Juan works at a health food store
two hours a day, three days a
week. His weekly pay is $73.50.
About how much does Juan make
per hour?

Give me the right answer and I’ll mark your answer the brainliest

Adam's final payment will be the remaining balance, which is $1,442.72.

To find Adam's final payment, we need to calculate the remaining balance on his loan after 12 months. We can use the simple interest formula:

Interest = Principal × Rate × Time

The interest accrued in 12 months can be calculated as follows:

Interest = Principal × Rate × Time

        = $3,500 × 0.12 × (12/12)   (Since time is given in months)

        = $504

Now, let's calculate the remaining balance:

Remaining Balance = Principal + Interest - Payments made

                = $3,500 + $504 - ($213.44 × 12)

                = $3,500 + $504 - $2,561.28

                = $1,442.72

To know more about payment visit:

brainly.com/question/31514256

#SPJ11

If 3/5 of the total bill was for labor costs and the labor cost was $79.50, we can calculate the total bill (b) by solving the equation (3/5)b = $79.50.

Let's solve the equation to find the total bill (b). We are given that 3/5 of the total bill was for labor costs, which is represented as (3/5)b. We are also given that the labor cost was $79.50.

Using the equation (3/5)b = $79.50, we can solve for b by isolating the variable. To do this, we multiply both sides of the equation by the reciprocal of 3/5, which is 5/3:

(3/5)b * (5/3) = $79.50 * (5/3)

The 5s cancel out, and we are left with:

b = $79.50 * (5/3)

Evaluating the right side of the equation:

b ≈ $132.50

Therefore, the total bill for the repairs on Alonso's car is approximately $132.50.

Learn more about  labor costs here:

https://brainly.com/question/31806503

#SPJ11

A) the angle created by the driver turning is 60°

B) the driver who turned left into 2nd street created an angle of 120°

C) the driver who turned right onto 2nd street made an angle of 120°

a) The driver on 4th Street negotiated an angle that was opposite ∠60° shown above. Since opposite angles are equal in geometry, thence the agle created is 60°

b) The diver travelling southwest on Marvin Avenue created an 120° because the angle created is corresponding to the angle which is supplementary to 60°.

Since supplementary angles sum up to 180°

Hence 180-60 = 120°

c) The angle in this case is 120° because the angle created is opposite the one created in B above. recall that opposite angles are congruent.

Learn more about angles:
https://brainly.com/question/25716982
#SPJ9

the ratio test is inconclusive. We cannot determine whether the series converges or diverges using this test alone.

We can use the ratio test to determine whether the series [infinity] cos(n/3) n! n = 1 converges or diverges. The ratio test states that if

lim (n → ∞) |a_{n+1}/a_n| < 1,

then the series converges absolutely. If the limit is greater than 1, the series diverges. If the limit is equal to 1, the test is inconclusive.

Let's apply the ratio test to the given series. We have:

|a_{n+1}/a_n| = |cos((n+1)/3) (n+1)! / (n cos(n/3) n!)|

Canceling the n! terms, we get:

|a_{n+1}/a_n| = |(n+1) cos((n+1)/3) / cos(n/3)|

Now, taking the limit as n → ∞, we get:

lim (n → ∞) |a_{n+1}/a_n| = lim (n → ∞) |(n+1) cos((n+1)/3) / cos(n/3)|

Since cos((n+1)/3) and cos(n/3) are both bounded between -1 and 1, we can ignore them and focus on the ratio of the n+1 and n terms. We get:

lim (n → ∞) |(n+1) / n| = 1

To learn more about diverges visit:

brainly.com/question/31383099

#SPJ11

The solution to the given initial-value problem using Laplace transform is:
y(t) = (-2/17) + (3/17)e^(-4t)sin(3t) - (2/17)e^(-4t)cos(3t), where y(0) = 0 and y'(0) = 0.

To solve this initial-value problem using Laplace transform, we first take the Laplace transform of both sides of the equation:

L{y''} + 8L{y'} + 17L{y} = L{(t-2)}

Applying the properties of Laplace transform, we get:

s²Y(s) - s*y(0) - y'(0) + 8sY(s) - 8y(0) + 17Y(s) = 1/s² - 2/s

Using the initial conditions y(0) = 0 and y'(0) = 0, we simplify the above equation to:

s²Y(s) + 8sY(s) + 17Y(s) = 1/s² - 2/s

Factoring out Y(s), we get:

Y(s) = 1/(s²(s² + 8s + 17)) - 2/(s(s² + 8s + 17))

We now need to decompose the rational expression into partial fractions. To do so, we use the quadratic formula to find the roots of the denominator:

s² + 8s + 17 = 0

s = (-8 ± √(8² - 4*1*17))/(2*1)

s = -4 ± 3i

Therefore, we can write:

Y(s) = A/s + (B + Cs)/(s² + 8s + 17)

To find the constants A, B, and C, we multiply both sides by the denominators and equate coefficients of like terms. After some algebraic manipulations, we get:

A = -2/17
B = -2/17
C = 3/17

Substituting these values back into Y(s), we get:

Y(s) = -2/(17s) - (2+3s)/(17(s² + 8s + 17))

Taking the inverse Laplace transform of Y(s), we get the solution to the initial-value problem:

y(t) = (-2/17) + (3/17)e^(-4t)sin(3t) - (2/17)e^(-4t)cos(3t)

To know more about initial-value problem, refer to the link below:

https://brainly.com/question/28168111#

#SPJ11

Answer: -0.3

Step-by-step explanation:

When considering two nonnegative numbers p and q such that p+q=6, the difference between the maximum and minimum of the quantity (p^2q^2)/2 is 81 - 0 = 81.

To find the maximum and minimum of the quantity (p^2q^2)/2, we can use the AM-GM inequality.
AM-GM inequality states that for any nonnegative numbers a and b, (a+b)/2 ≥ √(ab).

So, in our case, we can write:
(p^2q^2)/2 = (p*q)^2/2

Let x = p*q, then we have:
(p^2q^2)/2 = x^2/2
Since p and q are nonnegative, we have x = p*q ≥ 0.

Using the AM-GM inequality, we have:
(x + x)/2 ≥ √(x*x)
2x/2 ≥ x
x ≥ 0
So, the minimum value of (p^2q^2)/2 is 0.
To find the maximum value, we need to use the fact that p+q=6.

We can rewrite p+q as:
(p+q)^2 = p^2 + 2pq + q^2
36 = p^2 + 2pq + q^2
p^2q^2 = (36 - p^2 - q^2)^2

Substituting this into the expression for (p^2q^2)/2, we get:
(p^2q^2)/2 = (36 - p^2 - q^2)^2/2
To find the maximum value of this expression, we need to maximize (36 - p^2 - q^2)^2.

Since p and q are nonnegative and p+q=6, we have:
0 ≤ p, q ≤ 6
So, the maximum value of (36 - p^2 - q^2) occurs when p=q=3.

Thus, the maximum value of (p^2q^2)/2 is:
(36 - 3^2 - 3^2)^2/2 = 81

Therefore, the difference between the maximum and minimum of (p^2q^2)/2 is:
81 - 0 = 81.

Learn more about maximum and minimum of the quantity:

https://brainly.com/question/29671614

#SPJ11

The correct answer is (c) approximately normal for large samples.

The central limit theorem states that as the sample size increases, the sampling distribution of the sample mean approaches a normal distribution, regardless of the shape of the population distribution. In the case of the difference of two sample means (x1 - x2), the central limit theorem still applies, and the distribution becomes approximately normal as the sample size (n) increases. Therefore, for large sample sizes, the sampling distribution of (x1 - x2) can be approximated by a normal distribution, and the properties of the normal distribution can be used to make statistical inferences about the population mean difference.

Learn more about normal here

https://brainly.com/question/4079902

#SPJ11

The Laplace transform of a given function, f(t), is denoted by L{f(t)} and can be determined using Table 7.1 and the properties from Table 7.2.

For the given function, f(t) = 12 + [tex]e^t[/tex] × sin(2t), we will use the linearity property and the trigonometric identity.
First, apply the linearity property: L{12 + [tex]e^t[/tex]  sin(2t)} = L{12} + L{[tex]e^t[/tex] × sin(2t)}.
Next, using Table 7.1, find the Laplace transform of each term:
1. L{12} = 12 × L{1} = 12/s
2. L{[tex]e^t[/tex] × sin(2t)} = [tex]e^{(-s)}[/tex]× L{sin(2t)} = (2 /[tex](s^2 + 4)[/tex]) × [tex]e^{(-s)}[/tex]
Now, combine the transforms: L{12 + [tex]e^t[/tex] × sin(2t)} = 12/s + (2 / ([tex]s^2[/tex] + 4)) × [tex]e^{(-s)}[/tex].

Learn more about linearity here:

https://brainly.com/question/29281420

#SPJ11

The power series expansion of f(x) = 4x^2 - 39x + 98 around 5 is f(x) ≈ 3 + (x-5) + 4(x-5)^2.

To expand f(x)=4x^2-39x+98 as a power series around 5, we need to use the formula for a power series:

f(x) = ∑(n=0 to infinity) [f^(n)(a)/n!] * (x-a)^n

where f^(n)(a) represents the nth derivative of f(x) evaluated at x=a. In this case, a=5.

To find the derivatives of f(x), we can use the power rule and the constant multiple rule:

f'(x) = 8x - 39
f''(x) = 8
f'''(x) = 0
f''''(x) = 0
...

Notice that the derivatives beyond the second derivative are all zero. This is because f(x) is a quadratic function, so all higher-order derivatives are zero.

Now we can plug these derivatives into the formula for the power series:

f(x) = f(5) + f'(5)*(x-5) + (f''(5)/2!)*(x-5)^2 + ...

f(5) = 4(5)^2 - 39(5) + 98 = -23

f'(5) = 8(5) - 39 = 1

f''(5) = 8

So the power series expansion of f(x) around x=5 is:

f(x) = -23 + (x-5) + 4/2!*(x-5)^2 + 0*(x-5)^3 + 0*(x-5)^4 + ...

Simplifying this expression, we get:

f(x) = -23 + (x-5) + 2(x-5)^2 + ...

And that's the power series expansion of f(x) around x=5!
Hi! To expand the function f(x) = 4x^2 - 39x + 98 as a power series around 5, we will use the Taylor series expansion formula:

f(x) = f(a) + f'(a)(x-a) + (f''(a)/2!)(x-a)^2 + ...

where a = 5. First, let's find the derivatives of f(x):

f(x) = 4x^2 - 39x + 98
f'(x) = 8x - 39
f''(x) = 8

Now, we'll evaluate the derivatives at a = 5:

f(5) = 4(5)^2 - 39(5) + 98 = 100 - 195 + 98 = 3
f'(5) = 8(5) - 39 = 40 - 39 = 1
f''(5) = 8

Finally, we'll plug these values into the Taylor series expansion formula:

f(x) ≈ 3 + 1(x-5) + (8/2!)(x-5)^2
f(x) ≈ 3 + (x-5) + 4(x-5)^2

So, the power series expansion of f(x) = 4x^2 - 39x + 98 around 5 is f(x) ≈ 3 + (x-5) + 4(x-5)^2.

To know more about derivative visit:

https://brainly.com/question/28376218

#SPJ11

Answer:

Therefore, Juan will pay $2.22 in sales tax.

Step-by-step explanation:

To find the amount of tax Juan will pay, we can first calculate 8% of the price of the dollhouse, and then round to the nearest cent.

8% of $27.75 = 0.08 × $27.75 = $2.22

Therefore, Juan will pay $2.22 in sales tax.

True. The given equation E(XY) - Mx Hy = E[(x - Ux)(Y - Hy)] represents the covariance formula.

Covariance measures the degree to which two random variables, X and Y, change together. In this equation, E(X) is represented as Hx, and E(Y) is represented as My. The covariance can be calculated by subtracting the product of the means of X and Y (Mx Hy) from the expected value of their product (E(XY)), which is equivalent to the expected value of the product of their deviations from their respective means, E[(x - Ux)(Y - Hy)].

The left side of the equation is the formula for calculating the covariance using the expected values of X and Y (Hx and Hy) and the expected value of their product (E(XY)). The right side of the equation is an equivalent formula for the covariance that expands into the product of two binomials (x - Ux) and (Y - Hy) and takes the expected value of their product. Therefore, both sides of the equation represent the same thing and the statement is true.

know more about covariance here

https://brainly.com/question/2618552

#SPJ11

We can be 90% confident that the true mean claim payment for the population of insurance claims is between $1522.30 and $1567.70.

First, let's find the critical value Zα/2. Since we want a 0.90 confidence interval, we need to find the Z-score that corresponds to an area of 0.05 in the right tail of the standard normal distribution. Using a Z-table or a calculator, we find that Zα/2 = 1.645.

Next, we plug in the given values:

x = $1545

σ = $248

n = 366

Zα/2 = 1.645

CI = $1545 ± 1.645 * ($248/√366)

Simplifying the expression inside the parentheses, we get:

CI = $1545 ± $22.70

The 90% confidence interval for the mean claim payment is:

CI = ($1522.30, $1567.70)

Learn more about confidence interval on

https://brainly.com/question/15712887

#SPJ4

To sketch several levels of the function \(f(x, y) = e^x y\), we can plot contour lines corresponding to different function values. Each contour line represents points in the xy-plane where the function takes a constant value.

Here is a sketch showing contour lines for various levels of \(f(x, y) = e^x y\):

```

   |          _______________

   |        _/                |

   |      _/                   |

   |     /                      \

   |    |                        |

   |    |                        |

   |    |                        |

   |     \                      /

   |      \                    /

   |          \______/

   |

   +--------------------------------

```

Each contour line corresponds to a different level of \(f(x, y)\). The lines get closer together as we move away from the origin, indicating an exponential growth pattern.

Please note that the sketch is a rough representation and may not accurately reflect the precise shape and spacing of the contour lines.

To know more about exponential function , refer here :

https://brainly.com/question/15352175#

#SPJ11

Answer:

Step-by-step explanation: The speed of reaction to differences between forecasts and actual results. is the answer i think

Tighter border security on aggregate supply would depend on other factors, such as the availability of domestic workers and the demand for goods and services.

Minimum wage laws can increase the cost of production for firms, which can lead to a decrease in the aggregate supply of goods and services.

This is because firms may have to pay higher wages to their workers, which can increase their costs and reduce their profit margins. As a result, firms may reduce their output, leading to a decrease in aggregate supply.

Social security payroll taxes can also increase the cost of production for firms, as they are required to pay a portion of their employees' wages into the social security system.

This can lead to a decrease in aggregate supply for the same reasons as minimum wage laws.

Social security retirement benefits can increase the supply of labor, as workers may choose to retire earlier if they are eligible for retirement benefits.

This can lead to an increase in aggregate supply, as there may be more workers available to produce goods and services.

Tighter border security can decrease the supply of labor, as fewer immigrants may be able to enter the country to work.

This can lead to a decrease in aggregate supply, as there may be fewer workers available to produce goods and services.

For similar questions on Security

https://brainly.com/question/21325358

#SPJ11

(a) Minimum wage laws can increase production costs for firms, resulting in a leftward shift of the short-run aggregate supply curve, as firms must pay higher wages to their workers. This can lead to higher prices and lower output levels.

(b) Social security payroll taxes can increase labor costs for firms, leading to a leftward shift of the short-run aggregate supply curve. This can cause a decrease in output levels and an increase in prices.

(c) Social security retirement benefits can increase consumer spending, leading to an increase in aggregate demand, and as a result, a rightward shift of the aggregate supply curve. This can lead to higher output levels and potentially higher prices in the long run.

(d) Tighter border security can decrease the supply of labor, causing a leftward shift of the short-run aggregate supply curve. This can lead to higher wages and higher prices, resulting in lower output levels.

Learn more about Minimum wage laws here: brainly.com/question/21595450

#SPJ11

The value of the integral is 640V. we integrate with respect to r:

∫0^4 10Vr^2 r dr = (10/4)(4^4)V = 640V

To evaluate the integral of Vx^2 + y^2 dV over the given region E, we can use cylindrical coordinates since the region lies inside a cylinder.

First, we need to determine the limits of integration for each variable. For z, the limits are -4 to 6, since the region is between the planes z=-4 and z=6. For the cylindrical coordinates, we know that x^2 + y^2 = r^2, so the cylinder can be represented by r = 4. Therefore, the limits for r are 0 to 4, and the limits for theta are 0 to 2π.

Substituting in the cylindrical coordinates into the integral, we get:

∫∫∫E Vr^2 r dz dθ dr

= ∫0^2π ∫0^4 ∫-4^6 Vr^2 r dz dr dθ

Since the integral does not depend on theta or z, we can evaluate them first. The integral with respect to z gives:

∫-4^6 Vr^2 r dz = 10Vr^2 r

Next, we integrate with respect to r:

∫0^4 10Vr^2 r dr = (10/4)(4^4)V

= 640V

Therefore, the value of the integral is 640V.

To know more about integral refer to

https://brainly.com/question/18125359

#SPJ11

Thus, this recursive definition means that we can generate an infinite number of positive integers that have a 3 as at least one of its digits by starting with 3 and repeatedly adding a 3 to the end of the previous integer.

A recursive definition is a definition that refers to itself in its own definition. In this case, we want to create a recursive definition for the set of all positive integers that have a 3 as at least one of its digits.

Let's begin by defining the base case, which is the smallest possible integer that has a 3 as one of its digits.

Know more about the recursive definition

https://brainly.com/question/11558617

#SPJ11

To calculate the cost of producing 10 tacos, you will need to consider the cost of all the ingredients and supplies required to make them. This may include tortillas, meat, cheese, lettuce, tomatoes, spices, cooking oil, and any other toppings you plan to use.

Once you have determined the total cost of these items, you can divide it by the number of tacos you are producing to get the cost per taco. To ensure accuracy, it is recommended that you round your final answer to the nearest hundredths place. This means that if your cost per taco is $2.345, you would round it to $2.35. By calculating the cost of producing 10 tacos, you can determine how much you need to charge for each taco to ensure that you make a profit.

To learn more total cost about click here, brainly.com/question/31115209

#SPJ11

The value of x in the given figure is √121 - a² by pythagoras theorem.

By Pythagoras theorem we have to find the value of x

In a right-angled triangle, the square of the hypotenuse side is equal to the sum of squares of the other two side

x²+a²=11²

x²+a²=121

x² = 121 - a²

Take square root on both sides

value of x=√121 - a²

Hence, the value of x in the given figure is √121 - a² by pythagoras theorem.

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ1

the area of the shaded region is 0.8588 rounded to 4 decimal places.

To solve these problems, we will use the standard normal distribution, which is a normal distribution with mean 0 and standard deviation 1. We can convert any normal distribution to a standard normal distribution by using the formula:

Z = (X - μ) / σ

where X is a random variable from the normal distribution with mean μ and standard deviation σ, and Z is the corresponding value from the standard normal distribution.

To find the probability that X is greater than 15.2, we need to find the corresponding probability from the standard normal distribution. First, we convert 15.2 to a Z-score:

Z = (15.2 - 15.2) / 0.9 = 0

Since the standard normal distribution is symmetric around 0, the probability of Z being greater than 0 is equal to the probability of Z being less than 0. Therefore, the probability that X is greater than 15.2 is:

P(Z > 0) = 0.5

So the probability is 0.5000 rounded to 4 decimal places.

To find the probability that X is between 14.3 and 16.1, we first convert these values to Z-scores:

Z1 = (14.3 - 15.2) / 0.9 = -1

Z2 = (16.1 - 15.2) / 0.9 = 1

Next, we find the probability of Z being between -1 and 1 using a standard normal distribution table or calculator:

P(-1 < Z < 1) = 0.6827

So the probability is 0.6827 rounded to 4 decimal places.

The shaded region on the standard normal distribution graph is bounded by -1.13 on the left, 2.26 on the right, and the horizontal axis on the bottom. To find the area of this region, we can calculate the probability of Z being between -1.13 and 2.26:

P(-1.13 < Z < 2.26) = P(Z < 2.26) - P(Z < -1.13)

Using a standard normal distribution table or calculator, we can find that:

P(Z < 2.26) = 0.9880

P(Z < -1.13) = 0.1292

Therefore,

P(-1.13 < Z < 2.26) = 0.9880 - 0.1292 = 0.8588

To learn more about distribution visit:

brainly.com/question/31197941

#SPJ11

Based on the results from the linear program, the optimal solution shows that Aunt Anastasia should produce 20 baskets and 10 eggs, as the rabbits are already fixed at 25 due to her commitment to the charitable organization.

The optimal value of the objective function (profit) is $60, which is the maximum profit that can be earned by producing 20 baskets and 10 eggs subject to the given constraints. It is not recommended for Aunt Anastasia to make all three products as the linear program indicates that the optimal solution only involves producing two of the three products, and the profit obtained from producing all three products would be less than the profit obtained from producing baskets and eggs only. Therefore, the recommended products for Aunt Anastasia to make for the spring are baskets and eggs.

To know more about optimal solution,

https://brainly.com/question/31519501

#SPJ11

The inequalities that we are solving here are:20 + 4x ≤ 17 or 5x − 9 > −4.

Solution:

When we solve the inequalities, the first step is to isolate the variable to one side of the equation.

Let's solve for 20+4x ≤ 17:20 + 4x ≤ 17

We can simplify this inequality by subtracting 20 from both sides:20 - 20 + 4x ≤ 17 - 20

Simplifying:4x ≤ -3Dividing both sides by 4:4x/4 ≤ -3/4x ≤ -3/4

So, the solution to the inequality 20 + 4x ≤ 17 is:x ≤ -3/4

Now, let's solve the second inequality 5x − 9 > −4:5x − 9 > −4

We can simplify this inequality by adding 9 to both sides:5x - 9 + 9 > -4 + 95x > 5

Dividing both sides by 5:5x/5 > 5/5x > 1

So, the solution to the inequality 5x − 9 > −4 is:x > 1

We can combine the solutions to both inequalities as follows:x ≤ -3/4 or x > 1

Thus, the solution to the inequalities 20 + 4x ≤ 17 or 5x − 9 > −4 is x ≤ -3/4 or x > 1.

To know more about inequalities, visit

https://brainly.com/question/20383699

#SPJ11

This problem is known as 2-SAT, and it can be solved efficiently using algorithms such as the strongly connected components algorithm.

The 2-SAT problem is a special case of the more general Boolean satisfiability problem (SAT), where each clause contains an arbitrary number of literals. However, in the 2-SAT problem, each clause contains exactly two literals, which makes it easier to solve.

To solve the 2-SAT problem, we can construct a directed graph where each literal x is represented by two vertices: x and not(x). For each clause (a OR b), we add two directed edges: not(a) -> b and not(b) -> a. This graph is called the implication graph, and it encodes the logical relationships between the literals.

Next, we identify the strongly connected components of the implication graph. If a literal x and its negation not(x) belong to the same strongly connected component, then the 2-SAT problem is unsatisfiable, because there is no way to assign values to x and not(x) that make both true.

If all the literals x belong to different strongly connected components, then we can assign a truth value to each literal x based on its position in the depth-first search ordering of the implication graph. Specifically, if x comes before not(x) in the ordering, we assign x to true, and if not(x) comes before x, we assign x to false. This assignment satisfies all the clauses of the 2-SAT problem, because for each clause (a OR b), at least one of the literals a and b must be true, and the other literal can be false.

Learn more about problem  here:

https://brainly.com/question/30482060

#SPJ11

From central limit theorem, in a sample

a) the sampling distribution of x is normal distribution.

b) The value of P(x>91.3) is equals to the 0.093418.

From the central limit theorem, when the samples of a population are considered then these generate a normal distribution of their own. The sample size must be equal to or higher than 30 in order for the central limit theorem to be true. We have a simple random sample obtained from population with the Sample size, n = 36

Population is skewed right with population mean, µ= 87

Standard deviations, σ = 24

We have to determine the sampling distribution of x.

a) As we see sample size, n = 36 > 30, so the sampling distribution is normal distribution.

b) Using the test statistic value for normal distribution, [tex]z= \frac{ x - \mu }{\frac{\sigma}{\sqrt{n}}} [/tex]. Here, x = 91.3, µ= 87, σ = 24, n = 36. Now, the probability value is, P(x>91.3)

= [tex]P( \frac{ x - \mu }{\frac{\sigma}{\sqrt{n}}} < \frac{ 91.3 - 87 }{\frac{24}{\sqrt{36}}}) [/tex]

= [tex]P(z < \frac{ 4.3}{\frac{24}{6}} )[/tex]

= [tex]P(z < \frac{ 4.3}{4} )[/tex]

= [tex]P(z < 1.32)[/tex]

Using the p-value calculator, the value P(z < 1.32) is equals to the 0.093418. So, P( x < 91.3 ) = 0.093418. Hence, required value is 0.093418.

For more information about central limit theorem,

https://brainly.com/question/13652429

#SPJ4

Complete question:

A simple random sample of size n=36 is obtained from a population that is skewed right with µ=87 and σ=24.

(a) describe the sampling distribution of x.

b) What is P(x>91.3)?

The value of the given integral is (125π/6) - (25/3)√(6).

To evaluate the integral:

∫∫R √(25 - x² - y²) dA

R is the region in the first quadrant enclosed by the circle x² + y² = 25.

To change to polar coordinates, we make the substitutions:

x = r cos(θ)

y = r sin(θ)

r is the radius and θ is the angle from the positive x-axis to the point (x, y).

The region R can be described in polar coordinates by:

0 ≤ r ≤ 5

0 ≤ θ ≤ π/2

The integral becomes:

∫∫R √(25 - x² - y²) dA

= ∫(0 to π/2) ∫(0 to 5) √(25 - r²) r dr dθ

We can evaluate the inner integral first:

∫(0 to 5) √(25 - r²) r dr = [- (1/3) (25 - r²)^{(3/2)}]|(0 to 5) = (125/3) - (25/3)√(6)

Substituting this into the original integral and evaluating the outer integral, we get:

∫(0 to π/2) (125/3 - (25/3)√(6)) dθ = (125π/6) - (25/3)√(6)

For similar questions on integral

https://brainly.com/question/22008756

#SPJ11

The mean absolute deviation (MAD) of the given data set is approximately 25627.5.

Calculating the mean (average) of the data set.

Mean = (343434 + 292929 + 393939 + 343434) / 4

Mean = 1375736 / 4

Mean = 343934

Calculating the deviation of each data point from the mean.

Deviation for Cortland apple tree = |343434 - 343934| = 500

Deviation for Red Delicious apple tree = |292929 - 343934| = 51005

Deviation for Empire apple tree = |393939 - 343934| = 50005

Deviation for Fuji apple tree = |343434 - 343934| = 500

Calculating the mean of the absolute deviations.

MAD = (500 + 51005 + 50005 + 500) / 4

MAD = 102510 / 4

MAD = 25627.5

Therefore, the mean absolute deviation (MAD) of the given data set is approximately 25627.5.

Learn more about mean absolute deviation at https://brainly.com/question/30090967

#SPJ1

We found the dB gain to be 18.1 dB and 17.1 dB, respectively.

To find the dB gain for a sound, we can use the following formula:

dB gain = 10 log (final power/initial power)

For the first scenario, the initial power is 3.2 × 10^−13 watts/cm2 and the final power is 2.3 × 10^−11 watts/cm2. Plugging these values into the formula, we get:

dB gain = 10 log (2.3 × 10^−11/3.2 × 10^−13)
dB gain = 10 log (71.875)
dB gain = 18.1 dB (rounded to one decimal place)

Therefore, the dB gain for the noise in the dormitory increasing from 3.2 × 10^−13 watts/cm2 to 2.3 × 10^−11 watts/cm2 is 18.1 dB.

For the second scenario, the initial power is 6.1 × 10^−8 watts/cm2 and the final power is 3.2 × 10^−6 watts/cm2. Plugging these values into the formula, we get:

dB gain = 10 log (3.2 × 10^−6/6.1 × 10^−8)
dB gain = 10 log (52.459)
dB gain = 17.1 dB (rounded to one decimal place)

Therefore, the dB gain for the motorcycle increasing from 6.1 × 10^−8 watts/cm2 to 3.2 × 10^−6 watts/cm2 is 17.1 dB.

In summary, we can calculate the dB gain for a sound by using the formula: dB gain = 10 log (final power/initial power). The answer is expressed in decibels (dB) and represents the increase in power of the sound. For the given sounds, we found the dB gain to be 18.1 dB and 17.1 dB, respectively.

Learn more dB gain here:

https://brainly.com/question/15209227

#SPJ11

a. distance should not directly affect the performance variable. b. A valid IV can be a challenging task and requires careful consideration of the underlying causal mechanisms and potential confounding factors.

a. In order for distance to be an instrumental variable (IV) for attendance, it must be (i) correlated with attendance, and (ii) uncorrelated with the error term (u) in the attendance equation. Additionally, distance should not directly affect the performance variable.

b. If attendance is correlated with the error term (u) in the attendance equation, then the interaction term between GPA and attendance will also be correlated with u. A possible IV for the interaction term could be a measure of how easily accessible the lecture notes are to the students. If there is a system in place that allows students to access lecture notes online or through a library, then students with lower attendance may still have access to the material covered in the lectures and may perform better if they have good GPA. Thus, this variable may be a good IV for the GPA*attendance term. However, it should be noted that finding a valid IV can be a challenging task and requires careful consideration of the underlying causal mechanisms and potential confounding factors.

Learn more about variable here

https://brainly.com/question/28248724

#SPJ11

The weighted aggregate index of 1996 is 662.05.

Given: Table 1: The prices of unit values of commodities A, B, C, and D in 1994 and 1996 were as follows;

Commodities 1994 1996 Weights A 500 600 7 B 1000 1200 2 C 700 800 3 D 500 700 6 Taking 1994 as a base year.

We need to find: (i) Price relatives for commodities A, B, C, and D, hence the simple price index of 1996. (ii) Simple aggregate index of 1996. (iii) The weighted aggregate index of 1996.

Hence the simple price index of 1996, Calculation for

(i) Price Relatives for Commodities A, B, C, and D

(ii) Simple Aggregate Index of 1996:

The calculation for (ii): Simple Aggregate Index of 1996

(iii) The Weighted Aggregate Index of 1996:

The calculation for (iii): Weighted Aggregate Index of 1996

Therefore, the weighted aggregate index of 1996 is 662.05.

To learn about the weighted aggregate index here:

https://brainly.in/question/27789193

#SPJ11