To create a symbolic link file named "imitator_link" in the "/home/mbrown" directory that points to the "/root/imitator" program, you can use the following command:
ln -s /root/imitator /home/mbrown/imitator_link
This command creates a symbolic link using the ln command with the -s option, which specifies that it should create a symbolic link. The first argument /root/imitator is the source file or directory, and the second argument /home/mbrown/imitator_link is the target path and name of the symbolic link file.
After executing this command, a symbolic link file named "imitator_link" will be created in the "/home/mbrown" directory, and it will point to the "/root/imitator" program. Maggie Brown (mbrown) can then use this symbolic link to access and work with the imitator program.
Know more about symbolic link file here:
https://brainly.com/question/31667846
#SPJ11
What is the basic law concerning transformers?
The basic law concerning transformers is the law of conservation of energy, which states that energy can neither be created nor destroyed, only transformed from one form to another.
What is transformers?
Transformers are electronic devices that are used to change the voltage, current, or frequency of alternating current (AC) electricity. They are important components in electrical power systems, allowing power to be transmitted over long distances and between different voltage levels. Transformers consist of two coils of wire, known as the primary and secondary windings, with an iron core in the middle that serves to link the two coils together. When an alternating current is applied to the primary winding, it creates an alternating magnetic field, which in turn induces a voltage in the secondary winding.
To learn more about transformers
https://brainly.com/question/29665451
#SPJ4
PROBLEM 6.32 For The Given Loading, Determine The Zero - Force Members In Each Of The Two Trusses Shown.
For The Given Loading, Truss A: AB, CD, EF ,Truss B: AB, CD, EF, GH .
What is force ?A push is an effect that can alter an object's motion according to physics. A force may cause an object with mass to accelerate when it changes its velocity, for as when it drifts away from rest. A known way to describe force is as a push or a pull. A vector quantity, it has both direction and magnitude. It is computed using the newton SI unit (N). Force is represented by the letter F. (formerly P).
What force is the strongest?The four forces are the electromagnetic force, gravity, the weak nuclear force, and the strong nuclear force, in that order.
To know more about force visit :
brainly.com/question/13191643
#SPJ4
The attributes of Accounts relation are:
• acctNo
• type
• balance
The attributes of Customers relation are:
• firstName
• lastName
• idNo
• account
The criteria are enumerated, but the most crucial ones are consistency, comparability, reliability, and relevance. Additionally, each of them has a purpose that will have an impact on the accounting data.
Account Attributes are detailed information linked to a record. Each attribute screen offers basic descriptive information about an account, such as the account title, the name of the person who is in charge of it, its function, and the division of the company that uses it. Accounting comprises summarizing, interpreting, and conveying the financial data to the consumers of financial statements in addition to bookkeeping. The primary goal is to keep meticulous records of financial activities. The primary goal is to evaluate the company's financial health and profitability.
Learn more about function here-
https://brainly.com/question/17216645
#SPJ4
No underwater luminaires shall be installed in a permanently-installed swimming pool that operates on supply circuits over ____________ between conductors.
No underwater luminaires shall be installed in a permanently-installed swimming pool that operates on supply circuits over 50 volts between conductors.
What is underwater luminaires?
Underwater luminaires are lights that are designed to be used underwater, typically in swimming pools or other bodies of water.
They are used to provide illumination in and around the water, and can be used for a variety of purposes such as safety, aesthetics, or recreation. They are typically waterproof and sealed to prevent water from entering and damaging the electrical components.
What is conductor?
A conductor is the material which allows electricity to continuosly flow through it easily. In the context of an electrical circuit, a conductor is a material, typically a metal such as copper or aluminum, that allows an electric current to flow through it, thus connecting different parts of an electrical circuit.
Conductors are used to make wires and other components that are used to transmit electricity in a variety of devices and systems, including power grids, electronic devices, and lighting systems.
To learn more about Conductor, visit: https://brainly.com/question/29304605
#SPJ4
Which factor that affects income is out of a worker's personal control? a. educationb. location c. productivity d. politics
Economic downturn, politics and technology change are factors that affect income that is not within a workers control.
What are the economic factors affecting employment?A decline in the economy high level of productivity Cost of insurance rising Low demand for the products of the company. Productivity is the primary factor that influences how employees affect a firm. It goes without saying that motivated, enthusiastic, and engaged individuals produce more at work. In business, productive employees are priceless because they increase the company's revenue significantly. The job market is impacted by a number of things. These include the frequency of job changes, rates of unemployment and employment, immigration, income inequality, discrimination, seasonality, and the state of the economy as a whole. In business, productive employees are priceless because they increase the company's revenue significantly.To learn more about economic factors refer to:
https://brainly.com/question/17323056
#SPJ4
Assume the temperature of the exhaust in an exhaust pipe can be approximated by T = T0(1 + ae-bx)[1 + c cos(omega t)], where T0 = 100 degree C, a = 3, b = 0.03 m-1, c = 0.05, and omega = 100 rad/s. If the exhaust speed is a constant 2 m/s, determine the time rate of change of temperature of the fluid particles at x = 0 and x = 4 m when t = 0. Is the flow steady or unsteady? If unsteady what causes it?
according to the given statement, The flow is unsteady, caused by the periodic term c*cos(omega*t).
What is flow?Flow is a psychological concept that describes an optimal state of consciousness in which a person becomes fully immersed in an activity. It is characterized by a sense of heightened focus, complete absorption, and an energized feeling of being in control. Flow is often associated with activities such as playing an instrument, writing, painting, or any other creative endeavor. It is also associated with sports and exercise, and may be experienced during meditation. Achieving flow is thought to bring about benefits such as increased motivation, creativity, and productivity, as well as improved mental and physical wellbeing.
At x=0:
dT/dt = -300 c sin(100t)
At x=4:
dT/dt = -120 c sin(100t)
To learn more about flow visit :
brainly.com/question/23946677
#SPJ4
An arbitrary temperature scale
Boiling water temperature __
Room temperature __
Ice water temperature__
Boiling nitrogen temperature __
Absolute zero__
Answer:
he j get too much to do and l don't know to check to yiYour organization is in the process of microfilming all the old records in storage. The budget for this process is $500,000 over three years. You have contracted with a company to perform the microfilm services at $0.09 per page and have estimated that there are about 5.5 million pages to be converted. At the end of the first year, you review the invoice and see that you have been billed for converting 2,083,333 pages. 1. Determine your budget variance and what type it is. 2. Provide a short explanation that can be given to administration regarding the variance.
hah duty to it it hey he h very j is to
True/False Indicate whether the statement is true or false. 11. Electronic leak detectors can only be used to detect CFCs. 12. Disposable cylinders are designed to be used for refrigerant recovery. 13. Refrigerant must be recovered from a leaking system before repairs can be performed. 14. A gauge that reads absolute pressure should be adjusted depending on the elevation. 15. The pressure of a perfect vacuum is 29.92 in. Hg. 16. Both valves need to be closed on a gauge manifold in order to evacuate a system. 17. A decrease in temperature can cause the pressure in a cylinder to increase. 18. Service valves are front seated for normal system operation. 19. The compound gauge measures pressure both above and below atmospheric pressure. 20. Fluorescent leak detectors require the use of a halogen light.
Answer:11. False 12. True 13. True 14. True 15. True 16. True 17. False 18. False 19. True 20. False
Explanation:
True/False Indicate whether the statement is true or false. 11. Electronic leak detectors can only be used to detect CFCs. 12. Disposable cylinders are designed to be used for refrigerant recovery. 13. Refrigerant must be recovered from a leaking system before repairs can be performed. 14. A gauge that reads absolute pressure should be adjusted depending on the elevation. 15. The pressure of a perfect vacuum is 29.92 in. Hg. 16. Both valves need to be closed on a gauge manifold in order to evacuate a system. 17. A decrease in temperature can cause the pressure in a cylinder to increase. 18. Service valves are front seated for normal system operation. 19. The compound gauge measures pressure both above and below atmospheric pressure. 20. Fluorescent leak detectors require the use of a halogen light.
The statements are determined whether true or false for the refrigerants and Disposable cylinders.
Given data:
False. Electronic leak detectors are capable of detecting a wide range of refrigerants, not just CFCs. They can detect various types of refrigerants such as HFCs, HCFCs, and others.
True. Disposable cylinders are designed to be used once for specific purposes, such as refrigerant recovery. They are typically not refillable and are intended to be discarded after use.
True. It is necessary to recover refrigerant from a leaking system before performing repairs. This ensures that the refrigerant is not released into the atmosphere, which is environmentally harmful. Proper recovery helps to comply with regulations and minimize refrigerant loss.
False. A gauge that reads absolute pressure does not require adjustment based on elevation. Absolute pressure readings are already referenced to a complete vacuum and are not affected by atmospheric pressure changes at different elevations.
False. The pressure of a perfect vacuum is 0 in. Hg. A perfect vacuum implies the absence of any gas or pressure.
True. When evacuating a system using a gauge manifold, it is essential to close both valves to isolate the system and create a proper vacuum.
False. According to the ideal gas law, a decrease in temperature typically results in a decrease in pressure, assuming the volume and the amount of gas remain constant.
False. Service valves, also known as shutoff valves or isolation valves, are typically back seated (closed) for normal system operation to prevent refrigerant flow. Front seating refers to opening the valve fully.
True. A compound gauge is designed to measure pressure both above and below atmospheric pressure. It usually has two scales or sections, one for positive pressure (above atmospheric) and one for negative pressure (below atmospheric).
False. Fluorescent leak detectors do not require the use of a halogen light. They utilize fluorescent dyes or additives that react with refrigerants to emit a fluorescent glow when illuminated with UV (ultraviolet) light. The UV light source can be separate from the detector itself.
To learn more about refrigerants, refer:
https://brainly.com/question/28265596
#SPJ6
The cantilevered rectangular bar is subjected to the force of 5 kip. Determine the principal stress at point A and B
To determine the principal stress at point A and B on a cantilevered rectangular bar subjected to a force of 5 kip, a detailed analysis of the structure would need to be performed.
Principal Stress Calculation-Rectangular BarInvolve determining the distribution of stresses throughout the bar due to the applied load, and then determining the maximum and minimum principal stresses at points A and B.
Assuming a rectangular cross section, The principal stresses can be calculated by Mohr's Circle. The equations for principal stresses are:
σ1 = (σx + σy + √((σx - σy)² + 4τxy²))/2
σ2 = (σx + σy -√((σx - σy)² + 4τxy²))/2
Where, σx and σy are the normal stresses, and τxy is the shear stress.
It is important to note that the analysis would also require information about the material properties, cross-sectional dimensions, and boundary conditions of the bar, as well as a detailed understanding of the loading conditions and any other factors that may affect the distribution of stresses in the structure.
Learn more about Principal Stress here:
https://brainly.com/question/21139723
#SPJ4
a limitation of the family systems model is:
answer:
A limitation of the family systems model is: A particular family member's needs may be overshadowed by the needs of the system.
3 1 point Categorize the processes below as redow or acid/base
Categorize the processes of Redox reaction and ACID/BASE ( r x n)
The processes of Redox reaction are
digestion of gold in Aqua Regia
photosynthesis
Disinfection of swimming pools with chlorine
The processes Acid/base reaction are
stomach digestion
buffering of heart
burn with sodium citrate
Preparation of soup
The term "redox reaction" refers to the oxidation-reduction reaction that occurs on the surface of metals. This is the accumulation and transfer of electrons that occurs when two dissimilar atoms interact, most notably in ionic bonding. These two reactions happen at the same time and are known to be inseparable.
Acid–base reaction, a type of chemical process defines the exchange of one or more hydrogen ions, H +, between species that may be neutral (molecules such as water, H 2 O; or electrically charged (ions such as ammonium, NH 4+).
To learn more about redox or acid/base
https://brainly.com/question/15686955
#SPJ4
A bimetal fan/limit switch cycles the blower using
A. time on–time off.
B. time on–temperature off.
C. temperature on–time off.
D. temperature on–temperature off.
D. the temperature being on or off. Near the heat exchanger, the airstream contains a bimetal helix. It is a switch component that senses temperature.
The furnace fan limit switch, to put it simply, is a control that instructs your furnace's fan when to turn on and off. Therefore, it instructs the blower to turn off and stop pumping cold air into your home while the furnace is off, and to turn on and specific doing so when the furnace is on. Most furnace fan limit switches have three typical settings: 200°F to turn off the burner, 130°F to turn off the blower, and 100°F to turn it back on.
Learn more about specific here-
https://brainly.com/question/19819958
#SPJ4
Luna drew a scale drawing of the high school. The parking lot, which is 54 meters wide in real life, is 102 centimeters wide in the drawing. What scale did luna use?.
Luna drew a scale drawing of the high school. The parking lot, which is 54 meters wide in real life, is 102 centimeters wide in the drawing. Scale drawings are used to draw shapes in a different proportional size and the scale used in the drawing is 17 centimeters : 9 meters
How to calculate the drawing's scale
The answer to the question is:
54 meters is the actual length.
Size of the scale is 102 centimeters.
The scale is thus:
Scale length equals real length.
This results
Scale: 54 meters at 102 millimeters.
shrink the scale
Scale: 9 meters = 17 millimeters
Your question is incomplete but most probably your full question was
Luna drew a scale drawing of the high school. The parking lot, which is 54 meters wide in real life, is 102 centimeters wide in the drawing. What scale did Luna use? 17 centimeters:___meters
Read more about scale drawings at:
brainly.com/question/24579126
#SPJ4
Calculate v and ix in the circuit of Fig. 2.79.
The expression for the voltage across the resistor is v=6V and I^ x=-4A
Step by step explanation:
The current in the loops are, I^ 1 in loop 1 and I^2 in loop 2
Apply Kirchhoff's voltage law to loop 1.
10=12i^ 1 +4
10-4=12i^ 1
12i^ 1=6
I^ 1 = 6/12=0.5 A
Write the expression for the voltage across the resistor:
V=12I^ 1
=12(0.5)
v=6V
Apply KVL in loop 2:
3i^ x+16=4
3i^ x=-12
I^ x=-12/3
I^ x=-4A
Kirchhoff's Voltage Law describes the distribution of electrical voltage within an electrical circuit's loop, or closed conducting path. According to Kirchhoff's Voltage Law.
Any loop's algebraic sum of voltage (potential) differences must equal zero.
To learn more about Kirchhoff's Voltage Law:
https://brainly.com/question/29831050
#SPJ4
Technician A says that some people refer to the blower motor fan
as a squirrel fan. Technician B says that changing the blower fan
speed can be done by using a solenoid. Who is correct?
Tech A
Tech B
Both Techs A and B
ONeither Tech A nor B
Since Technician A says that some people refer to the blower motor fan as a squirrel fan. Technician B says that changing the blower fan speed can be done by using a solenoid. The correct option is option C: Both Techs A and B
What is the fan about?Some people refer to the blower motor fan as a "squirrel fan" because the fan blade is shaped like a squirrel cage. Technician A is correct in this statement.
Therefore, Changing the blower fan speed can be done by using a solenoid. This is an electromagnetic device that controls the flow of electrical current to the fan motor, which in turn controls the fan speed. Technician B is correct in this statement.
Learn more about solenoid from
https://brainly.com/question/1873362
#SPJ1
Given: A homogeneous quarter-circle block (with a radius of
R
and a weight of
W
) is supported by a rough, horizontal floor, as shown.. A force
P
is applied to the block at corner
B
. Find: For this problem: a) Determine the
x
-location of the normal force acting on the block by the floor. Express your answer in terms of
R
. b) What is the minimum coefficient of static friction between the block and ground,
μ
s
, that is required to prevent motion of the block? c) Is the block in a state of impending slipping or tipping for the value of
μ
s
found in b) above? Explain. For this problem, use:
P=W
When a circle is divided into four equal parts, each part is called the quarter of a circle.
What is meant by quarter circle?A circle is a geometric shape that represents the path all of those points take while being equally distance from the circle's centre. A circle's quarter represents one-fourth of the entire circle. As a result, the area of a quarter circle represents the fourth of a circle's total area.
The area of the circle, A = r2 if the radius of the circle is r, follows.
The area of a quarter circle is then equal to A times 14 to get r2/4.
Therefore, the coordinates of a quarter ring's centre of mass in the first quadrant are (XCM,YCM)=(2R,2R). Note: Always consider a small mass when determining the centre of mass.
To learn more about quarter of a circle refer to:
https://brainly.com/question/915567
#SPJ1
In Assembly Language Please Write a program called "NumAverage" that inputs numbers (non-zero positive integers) from a user, averages those numbers, and then displays the result.The program should keep asking for new numbers until the user enters "q" (for quit) or any other character. At that time, the program should average all the numbers entered and display the result. You will need a counter to keep track of the how many numbers are entered. Make sure you display adequate instructions on how the program works. Also display an informative output.
Example: Enter a number: 32
Enter a number: 18
Enter a number: 10
Enter a number: q
The average of your numbers is: 20
================================
For ex write in java language
int sum =0 ; int i =0;
while (input != 'q'){
print(" Enter a number :");
input=next.Int();
sum =input + sum;
i++;}
print ("average number" + ( sum /i) );
To write a program called "NumAverage" that inputs numbers (non-zero positive integers) from a user, averages those numbers, and then displays the result, check the code given below.
What is program?A specific type of data made up of characters, numbers, and strings must be processed by programmers in order for the results to be useful, so programming languages are created and designed to assist in this process. The term "programme" refers to a collection of instructions that process data.
.MODEL SMALL
.DATA
VAL1 DB ?
NL1 DB 0AH,0DH,'ENTER HOW MANY NO U WANT:','$'
NL2 DB 0AH,0DH,'ENTER NO:','$'
cmp 0AH,Q
jmp
NL3 DB 0AH,0DH,'AVEARGE:','$'
.CODE
MAIN PROC
MOV AX,(atsymbol)DATA
MOV DS,AX
LEA DX,NL1
MOV AH,09H
INT 21H
MOV AH,01H
INT 21H
SUB AL,30H
MOV CL,AL
MOV BL,AL
MOV AL,00
MOV VAL1,AL
LBL1:
LEA DX,NL2
MOV AH,09H
INT 21H
MOV AH,01H
INT 21H
SUB AL,30H
ADD AL,VAL1
MOV VAL1,AL
LOOP LBL1
LBL2:
LEA DX,NL3
MOV AH,09H
INT 21H
MOV AX,00
MOV AL,VAL1
DIV BL
ADD AX,3030H
MOV DX,AX
MOV AH,02H
INT 21H
MOV AH,4CH
INT 21H
MAIN ENDP
END MAIN
Learn more about program
https://brainly.com/question/11023419
#SPJ4
n K-means clustering, the observations (data items) are evaluated to determine how many clusters exist within the data set.
K-means clustering is a method of clustering observations (data items) into groups (clusters) based on their similarity. The number of clusters is a user-specified parameter, typically denoted by "k".
How K-means clustering method works?The algorithm iteratively assigns each observation to the cluster with the nearest mean (center) until convergence, at which point the final cluster assignments are returned. The goal of K-means is to partition the observations into k clusters in which each observation belongs to the cluster with the nearest mean.
The goal is to minimize the distance between the observations and the cluster mean they are assigned to. The final cluster assignments and cluster means are returned as the output of the algorithm. It is widely used in data mining, machine learning and statistics.
To learn more about K-means clustering visit: https://brainly.com/question/14960630
#SPJ4
These types of contaminants can be result from welding, cleaning or painting:
Welding fumes can cause serious health problems for workers if inhaled, according to OSHA.
Is smoke from welding harmful?Short-term exposure may cause nausea, lightheadedness, or irritation of the eyes, nose, and throat. Long-term inhalation of welding fumes can cause renal and nervous system damage as well as lung, throat, and urinary tract cancer. UV radiation and metal fume exposure are two health risks associated with welding, cutting, and brazing procedures. The risks associated with these procedures include burns, eye injury, electrical shock, wounds, and toe and finger crushing. Additionally, welding emits fumes. When heated metal vapours cool and condense into extremely minute particles, which remain suspended in the vapour or the gas, fumes are produced. The particles, which are frequently smaller than one micrometre (one-fiftieth the width of a human hair), may be made of metal or metal compounds.To learn more about harmful refer to:
https://brainly.com/question/17143947
#SPJ4
Draw the shear and moment diagrams for the beam
Similar to shear diagrams, moment diagrams may be used to determine the position and magnitude of the greatest positive and negative moment, as well as the moment at any given place.
Using the areas of the regions in the shear-diagram allows you to create a moment-diagram quickly and easily. You must first answer the shear diagram and all of the reactions before proceeding.
Here is a member that has been solved to the appropriate state so that the moment diagram may be worked on. The current shear diagram is followed by the beginning of a moment diagram (M) (V).
Shear diagrams and moment diagrams both start and terminate at zero. The integral of each segment in the shear diagram is the moment in that region. Below are labels for the shear diagram's area regions, which will be used as references later.
Learn more about Shear here:
https://brainly.com/question/14418799
#SPJ4
Which is the most common way to install memory in a laptop
Find the cover for the memory module slot. Insert the module by sliding it. The majority of socket alignments are roughly 30 degrees. Change the memory.
What exactly is memory?Memory is the ability to take in information from the surrounding environment, process it, store it, and then recall it at a later time—sometimes years later. A memory storage system or filing cabinet are frequently used as analogies for human memory.
Why is memory so crucial?Memory is a necessary part of every person's life. We are unable to function with in present or consider the future without a remembrance of the past. We wouldn't be able to recall our actions from the previous day, the present, or the future.
To know more about memory visit:
https://brainly.com/question/11103360
#SPJ1
Use the formula method to determine the resultant force that this liquid exerts on plate B.
Use the formula method to determine the location of the resultant force that this liquid exerts on plate B measured from the bottom of the tank.
The force that this liquid ultimately exerts on plate B is therefore: F = 1000 kg/m3 9.8 m/s2 0.5 m2 2 m = 98 N
How does force work?A push is an effect that can alter an object's motion according to physics. A force may cause an object with mass to accelerate when it changes its velocity, for as when it drifts away from rest. A known way to describe force is as a push or a pull. A vector quantity, it has both direction and magnitude. It is computed using the newton SI unit (N). Force is represented by the letter F. (formerly P).
What three qualities do all forces share?Forces are always strong and have a purpose. As seen in the video whenever Zoe softly strikes the golf ball, forces can be mild. Or even a force can indeed be strong, as in the case of Izzy's powerful strike on the ball. Forces have a direction as well.
To know more about force visit :
brainly.com/question/13191643
#SPJ4
in a typical client-server database application, the client is called the ____.
Typically, the client is referred to as the front-end in client-server database applications.
What is a "database"?
An organized group of data that is electronically accessible and stored is referred to as a database in computing. Large databases are housed on computer clusters or cloud storage whereas small databases can be kept on a file system. Database design involves both formal methods and pragmatic factors, such as representing data, effective data representation and storage, query languages, privacy and security of sensitive data, as well as distributed computing problems, such as continuing to support concurrent access and fault tolerance.
To know more about database
https://brainly.com/question/29412324
#SPJ4
12.15 Each of the systems shown is initially at rest. Neglecting axle friction and the masses of the pulleys, determine for each system (a) the acceleration of block A, (b) the velocity of block A after it has moved through 10 ft, (c) the time required for block A to reach a velocity of 20 ft/s.
(a) The acceleration of block A is 10 ft/s^2.
(b) The velocity of block A after it has moved through 10 ft is 20 ft/s.
(c) The time required for block A to reach a velocity of 20 ft/s is 2 seconds.
How does acceleration work?
The rate at which an object's velocity with respect to time changes is referred to as accelerating in mechanics. It is a vector quantity to speed (in that they have magnitude and direction). The direction of the net force applied on an item determines the direction of its acceleration. According to Newton's Second Law, the amount of an organism's acceleration is the cumulative result of two causes:
(1) That item's mass, based on the materials from of which it is formed, — size is inversely related to the object's mass. (2) The net balance of all external forces acting against that object — magnitude is directly related to this net resultant force.
To know more about acceleration
https://brainly.com/question/12550364
#SPJ4
A pipeline, used for the transport of crude oil, is buried in the earth such that its centerline is a distance of 1.5m below the surface. The pipe has an outer diameter of 0.5 m and is insulated with a layer of cellular glass 100 mm thick. What is the heat loss per unit length of pipe when heated oil at 120 C flows through the pipe and the surface of the earth is at a temperature of 0 C?
To get the heat loss of an entire building, you divide the building into areas that have the same U value, and then add them all up to get the total heat loss.
How do you calculate heat loss?Q=U*A*T, or more simply put, the heat loss of an area of size A is determined by the U value of the materials and the temperature difference between inside and outside (i.e., the temperature difference between the two surfaces, not the two air temperatures).
You must divide a building into sections with the same U value in order to calculate the overall heat loss for the entire structure.
Thermal conductivity is the ability of an object to transfer thermal energy into another object when it comes into touch with one that is at a lower temperature. A cylinder's energy transfer rate while its contents are at high temperatures
To learn more about heat loss refer to:
https://brainly.com/question/18329426
#SPJ4
Sharon drives her rocket through a magnetic field, traveling to the right at a speed of 1000 m/s as measured by Bill. As she passes Bill, she shoots a positive charge backward at a speed of 1000 m/s relative to her ? A.) according, to Sharon, what kind of force or forces Act on the charge? In which directions? Draw the forces on the charge. B) according to Bill, what kind of force acts on the charge? In which directions? Draw the forces on the charge. Explain the physics of what causes that force.
The positive charge will experience two forces acting on it: a magnetic force in the opposite direction its motion, & an electric force in same direction as motion.
What is Lorentz force?The Lorentz force is the force that a moving charge experiences in an electromagnetic field. It is the combination of electric and magnetic force, and is the result of the interaction between a moving charged particle and an electromagnetic field. The Lorentz force is given by the equation: F = qE + qv × B, where q is the charge of the particle, E is the electric field, v is the velocity of the particle, and B is the magnetic field.
To know more about Lorentz force visit :
https://brainly.com/question/29944190
#SPJ4
4.
Describe the correct use of any equipment used to protect the health and safety of themselves and
their colleagues
Items like gloves, safety glasses, shoes, earplugs or muffs, hard helmets, respirators, or coveralls, vests, and full body suits are examples of personal protection equipment.
What equipment is are used for safety and protection?Wearing a safety helmet when using a power tool, donning the proper safety gear when dealing with chemicals, and taking all necessary measures when operating machinery are examples of the proper use of any equipment used to safeguard their health and the health of their coworkers.
Gloves, safety goggles, shoes, earplugs, respirators, hard hats, coveralls, vests, and full body suits are examples of personal protection equipment.
Healthcare Facilities Using PPE:
Gloves safeguard the hands; gowns or aprons defend the skin or clothing; masks and respirators screen the mouth and nose; goggles guard the eyes; and face shields cover the complete face.
To learn more about personal protection equipment refer to:
https://brainly.com/question/13720623
#SPJ1
When is Environmental Impact Assessment start?
Explanation:
Since the 1960s, environmental impact assessments have been part of increasing awareness of the environment. In an EIA, the impacts of a proposed construction or development project are assessed. As a result of EIAs, objective decision-making can be achieved through technical evaluations. The National Environmental Policy Act of 1969 gave EIA formal status in the United States. Globally, EIAs are becoming more common. Environmental assessments have vastly outnumbered more rigorous environmental impact statements every year. An environmental assessment is a "mini-Environmental Impact Statement" designed to provide sufficient information to enable an agency to decide whether to prepare a full-blown EIS.
Hope it Helps!
Calculate the backwash velocity necessary to expand a sand filter with an effective size of 0.6 mm and a uniformity coefficient of 1.3. This medium (or any other, for that matter) can be cleaned at a backwash velocity of 0.3 m/min if the fluidization is provided by air scour. Calculate the volume of water saved during a 10 min backwash of a 2 by 4 m filter if air scours is used. If the cost of water production is 25 BDT/m3, how much money would be saved per year by air fluidization if the filter runs on average 2 days in length?
The backwash velocity necessary to expand a sand filter with an effective size of 0.6 mm and a uniformity coefficient of 1.3 is 15.6 mm/min or 0.156 m/min
The volume of water saved during a 10 min backwash of a 2 by 4 m filter if air scours is used is 4560 L
The money that would be saved per year by air fluidization if the filter runs on average 2 days in length is 8.1*10^5 BDT/year.
How can you calculate the backwash velocity, volume of water and money to be saved?To calculate the backwash velocity necessary to expand a sand filter with an effective size of 0.6 mm and a uniformity coefficient of 1.3, the following formula can be used:
Backwash velocity = (effective size * uniformity coefficient) / 3
Plugging in the values, we get:
Backwash velocity = (0.6 mm * 1.3) / 3 = 0.26 mm/s
To convert this to meters per minute, we multiply by 60:
Backwash velocity = 0.26 mm/s * 60 = 15.6 mm/min or 0.156 m/min
The fluidization is provided by air scour, which can clean the medium at a backwash velocity of 0.3 m/min.
To calculate the volume of water saved during a 10 min backwash of a 2 by 4 m filter if air scours is used, we can use the formula:
Volume of water saved = (filter area * backwash time * water flow rate) - (filter area * backwash time * air flow rate)
Plugging in the values, we get:
Volume of water saved = (2 m * 4 m * 600 L/min) - (2 m * 4 m * 0.3 m/min) = 4800 L - 240 L = 4560 L
If the cost of water production is 25 BDT/m3, the money saved per year by air fluidization if the filter runs on average 2 days in length can be calculated as:
Money saved per year = (volume of water saved per backwash * number of backwashes per year) * (cost of water production)
Plugging in the values, we get:
Money saved per year = (4560 L/backwash * 365 / 2 days/year) * 25 BDT/m3 = 8.1*10^5 BDT/year
Therefore, the correct answers are as given above
learn more about velocity: https://brainly.com/question/80295
#SPJ1