocity of the carr = radius of the tiret = timeπ = pie
Make t the subject of the equation
t = 2πr/v............... Equation 2From the question,
Given:
r = 0.7/2 = 0.35 mv = 6 m/sπ = 3.14Substitute these values into equation 2
t = (2×0.35×3.14)/6t = 0.37 s.Hence, The time taken for the car's tires to complete one full rotation is 0.37 s.
Learn more about time here: https://brainly.com/question/4931057
A 100-cm long dipole is excited by a sinusoidally varying current with an amplitude i0=2 a. Determine the time average power radiated by the dipole if the oscillating frequency is 150 mhz
For A 100-cm long dipole is excited by a sinusoidally varying current with an amplitude i0=2 , the time average power radiated is mathematically given as
P=0.1577w
What is the time average power radiated by the dipole if the oscillating frequency is 150 mhz?Generally, the equation for the is mathematically given as
[tex]\lambda =\frac{c}{f}[/tex]
Therefore
[tex]\lambda=\frac{3\times 10^{8}}{10^{6}}[/tex]
lambda=300m
In conclusion, for the power
[tex]P=40\pi^{2}(I_{0})^{2}(\frac{l}{\lambda})^{2}\\\\P=40* (3.14)^{2}\times6^{2} (\frac{1}{300})^{2}[/tex]
P=0.1577w
Read more about Power
https://brainly.com/question/10203153
The time-averaged power radiated by the dipole if the oscillating frequency is 150 MHz is 0.1577 w.
What is wavelength?The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal carried in space or down a wire is defined as the wavelength.
Given that the current is 2 amp, while the frequency is 150 MHz. Therefore, the wavelength can be written as,
[tex]\lambda = \dfrac cf = \dfrac{3 \times 10^8}{10^6} = 300\rm\ m[/tex]
Now, the power can be written as,
[tex]P=40 \pi^2 \times (I_o)^2 \times (\dfrac{l}{\lambda})^2\\\\P = 40 \times \pi ^2 \times 6^2 \times (\dfrac{1}{300})^2\\\\P = 0.1577\rm\ w[/tex]
Hence, the time-average power radiated by the dipole if the oscillating frequency is 150 MHz is 0.1577 w.
Learn more about Wavelength:
https://brainly.com/question/13533093
#SPJ4
does a five pound ball weigh more or less 40000 miles above sea level
It would weigh less bc the higher you are the less gravity there is.
An empty corn silo in the shape of a cylinder is being filled with corn
The percent of the silo filled with corn at 10 hours is 90.98%.
What is silo?Silos are used in order to maximize the grain storage life and preserve them. They are round and tall towers with high capacity for commercial or industrial purposes.
As the silo is in shape of cylinder, volume of the cylinder is
V = πr²h
where r = d/2 = 19/2 =9.5 ft
and h = 32 ft
Substitute the values, we get the volume of silo,
V = 3.14 x (9.5)² x 32 = 9068.32 ft³
The silo is filled with the constant rate. After 10 hours, in silo, the amount of corn will be gone doubled as compared to that of in 5 hours.
Amount of corn after 10 hours = 4125 x 2 = 8250 ft³
Percentage of silo filled in 10 hours = (amount after 10 hrs / total amount) x 100
Substitute the values, we get
=(8250 /9068.32 ) x 100 %
=90.98 %
Thus, the percent of the silo filled with corn at 10 hours is 90.98%.
Learn more about silo.
https://brainly.com/question/15781978
#SPJ4
A piston in an automobile engine is in simple harmonic motion. Its amplitude of oscillation from the equilibrium (centered) position is ±6.83 cm and its mass is 2.708 kg.
Find the maximum velocity of the piston when the auto engine is running at the rate of 3590 rev/min.
Answer in units of m/s.
The maximum velocity of the piston when the auto engine is running at the given speed is 25.68 m/s.
Angular speed of the automobile
The angular speed of the automobile in radian per second is calculated as follows;
ω = 2πN
ω = 2π x (3590 /60 s)
ω = 375.94 rad/s
Maximum velocityThe maximum velocity of the piston is calculated using the following formula;
v(max) = Aω
v(max) = 0.0683 x 375.94
v(max) = 25.68 m/s
Thus, the maximum velocity of the piston when the auto engine is running at the given speed is 25.68 m/s.
Learn more about angular speed here: https://brainly.com/question/6860269
A particle is moving in a circle of radius 2 meters according to the relation (please refer to picture), where Vo is measured in radians and in seconds. The speed of the particle at = 4 seconds is
(A) 13 m/s
(B) 16 m/s
(C) 26 m/s
(D) 52 m/s)
(E) 338 m/s
Answer:
ω = dΘ / dt
dΘ / dt = d (3 t^2 + 2 t) / dt = 6 t + 2
At 4 sec ω = 6 * 4 + 2 = 26 / sec
V = ω * R = 26 / sec * 2 m = 52 m/s