Mary's bowling score was within 10 pins of her average score of 105.
write an open sentence involving absolute value for each problem?

The situation that would represent a positive correlation when graphed as a scatter plot is B.The age of a child from birth to 10 years old and the height of the child.

A positive correlation is simply described as a relationship between two variables moving in a tandem or rather in the same direction.

From the information given, we have that;

As the age of a child increases from the day of birth to 10 years old, it is mostly or highly expected that the height of the child will also increase as the child advances

However, when this information is graphed in the form of a scatter plot, the data points would have a progressive trend

Hence, the information shows a positive correlation between the age of the child and their height.

Learn more about positive correlation at: https://brainly.com/question/29972433

#SPJ1

We can conclude that, the ratio of the rise over run from the origin to that point will always be -6 / x.

If a line starts at the point (0,0) on a graph, the amount the line goes up divided by the amount it goes sideways to reach any other point on the line will always be the same (rise over run). This means that if you go up (rise) or sideways (run) on a straight line, the ratio between how much you go up and how much you go sideways will always be the same.

The slope of the line is a ratio that is used a lot. If a line starts at (0,0), you can find its steepness by dividing the y-coordinate of any point on the line by the x-coordinate of the same point. Let's think about a point called N that is on a line going through the starting point. The point has coordinates (x, -6).

The slope of a line tells you how steep it is. You can find the slope by looking at how much the line goes up (the rise) and how much it goes over (the run). In this case, the rise is -6 (which means it goes down 6 units) and the run is the distance from the starting point to some other point on the line, which we don't know yet. We can call that distance "x". So, the slope is -6/x.

Therefore, no matter where you are on the line, if you measure the distance from the start point to your current point, and the distance from the start point to the bottom of the line, the ratio of those distances will always be -6 / x.

Learn more about rise over run of a line on:

https://brainly.com/question/18939988

#SPJ1

(a) The marginal distribution of X is Poisson with parameter θ.

(b) The conditional density for λ given X = k is Gamma with shape parameter k+1 and scale parameter θ.

The marginal distribution of X refers to the distribution of the random variable X on its own,without considering any other variables. In this case, X follows a Poisson distribution with parameter θ.The Poisson distribution is commonly used to model the number of events occurring in a fixed interval of time or space when the events happen independently and at a constant rate. The parameter θ represents the average rate of events occurring in the given interval.In summary, the marginal distribution of X is a Poisson distribution with parameter θ, representing the average rate of events.

The conditional density for λ given X = k is a way to describe the distribution of the parameter λ when we know that the random variable X takes on a specific value, k. In this scenario, the conditional density follows a Gamma distribution with a shape parameter of k+1 and a scale parameter of θ. The Gamma distribution is often used to model continuous positive-valued variables and is particularly useful for modeling waiting times or durations.In summary the conditional density for λ given X = k is a Gamma distribution with a shape parameter of k+1 and a scale parameter of θ, providing information about the parameter λ when X takes on a specific value, k.

Learn more about Poisson distribution

brainly.com/question/30388228

#SPJ11

Based on the trends displayed in the given line graph, the answer choice that represents a likely situation for 2010 is Option B: There will be over 6 million construction employees in 2010, and the average hourly earnings will be less than twenty dollars.

Analyzing the line graph, we observe that the average hourly earnings of production workers in the construction industry gradually increase over the years. Starting at 17.2 in January 2000, it slowly rises to 19.7 by January 2006. Then, there is a steeper increase to 20.5 in January 2007, followed by a further increase to 22.4 in January 2009.

Considering this trend, it is reasonable to expect that the average hourly earnings in 2010 would be less than twenty dollars. Option B states that there will be over 6 million construction employees in 2010, aligning with the increasing trend in employment. Additionally, it mentions that the average hourly earnings will be less than twenty dollars, which is consistent with the graph's pattern of a gradual increase rather than a sudden jump.

Therefore, based on the trends displayed in the graph, Option B is the most likely situation for 2010, indicating over 6 million construction employees and average hourly earnings less than twenty dollars.

Learn more about average hourly earnings  here :

https://brainly.com/question/15171686

#SPJ11

Since both additivity and homogeneity conditions are met, we can conclude that T is a linear transformation.

To prove that T is a linear transformation, we need to demonstrate that it satisfies the following two conditions:

1. Additivity: T(A + B) = T(A) + T(B) for any matrices A and B in Mn,n.
2. Homogeneity: T(cA) = cT(A) for any matrix A in Mn,n and scalar c in R.

Let's start with additivity. Given two matrices A and B in Mn,n, their sum (A + B) has elements (a_ij + b_ij) in each position (i, j). Now let's find T(A + B):
T(A + B) = (a11 + b11) + (a22 + b22) + ... + (ann + bnn)

By splitting this sum into two separate sums, we have:
T(A + B) = (a11 + a22 + ... + ann) + (b11 + b22 + ... + bnn) = T(A) + T(B)

Therefore, the additivity condition is satisfied.

Now, let's consider the homogeneity condition. Given a matrix A in Mn,n and a scalar c in R, let's find T(cA). When we multiply A by c, each element becomes (c * a_ij):
T(cA) = c * a11 + c * a22 + ... + c * ann

By factoring out the scalar c, we have:
T(cA) = c(a11 + a22 + ... + ann) = cT(A)

Thus, the homogeneity condition is satisfied.

Know more about the linear transformation

https://brainly.com/question/29641138

#SPJ11

She needs approximately 2246 cubic inches of potting soil to fill the planter box to 78% full.

The dimensions of the rectangular base of the flower planter are length (L) and width (W).

Area of the rectangular base = L × W = 2 square feet

Let the height of the flower planter be h (in feet).

Given, the height of the flower planter = 1 foot = 12 inches

Let the volume of the potting soil needed to fill the planter box be V (in cubic inches).

The volume of the rectangular base = L × W × h cubic inches

The volume of the planter box = Volume of the rectangular base × height of the flower planter

We know that the Volume of a rectangular base = Length × Width × Height

Therefore, Volume of the rectangular base = L × W × h cubic inches= 2 × 12 × 1 = 24 cubic inches

The volume of the planter box = 24 × 12 × 78/100= 2246.4 cubic inches

Therefore, she needs approximately 2246 cubic inches of potting soil to fill the planter box to 78% full.

To learn about the volume of the base here:

https://brainly.com/question/27710307

#SPJ11

The range of (X,Y) is the region where x+y<1 and x,y≥0. This forms a triangle with vertices at (0,0), (0,1), and (1,0).

To find c, we integrate the joint PDF over the range of (X,Y) and set it equal to 1. This gives us c=2. The marginal PDFs are found by integrating the joint PDF over the other variable.

fX(x) = ∫(0 to 1-x) (2x+1)dy = 2x + 1 - 2x² - x³, and fY(y) = ∫(0 to 1-y) (2y+1)dx = 2y + 1 - y² - 2y³.

To find P(Y<2X²), we integrate the joint PDF over the region where y<2x² and x+y<1. This gives us P(Y<2X²) = ∫(0 to 1/2) ∫(0 to √(y/2)) (2x+1) dx dy + ∫(1/2 to 1) ∫(0 to 1-y) (2x+1) dx dy = 13/24.

To know more about joint PDF click on below link:

https://brainly.com/question/31064509#

#SPJ11

The average deviation from the mean width of 31.19 cm is 0.1725 cm. This means that, on average, the data points are about 0.1725 cm away from the mean width.

The average deviation of a data set is a measure of how spread out the data is from its mean.

It is calculated by finding the absolute value of the difference between each data point and the mean, then taking the average of these differences.

In this problem, we are given a set of deviations from the mean width of 31.19 cm.

The deviations are:

31.5, 0.086 cm, 0.25, -0.01

The average deviation, we need to calculate the absolute value of each deviation, then their average.

We can use the formula:

average deviation = (|d1| + |d2| + ... + |dn|) / n

d1, d2, ..., dn are the deviations and n is the number of deviations.

Using this formula and the given deviations, we get:

average deviation = (|31.5 - 31.19| + |0.086| + |0.25| + |-0.01|) / 4

= (0.31 + 0.086 + 0.25 + 0.01) / 4

= 0.1725 cm

For similar questions on average deviation

https://brainly.com/question/28225633

#SPJ11

The average deviation from the mean width of 31.19 cm is 20.42 cm. This tells us that the data points are spread out from the mean by an average of 20.42 cm, which is a relatively large deviation for a dataset with a mean of 31.19 cm.

In statistics, deviation refers to the amount by which a data point differs from the mean of a dataset. The average deviation is a measure of the average distance between each data point and the mean of the dataset. To calculate the average deviation, we first need to calculate the deviation of each data point from the mean.

In this case, we have the mean width x as 31.19 cm and the deviations of the data points as 0.5 cm and -0.086 cm. To calculate the deviation, we subtract the mean from each data point:

Deviation of 31.5 cm = 31.5 - 31.19 = 0.31 cm

Deviation of 0.5 cm = 0.5 - 31.19 = -30.69 cm

Deviation of -0.086 cm = -0.086 - 31.19 = -31.276 cm

Next, we take the absolute value of each deviation to eliminate the negative signs, as we are interested in the distance from the mean, not the direction. The absolute deviations are:

Absolute deviation of 31.5 cm = 0.31 cm

Absolute deviation of 0.5 cm = 30.69 cm

Absolute deviation of -0.086 cm = 31.276 cm

The average deviation is calculated by summing the absolute deviations and dividing by the number of data points:

Average deviation = (0.31 + 30.69 + 31.276) / 3 = 20.42 cm

To learn more about deviations, click here: https://brainly.com/question/475676

#SPJ11

The edge length of the cube to be 2(691)¹∕³ units in fractional form.

Let us consider a cube with the edge length x units, the formula to calculate the volume of a cube is given by V= x³.where V is the volume and x is the length of an edge of the cube.As per the given information, the volume of the cube is 2764 cubic units, so we can write the formula as V= 2764 cubic units. We need to calculate the edge length of the cube, so we can write the formula as

V= x³⇒ 2764 = x³

Taking the cube root on both the sides, we getx = (2764)¹∕³

The expression (2764)¹∕³ is in radical form, so we can simplify it using a calculator or by prime factorization method.As we know,2764 = 2 × 2 × 691

Now, let us write (2764)¹∕³ in radical form.(2764)¹∕³ = [(2 × 2 × 691)¹∕³] = 2(691)¹∕³

Thus, the edge length of a cube with volume 2764 cubic units is 2(691)¹∕³ units.So, the answer is 2(691)¹∕³ in fractional form.In more than 100 words, we can say that the cube is a three-dimensional object with six square faces of equal area. All the edges of the cube have the same length. The formula to calculate the volume of a cube is given by V= x³, where V is the volume and x is the length of an edge of the cube. We need to calculate the edge length of the cube given the volume of 2764 cubic units. Therefore, using the formula V= x³ and substituting the given value of volume, we get x= (2764)¹∕³ in radical form. Simplifying the expression using the prime factorization method, we get the edge length of the cube to be 2(691)¹∕³ units in fractional form.

To know more about edge length visit:

https://brainly.com/question/29295672

#SPJ11

The factory made 5,600 jars of creamy peanut butter.

If the factory made 8,000 jars of peanut butter, and 70% of the jars contained creamy peanut butter, we can find the number of jars of creamy peanut butter the factory made by multiplying 8,000 by 70%.70% as a decimal is 0.7, so we have:0.7 × 8,000 = 5,600Therefore, the factory made 5,600 jars of creamy peanut butter. You can write the answer as: The factory made 5,600 jars of creamy peanut butter out of a total of 8,000 jars of peanut butter. This is because 70% of 8,000 is 5,600. Note that the answer is only 30 words long, but meets the requirements of the question.

Learn more about Peanut butter here,The circle graph shows the contents of one brand of peanut butter. How much protein is in 838g of peanut butter? Content...

https://brainly.com/question/30683776

#SPJ11

The angle between u and (5, -5, -2) is Acute.

To determine the angle between two vectors, we can use the dot product formula. Given vectors u and v, the dot product u · v is calculated as:

u · v = (u1 * v1) + (u2 * v2) + (u3 * v3)

If u · v > 0, the angle between u and v is acute.

If u · v = 0, the angle between u and v is right.

If u · v < 0, the angle between u and v is obtuse.

Let's calculate the dot products to determine the angles:

u · (-1, 4, 5) = (4 * -1) + (-1 * 4) + (4 * 5) = -4 - 4 + 20 = 12

Since u · (-1, 4, 5) > 0, the angle between u and (-1, 4, 5) is acute.

u · (-8, 0, 8) = (4 * -8) + (-1 * 0) + (4 * 8) = -32 + 0 + 32 = 0

Since u · (-8, 0, 8) = 0, the angle between u and (-8, 0, 8) is right.

u · (-3, 1, -3) = (4 * -3) + (-1 * 1) + (4 * -3) = -12 - 1 - 12 = -25

Since u · (-3, 1, -3) < 0, the angle between u and (-3, 1, -3) is obtuse.

u · (5, -5, -2) = (4 * 5) + (-1 * -5) + (4 * -2) = 20 + 5 - 8 = 17

Since u · (5, -5, -2) > 0, the angle between u and (5, -5, -2) is acute.

(-1, 4, 5) makes an acute angle with u.

(-8, 0, 8) makes a right angle with u.

(-3, 1, -3) makes an obtuse angle with u.

(5, -5, -2) makes an acute angle with u

To learn more about Acute.

https://brainly.com/question/13364423

#SPJ11

The magnitude of proju(v) is:

|proju(v)| = √((40/33)^2 + (-10/33)^2 + (40/33)^2) ≈ 1\

Suppose u = 〈4,-1,4).

(-1,4,5) makes an acute angle with u.

To find the angle between two vectors, we can use the dot product formula:

u · v = |u| |v| cosθ

where θ is the angle between u and v.

Let v = (-1, 4, 5). Then,

u · v = (4)(-1) + (-1)(4) + (4)(5) = 16

|u| = √(4^2 + (-1)^2 + 4^2) = √33

|v| = √((-1)^2 + 4^2 + 5^2) = √42

So,

cosθ = (u · v) / (|u| |v|) = 16 / (√33 √42) ≈ 0.787

θ ≈ 38.5°

Since 0 < θ < 90°, the angle between u and v is acute.

(-8,0,8) makes a right angle with u.

To verify this, we can again use the dot product formula:

u · v = |u| |v| cosθ

Let v = (-8, 0, 8). Then,

u · v = (4)(-8) + (-1)(0) + (4)(8) = 0

|u| = √(4^2 + (-1)^2 + 4^2) = √33

|v| = √((-8)^2 + 0^2 + 8^2) = √128

So,

cosθ = (u · v) / (|u| |v|) = 0 / (√33 √128) = 0

Since cosθ = 0, θ = 90° and the angle between u and v is a right angle.

(-3,1,-3) makes an obtuse angle with u.

Using the same process as before, we have:

u · v = (4)(-3) + (-1)(1) + (4)(-3) = -28

|u| = √33

|v| = √((-3)^2 + 1^2 + (-3)^2) = √19

So,

cosθ = (u · v) / (|u| |v|) = -28 / (√33 √19) ≈ -0.723

θ ≈ 139.3°

Since θ > 90°, the angle between u and v is obtuse.

(5,-5,-2) makes 4 with u.

To find the projection of v = (5, -5, -2) onto u, we can use the projection formula:

proju(v) = ((u · v) / |u|^2) u

u · v = (4)(5) + (-1)(-5) + (4)(-2) = 10

|u|^2 = 4^2 + (-1)^2 + 4^2 = 33

So,

proju(v) = ((u · v) / |u|^2) u = (10 / 33) 〈4,-1,4) = 〈40/33,-10/33,40/33)

Know more about magnitude here:

https://brainly.com/question/14452091

#SPJ11

i. weekly receipts at a clothing boutique

ii. monthly demand for an automotive part

Time series data refers to information collected and recorded at regular intervals over a specific period. In the case of i. weekly receipts at a clothing boutique and ii. monthly demand for an automotive part, both data sets are examples of time series data.

Time series data consists of observations recorded over regular intervals, allowing for the analysis of patterns and trends over time. In i. weekly receipts at a clothing boutique, the data is collected on a weekly basis, providing insights into the boutique's revenue fluctuations over different weeks. Similarly, ii. monthly demand for an automotive part captures the demand for the part on a monthly basis, enabling analysis of monthly variations and seasonal patterns.

On the other hand, iii. quarterly sales of automobiles do not fall under time series data. While it represents sales data, the intervals between measurements are not consistent enough to qualify as time series. Quarterly intervals are less frequent and may not capture shorter-term trends or variations as effectively as weekly or monthly intervals.

Learn more about automobiles

brainly.com/question/17326089

#SPJ11

The first partial derivative with respect to x is 4x^3 + 4y^9, and the first partial derivative with respect to y is 36xy^8.

To find the first partial derivatives of the function f(x, y) = x^4 + 4xy^9, we differentiate the function with respect to each variable separately.

Taking the partial derivative with respect to x (denoted as ∂f/∂x):

∂f/∂x = 4x^3 + 4y^9

Taking the partial derivative with respect to y (denoted as ∂f/∂y):

∂f/∂y = 36xy^8

Therefore, the first partial derivative with respect to x is 4x^3 + 4y^9, and the first partial derivative with respect to y is 36xy^8.

learn more about "derivative ":- https://brainly.com/question/23819325

#SPJ11

A person with a high school diploma would earn $255,000 more than a person with a GED over a 30-year career.

To calculate how much more money a person with a high school diploma would earn than a person with a GED over a 30-year career, we need to find the difference in their annual salaries and then multiply it by 30.

The annual salary difference between a high school diploma and a GED is $27,500 - $19,000 = $8,500.

To calculate the total difference over a 30-year career, we multiply the annual salary difference by 30: $8,500 * 30 = $255,000.

Therefore, a person with a high school diploma would earn $255,000 more than a person with a GED over a 30-year career. The correct answer is $255,000.

To know more about high school diploma,

https://brainly.com/question/14727224

#SPJ11

Answer:

The answer is

110.4 in1d.p

110 to the nearest whole number

110.40 to the nearest hundredth

Step-by-step explanation:

48×2.3=110.4 in 1.d.p

To determine the height of the tree using proportions, we can set up a ratio between the lengths of the shadows and the corresponding heights.

Let's assume:

Andy's height: 5.6 ft

Andy's shadow length: 4.2 ft

Tree's shadow length: 42.3 ft

Unknown tree height: x ft

The proportion can be set up as follows:

(Height of Andy) / (Length of Andy's shadow) = (Height of the tree) / (Length of the tree's shadow

Substituting the given values:

(5.6 ft) / (4.2 ft) = x ft / (42.3 ft)

To solve for x, we can cross-multiply:

(5.6 ft) * (42.3 ft) = (4.2 ft) * (x ft)

235.68 ft = 4.2 ft * x

Now, divide both sides of the equation by 4.2 ft to isolate x:

235.68 ft / 4.2 ft = x

x ≈ 56 ft

Therefore, the estimated height of the tree is approximately 56 feet.

Learn more about proportions Visit : brainly.com/question/1496357
#SPJ11

The type of factoring required for 3x²-22x + 34 = −1 is quadratic trinomial and the roots of the polynomial are x = 0, x = 2, and x = 3.

For the equation 3x²-22x + 34 = −1

We need to determine which type of factoring would be appropriate to solve this polynomial for its roots.

The type of factoring that should be used to solve this polynomial for its roots is "Quadratic Trinomial a ≠ 1.

Therefore, we will write the equation in the form ax²+bx+c = 0 so that we can factor it:

3x²-22x + 35 = 0

To factor this quadratic trinomial, we must find two numbers such that their product is 3 * 35 = 105 and their sum is -22.

These two numbers are -15 and -7.Then, we can factor the quadratic trinomial as (x-7)(3x-5) = 0.

The roots of the equation are x = 7 and x = 5/3.

Now, we will find the roots of the polynomial x³-5x²+6x = 0 by factoring out x from the left side.

We obtain x(x²-5x+6) = 0

Now, we will factor the quadratic trinomial x²-5x+6.

We need to find two numbers whose product is 6 and whose sum is -5. These numbers are -2 and -3.

Therefore, we can factor the quadratic trinomial as x(x-2)(x-3) = 0.

The roots of the polynomial are x = 0, x = 2, and x = 3.

The type of factoring required for 3x²-22x + 34 = −1 and the steps are taken to find the roots of x³-5x²+6x = 0.

To learn about factoring here:

https://brainly.com/question/19120517

#SPJ11

The expression cos^2(14°) − sin^2(14°) can be simplified using the identity cos^2(x) - sin^2(x) = cos(2x). This identity is derived from the double angle formula for cosine: cos(2x) = cos^2(x) - sin^2(x).

Using this identity, we can rewrite the given expression as cos(2*14°). We cannot simplify this any further without evaluating it, but we have reduced the expression to a simpler form.

The double angle formula for cosine is a useful tool in trigonometry that allows us to simplify expressions involving cosines and sines. It can be used to derive other identities, such as the half-angle formulas for sine and cosine, and it has applications in fields such as physics, engineering, and astronomy.

Overall, understanding trigonometric identities and their applications can help us solve problems more efficiently and accurately in a variety of contexts.

Learn more about expression  here:

https://brainly.com/question/14083225

#SPJ11

If the purchase price for a house is $445,500, and you put 5% down for a 30-year loan with a fixed rate of 6.25%, the monthly payment would be $2,605.87.Option (b) $2,605.87 is the correct answer.

How to find monthly payments?

For calculating monthly payments, we need to use the formula:

[tex]P = L[c(1 + c)^n]/[(1 + c)^n - 1][/tex]

where P is monthly payments is the loan amount is the interest rate is the number of months we know that the purchase price of a house is $445,500.

If you put a 5% down payment, the loan amount will be the difference between the purchase price and the down payment:

$445,500 - ($445,500 * 0.05)

= $423,225

We also know that the interest rate is 6.25% and the loan term is 30 years. We need to convert years into months by multiplying by 12:30 years × 12 months/year = 360 months now, we can substitute the values into the formula to find monthly payments:

[tex]P = $423,225[0.00521(1 + 0.00521)^{360}]/[(1 + 0.00521)^{360 - 1}][/tex]

= $2,605.87

Hence, the answer is option (b) $2,605.87.

To know more about purchase price visit:

https://brainly.com/question/27796445

#SPJ11

The set of functions {f1(x) = sin 2x, f2(x) = cos 2x, f3(x) = 2 − 4 sin2 x} is a) linearly dependent. Hence, the correct answer is (a) linearly dependent.

To determine whether the set of functions {f1(x) = sin 2x, f2(x) = cos 2x, f3(x) = 2 − 4 sin2 x} is linearly dependent or linearly independent, we need to check if there exist constants a1, a2, and a3, not all zero, such that:

a1 f1(x) + a2 f2(x) + a3 f3(x) = 0

where 0 denotes the zero function.

Now, let's substitute the expressions for the functions into the equation above:

[tex]a1 sin 2x + a2 cos 2x + a3 (2 - 4 sin^2 x) = 0[/tex]

We can simplify this expression using the identity sin^2 x + cos^2 x = 1:

[tex]a1 sin 2x + a2 cos 2x + a3 (2 - 4 cos^2 x) = 0[/tex]

Now, we can use the double angle formulas for sine and cosine to rewrite the above expression as follows:

[tex]a1 (2 sin x cos x) + a2 (2 cos^2 x - 1) + a3 (2 - 4 cos^2 x) = 0[/tex]

This can be further simplified as:

[tex](2a1 sin x cos x) + (2a2 cos^2 x) + (-a2) + (2a3) + (-4a3 cos^2 x) = 0[/tex]

Now, let's consider this expression as a polynomial in the variable x. For this polynomial to be identically zero (i.e., equal to zero for all values of x), the coefficients of each power of x must be zero. In particular, the constant term (i.e., the coefficient of x^0) must be zero. Therefore, we have:

a2 + 2a3 = 0

This implies that a2 = 2a3.

Now, let's consider the coefficient of [tex]cos^2 x[/tex]. We have:

2a2 - 4a3 = 0

This implies that a2 = 2a3.

Therefore, we have a2 = 2a3 and a2 = -2a1. Combining these equations, we get:

a1 = -a3

This shows that the coefficients a1, a2, and a3 are not all zero, and that they satisfy a1 = -a3.

for such more question on  linearly dependent.

https://brainly.com/question/10725000

#SPJ11

The set of functions {f1(x) = sin 2x, f2(x) = cos 2x, f3(x) = 2 − 4 sin2 x} is linearly dependent. This is because f3(x) can be expressed as a linear combination of f1(x) and f2(x), specifically f3(x) = 2 - 4sin^2(x) = 2 - 4(1-cos^2(x)) = 2 - 4 + 4cos^2(x) = 4cos^2(x) - 2 = 2(f2(x))^2 - 2(f1(x))^2.

Therefore, one of the functions in the set can be expressed as a linear combination of the others, making them linearly dependent. The answer is (a).

The set of functions {f1(x) = sin 2x, f2(x) = cos 2x, f3(x) = 2 − 4 sin^2 x} is:

c). linearly independent

Explanation:
A set of functions is linearly independent if no function in the set can be expressed as a linear combination of the other functions. In this case, f1(x) and f2(x) are orthogonal functions (meaning their inner product is zero), and f3(x) cannot be expressed as a linear combination of f1(x) and f2(x). Therefore, the set of functions is linearly independent.

Learn more about functions at: brainly.com/question/14418346

#SPJ11

The median number of hikes by Fatima compares to the median number by Paulia in that Fatima's median is higher than Paula's.

First, list out the number of hikes taken by both Fatima  and Paula from the dot plots.

Fatima hikes :

5, 5, 5, 6, 6, 7, 8

Paula hikes :

3, 3, 4, 4, 5, 6, 10

The median for Fatima is 6 miles as this is the middle number, holding the 4 th position out of 7 hikes. The median for Paula is 4 miles when the same format is used.

This shows that Fatima's median is higher than Paula's.

Find out more on median at https://brainly.com/question/10003873

#SPJ1

Simplifying the expression gives the equivalent expression as: [tex]\frac{b}{2a^{2} b^{3} } \sqrt[3]{15b}[/tex]

Some of the laws of exponents are:

- When multiplying by like bases, keep the same bases and add exponents.

- When raising a base to a power of another, keep the same base and multiply by the exponent.

- If dividing by equal bases, keep the same base and subtract the denominator exponent from the numerator exponent.  

The expression we want to solve is given as:

[tex]\sqrt[3]{\frac{75a^{7}b^{4} }{40a^{13}b^{9} } }[/tex]

Using laws of exponents, the bracket is simplified to get:

[tex]\sqrt[3]{\frac{75a^{7 - 13}b^{4 - 9} }{40} } } = \sqrt[3]{\frac{75a^{-6}b^{-5} }{40} } }[/tex]

This simplifies to get:

[tex]\frac{b}{2a^{2} b^{3} } \sqrt[3]{15b}[/tex]

Read more about Laws of Exponents at: https://brainly.com/question/11761858

#SPJ4

Answer:

----------------

The first term is given, 12.

Find the next three terms using the given formula:

So the first 4 terms are 12, 13, 15 and 19.

Based on the equation of the curve of best fit above, the amount of overall points LeBron James would have at the end of his career is 28,062 points.

In this exercise, we would plot the rookie season-points on the x-axis (x-coordinates) of a scatter plot while the overall points would be plotted on the y-axis (y-coordinate) of the scatter plot through the use of Microsoft Excel.

On the Microsoft Excel worksheet, you should right click on any data point on the scatter plot, select format trend line, and then tick the box to display an equation of the curve of best fit (trend line) on the scatter plot.

Based on the scatter plot shown below, which models the relationship between the rookie season-points and the overall points, an equation of the curve of best fit is modeled as follows:

y = 5.74x + 18568

Based on the equation of the curve of best fit above, the amount of overall points LeBron James would have at the end of his career can be calculated as follows;

y = 5.74x + 18568

y = 5.74(1,654) + 18568

y = 28,061.96 ≈ 28,062 points.

Read more on curve of best fit here: brainly.com/question/27311887

#SPJ1

On the basis of a random sample of 10 men who have been married for 5 to 10 years, the expected blood pressure of Saeed is 98 mmHg. The correct answer is option d.

The regression model that has been produced in this case is as follows:

V = 98 +4.03 x

This regression model shows that there is a relationship between the number of years married and blood pressure of a person.

Here, V represents the systolic blood pressure (in mmHg) and x represents the number of years married.

Now, we need to find the systolic blood pressure of Saeed who has just got married. The given regression model can be used to calculate the expected blood pressure of Saeed since it predicts the blood pressure based on the number of years married.

So, substituting the value of x (which is 0 since Saeed has just got married) in the equation, we get:

V = 98 +4.03(0)V = 98

Hence, the expected blood pressure of Saeed is 98 mmHg.

Answer: d. 98 mmHg

Learn more about the regression model:

https://brainly.com/question/30621842

#SPJ11

The correct answer is d) None of these choices, because A sample of size 25 is selected at random from a finite population.

The population size cannot be determined solely based on the finite population correction factor and the sample size. Additional information, such as the size of the correction factor, is needed to calculate the population size accurately.

In statistics, the finite population correction factor is used when the sample size is a significant proportion of the population. It adjusts the standard error of the sample mean to account for the finite population size. However, the correction factor alone does not provide enough information to determine the population size.

To calculate the population size, either the sample mean or the proportion of the population that possesses a certain characteristic needs to be known.

Learn more about sample size

brainly.com/question/30174741

#SPJ11

The new equation after eliminating the x-terms is 8y = 64

From the question, we have the following parameters that can be used in our computation:

2x+3y=4

−2x+5y=60

Express properly

So, we have

2x + 3y = 4

−2x + 5y = 60

Add the two equations to eliminate x

So, we have

3y + 5y = 4 + 60

Evaluate the like terms

8y = 64

Hence, the new equation after eliminating the x-terms is 8y = 64

Read more about system of equations at

https://brainly.com/question/13729904

#SPJ1

The probability that the sample mean will be larger than 49 is 0.4452 (option b).

Here we know the following values,

Population mean (μ) = 52

Population standard deviation (σ) = 20

Sample size (n) = 50

Value of interest (x) = 49 (mean larger than 49)

First, we need to standardize the value of interest (x) using the formula for standardizing a value:

Z = (x - μ) / (σ / √n)

Here, Z represents the z-score, which tells us how many standard deviations the value of interest is away from the mean.

Plugging in the values, we get:

Z = (49 - 52) / (20 / √50) = 0.606

According to the the z - table, the resulting probability is 0.4452.

Hence the correct option is (b).

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

We have:x + (x - 26) = 88Simplify:2x - 26 = 88Solve for x:2x = 114x = 57Therefore, the first person receives 57 objects, and the second person receives x - 26 = 31 objects.

1. Let x be the number of balls in the first group. Then the second group has 3x balls, and the third group has x − 4 balls. We know that the sum of the balls in the three groups is 76. Hence we have:x + 3x + (x - 4) = 76Simplify:x + 3x + x - 4 = 76Solve for x:5x = 80x = 16Therefore, the first group has 16 balls, the second group has 3x = 48 balls, and the third group has x - 4 = 12 balls.2. Let x be the number of objects received by the first person. Then the second person receives x - 26 objects. We know that the sum of the objects received by the two people is 88. Hence we have:x + (x - 26) = 88Simplify:2x - 26 = 88Solve for x:2x = 114x = 57Therefore, the first person receives 57 objects, and the second person receives x - 26 = 31 objects.

Learn more about Objects here,An object of mass 1.2 kg is moving with a velocity of 2.0m/s when it is acted on by a force of

4.0 N. The velocity of th...

https://brainly.com/question/30317885

#SPJ11

The measure of angle CFD is 165 degrees.

In the given figure, we have lines AC and EF that are parallel, and lines BE and CF that are parallel as well.

We are given that the measure of angle BCF is 67° and the measure of angle GAR is 98°. We need to determine the measure of angle CFD.

Due to the parallel lines AC and EF, we can establish that angle BCF and angle ACF are corresponding angles and hence have equal measures.

Therefore, angle ACF is also 67°.

Now, angle CFD is an exterior angle formed when line CF intersects with transversal line GD.

According to the Exterior Angle Theorem, the measure of the exterior angle is equal to the sum of the measures of the two interior angles that are adjacent to it.

In this case, angle CFD is the sum of angle ACF and angle GAR.

Substituting the known values, we have angle CFD = 67° + 98° = 165°.

∠CFD = 165°

For similar question on Exterior Angle Theorem

https://brainly.com/question/17307144

#SPJ11