Kylie measured the length, x, of each the insects she found underneath a rock. She recorded the lengths in the table below.
Calculate an estimate of the mean length of the insects she found.
Give your answer in millimetres(mm)

When a number is multiplied by 6 before subtracting from 66, the result obtained is the same as four times the sum of the number and 4, then the  number is 5.

According to the problem, "When a number is multiplied by 6 before subtracting from 66, the result obtained is the same as four times the sum of the number and 4."

To express this mathematically, we can set up the following equation:

6x subtracted from 66 equals 4 times the sum of x and 4.

Mathematically, this can be written as:

66 - 6x = 4(x + 4)

Now, let's solve this equation step by step to find the value of x.

Distribute the 4 on the right side of the equation:

66 - 6x = 4x + 16

Simplify the equation by combining like terms:

-6x - 4x = 16 - 66

-10x = -50

Divide both sides of the equation by -10 to isolate the variable x:

x = (-50) / (-10)

x = 5

To know more about multiply here

https://brainly.com/question/30875464

#SPJ4

The simplest form of the expression( 4m- 17)/( m2- 16)( 3m- 11)/( m2- 16) is 7/( m 4), which corresponds to optionA.    

To simplify the expression( 4m- 17)/( m2- 16)( 3m- 11)/( m2- 16), we can combine the  fragments by chancing  a common denominator and  also simplifying.    The common denominator in this case is( m2- 16) because both  fragments have the same denominator.  

Now, let's simplify the numerators  For the first bit,( 4m- 17), there's no simplification possible.  For the alternate bit,( 3m- 11), there's no common factor to simplify.    Combining the  fragments with the common denominator, we have ( 4m- 17)/( m2- 16)( 3m- 11)/( m2- 16) = ( 4m- 17 3m- 11)/( m2- 16)    Simplifying the numerator by combining like terms, we get ( 7m- 28)/( m2- 16)    

Now, let's further simplify the numerator and denominator. We can factor out a common factor of 7 from the numerator  7( m- 4)/( m2- 16)    Next, let's factor the denominator as a difference of places ( m- 4)/(( m- 4)( m 4))    

Eventually, we can cancel out the common factor of( m- 4) in the numerator and denominator /( m 4)    thus, the simplest form of the expression( 4m- 17)/( m2- 16)( 3m- 11)/( m2- 16) is 7/( m 4), which corresponds to optionA.

For more questions on simplest .

https://brainly.com/question/30231497

#SPJ8

The distance between the two hydrogen atoms in a hydrogen molecule is not fixed and tends to oscillate. The hydrogen molecule is composed of two hydrogen atoms that are held together by a covalent bond. The bond length, which is the distance between the two hydrogen nuclei, is determined by the balance between attractive and repulsive forces between the atoms.

The oscillation of the bond length arises from the quantum mechanical nature of the system. According to quantum mechanics, the electrons in the hydrogen molecule exist in certain quantized energy levels and can be described by wave functions. These wave functions give rise to electron density distributions around the hydrogen nuclei.

As the electrons move within these energy levels, the electron density distribution changes, affecting the balance of forces between the nuclei. This leads to fluctuations in the bond length. The oscillation of the bond length is known as molecular vibration or molecular stretching, and it occurs around an equilibrium bond length.

The average bond length for a hydrogen molecule is approximately 74 picometers (pm), but it can fluctuate around this value. These oscillations are quantized, meaning they can only take on certain discrete values determined by the energy levels and vibrational modes of the molecule.

To know more about hydrogen molecule refer to-

https://brainly.com/question/31485826

#SPJ11

The statement P(1) is that 1³ = ((1(1+1))/2)² is true.

To show P(1) is true, calculate the right side: ((1(1+1))/2)² = ((1(2))/2)² = (1)² = 1. Since 1³ = 1, P(1) is true, completing the base of the induction.

The inductive hypothesis is assuming P(k) is true for some positive integer k, meaning 1³ + 2³ + 3³ + ... + k³ = ((k(k+1))/2)².

In the inductive step, we need to prove that P(k+1) is true, meaning 1³ + 2³ + 3³ + ... + k³ + (k+1)³ = (((k+1)((k+1)+1))/2)².

To complete the inductive step, start with the inductive hypothesis and add (k+1)³ to both sides: 1³ + 2³ + 3³ + ... + k³ + (k+1)³ = ((k(k+1))/2)² + (k+1)³. Then, show this is equal to (((k+1)((k+1)+1))/2)², proving P(k+1) is true.

To know more about inductive hypothesis click on below link:

https://brainly.com/question/31703254#

#SPJ11

A cross section parallel to the base is a rectangle measuring 15 inches by 8 inches. A cross section perpendicular to the base through the midpoints of the 8-inch sides is a rectangle measuring 6 inches by 15 inches. The correct options are 1, 3, and 4.

A cross section parallel to the base is a rectangle measuring 15 inches by 8 inches. This option is correct. If a cross section is taken parallel to the base of the right rectangular prism, it will result in a rectangle with the same dimensions as the base, which is 15 inches by 8 inches.

A cross section perpendicular to the base through the midpoints of the 8-inch sides is a rectangle measuring 6 inches by 15 inches. This option is correct. If a cross section is taken perpendicular to the base through the midpoints of the 8-inch sides, it will result in a rectangle with dimensions of 6 inches by 15 inches.

A cross section perpendicular to the base through the midpoints of the 8-inch sides is a rectangle measuring 4 inches by 15 inches. This option is incorrect. The dimensions mentioned here are not accurate for a cross section taken perpendicular to the base through the midpoints of the 8-inch sides.

Thus, the correct options are 1, 3, and 4.

For more details regarding cross section, visit:

https://brainly.com/question/13029309

#SPJ1

The expression – 0. 75p can be simplified to -0.75p.

This means Harriet can find the new price of an item by finding 25% of the original price.What is the meaning of the terms mentioned in the question?Clearance rack has items for 75% off

This implies that if an item is marked for $1, it can be bought for $0.25.

Thus, the amount reduced is $0.75.

So, Harriet uses the expression -0.75 to find the new price of an item that originally costs dollars.-0.75p means that the amount is reduced by 75% of the original price p.

When we subtract 75% from 100%, we get 25%.

Hence, Harriet can find the new price of an item by finding 25% of the original price which is 0.25p or 25% of p. Answer: The expression – 0. 75p can be simplified to -0.75p. This means Harriet can find the new price of an item by finding 25% of the original price.

To know more about simplified, visit:

https://brainly.com/question/17579585

#SPJ11

The equation for the curve in terms of sin() and cos() is: r = ± √(64 / (1 - 2sin²(θ)))

Starting with the given equation:

r² cos(2θ) = 64

We can use the identity cos(2θ) = cos²(θ) - sin²(θ) to get:

r² (cos²(θ) - sin²(θ)) = 64

Next, we can use the identity cos²(θ) + sin²(θ) = 1 to substitute for cos²(θ) in the above equation:

r² (1 - sin²(θ) - sin²(θ)) = 64

Simplifying this gives:

r² (1 - 2sin²(θ)) = 64

Dividing both sides by (1 - 2sin²(θ)) gives:

r² = 64 / (1 - 2sin²(θ))

Taking the square root of both sides gives:

r = ± √(64 / (1 - 2sin²(θ)))

Thus, the equation for the curve in terms of sin() and cos() is:

r = ± √(64 / (1 - 2sin²(θ)))

(Note that the ± sign indicates that the curve has two branches, one for positive r values and one for negative r values.)

​

To know more about  square root refer to

https://brainly.com/question/29286039

#SPJ11

The payment necessary to amortize the loan is d. $363.67.

The payment necessary to amortize the loan can be found using the formula for the monthly payment of an amortized loan:
P = (Pr(1+r)^n)/((1+r)^n - 1)

Where P stands for the monthly payment, r for the monthly interest rate (calculated by dividing the annual interest rate by 12), and n for the total number of payments.

In this instance, the loan's principal is $13,800, the yearly interest rate is 12%, compounded monthly, and it will take 48 installments to pay it off.

First, we need to calculate the monthly interest rate:
r = 0.12/12 = 0.01

Next, we need to calculate the total number of payments:
n = 48

Now we can plug these values into the formula and solve for P:
P = (13800*0.01*(1+0.01)^48)/((1+0.01)^48 - 1) = $363.67 (rounded to the nearest cent)

Therefore, the answer is d. $363.67.

Know more about loans here:

https://brainly.com/question/26011426

#SPJ11

The  statement that can be considered true ,Data set represents the number of hours spent studying per week, it means that 25% of the individuals surveyed studied for 2.5 hours or less per week. Option C) is the correct answer.

The first quartile of a data set is 2.5, the statement that can be considered true about the data values is that 25% of the values in the data set are less than or equal to 2.5.

The first quartile, denoted as Q1, is a measure of central tendency that divides a data set into four equal parts. It represents the value below which the first 25% of the data lies. In this case, since the first quartile is 2.5, it implies that 25% of the data values in the set are less than or equal to 2.5.

This information provides insights into the distribution and spread of the data set. For example, if the data set represents the number of hours spent studying per week, it means that 25% of the individuals surveyed studied for 2.5 hours or less per week.

It's important to note that without further information about the data set, we cannot make any specific conclusions about the maximum or minimum values, the distribution shape, or the values within the other quartiles. Additional statistical measures and analysis would be needed to determine those aspects.

To know more about Data .

https://brainly.com/question/29642782

#SPJ11

The full question will be :

What statistical measure represents the value below which the first 25% of the data lies in a data set?

Options:

a) Median

b) Mean

c) First quartile (Q1)

d) Third quartile (Q3)

Here's an example of how you can implement the is Connected method in a Friend class representing a social network:

python

Copy code

class Friend:

   def __init__(self, name):

       self.name = name

       self.connections = set()

   def addConnection(self, friend):

       self.connections.add(friend)

       friend.connections.add(self)

   def removeConnection(self, friend):

       self.connections.remove(friend)

       friend.connections.remove(self)

   def isConnected(self, friend):

       visited = set()

       queue = [self]

       while queue:

           curr_friend = queue.pop(0)

           visited.add(curr_friend)

           if curr_friend == friend:

               return True

           for connection in curr_friend.connections:

               if connection not in visited:

                   queue.append(connection)

       return False

In this implementation, the Friend class has a connections set attribute that stores the references to other friends in the social network. The add Connection and remove Connection methods are used to establish or remove connections between friends.

The is Connected method takes another friend as a parameter and performs a breadth-first search (BFS) to determine if there is a path between the current friend and the given friend. It uses a visited set to keep track of visited friends and a queue to process friends in a breadth-first manner. If the given friend is found during the BFS, the method returns True, indicating that they are connected. If the BFS completes without finding the given friend, it returns False, indicating that they are not connected.

Note that this is a basic implementation, and you can modify or extend it based on your specific requirements or additional functionalities you want to include in your social network.

Learn more about functionalities here: brainly.com/question/32386149

#SPJ11

If you conclude that a soda filling machine is not filling bottles completely based on the results of a sample, it means that the sample of bottles you tested showed evidence of incomplete filling.

However, it is important to note that this conclusion is based on a sample and may not represent the behavior of the entire population of filled bottles.

To make a more reliable conclusion about the filling machine's performance, you would need to conduct a statistical analysis to determine the significance of the observed incomplete filling. This analysis could involve hypothesis testing or confidence interval estimation.

Hypothesis testing allows you to assess whether the observed incomplete filling is statistically significant or could have occurred by chance. You would formulate a null hypothesis, such as "the filling machine fills bottles completely," and an alternative hypothesis, such as "the filling machine does not fill bottles completely." By comparing the sample data to the expected behavior under the null hypothesis, you can determine if there is sufficient evidence to reject the null hypothesis in favor of the alternative hypothesis.

The statistical analysis would involve calculating a test statistic, such as a t-test or a z-test, and determining the associated p-value. The p-value represents the probability of observing the sample data or more extreme data if the null hypothesis is true. If the p-value is below a predetermined significance level (e.g., 0.05), you would reject the null hypothesis and conclude that the filling machine is not filling bottles completely.

Additionally, you could also estimate a confidence interval for the proportion of bottles that are filled completely. This would provide a range of values within which the true proportion of completely filled bottles is likely to fall. If the lower limit of the confidence interval is below a desired threshold (e.g., 100%), it would provide further evidence that the filling machine is not consistently filling bottles completely.

It is crucial to note that drawing conclusions based on a sample has inherent limitations. The sample may not accurately represent the entire population of filled bottles, and there is always a margin of error associated with any statistical analysis. Therefore, it is recommended to conduct a larger-scale study or perform ongoing monitoring to obtain more reliable and comprehensive evidence about the filling machine's performance.

In summary, if you conclude that a soda filling machine is not filling bottles completely based on the results of a sample, it is an indication of potential issues with the machine. However, to make a more robust conclusion, you would need to conduct a statistical analysis, such as hypothesis testing or confidence interval estimation, to determine the significance of the observed incomplete filling. This analysis helps account for sampling variability and provides a more reliable assessment of the machine's performance.

To  learn more about probability click here:

brainly.com/question/30362035

#SPJ11

To express the radius of a circle as a function of its circumference, we can use the formula for the circumference of a circle:

C = 2πr

where C is the circumference and r is the radius.

Solving for r, we get:

r = C/(2π)

Thus, we can define the function r(c) as:

r(c) = c/(2π)

where c is the circumference of the circle.

If you need to learn more about radius of a circle, click here

https://brainly.in/question/23537462?referrer=searchResults

#SPJ11

When x = 0 and y = 6, the partial derivatives ∂P/∂x and ∂P/∂y are ∂P/∂x = 12 and ∂P/∂y = 0, respectively.

To find the partial derivatives ∂P/∂x and ∂P/∂y using the Chain Rule, we start by computing the partial derivatives of P with respect to each variable u, v, and w, and then differentiate u, v, and w with respect to x and y.

Given expressions are:

[tex]P = u^2 + v^2 + w^2[/tex]

[tex]u = xe^y\\ v = ye^x\\ w = e^{xy}\\[/tex]

x = 0

y = 6

Let's begin with ∂P/∂x:

Using the Chain Rule, we have:

∂P/∂x = ∂P/∂u × ∂u/∂x + ∂P/∂v × ∂v/∂x + ∂P/∂w × ∂w/∂x

Differentiating each component:

∂P/∂u = 2u

∂u/∂x = [tex]e^y[/tex]

∂P/∂v = 2v

∂v/∂x = [tex]ye^x[/tex]

∂P/∂w = 2w

∂w/∂x = [tex]e^{xy}[/tex]

Substituting the given values:

x = 0

y = 6

∂P/∂x = 2(0 × e^6) × e^0 + 2(6 × e^0) × 0 + 2(e^0 × 6) = 12

Next, let's find ∂P/∂y:

Using the Chain Rule, we have:

∂P/∂y = ∂P/∂u × ∂u/∂y + ∂P/∂v × ∂v/∂y + ∂P/∂w × ∂w/∂y

Differentiating each component:

∂u/∂y = x × [tex]e^y[/tex]

∂v/∂y = x × [tex]e^y[/tex]

∂w/∂y = [tex]e^x[/tex] × y

Substituting the given values:

x = 0

y = 6

∂P/∂y = 2u × (0 × e^6) + 2v × (0 × e^6) + 2w × (e^0 × 6) = 0

Therefore, when x = 0 and y = 6, the partial derivatives are ∂P/∂x = 12 and ∂P/∂y = 0.

Learn more about Chain Rule here:

https://brainly.com/question/30764359

#SPJ11

Answer:

Step-by-step explanation:

u(x, t) is the temperature at position x and time t.

Assuming u(x,t) represents the temperature distribution in a one-dimensional rod, the modified boundary conditions of ux(0,t) = ux(1,t) = 0 imply that the ends of the rod are perfectly insulated, so there is no heat flux across the boundaries. This can be written mathematically as:

u(0, t) = u(1, t) = 0

where u(x, t) is the temperature at position x and time t. This modified boundary condition represents a Dirichlet boundary condition, which specifies the value of u at the boundary.

Learn more about dimensional

brainly.com/question/27271392

#SPJ11

The four points form the vertices of a quadrilateral is w° (1, 0), w (1, √3), w² (-2, √3), w' (1, -√3)

Let's analyze the complex number w and plot its powers and conjugate on an Argand diagram.

Given w = 2(cos(π/3) + i sin(π/3)), we can find w°, w², and w'.

1. w° is the 0th power of w, which is always 1 (1 + 0i) for any non-zero complex number.

2. w² can be found using De Moivre's theorem:
w² = 2²(cos(2π/3) + i sin(2π/3)) = 4(-1/2 + i√3/2).

3. w' is the complex conjugate of w:
w' = 2(cos(π/3) - i sin(π/3)) = 2(1/2 - i√3/2).

Now, let's plot these points on the Argand diagram:
- w° (1, 0)
- w (1, √3)
- w² (-2, √3)
- w' (1, -√3)

These four points form the vertices of a quadrilateral.

To know more about quadrilateral  click on below link :

https://brainly.com/question/22763917#

#SPJ11

A ramp with a mechanical advantage of 8 lifts objects to a height of 1. 5 meters.The length of the ramp is about 12 meters.

The mechanical advantage of a ramp is defined as the ratio of the output force (the force required to lift an object) to the input force (the force applied to the ramp). In this case, the mechanical advantage is given as 8.

The formula for mechanical advantage is:

Mechanical Advantage = Output Force / Input Force

Since the mechanical advantage is 8, it means that the ramp can multiply the input force by a factor of 8 to lift an object. In other words, the output force is 8 times the input force.

In this problem, the height to which the objects are lifted is given as 1.5 meters. This height corresponds to the output distance.

To find the length of the ramp, we can use the formula:

Length of Ramp = Output Distance / Mechanical Advantage

Substituting the given values, we have:

Length of Ramp = 1.5 meters / 8 = 0.1875 meters

Therefore, the length of the ramp is 12 meters.

Learn more about height here:

https://brainly.com/question/16946858

#SPJ11

The probability of outcome e4 is 0.1.

in science, the probability of an event is a number that indicates how likely the event is to occur. It is expressed as a number in the range from 0 and 1, or, using percentage notation, in the range from 0% to 100%

To determine the probability of outcome e4, we need to consider that the sum of probabilities of all outcomes in an experiment must be equal to 1.

Given that p(e1) = 0.2, p(e2) = 0.3, and p(e3) = 0.4, we can calculate the probability of e4 as follows:

p(e4) = 1 - p(e1) - p(e2) - p(e3)

= 1 - 0.2 - 0.3 - 0.4

= 1 - 0.9

= 0.1

Know more about probability here;

https://brainly.com/question/30034780

#SPJ11

[tex]\large \maltese \: \: { \underline{ \underline{ \pmb{ \sf{SolutioN }}}}} : - [/tex]

Answer:

Step-by-step explanation:

[tex] \large \sf \leadsto \: \: 3(5 + x) = 60[/tex]

Now,

[tex]\large \sf \leadsto \: 15 + 3x = 60[/tex]

[tex]\large \sf \leadsto \: 3x = 60 - 15[/tex]

[tex]\large \sf \leadsto3x = 45[/tex]

[tex]\large \sf \leadsto x= \frac{45}{3} [/tex]

[tex]\large \bf \leadsto \: x \: = 15[/tex]

[tex] \underline { \rule{190pt}{5pt}}[/tex]

We have proven that if P(n) is true for infinitely many positive integers, and the implication P(n+1) implies P(n) is true for all n ≥ 1, then P(n) is true for all positive integers n.

We will prove this statement using proof by contradiction.

Assume that there exists a positive integer k such that P(k) is false. Let S be the set of positive integers for which P(n) is false. Since P(k) is false, k must be an element of S. Therefore, S is non-empty.

Since P(n) is true for infinitely many positive integers, there exists a positive integer m such that m > k and P(m) is true.

Now, since P(m) is true and P(n+1) implies P(n) for all n ≥ 1, we can conclude that P(m-1), P(m-2), ..., P(k+1) are all true.

But this contradicts the assumption that k is the smallest positive integer for which P(k) is false, since we just showed that all positive integers between k+1 and m-1 (inclusive) have the property that P(n) is true. Therefore, our assumption that P(k) is false must be false, and so P(k) is true for all positive integers k.

Hence, we have proven that if P(n) is true for infinitely many positive integers, and the implication P(n+1) implies P(n) is true for all n ≥ 1, then P(n) is true for all positive integers n.

Learn more about positive integers here:

https://brainly.com/question/26051073

#SPJ11

The line in the table is y = 2x - 6, the correct option is the third one.

The general linear equation can be written as:

y = ax + b

Where a is the slope and b is the y-intercept.

If a line passes through two points (x₁, y₁) and (x₂, y₂), then the slope is:

a = (y₂ - y₁)/(x₂ - x₁)

Here we can use the last two points (4, 2) and (9, 12), then the slope is:

a = (12 - 2)/(9 - 4) = 2

Then the line is:

y = 2x + b

To find the value of b, we can replace the point (4, 2), then we will get:

2 = 2*4 + b

2 = 8 + b

2 - 8 = b

-6 = b

The line is y = 2x - 6

Learn more about linear equations at:

https://brainly.com/question/1884491

#SPJ9

The Mean Value Theorem applies over the interval (-4, 4) because this is the interval where the function y = sqrt(x^2 - 16) is continuous and differentiable. Beyond this interval, the function is either not continuous or not differentiable. Therefore, the answer in interval notation is (-4, 4).
To determine the interval(s) over which the Mean Value Theorem applies to the function y = sqrt(x^2 - 16), we need to consider the following steps:

1. Find the domain of the function.
2. Check if the function is continuous and differentiable on the domain.

Step 1: Find the domain
The function y = sqrt(x^2 - 16) is defined only when the expression inside the square root is non-negative. Therefore, we have x^2 - 16 ≥ 0. Solving for x, we get two intervals, x ≤ -4 or x ≥ 4.

Step 2: Check continuity and differentiability
The function is continuous on its domain because the square root function is continuous wherever it is defined. Next, we need to find the derivative of the function to check differentiability.

The derivative is: dy/dx = d(sqrt(x^2 - 16))/dx = (1/2)(x^2 - 16)^(-1/2) * 2x = x/(sqrt(x^2 - 16))

Now, the derivative is defined and finite for all x in the domain of the function, which means the function is differentiable on its domain.

Therefore, the Mean Value Theorem applies to the function y = sqrt(x^2 - 16) on the interval(s) (-∞, -4] U [4, ∞).

To know more about mean value visit:

https://brainly.com/question/1136789

#SPJ11

the simplified expression, with x = 9, is approximately 7.56 x 10^110.

To simplify the expression you provided, let's break it down step by step:

1. Start with the expression: x^2 * x^1x^2 * x^1x.

2. Combine the exponents of x: x^(2+1x^2+1x).

3. Simplify the exponents: x^(2+x^2+x).

4. Substitute x = 9: 9^(2+9^2+9).

5. Calculate the exponents: 9^(2+81+9).

6. Add the exponents: 9^(92).

7. Calculate the final result: approximately 7.56 x 10^110.

To know more about expression visit:

brainly.com/question/28170201

#SPJ11

1 sequence of outcomes that contains all doubles when two identical dice are rolled n successive times.

There are 6 possible doubles that can be rolled on a pair of dice (1-1, 2-2, 3-3, 4-4, 5-5, 6-6).

Let's consider the probability of rolling a double on a single roll:

The probability of rolling any specific double (such as 2-2) on a single roll is 1/6 × 1/6 = 1/36 since each die has a 1/6 chance of rolling the specific number needed for the double.

The probability of rolling any double on a single roll is the sum of the probabilities of rolling each specific double is 1/36 + 1/36 + 1/36 + 1/36 + 1/36 + 1/36 = 1/6.

Let's consider the probability of rolling all doubles on n successive rolls. Since each roll is independent the probability of rolling all doubles on a single roll is (1/6)² = 1/36.

The probability of rolling all doubles on n successive rolls is (1/36)ⁿ.

The number of sequences of outcomes that contain all doubles need to count the number of ways to arrange the doubles in the sequence.

There are n positions in the sequence, and we need to choose which positions will have doubles.

There are 6 ways to choose the position of the first double 5 ways to choose the position of the second double (since it can't be in the same position as the first) and so on.

The total number of sequences of outcomes that contain all doubles is:

6 × 5 × 4 × 3 × 2 × 1 = 6!

This assumes that each double is different.

Since the dice are identical need to divide by the number of ways to arrange the doubles is also 6!.

The final answer is:

6!/6! = 1

For similar questions on sequence

https://brainly.com/question/7882626

#SPJ11

To find the value of z, we can use a standard normal table or a calculator with a standard normal distribution function.  Therefore, The value of z that satisfies P(Z < z) = 0.1075 is -1.24 (option e).

To find the value of z, we can use a standard normal table or a calculator with a standard normal distribution function. From the table, we can look for the probability closest to 0.1075, which is 0.1073. The corresponding z-value is -1.24. Alternatively, using a calculator, we can use the inverse standard normal distribution function to find the z-value that corresponds to the probability of 0.1075, which also gives us -1.24.

The standard normal distribution is a probability distribution with mean 0 and standard deviation 1. It is often used to transform normal distributions into standard normal distributions, allowing for easier calculations and comparisons. The probability that a standard normal variable Z is less than a certain value z can be found using a standard normal table or calculator. In this case, the table or calculator shows that the value of z that corresponds to a probability of 0.1075 is -1.24. Therefore, P(Z < -1.24) = 0.1075.

Learn more about standard normal table here:

https://brainly.com/question/30401972

#SPJ11

there are 72 different sandwiches that can be made using one type of meat, one cheese, and one bread.

To count the number of different sandwiches, we need to multiply the number of choices for each component. We have 6 choices for the meat, 4 choices for the cheese, and 3 choices for the bread. Therefore, the total number of different sandwiches we can make is:

6 x 4 x 3 = 72

what is numbers?

In mathematics, numbers are used to represent quantities or values. They are an essential part of arithmetic, algebra, calculus, and other branches of mathematics.

To learn more about number visit:

brainly.com/question/17429689

#SPJ11

The statement A=(s1 + s2 + .... + sn)/ nis the average of the real numbers s1 + s2 + : : : + sn  is true. We can prove it by using technique proof by contradiction.

We can prove the statement using proof by contradiction.

Assume that for all i, si ≤ A. Then, we have:

s1 + s2 + ... + sn ≤ nA

Dividing both sides by n, we get:

A = (s1 + s2 + ... + sn)/n ≤ A

This implies that A ≤ A, which is a contradiction.

Therefore, our assumption that for all i, si ≤ A is false. This means that there exists at least one i such that si > A.

Hence, the statement is true and we have proven it using proof by contradiction.

Learn more about proof by contradiction at  https://brainly.com/question/8062770

#SPJ11

The surface area of the cone is approximately 75.40 square cm.

Using the Pythagorean theorem, we can find the radius of the base of the cone:

r² + h² = s²

where h is the height of the cone and s is the slant height.

Substituting the given values:

r² + 4² = 5²

r² + 16 = 25

r² = 9

r = 3

So, the radius of the base of the cone is 3 cm.

The lateral surface area of the cone can be found using the formula:

L = πrs

where r is the radius of the base and s is the slant height.

Substituting the given values:

L = π(3)(5)

L = 15π

The area of the base of the cone can be found using the formula:

B = πr²

Substituting the value of r:

B = π(3²)

B = 9π

Therefore, the total surface area of the cone is:

A = L + B

A = 15π + 9π

A = 24π

A = 24 × 3.14

A = 75.40

Therefore, the surface area of the cone is approximately 75.40 square cm.

Learn more about the surface area of the cone here:

https://brainly.com/question/16394302

#SPJ1

Answer:

2 equals  to the power of 5

Step-by-step explanation:

The probability of selecting two women and one man in that order is 0.036 (rounded to three decimal places).

To find the probability of selecting two people at random from a group of thirteen women and fifteen men, we first need to determine the total number of people in the group.

Total number of people = 13 women + 15 men = 28 people

(a) To find the probability that all three selected people are men, we need to determine the number of ways we can select two men out of the 15 men in the group:

Number of ways to select two men = 15C2 = (15*14)/(2*1) = 105

Since we need all three selected people to be men, we can only select one more person from the remaining 13 women:

Number of ways to select one woman = 13C1 = 13

Therefore, total number of ways to select three people where all three are men = 105 * 13 = 1365

The probability of selecting all three men = (number of ways to select three men) / (total number of ways to select three people) = 1365 / 32760 = 0.042

So the probability of selecting all three men is 0.042 (rounded to three decimal places).

(b) To find the probability that the first two selected people are women and the third is a man, we need to determine the number of ways we can select two women out of the 13 women in the group:

Number of ways to select two women = 13C2 = (13*12)/(2*1) = 78

Since we need the third selected person to be a man, we can only select one more person from the 15 men in the group:

Number of ways to select one man = 15C1 = 15

Therefore, the total number of ways to select three people where the first two are women and the third is a man = 78 * 15 = 1170

The probability of selecting two women and one man in that order = (number of ways to select two women and one man in that order) / (total number of ways to select three people) = 1170 / 32760 = 0.036

So the probability of selecting two women and one man in that order is 0.036 (rounded to three decimal places).  

To know more about probability refer here

https://brainly.com/question/11234923#

#SPJ11